summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-05tools/net/ynl: fix cli.py --subscribe featureArkadiusz Kubalewski
Execution of command: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml / --subscribe "monitor" --sleep 10 fails with: File "/repo/./tools/net/ynl/cli.py", line 109, in main ynl.check_ntf() File "/repo/tools/net/ynl/lib/ynl.py", line 924, in check_ntf op = self.rsp_by_value[nl_msg.cmd()] KeyError: 19 Parsing Generic Netlink notification messages performs lookup for op in the message. The message was not yet decoded, and is not yet considered GenlMsg, thus msg.cmd() returns Generic Netlink family id (19) instead of proper notification command id (i.e.: DPLL_CMD_PIN_CHANGE_NTF=13). Allow the op to be obtained within NetlinkProtocol.decode(..) itself if the op was not passed to the decode function, thus allow parsing of Generic Netlink notifications without causing the failure. Suggested-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/netdev/m2le0n5xpn.fsf@gmail.com/ Fixes: 0a966d606c68 ("tools/net/ynl: Fix extack decoding for directional ops") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240904135034.316033-1-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05MAINTAINERS: fix ptp ocp driver maintainers addressVadim Fedorenko
While checking the latest series for ptp_ocp driver I realised that MAINTAINERS file has wrong item about email on linux.dev domain. Fixes: 795fd9342c62 ("ptp_ocp: adjust MAINTAINERS and mailmap") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240904131855.559078-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05selftests: net: enable bind testsJamie Bainbridge
bind_wildcard is compiled but not run, bind_timewait is not compiled. These two tests complete in a very short time, use the test harness properly, and seem reasonable to enable. The author of the tests confirmed via email that these were intended to be run. Enable these two tests. Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Fixes: 2c042e8e54ef ("tcp: Add selftest for bind() and TIME_WAIT.") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/5a009b26cf5fb1ad1512d89c61b37e2fac702323.1725430322.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-05kunit: Fix missing kerneldoc commentDavid Gow
Add a missing kerneldoc comment for the 'test' test context parameter, fixing the following warning: include/kunit/test.h:492: warning: Function parameter or struct member 'test' not described in 'kunit_kfree_const' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/lkml/20240827160631.67e121ed@canb.auug.org.au/ Fixes: f2c6dbd22017 ("kunit: Device wrappers should also manage driver name") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-05drm/i915: Remove extra unlikely helperHongbo Li
In IS_ERR, the unlikely is used for the input parameter, so these is no need to use it again outside. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240831094655.4153520-1-lihongbo22@huawei.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-05Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"Alex Deucher
This reverts commit 8f614469de248a4bc55fb07e55d5f4c340c75b11. This breaks some manual setting of the profile mode in certain cases. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3600 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 7a199557643e993d4e7357860624b8aa5d8f4340) Cc: stable@vger.kernel.org
2024-09-05Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"Alex Deucher
This reverts commit bbb05f8a9cd87f5046d05a0c596fddfb714ee457. This breaks some manual setting of the profile mode in certain cases. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3600 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-05MAINTAINERS: SPI: Add mailing list imx@lists.linux.dev for nxp spi driversFrank Li
Add mailing list imx@lists.linux.dev for nxp spi drivers(qspi, fspi and dspi). Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905155230.1901787-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05MAINTAINERS: SPI: Add freescale lpspi maintainer informationFrank Li
Add imx@lists.linux.dev and NXP maintainer information for lpspi driver (drivers/spi/spi-fsl-lpspi.c). Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905154124.1901311-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05Merge tag 'platform-drivers-x86-v6.11-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - amd/pmf: ASUS GA403 quirk matching tweak - dell-smbios: Fix to the init function rollback path * tag 'platform-drivers-x86-v6.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/amd: pmf: Make ASUS GA403 quirk generic platform/x86: dell-smbios: Fix error path in dell_smbios_init()
2024-09-05Merge tag 'linux_kselftest-kunit-fixes-6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fix fromShuah Khan: "One single fix to a use-after-free bug resulting from kunit_driver_create() failing to copy the driver name leaving it on the stack or freeing it" * tag 'linux_kselftest-kunit-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Device wrappers should also manage driver name
