summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-23samples/pktgen: Correct comments about the thread configBen Hutchings
They all claimed to be two CPU examples using eth1, eth2 but that is only true in one case! Rob Jones pointed out spelling and grammar errors here, which I've also corrected. Cc: Rob Jones <rob.jones@codethink.co.uk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23samples/pktgen: Delete unused function pg()Ben Hutchings
This function is not used and wouldn't do anything useful as pktgen does not have an 'inject' command. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23samples/pktgen: Add sample scripts for pktgen facilityBen Hutchings
These are Robert Olsson's samples which used to be available from <ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/> but currently are not. Change the documentation to refer to these consistently as 'sample scripts', matching the directory name used here. Cc: Robert Olsson <robert@herjulf.se> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23pktgen: Fix grammar errors and some poor wording in documentationBen Hutchings
Thanks to Rob Jones for suggesting some of the changes. Cc: Rob Jones <rob.jones@codethink.co.uk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23pktgen: Delete the original date from documentationBen Hutchings
This has been updated quite a few times since 2004, and git can keep track of the actual date for us. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23i40evf: don't wait foreverMitch Williams
Under rare circumstances, after a reset, set_rx_mode might get called while the watchdog is running, which will cause a deadlock on the critical section lock. To correct this, add a counter and give up trying to get the lock after fifty tries. Log a message if this happens but don't take any other action. Because this happens after a reset, all of the Rx filters are still in place and the device won't lose connectivity. We can also get stuck during shutdown, if the PF has stopped communicating with us, or if a reset is occurring. If we can't get the lock after a reasonable amount of time, just error out. Something else bad is happening anyway, so adding this filter is the least of our concern right now. Change-ID: I159731e2a82a06b389ee31b34ce336548e05baa0 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40evf: refactor resetMitch Williams
A recent change to the shutdown flow messed up the reset flow. Since i40evf_down now holds the critical section lock, we cannot call it from the reset handler, which also holds the lock. To do so causes a deadlock accompanied by wailing and gnashing of teeth. This is easily triggered by running an ethtool self-test on the PF device. Instead, we move the relevant portions of i40evf_down into the reset handler and bend them to our will. Additionally, we can optimize the reinit path by not deleting the MAC and VLAN filters and then adding them back again. Instead, we just set the 'add' flag and let the watchdog resynchronize the filter list with the PF driver. We also reword a few messages to make them more consistent with the rest of the driver. Change-ID: I03dd92ae736f7719fca3564b12a2cf9b98c6cb18 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40evf: disable NAPI polling soonerMitch Williams
When closing the interface, disable NAPI polling before any other activities. This fixes an occasional panic during close caused by the driver trying to delete and clean rings at the same time. Change-ID: Ib4d427b13d310258ea85b248d535da70ecf0c1e9 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e: Fix i40e_ndo_set_vf_spoofchkGreg Rose
The netdev op that allows the operator to turn MAC/VLAN spoof checking on and off did not include the flag for VLAN spoof checking. This patch fixes that problem. Change-ID: Ib4c9e639024a854592d97af22706544881ac3fcb Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e/i40evf: Bump Driver VersionsSravanthi Tangeda
Bump i40e to 1.2.8 and i40evf to 1.2.2 Change-ID: I64f47c3367ea8ff2a53068e895d7a1f60726c871 Signed-off-by: Sravanthi Tangeda <sravanthi.tangeda@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e/i40evf: Remove unused variable an_enable and function update_link_infoCatherine Sullivan
An_enable was never used only set so lets remove it. The function update_link_info only did two things, call get_link_info and set an_enabled. Therefore we should also remove update_link_info and change all references to it to get_link_info. Change-ID: Ie3022680fa7a94bfd495a4f5fc76a73701d85569 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e: Fix the EMPR interrupt received handlingAnjali Singhai Jain
We shouldn't trigger another EMPR when we receive an EMPR event. This patch handles EMPR event reception with a different state so that we can do the right thing for NVM. Change-ID: I9cac70b3658600f016a65beb6fb157e1c1f9adf9 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e/i40evf: i40e_register.h updatesAnjali Singhai Jain
