| Age | Commit message (Collapse) | Author |
|---|
|
LKP considered variable 'ret' in vhost_vdpa_setup_vq_irq() as
a unused variable, so suggest we remove it. Actually it stores
return value of irq_bypass_register_producer(), but we did not
check it, we should handle the failure case.
This commit will print a message if irq bypass register producer
fail, in this case, vqs still remain functional.
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20201023104046.404794-1-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Since commit f959dcd6ddfd
("dma-direct: Fix potential NULL pointer dereference")
an error is reported when we load vdpa_sim and virtio-vdpa:
[ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12
It seems that dma_mask is not initialized.
This patch initializes dma_mask() and calls dma_set_mask_and_coherent()
to fix the problem.
Full log:
[ 128.548628] ------------[ cut here ]------------
[ 128.553268] WARNING: CPU: 23 PID: 1105 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x14c/0x1d0
[ 128.562139] Modules linked in: virtio_net net_failover failover virtio_vdpa vdpa_sim vringh vhost_iotlb vdpa xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi rfkill intel_rapl_msr intel_rapl_common isst_if_common sunrpc skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit irqbypass drm_kms_helper crct10dif_pclmul crc32_pclmul syscopyarea ghash_clmulni_intel iTCO_wdt sysfillrect iTCO_vendor_support sysimgblt rapl fb_sys_fops dcdbas intel_cstate drm acpi_ipmi ipmi_si mei_me dell_smbios intel_uncore ipmi_devintf mei i2c_i801 dell_wmi_descriptor wmi_bmof pcspkr lpc_ich i2c_smbus ipmi_msghandler acpi_power_meter ip_tables xfs libcrc32c sd_mod t10_pi sg ahci libahci libata megaraid_sas tg3 crc32c_intel wmi dm_mirror dm_region_hash dm_log
[ 128.562188] dm_mod
[ 128.651334] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59
[ 128.659939] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020
[ 128.667419] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0
[ 128.672384] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa
[ 128.691131] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246
[ 128.696357] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000
[ 128.703488] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000
[ 128.710620] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
[ 128.717754] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8
[ 128.724886] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940
[ 128.732020] FS: 00007f887bae23c0(0000) GS:ffff9e4ac01c0000(0000) knlGS:0000000000000000
[ 128.740105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 128.745852] CR2: 0000562bc09de998 CR3: 00000003c156c006 CR4: 00000000007706e0
[ 128.752982] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 128.760114] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 128.767247] PKRU: 55555554
[ 128.769961] Call Trace:
[ 128.772418] virtqueue_add+0x81e/0xb00
[ 128.776176] virtqueue_add_inbuf_ctx+0x26/0x30
[ 128.780625] try_fill_recv+0x3a2/0x6e0 [virtio_net]
[ 128.785509] virtnet_open+0xf9/0x180 [virtio_net]
[ 128.790217] __dev_open+0xe8/0x180
[ 128.793620] __dev_change_flags+0x1a7/0x210
[ 128.797808] dev_change_flags+0x21/0x60
[ 128.801646] do_setlink+0x328/0x10e0
[ 128.805227] ? __nla_validate_parse+0x121/0x180
[ 128.809757] ? __nla_parse+0x21/0x30
[ 128.813338] ? inet6_validate_link_af+0x5c/0xf0