2024-09-05KVM: Remove HIGH_RES_TIMERS dependencySteven Rostedt
Commit 92b5265d38f6a ("KVM: Depend on HIGH_RES_TIMERS") added a dependency to high resolution timers with the comment: KVM lapic timer and tsc deadline timer based on hrtimer, setting a leftmost node to rb tree and then do hrtimer reprogram. If hrtimer not configured as high resolution, hrtimer_enqueue_reprogram do nothing and then make kvm lapic timer and tsc deadline timer fail. That was back in 2012, where hrtimer_start_range_ns() would do the reprogramming with hrtimer_enqueue_reprogram(). But as that was a nop with high resolution timers disabled, this did not work. But a lot has changed in the last 12 years. For example, commit 49a2a07514a3a ("hrtimer: Kick lowres dynticks targets on timer enqueue") modifies __hrtimer_start_range_ns() to work with low res timers. There's been lots of other changes that make low res work. ChromeOS has tested this before as well, and it hasn't seen any issues with running KVM with high res timers disabled. There could be problems, especially at low HZ, for guests that do not support kvmclock and rely on precise delivery of periodic timers to keep their clock running. This can be the APIC timer (provided by the kernel), the RTC (provided by userspace), or the i8254 (choice of kernel/userspace). These guests are few and far between these days, and in the case of the APIC timer + Intel hosts we can use the preemption timer (which is TSC-based and has better latency _and_ accuracy). In KVM, only x86 is requiring CONFIG_HIGH_RES_TIMERS; perhaps a "depends on HIGH_RES_TIMERS || EXPERT" could be added to virt/kvm, or a pr_warn could be added to kvm_init if HIGH_RES_TIMERS are not enabled. But in general, it seems that there must be other code in the kernel (maybe sound/?) that is relying on having high-enough HZ or hrtimers but that's not documented anywhere. Whenever you disable it you probably need to know what you're doing and what your workload is; so the dependency is not particularly interesting, and we can just remove it. Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Message-ID: <20240821095127.45d17b19@gandalf.local.home> [Added the last two paragraphs to the commit message. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-09-05tracing/timerlat: Add interface_lock around clearing of kthread in ↵Steven Rostedt
stop_kthread() The timerlat interface will get and put the task that is part of the "kthread" field of the osn_var to keep it around until all references are released. But here's a race in the "stop_kthread()" code that will call put_task_struct() on the kthread if it is not a kernel thread. This can race with the releasing of the references to that task struct and the put_task_struct() can be called twice when it should have been called just once. Take the interface_lock() in stop_kthread() to synchronize this change. But to do so, the function stop_per_cpu_kthreads() needs to change the loop from for_each_online_cpu() to for_each_possible_cpu() and remove the cpu_read_lock(), as the interface_lock can not be taken while the cpu locks are held. The only side effect of this change is that it may do some extra work, as the per_cpu variables of the offline CPUs would not be set anyway, and would simply be skipped in the loop. Remove unneeded "return;" in stop_kthread(). Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Tomas Glozar <tglozar@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240905113359.2b934242@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing/timerlat: Only clear timer if a kthread existsSteven Rostedt
The timerlat tracer can use user space threads to check for osnoise and timer latency. If the program using this is killed via a SIGTERM, the threads are shutdown one at a time and another tracing instance can start up resetting the threads before they are fully closed. That causes the hrtimer assigned to the kthread to be shutdown and freed twice when the dying thread finally closes the file descriptors, causing a use-after-free bug. Only cancel the hrtimer if the associated thread is still around. Also add the interface_lock around the resetting of the tlat_var->kthread. Note, this is just a quick fix that can be backported to stable. A real fix is to have a better synchronization between the shutdown of old threads and the starting of new ones. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240905085330.45985730@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing/osnoise: Use a cpumask to know what threads are kthreadsSteven Rostedt
