| Age | Commit message (Collapse) | Author |
|---|
|
"SHAREFLAG_ISOLATED_TRANSPORT" indicates that we should not reuse the socket
for this share (for future mounts). Mark the socket as server->nosharesock if
share flags returned include SHAREFLAG_ISOLATED_TRANSPORT.
See MS-SMB2 MS-SMB2 2.2.10 and 3.2.5.5
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change type of pcchunk->Length from u32 to u64 to match
smb2_copychunk_range arguments type. Fixes the problem where performing
server-side copy with CIFS_IOC_COPYCHUNK_FILE ioctl resulted in incomplete
copy of large files while returning -EINVAL.
Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Witek <pawel.ireneusz.witek@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The #if check is wrong, leading to a build failure:
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c: In function 'mxc_isi_channel_set_inbuf':
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:33:5: error: "CONFIG_ARCH_DMA_ADDR_T_64BIT" is not defined, evaluates to 0 [-Werror=undef]
33 | #if CONFIG_ARCH_DMA_ADDR_T_64BIT
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
This could just be an #ifdef, but it seems nicer to just remove the
check entirely. Apparently the only reason for the #ifdef is to avoid
another warning:
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:55:24: error: right shift count >= width of type [-Werror=shift-count-overflow]
But this is best avoided by using the lower_32_bits()/upper_32_bits()
helpers.
Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
added documentation to drm_dev_unregister clarifying that devres managed
devices allocated with devm_drm_dev_alloc do not require calls to
drm_dev_put.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Brandon Pollack <brpol@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425080240.3582324-1-brpol@chromium.org
|
|
This id was removed in commit b47018a778c1 ("platform/x86: intel_scu_ipc:
Remove Lincroft support"), saying it is only used on Moorestown,
but apparently the same id is also used on Medfield.
Tested on the Medfield based Motorola RAZR i smartphone.
Signed-off-by: Julian Winkler <julian.winkler1@web.de>
Link: https://lore.kernel.org/r/20230416154932.6579-1-julian.winkler1@web.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Implement DRM fbdev helpers for reading and writing framebuffer
memory with the respective fbdev functions. Removes duplicate
code.
v2:
* rename fb_cfb_() to fb_io_() (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-20-tzimmermann@suse.de
|
|
Move the existing I/O read and write code for I/O memory into
the new helpers fb_cfb_read() and fb_cfb_write(). Make them the
default fp_ops. No functional changes.
In the near term, the new functions will be useful to the DRM
subsystem, which currently provides it's own implementation. It
can then use the shared code. In the longer term, it might make
sense to revise the I/O helper's default status and make them
opt-in by the driver. Systems that don't use them would not
contain the code any longer.
v2:
* add detailed commit message (Javier)
* rename fb_cfb_() to fb_io_() (Geert)
* add fixes that got lost while moving the code (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-19-tzimmermann@suse.de
|
|
Push the test for info->screen_base from fb_read() and fb_write() into
the implementations of struct fb_ops.{fb_read,fb_write}. In cases where
the driver operates on info->screen_buffer, test this field instead.
While bothi fields, screen_base and screen_buffer, are stored in the
same location, they refer to different address spaces. For correctness,
we want to test each field in exactly the code that uses it.
v2:
* also test screen_base in pvr2fb (Geert)
* also test screen_buffer in ivtvfb, arcfb, broadsheetfb,
hecubafb, metronomefb and ssd1307fb (Geert)
* give a rational for the change (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-18-tzimmermann@suse.de
|
|
The file-op entry points fb_read() and fb_write() verify that
info->state has been set to FBINFO_STATE_RUNNING. Remove the same
test from the implementations of struct fb_ops.{fb_read,fb_write}.
v2:
* also remove test from ivtvfb, braodsheetfb, hecubafb and
metronomefb (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-17-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
Since the fb_sys_{read,write}() functions operate on the latter address
space, it is wrong to use .screen_base and .screen_buffer must be used
instead. This also gets rid of all the casting needed due to not using
the correct data type.
v2:
* add detailed commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-16-tzimmermann@suse.de
|
|
Always return the number of bytes read or written within the
framebuffer. Only return an errno code if framebuffer memory
was not touched. This is the semantics required by POSIX and
makes fb_read() and fb_write() compatible with IGT tests. [1]
This bug has been fixed for fb_write() long ago by
commit 6a2a88668e90 ("[PATCH] fbdev: Fix return error of
fb_write"). The code in fb_read() and the corresponding fb_sys_()
helpers was forgotten.