[ 128.817871] ? cpumask_next+0x17/0x20
[ 128.821535] ? __snmp6_fill_stats64.isra.54+0x6b/0x110
[ 128.826676] ? __nla_validate_parse+0x47/0x180
[ 128.831120] __rtnl_newlink+0x541/0x8e0
[ 128.834962] ? __nla_reserve+0x38/0x50
[ 128.838713] ? security_sock_rcv_skb+0x2a/0x40
[ 128.843158] ? netlink_deliver_tap+0x2c/0x1e0
[ 128.847518] ? netlink_attachskb+0x1d8/0x220
[ 128.851793] ? skb_queue_tail+0x1b/0x50
[ 128.855641] ? fib6_clean_node+0x43/0x170
[ 128.859652] ? _cond_resched+0x15/0x30
[ 128.863406] ? kmem_cache_alloc_trace+0x3a3/0x420
[ 128.868110] rtnl_newlink+0x43/0x60
[ 128.871602] rtnetlink_rcv_msg+0x12c/0x380
[ 128.875701] ? rtnl_calcit.isra.39+0x110/0x110
[ 128.880147] netlink_rcv_skb+0x50/0x100
[ 128.883987] netlink_unicast+0x1a5/0x280
[ 128.887913] netlink_sendmsg+0x23d/0x470
[ 128.891839] sock_sendmsg+0x5b/0x60
[ 128.895331] ____sys_sendmsg+0x1ef/0x260
[ 128.899255] ? copy_msghdr_from_user+0x5c/0x90
[ 128.903702] ___sys_sendmsg+0x7c/0xc0
[ 128.907369] ? dev_forward_change+0x130/0x130
[ 128.911731] ? sysctl_head_finish.part.29+0x24/0x40
[ 128.916616] ? new_sync_write+0x11f/0x1b0
[ 128.920628] ? mntput_no_expire+0x47/0x240
[ 128.924727] __sys_sendmsg+0x57/0xa0
[ 128.928309] do_syscall_64+0x33/0x40
[ 128.931887] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 128.936937] RIP: 0033:0x7f88792e3857
[ 128.940518] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
[ 128.959263] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 128.966827] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857
[ 128.973960] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c
[ 128.981095] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000
[ 128.988224] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000
[ 128.995357] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c
[ 129.002492] CPU: 23 PID: 1105 Comm: NetworkManager Tainted: G S I 5.10.0-rc1+ #59
[ 129.011093] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.8.1 06/30/2020
[ 129.018571] Call Trace:
[ 129.021027] dump_stack+0x57/0x6a
[ 129.024346] __warn.cold.14+0xe/0x3d
[ 129.027925] ? dma_map_page_attrs+0x14c/0x1d0
[ 129.032283] report_bug+0xbd/0xf0
[ 129.035602] handle_bug+0x44/0x80
[ 129.038922] exc_invalid_op+0x13/0x60
[ 129.042589] asm_exc_invalid_op+0x12/0x20
[ 129.046602] RIP: 0010:dma_map_page_attrs+0x14c/0x1d0
[ 129.051566] Code: 1c 25 28 00 00 00 0f 85 97 00 00 00 48 83 c4 10 5b 5d 41 5c 41 5d c3 4c 89 da eb d7 48 89 f2 48 2b 50 18 48 89 d0 eb 8d 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb c3 48 89 d9 48 8b 40 40 e8 2d a0 aa
[ 129.070311] RSP: 0018:ffffae0f0151f3c8 EFLAGS: 00010246
[ 129.075536] RAX: ffffffffc06b7400 RBX: 00000000000005fa RCX: 0000000000000000
[ 129.082669] RDX: 0000000000000040 RSI: ffffcee3c7861200 RDI: ffff9e2bc16cd000
[ 129.089803] RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000
[ 129.096936] R10: 0000000000000002 R11: 0000000000000000 R12: ffff9e472cb291f8
[ 129.104068] R13: ffff9e2bc14da780 R14: ffff9e472bc20000 R15: ffff9e2bc1b14940
[ 129.111200] virtqueue_add+0x81e/0xb00
[ 129.114952] virtqueue_add_inbuf_ctx+0x26/0x30
[ 129.119399] try_fill_recv+0x3a2/0x6e0 [virtio_net]
[ 129.124280] virtnet_open+0xf9/0x180 [virtio_net]
[ 129.128984] __dev_open+0xe8/0x180
[ 129.132390] __dev_change_flags+0x1a7/0x210
[ 129.136575] dev_change_flags+0x21/0x60
[ 129.140415] do_setlink+0x328/0x10e0
[ 129.143994] ? __nla_validate_parse+0x121/0x180
[ 129.148528] ? __nla_parse+0x21/0x30