The start_kthread() and stop_thread() code was not always called with the interface_lock held. This means that the kthread variable could be unexpectedly changed causing the kthread_stop() to be called on it when it should not have been, leading to: while true; do rtla timerlat top -u -q & PID=$!; sleep 5; kill -INT $PID; sleep 0.001; kill -TERM $PID; wait $PID; done Causing the following OOPS: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 5 UID: 0 PID: 885 Comm: timerlatu/5 Not tainted 6.11.0-rc4-test-00002-gbc754cc76d1b-dirty #125 a533010b71dab205ad2f507188ce8c82203b0254 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:hrtimer_active+0x58/0x300 Code: 48 c1 ee 03 41 54 48 01 d1 48 01 d6 55 53 48 83 ec 20 80 39 00 0f 85 30 02 00 00 49 8b 6f 30 4c 8d 75 10 4c 89 f0 48 c1 e8 03 <0f> b6 3c 10 4c 89 f0 83 e0 07 83 c0 03 40 38 f8 7c 09 40 84 ff 0f RSP: 0018:ffff88811d97f940 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88823c6b5b28 RCX: ffffed10478d6b6b RDX: dffffc0000000000 RSI: ffffed10478d6b6c RDI: ffff88823c6b5b28 RBP: 0000000000000000 R08: ffff88823c6b5b58 R09: ffff88823c6b5b60 R10: ffff88811d97f957 R11: 0000000000000010 R12: 00000000000a801d R13: ffff88810d8b35d8 R14: 0000000000000010 R15: ffff88823c6b5b28 FS: 0000000000000000(0000) GS:ffff88823c680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561858ad7258 CR3: 000000007729e001 CR4: 0000000000170ef0 Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x154/0x230 ? asm_exc_general_protection+0x26/0x30 ? hrtimer_active+0x58/0x300 ? __pfx_mutex_lock+0x10/0x10 ? __pfx_locks_remove_file+0x10/0x10 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x8e/0x1f0 ? security_file_release+0x43/0x80 __fput+0x372/0xb10 task_work_run+0x11e/0x1f0 ? _raw_spin_lock+0x85/0xe0 ? __pfx_task_work_run+0x10/0x10 ? poison_slab_object+0x109/0x170 ? do_exit+0x7a0/0x24b0 do_exit+0x7bd/0x24b0 ? __pfx_migrate_enable+0x10/0x10 ? __pfx_do_exit+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x64/0x140 ? _raw_spin_lock_irq+0x86/0xe0 do_group_exit+0xb0/0x220 get_signal+0x17ba/0x1b50 ? vfs_read+0x179/0xa40 ? timerlat_fd_read+0x30b/0x9d0 ? __pfx_get_signal+0x10/0x10 ? __pfx_timerlat_fd_read+0x10/0x10 arch_do_signal_or_restart+0x8c/0x570 ? __pfx_arch_do_signal_or_restart+0x10/0x10 ? vfs_read+0x179/0xa40 ? ksys_read+0xfe/0x1d0 ? __pfx_ksys_read+0x10/0x10 syscall_exit_to_user_mode+0xbc/0x130 do_syscall_64+0x74/0x110 ? __pfx___rseq_handle_notify_resume+0x10/0x10 ? __pfx_ksys_read+0x10/0x10 ? fpregs_restore_userregs+0xdb/0x1e0 ? fpregs_restore_userregs+0xdb/0x1e0 ? syscall_exit_to_user_mode+0x116/0x130 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 ? do_syscall_64+0x74/0x110 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7ff0070eca9c Code: Unable to access opcode bytes at 0x7ff0070eca72. RSP: 002b:00007ff006dff8c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000005 RCX: 00007ff0070eca9c RDX: 0000000000000400 RSI: 00007ff006dff9a0 RDI: 0000000000000003 RBP: 00007ff006dffde0 R08: 0000000000000000 R09: 00007ff000000ba0 R10: 00007ff007004b08 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ff006dff9a0 R14: 0000000000000007 R15: 0000000000000008 </TASK> Modules linked in: snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hwdep snd_hda_core ---[ end trace 0000000000000000 ]--- This is because it would mistakenly call kthread_stop() on a user space thread making it "exit" before it actually exits. Since kthreads are created based on global behavior, use a cpumask to know when kthreads are running and that they need to be shutdown before proceeding to do new work. Link: https://lore.kernel.org/all/20240820130001.124768-1-tglozar@redhat.com/ This was debugged by using the persistent ring buffer: Link: https://lore.kernel.org/all/20240823013902.135036960@goodmis.org/ Note, locking was originally used to fix this, but that proved to cause too many deadlocks to work around: https://lore.kernel.org/linux-trace-kernel/20240823102816.5e55753b@gandalf.local.home/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Link: https://lore.kernel.org/20240904103428.08efdf4c@gandalf.local.home Fixes: e88ed227f639e ("tracing/timerlat: Add user-space interface") Reported-by: Tomas Glozar <tglozar@redhat.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05Merge tag 'nvme-6.11-2024-09-05' of git://git.infradead.org/nvme into block-6.11Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.11 - Sparse fix on static symbol (Jinjie) - Misleading warning message fix (Keith) - TCP command allocation handling fix (Maurizio) - PCI tagset allocation handling fix (Keith) - Low-power quirk for Samsung (Georg) - Queue limits fix for zone devices (Christoph) - Target protocol behavior fix (Maurizio)" * tag 'nvme-6.11-2024-09-05' of git://git.infradead.org/nvme: nvmet: Identify-Active Namespace ID List command should reject invalid nsid nvme: set BLK_FEAT_ZONED for ZNS multipath disks nvme-pci: Add sleep quirk for Samsung 990 Evo nvme-pci: allocate tagset on reset if necessary nvmet-tcp: fix kernel crash if commands allocation fails nvme: use better description for async reset reason nvmet: Make nvmet_debugfs static
2024-09-05ALSA: hda/realtek - Fix inactive headset mic jack for ASUS Vivobook 15 X1504VAPVasiliy Kovalev
When the headset is connected, there is no automatic switching of the capture source - you can only manually select the headset microphone in pavucontrol. This patch fixes/activates the inactive microphone of the headset. Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Cc: <stable@vger.kernel.org> Link: https://patch.msgid.link/20240905140211.937385-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-09-05eventfs: Use list_del_rcu() for SRCU protected list variableSteven Rostedt