Some registers have been removed so take them out and stop updating and looking at them. Change-ID: I33da922c8de993a94dd8b8d8a2ae2146b8ca1a27 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e: Use #define for the VSI connection typeNeerav Parikh
Use #defined VSI connection type values instead of using magic numbers. Change-ID: I2f6cf7bf394d391e1c0fe61779e9e4ad8858154a Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e/i40evf: restrict VC opcodes to their initial valuesNicholas Nunley
Until the time a more robust versioning scheme is needed/implemented all established virtual channel opcode values should remain consistent between updates to the opcode enum. This patch repositions I40E_VIRTCHNL_OP_CONFIG_RSS to the end of the enum. In its current position this opcode displaces the initial value of I40E_VIRTCHNL_OP_EVENT and will cause PF/VF compatibility issues. Going forward the expectation is either: a) All future opcode additions will be added as the last element of the enum. Once VF drivers start making use of the new commands the virtual channel version will need to be incremented and drivers will need to implement a simple version check whereby VF drivers can only load on PFs with a >= version. b) or, if needed, design and implement a more complicated API negotiation capability. In either case PF drivers should always maintain backwards compatibility with earlier VF driver versions. Change-ID: Ie245daa09a231b6680ed793d648bdcc76caefe58 Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e/i40evf: Refactor the receive routinesMitch Williams
Split the receive hot path code into two, one for packet split and one for single buffer. This improves receive performance since we only need to check if the ring is in packet split mode once per NAPI poll time, not several times per packet. The single buffer code is further improved by the removal of a bunch of code and several variables that are not needed. On a receive-oriented test this can improve single-threaded throughput. Also refactor the packet split receive path to use a fixed buffer for headers, like ixgbe does. This vastly reduces the number of DMA mappings and unmappings we need to do, allowing for much better performance in the presence of an IOMMU. Lastly, correct packet split descriptor types now that we are actually using them. Change-ID: I3a194a93af3d2c31e77ff17644ac7376da6f3e4b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e: rename debugfs clear_stats optionShannon Nelson
Change debugfs command from "clear_stats pf" to "clear_stats port" to be clearer what the action is. Also, limit the action to the base PF, not the NPAR partitions. Change-ID: I22aa39c0962d83a83a985097b1000ed7f8c66f3f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23i40e: update Shadow RAM read/write functionsKamil Krawczyk
This change is to refactor the read/write functions to support future work. Change-ID: I13150d5e3042f2c617362c0140dc7e6473ebcdee Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23igbvf: cleanup msleep() and min/max() usageJeff Kirsher
Fixed a few cases of when we used msleep() when we should have been using usleep_range(). Also updated the usage of min/max() to use min_t/max_t(). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2015-02-23igbvf: Fix code comments and whitespaceJeff Kirsher
Fix the code comments to align with the drivers/net/ commenting style. Also fix other checkpatch errors such as using tabs where possible and properly wrap lines to conform to the 80 char limit (unless it is a string). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2015-02-23e1000e: initial support for i219David Ertman
i219 is the next-generation LOM that will be available on systems with the Sunrise Point Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support for the device. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Carmen Edwards <carmenx.edwards@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-23Merge branch 'be2net-next'David S. Miller
Sathya Perla says: ==================== be2net: patch set Hi Dave, the following patch set reduces code duplication in probe/pci-resume/eeh-resume and remove/pci-suspend/eeh-error and UE-error detect/recovery paths. New helper routines have been introduced for this purpose. Pls apply this set to the net-next tree. Thanks! Patch 1 refactors the alloc/free code of adapter struct's fields into a new set of helper routines -- be_drv_init/cleanup(). Patch 2 gets rid of the be_get_initial_config() routine as be_get_config() is the place holder for related code. Patch 3 introduces a new helper routine be_func_init() to execute the initialization code used in probe/pci-resume/eeh-resume to remove code duplication. Patch 4 introduces a wrapper for scheduling/canceling error detection task on similar lines to the be_worker task. Patch 5 refactors UE error detection and recovery code on similar lines to EEH code. Cleaning up resources is done in the error detection routine followed by error recovery. Patch 6 gets rid of the lancer_test_and_set_rdy_state() routine as the same code now available in be_func_init(). Patch 7 creates a new helper routine be_resume() for all the common code in be_probe(), be_pci_resume() and be_eeh_resume(), to reduce code duplication. Patch 8 creates a new helper routine be_cleanup() for all the common cleanup code duplicated in the suspend/EEH err detection paths. Patch 9 moves be_func_init() inside be_setup() as everytime be_setup() is called, the driver will have to wait for the function/FW to be be initialized. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: move be_func_init() call inside be_setup()Sathya Perla
