summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-01Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 6.4 merge window.
2023-05-01Revert "Input: xpad - fix support for some third-party controllers"Dmitry Torokhov
This reverts commit db7220c48d8d71476f881a7ae1285e1df4105409 because it causes crashes when trying to dereference xpad->dev->dev in xpad_probe() which has not been set up yet. Reported-by: syzbot+a3f758b8d8cb7e49afec@syzkaller.appspotmail.com Reported-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://groups.google.com/g/syzkaller-bugs/c/iMhTgpGuIbM Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-14dt-bindings: input: pwm-beeper: convert to dt schemaPeng Fan
Convert the binding doc to dt schema, and also fixed the example from fixed-regulator to regulator-fixed. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230407075259.1593739-1-peng.fan@oss.nxp.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-14Input: xpad - fix PowerA EnWired Controller guide buttonVicki Pfau
This commit explicitly disables the audio interface the same way the official driver does. This is needed for some controllers, such as the PowerA Enhanced Wired Controller for Series X|S (0x20d6:0x200e) to report the guide button. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230411031650.960322-3-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-14Input: xpad - add constants for GIP interface numbersVicki Pfau
Wired GIP devices present multiple interfaces with the same USB identification other than the interface number. This adds constants for differentiating two of them and uses them where appropriate Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230411031650.960322-2-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-13Input: cyttsp5 - fix sensing configuration data structurehrdl
Prior to this patch, the sensing configuration data was not parsed correctly, breaking detection of max_tch. The vendor driver includes this field. This change informs the driver about the correct maximum number of simultaneous touch inputs. Tested on a Pine64 PineNote with a modified touch screen controller firmware. Signed-off-by: hrdl <git@hrdl.eu> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20230411211651.3791304-1-git@hrdl.eu Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-13Input: synaptics-rmi4 - fix function name in kerneldocJiapeng Chong
No functional modification involved. drivers/input/rmi4/rmi_bus.c:300: warning: expecting prototype for rmi_register_function_handler(). Prototype was for __rmi_register_function_handler() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230209040710.111456-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-13Input: raspberrypi-ts - fix refcount leak in rpi_ts_probeMiaoqian Lin
rpi_firmware_get() take reference, we need to release it in error paths as well. Use devm_rpi_firmware_get() helper to handling the resources. Also remove the existing rpi_firmware_put(). Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver") Fixes: 3b8ddff780b7 ("input: raspberrypi-ts: Release firmware handle when not needed") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-10Input: edt-ft5x06 - select REGMAP_I2CDaniel Golle
After starting to use regmap API to access registers the edt-ft5x06 driver depends on symbols provided by REGMAP_I2C: edt-ft5x06.o: in function `edt_ft5x06_ts_probe': edt-ft5x06.c:1154: undefined reference to `__regmap_init_i2c' edt-ft5x06.o: in function `edt_ft5x06_ts_identify': edt-ft5x06.c:897: undefined reference to `__regmap_init_i2c' Make sure support for I2C regmap is actually selected by adding this dependency to Kconfig. Fixes: 9dfd9708ffba ("Input: edt-ft5x06 - convert to use regmap API") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/ZDRBExF1xmxalMZc@makrotopia.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-10Input: melfas_mip4 - report palm touchesJungHoon Hyun
The driver had the code to differentiate between finger and palm touches, but did not use this information when reporting contacts. Change it so that proper "tool" type is assigned to reported contacts. Signed-off-by: JungHoon Hyun <hyunjunghoon@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-09Input: pegasus-notetaker - check pipe type when probingSoumya Negi
Fix WARNING in pegasus_open/usb_submit_urb Syzbot bug: https://syzkaller.appspot.com/bug?id=bbc107584dcf3262253ce93183e51f3612aaeb13 Warning raised because pegasus_driver submits transfer request for bogus URB (pipe type does not match endpoint type). Add sanity check at probe time for pipe value extracted from endpoint descriptor. Probe will fail if sanity check fails. Reported-and-tested-by: syzbot+04ee0cb4caccaed12d78@syzkaller.appspotmail.com Signed-off-by: Soumya Negi <soumya.negi97@gmail.com> Link: https://lore.kernel.org/r/20230404074145.11523-1-soumya.negi97@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-09Input: cma3000_d0x - remove unneeded codeJiapeng Chong
Function input_set_abs_params() has already set EV_ABS bit for us. drivers/input/misc/cma3000_d0x.c:328 cma3000_init() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230407021343.63512-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - calculate points data length only onceDario Binacchi