It can happen that copy_{from, to}_user() only partially copies
the given buffer. Take this into account when calculating the
number of bytes.
v2:
* consider return value from copy_{from,to}_user() (Geert)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/blob/master/tests/fbdev.c # 1
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-15-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-14-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-13-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-12-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-11-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-10-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-9-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-8-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-7-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-6-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-5-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-4-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-3-tzimmermann@suse.de
|
|
Use info->screen_buffer when reading and writing framebuffers in
system memory. It's the correct pointer for this address space.
The struct fb_info has a union to store the framebuffer memory. This can
either be info->screen_base if the framebuffer is stored in I/O memory,
or info->screen_buffer if the framebuffer is stored in system memory.
As the driver operates on the latter address space, it is wrong to use
.screen_base and .screen_buffer must be used instead. This also gets
rid of casting needed due to not using the correct data type.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230428122452.4856-2-tzimmermann@suse.de
|
|
Now that VKMS supports all values of rotation and reflection, drop the
"Rotation" task from the TODO list.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-7-mcanal@igalia.com
|
|
Currently, vkms supports the rotate-90, rotate-180, reflect-x and
reflect-y properties. Therefore, improve the vkms IGT test coverage by
adding the rotate-270 property to vkms. The rotation was implement by
software: rotate the way the blending occurs by making the source x axis
be the destination y axis and the source y axis be the destination x
axis and reverse-read the axis.
Now, vkms supports all possible rotation values.
Tested with igt@kms_rotation_crc@primary-rotation-270 [1],
and igt@kms_rotation_crc@sprite-rotation-270 [1].
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-6-mcanal@igalia.com
|
|
Currently, vkms only supports the rotate-180, reflect-x and reflect-y
properties. Therefore, improve the vkms IGT test coverage by adding the
rotate-90 property to vkms. The rotation was implement by software: rotate
the way the blending occurs by making the source x axis be the destination
y axis and the source y axis be the destination x axis.
Tested with igt@kms_rotation_crc@primary-rotation-90 [1],
igt@kms_rotation_crc@sprite-rotation-90 [1], and
igt@kms_rotation_crc@sprite-rotation-90-pos-100-0 [1].
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-5-mcanal@igalia.com
|
|
Currently, vkms only supports the reflect-x property. Therefore, add the
reflect-y property to vkms through a software implementation of the
operation. This is possible by reverse reading the y axis during the
blending.
Note that, by implementing the reflect-x and reflect-y properties, it is
also possible to add the rotate-180 property, as it is a combination
of those two properties.
Tested with igt@kms_rotation_crc@primary-reflect-y [1],
igt@kms_rotation_crc@sprite-reflect-y [1],
igt@kms_rotation_crc@primary-rotation-180,
igt@kms_rotation_crc@sprite-rotation-180,
and igt@kms_rotation_crc@cursor-rotation-180.
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-4-mcanal@igalia.com
|
|
Currently, vkms doesn't support any reflection property. Therefore, add
the reflect-x property to vkms through a software implementation of the
operation. This is possible by reverse reading the x axis during the
blending.
Tested with igt@kms_rotation_crc@primary-reflect-x [1] and
igt@kms_rotation_crc@sprite-reflect-x [1].
