summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-13nvmet: fix Identify Active Namespace ID list handlingDamien Le Moal
The identify command with cns set to NVME_ID_CNS_NS_ACTIVE_LIST does not depend on the command set. The execution of this command should thus not look at the csi field specified in the command. Simplify nvmet_execute_identify() to directly call nvmet_execute_identify_nslist() without the csi switch-case. Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-13nvmet: fix Identify Controller handlingDamien Le Moal
The identify command with cns set to NVME_ID_CNS_CTRL does not depend on the command set. The execution of this command should thus not look at the csi specified in the command. Simplify nvmet_execute_identify() to directly call nvmet_execute_identify_ctrl() without the csi switch-case. Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-13nvmet: fix Identify Namespace handlingDamien Le Moal
The identify command with cns set to NVME_ID_CNS_NS does not directly depend on the command set. The NVMe specifications is rather confusing here as it appears that this command only applies to the NVM command set. However, footnote 8 of Figure 273 in the NVMe 2.0 base specifications clearly state that this command applies to NVM command sets that support logical blocks, that is, NVM and ZNS. Both the NVM and ZNS command set specifications also list this identify as mandatory. The command handling should thus not look at the csi field since it is defined as unused for this command. Given that we do not support the KV command set, simply remove the csi switch-case for that command handling and call directly nvmet_execute_identify_ns() in nvmet_execute_identify(). Fixes: ab5d0b38c047 ("nvmet: add Command Set Identifier support") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-13nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns()Damien Le Moal
Nvme specifications state that: If the I/O Command Set associated with the namespace identified by the NSID field does not support the Identify Namespace data structure specified by the CSI field, the controller shall abort the command with a status code of Invalid Field in Command. In other words, if nvmet_execute_identify_cns_cs_ns() is called for a target with a block device that is not zoned, we should not return any data and set the status to NVME_SC_INVALID_FIELD. While at it, it is also better to revalidate the ns block devie *before* checking if the block device is zoned, to ensure that nvmet_execute_identify_cns_cs_ns() operates against updated device characteristics. Fixes: aaf2e048af27 ("nvmet: add ZBD over ZNS backend support") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-13nvme-pci: drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-11s390/dasd: fix hanging blockdevice after request requeueStefan Haberland
The DASD driver does not kick the requeue list when requeuing IO requests to the blocklayer. This might lead to hanging blockdevice when there is no other trigger for this. Fix by automatically kick the requeue list when requeuing DASD requests to the blocklayer. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-11s390/dasd: add autoquiesce event for start IO errorStefan Haberland
Add a check for errors in the start_io function that signal a not working device. Trigger an autoquiesce event in that case. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-7-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-11s390/dasd: add aq_timeouts autoquiesce triggerStefan Haberland
Add a sysfs attribute aq_timeouts that controls after how many timeouts a autoquiesce event might be triggered. The default value is 32768 which is the maximum number of retries for the DASD device driver DASD_RETRIES_MAX. This means that the timeout trigger will never happen. The default value for DASD retries is 255. Setting the value to below 255 will trigger the timeout autoquiesce event before an IO error is generated. Also add the check for the configured amount of timeouts and trigger an autoquiesce event if exceeded. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-11s390/dasd: add aq_requeue sysfs attributeStefan Haberland
Add a sysfs attribute to control if all IO requests will be requeued to the blocklayer in case of an autoquiesce event or not. A value of 1 means that in case of an autoquiesce event all IO requests will be requeued to the blocklayer. A value of 0 means that the device will only be stopped. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-11s390/dasd: add aq_mask sysfs attributeStefan Haberland
Add sysfs attribute that controls the DASD autoquiesce feature. The autoquiesce is disabled when 0 is echoed to the attribute. A value greater than 0 will enable the feature. The aq_mask attribute will accept an unsigned integer and the value will be interpreted as bitmask defining the trigger events that will lead to an automatic quiesce. The following autoquiesce triggers will currently be available: DASD_EER_FATALERROR 1 - any final I/O error DASD_EER_NOPATH 2 - no remaining paths for the device DASD_EER_STATECHANGE 3 - a state change interrupt occurred DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended DASD_EER_NOSPC 5 - there is no space remaining on an ESE device DASD_EER_TIMEOUT 6 - a certain amount of timeouts occurred DASD_EER_STARTIO 7 - the IO start function encountered an error The currently supported maximum value is 255. Bit 31 is reserved for internal usage. Bit 0 is not used. Example: - deactivate autoquiesce $ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask - enable autoquiesce for FATALERROR, NOPATH and TIMEOUT (0000 0000 0000 0000 0000 0000 0100 0110 => 70) $ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-11s390/dasd: add autoquiesce featureStefan Haberland
