summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-28gpu: host1x: Use iommu_paging_domain_alloc()Lu Baolu
An iommu domain is allocated in host1x_iommu_attach() and is attached to host->dev. Use iommu_paging_domain_alloc() to make it explicit. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240610085555.88197-8-baolu.lu@linux.intel.com Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240812071605.9513-1-baolu.lu@linux.intel.com
2024-08-28gpu: host1x: Request syncpoint IRQs only during probeMikko Perttunen
Syncpoint IRQs are currently requested in a code path that runs during resume. Due to this, we get multiple overlapping registered interrupt handlers as host1x is suspended and resumed. Rearrange interrupt code to only request IRQs during initialization. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240531070719.2138-1-cyndis@kapsi.fi
2024-08-28drm/ci: increase timeout for all jobsVignesh Raman
Set the timeout of all drm-ci jobs to 1h30m since some jobs takes more than 1 hour to complete. Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Acked-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240820070818.1124403-1-vignesh.raman@collabora.com
2024-08-28drm/panel: add BOE tv101wum-ll2 panel driverNeil Armstrong
Add support for the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found in the Lenovo Smart Tab M10 tablet. The controller is unknown. Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240828-topic-sdm450-upstream-tbx605f-panel-v3-2-b792f93e1d6b@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sdm450-upstream-tbx605f-panel-v3-2-b792f93e1d6b@linaro.org
2024-08-28dt-bindings: display: panel: document BOE TV101WUM-LL2 DSI Display PanelNeil Armstrong
Document the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found in the Lenovo Smart Tab M10 tablet. The controller is unknown. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240828-topic-sdm450-upstream-tbx605f-panel-v3-1-b792f93e1d6b@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sdm450-upstream-tbx605f-panel-v3-1-b792f93e1d6b@linaro.org
2024-08-28MAINTAINERS: remove myself as a VKMS maintainerMelissa Wen
I haven't been able to follow or review the work on the driver for some time now and I don't see the situation improving anytime soon. I'd like to continue being listed as a reviewer. Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Acked-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240525142637.82586-1-melissa.srw@gmail.com
2024-08-27Revert "drm/panel-edp: Add SDC ATNA45AF01"Stephan Gerhold
This reverts commit 8ebb1fc2e69ab8b89a425e402c7bd85e053b7b01. The panel should be handled through the samsung-atna33xc20 driver for correct power up timings. Otherwise the backlight does not work correctly. We have existing users of this panel through the generic "edp-panel" compatible (e.g. the Qualcomm X1E80100 CRD), but the screen works only partially in that configuration: It works after boot but once the screen gets disabled it does not turn on again until after reboot. It behaves the same way with the default "conservative" timings, so we might as well drop the configuration from the panel-edp driver. That way, users with old DTBs will get a warning and can move to the new driver. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240715-x1e80100-crd-backlight-v2-2-31b7f2f658a3@linaro.org
2024-08-26drm: Expand max DRM device number to full MINORBITSMichał Winiarski
Having a limit of 64 DRM devices is not good enough for modern world where we have multi-GPU servers, SR-IOV virtual functions and virtual devices used for testing. Let's utilize full minor range for DRM devices. To avoid regressing the existing userspace, we're still maintaining the numbering scheme where 0-63 is used for primary, 64-127 is reserved (formerly for control) and 128-191 is used for render. For minors >= 192, we're allocating minors dynamically on a first-come, first-served basis. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-4-michal.winiarski@intel.com Acked-by: James Zhu <James.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2024-08-26accel: Use XArray instead of IDR for minorsMichał Winiarski
Accel minor management is based on DRM (and is also using struct drm_minor internally), since DRM is using XArray for minors, it makes sense to also convert accel. As the two implementations are identical (only difference being the underlying xarray), move the accel_minor_* functionality to DRM. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Acked-by: James Zhu <James.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-3-michal.winiarski@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-08-26drm: Use XArray instead of IDR for minorsMichał Winiarski