[1] https://patchwork.freedesktop.org/series/116025/
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418130525.128733-3-mcanal@igalia.com
|
|
Even when urgent BKOPS fails, the consumer will get stuck in runtime
suspend status. Like commit 1a5665fc8d7a ("scsi: ufs: core: WLUN suspend
SSU/enter hibern8 fail recovery"), trigger the error handler and return
-EBUSY to break the suspend.
Fixes: b294ff3e3449 ("scsi: ufs: core: Enable power management for wlun")
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Link: https://lore.kernel.org/r/20230425031721epcms2p5d4de65616478c967d466626e20c42a3a@epcms2p5
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When CONFIG_OF is disabled, the 'data' variable is not used at all
because of_match_node() turns into a dummy macro:
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c: In function 'mdp_comp_sub_create':
drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:1038:36: error: unused variable 'data' [-Werror=unused-variable]
1038 | const struct mtk_mdp_driver_data *data = mdp->mdp_data;
| ^~~~
Remove the variable again by moving the pointer dereference into the
of_match_node call.
Fixes: b385b991ef2f ("media: platform: mtk-mdp3: chip config split about subcomponents")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
gcc warns about some functions being unused when CONFIG_PM_SLEEP
is disabled:
drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:328:12: error: 'mxc_isi_pm_resume' defined but not used [-Werror=unused-function]
328 | static int mxc_isi_pm_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~
drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c:314:12: error: 'mxc_isi_pm_suspend' defined but not used [-Werror=unused-function]
314 | static int mxc_isi_pm_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~
Use the modern SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() helpers in place
of the old SET_SYSTEM_SLEEP_PM_OPS()/SET_RUNTIME_PM_OPS() ones.
By convention, use pm_ptr() to guard the reference to the operations.
This makes no difference as long as the driver requires CONFIG_PM,
but is what users of SET_RUNTIME_PM_OPS() are supposed to do.
Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When adding proper support for V4L2_FIELD_ALTERNATE it was missed that
this field format should trigger an interrupt for each field, not just
for the whole frame. Fix this by marking it as progressive in the
capture setup, which will then select the correct interrupt mode.
Tested on both Gen2 and Gen3 with the result of a doubling of the frame
rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is
now 50, which is expected for alternate field capture.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When doing format validation for NV12 the width and height should be
aligned to 32 pixels.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The VIN modules on Gen3 can not scale NV12, fail format validation if
the user tries. Currently no frames are produced if this is attempted.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Commit de614ac31955 ("MAINTAINERS: Add entries for Apple PWM driver") adds
an entry for Documentation/devicetree/bindings/pwm/pwm-apple.yaml, but
commit 87a3a3929c71 ("dt-bindings: pwm: Add Apple PWM controller") from
the same patch series actually adds the devicetree binding file with the
name apple,s5l-fpwm.yaml.
Adjust the file entry to the file actually added.
Fixes: de614ac31955 ("MAINTAINERS: Add entries for Apple PWM driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230424114043.22475-1-lukas.bulwahn@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Enable k10temp on this system.
[ bp: Massage. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230427053338.16653-3-mario.limonciello@amd.com
|
|
Commit
310e782a99c7 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe")
switched to using amd_smn_read() which relies upon the misc PCI ID used
by DF function 3 being included in a table. The ID for model 78h is
missing in that table, so amd_smn_read() doesn't work.
Add the missing ID into amd_nb, restoring s2idle on this system.
[ bp: Simplify commit message. ]
Fixes: 310e782a99c7 ("platform/x86/amd: pmc: Utilize SMN index 0 for driver probe")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230427053338.16653-2-mario.limonciello@amd.com
|
|
Fix kernel-doc warnings for cid_lock and use_cid_lock.
