summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-20net: bridge: switchdev: don't notify FDB entries with "master dynamic"Vladimir Oltean
There is a structural problem in switchdev, where the flag bits in struct switchdev_notifier_fdb_info (added_by_user, is_local etc) only represent a simplified / denatured view of what's in struct net_bridge_fdb_entry :: flags (BR_FDB_ADDED_BY_USER, BR_FDB_LOCAL etc). Each time we want to pass more information about struct net_bridge_fdb_entry :: flags to struct switchdev_notifier_fdb_info (here, BR_FDB_STATIC), we find that FDB entries were already notified to switchdev with no regard to this flag, and thus, switchdev drivers had no indication whether the notified entries were static or not. For example, this command: ip link add br0 type bridge && ip link set swp0 master br0 bridge fdb add dev swp0 00:01:02:03:04:05 master dynamic has never worked as intended with switchdev. It causes a struct net_bridge_fdb_entry to be passed to br_switchdev_fdb_notify() which has a single flag set: BR_FDB_ADDED_BY_USER. This is further passed to the switchdev notifier chain, where interested drivers have no choice but to assume this is a static (does not age) and sticky (does not migrate) FDB entry. So currently, all drivers offload it to hardware as such, as can be seen below ("offload" is set). bridge fdb get 00:01:02:03:04:05 dev swp0 master 00:01:02:03:04:05 dev swp0 offload master br0 The software FDB entry expires $ageing_time centiseconds after the kernel last sees a packet with this MAC SA, and the bridge notifies its deletion as well, so it eventually disappears from hardware too. This is a problem, because it is actually desirable to start offloading "master dynamic" FDB entries correctly - they should expire $ageing_time centiseconds after the *hardware* port last sees a packet with this MAC SA - and this is how the current incorrect behavior was discovered. With an offloaded data plane, it can be expected that software only sees exception path packets, so an otherwise active dynamic FDB entry would be aged out by software sooner than it should. With the change in place, these FDB entries are no longer offloaded: bridge fdb get 00:01:02:03:04:05 dev swp0 master 00:01:02:03:04:05 dev swp0 master br0 and this also constitutes a better way (assuming a backport to stable kernels) for user space to determine whether the kernel has the capability of doing something sane with these or not. As opposed to "master dynamic" FDB entries, on the current behavior of which no one currently depends on (which can be deduced from the lack of kselftests), Ido Schimmel explains that entries with the "extern_learn" flag (BR_FDB_ADDED_BY_EXT_LEARN) should still be notified to switchdev, since the spectrum driver listens to them (and this is kind of okay, because although they are treated identically to "static", they are expected to not age, and to roam). Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del") Link: https://lore.kernel.org/netdev/20230327115206.jk5q5l753aoelwus@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230418155902.898627-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-20ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBookAndy Chi
There is a HP ProBook 455 G10 which using ALC236 codec and need the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and micmute LED work. Signed-off-by: Andy Chi <andy.chi@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230420035942.66817-1-andy.chi@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-04-20Merge tag 'asoc-fix-v6.3-rc7' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.3 A few remaining small fixes for v6.3, all small driver specific ones.
