| Age | Commit message (Collapse) | Author |
|---|
|
riscv equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
m68k equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes for SPI drivers, Krishna has been doing a bunch
of work on Tegra210 QuadSPI and found a bunch of issues there and
there's a couple of small fixes for other drivers too"
* tag 'spi-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra210-quad: Fix iterator outside loop
spi: tegra210-quad: Fix validate combined sequence
spi: tegra210-quad: set half duplex flag
spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits
spi: cadence-quadspi: Fix cancel the indirect read mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two fixes here, one driver fix for incorrect error codes and a fix in
the core to use ktime_get_boottime() in order to fix accounting of the
time regulators have been powered down over suspend. ktime_get()
pauses over suspend which is not what we want"
* tag 'regulator-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
regulator: max597x: Fix error return code in max597x_get_status
|
|
Miquel reported a warning in the MSI core which is triggered when
interrupts are freed via platform_msi_device_domain_free().
This code got reworked to use core functions for freeing the MSI
descriptors, but nothing took care to clear the msi_desc->irq entry, which
then triggers the warning in msi_free_msi_desc() which uses desc->irq to
validate that the descriptor has been torn down. The same issue exists in
msi_domain_populate_irqs().
Up to the point that msi_free_msi_descs() grew a warning for this case,
this went un-noticed.
Provide the counterpart of msi_domain_populate_irqs() and invoke it in
platform_msi_device_domain_free() before freeing the interrupts and MSI
descriptors and also in the error path of msi_domain_populate_irqs().
Fixes: 2f2940d16823 ("genirq/msi: Remove filter from msi_free_descs_free_range()")
Reported-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87mt4wkwnv.ffs@tglx
|
|
Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".
Commit b9599798f953 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.
Cc: stable@vger.kernel.org
Fixes: b9599798f953 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
[<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
[<00000003e3d02e82>] __might_resched+0x60a/0x668
[<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
[<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
[<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
[<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
[<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
[<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
[<00000003e3ce30f8>] kthread+0x2d0/0x398
[<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
[<00000003e60ccada>] ret_from_fork+0xa/0x40
The reason for this error report is that kprobes handling code failed
to restore irqs.
The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep <- original kprobe (saves kprobe_saved_imask)
enable_singlestep <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)
There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.
Cc: stable@vger.kernel.org
Fixes: 4ba069b802c2 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Avoid crashing the machine by checking
info->attrs[NL802154_ATTR_SCAN_TYPE] presence before de-referencing it,
which was the primary intend of the blamed patch.
Reported-by: Sanan Hasanov <sanan.hasanov@Knights.ucf.edu>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: a0b6106672b5 ("ieee802154: Convert scan error messages to extack")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230301154450.547716-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
This patch fixes a buffer overflow access of skb->data if
ieee802154_hdr_peek_addrs() fails.
Reported-by: lianhui tang <bluetlh@gmail.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230217042504.3303396-1-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Florian reported a regression and sent a patch with the following
changelog:
<quote>
There is a noticeable tcp performance regression (loopback or cross-netns),
seen with iperf3 -Z (sendfile mode) when generic retpolines are needed.
With SK_RECLAIM_THRESHOLD checks gone number of calls to enter/leave
memory pressure happen much more often. For TCP indirect calls are
used.
We can't remove the if-set-return short-circuit check in
tcp_enter_memory_pressure because there are callers other than
sk_enter_memory_pressure. Doing a check in the sk wrapper too
reduces the indirect calls enough to recover some performance.
Before,
0.00-60.00 sec 322 GBytes 46.1 Gbits/sec receiver
After:
0.00-60.04 sec 359 GBytes 51.4 Gbits/sec receiver
"iperf3 -c $peer -t 60 -Z -f g", connected via veth in another netns.
</quote>
It seems we forgot to upstream this indirect call mitigation we
had for years, lets do this instead.
[edumazet] - It seems we forgot to upstream this indirect call
mitigation we had for years, let's do this instead.
- Changed to INDIRECT_CALL_INET_1() to avoid bots reports.
