Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- followup fix for direct io and fsync under some conditions, reported
by QEMU users
- fix a potential leak when disabling quotas while some extent tracking
work can still happen
- in zoned mode handle unexpected change of zone write pointer in
RAID1-like block groups, turn the zones to read-only
* tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between direct IO write and fsync when using same fd
btrfs: zoned: handle broken write pointer on zones
btrfs: qgroup: don't use extent changeset when not needed
|
|
Pull smb server fixes from Steve French:
- Fix crash in session setup
- Fix locking bug
- Improve access bounds checking
* tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Unlock on in ksmbd_tcp_set_interfaces()
ksmbd: unset the binding mark of a reused connection
smb: Annotate struct xattr_smb_acl with __counted_by()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two netfs fixes for this merge window:
- Ensure that fscache_cookie_lru_time is deleted when the fscache
module is removed to prevent UAF
- Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
Before it used truncate_inode_pages_partial() which causes
copy_file_range() to fail on cifs"
* tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF
mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
|
|
Fix circular locking dependency on runtime suspend.
<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.
The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c89 ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da19441d0a02b53e362df81843bb20db3a8006a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Enable/Disable user access only during system suspend/resume.
This should not happen during runtime s/r
v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-2-vinod.govindapillai@intel.com
(cherry picked from commit a64e7e5b05e014dad9ae5858c9644d61400ec6ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Suspend fbdev sooner, and disable user access before suspending to
prevent some races. I've noticed this when comparing xe suspend to
i915's.
Matches the following commits from i915:
24b412b1bfeb ("drm/i915: Disable intel HPD poll after DRM poll init/enable")
1ef28d86bea9 ("drm/i915: Suspend the framebuffer console earlier during system suspend")
bd738d859e71 ("drm/i915: Prevent modesets during driver init/shutdown")
Thanks to Imre for pointing me to those commits.
Driver shutdown is currently missing, but I have some idea how to
implement it next.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806105044.596842-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 492be2a070f023c66aaef6ebd664567fda28c2a6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Ole reported that event->mmap_mutex is strictly insufficient to
serialize the AUX buffer, add a per RB mutex to fully serialize it.
Note that in the lock order comment the perf_event::mmap_mutex order
was already wrong, that is, it nesting under mmap_lock is not new with
this patch.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Reported-by: Ole <ole@binarygecko.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull ARM fix from Russell King:
- Fix a build issue with older binutils with LD dead code elimination
disabled
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION
|
|
Fixes this missed case:
xe 0000:00:02.0: [drm] Missing outer runtime PM protection
WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __warn+0x94/0x1b0
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
? report_bug+0x1b7/0x1d0
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
xe_device_declare_wedged+0x91/0x280 [xe]
gt_reset_worker+0xa2/0x250 [xe]
v2: Also move get and get the right Fixes tag (Himal, Brost)
Fixes: fb74b205cdd2 ("drm/xe: Introduce a simple wedged state")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit bc947d9a8c3ebd207e52c0e35cfc88f3e1abe54f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fix from Helge Deller:
- Fix boot issue where boot memory is marked read-only too early
* tag 'parisc-for-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Delay write-protection until mark_rodata_ro() call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes, 15 of which are cc:stable.
Mostly MM, no identifiable theme. And a few nilfs2 fixups"
* tag 'mm-hotfixes-stable-2024-09-03-20-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
alloc_tag: fix allocation tag reporting when CONFIG_MODULES=n
mm: vmalloc: optimize vmap_lazy_nr arithmetic when purging each vmap_area
mailmap: update entry for Jan Kuliga
codetag: debug: mark codetags for poisoned page as empty
mm/memcontrol: respect zswap.writeback setting from parent cg too
scripts: fix gfp-translate after ___GFP_*_BITS conversion to an enum
Revert "mm: skip CMA pages when they are not available"
maple_tree: remove rcu_read_lock() from mt_validate()
kexec_file: fix elfcorehdr digest exclusion when CONFIG_CRASH_HOTPLUG=y
mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook
nilfs2: fix state management in error path of log writing function
nilfs2: fix missing cleanup on rollforward recovery error
nilfs2: protect references to superblock parameters exposed in sysfs
userfaultfd: don't BUG_ON() if khugepaged yanks our page table
userfaultfd: fix checks for huge PMDs
mm: vmalloc: ensure vmap_block is initialised before adding to queue
selftests: mm: fix build errors on armhf
|
|
As of today, KVM notes a quiescent state only in guest entry, which is good
as it avoids the guest being interrupted for current RCU operations.