IDR is deprecated, and since XArray manages its own state with internal locking, it simplifies the locking on DRM side. Additionally, don't use the IRQ-safe variant, since operating on drm minor is not done in IRQ context. Suggested-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Acked-by: James Zhu <James.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823163048.2676257-2-michal.winiarski@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-08-26drm: Fix kerneldoc for "Returns" sectionrenjun wang
The blank line between title "Returns:" and detail description is not allowed, otherwise the title will goes under the description block in generated .html file after running `make htmldocs`. There are a few examples for current kerneldoc at [1][2][3]. v2: - use Link tag with stable URLs Signed-off-by: renjun wang <renjunw0@foxmail.com> Link: https://www.kernel.org/doc/html/v6.10/gpu/drm-kms.html#c.drm_crtc_commit_wait # 1 Link: https://www.kernel.org/doc/html/v6.10/gpu/drm-kms.html#c.drm_atomic_get_crtc_state # 2 Link: https://www.kernel.org/doc/html/v6.10/gpu/i915.html#c.i915_vma_pin_fence # 3 Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/tencent_37A873672B5CD20DECAF99DEDAC5E45C3106@qq.com
2024-08-26drm/atomic: fix kerneldoc for fake_commit fieldrenjun wang
According to the context, the function description for fake_commit should be "prevent the atomic states from being freed too early" Signed-off-by: renjun wang <renjunw0@foxmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/tencent_6EF2603DCCFAD6A8265F8AAD9D6D5BCB9309@qq.com
2024-08-26drm/panel-edp: add BOE NE140WUM-N6G panel entryAbel Vesa
Add an eDP panel entry for BOE NE140WUM-N6G. Due to lack of documentation, use the delay_200_500_e80 timings like some other BOE entries for now. The raw edid of the panel is: 00 ff ff ff ff ff ff 00 09 e5 66 0b 00 00 00 00 1a 20 01 04 a5 1e 13 78 07 01 5f a7 54 4c 9b 24 11 51 56 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 9c 3e 80 c8 70 b0 3c 40 30 20 36 00 2e bc 10 00 00 1a 16 32 80 c8 70 b0 3c 40 30 20 36 00 2e bc 10 00 00 1a 00 00 00 fd 00 1e 3c 4c 4c 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 4e 45 31 34 30 57 55 4d 2d 4e 36 47 0a 00 dc Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240826-drm-panel-edp-add-boe-ne140wum-n6g-v2-1-2758e8574842@linaro.org
2024-08-26drm: renesas: rz-du: Add RZ/G2UL DU SupportBiju Das
The LCD controller is composed of Frame Compression Processor (FCPVD), Video Signal Processor (VSPD), and Display Unit (DU). It has DPI interface and supports a maximum resolution of WXGA along with 2 RPFs to support the blending of two picture layers and raster operations (ROPs). The DU module is connected to VSPD. Add RZ/G2UL DU support. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822162320.5084-3-biju.das.jz@bp.renesas.com
2024-08-26dt-bindings: display: renesas,rzg2l-du: Document RZ/G2UL DU bindingsBiju Das
Document DU found in RZ/G2UL SoC. The DU block is identical to RZ/G2L SoC, but has only DPI interface. While at it, add missing required property port@1 for RZ/G2L and RZ/V2L SoCs. Currently there is no user for the DPI interface and hence there won't be any ABI breakage for adding port@1 as required property for RZ/G2L and RZ/V2L SoCs. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822162320.5084-2-biju.das.jz@bp.renesas.com
2024-08-26drm: renesas: Move RZ/G2L MIPI DSI driver to rz-duLad Prabhakar
All the RZ/G2L DU specific components are located under the rz-du folder, so it makes sense to move the RZ/G2L MIPI DSI driver there instead of keeping it in the rcar-du folder. This change improves the organization and modularity of the driver configuration by grouping related settings together. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240625123244.200533-1-prabhakar.mahadev-lad.rj@bp.renesas.com
2024-08-26drm: omapdrm: Add missing check for alloc_ordered_workqueueMa Ke
As it may return NULL pointer and cause NULL pointer dereference. Add check for the return value of alloc_ordered_workqueue. Cc: stable@vger.kernel.org Fixes: 2f95bc6d324a ("drm: omapdrm: Perform initialization/cleanup at probe/remove time") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240808061336.2796729-1-make24@iscas.ac.cn
2024-08-26drm/ttm: fix kernel-doc typo for @trylock_onlyJani Nikula
s/tryock_only/trylock_only/ Fixes: da966b82bf3d ("drm/ttm: Provide a generic LRU walker helper") Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240823141110.3431423-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-23drm/amd/display: use a more lax vblank enable policy for older ASICsHamza Mahfooz