2023-04-19x86: remove 'zerorest' argument from __copy_user_nocache()Linus Torvalds
Every caller passes in zero, meaning they don't want any partial copy to zero the remainder of the destination buffer. Which is just as well, because the implementation of that function didn't actually even look at that argument, and wasn't even aware it existed, although some misleading comments did mention it still. The 'zerorest' thing is a historical artifact of how "copy_from_user()" worked, in that it would zero the rest of the kernel buffer that it copied into. That zeroing still exists, but it's long since been moved to generic code, and the raw architecture-specific code doesn't do it. See _copy_from_user() in lib/usercopy.c for this all. However, while __copy_user_nocache() shares some history and superficial other similarities with copy_from_user(), it is in many ways also very different. In particular, while the code makes it *look* similar to the generic user copy functions that can copy both to and from user space, and take faults on both reads and writes as a result, __copy_user_nocache() does no such thing at all. __copy_user_nocache() always copies to kernel space, and will never take a page fault on the destination. What *can* happen, though, is that the non-temporal stores take a machine check because one of the use cases is for writing to stable memory, and any memory errors would then take synchronous faults. So __copy_user_nocache() does look a lot like copy_from_user(), but has faulting behavior that is more akin to our old copy_in_user() (which no longer exists, but copied from user space to user space and could fault on both source and destination). And it very much does not have the "zero the end of the destination buffer", since a problem with the destination buffer is very possibly the very source of the partial copy. So this whole thing was just a confusing historical artifact from having shared some code with a completely different function with completely different use cases. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-19Revert "net/mlx5: Enable management PF initialization"Jakub Kicinski
This reverts commit fe998a3c77b9f989a30a2a01fb00d3729a6d53a4. Paul reports that it causes a regression with IB on CX4 and FW 12.18.1000. In addition I think that the concept of "management PF" is not fully accepted and requires a discussion. Fixes: fe998a3c77b9 ("net/mlx5: Enable management PF initialization") Reported-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/all/CAHC9VhQ7A4+msL38WpbOMYjAqLp0EtOjeLh4Dc6SQtD6OUvCQg@mail.gmail.com/ Link: https://lore.kernel.org/r/20230413222547.56901-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== bpf 2023-04-19 We've added 3 non-merge commits during the last 6 day(s) which contain a total of 3 files changed, 34 insertions(+), 9 deletions(-). The main changes are: 1) Fix a crash on s390's bpf_arch_text_poke() under a NULL new_addr, from Ilya Leoshkevich. 2) Fix a bug in BPF verifier's precision tracker, from Daniel Borkmann and Andrii Nakryiko. 3) Fix a regression in veth's xdp_features which led to a broken BPF CI selftest, from Lorenzo Bianconi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix incorrect verifier pruning due to missing register precision taints veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL ==================== Link: https://lore.kernel.org/r/20230419195847.27060-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19MAINTAINERS: Resume MPTCP co-maintainer roleMat Martineau
I'm returning to the MPTCP maintainer role I held for most of the subsytem's history. This time I'm using my kernel.org email address. Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/mptcp/af85e467-8d0a-4eba-b5f8-e2f2c5d24984@tessares.net/ Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230418231318.115331-1-martineau@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19mailmap: add entries for Mat MartineauMatthieu Baerts
Map Mat's old corporate addresses to his kernel.org one. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230418-upstream-net-20230418-mailmap-mat-v1-1-13ca5dc83037@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-04-17 (i40e) This series contains updates to i40e only. Alex moves setting of active filters to occur under lock and checks/takes error path in rebuild if re-initializing the misc interrupt vector failed. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix i40e_setup_misc_vector() error handling i40e: fix accessing vsi->active_filters without holding lock ==================== Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205245.1030733-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19Merge tag 'mm-hotfixes-stable-2023-04-19-16-36' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "22 hotfixes. 19 are cc:stable and the remainder address issues which were introduced during this merge cycle, or aren't considered suitable for -stable backporting. 19 are for MM and the remainder are for other subsystems" * tag 'mm-hotfixes-stable-2023-04-19-16-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits) nilfs2: initialize unused bytes in segment summary blocks mm: page_alloc: skip regions with hugetlbfs pages when allocating 1G pages mm/mmap: regression fix for unmapped_area{_topdown} maple_tree: fix mas_empty_area() search maple_tree: make maple state reusable after mas_empty_area_rev() mm: kmsan: handle alloc failures in kmsan_ioremap_page_range() mm: kmsan: handle alloc failures in kmsan_vmap_pages_range_noflush() tools/Makefile: do missed s/vm/mm/ mm: fix memory leak on mm_init error handling mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock kernel/sys.c: fix and improve control flow in __sys_setres[ug]id() Revert "userfaultfd: don't fail on unrecognized features" writeback, cgroup: fix null-ptr-deref write in bdi_split_work_to_wbs maple_tree: fix a potential memory leak, OOB access, or other unpredictable bug tools/mm/page_owner_sort.c: fix TGID output when cull=tg is used mailmap: update jtoppins' entry to reference correct email mm/mempolicy: fix use-after-free of VMA iterator mm/huge_memory.c: warn with pr_warn_ratelimited instead of VM_WARN_ON_ONCE_FOLIO mm/mprotect: fix do_mprotect_pkey() return on error mm/khugepaged: check again on anon uffd-wp during isolation ...