While the guest vcpu runs, it can be interrupted by a timer IRQ that will
check for any RCU operations waiting for this CPU. In case there are any of
such, it invokes rcu_core() in order to sched-out the current thread and
note a quiescent state.
This occasional schedule work will introduce tens of microsseconds of
latency, which is really bad for vcpus running latency-sensitive
applications, such as real-time workloads.
So, note a quiescent state in guest exit, so the interrupted guests is able
to deal with any pending RCU operations before being required to invoke
rcu_core(), and thus avoid the overhead of related scheduler work.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240511020557.1198200-1-leobras@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.
scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault
(core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
${objs} ${wl}--no-whole-archive ${wl}--start-group
${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
Fixes: ed0f94102251 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
bio_integrity_add_page restricts the size of the integrity metadata to
queue_max_hw_sectors(q). This restriction is not needed because oversized
bios are split automatically. This restriction causes problems with
dm-integrity 'inline' mode - if we send a large bio to dm-integrity and
the bio's metadata are larger than queue_max_hw_sectors(q),
bio_integrity_add_page fails and the bio is ended with BLK_STS_RESOURCE
error.
An example that triggers it:
dd: error writing '/dev/mapper/in2': Cannot allocate memory
1+0 records in
0+0 records out
0 bytes copied, 0.00169291 s, 0.0 kB/s
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fb0987682c62 ("dm-integrity: introduce the Inline mode")
Fixes: 0ece1d649b6d ("bio-integrity: create multi-page bvecs in bio_integrity_add_page()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/e41b3b8e-16c2-70cb-97cb-881234bb200d@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-and-tested-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UvLiS+bhNXV-h2icwX1dyybbYHeQUuH7RYqUvMQf6N3w@mail.gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240904031348.4139545-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The mute LED on this HP laptop uses ALC236 and requires a quirk to function. This patch enables the existing quirk for the device.
Signed-off-by: Maximilien Perreault <maximilienperreault@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240904031013.21220-1-maximilienperreault@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led is controlled by ALC245. This patch enables the already
existing quirk for this device.
Signed-off-by: Adam Queler <queler+k@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903202419.31433-1-queler+k@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.
? page_fault_oops+0x136/0x2b0
? page_counter_cancel+0x2e/0x80
? do_user_addr_fault+0x2f2/0x640
? refill_obj_stock+0xc4/0x110
? exc_page_fault+0x71/0x160
? asm_exc_page_fault+0x27/0x30
? __mmdrop+0x10/0x180
? __mmdrop+0xec/0x180
? hrtimer_active+0xd/0x50
hrtimer_try_to_cancel+0x2c/0xf0
hrtimer_cancel+0x15/0x30
napi_disable+0x65/0x90
mana_destroy_rxq+0x4c/0x2f0
mana_create_rxq.isra.0+0x56c/0x6d0
? mana_uncfg_vport+0x50/0x50
mana_alloc_queues+0x21b/0x320
? skb_dequeue+0x5f/0x80
Cc: stable@vger.kernel.org
Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ARCH=arm build fails with:
CC [M] drivers/gpu/drm/bridge/ti-tdp158.o
../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_enable’:
../drivers/gpu/drm/bridge/ti-tdp158.c:31:9: error: implicit declaration of function ‘gpiod_set_value_cansleep’ [-Werror=implicit-function-declaration]
31 | gpiod_set_value_cansleep(tdp158->enable, 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_probe’:
../drivers/gpu/drm/bridge/ti-tdp158.c:80:26: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_regulator_get_optional’? [-Werror=implicit-function-declaration]
80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~~~~~~~~~~~
| devm_regulator_get_optional
../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function)
80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~
../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: note: each undeclared identifier is reported only once for each function it appears in
Add the proper gpio consumer #include to fix this, and juggle the
include order to be a bit more pleasant on the eye while at it.