[ 129.152107] ? inet6_validate_link_af+0x5c/0xf0
[ 129.156639] ? cpumask_next+0x17/0x20
[ 129.160306] ? __snmp6_fill_stats64.isra.54+0x6b/0x110
[ 129.165443] ? __nla_validate_parse+0x47/0x180
[ 129.169890] __rtnl_newlink+0x541/0x8e0
[ 129.173731] ? __nla_reserve+0x38/0x50
[ 129.177483] ? security_sock_rcv_skb+0x2a/0x40
[ 129.181928] ? netlink_deliver_tap+0x2c/0x1e0
[ 129.186286] ? netlink_attachskb+0x1d8/0x220
[ 129.190560] ? skb_queue_tail+0x1b/0x50
[ 129.194401] ? fib6_clean_node+0x43/0x170
[ 129.198411] ? _cond_resched+0x15/0x30
[ 129.202163] ? kmem_cache_alloc_trace+0x3a3/0x420
[ 129.206869] rtnl_newlink+0x43/0x60
[ 129.210361] rtnetlink_rcv_msg+0x12c/0x380
[ 129.214462] ? rtnl_calcit.isra.39+0x110/0x110
[ 129.218908] netlink_rcv_skb+0x50/0x100
[ 129.222747] netlink_unicast+0x1a5/0x280
[ 129.226672] netlink_sendmsg+0x23d/0x470
[ 129.230599] sock_sendmsg+0x5b/0x60
[ 129.234090] ____sys_sendmsg+0x1ef/0x260
[ 129.238015] ? copy_msghdr_from_user+0x5c/0x90
[ 129.242461] ___sys_sendmsg+0x7c/0xc0
[ 129.246128] ? dev_forward_change+0x130/0x130
[ 129.250487] ? sysctl_head_finish.part.29+0x24/0x40
[ 129.255368] ? new_sync_write+0x11f/0x1b0
[ 129.259381] ? mntput_no_expire+0x47/0x240
[ 129.263478] __sys_sendmsg+0x57/0xa0
[ 129.267058] do_syscall_64+0x33/0x40
[ 129.270639] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 129.275689] RIP: 0033:0x7f88792e3857
[ 129.279268] Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48
[ 129.298015] RSP: 002b:00007ffdca60dea0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
[ 129.305581] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f88792e3857
[ 129.312712] RDX: 0000000000000000 RSI: 00007ffdca60def0 RDI: 000000000000000c
[ 129.319846] RBP: 00007ffdca60def0 R08: 0000000000000000 R09: 0000000000000000
[ 129.326978] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000000
[ 129.334109] R13: 0000000000000000 R14: 00007ffdca60e0a8 R15: 00007ffdca60e09c
[ 129.341249] ---[ end trace c551e8028fbaf59d ]---
[ 129.351207] net eth0: Unexpected TXQ (0) queue failure: -12
[ 129.360445] net eth0: Unexpected TXQ (0) queue failure: -12
[ 129.824428] net eth0: Unexpected TXQ (0) queue failure: -12
Fixes: 2c53d0f64c06 ("vdpasim: vDPA device simulator")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20201027175914.689278-1-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This reverts commit 7ed9e3d97c32d969caded2dfb6e67c1a2cc5a0b1.
The patch creates a DoS risk since it can result in a high order memory
allocation.
Fixes: 7ed9e3d97c32d ("vhost-vdpa: fix page pinning leakage in error path")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix to return the variable "err" from the error handling case instead
of "ret".
Fixes: 94abbccdf291 ("vdpa/mlx5: Add shared memory registration code")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20201026070637.164321-1-jingxiangfeng@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The copy_to/from_user() functions return the number of bytes which we
weren't able to copy but the ioctl should return -EFAULT if they fail.
Fixes: a127c5bbb6a8 ("vhost-vdpa: fix backend feature ioctls")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201023120853.GI282278@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
No one checks the return value of debugfs_create_devm_seqfile(), as it's
not needed, so make the return value void, so that no one tries to do so
in the future.