2023-04-19e1000e: Disable TSO on i219-LM card to increase speedSebastian Basierski
While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround"). Fix that by disabling TSO during driver probe. Fixes: f29801030ac6 ("e1000e: Disable TSO for buffer overrun workaround") Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205345.1030801-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19bnxt_en: fix free-runnig PHC modeVadim Fedorenko
The patch in fixes changed the way real-time mode is chosen for PHC on the NIC. Apparently there is one more use case of the check outside of ptp part of the driver which was not converted to the new macro and is making a lot of noise in free-running mode. Fixes: 131db4991622 ("bnxt_en: reset PHC frequency in free-running mode") Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230418202511.1544735-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19Merge tag 'spi-fix-v6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fix from Mark Brown: "A small fix in the error handling for the rockchip driver, ensuring we don't leak clock enables if we fail to request the interrupt for the device" * tag 'spi-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-rockchip: Fix missing unwind goto in rockchip_sfc_probe()
2023-04-19Merge tag 'regulator-fix-v6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A few driver specific fixes, one build coverage issue and a couple of 'someone typed in the wrong number' style errors in describing devices to the subsystem" * tag 'regulator-fix-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: sm5703: Fix missing n_voltages for fixed regulators regulator: fan53555: Fix wrong TCS_SLEW_MASK regulator: fan53555: Explicitly include bits header
2023-04-19rpmsg: glink: Consolidate TX_DATA and TX_DATA_CONTBjorn Andersson
Rather than duplicating most of the code for constructing the initial TX_DATA and subsequent TX_DATA_CONT packets, roll them into a single loop. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230418163018.785524-3-quic_bjorande@quicinc.com
2023-04-19rpmsg: glink: Propagate TX failures in intentless mode as wellBjorn Andersson
As support for splitting transmission over several messages using TX_DATA_CONT was introduced it does not immediately return the return value of qcom_glink_tx(). The result is that in the intentless case (i.e. intent == NULL), the code will continue to send all additional chunks. This is wasteful, and it's possible that the send operation could incorrectly indicate success, if the last chunk fits in the TX fifo. Fix the condition. Fixes: 8956927faed3 ("rpmsg: glink: Add TX_DATA_CONT command while sending") Reviewed-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230418163018.785524-2-quic_bjorande@quicinc.com
2023-04-19rpmsg: glink: Wait for intent, not just request ackBjorn Andersson
In some implementations of the remote firmware, an intent request acknowledgment is sent when it's determined if the intent allocation will be fulfilled, but then the intent is queued after the acknowledgment. The result is that upon receiving a granted allocation request, the search for the newly allocated intent will fail and an additional request will be made. This will at best waste memory, but if the second request is rejected the transaction will be incorrectly rejected. Take the incoming intent into account in the wait to mitigate this problem. The above scenario can still happen, in the case that, on that same channel, an unrelated intent is delivered prior to the request acknowledgment and a separate process enters the send path and picks up the intent. Given that there's no relationship between the acknowledgment and the delivered (or to be delivered intent), there doesn't seem to be a solution to this problem. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Chris Lew <quic_clew@quicinc.com> [bjorn: Fixed spelling issues pointed out by checkpatch in commit message] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327144617.3134175-3-quic_bjorande@quicinc.com
2023-04-19rpmsg: glink: Transition intent request signaling to wait queueBjorn Andersson
Transition the intent request acknowledgement to use a wait queue so that it's possible, in the next commit, to extend the wait to also wait for an incoming intent. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230327144617.3134175-2-quic_bjorande@quicinc.com
2023-04-19Merge tag 'nand/for-6.4' into mtd/nextMiquel Raynal