Ideally, we want to drop the legacy vblank enable for older ASICs. This should be possible now, since we can now specify how many frames we need to wait before disabling vblanking instead of being forced to either choose between no delay (which can still be buggy) and drm_vblank_offdelay (which is much longer by default than is required on AMD hardware). Suggested-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-4-hamza.mahfooz@amd.com
2024-08-23drm/amd/display: use a more lax vblank enable policy for DCN35+Hamza Mahfooz
Ideally, we want to enable immediate vblank disable, when possible and we should be able to do so on DCN35+, if PSR isn't supported by a given CRTC. Suggested-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-3-hamza.mahfooz@amd.com
2024-08-23drm/amd/display: use new vblank enable policy for DCN35+Hamza Mahfooz
Hook up drm_crtc_vblank_on_config() in amdgpu_dm. So, that we can enable PSR and other static screen optimizations more quickly, while avoiding stuttering issues that are accompanied by the following dmesg error: [drm:dc_dmub_srv_wait_idle [amdgpu]] *ERROR* Error waiting for DMUB idle: status=3 This also allows us to mimic how vblanking is handled by the Windows amdgpu driver. Specifically, we wait two idle frames before disabling the vblank timer there. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822161856.174600-2-hamza.mahfooz@amd.com
2024-08-23drm/panic: Add a QR code panic screenJocelyn Falempe
This patch adds a new panic screen, with a QR code and the kmsg data embedded. If DRM_PANIC_SCREEN_QR_CODE_URL is set, then the kmsg data will be compressed with zlib and encoded as a numerical segment, and appended to the URL as a URL parameter. This allows to save space, and put about ~7500 bytes of kmsg data, in a V40 QR code. Linux distributions can customize the URL, and put a web frontend to directly open a bug report with the kmsg data. Otherwise the kmsg data will be encoded as a binary segment (ie raw ascii) and only a maximum of 2953 bytes of kmsg data will be available in the QR code. You can also limit the QR code size with DRM_PANIC_SCREEN_QR_VERSION. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-5-jfalempe@redhat.com
2024-08-23drm/panic: Simplify logo handlingJocelyn Falempe
Move logo rectangle initialisation, and logo drawing in separate functions, so they can be re-used by different panic screens. It prepares the introduction of the QR code panic screen. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-4-jfalempe@redhat.com
2024-08-23drm/rect: Add drm_rect_overlap()Jocelyn Falempe
Check if two rectangles overlap. It's a bit similar to drm_rect_intersect() but this won't modify the rectangle. Simplifies a bit drm_panic. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-3-jfalempe@redhat.com
2024-08-23drm/panic: Add integer scaling to blit()Jocelyn Falempe
Add a parameter to the blit function, to upscale the image. This is necessary to draw a QR code, otherwise, the pixels are usually too small to be readable by most QR code reader. It can also be used later for drawing fonts on high DPI display. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240822073852.562286-2-jfalempe@redhat.com
2024-08-22drm/vc4: v3d: simplify clock retrievalStefan Wahren
Common pattern of handling deferred probe can be simplified with dev_err_probe() and devm_clk_get_optional(). This results in much less code. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-6-wahrenst@gmx.net
2024-08-22drm/vc4: Get the rid of DRM_ERROR()Stefan Wahren
DRM_ERROR() has been deprecated in favor of pr_err(). However, we should prefer to use drm_err() whenever possible so we get device- specific output with the error message. In error case of kcalloc, we can simply drop DRM_ERROR(), because kcalloc already logs errors. Suggested-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-4-wahrenst@gmx.net
2024-08-22drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_getStefan Wahren
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect") introduced the necessary power management handling to avoid register access while controller is powered down. Unfortunately it just print a warning if pm_runtime_resume_and_get() fails and proceed anyway. This could happen during suspend to idle. So we must assume it is unsafe to access the HDMI register. So bail out properly. Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maíra Canal <mcanal@igalia.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-3-wahrenst@gmx.net
2024-08-22drm/ast: Remove BMC outputThomas Zimmermann