Add the internal logic to check for autoquiesce triggers and handle them. Quiesce and resume are functions that tell Linux to stop/resume issuing I/Os to a specific DASD. The DASD driver allows a manual quiesce/resume via ioctl. Autoquiesce will define an amount of triggers that will lead to an automatic quiesce if a certain event occurs. There is no automatic resume. All events will be reported via DASD Extended Error Reporting (EER) if configured. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-11s390/dasd: remove unused DASD EER definesStefan Haberland
Remove definitions that have never been used. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Link: https://lore.kernel.org/r/20230405142017.2446986-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-06blk-cgroup: delete cpd_init_fn of blkcg_policyChengming Zhou
blkcg_policy cpd_init_fn() is used to just initialize some default fields of policy data, which is enough to do in cpd_alloc_fn(). This patch delete the only user bfq_cpd_init(), and remove cpd_init_fn from blkcg_policy. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-4-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-06blk-cgroup: delete cpd_bind_fn of blkcg_policyChengming Zhou
cpd_bind_fn is just used for update default weight when block subsys attached to a hierarchy. No any policy need it anymore. Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-3-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-06block, bfq: remove BFQ_WEIGHT_LEGACY_DFLChengming Zhou
BFQ_WEIGHT_LEGACY_DFL is the same as CGROUP_WEIGHT_DFL, which means we don't need cpd_bind_fn() callback to update default weight when attached to a hierarchy. This patch remove BFQ_WEIGHT_LEGACY_DFL and cpd_bind_fn(). Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230406145050.49914-2-zhouchengming@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: Add command to read locking range parameters.Ondrej Kozina
It returns following attributes: locking range start locking range length read lock enabled write lock enabled lock state (RW, RO or LK) It can be retrieved by user authority provided the authority was added to locking range via prior IOC_OPAL_ADD_USR_TO_LR ioctl command. The command was extended to add user in ACE that allows to read attributes listed above. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-6-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: add helper to get multiple columns at once.Ondrej Kozina
Refactors current code querying single column to use the new helper. Real multi column usage will be added later. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-5-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: allow user authority to get locking range attributes.Ondrej Kozina
Extend ACE set of locking range attributes accessible to user authority. This patch allows user authority to get following locking range attribues when user get added to locking range via IOC_OPAL_ADD_USR_TO_LR: locking range start locking range end read lock enabled write lock enabled read locked write locked lock on reset active key Note: Admin1 authority always remains in the ACE. Otherwise it breaks current userspace expecting Admin1 in the ACE (sedutils). See TCG OPAL2 s.4.3.1.7 "ACE_Locking_RangeNNNN_Get_RangeStartToActiveKey". Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230405111223.272816-4-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: add helper for adding user authorities in ACE.Ondrej Kozina
Move ACE construction away from add_user_to_lr routine and refactor it to be used also in later code. Also adds boolean operators defines from TCG Core specification. Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Link: https://lore.kernel.org/r/20230405111223.272816-3-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-05sed-opal: do not add same authority twice in boolean ace.Ondrej Kozina
While adding user authority in boolean ace value of uid OPAL_LOCKINGRANGE_ACE_WRLOCKED or OPAL_LOCKINGRANGE_ACE_RDLOCKED, it was added twice. It seemed redundant when only single authority was added in the set method aka { authority1, authority1, OR }: TCG Storage Architecture Core Specification, 5.1.3.3 ACE_expression "This is an alternative type where the options are either a uidref to an Authority object or one of the boolean_ACE (AND = 0 and OR = 1) options. This type is used within the AC_element list to form a postfix Boolean expression of Authorities." Signed-off-by: Ondrej Kozina <okozina@redhat.com> Tested-by: Luca Boccassi <bluca@debian.org> Tested-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230405111223.272816-2-okozina@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-02block: ublk_drv: cleanup 'struct ublk_map_data'Ming Lei
'struct ublk_map_data' is passed to ublk_copy_user_pages() for copying data between userspace buffer and request pages. Here what matters is userspace buffer address/len and 'struct request', so replace ->io field with user buffer address, and rename max_bytes as len. Meantime remove 'ubq' field from ublk_map_data, since it isn't used any more. Then code becomes more readable. Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-02block: ublk_drv: clean up several helpersMing Lei
Convert the following pattern in several helpers if (Z) return true return false into: return Z; Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-02block: ublk_drv: add two helpers to clean up map/unmap requestMing Lei
Add two helpers for checking if map/unmap is needed, since we may have passthrough request which needs map or unmap in future, such as for supporting report zones. Meantime don't mark ublk_copy_user_pages as inline since this function is a bit fat now. Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-02block: ublk_drv: don't consider flush request in map/unmap ioMing Lei