These comments are not in kernel-doc format.
kernel/sched/core.c:11496: warning: Cannot understand * @cid_lock: Guarantee forward-progress of cid allocation.
on line 11496 - I thought it was a doc line
kernel/sched/core.c:11505: warning: Cannot understand * @use_cid_lock: Select cid allocation behavior: lock-free vs spinlock.
on line 11505 - I thought it was a doc line
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230428031111.322-1-rdunlap@infradead.org
|
|
Several similar kernel warnings can be triggered,
[56605.607840] CPU0 PEBS record size 0, expected 32, config 0 cpuc->record_size=208
when the below commands are running in parallel for a while on SPR.
while true;
do
perf record --no-buildid -a --intr-regs=AX \
-e cpu/event=0xd0,umask=0x81/pp \
-c 10003 -o /dev/null ./triad;
done &
while true;
do
perf record -o /tmp/out -W -d \
-e '{ld_blocks.store_forward:period=1000000, \
MEM_TRANS_RETIRED.LOAD_LATENCY:u:precise=2:ldlat=4}' \
-c 1037 ./triad;
done
The triad program is just the generation of loads/stores.
The warnings are triggered when an unexpected PEBS record (with a
different config and size) is found.
A system-wide PEBS event with the large PEBS config may be enabled
during a context switch. Some PEBS records for the system-wide PEBS
may be generated while the old task is sched out but the new one
hasn't been sched in yet. When the new task is sched in, the
cpuc->pebs_record_size may be updated for the per-task PEBS events. So
the existing system-wide PEBS records have a different size from the
later PEBS records.
The PEBS buffer should be flushed right before the hardware is
reprogrammed. The new size and threshold should be updated after the
old buffer has been flushed.
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230421184529.3320912-1-kan.liang@linux.intel.com
|
|
It missed to convert a PERF_SAMPLE_BRANCH_STACK user to call the new
perf_sample_save_brstack() helper in order to update the dyn_size.
This affects AMD Zen3 machines with the branch-brs event.
Fixes: eb55b455ef9c ("perf/core: Add perf_sample_save_brstack() helper")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230427030527.580841-1-namhyung@kernel.org
|
|
swevents in perf_tp_event()
data->sample_flags may be modified in perf_prepare_sample(),
in perf_tp_event(), different swevents use the same on-stack
perf_sample_data, the previous swevent may change sample_flags in
perf_prepare_sample(), as a result, some members of perf_sample_data are
not correctly initialized when next swevent_event preparing sample
(for example data->id, the value varies according to swevent).
A simple scenario triggers this problem is as follows:
# perf record -e sched:sched_switch --switch-output-event sched:sched_switch -a sleep 1
[ perf record: dump data: Woken up 0 times ]
[ perf record: Dump perf.data.2023041209014396 ]
[ perf record: dump data: Woken up 0 times ]
[ perf record: Dump perf.data.2023041209014662 ]
[ perf record: dump data: Woken up 0 times ]
[ perf record: Dump perf.data.2023041209014910 ]
[ perf record: Woken up 0 times to write data ]
[ perf record: Dump perf.data.2023041209015164 ]
[ perf record: Captured and wrote 0.069 MB perf.data.<timestamp> ]
# ls -l
total 860
-rw------- 1 root root 95694 Apr 12 09:01 perf.data.2023041209014396
-rw------- 1 root root 606430 Apr 12 09:01 perf.data.2023041209014662
-rw------- 1 root root 82246 Apr 12 09:01 perf.data.2023041209014910
-rw------- 1 root root 82342 Apr 12 09:01 perf.data.2023041209015164
# perf script -i perf.data.2023041209014396
0x11d58 [0x80]: failed to process type: 9 [Bad address]
Solution: Re-initialize perf_sample_data after each event is processed.
Note that data->raw->frag.data may be accessed in perf_tp_event_match().
Therefore, need to init sample_data and then go through swevent hlist to prevent
reference of NULL pointer, reported by [1].