Fixes: a15710027afb ("drm/bridge: add support for TI TDP158")
Cc: Marc Gonzalez <mgonzalez@freebox.fr>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904085206.3331553-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clang build with CONFIG_DRM_DEBUG_MM=n, CONFIG_WERROR=y, and W=1 leads to:
CC [M] drivers/gpu/drm/drm_mm.o
../drivers/gpu/drm/drm_mm.c:614:20: error: function 'drm_mm_node_scanned_block' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static inline bool drm_mm_node_scanned_block(const struct drm_mm_node *node)
^
Fix this by annotating drm_mm_node_scanned_block() with __maybe_unused.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903173437.3212437-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The INTERVAL_TREE_DEFINE() uncoditionally provides a bunch of helper
functions which in some cases may be not used. This, in particular,
prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../drm/drm_mm.c:152:1: error: unused function 'drm_mm_interval_tree_insert' [-Werror,-Wunused-function]
152 | INTERVAL_TREE_DEFINE(struct drm_mm_node, rb,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
153 | u64, __subtree_last,
| ~~~~~~~~~~~~~~~~~~~~
154 | START, LAST, static inline, drm_mm_interval_tree)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking drm_mm_interval_tree*() functions with __maybe_unused.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 202b52b7fbf7 ("drm: Track drm_mm nodes with an interval tree")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829154640.1120050-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
The functional change is that the CEC physical address gets invalidated
when the EDID could not be read.
v2:
- display info usage was split to a separate patch
- check drm_edid_connector_update() return value
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be15dce66a5373a7aed797a4ef63b0ba90b231e9.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
xe_bo_move() might be called in the TTM swapout path from validation
by another TTM device. If so, we are not likely to have a RPM
reference. So iff xe_pm_runtime_get() is safe to call from reclaim,
use it instead of xe_pm_runtime_get_noresume().
Strictly this is currently needed only if handle_system_ccs is true,
but use xe_pm_runtime_get() if possible anyway to increase test
coverage.
At the same time warn if handle_system_ccs is true and we can't
call xe_pm_runtime_get() from reclaim context. This will likely trip
if someone tries to enable SRIOV on LNL, without fixing Xe SRIOV
runtime resume / suspend.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903094232.166342-1-thomas.hellstrom@linux.intel.com
|
|
Look up display dimensions from display_info instead of the EDID
directly. This will be helpful for the follow-up work.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a6fd6de1853dbc337c5c26c65268604d3e91fe2.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Create a sentinal value for "invalid device".
This is needed for removing devices that have stripes on them (force
removing, without evacuating); we need a sentinal value for the stripe
pointers to the device being removed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we trigger the bus rescan from sysfs, we'll try to lock the PCI rescan
mutex recursively and deadlock - the platform device will be populated and
probed on the same thread that handles the sysfs write.
Add a workqueue to the pwrctl code on which we schedule the rescan for
controlled PCI devices. While at it: add a new interface for initializing
the pwrctl context where we'd now assign the parent device address and
initialize the workqueue.
Link: https://lore.kernel.org/r/20240823093323.33450-3-brgl@bgdev.pl
Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
of_platform_depopulate() doesn't play nicely with reused OF nodes - it
ignores the ones that are not marked explicitly as populated and it may
happen that the PCI device goes away before the platform device in which
case the PCI core clears the OF_POPULATED bit.
Unconditionally unregister the platform devices for child nodes when
stopping the PCI device.