Link: https://lore.kernel.org/r/20201023131037.2500765-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Leads to improper dpm on older parts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1353
Fixes: 8d89b96fe797 ("drm/amd/powerplay: optimize the mclk dpm policy settings")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
commit e098bc9612c2 ("drm/amd/pm: optimize the power related source code layout")
moved the directory, update the F: file pattern to match.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit f87812284172a9809820d10143b573d833cd3f75 ("drm/amdgpu:
Fix bug where DPM is not enabled after hibernate and resume").
It was intended to fix Hawaii S4(hibernation) issue but break S3. As
ixFEATURE_STATUS is filled with garbage data on resume which can be
only cleared by reloading smc firmware(but that will involve many
changes). So, we will revert this S4 fix and seek a new way.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So that the succeeding resume can be performed based on
a clean state.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Which can be used for S4(hibernation) support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct some registers bitmasks and add mmBIOS_SCRATCH_7
reset.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This can address the random SDMA hang after pci config reset
seen on Hawaii.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
for headless NAVI ASICs
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Navi14 0x7340/C9 SKU has no display and video support, remove them.
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Remove dup mmio handler for BXT/APL. Otherwise mmio handler will fail
to init.
- Add engine GPR with F_CMD_ACCESS since BXT/APL will load them via
LRI. Otherwise, guest will enter failsafe mode.
V2:
Use RCS/BCS GPR macros instead of offset.
Revise commit message.
V3:
Use GEN8_RING_CS_GPR macros on ring base.
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201016052913.209248-1-colin.xu@intel.com
|
|
Backmerge for 5.10-rc1 to apply one extra APL fix.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
One issue exposed after below commit with which the system will freeze
at suspend after vGPU is created (no need to activate the vGPU).
commit e6ba76480299 ("drm/i915: Remove i915->kernel_context")
Old implementation pin the intel_context at setup_submission and
unpin it at clean_submission. So after some vGPU is created, the
intel_context is always pinned there although no workload using it.
It will then block i915 enter suspend state.
There is no need to pin it all the time. Pin/unpin it around workload
lifecycle is more reasonable. After GVT enabled suspend/resume, the
pinned intel_context will also get unpined when userspace put VM process
into suspend state since all workloads are retired, then it's safe to
unpin all intel_context for workloads created. So move the pin/unpin to
create_workload and destroy_workload, while still keep the
create/destroy in old place.
V2:
Rebase.
Fixes: e6ba76480299 ("drm/i915: Remove i915->kernel_context")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201016054059.238371-1-colin.xu@intel.com
|
|
When the system goes to suspend, if the controller is at device mode with
cable connecting to host, the call stack is: cdns3_suspend->
cdns3_gadget_suspend -> cdns3_disconnect_gadget, after cdns3_disconnect_gadget
is called, it owns lock wrongly, it causes the system being deadlock after
resume due to at cdns3_device_thread_irq_handler, it tries to get the lock,
but can't get it forever.
To fix it, we delete the unlock-lock operations at cdns3_disconnect_gadget,
and do it at the caller.
Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support")
Acked-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts
register. The issue occurred because EP_CFG register was set twice
before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING
causes that controller increases internal counter holding the number
of reserved on-chip buffers. First time this register was updated in
function cdns3_ep_config before delegating SET_CONFIGURATION request
to class driver and again it was updated when class wanted to enable
endpoint. This patch fixes this issue by configuring endpoints
enabled by class driver in cdns3_gadget_ep_enable and others just
before status stage.
Cc: stable@vger.kernel.org#v5.8+
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Reported-and-tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
When hpsa_scsi_add_host() fails, h->lastlogicals is leaked since it is
missing a free() in the error handler.
Fix this by adding free() when hpsa_scsi_add_host() fails.
Link: https://lore.kernel.org/r/20201027073125.14229-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix max memory region size calculation (Matt)
- Restore ILK-M RPS support, restoring performance (Ville)
- Reject 90/270 degreerotated initial fbs (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030004442.GA146813@intel.com
|
|
Fixes an endian regression on older GPUs, a refcount overflow,
a migration fix and 3 display fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv6MOjtgzKchpis1XrZYmu7-6CaxnHVzJKOXPH62_em7tw@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
First round of drm-misc-fixes with a couple of leftovers from
drm-misc-fixes next.