Raw NAND core changes: * Convert to platform remove callback returning void * Fix spelling mistake waifunc() -> waitfunc() Raw NAND controller driver changes: * imx: Remove unused is_imx51_nfc and imx53_nfc functions * omap2: Drop obsolete dependency on COMPILE_TEST * orion: Use devm_platform_ioremap_resource() * qcom: - Use of_property_present() for testing DT property presence - Use devm_platform_get_and_ioremap_resource() * stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157 * tmio: Remove reference to config MTD_NAND_TMIO in the parsers Raw NAND manufacturer driver changes: * hynix: Fix up bit 0 of sdr_timing_mode SPI-NAND changes: * Add support for ESMT F50x1G41LB Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-04-19Merge tag 'spi-nor/for-6.4' into mtd/nextMiquel Raynal
SPI NOR core changes: * introduce Read While Write support for flashes featuring several banks * set the 4-Byte Address Mode method based on SFDP data * allow post_sfdp hook to return errors * parse SCCR MC table and introduce support for multi-chip devices SPI NOR manufacturer drivers changes: * macronix: add support for mx25uw51245g with RWW * spansion: - determine current address mode at runtime as it can be changed in a non-volatile way and differ from factory defaults or from what SFDP advertises. - enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T, s25hx and s28hx - add support for s25hl02gt and s25hs02gt Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-04-19net: dsa: microchip: ksz8795: Correctly handle huge frame configurationChristophe JAILLET
Because of the logic in place, SW_HUGE_PACKET can never be set. (If the first condition is true, then the 2nd one is also true, but is not executed) Change the logic and update each bit individually. Fixes: 29d1e85f45e0 ("net: dsa: microchip: ksz8: add MTU configuration support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/43107d9e8b5b8b05f0cbd4e1f47a2bb88c8747b2.1681755535.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-19rust: allow to use INIT_STACK_ALL_ZEROAndrea Righi
With CONFIG_INIT_STACK_ALL_ZERO enabled, bindgen passes -ftrivial-auto-var-init=zero to clang, that triggers the following error: error: '-ftrivial-auto-var-init=zero' hasn't been enabled; enable it at your own peril for benchmarking purpose only with '-enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang' However, this additional option that is currently required by clang is deprecated since clang-16 and going to be removed in the future, likely with clang-18. So, make sure bindgen is using this extra option if the major version of the libclang used by bindgen is < 16. In this way we can enable CONFIG_INIT_STACK_ALL_ZERO with CONFIG_RUST without triggering any build error. Link: https://github.com/llvm/llvm-project/issues/44842 Link: https://github.com/llvm/llvm-project/blob/llvmorg-16.0.0-rc2/clang/docs/ReleaseNotes.rst#deprecated-compiler-flags Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Kees Cook <keescook@chromium.org> [Changed to < 16, added link and reworded] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-04-19rust: fix regexp in scripts/is_rust_module.shAndrea Righi
nm can use "R" or "r" to show read-only data sections, but scripts/is_rust_module.sh can only recognize "r", so with some versions of binutils it can fail to detect if a module is a Rust module or not. Right now we're using this script only to determine if we need to skip BTF generation (that is disabled globally if CONFIG_RUST is enabled), but it's still nice to fix this script to do the proper job. Moreover, with this patch applied I can also relax the constraint of "RUST depends on !DEBUG_INFO_BTF" and build a kernel with Rust and BTF enabled at the same time (of course BTF generation is still skipped for Rust modules). [ Miguel: The actual reason is likely to be a change on the Rust compiler between 1.61.0 and 1.62.0: echo '#[used] static S: () = ();' | rustup run 1.61.0 rustc --emit=obj --crate-type=lib - && nm rust_out.o echo '#[used] static S: () = ();' | rustup run 1.62.0 rustc --emit=obj --crate-type=lib - && nm rust_out.o Gives: 0000000000000000 r _ZN8rust_out1S17h48027ce0da975467E 0000000000000000 R _ZN8rust_out1S17h58e1f3d9c0e97cefE See https://godbolt.org/z/KE6jneoo4. ] Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2023-04-19bpf: Fix incorrect verifier pruning due to missing register precision taintsDaniel Borkmann
Juan Jose et al reported an issue found via fuzzing where the verifier's pruning logic prematurely marks a program path as safe. Consider the following program: 0: (b7) r6 = 1024 1: (b7) r7 = 0 2: (b7) r8 = 0 3: (b7) r9 = -2147483648 4: (97) r6 %= 1025 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 7: (97) r6 %= 1 8: (b7) r9 = 0 9: (bd) if r6 <= r9 goto pc+1 10: (b7) r6 = 0 11: (b7) r0 = 0 12: (63) *(u32 *)(r10 -4) = r0 13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48) 15: (bf) r1 = r4 16: (bf) r2 = r10 17: (07) r2 += -4 18: (85) call bpf_map_lookup_elem#1 19: (55) if r0 != 0x0 goto pc+1 20: (95) exit 21: (77) r6 >>= 10 22: (27) r6 *= 8192 23: (bf) r1 = r0 24: (0f) r0 += r6 25: (79) r3 = *(u64 *)(r0 +0) 26: (7b) *(u64 *)(r1 +0) = r3 27: (95) exit