After fix:
# perf record -e sched:sched_switch --switch-output-event sched:sched_switch -a sleep 1
[ perf record: dump data: Woken up 0 times ]
[ perf record: Dump perf.data.2023041209442259 ]
[ perf record: dump data: Woken up 0 times ]
[ perf record: Dump perf.data.2023041209442514 ]
[ perf record: dump data: Woken up 0 times ]
[ perf record: Dump perf.data.2023041209442760 ]
[ perf record: Woken up 0 times to write data ]
[ perf record: Dump perf.data.2023041209443003 ]
[ perf record: Captured and wrote 0.069 MB perf.data.<timestamp> ]
# ls -l
total 864
-rw------- 1 root root 100166 Apr 12 09:44 perf.data.2023041209442259
-rw------- 1 root root 606438 Apr 12 09:44 perf.data.2023041209442514
-rw------- 1 root root 82246 Apr 12 09:44 perf.data.2023041209442760
-rw------- 1 root root 82342 Apr 12 09:44 perf.data.2023041209443003
# perf script -i perf.data.2023041209442259 | head -n 5
perf 232 [000] 66.846217: sched:sched_switch: prev_comm=perf prev_pid=232 prev_prio=120 prev_state=D ==> next_comm=perf next_pid=234 next_prio=120
perf 234 [000] 66.846449: sched:sched_switch: prev_comm=perf prev_pid=234 prev_prio=120 prev_state=S ==> next_comm=perf next_pid=232 next_prio=120
perf 232 [000] 66.846546: sched:sched_switch: prev_comm=perf prev_pid=232 prev_prio=120 prev_state=R ==> next_comm=perf next_pid=234 next_prio=120
perf 234 [000] 66.846606: sched:sched_switch: prev_comm=perf prev_pid=234 prev_prio=120 prev_state=S ==> next_comm=perf next_pid=232 next_prio=120
perf 232 [000] 66.846646: sched:sched_switch: prev_comm=perf prev_pid=232 prev_prio=120 prev_state=R ==> next_comm=perf next_pid=234 next_prio=120
[1] Link: https://lore.kernel.org/oe-lkp/202304250929.efef2caa-yujie.liu@intel.com
Fixes: bb447c27a467 ("perf/core: Set data->sample_flags in perf_prepare_sample()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230425103217.130600-1-yangjihong1@huawei.com
|
|
inlined callers
Apparently despite it being marked inline, the compiler
may not inline __down_read_common() which makes it difficult
to identify the cause of lock contention, as the blocked
function in traceevents will always be listed as
__down_read_common().
So this patch adds __always_inline annotation to the common
function (as well as the inlined helper callers) to force it to
be inlined so the blocking function will be listed (via Wchan)
in traceevents.
Fixes: c995e638ccbb ("locking/rwsem: Fold __down_{read,write}*()")
Reported-by: Tim Murray <timmurray@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20230503023351.2832796-1-jstultz@google.com
|
|
When adapting the original doc conversion to support 2 lanes, minItems
should've been added as well since the sensor supports either 1 or 2
lanes. Add minItems to make the validation happy again.
Fixes: 8d561d78aeab ("media: dt-bindings: ov2685: convert to dtschema")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230419-ov2685-dtschema-fixup-v1-1-c850a34b3a26@z3ntu.xyz
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add support for remapping CCS FBs on MTL to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-2-nirmoy.das@intel.com
|
|
Remove FLAT CCS check from XY_FAST_COLOR_BLT usage, thus
enabling MTL to use it.
Signed-off-by: Pallavi Mishra <pallavi.mishra@intel.com>
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230505144005.23480-1-nirmoy.das@intel.com
|
|
Refer to drmm_vram_helper_init() instead of the non-existent
drmm_vram_helper_alloc_mm().
Fixes: a5f23a72355d ("drm/vram-helper: Managed vram helpers")
Signed-off-by: Luc Ma <luc@sietium.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/64583db2.630a0220.eb75d.8f51@mx.google.com
|
|
When we enable MMP in ext4_multi_mount_protect() during mount or
remount, we end up calling sb_start_write() from write_mmp_block(). This
triggers lockdep warning because freeze protection ranks above s_umount
semaphore we are holding during mount / remount. The problem is harmless
because we are guaranteed the filesystem is not frozen during mount /
remount but still let's fix the warning by not grabbing freeze
protection from ext4_multi_mount_protect().