It is pointless and expensive to calculate data in the interrupt that depends on the type of touchscreen, which is detected on the driver probe and cannot then be changed. So calculate the size of the data buffer on the driver probe, as well as the data retrieval command, and then use them in the ISR. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-10-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - unify the crc checkDario Binacchi
With this patch, the CRC is always verified by the same function, even in the case of accessing registers where the number of bytes is minimal. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-9-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - convert to use regmap APIDario Binacchi
It replaces custom read/write functions with regmap API, making the driver code more generic. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-8-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - don't print error messages with dev_dbg()Dario Binacchi
In some parts of the code, error messages were improperly printed with dev_dbg() calls. In those cases, dev_dbg() has been replaced with dev_err(). Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-7-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - remove code duplicationDario Binacchi
The use of the macros M06_REG_ADDR and M06_REG_CMD avoids code duplication without impacting the application load, and reduces the chances of errors or mistakes. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-6-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - don't recalculate the CRCDario Binacchi
There is no need to recalculate the CRC when the data has not changed. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-5-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - add spaces to ensure format specificationDario Binacchi
It adds spaces around '-' as recommended by the Linux coding style. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-4-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - remove unnecessary blank linesDario Binacchi
It removes unnecessary blank lines so that checkpatch doesn't complain anymore. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-3-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: edt-ft5x06 - fix indentationDario Binacchi
Matches the alignment to the open parenthesis as suggested by checkpatch. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-2-dario.binacchi@amarulasolutions.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-02Input: tsc2007 - enable cansleep pendown GPIOBenjamin Bara
When a hard IRQ is triggered, the soft IRQ, which decides if an actual pen down happened, should always be triggered. This enables the usage of "can_sleep" GPIO chips as "pen down" GPIO, as the value is not read during the hard IRQ anymore. This might be the case if the GPIO chip is an expander behind i2c. Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Input: Add KUnit tests for some of the input core helper functionsJavier Martinez Canillas
The input subsystem doesn't currently have any unit tests, let's add a CONFIG_INPUT_KUNIT_TEST option that builds a test suite to be executed with the KUnit test infrastructure. For now, only three tests were added for some of the input core helper functions that are trivial to test: * input_test_polling: set/get poll interval and set-up a poll handler. * input_test_timestamp: set/get input event timestamps. * input_test_match_device_id: match a device by bus, vendor, product, version and events capable of handling. But having the minimal KUnit support allows to add more tests and suites as follow-up changes. The tests can be run with the following command: $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/input/tests/ Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Enric Balletbo i Serra <eballetbo@redhat.com> config: powerpc-allnoconfig (https://download.01.org/0day-ci/archive/20230330/202303301815.kRKFM3NH-lkp@intel.com/config) Link: https://lore.kernel.org/r/20230330081831.2291351-1-javierm@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Input: add a new Novatek NVT-ts driverHans de Goede
Add a new driver for the Novatek i2c touchscreen controller as found on the Acer Iconia One 7 B1-750 tablet. Unfortunately the touchscreen controller model-number is unknown. Even with the tablet opened up it is impossible to read the model-number. Android calls this a "NVT-ts" touchscreen, but that may apply to other Novatek controller models too. This appears to be the same controller as the one supported by https://github.com/advx9600/android/blob/master/touchscreen/NVTtouch_Android4.0/NVTtouch.c but unfortunately that does not give us a model-number either. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20230326212308.55730-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Input: xpad - fix support for some third-party controllersVicki Pfau
Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and Gamesir-G3w, require a specific packet that the first-party XInput driver sends before it will start sending reports. It's not currently known what this packet does, but since the first-party driver always sends it's unlikely that this could cause issues with existing controllers. Co-authored-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230324040446.3487725-3-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-04-01Input: xpad - treat Qanba controllers as Xbox360 controllersPierre-Loup A. Griffais