Ast's BMC connector tracks the status of an underlying physical connector and updates the BMC status accordingly. This functionality works around GNOME's settings app, which cannot handle multiple outputs on the same CRTC. The workaround is now obsolete as all code for physical outputs handle BMC support internally. Hence, remove the driver's code and the BMC output entirely. v3: - remove struct ast_bmc_connector Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-12-tzimmermann@suse.de
2024-08-22drm/ast: vga: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-11-tzimmermann@suse.de
2024-08-22drm/ast: sil164: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-10-tzimmermann@suse.de
2024-08-22drm/ast: dp501: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-9-tzimmermann@suse.de
2024-08-22drm/ast: dp501: Use struct drm_edid and helpersThomas Zimmermann
Convert DP501 support to struct drm_edid and its helpers. Simplifies and modernizes the EDID handling. The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes. v2: - fix reading EDID data Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-8-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Transparently handle BMC supportThomas Zimmermann
Permanently set the connector status to 'connected'. Return BMC modes for connector if no display is attached to the physical DP connector. Otherwise use EDID modes as before. If the status of the physical connector changes, the driver still generates a hotplug event. DRM clients will then reconfigure their output to a mode appropriate for either physical display or BMC. v3: - use struct ast_connector.physical_status to handle BMC Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-7-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Simplify power management when detecting displayThomas Zimmermann
Remove the CRTC handling in the ASTDP detect_ctx helper and enable power while the detecting the display. Unconditionally wait a few milliseconds after switching power. Simplifies the code and makes it more robust. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-6-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Use struct drm_edid and helpersThomas Zimmermann
Convert ASTDP support to struct drm_edid and its helpers. Simplifies and modernizes the EDID handling. The driver reads 4 bytes at once, but the overall read length is now variable. Therefore update the EDID read loop to never return more than the requested bytes. The device does not seem to support EDID extensions, as the driver actively clears any such information from the main EDID header. As the new interface allows for reading extension blocks for EDID, make sure that the block is always 0 (i.e., the main header). A later update might fix that. v2: - fix reading if len is not a multiple of 4 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-5-tzimmermann@suse.de
2024-08-22drm/ast: astdp: Move locking into EDID helperThomas Zimmermann
The modeset mutex protects EDID retrival from concurrent modeset operations. Acquire the lock in ast_astdp_read_edid(). Prepares the code for conversion to struct drm_edid. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-4-tzimmermann@suse.de
2024-08-22drm/ast: Add struct ast_connectorThomas Zimmermann
Add struct ast_connector to track a connector's physical status. With the upcoming BMC support, the physical status can be different from the reported status. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-3-tzimmermann@suse.de
2024-08-22drm/ast: Move code for physical outputs into separate filesThomas Zimmermann
Move the modesetting code for the various transmitter chips into their own source files before adding BMC support. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240815151953.184679-2-tzimmermann@suse.de
2024-08-20drm/panel: jdi-fhd-r63452: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the jdi-fhd-r63452 panel to use multi style functions for improved error handling. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240818060816.848784-3-tejasvipin76@gmail.com
2024-08-20drm/mipi-dsi: Add mipi_dsi_dcs_set_tear_scanline_multiTejas Vipin
mipi_dsi_dcs_set_tear_scanline_multi can heavily benefit from being converted to a multi style function as it is often called in the context of similar functions. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240818060816.848784-2-tejasvipin76@gmail.com
2024-08-20drm/panel: ili9341: Add comments for registers in ili9341_config()Abhishek Tamboli
Add detail comments for registers definitions in struct ili9341_config(). Replace TODO with comment for each registers. Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240819175122.33176-1-abhishektamboli9@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240819175122.33176-1-abhishektamboli9@gmail.com
2024-08-20drm/panel: mantix-mlaf057we51: write hex in lowercaseTejas Vipin