Chi Zhiling reported: We found a null pointer accessing in tracefs[1], the reason is that the variable 'ei_child' is set to LIST_POISON1, that means the list was removed in eventfs_remove_rec. so when access the ei_child->is_freed, the panic triggered. by the way, the following script can reproduce this panic loop1 (){ while true do echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events echo "" > /sys/kernel/debug/tracing/kprobe_events done } loop2 (){ while true do tree /sys/kernel/debug/tracing/events/kprobes/ done } loop1 & loop2 [1]: [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150 [ 1147.968239][T17331] Mem abort info: [ 1147.971739][T17331] ESR = 0x0000000096000004 [ 1147.976172][T17331] EC = 0x25: DABT (current EL), IL = 32 bits [ 1147.982171][T17331] SET = 0, FnV = 0 [ 1147.985906][T17331] EA = 0, S1PTW = 0 [ 1147.989734][T17331] FSC = 0x04: level 0 translation fault [ 1147.995292][T17331] Data abort info: [ 1147.998858][T17331] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1148.005023][T17331] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1148.010759][T17331] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls] [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G W ------- ---- 6.6.43 #2 [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650 [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020 [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398 [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398 [ 1148.115969][T17331] sp : ffff80008d56bbd0 [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000 [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100 [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10 [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000 [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0 [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0 [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862 [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068 [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001 [ 1148.198131][T17331] Call trace: [ 1148.201259][T17331] eventfs_iterate+0x2c0/0x398 [ 1148.205864][T17331] iterate_dir+0x98/0x188 [ 1148.210036][T17331] __arm64_sys_getdents64+0x78/0x160 [ 1148.215161][T17331] invoke_syscall+0x78/0x108 [ 1148.219593][T17331] el0_svc_common.constprop.0+0x48/0xf0 [ 1148.224977][T17331] do_el0_svc+0x24/0x38 [ 1148.228974][T17331] el0_svc+0x40/0x168 [ 1148.232798][T17331] el0t_64_sync_handler+0x120/0x130 [ 1148.237836][T17331] el0t_64_sync+0x1a4/0x1a8 [ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f9000676 (b9405300) [ 1148.248955][T17331] ---[ end trace 0000000000000000 ]--- The issue is that list_del() is used on an SRCU protected list variable before the synchronization occurs. This can poison the list pointers while there is a reader iterating the list. This is simply fixed by using list_del_rcu() that is specifically made for this purpose. Link: https://lore.kernel.org/linux-trace-kernel/20240829085025.3600021-1-chizhiling@163.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20240904131605.640d42b1@gandalf.local.home Fixes: 43aa6f97c2d03 ("eventfs: Get rid of dentry pointers without refcounts") Reported-by: Chi Zhiling <chizhiling@kylinos.cn> Tested-by: Chi Zhiling <chizhiling@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05tracing: Avoid possible softlockup in tracing_iter_reset()Zheng Yejian
In __tracing_open(), when max latency tracers took place on the cpu, the time start of its buffer would be updated, then event entries with timestamps being earlier than start of the buffer would be skipped (see tracing_iter_reset()). Softlockup will occur if the kernel is non-preemptible and too many entries were skipped in the loop that reset every cpu buffer, so add cond_resched() to avoid it. Cc: stable@vger.kernel.org Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces") Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-09-05arm64: stacktrace: fix the usage of ftrace_graph_ret_addr()Puranjay Mohan
ftrace_graph_ret_addr() takes an 'idx' integer pointer that is used to optimize the stack unwinding process. arm64 currently passes `NULL` for this parameter which stops it from utilizing these optimizations. Further, the current code for ftrace_graph_ret_addr() will just return the passed in return address if it is NULL which will break this usage. Pass a valid integer pointer to ftrace_graph_ret_addr() similar to x86_64's stack unwinder. Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Fixes: 29c1c24a2707 ("function_graph: Fix up ftrace_graph_ret_addr()") Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20240618162342.28275-1-puranjay@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-09-05spi: spi-fsl-lpspi: Fix off-by-one in prescale maxStefan Wahren