Cc: stable@kernel.org
Reported-by: syzbot+6b7df7d5506b32467149@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=ab7e5b6f400b7778d46f01841422e5718fb81843
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230411121019.21940-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Syzbot found the following issue:
EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support!
EXT4-fs (loop0): orphan cleanup on readonly fs
------------[ cut here ]------------
WARNING: CPU: 1 PID: 5067 at fs/ext4/mballoc.c:1869 mb_find_extent+0x8a1/0xe30
Modules linked in:
CPU: 1 PID: 5067 Comm: syz-executor307 Not tainted 6.2.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:mb_find_extent+0x8a1/0xe30 fs/ext4/mballoc.c:1869
RSP: 0018:ffffc90003c9e098 EFLAGS: 00010293
RAX: ffffffff82405731 RBX: 0000000000000041 RCX: ffff8880783457c0
RDX: 0000000000000000 RSI: 0000000000000041 RDI: 0000000000000040
RBP: 0000000000000040 R08: ffffffff82405723 R09: ffffed10053c9402
R10: ffffed10053c9402 R11: 1ffff110053c9401 R12: 0000000000000000
R13: ffffc90003c9e538 R14: dffffc0000000000 R15: ffffc90003c9e2cc
FS: 0000555556665300(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056312f6796f8 CR3: 0000000022437000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ext4_mb_complex_scan_group+0x353/0x1100 fs/ext4/mballoc.c:2307
ext4_mb_regular_allocator+0x1533/0x3860 fs/ext4/mballoc.c:2735
ext4_mb_new_blocks+0xddf/0x3db0 fs/ext4/mballoc.c:5605
ext4_ext_map_blocks+0x1868/0x6880 fs/ext4/extents.c:4286
ext4_map_blocks+0xa49/0x1cc0 fs/ext4/inode.c:651
ext4_getblk+0x1b9/0x770 fs/ext4/inode.c:864
ext4_bread+0x2a/0x170 fs/ext4/inode.c:920
ext4_quota_write+0x225/0x570 fs/ext4/super.c:7105
write_blk fs/quota/quota_tree.c:64 [inline]
get_free_dqblk+0x34a/0x6d0 fs/quota/quota_tree.c:130
do_insert_tree+0x26b/0x1aa0 fs/quota/quota_tree.c:340
do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375
do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375
do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375
dq_insert_tree fs/quota/quota_tree.c:401 [inline]
qtree_write_dquot+0x3b6/0x530 fs/quota/quota_tree.c:420
v2_write_dquot+0x11b/0x190 fs/quota/quota_v2.c:358
dquot_acquire+0x348/0x670 fs/quota/dquot.c:444
ext4_acquire_dquot+0x2dc/0x400 fs/ext4/super.c:6740
dqget+0x999/0xdc0 fs/quota/dquot.c:914
__dquot_initialize+0x3d0/0xcf0 fs/quota/dquot.c:1492
ext4_process_orphan+0x57/0x2d0 fs/ext4/orphan.c:329
ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
__ext4_fill_super fs/ext4/super.c:5516 [inline]
ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
get_tree_bdev+0x400/0x620 fs/super.c:1282
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Add some debug information:
mb_find_extent: mb_find_extent block=41, order=0 needed=64 next=0 ex=0/41/1@3735929054 64 64 7
block_bitmap: ff 3f 0c 00 fc 01 00 00 d2 3d 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Acctually, blocks per group is 64, but block bitmap indicate at least has
128 blocks. Now, ext4_validate_block_bitmap() didn't check invalid block's
bitmap if set.
To resolve above issue, add check like fsck "Padding at end of block bitmap is
not set".
Cc: stable@kernel.org
Reported-by: syzbot+68223fe9f6c95ad43bed@syzkaller.appspotmail.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230116020015.1506120-1-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
|