They act that way in PC mode. Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230324040446.3487725-2-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-23dt-bindings: input: Drop unneeded quotesRob Herring
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # for mediatek,mt6779-keypad.yaml Link: https://lore.kernel.org/r/20230320234718.2930154-1-robh@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-23Input: xpad - add VID for Turtle Beach controllersVicki Pfau
This adds support for the Turtle Beach REACT-R and Recon Xbox controllers Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-23Input: xpad - remove unused field in VID/PID tableVicki Pfau
The list of specific VID/PID combinations for various controllers recently added a new field "xtype". However, this field isn't used, nor filled in the table itself, and was likely added by mistake and overlooked during review. Since this field isn't used, it's safe to remove. Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230225012147.276489-3-vi@endrift.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-23Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fixWerner Sembach
A lot of modern Clevo barebones have touchpad and/or keyboard issues after suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them have an external PS/2 port so this can safely be set for all of them. I'm not entirely sure if every device listed really needs all four quirks, but after testing and production use, no negative effects could be observed when setting all four. Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after boot and sometimes also after resume. However both are required for the keyboard to not fail completely sometimes after boot or resume. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230321191619.647911-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-19Input: alps - fix compatibility with -funsigned-charmsizanoen
The AlpsPS/2 code previously relied on the assumption that `char` is a signed type, which was true on x86 platforms (the only place where this driver is used) before kernel 6.2. However, on 6.2 and later, this assumption is broken due to the introduction of -funsigned-char as a new global compiler flag. Fix this by explicitly specifying the signedness of `char` when sign extending the values received from the device. Fixes: f3f33c677699 ("Input: alps - Rushmore and v7 resolution support") Signed-off-by: msizanoen <msizanoen@qtmlabs.xyz> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230320045228.182259-1-msizanoen@qtmlabs.xyz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-19Input: focaltech - use explicitly signed char typeJason A. Donenfeld
The recent change of -funsigned-char causes additions of negative numbers to become additions of large positive numbers, leading to wrong calculations of mouse movement. Change these casts to be explicitly signed, to take into account negative offsets. Fixes: 3bc753c06dd0 ("kbuild: treat char as always unsigned") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217211 Link: https://lore.kernel.org/r/20230318133010.1285202-1-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-19Input: xpad - fix incorrectly applied patch for MAP_PROFILE_BUTTONMatthias Benkmann
When commit commit fff1011a26d6 ("Input: xpad - add X-Box Adaptive Profile button") was applied, one hunk ended up in the wrong function; move it to where it belongs. Fixes: fff1011a26d6 ("Input: xpad - add X-Box Adaptive Profile button") Signed-off-by: Matthias Benkmann <matthias.benkmann@gmail.com> Link: https://lore.kernel.org/r/20230318162106.0aef4ba5@ninja Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-19Input: iqs62x-keys - suppress duplicated error message in .remove()Uwe Kleine-König
If a platform driver's remove callback returns non-zero the driver core emits an error message. In such a case however iqs62x_keys_remove() already issued a (better) message. So return zero to suppress the generic message. This patch has no other side effects as platform_remove() ignores the return value of .remove() after the warning. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318225110.261439-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: bcm_iproc_tsc - drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312131514.351603-4-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: sun4i-ts - drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/touchscreen/sun4i-ts.c:392:34: error: ‘sun4i_ts_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230312131514.351603-3-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: tm2-touchkey - drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/keyboard/tm2-touchkey.c:335:34: error: ‘tm2_touchkey_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312131514.351603-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: st-keyscan - drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/keyboard/st-keyscan.c:251:34: error: ‘keyscan_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312131514.351603-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: zinitix - use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144708.1542682-1-robh@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144708.1542751-1-robh@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Merge tag 'v6.3-rc2' into nextDmitry Torokhov
Merge with mainline to get of_property_present() and other newer APIs.