The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register") doesn't implement the prescaler maximum as intended. The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP it should be 7. So this needs also a adjustment of the comparison in the scldiv calculation. Fixes: 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-05Merge tag 'amd-pstate-v6.11-2024-09-04' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux Pull an amd-pstate fix for 6.11 from Mario Limonciello: "second round of amd-pstate fixes for 6.11: * Fix an incorrect warning emitted on processors that don't support X86_FEATURE_CPPC." * tag 'amd-pstate-v6.11-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: cpufreq/amd-pstate: Remove warning for X86_FEATURE_CPPC on certain Zen models
2024-09-05drm/tegra: fix potential uninitialized variable useJani Nikula
It's likely either output->drm_edid or output->ddc is non-NULL, but avoid the uninitialized variable usage anyway. Reported-by: kernel test robot <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/ZtXLyXxew7z6H2bD@stanley.mountain Fixes: 98365ca74cbf ("drm/tegra: convert to struct drm_edid") Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-tegra@vger.kernel.org Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240902161317.2437148-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 8e514bad271723473d31fcc496f7143ba49c43c5) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-09-05net: dsa: vsc73xx: fix possible subblocks range of CAPT blockPawel Dembicki
CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7. Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this moment. This patch fix it. Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240903203340.1518789-1-paweldembicki@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05sched: sch_cake: fix bulk flow accounting logic for host fairnessToke Høiland-Jørgensen
In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that. Fixes: 712639929912 ("sch_cake: Make the dual modes fairer") Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05pwm: stm32: Use the right CCxNP bit in stm32_pwm_enable()Uwe Kleine-König
The pwm devices for a pwm_chip are numbered starting at 0, the first hw channel however has the number 1. While introducing a parametrised macro to simplify register bit usage and making that offset explicit, one of the usages was converted wrongly. This is fixed here. Fixes: 7cea05ae1d4e ("pwm-stm32: Make use of parametrised register definitions") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240905090627.197536-2-u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
2024-09-05drm/fbdev-dma: Only install deferred I/O if necessaryThomas Zimmermann
Deferred I/O requires struct page for framebuffer memory, which is not guaranteed for all DMA ranges. We thus only install deferred I/O if we have a framebuffer that requires it. A reported bug affected the ipu-v3 and pl111 drivers, which have video memory in either Normal or HighMem zones [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000010000000-0x000000003fffffff] [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff] where deferred I/O only works correctly with HighMem. See the Closes tags for bug reports. v2: - test if screen_buffer supports deferred I/O (Sima) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 808a40b69468 ("drm/fbdev-dma: Implement damage handling and deferred I/O") Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Closes: https://lore.kernel.org/all/23636953.6Emhk5qWAg@steina-w/ Reported-by: Linus Walleij <linus.walleij@linaro.org> Closes: https://lore.kernel.org/dri-devel/CACRpkdb+hb9AGavbWpY-=uQQ0apY9en_tWJioPKf_fAbXMP4Hg@mail.gmail.com/ Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904123750.31206-1-tzimmermann@suse.de
2024-09-05docs: netdev: document guidance on cleanup.hJakub Kicinski
Document what was discussed multiple times on list and various virtual / in-person conversations. guard() being okay in functions <= 20 LoC is a bit of my own invention. If the function is trivial it should be fine, but feel free to disagree :) We'll obviously revisit this guidance as time passes and we and other subsystems get more experience. Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240830171443.3532077-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-05drm/panthor: flush FW AS caches in slow reset pathAdrián Larumbe
In the off-chance that waiting for the firmware to signal its booted status timed out in the fast reset path, one must flush the cache lines for the entire FW VM address space before reloading the regions, otherwise stale values eventually lead to a scheduler job timeout. Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block") Cc: stable@vger.kernel.org Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240902130237.3440720-1-adrian.larumbe@collabora.com
2024-09-05drm/msm: add another DRM_DISPLAY_DSC_HELPER selectionDmitry Baryshkov