The verifier treats this as safe, leading to oob read/write access due to an incorrect verifier conclusion: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0 last_idx 8 first_idx 0 regs=40 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe frame 0: propagating r6 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 from 6 to 9: safe verification time 110 usec stack depth 4 processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 The verifier considers this program as safe by mistakenly pruning unsafe code paths. In the above func#0, code lines 0-10 are of interest. In line 0-3 registers r6 to r9 are initialized with known scalar values. In line 4 the register r6 is reset to an unknown scalar given the verifier does not track modulo operations. Due to this, the verifier can also not determine precisely which branches in line 6 and 9 are taken, therefore it needs to explore them both. As can be seen, the verifier starts with exploring the false/fall-through paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic, r6 is correctly marked for precision tracking where backtracking kicks in where it walks back the current path all the way where r6 was set to 0 in the fall-through branch. Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also here, the state of the registers is the same, that is, r6=0 and r9=0, so that at line 19 the path can be pruned as it is considered safe. It is interesting to note that the conditional in line 9 turned r6 into a more precise state, that is, in the fall-through path at the beginning of line 10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed here) at the beginning of line 11, r6 turned into a known const r6=0 as r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must be 0 (**): [...] ; R6_w=scalar() 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 [...] from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 [...] The next path is 'from 6 to 9'. The verifier considers the old and current state equivalent, and therefore prunes the search incorrectly. Looking into the two states which are being compared by the pruning logic at line 9, the old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag correctly set in the old state, r9 did not. Both r6'es are considered as equivalent given the old one is a superset of the current, more precise one, however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9 did not have reg->precise flag set, the verifier does not consider the register as contributing to the precision state of r6, and therefore it considered both r9 states as equivalent. However, for this specific pruned path (which is also the actual path taken at runtime), register r6 will be 0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map. The purpose of precision tracking is to initially mark registers (including spilled ones) as imprecise to help verifier's pruning logic finding equivalent states it can then prune if they don't contribute to the program's safety aspects. For example, if registers are used for pointer arithmetic or to pass constant length to a helper, then the verifier sets reg->precise flag and backtracks the BPF program instruction sequence and chain of verifier states to ensure that the given register or stack slot including their dependencies are marked as precisely tracked scalar. This also includes any other registers and slots that contribute to a tracked state of given registers/stack slot. This backtracking relies on recorded jmp_history and is able to traverse entire chain of parent states. This process ends only when all the necessary registers/slots and their transitive dependencies are marked as precise. The backtrack_insn() is called from the current instruction up to the first instruction, and its purpose is to compute a bitmask of registers and stack slots that need precision tracking in the parent's verifier state. For example, if a current instruction is r6 = r7, then r6 needs precision after this instruction and r7 needs precision before this instruction, that is, in the parent state. Hence for the latter r7 is marked and r6 unmarked. For the class of jmp/jmp32 instructions, backtrack_insn() today only looks at call and exit instructions and for all other conditionals the masks remain as-is. However, in the given situation register r6 has a dependency on r9 (as described above in **), so also that one needs to be marked for precision tracking. In other words, if an imprecise register influences a precise one, then the imprecise register should also be marked precise. Meaning, in the parent state both dest and src register need to be tracked for precision and therefore the marking must be more conservative by setting reg->precise flag for both. The precision propagation needs to cover both for the conditional: if the src reg was