Fixes: 4890b686f408 ("net: keep sk->sk_forward_alloc as small as possible")
Reported-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/netdev/20230227152741.4a53634b@kernel.org/T/
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301133247.2346111-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix bogus error report in selftests/netfilter/nft_nat.sh,
from Hangbin Liu.
2) Initialize last and quota expressions from template when
expr_ops::clone is called, otherwise, states are not restored
accordingly when loading a dynamic set with elements using
these two expressions.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_quota: copy content when cloning expression
netfilter: nft_last: copy content when cloning expression
selftests: nft_nat: ensuring the listening side is up before starting the client
====================
Link: https://lore.kernel.org/r/20230301222021.154670-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The single difference between returning 0 and returning an error code in
a platform remove callback is that in the latter case the platform core
emits a warning about the error being ignored.
at91wdt_remove() already emits a warning in the error case, so suppress
the more generic (and less helpful) one by returning 0.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230217095317.1213387-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
MT7621 SoC has a system controller node. Watchdog need to access to reset
status register. Ralink architecture and related driver are old and from
the beggining they are using some architecture dependent operations for
accessing this shared registers through 'asm/mach-ralink/ralink_regs.h'
header file. However this is not ideal from a driver perspective which can
just access to the system controller registers in an arch independent way
using regmap syscon APIs. Update Kconfig accordingly to select new added
dependencies and allow driver to be compile tested.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Instead of using static global definitions in driver code, refactor code
introducing a new watchdog driver data structure and use it along the
code.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com
[groeck: unsigned -> unsigned int]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
registers
MT7621 SoC provides a system controller node for accessing to some registers.
Add a phandle in this node to avoid using MIPS related arch operations and
includes in watchdog driver code.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-2-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Change bpf_dynptr_slice and bpf_dynptr_slice_rdwr to return NULL instead
of 0, in accordance with the codebase guidelines.
Fixes: 66e3a13e7c2c ("bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230302053014.1726219-1-joannelkoong@gmail.com
|
|
syzbot sent a hung task report and Eric explains that adversarial
receiver may keep RWIN at 0 for a long time, so we are not guaranteed
to make forward progress. Thread which took tx_lock and went to sleep
may not release tx_lock for hours. Use interruptible sleep where
possible and reschedule the work if it can't take the lock.
Testing: existing selftest passes
Reported-by: syzbot+9c0268252b8ef967c62e@syzkaller.appspotmail.com
Fixes: 79ffe6087e91 ("net/tls: add a TX lock")
Link: https://lore.kernel.org/all/000000000000e412e905f5b46201@google.com/
Cc: stable@vger.kernel.org # wait 4 weeks
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230301002857.2101894-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tls_setsockopt_conf()
ctx->crypto_send.info is not protected by lock_sock in
do_tls_getsockopt_conf(). A race condition between do_tls_getsockopt_conf()
and error paths of do_tls_setsockopt_conf() may lead to a use-after-free
or null-deref.
More discussion: https://lore.kernel.org/all/Y/ht6gQL+u6fj3dG@hog/
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20230228023344.9623-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.
[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff.
[Why & How]
Original change causes a regression. Revert
until fix is available.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:
shift exponent 4294966273 is too large for 32-bit type 'int'
[HOW]
In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Needs to set the default value of the LTTPR timeout after resume.
[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.
[ 489.885525] Call Trace:
[ 489.885525] <TASK>
[ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm]
[ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu]
[ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0
[ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 489.886132] ? __pm_runtime_resume+0x60/0x90
[ 489.886134] pci_device_remove+0x3e/0xb0
[ 489.886135] __device_release_driver+0x1ab/0x2a0
[ 489.886137] driver_detach+0xf3/0x140
[ 489.886138] bus_remove_driver+0x6c/0xf0
[ 489.886140] driver_unregister+0x31/0x60
[ 489.886141] pci_unregister_driver+0x40/0x90
[ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu]
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
‘ring’ set but not used [-Werror=unused-but-set-variable]
81 | struct amdgpu_ring *ring;
| ^~~~
ring is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
[How]
Defer the initialization of num_types to eliminate the error logs.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This will let us pass the kms_hdr.bpc_switch IGT
test.