2023-03-17Input: hideep - optionally reset controller work mode to native HiDeep protocolHans de Goede
The HiDeep IST940E touchscreen controller used on the Lenovo Yoga Book X90F convertible comes up in HID mode by default. This works well on the X91F Windows model where the touchscreen is correctly described in ACPI and ACPI takes care of controlling the reset GPIO and regulators. But the X90F ships with Android and the ACPI tables on this model don't describe the touchscreen. Instead this is hardcoded in the vendor kernel. The vendor kernel uses the touchscreen in native HiDeep 20 (2.0?) protocol mode and switches the controller to this mode by writing 0 to reg 0x081e. Adjusting the i2c-hid code to deal with the reset-gpio and regulators on this non devicetree (but rather broken ACPI) convertible is somewhat tricky and the native protocol reports ABS_MT_PRESSURE and ABS_MT_TOUCH_MAJOR which are not reported in HID mode, so it is preferable to use the native mode. Add support to the hideep driver to reset the work-mode to the native HiDeep protocol to allow using it on the Lenovo Yoga Book X90F. This is guarded behind a new "hideep,force-native-protocol" boolean property, to avoid changing behavior on other devices. For the record: I did test using the i2c-hid driver with some quick hacks and it does work. The I2C-HID descriptor is available from address 0x0020, just like on the X91F Windows model. So far the new "hideep,force-native-protocol" property is only used on x86/ACPI (non devicetree) devs. IOW it is not used in actual devicetree files. The devicetree-bindings maintainers have requested properties like these to not be added to the devicetree-bindings, so the new property is deliberately not added to the existing devicetree-bindings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230311114726.182789-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: hideep - silence error in SW_RESET()Hans de Goede
On some models the first HIDEEP_SYSCON_WDT_CON write alone is enough to cause the controller to reset, causing the second write to fail: i2c-hideep_ts: write to register 0x52000014 (0x000001) failed: -121 Switch this write to a raw hideep_pgm_w_mem() to avoid an error getting logged in this case. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230311114726.182789-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: hideep - clean up some inconsistent indentingYang Li
Turn the space into a tab to Eliminate the follow smatch warning: drivers/input/touchscreen/hideep.c:470 hideep_program_nvm() warn: inconsistent indenting Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220429070103.4747-1-yang.lee@linux.alibaba.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI tableHans de Goede
The Android Lenovo Yoga Book X90F / X90L uses the same goodix touchscreen with 9 bytes touch reports for its touch keyboard as the already supported Windows Lenovo Yoga Book X91F/L, add a DMI match for this to the nine_bytes_report DMI table. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20230315134442.71787-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-17Input: i8042 - add quirk for Fujitsu Lifebook A574/HJonathan Denose
Fujitsu Lifebook A574/H requires the nomux option to properly probe the touchpad, especially when waking from sleep. Signed-off-by: Jonathan Denose <jdenose@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230303152623.45859-1-jdenose@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-03-12Linux 6.3-rc2v6.3-rc2Linus Torvalds
2023-03-12wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"Hector Martin
This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by: Hector Martin <marcan@marcan.st> Reported-by: Ilya <me@0upti.me> Reported-and-tested-by: Janne Grunau <j@jannau.net> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-12Merge tag 'tpm-v6.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
2023-03-12tpm: disable hwrng for fTPM on some AMD designsMario Limonciello
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439d58db ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 12:32:10 +0000