Link: https://lore.kernel.org/r/20240823093323.33450-2-brgl@bgdev.pl
Fixes: 8fb18619d910 ("PCI/pwrctl: Create platform devices for child OF nodes of the port node")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The rk3576 SoC has an ARM Mali G52 MC3 GPU, that is compatible with
arm,mali-bifrost.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903152308.13565-6-detlev.casanova@collabora.com
|
|
Move away from corporate infrastructure for upstream work. Also update
mailmap.
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20240903200956.68231-1-a.hindborg@kernel.org
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
A recent change started parking the RCG at an always on parent during
registration, something which specifically breaks handover from an early
serial console.
Quoting Stephen Boyd who fixed this issue for SM8550 [1]:
The QUPs aren't shared in a way that requires parking the RCG at
an always on parent in case some other entity turns on the clk.
The hardware is capable of setting a new frequency itself with
the DFS mode, so parking is unnecessary. Furthermore, there
aren't any GDSCs for these devices, so there isn't a possibility
of the GDSC turning on the clks for housekeeping purposes.
This wasn't a problem to mark these clks shared until we started
parking shared RCGs at clk registration time in commit
01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration").
Parking at init is actually harmful to the UART when earlycon is
used. If the device is pumping out data while the frequency
changes you'll see garbage on the serial console until the
driver can probe and actually set a proper frequency.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Link: https://lore.kernel.org/all/20240819233628.2074654-2-swboyd@chromium.org/ [1]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240902070830.8535-1-johan+linaro@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix EIO if splice and page stealing are enabled on the fuse device
- Disable problematic combination of passthrough and writeback-cache
- Other bug fixes found by code review
* tag 'fuse-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: disable the combination of passthrough and writeback cache
fuse: update stats for pages in dropped aux writeback list
fuse: clear PG_uptodate when using a stolen page
fuse: fix memory leak in fuse_create_open
fuse: check aborted connection before adding requests to pending list for resending
fuse: use unsigned type for getxattr/listxattr size truncation
|
|
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is
false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but
becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called.
This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving
an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`.
Scenario shown as below:
`process A` `process B`
----------- ------------
BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN
enable CGROUP_GETSOCKOPT
BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT)
To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and
directly uses `copy_from_sockptr` to ensure that `max_optlen` is always
set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Co-developed-by: Yanghui Li <yanghui.li@mediatek.com>
Signed-off-by: Yanghui Li <yanghui.li@mediatek.com>
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240830082518.23243-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_DQL is not enabled, dql_group should be treated as a dead
declaration. However, its current extern declaration assumes the linker
will ignore it, which is generally true across most compiler and
architecture combinations.
But in certain cases, the linker still attempts to resolve the extern
struct, even when the associated code is dead, resulting in a linking
error. For instance the following error in loongarch64:
>> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group'
Modify the declaration of the dead object to be an empty declaration
instead of an extern. This change will prevent the linker from
attempting to resolve an undefined reference.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409012047.eCaOdfQJ-lkp@intel.com/
Fixes: 74293ea1c4db ("net: sysfs: Do not create sysfs for non BQL device")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240902101734.3260455-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Fixes: 50612537e9ab ("netem: fix classful handling")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.
Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is part of an effort [1] to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
[1] https://lore.kernel.org/netdev/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org/
It seems that net-cw1200.h is part of the CW1200 WLAN driver and
this it is appropriate to add it to the section for that driver.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240902-wifi-mnt-v2-1-f5ad1f36e993@kernel.org
|
|
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.
This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.
Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.