The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.
Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")
This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.
v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
variable
Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Increase COMMAND_LINE_SIZE as the current default value is too low
for syzbot kernel command line.
There has been considerable discussion on this patch that has led to a
larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all
ports. That's not quite done yet, but it's gotten far enough we're
confident this is not a uABI change so this is safe.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr
[Palmer: it's not uabi]
Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When __cifs_readv() and __cifs_writev() extract pages from a user-backed
iterator into a BVEC-type iterator, they set ->bv_need_unpin to note
whether they need to unpin the pages later. However, in both cases they
examine the BVEC-type iterator and not the source iterator - and so
bv_need_unpin doesn't get set and the pages are leaked.
I think this may be responsible for the generic/208 xfstest failing
occasionally with:
WARNING: CPU: 0 PID: 3064 at mm/gup.c:218 try_grab_page+0x65/0x100
RIP: 0010:try_grab_page+0x65/0x100
follow_page_pte+0x1a7/0x570
__get_user_pages+0x1a2/0x650
__gup_longterm_locked+0xdc/0xb50
internal_get_user_pages_fast+0x17f/0x310
pin_user_pages_fast+0x46/0x60
iov_iter_extract_pages+0xc9/0x510
? __kmalloc_large_node+0xb1/0x120
? __kmalloc_node+0xbe/0x130
netfs_extract_user_iter+0xbf/0x200 [netfs]
__cifs_writev+0x150/0x330 [cifs]
vfs_write+0x2a8/0x3c0
ksys_pwrite64+0x65/0xa0
with the page refcount going negative. This is less unlikely than it seems
because the page is being pinned, not simply got, and so the refcount
increased by 1024 each time, and so only needs to be called around ~2097152
for the refcount to go negative.
Further, the test program (aio-dio-invalidate-failure) uses a 32MiB static
buffer and all the PTEs covering it refer to the same page because it's
never written to.
The warning in try_grab_page():
if (WARN_ON_ONCE(folio_ref_count(folio) <= 0))
return -ENOMEM;
then trips and prevents us ever using the page again for DIO at least.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Link: https://lore.kernel.org/r/CAH2r5mvaTsJ---n=265a4zqRA7pP+o4MJ36WCQUS6oPrOij8cw@mail.gmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in cifs_reconnect_tcon(). It
is set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.
Create a new cifs_wait_for_server_reconnect() helper that can be used
by both SMB2+ and CIFS reconnect code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Do not map STATUS_OBJECT_NAME_INVALID to -EREMOTE under non-DFS
shares, or 'nodfs' mounts or CONFIG_CIFS_DFS_UPCALL=n builds.
Otherwise, in the slow path, get a referral to figure out whether it
is an actual DFS link.
This could be simply reproduced under a non-DFS share by running the
following
$ mount.cifs //srv/share /mnt -o ...
$ cat /mnt/$(printf '\U110000')
cat: '/mnt/'$'\364\220\200\200': Object is remote
Fixes: c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests")
CC: stable@vger.kernel.org # 6.2
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix the loop check in netfs_extract_user_to_sg() for extraction from
user-backed iterators to do the body if npages > 0, not if npages < 0
(which it can never be).
This isn't currently used by cifs, which only ever extracts data from BVEC,
KVEC and XARRAY iterators at this level, user-backed iterators having being
decanted into BVEC iterators at a higher level to accommodate the work
being done in a kernel thread.
Found by smatch:
fs/netfs/iterator.c:139 netfs_extract_user_to_sg() warn: unsigned 'npages' is never less than zero.
Fixes: 018584697533 ("netfs: Add a function to extract an iterator into a scatterlist")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302261115.P3TQi1ZO-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y/yYnAhoAYDBKixX@kili
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_write_back_from_locked_folio() should return the number of bytes read,
but returns the result of ->async_writev(), which will be 0 on success. As
it happens, this doesn't prevent cifs_writepages_region() from working as
it will then examine and ignore the pages that are no longer dirty rather
than just skipping over them.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We have two pieces of code that does pretty much the same
comparison. This change reuses cifs_match_ipaddr within
match_address.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
match_address function matches the scope id for ipv6 addresses,
but cifs_match_ipaddr (which is another function used for comparison)
does not use scope id. Doing so with this change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix an uninitialised variable introduced in cifs.