marked but not the dst reg and vice versa. After the fix the program is correctly rejected: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0 last_idx 8 first_idx 0 regs=240 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 9: (bd) if r6 <= r9 goto pc+1 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 last_idx 9 first_idx 0 regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 11: R6=scalar(umax=18446744071562067968) R9=-2147483648 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff)) 22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192) 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 21 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? last_idx 19 first_idx 11 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 last_idx 9 first_idx 0 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 math between map_value pointer and register with unbounded min value is not allowed verification time 886 usec stack depth 4 processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2 Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Reported-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com> Reported-by: Meador Inge <meadori@google.com> Reported-by: Simon Scannell <simonscannell@google.com> Reported-by: Nenad Stojanovski <thenenadx@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Co-developed-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Juan Jose Lopez Jaimez <jjlopezjaimez@google.com> Reviewed-by: Meador Inge <meadori@google.com> Reviewed-by: Simon Scannell <simonscannell@google.com>
2023-04-19KVM: arm64: Fix buffer overflow in kvm_arm_set_fw_reg()Dan Carpenter
The KVM_REG_SIZE() comes from the ioctl and it can be a power of two between 0-32768 but if it is more than sizeof(long) this will corrupt memory. Fixes: 99adb567632b ("KVM: arm/arm64: Add save/restore support for firmware workaround state") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/4efbab8c-640f-43b2-8ac6-6d68e08280fe@kili.mountain Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-04-19Merge tag 'nfsd-6.3-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Address two issues with the new GSS krb5 Kunit tests * tag 'nfsd-6.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix failures of checksum Kunit tests sunrpc: Fix RFC6803 encryption test
2023-04-19drm/i915/dp_mst: Fix active port PLL selection for secondary MST streamsImre Deak
The port PLL selection needs to be up-to-date in the CRTC state of both the primary and all secondary MST streams. The commit removing the encoder update_prepare/complete hooks (see Fixes: below), stopped doing this for secondary streams, fix this up. Fixes: 0f752b2178c9 ("drm/i915: Remove the encoder update_prepare()/complete() hooks") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com (cherry picked from commit 27ac123b454417ea92d77c13a5d94655f53b759c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-04-19Merge tag 'loongarch-fixes-6.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some bug fixes, some build fixes, a comment fix and a trivial cleanup" * tag 'loongarch-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: tools/loongarch: Use __SIZEOF_LONG__ to define __BITS_PER_LONG LoongArch: Replace hard-coded values in comments with VALEN LoongArch: Clean up plat_swiotlb_setup() related code LoongArch: Check unwind_error() in arch_stack_walk() LoongArch: Adjust user_regset_copyin parameter to the correct offset LoongArch: Adjust user_watch_state for explicit alignment LoongArch: module: set section addresses to 0x0 LoongArch: Mark 3 symbol exports as non-GPL LoongArch: Enable PG when wakeup from suspend LoongArch: Fix _CONST64_(x) as unsigned LoongArch: Fix build error if CONFIG_SUSPEND is not set LoongArch: Fix probing of the CRC32 feature LoongArch: Make WriteCombine configurable for ioremap()
2023-04-19hwmon: (it87) Disable SMBus access for environmental controller registers.Frank Crawford
Add functions to disable and re-enable access by the SMBus for specific chips. Signed-off-by: Frank Crawford <frank@crawford.emu.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19docs: hwmon: Add documentaion for acbel-fsg032 PSULakshmi Yadlapati
Add documentation changes for acbel-fsg032 psu Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Link: https://lore.kernel.org/r/20230413132627.3444119-5-lakshmiy@us.ibm.com [groeck: Fixed alphabetic order in index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (pmbus/acbel-fsg032) Add Acbel power supplyLakshmi Yadlapati
Add the driver to support ACBEL FSG032 power supply. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Link: https://lore.kernel.org/r/20230413132627.3444119-4-lakshmiy@us.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19dt-bindings: trivial-devices: Add acbel,fsg032Lakshmi Yadlapati