Every time be_setup() is called, the driver will have to wait for the function/FW to be properly initialized. So, it make sense to move this call inside be_setup(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: refactor adapter resource cleanup sequence into be_cleanup()Kalesh AP
Most of the resource cleanup sequences performed in be_suspend(), be_eeh_err_detected() and be_err_detection_task() are same. Moved the common code to a new routine be_cleanup() to avoid code duplication. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: refactor adapter resource initialzation sequence into be_resume()Kalesh AP
Most of the adapter initialisation sequences performed in be_resume(), be_eeh_resume() and be_err_recover() are same. Renamed be_resume() to be_pci_resume() and moved the common code to a new routine be_resume() to avoid code duplication. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: remove code duplication relating to Lancer reset sequenceSathya Perla
The steps needed for Lancer's reset/initialization sequence are: a) wait for SLIPORT_STAUS RDY bit to be set b) set the SLIPORT_CONTROL IP bit c) repeat step "a" The code needed for this sequence is already covered by the be_func_init() routine (with minor modifications.) So, get rid of the lancer_test_and_set_rdy_state() and lancer_provisioning_error() routines that unnecessarily duplicate this code. Also fixed the error recovery function to take care of these changes Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: refactor error detect/recovery functionKalesh AP
Currently when an error is detected, the queue resources are being cleaned up in the recovery routine. The resources are better cleaned up in the error detection routine itself (similar to EEH code.) So, this patch re-factors error processing logic to follow the following sequence: - check if there is an error in adapter - if error, - cleanup resources - attempt recovery The patch renames lancer_recover_func() to be_err_recover() as this routine will be used in the future for error recovery on Skyhawk too. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: use a wrapper to schedule and cancel error detection taskSathya Perla
Also rename func_recovery_work/task to err_detection_work/task as error detection is the primary goal of this task while recovery is not guaranteed. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: refactor function initalization sequence into be_func_init()Sathya Perla
Function initialization sequence is executed in be_probe(), be_resume and be_eeh_resume(). Move this code to a new routine called be_func_init() to prevent code duplication. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: get rid of be_get_initial_config() call from be_probe()Sathya Perla
Most of the code to fetch the adapter state is in be_setup()->be_get_config(). So, move the code from be_get_initial_config() to be_get_config(). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23be2net: move adapter fields alloc/free code to new routinesSathya Perla
The members of be_adapter struct were being allocated in two separate routines -- be_ctrl_init() and be_stats_init(). Also, some other members were allocated elsewhere. This patch moves the alloc/free code into be_drv_init/cleanup() routines. The be_pci_map_bars() routine that was called from be_ctrl_init() is now called directly from be_probe(). The new routine be_drv_init() will now be the place-holder for allocating memory for any new be_adapter{} members in the future. Some routines needed to be moved to provide forward definitions for their calls. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22bridge: add vlan info to bridge setlink and dellink notification messagesRoopa Prabhu
vlan add/deletes are not notified to userspace today. This patch adds vlan info to bridge newlink/dellink notifications generated from the bridge driver. Notifications use the RTEXT_FILTER_BRVLAN_COMPRESSED flag to compress vlans into ranges whereever applicable. The size calculations does not take ranges into account for simplicity. This has the potential for allocating a larger skb than required. There is an existing inconsistency with bridge NEWLINK and DELLINK change notifications. Both generate NEWLINK notifications. Since its always a NEWLINK notification, this patch includes all vlans the port belongs to in the notification. The NEWLINK and DELLINK request messages however only include the vlans to be added and deleted. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22net: __aligned(size) is preferred over __attribute__((aligned(size)))Ameen Ali