Converts uppercase hex to lowercase hex for cleanup. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240820091556.1032726-3-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240820091556.1032726-3-tejasvipin76@gmail.com
2024-08-20drm/panel: mantix-mlaf057we51: transition to mipi_dsi wrapped functionsTejas Vipin
Changes the mantix-mlaf057we51 panel to use multi style functions for improved error handling. Reviewed-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Link: https://lore.kernel.org/r/20240820091556.1032726-2-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240820091556.1032726-2-tejasvipin76@gmail.com
2024-08-19drm/panel: jd9365da: Modify the init code of MelfasZhaoxiong Lv
Modify the Melfas panel init code to satisfy the gamma value of 2.2 Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240807100429.13260-3-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-3-lvzhaoxiong@huaqin.corp-partner.google.com
2024-08-19drm/panel: jd9365da: Move "exit sleep mode" and "set display on" cmdsZhaoxiong Lv
Move the "exit sleep mode" and "set display on" command from enable() to init() function. As mentioned in the patch: https://lore.kernel.org/all/20240624141926.5250-2-lvzhaoxiong@huaqin.corp-partner.google.com/ The Mediatek Soc DSI host has different modes in prepare() and enable() functions, prepare() is in LP mode and enable() is in HS mode. Since the "exit sleep mode" and "set display on" command must also be sent in LP mode, so we also move "exit sleep mode" and "set display on" command to the init() function. We have no other actions in the enable() function after moves "exit sleep mode" and "set display on", and we checked the call of the enable() function during the "startup" process. It seems that only one judgment was made in drm_panel_enabel(). If the panel does not define enable(), the judgment will skip the enable() and continue execution. This does not seem to have any other effect, and we found that some drivers also seem to have no enable() function added, for example: panel-asus-z00t-tm5p5-n35596 / panel-boe-himax8279d... In addition, we briefly tested the kingdisplay_kd101ne3 panel and melfas_lmfbx101117480 panel, and it seems that there is no garbage on the panel, so we delete enable() function. After moving the "exit sleep mode" and "set display on" command to the init() function, we no longer need additional delay judgment, so we delete variables "exit_sleep_to_display_on_delay_ms" and "display_on_delay_ms". Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240807100429.13260-2-lvzhaoxiong@huaqin.corp-partner.google.com
2024-08-19drm/panel: simple: Add ON Tat Industrial Company KD50G21-40NT-A1 panelLiu Ying
ON Tat Industrial Company KD50G21-40NT-A1 is a 5" WVGA LCD panel with DPI interface. The LCD module specification can be found at: https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240816085004.491494-3-victor.liu@nxp.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240816085004.491494-3-victor.liu@nxp.com
2024-08-19dt-bindings: display: panel-simple: Add On Tat Industrial Company ↵Liu Ying
KD50G21-40NT-A1 Document On Tat Industrial Company KD50G21-40NT-A1 5" WVGA TFT LCD panel. The LCD module specification can be found at: https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf Signed-off-by: Liu Ying <victor.liu@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240816085004.491494-2-victor.liu@nxp.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240816085004.491494-2-victor.liu@nxp.com
2024-08-19drm/panel: st7701: Add Anbernic RG28XX panel supportHironori KIKUCHI
The Anbernic RG28XX is a handheld gaming device with a 2.8 inch 480x640 display. Add support for the display panel. This panel is driven by a variant of ST7701 driver IC internally, confirmed by dumping and analyzing its BSP initialization sequence by using a logic analyzer. It is very similar to the existing densitron,dmt028vghmcmi-1a panel, but differs in some unknown register values. Besides, it is connected via SPI, so add a new entry for the panel. Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240804061503.881283-6-kikuchan98@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-6-kikuchan98@gmail.com
2024-08-19drm/panel: st7701: Add support for SPI for configurationHironori KIKUCHI
The ST7701 supports not only MIPI DSI, but also SPI as an interface for configuration. To support a panel connected via SPI with an RGB parallel interface, add support for SPI using MIPI DBI helpers. Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240804061503.881283-5-kikuchan98@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240804061503.881283-5-kikuchan98@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 22:06:18 +0000