Add new Acbel FSG032 power supply to trivial devices. Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230413132627.3444119-3-lakshmiy@us.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19dt-bindings: vendor-prefixes: Add prefix for acbelLakshmi Yadlapati
Add a vendor prefix entry for acbel (https://www.acbel.com) Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230413132627.3444119-2-lakshmiy@us.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (sfctemp) Simplify error messageChristophe JAILLET
dev_err_probe() already display the error code. There is no need to duplicate it explicitly in the error message. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f32a6e877f399e11ca130476002f85c2b48ba7ec.1681575790.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (pmbus/ibm-cffps) Use default debugfs attributes and lock functionEddie James
Switch the driver to use the default debugfs attributes instead of ones that provide the same data under different names. Use the lock functions for the debugfs and led attributes, and simplify the input history operation by dropping the timer and lock. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230412161526.252294-3-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (pmbus/core) Add lock and unlock functionsEddie James
Debugfs operations may set the page number, which must be done atomically with the subsequent i2c operation. Lock the update_lock in the debugfs functions and provide a function for pmbus drivers to lock and unlock the update_lock. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20230412161526.252294-2-eajames@linux.ibm.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (pmbus/core) Request threaded interrupt with IRQF_ONESHOTGuenter Roeck
0-day rightfully complains: drivers/hwmon/pmbus/pmbus_core.c:3164:7-32: WARNING: Threaded IRQ with no primary handler requested without IRQF_ONESHOT (unless it is nested IRQ) Without IRQF_ONESHOT, the primary interrupt may end up in a loop, and the threaded interrupt handler may never execute. Request interrupt with IRQF_ONESHOT and assume that the interrupt will cleared and re-enabled by clearing the fault condition in the threaded interrupt handler. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-hwmon/6436efbb.08+e+yEDqvRxvHDP%25lkp@intel.com/T/#u Cc: Patrick Rudolph <patrick.rudolph@9elements.com> Cc: Naresh Solanki <Naresh.Solanki@9elements.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (nct6775) update ASUS WMI monitoring list A620/B760/W790Denis Pauk
Boards such as * B360M-BASALT, * B360M-D3H, * EX-B360M-V, * EX-B360M-V3, * EX-B360M-V5, * EX-B760M-V5 D4, * PRIME A620M-A, * PRIME B460I-PLUS, * PRIME B460M-A, * PRIME B460M-K, * PRIME B550-PLUS AC-HES, * PRIME B660M-A AC D4, * PRIME B760M-A, * PRIME B760M-A AX D4, * PRIME B760M-A D4, * PRIME B760M-AJ D4, * PRIME B760M-A WIFI, * PRIME B760M-A WIFI D4, * PRIME B760M-K D4, * PRIME B760-PLUS, * PRIME B760-PLUS D4, * PRIME H310I-PLUS, * PRIME H310M-A, * PRIME H310M-C, * PRIME H310M-D, * PRIME H310M-DASH, * PRIME H310M-E, * PRIME H310M-E/BR, * PRIME H310M-F, * PRIME H310M-K, * PRIME H310-PLUS, * PRIME H310T, * PRIME H370-A, * PRIME H370M-PLUS, * PRIME H370-PLUS, * PRIME H410I-PLUS, * PRIME H470M-PLUS, * PRIME H470-PLUS, * PRIME H510M-R, * PRIME H510T2/CSM, * PRIME H570M-PLUS, * PRIME H570-PLUS, * PRIME H610M-R D4, * PRIME H670-PLUS D4, * PRIME H770-PLUS D4, * PRIME Q370M-C, * ProArt B760-CREATOR D4, * Pro B760M-C, * Pro B760M-CT, * PRO Q470M-C, * Pro Q670M-C, * Pro WS W790-ACE, * Pro WS W790E-SAGE SE, * ROG MAXIMUS Z690 FORMULA, * ROG MAXIMUS Z690 HERO, * ROG STRIX B360-F GAMING, * ROG STRIX B360-G GAMING, * ROG STRIX B360-H GAMING, * ROG STRIX B360-H GAMING/OPTANE, * ROG STRIX B360-I GAMING, * ROG STRIX B760-A GAMING WIFI, * ROG STRIX B760-A GAMING WIFI D4, * ROG STRIX B760-F GAMING WIFI, * ROG STRIX B760-G GAMING WIFI, * ROG STRIX B760-G GAMING WIFI D4, * ROG STRIX B760-I GAMING WIFI, * ROG STRIX H370-F GAMING, * ROG STRIX H370-I GAMING, * ROG STRIX H470-I GAMING, * ROG STRIX Z690-E GAMING WIFI, * ROG STRIX Z690-F GAMING WIFI, * ROG STRIX Z690-G GAMING WIFI, * TUF B360M-E GAMING, * TUF B360M-PLUS GAMING, * TUF B360M-PLUS GAMING/BR, * TUF B360M-PLUS GAMING S, * TUF B360-PLUS GAMING, * TUF B360-PRO GAMING, * TUF B360-PRO GAMING (WI-FI), * TUF GAMING A620M-PLUS, * TUF GAMING A620M-PLUS WIFI, * TUF GAMING B660M-PLUS D4, * TUF GAMING B660M-PLUS WIFI D4, * TUF GAMING B760M-BTF WIFI D4, * TUF GAMING B760M-E D4, * TUF GAMING B760M-PLUS, * TUF GAMING B760M-PLUS D4, * TUF GAMING B760M-PLUS WIFI, * TUF GAMING B760M-PLUS WIFI D4, * TUF GAMING B760-PLUS WIFI, * TUF GAMING B760-PLUS WIFI D4, * TUF GAMING H470-PRO, * TUF GAMING H470-PRO (WI-FI), * TUF GAMING H570-PRO, * TUF GAMING H570-PRO WIFI, * TUF GAMING H670-PRO WIFI D4, * TUF GAMING H770-PRO WIFI, * TUF GAMING X570-PRO WIFI II, * TUF H310M-PLUS GAMING, * TUF H310M-PLUS GAMING/BR, * TUF H310-PLUS GAMING, * TUF H370-PRO GAMING, * TUF H370-PRO GAMING (WI-FI), have got a nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds such boards to the WMI monitoring list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk <pauk.denis@gmail.com> Link: https://lore.kernel.org/r/20230408162228.4291-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: ina2xx: add optional regulator supportSvyatoslav Ryhel