In the drm/msm driver both DSI and DPU subdrivers use drm_dsc_* functions, but only DSI selects DRM_DISPLAY_DSC_HELPER symbol. Add missing select to the DPU subdriver too. Fixes: ca097d4d94d8 ("drm/display: split DSC helpers from DP helpers") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409040129.rqhtRTeC-lkp@intel.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240905-fix-dsc-helpers-v1-2-3ae4b5900f89@linaro.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-09-05drm/xe: select DRM_DISPLAY_DSC_HELPERDmitry Baryshkov
The Xe driver shares display code with the i915 driver, pulling in the dependency on the DSC helpers this way. However when working on separating DRM_DISPLAY_DSC_HELPER this was left unnoticed. Add missing dependency. Fixes: ca097d4d94d8 ("drm/display: split DSC helpers from DP helpers") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202409032226.x6f4SWQl-lkp@intel.com/ Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240905-fix-dsc-helpers-v1-1-3ae4b5900f89@linaro.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-09-05drm: panel: nv3052c: Correct WL-355608-A8 panel compatibleRyan Walklin
As per the previous dt-binding commit, update the WL-355608-A8 panel compatible to reflect the the integrating device vendor and name as the panel OEM is unknown. Fixes: 62ea2eeba7bf ("drm: panel: nv3052c: Add WL-355608-A8 panel") Signed-off-by: Ryan Walklin <ryan@testtoast.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-3-ryan@testtoast.com
2024-09-05dt-bindings: display: panel: Rename WL-355608-A8 panel to rg35xx-*-panelRyan Walklin
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown OEM used in a number of handheld gaming devices made by Anbernic. Previously committed using the OEM serial without a vendor prefix, however following subsequent discussion the preference is to use the integrating device vendor and name where the OEM is unknown. There are 4 RG35XX series devices from Anbernic based on an Allwinner H700 SoC using this panel, with the -Plus variant introduced first. Therefore the -Plus is used as the fallback for the subsequent -H, -2024, and -SP devices. Alter the filename and compatible string to reflect the convention. Fixes: 45b888a8980a ("dt-bindings: display: panel: Add WL-355608-A8 panel") Signed-off-by: Ryan Walklin <ryan@testtoast.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com
2024-09-05drm/panthor: Add DEV_QUERY_TIMESTAMP_INFO dev queryMary Guillemard
Expose timestamp information supported by the GPU with a new device query. Mali uses an external timer as GPU system time. On ARM, this is wired to the generic arch timer so we wire cntfrq_el0 as device frequency. This new uAPI will be used in Mesa to implement timestamp queries and VK_KHR_calibrated_timestamps. Since this extends the uAPI and because userland needs a way to advertise those features conditionally, this also bumps the driver minor version. v2: - Rewrote to use GPU timestamp register - Added timestamp_offset to drm_panthor_timestamp_info - Add missing include for arch_timer_get_cntfrq - Rework commit message v3: - Add panthor_gpu_read_64bit_counter - Change panthor_gpu_read_timestamp to use panthor_gpu_read_64bit_counter v4: - Fix multiple typos in uAPI documentation - Mention behavior when the timestamp frequency is unknown - Use u64 instead of unsigned long long for panthor_gpu_read_timestamp - Apply r-b from Mihail Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com> Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240830080349.24736-2-mary.guillemard@collabora.com
2024-09-05drm/panthor: Restrict high priorities on group_createMary Guillemard
We were allowing any users to create a high priority group without any permission checks. As a result, this was allowing possible denial of service. We now only allow the DRM master or users with the CAP_SYS_NICE capability to set higher priorities than PANTHOR_GROUP_PRIORITY_MEDIUM. As the sole user of that uAPI lives in Mesa and hardcode a value of MEDIUM [1], this should be safe to do. Additionally, as those checks are performed at the ioctl level, panthor_group_create now only check for priority level validity. [1]https://gitlab.freedesktop.org/mesa/mesa/-/blob/f390835074bdf162a63deb0311d1a6de527f9f89/src/gallium/drivers/panfrost/pan_csf.c#L1038 Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com> Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Cc: stable@vger.kernel.org Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240903144955.144278-2-mary.guillemard@collabora.com