The following C program triggers the issue:
$ cat repro.c
/* Get the O_DIRECT definition. */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <pthread.h>
static int fd;
static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
{
while (count > 0) {
ssize_t ret;
ret = pwrite(fd, buf, count, offset);
if (ret < 0) {
if (errno == EINTR)
continue;
return ret;
}
count -= ret;
buf += ret;
}
return 0;
}
static void *fsync_loop(void *arg)
{
while (1) {
int ret;
ret = fsync(fd);
if (ret != 0) {
perror("Fsync failed");
exit(6);
}
}
}
int main(int argc, char *argv[])
{
long pagesize;
void *write_buf;
pthread_t fsyncer;
int ret;
if (argc != 2) {
fprintf(stderr, "Use: %s <file path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
if (fd == -1) {
perror("Failed to open/create file");
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1) {
perror("Failed to get page size");
return 2;
}
ret = posix_memalign(&write_buf, pagesize, pagesize);
if (ret) {
perror("Failed to allocate buffer");
return 3;
}
ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
if (ret != 0) {
fprintf(stderr, "Failed to create writer thread: %d\n", ret);
return 4;
}
while (1) {
ret = do_write(fd, write_buf, pagesize, 0);
if (ret != 0) {
perror("Write failed");
exit(5);
}
}
return 0;
}
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ timeout 10 ./repro /mnt/sdi/foo
Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.
Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Also fix a few places in gpu docs that are still relevant, and add a
bunch of .mailmap entries.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
|
|
The Cable PD Revision field in GET_CABLE_PROPERTY was
introduced in UCSI v2.1, so adding check for that.
The cable properties are also not used anywhere after the
cable is registered, so removing the cable_prop member
from struct ucsi_connector while at it.
Fixes: 38ca416597b0 ("usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240903130945.3395291-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
nsid values of 0xFFFFFFFE and 0XFFFFFFFF should be rejected with
a status code of "Invalid Namespace or Format".
See NVMe Base Specification, Active Namespace ID list (CNS 02h).
Fixes: a07b4970f464 ("nvmet: add a generic NVMe target")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The new stricter limits validation doesn't like a max_append_sectors value
to be set without BLK_FEAT_ZONED. Set it before allocation the disk to
fix this instead of just inheriting it later.
Fixes: d690cb8ae14b ("block: add an API to atomically update queue limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.11-rc7
We have three patch which address two issues in the ath11k driver
which should be addressed for 6.11-rc7:
One patch fixes a NULL pointer dereference while parsing transmit
power envelope (TPE) information, and the other two patches revert the
hibernation support since it is interfering with suspend on some
platforms. Note the cause of the suspend wakeups is still being
investigated, and it is hoped this can be addressed and hibernation
support can be restored in the near future.
|
|
Fix circular locking dependency on runtime suspend.
<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.
The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c89 ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fixes this missed case:
xe 0000:00:02.0: [drm] Missing outer runtime PM protection
WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __warn+0x94/0x1b0
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
? report_bug+0x1b7/0x1d0
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
xe_device_declare_wedged+0x91/0x280 [xe]
gt_reset_worker+0xa2/0x250 [xe]
v2: Also move get and get the right Fixes tag (Himal, Brost)
Fixes: fb74b205cdd2 ("drm/xe: Introduce a simple wedged state")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
After XDP configuration is completed, we bring the interface up
unconditionally, regardless of its state before the call to .ndo_bpf().
Preserve the information whether the interface had to be brought down and
later bring it up only in such case.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The mic in those laptops suffers too high gain resulting in mostly (fan
or else) noise being recorded. In addition to the existing fixup about
mic detection, apply also limiting its boost. While at it, extend the
quirk to also V5[46]0TNE models, which have the same issue.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903124939.6213-1-marmarek@invisiblethingslab.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Locking used in ice_qp_ena() and ice_qp_dis() does pretty much nothing,
because ICE_CFG_BUSY is a state flag that is supposed to be set in a PF
state, not VSI one. Therefore it does not protect the queue pair from
e.g. reset.
Remove ICE_CFG_BUSY locking from ice_qp_dis() and ice_qp_ena().
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Consider the following scenario:
.ndo_bpf() | ice_prepare_for_reset() |
________________________|_______________________________________|
rtnl_lock() | |
ice_down() | |
| test_bit(ICE_VSI_DOWN) - true |
| ice_dis_vsi() returns |
ice_up() | |
| proceeds to rebuild a running VSI |
.ndo_bpf() is not the only rtnl-locked callback that toggles the interface
to apply new configuration. Another example is .set_channels().