Some reset fixes for the mantix panel, some fixes for a scaler issue on
sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio
related)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029173414.fxrl5jacsdwqheto@gilmour.lan
|
|
While I thought I had this correct (since it actually did reject modes
like I expected during testing), Ville Syrjala from Intel pointed out
that the logic here isn't correct. max_clock refers to the max data rate
supported by the DP encoder. So, limiting it to the output of ds_clock (which
refers to the maximum dotclock of the downstream DP device) doesn't make any
sense. Additionally, since we're using the connector's bpc as the canonical BPC
we should use this in mode_valid until we support dynamically setting the bpp
based on bandwidth constraints.
https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
For more info.
So, let's rewrite this using Ville's advice.
v2:
* Ville pointed out I mixed up the dotclock and the link rate. So fix that...
* ...and also rename all the variables in this function to be more appropriately
labeled so I stop mixing them up.
* Reuse the bpp from the connector for now until we have dynamic bpp selection.
* Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we
should also have been doing from the start
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Ville also pointed out that I got a lot of the logic here wrong as well, whoops.
While I don't think anyone's likely using 3D output with nouveau, the next patch
will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get
rid of it and open-code it like before, while taking care to move the 3D frame
packing calculations on the dot clock into the right place.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d6a9efece724 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
With this we try to detect if the endianess switch works and assume LE if
not. Suggested by Ben.
Fixes: 51c05340e407 ("drm/nouveau/device: detect if changing endianness failed")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
we can't use nouveau_bo_ref here as no ttm object was allocated and
nouveau_bo_ref mainly deals with that. Simply deallocate the object.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Not entirely sure why this never came up when I originally tested this
(maybe some BIOSes already have this setup?) but the ->caps_init vfunc
appears to cause the display engine to throw an exception on driver
init, at least on my ThinkPad P72:
nouveau 0000:01:00.0: disp: chid 0 mthd 008c data 00000000 0000508c 0000102b
This is magic nvidia speak for "You need to have the DMA notifier offset
programmed before you can call NV507D_GET_CAPABILITIES." So, let's fix
this by doing that, and also perform an update afterwards to prevent
racing with the GPU when reading capabilities.
v2:
* Don't just program the DMA notifier offset, make sure to actually
perform an update
v3:
* Don't call UPDATE()
* Actually read the correct notifier fields, as apparently the
CAPABILITIES_DONE field lives in a different location than the main
NV_DISP_CORE_NOTIFIER_1 field. As well, 907d+ use a different
CAPABILITIES_DONE field then pre-907d cards.
v4:
* Don't forget to check the return value of core507d_read_caps()
v5:
* Get rid of NV50_DISP_CAPS_NTFY[14], use NV50_DISP_CORE_NTFY
* Disable notifier after calling GetCapabilities()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 4a2cb4181b07 ("drm/nouveau/kms/nv50-: Probe SOR and PIOR caps for DP interlacing support")
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The user level OpenCL code shouldn't have to align start and end
addresses to a page boundary. That is better handled in the nouveau
driver. The npages field is also redundant since it can be computed
from the start and end addresses.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.10-2020-10-29:
amdgpu:
- Add new navi1x PCI ID
- GPUVM reserved area fixes
- Misc display fixes
- Fix bad interactions between display code and CONFIG_KGDB
- Fixes for SMU manual fan control and i2c
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029061549.4133-1-alexander.deucher@amd.com
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Before this patch, gfs2_fitrim was not properly checking for a "live" file
system. If the file system had something to trim and the file system
was read-only (or spectator) it would start the trim, but when it starts
the transaction, gfs2_trans_begin returns -EROFS (read-only file system)
and it errors out. However, if the file system was already trimmed so
there's no work to do, it never called gfs2_trans_begin. That code is
bypassed so it never returns the error. Instead, it returns a good
return code with 0 work. All this makes for inconsistent behavior:
The same fstrim command can return -EROFS in one case and 0 in another.