TI ina2xx sensors according to datasheets have dedicated vs supplies. Add it for proper work. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Link: https://lore.kernel.org/r/20230407160508.20479-3-clamor95@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19dt-bindings: hwmon: ina2xx: add supply propertySvyatoslav Ryhel
Add vs-supply property. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230407160508.20479-2-clamor95@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19dt-bindings: hwmon: pwm-fan: Convert to DT schemaCristian Ciocaltea
Convert the PWM fan bindings to DT schema format. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230406182000.956275-2-cristian.ciocaltea@collabora.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (pmbus/core) Notify regulator eventsNaresh Solanki
Notify regulator events in PMBus irq handler. Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230328150335.90238-3-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (pmbus/core) Add regulator event supportPatrick Rudolph
Add regulator events corresponding to regulator error in regulator flag map. Also capture the same in pmbus_regulator_get_flags. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230328150335.90238-2-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (pmbus/core) Add rdev in pmbus_data structNaresh Solanki
Add regulator device in pmbus_data & initialize the same during PMBus regulator register. Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Link: https://lore.kernel.org/r/20230328150335.90238-1-Naresh.Solanki@9elements.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (sfctemp) Add StarFive JH71x0 temperature sensorEmil Renner Berthing
Add driver for the StarFive JH71x0 temperature sensor. You can enable/disable it and read temperature in milli Celcius through sysfs. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Co-developed-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Link: https://lore.kernel.org/r/20230321022644.107027-3-hal.feng@starfivetech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19dt-bindings: hwmon: Add starfive,jh71x0-tempEmil Renner Berthing
Add bindings for the temperature sensor on the StarFive JH7100 and JH7110 SoCs. Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230321022644.107027-2-hal.feng@starfivetech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (coretemp) Delete an obsolete commentZhang Rui
The refinement of tjmax value retrieved from MSR_IA32_TEMPERATURE_TARGET has been changed for several times. Now, the raw value from MSR is used without refinement. Thus remove the obsolete comment. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20230330103346.6044-2-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (coretemp) Delete tjmax debug messageZhang Rui
After commit c0c67f8761ce ("hwmon: (coretemp) Add support for dynamic tjmax"), tjmax value is retrieved from MSR every time the temperature is read. This means that, with debug message enabled, the tjmax debug message is printed out for every single temperature read for any CPU. This spams the syslog. Ideally, as tjmax is package scope unique, the debug message should show once when tjmax is changed for one package. But this requires inventing some new per-package data in the coretemp driver, and this is overkill. To keep the code simple, delete the tjmax debug message. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20230330103346.6044-1-rui.zhang@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (asus-ec-sensors) add ROG STRIX Z390-F GAMINGEugene Shalygin
The definition comes from a LHM PR [1], and the mutex path from the ACPI dump, kindly provided by the PR author [2] [1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/1031 [2] https://github.com/zeule/asus-ec-sensors/issues/36 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20230405224339.358675-3-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-19hwmon: (asus-ec-sensors) add ProArt B550-Creatorfireflame90051
Add support for the ASUS ProArt B550-Creator board, was tested with the hardware [1]. [1] https://github.com/zeule/asus-ec-sensors/issues/35 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Signed-off-by: fireflame90051 <cacoukoulis@gmail.com> Link: https://lore.kernel.org/r/20230405224339.358675-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 23:57:37 +0000