There isn't data in request of REQ_OP_FLUSH always, so don't consider it in both ublk_map_io() and ublk_unmap_io(). Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-02block: ublk_drv: add common exit handlingMing Lei
Simplify exit handling a bit, and prepare for supporting fused command. Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01drbd: Pass a peer device to the resync and online verify functionsChristoph Böhmwalder
Originally-from: Andreas Grünbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01drbd: pass drbd_peer_device to __req_modChristoph Böhmwalder
In preparation to support multiple connections, we need to know which one we need to modify the request state for. Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01drbd: drbd_uuid_compare: pass a peer_deviceChristoph Böhmwalder
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01drbd: INFO_bm_xfer_stats(): Pass a peer device argumentAndreas Gruenbacher
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01drbd: Add peer device parameter to whole-bitmap I/O handlersAndreas Gruenbacher
Pass a peer device parameter through the bitmap I/O functions to the I/O handlers. In after_state_ch(), set that parameter when queuing the drbd_send_bitmap operation so that this operation knows where to send the bitmap. Signed-off-by: Andreas Gruenbacher <agruen@kernel.org> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01drbd: Rip out the ERR_IF_CNT_IS_NEGATIVE macroAndreas Gruenbacher
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01genetlink: make _genl_cmd_to_str staticChristoph Böhmwalder
Primarily to silence warnings like: warning: no previous prototype for 'xxx_genl_cmd_to_str' [-Wmissing-prototypes] Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20230330102744.2128122-2-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01null_blk: use kmap_local_page() and kunmap_local()Chaitanya Kulkarni
Replace the deprecated API kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local() in null_flush_cache_page(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230330184926.64209-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-01null_blk: use non-deprecated lib functionsChaitanya Kulkarni
Use library helper memcpy_page() to copy source page into destination instead of having duplicate code in copy_to_nullb() & copy_from_nullb(). In copy_from_nullb() also replace the memset call with zero_user(). Use library helper memset_page() to set the buffer to 0xFF instead of having duplicate code. This also removes deprecated API kmap_atomic() from copy_to_nullb() copy_from_nullb() and nullb_fill_pattern(), from :include/linux/highmem.h: "kmap_atomic - Atomically map a page for temporary usage - Deprecated!" Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230330184926.64209-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-27block: open code __blk_account_io_done()Chaitanya Kulkarni
There is only one caller for __blk_account_io_done(), the function is small enough to fit in its caller blk_account_io_done(). Remove the function and opencode in the its caller blk_account_io_done(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-27block: open code __blk_account_io_start()Chaitanya Kulkarni
There is only one caller for __blk_account_io_start(), the function is small enough to fit in its caller blk_account_io_start(). Remove the function and opencode in the its caller blk_account_io_start(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230327073427.4403-2-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-20blk-mq: remove hybrid pollingKeith Busch
io_uring provides the only way user space can poll completions, and that always sets BLK_POLL_NOSLEEP. This effectively makes hybrid polling dead code, so remove it and everything supporting it. Hybrid polling was effectively killed off with 9650b453a3d4b1, "block: ignore RWF_HIPRI hint for sync dio", but still potentially reachable through io_uring until d729cf9acb93119, "io_uring: don't sleep when polling for I/O", but hybrid polling probably should not have been reachable through that async interface from the beginning. Fixes: 9650b453a3d4 ("block: ignore RWF_HIPRI hint for sync dio") Fixes: d729cf9acb93 ("io_uring: don't sleep when polling for I/O") Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20230320194926.3353144-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: drop the NULL check from blk_crypto_put_keyslot()Eric Biggers
Now that all callers of blk_crypto_put_keyslot() check for NULL before calling it, there is no need for blk_crypto_put_keyslot() to do the NULL check itself. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-mq: return actual keyslot error in blk_insert_cloned_request()Eric Biggers
To avoid hiding information, pass on the error code from blk_crypto_rq_get_keyslot() instead of always using BLK_STS_IOERR. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: remove blk_crypto_insert_cloned_request()Eric Biggers
blk_crypto_insert_cloned_request() is the same as blk_crypto_rq_get_keyslot(), so just use that directly. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: make blk_crypto_evict_key() more robustEric Biggers
If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments. Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-crypto: make blk_crypto_evict_key() return voidEric Biggers
blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So there is nothing the caller can do with errors except log them. (dm-table.c does "use" the error code, but only to pass on to upper layers, so it doesn't really count.) Just make blk_crypto_evict_key() return void and log errors itself. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-16blk-mq: release crypto keyslot before reporting I/O completeEric Biggers