2024-09-04Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== ice: fix synchronization between .ndo_bpf() and reset Larysa Zaremba says: PF reset can be triggered asynchronously, by tx_timeout or by a user. With some unfortunate timings both ice_vsi_rebuild() and .ndo_bpf will try to access and modify XDP rings at the same time, causing system crash. The first patch factors out rtnl-locked code from VSI rebuild code to avoid deadlock. The following changes lock rebuild and .ndo_bpf() critical sections with an internal mutex as well and provide complementary fixes. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: do not bring the VSI up, if it was down before the XDP setup ice: remove ICE_CFG_BUSY locking from AF_XDP code ice: check ICE_VSI_DOWN under rtnl_lock when preparing for reset ice: check for XDP rings instead of bpf program when unconfiguring ice: protect XDP configuration with a mutex ice: move netif_queue_set_napi to rtnl-protected sections ==================== Link: https://patch.msgid.link/20240903183034.3530411-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04Merge tag 'wireless-2024-09-04' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.11 Hopefully final fixes for v6.11 and this time only fixes to ath11k driver. We need to revert hibernation support due to reported regressions and we have a fix for kernel crash introduced in v6.11-rc1. * tag 'wireless-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: MAINTAINERS: wifi: cw1200: add net-cw1200.h Revert "wifi: ath11k: support hibernation" Revert "wifi: ath11k: restore country code during resume" wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power() ==================== Link: https://patch.msgid.link/20240904135906.5986EC4CECA@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04net: xilinx: axienet: Fix race in axienet_stopSean Anderson
axienet_dma_err_handler can race with axienet_stop in the following manner: CPU 1 CPU 2 ====================== ================== axienet_stop() napi_disable() axienet_dma_stop() axienet_dma_err_handler() napi_disable() axienet_dma_stop() axienet_dma_start() napi_enable() cancel_work_sync() free_irq() Fix this by setting a flag in axienet_stop telling axienet_dma_err_handler not to bother doing anything. I chose not to use disable_work_sync to allow for easier backporting. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04net: bridge: br_fdb_external_learn_add(): always set EXT_LEARNJonas Gorski
When userspace wants to take over a fdb entry by setting it as EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add(). If the bridge updates the entry later because its port changed, we clear the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER flag set. If userspace then wants to take over the entry again, br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the update. Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless if this was a user fdb entry or not. Fixes: 710ae7287737 ("net: bridge: Mark FDB entries that were added by user as such") Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04r8152: fix the firmware doesn't workHayes Wang
generic_ocp_write() asks the parameter "size" must be 4 bytes align. Therefore, write the bp would fail, if the mac->bp_num is odd. Align the size to 4 for fixing it. The way may write an extra bp, but the rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose index is more than mac->bp_num. That is, there is no influence for the firmware. Besides, I check the return value of generic_ocp_write() to make sure everything is correct. Fixes: e5c266a61186 ("r8152: set bp in bulk") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04fou: Fix null-ptr-deref in GRO.Kuniyuki Iwashima
We observed a null-ptr-deref in fou_gro_receive() while shutting down a host. [0] The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol in struct fou. When fou_release() is called due to netns dismantle or explicit tunnel teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data. Then, the tunnel socket is destroyed after a single RCU grace period. So, in-flight udp4_gro_receive() could find the socket and execute the FOU GRO handler, where sk->sk_user_data could be NULL. Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL checks in FOU GRO handlers. [0]: BUG: kernel NULL pointer dereference, address: 0000000000000008 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0 SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1 Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017 RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou] Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42 RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010 RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08 RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002 R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400 R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0 FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259) ? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) ? no_context (arch/x86/mm/fault.c:752) ? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483) ? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571) ? fou_gro_receive (net/ipv4/fou.c:233) [fou] udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559) udp4_gro_receive (net/ipv4/udp_offload.c:604) inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7)) dev_gro_receive (net/core/dev.c:6035 (discriminator 4)) napi_gro_receive (net/core/dev.c:6170) ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena] ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena] napi_poll (net/core/dev.c:6847) net_rx_action (net/core/dev.c:6917) __do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299) asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809) </IRQ> do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77) irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435) common_interrupt (arch/x86/kernel/irq.c:239) asm_common_interrupt (arch/x86/include/asm/idtentry.h:626) RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575) Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246 RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900 RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64 RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044 R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001 R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000 ? sched_clock_cpu (kernel/sched/clock.c:371) acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3)) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237) cpuidle_enter (drivers/cpuidle/cpuidle.c:353) cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239) do_idle (kernel/sched/idle.c:302) cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1)) start_kernel (init/main.c:1048) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310) Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel CR2: 0000000000000008 Fixes: d92283e338f6 ("fou: change to use UDP socket GRO") Reported-by: Alphonse Kurian <alkurian@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04bareudp: Fix device stats updates.Guillaume Nault
Bareudp devices update their stats concurrently. Therefore they need proper atomic increments. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-04Merge tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: - Fix a typo in the rebalance accounting changes - BCH_SB_MEMBER_INVALID: small on disk format feature which will be needed for full erasure coding support; this is only the minimum so that 6.11 can handle future versions without barfing. * tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefs: bcachefs: BCH_SB_MEMBER_INVALID bcachefs: fix rebalance accounting
2024-09-04Merge branch 'bpf-fix-incorrect-name-check-pass-logic-in-btf_name_valid_section'Alexei Starovoitov
Jeongjun Park says: ==================== bpf: fix incorrect name check pass logic in btf_name_valid_section This patch was written to fix an issue where btf_name_valid_section() would not properly check names with certain conditions and would throw an OOB vuln. And selftest was added to verify this patch. ==================== Link: https://lore.kernel.org/r/20240831054525.364353-1-aha310510@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-09-04selftests/bpf: Add a selftest to check for incorrect namesJeongjun Park
Add selftest for cases where btf_name_valid_section() does not properly check for certain types of names. Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Jeongjun Park <aha310510@gmail.com> Link: https://lore.kernel.org/r/20240831054742.364585-1-aha310510@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com>
2024-09-04drm/nouveau/volt: use clamp() in nvkm_volt_map()Li Zetao
When it needs to get a value within a certain interval, using clamp() makes the code easier to understand than min(max()). Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240831012803.3950100-4-lizetao1@huawei.com
2024-09-04drm/nouveau/tegra: Use iommu_paging_domain_alloc()Lu Baolu
In nvkm_device_tegra_probe_iommu(), a paging domain is allocated for @dev and attached to it on success. Use iommu_paging_domain_alloc() to make it explicit. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-2-baolu.lu@linux.intel.com
2024-09-04Merge tag 'perf-tools-fixes-for-v6.11-2024-09-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A number of small fixes for the late cycle: - Two more build fixes on 32-bit archs - Fixed a segfault during perf test - Fixed spinlock/rwlock accounting bug in perf lock contention" * tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf daemon: Fix the build on more 32-bit architectures perf python: include "util/sample.h" perf lock contention: Fix spinlock and rwlock accounting perf test pmu: Set uninitialized PMU alias to null
2024-09-04Merge tag 'hwmon-for-v6.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - hp-wmi-sensors: Check if WMI event data exists before accessing it - ltc2991: fix register bits defines * tag 'hwmon-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (hp-wmi-sensors) Check if WMI event data exists hwmon: ltc2991: fix register bits defines
2024-09-04bpf: add check for invalid name in btf_name_valid_section()Jeongjun Park
If the length of the name string is 1 and the value of name[0] is NULL byte, an OOB vulnerability occurs in btf_name_valid_section() and the return value is true, so the invalid name passes the check. To solve this, you need to check if the first position is NULL byte and if the first character is printable. Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Fixes: bd70a8fb7ca4 ("bpf: Allow all printable characters in BTF DATASEC names") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Link: https://lore.kernel.org/r/20240831054702.364455-1-aha310510@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 04:06:47 +0000