Fixes: 3d78fe73fa12 ("cifs: Build the RDMA SGE list directly from an iterator")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-rdma@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The xas_for_each loops added into fs/cifs/file.c need to go round again if
indicated by xas_retry().
Fixes: b8713c4dbfa3 ("cifs: Add some helper functions")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Daniel Müller says:
====================
On Android, APKs (android packages; zip packages with somewhat
prescriptive contents) are first class citizens in the system: the
shared objects contained in them don't exist in unpacked form on the
file system. Rather, they are mmaped directly from within the archive
and the archive is also what the kernel is aware of.
For users that complicates the process of attaching a uprobe to a
function contained in a shared object in one such APK: they'd have to
find the byte offset of said function from the beginning of the archive.
That is cumbersome to do manually and can be fragile, because various
changes could invalidate said offset.
That is why for uprobes inside ELF files (not inside an APK), commit
d112c9ce249b ("libbpf: Support function name-based attach uprobes") added
support for attaching to symbols by name. On Android, that mechanism
currently does not work, because this logic is not APK aware.
This patch set introduces first class support for attaching uprobes to
functions inside ELF objects contained in APKs via function names. We
add support for recognizing the following syntax for a binary path:
<archive>!/<binary-in-archive>
(e.g., /system/app/test-app.apk!/lib/arm64-v8a/libc++.so)
This syntax is common in the Android eco system and used by tools such
as simpleperf. It is also what is being proposed for bcc [0].
If the user provides such a binary path, we find <binary-in-archive>
(lib/arm64-v8a/libc++.so in the example) inside of <archive>
(/system/app/test-app.apk). We perform the regular ELF offset search
inside the binary and add that to the offset within the archive itself,
to retrieve the offset at which to attach the uprobe.
[0] https://github.com/iovisor/bcc/pull/4440
Changelog
---------
v3->v4:
- use ERR_PTR instead of libbpf_err_ptr() in zip_archive_open()
- eliminated err variable from elf_find_func_offset_from_archive()
v2->v3:
- adjusted zip_archive_open() to report errno
- fixed provided libbpf_strlcpy() buffer size argument
- adjusted find_cd() to handle errors better
- use fewer local variables in get_entry_at_offset()
v1->v2:
- removed unaligned_* types
- switched to using __u32 and __u16
- switched to using errno constants instead of hard-coded negative values
- added another pr_debug() message
- shortened central_directory_* to cd_*
- inlined cd_file_header_at_offset() function
- bunch of syntactical changes
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
This change adds support for attaching uprobes to shared objects located
in APKs, which is relevant for Android systems where various libraries
may reside in APKs. To make that happen, we extend the syntax for the
"binary path" argument to attach to with that supported by various
Android tools:
<archive>!/<binary-in-archive>
For example:
/system/app/test-app/test-app.apk!/lib/arm64-v8a/libc++_shared.so
APKs need to be specified via full path, i.e., we do not attempt to
resolve mere file names by searching system directories.
We cannot currently test this functionality end-to-end in an automated
fashion, because it relies on an Android system being present, but there
is no support for that in CI. I have tested the functionality manually,
by creating a libbpf program containing a uretprobe, attaching it to a
function inside a shared object inside an APK, and verifying the sanity
of the returned values.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-4-deso@posteo.net
|
|
This change splits the elf_find_func_offset() function in two:
elf_find_func_offset(), which now accepts an already opened Elf object
instead of a path to a file that is to be opened, as well as
elf_find_func_offset_from_file(), which opens a binary based on a
path and then invokes elf_find_func_offset() on the Elf object. Having
this split in responsibilities will allow us to call
elf_find_func_offset() from other code paths on Elf objects that did not
necessarily come from a file on disk.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-3-deso@posteo.net
|
|
This change implements support for reading zip archives, including
opening an archive, finding an entry based on its path and name in it,
and closing it.