Once all I/O using a blk_crypto_key has completed, filesystems can call blk_crypto_evict_key(). However, the block layer currently doesn't call blk_crypto_put_keyslot() until the request is being freed, which happens after upper layers have been told (via bio_endio()) the I/O has completed. This causes a race condition where blk_crypto_evict_key() can see 'slot_refs != 0' without there being an actual bug. This makes __blk_crypto_evict_key() hit the 'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without doing anything, eventually causing a use-after-free in blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only been seen when per-file keys are being used with fscrypt.) There are two options to fix this: either release the keyslot before bio_endio() is called on the request's last bio, or make __blk_crypto_evict_key() ignore slot_refs. Let's go with the first solution, since it preserves the ability to report bugs (via WARN_ON_ONCE) where a key is evicted while still in-use. Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq") Cc: stable@vger.kernel.org Reviewed-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14nbd: use the structured req attr checkJakub Kicinski
Use the macro for checking presence of required attributes. It has the advantage of reporting to the user which attr was missing in a machine-readable format (extack). Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230224021301.1630703-2-kuba@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14nbd: allow genl access outside init_netJakub Kicinski
NBD doesn't have much to do with networking, allow users outside init_net to access the family. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230224021301.1630703-1-kuba@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-12Linux 6.3-rc2v6.3-rc2Linus Torvalds
2023-03-12wifi: cfg80211: Partial revert "wifi: cfg80211: Fix use after free for wext"Hector Martin
This reverts part of commit 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext") This commit broke WPA offload by unconditionally clearing the crypto modes for non-WEP connections. Drop that part of the patch. Signed-off-by: Hector Martin <marcan@marcan.st> Reported-by: Ilya <me@0upti.me> Reported-and-tested-by: Janne Grunau <j@jannau.net> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Fixes: 015b8cc5e7c4 ("wifi: cfg80211: Fix use after free for wext") Cc: stable@kernel.org Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-12Merge tag 'tpm-v6.3-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "Two additional bug fixes for v6.3" * tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm: disable hwrng for fTPM on some AMD designs tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
2023-03-12tpm: disable hwrng for fTPM on some AMD designsMario Limonciello
AMD has issued an advisory indicating that having fTPM enabled in BIOS can cause "stuttering" in the OS. This issue has been fixed in newer versions of the fTPM firmware, but it's up to system designers to decide whether to distribute it. This issue has existed for a while, but is more prevalent starting with kernel 6.1 because commit b006c439d58db ("hwrng: core - start hwrng kthread also for untrusted sources") started to use the fTPM for hwrng by default. However, all uses of /dev/hwrng result in unacceptable stuttering. So, simply disable registration of the defective hwrng when detecting these faulty fTPM versions. As this is caused by faulty firmware, it is plausible that such a problem could also be reproduced by other TPM interactions, but this hasn't been shown by any user's testing or reports. It is hypothesized to be triggered more frequently by the use of the RNG because userspace software will fetch random numbers regularly. Intentionally continue to register other TPM functionality so that users that rely upon PCR measurements or any storage of data will still have access to it. If it's found later that another TPM functionality is exacerbating this problem a module parameter it can be turned off entirely and a module parameter can be introduced to allow users who rely upon fTPM functionality to turn it on even though this problem is present. Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2023-03-12tpm/eventlog: Don't abort tpm_read_log on faulty ACPI addressMorten Linderud
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI table is found. If the firmware vendor includes an invalid log address we are unable to map from the ACPI memory and tpm_read_log() returns -EIO which would abort discovery of the eventlog. Change the return value from -EIO to -ENODEV when acpi_os_map_iomem() fails to map the event log. The following hardware was used to test this issue: Framework Laptop (Pre-production) BIOS: INSYDE Corp, Revision: 3.2 TPM Device: NTC, Firmware Revision: 7.2 Dump of the faulty ACPI TPM2 table: [000h 0000 4] Signature : "TPM2" [Trusted Platform Module hardware interface Table] [004h 0004 4] Table Length : 0000004C [008h 0008 1] Revision : 04 [009h 0009 1] Checksum : 2B [00Ah 0010 6] Oem ID : "INSYDE" [010h 0016 8] Oem Table ID : "TGL-ULT" [018h 0024 4] Oem Revision : 00000002 [01Ch 0028 4] Asl Compiler ID : "ACPI" [020h 0032 4] Asl Compiler Revision : 00040000 [024h 0036 2] Platform Class : 0000 [026h 0038 2] Reserved : 0000 [028h 0040 8] Control Address : 0000000000000000 [030h 0048 4] Start Method : 06 [Memory Mapped I/O] [034h 0052 12] Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00 [040h 0064 4] Minimum Log Length : 00010000 [044h 0068 8] Log Address : 000000004053D000 Fixes: 0cf577a03f21 ("tpm: Fix handling of missing event log") Tested-by: Erkki Eilonen <erkki@bearmetal.eu> Signed-off-by: Morten Linderud <morten@linderud.pw> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 16:05:20 +0000