To avoid the race condition above, act only after reading ICE_VSI_DOWN
under rtnl_lock.
Fixes: 0f9d5027a749 ("ice: Refactor VSI allocation, deletion and rebuild flow")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If VSI rebuild is pending, .ndo_bpf() can attach/detach the XDP program on
VSI without applying new ring configuration. When unconfiguring the VSI, we
can encounter the state in which there is an XDP program but no XDP rings
to destroy or there will be XDP rings that need to be destroyed, but no XDP
program to indicate their presence.
When unconfiguring, rely on the presence of XDP rings rather then XDP
program, as they better represent the current state that has to be
destroyed.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The main threat to data consistency in ice_xdp() is a possible asynchronous
PF reset. It can be triggered by a user or by TX timeout handler.
XDP setup and PF reset code access the same resources in the following
sections:
* ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked
* ice_vsi_rebuild() for the PF VSI - not protected
* ice_vsi_open() - already rtnl-locked
With an unfortunate timing, such accesses can result in a crash such as the
one below:
[ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14
[ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18
[Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms
[ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001
[ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14
[ +0.394718] ice 0000:b1:00.0: PTP reset successful
[ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ +0.000045] #PF: supervisor read access in kernel mode
[ +0.000023] #PF: error_code(0x0000) - not-present page
[ +0.000023] PGD 0 P4D 0
[ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1
[ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[ +0.000036] Workqueue: ice ice_service_task [ice]
[ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice]
[...]
[ +0.000013] Call Trace:
[ +0.000016] <TASK>
[ +0.000014] ? __die+0x1f/0x70
[ +0.000029] ? page_fault_oops+0x171/0x4f0
[ +0.000029] ? schedule+0x3b/0xd0
[ +0.000027] ? exc_page_fault+0x7b/0x180
[ +0.000022] ? asm_exc_page_fault+0x22/0x30
[ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice]
[ +0.000194] ice_free_tx_ring+0xe/0x60 [ice]
[ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice]
[ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice]
[ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice]
[ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice]
[ +0.000145] ice_rebuild+0x18c/0x840 [ice]
[ +0.000145] ? delay_tsc+0x4a/0xc0
[ +0.000022] ? delay_tsc+0x92/0xc0
[ +0.000020] ice_do_reset+0x140/0x180 [ice]
[ +0.000886] ice_service_task+0x404/0x1030 [ice]
[ +0.000824] process_one_work+0x171/0x340
[ +0.000685] worker_thread+0x277/0x3a0
[ +0.000675] ? preempt_count_add+0x6a/0xa0
[ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50
[ +0.000679] ? __pfx_worker_thread+0x10/0x10
[ +0.000653] kthread+0xf0/0x120
[ +0.000635] ? __pfx_kthread+0x10/0x10
[ +0.000616] ret_from_fork+0x2d/0x50
[ +0.000612] ? __pfx_kthread+0x10/0x10
[ +0.000604] ret_from_fork_asm+0x1b/0x30
[ +0.000604] </TASK>
The previous way of handling this through returning -EBUSY is not viable,
particularly when destroying AF_XDP socket, because the kernel proceeds
with removal anyway.
There is plenty of code between those calls and there is no need to create
a large critical section that covers all of them, same as there is no need
to protect ice_vsi_rebuild() with rtnl_lock().
Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp().
Leaving unprotected sections in between would result in two states that
have to be considered:
1. when the VSI is closed, but not yet rebuild
2. when VSI is already rebuild, but not yet open
The latter case is actually already handled through !netif_running() case,
we just need to adjust flag checking a little. The former one is not as
trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of
hardware interaction happens, this can make adding/deleting rings exit
with an error. Luckily, VSI rebuild is pending and can apply new
configuration for us in a managed fashion.
Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to
indicate that ice_xdp() can just hot-swap the program.
Also, as ice_vsi_rebuild() flow is touched in this patch, make it more
consistent by deconfiguring VSI when coalesce allocation fails.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|