Signed-off-by: Ameen Ali <AmeenAli023@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22batman-adv: Fix use of seq_has_overflowed()Joe Perches
net-next commit 6d91147d183c ("batman-adv: Remove uses of return value of seq_printf") incorrectly changed the overflow occurred return from -1 to 1. Change it back so that the test of batadv_write_buffer_text's return value in batadv_gw_client_seq_print_text works properly. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22net: Remove state argument from skb_find_text()Bojan Prtvar
Although it is clear that textsearch state is intentionally passed to skb_find_text() as uninitialized argument, it was never used by the callers. Therefore, we can simplify skb_find_text() by making it local variable. Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21ethtool: use "ops" name consistenty in ethtool_set_rxfh()Dan Carpenter
"dev->ethtool_ops" and "ops" are the same, but we should use "ops" everywhere to be consistent. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21ipv6: Replace "#include <asm/uaccess>" with "#include <linux/uaccess>"Alex W Slater
Fix checkpatch.pl warning "Use #include <linux/uaccess.h> instead of <asm/uaccess.h>" Signed-off-by: Alex W Slater <alex.slater.dev@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21Merge branch 'bna-next'David S. Miller
Rasesh Mody says: ==================== bna: Update the Driver and Firmware Version These patches re-brands the BNA driver to QLogic. The patches update the BNA driver version to 3.2.25.1 and firmware version to 3.2.5.1. The patches are tested against 3.19.0. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21bna: Update the Driver and Firmware VersionRasesh Mody
This patch updates the BNA driver version to 3.2.25.1 and the firmware version to 3.2.5.1 Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21bna: QLogic BR-series Adapters Driver RebrandingRasesh Mody
Re-brand the BNA driver to QLogic. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20sunvnet: failed trigger should not cause BUG_ON()David L Stevens
An error return from __vnet_tx_trigger() sets the TX descriptor to VIO_DESC_FREE while leaving port->tx_bufs[txi].skb set. This leads to a BUG_ON() the next time this descriptor is used. This patch frees the pending skb when getting a trigger error to match the VIO_DESC_FREE state. Signed-off-by: David L Stevens <david.stevens@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20bonding: simple code refactorMahesh Bandewar
Remove duplicate code. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20net: macb: Add big endian CPU supportArun Chandran
This patch converts all __raw_readl and __raw_writel function calls to their corresponding readl_relaxed and writel_relaxed variants. It also tells the driver to set ahb_endian_swp_mgmt_en bit in dma_cfg when the CPU is configured in big endian mode. Signed-off-by: Arun Chandran <achandran@mvista.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20Merge branch 'bnx2x-next'David S. Miller
Rasesh Mody says: ==================== bnx2-cnic: Driver Version Upgrades This patch set includes bnx2 and cnic drivers' re-branding changes, fix for a chip initialization issue and updates the bnx2 driver version to 2.2.6 and cnic driver version to 2.5.21. Please apply these patches to net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20bnx2-cnic: Driver Version UpdateRasesh Mody
This patch updates BNX2 driver version to 2.2.6 and CNIC driver version to 2.5.21. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20bnx2: Fix for Chip InitializationRasesh Mody
Do not enable filter SORT MODE in chip init routine. This patch addresses an issue where BCM5716 sporadically drops packets when changing multicast list. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20bnx2-cnic: Driver Rebranding ChangesRasesh Mody
This patch provides additional changes as a part of BNX2 and CNIC driver re-branding effort. Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20igmp: add __ip_mc_{join|leave}_group()Eric Dumazet
There is a need to perform igmp join/leave operations while RTNL is held. Make ip_mc_{join|leave}_group() wrappers around __ip_mc_{join|leave}_group() to avoid the proliferation of work queues. For example, vxlan_igmp_join() could possibly be removed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20hso: always read interface number from the current altsettingAleksander Morgado
Always read bInterfaceNumber from the current altsetting, not from the first one available in the altsetting array. This is coming from code review, not related to any specific bug. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20Merge branch 'ppc_bpf'David S. Miller
Denis Kirjanov says: ==================== bpf: Enable BPF JIT on ppc32 This patch series enables BPF JIT on ppc32. There are relatevily few chnages in the code to make it work. All test_bpf tests passed both on 7447a and P2041-based machines. Changelog: v1 - > v2: Reordered Kconfig patch in the series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 13:30:34 +0000