This tripped up xfstests generic/537 which reports the error as:
+fstrim with unrecovered metadata just ate your filesystem
This patch adds a check for a "live" (iow, active journal, iow, RW)
file system, and if not, returns the error properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before commit 97fd734ba17e, the local statfs_changeX inode was never
initialized for spectator mounts. However, it still checks for
spectator mounts when unmounting everything. There's no good reason to
lookup the statfs_changeX files because spectators cannot perform recovery.
It still, however, needs the master statfs file for statfs calls.
This patch adds the check for spectator mounts to init_statfs.
Fixes: 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, function gfs2_meta_sync called filemap_fdatawrite to write
the address space for the metadata being synced. That's great for inodes, but
resource groups all point to the same superblock-address space, sdp->sd_aspace.
Each rgrp has its own range of blocks on which it should operate. That meant
every time an rgrp's metadata was synced, it would write all of them instead
of just the range.
This patch eliminates function gfs2_meta_sync and tailors specific metasync
functions for inodes and rgrps.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Hi,
Before this patch, function init_journal's "undo" directive jumped to label
fail_jinode_gh. But now that it does statfs initialization, it needs to
jump to fail_statfs instead. Failure to do so means that mount failures
after init_journal is successful will neglect to let go of the proper
statfs information, stranding the statfs_changeX inodes. This makes it
impossible to free its glocks, and results in:
gfs2: fsid=sda.s: G: s:EX n:2/805f f:Dqob t:EX d:UN/603701000 a:0 v:0 r:4 m:200 p:1
gfs2: fsid=sda.s: H: s:EX f:H e:0 p:1397947 [(ended)] init_journal+0x548/0x890 [gfs2]
gfs2: fsid=sda.s: I: n:6/32863 t:8 f:0x00 d:0x00000201 s:24 p:0
gfs2: fsid=sda.s: G: s:SH n:5/805f f:Dqob t:SH d:UN/603712000 a:0 v:0 r:3 m:200 p:0
gfs2: fsid=sda.s: H: s:SH f:EH e:0 p:1397947 [(ended)] gfs2_inode_lookup+0x1fb/0x410 [gfs2]
VFS: Busy inodes after unmount of sda. Self-destruct in 5 seconds. Have a nice day...
The next time the file system is mounted, it then reuses the same glocks,
which ends in a kernel NULL pointer dereference when trying to dump the
reused glock.
This patch makes the "undo" function of init_journal jump to fail_statfs
so the statfs files are properly deconstructed upon failure.
Fixes: 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Gfs2 creates an address space for its rgrps called sd_aspace, but it never
called truncate_inode_pages_final on it. This confused vfs greatly which
tried to reference the address space after gfs2 had freed the superblock
that contained it.
This patch adds a call to truncate_inode_pages_final for sd_aspace, thus
avoiding the use-after-free.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Function gfs2_clear_rgrpd calls kfree(rgd->rd_bits) before calling
return_all_reservations, but return_all_reservations still dereferences
rgd->rd_bits in __rs_deltree. Fix that by moving the call to kfree below the
call to return_all_reservations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
K2G devices still only use single parameter for power-domains property,
so check for this properly in the driver. Without this, every peripheral
fails to probe resulting in boot failure.
Link: https://lore.kernel.org/r/20201029093337.21170-1-t-kristo@ti.com
Fixes: efa5c01cd7ee ("soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
VFIO allows a device driver to resolve a fault by mapping a MMIO
range. This can be subsequently result in user_mem_abort() to
try and compute a huge mapping based on the MMIO pfn, which is
a sure recipe for things to go wrong.
Instead, force a PTE mapping when the pfn faulted in has a device
mapping.
Fixes: 6d674e28f642 ("KVM: arm/arm64: Properly handle faulting of device mappings")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Santosh Shukla <sashukla@nvidia.com>
[maz: rewritten commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1603711447-11998-2-git-send-email-sashukla@nvidia.com
|