The code was copied from https://github.com/iovisor/bcc/pull/4440, which
implements similar functionality for bcc. The author confirmed that he
is fine with this usage and the corresponding relicensing. I adjusted it
to adhere to libbpf coding standards.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Michał Gregorczyk <michalgr@meta.com>
Link: https://lore.kernel.org/bpf/20230301212308.1839139-2-deso@posteo.net
|
|
In commit d96d937d7c5c ("bpf: Add __uninit kfunc annotation"), the
__uninit kfunc annotation was documented in kfuncs.rst. You have to
fully underline a section in rst, or the build will issue a warning that
the title underline is too short:
./Documentation/bpf/kfuncs.rst:104: WARNING: Title underline too short.
2.2.2 __uninit Annotation
--------------------
This patch fixes that title underline.
Fixes: d96d937d7c5c ("bpf: Add __uninit kfunc annotation")
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230301194910.602738-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In commit 66e3a13e7c2c ("bpf: Add bpf_dynptr_slice and
bpf_dynptr_slice_rdwr"), the bpf_dynptr_slice() and
bpf_dynptr_slice_rdwr() kfuncs were added to BPF. These kfuncs included
doxygen headers, but unfortunately those headers are not properly
formatted according to [0], and causes the following warnings during the
docs build:
./kernel/bpf/helpers.c:2225: warning: \
Excess function parameter 'returns' description in 'bpf_dynptr_slice'
./kernel/bpf/helpers.c:2303: warning: \
Excess function parameter 'returns' description in 'bpf_dynptr_slice_rdwr'
...
This patch fixes those doxygen comments.
[0]: https://docs.kernel.org/doc-guide/kernel-doc.html#function-documentation
Fixes: 66e3a13e7c2c ("bpf: Add bpf_dynptr_slice and bpf_dynptr_slice_rdwr")
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230301194910.602738-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Applications need to be able to program the SBI implementation specific
or custom firmware events in addition to the standard firmware events.
Remove a check in the driver that prohibits the programming of the custom
firmware events.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230208074314.3661406-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
expected messages'
Eduard Zingerman says:
====================
This patch allows to specify program flags and multiple verifier log
messages for the test_loader kind of tests. For example:
tools/testing/selftets/bpf/progs/foobar.c:
SEC("tc")
__success __log_level(7)
__msg("first message")
__msg("next message")
__flag(BPF_F_ANY_ALIGNMENT)
int buz(struct __sk_buff *skb)
{ ... }
It was developed by Andrii Nakryiko ([1]), I reused it in a
"test_verifier tests migration to inline assembly" patch series ([2]),
but the series is currently stuck on my side.
Andrii asked to spin this particular patch separately ([3]).
[1] https://lore.kernel.org/bpf/CAEf4BzZH0ZxorCi7nPDbRqSK9f+410RooNwNJGwfw8=0a5i1nw@mail.gmail.com/
[2] https://lore.kernel.org/bpf/20230123145148.2791939-1-eddyz87@gmail.com/
[3] https://lore.kernel.org/bpf/20230123145148.2791939-1-eddyz87@gmail.com/T/#m52e806c5a679a2aa8f484d011be7ec105939127a
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Extend __flag attribute by allowing to specify one of the following:
* BPF_F_STRICT_ALIGNMENT
* BPF_F_ANY_ALIGNMENT
* BPF_F_TEST_RND_HI32
* BPF_F_TEST_STATE_FREQ
* BPF_F_SLEEPABLE
* BPF_F_XDP_HAS_FRAGS
* Some numeric value
Extend __msg attribute by allowing to specify multiple exepcted messages.
All messages are expected to be present in the verifier log in the
order of application.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230301175417.3146070-2-eddyz87@gmail.com
[ Eduard: added commit message, formatting, comments ]
|
|
Viktor Malik says:
====================
Fixing several issues reported by Coverity and Clang Static Analyzer
(scan-build) for libbpf, mostly removing unnecessary symbols and
assignments.
No functional changes should be introduced.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
