summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-18sfc: really check hash is valid before using itEdward Cree
Actually hook up the .rx_buf_hash_valid method in EF100's nic_type. Fixes: 068885434ccb ("sfc: check hash is valid before using it") Reported-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: Edward Cree <ecree@solarflare.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18macvlan: validate setting of multiple remote source MAC addressesAlvin Šipraga
Remote source MAC addresses can be set on a 'source mode' macvlan interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit tightens the validation of these MAC addresses to match the validation already performed when setting or adding a single MAC address via the IFLA_MACVLAN_MACADDR attribute. iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set' command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command, which demonstrates the inconsistent behaviour that this commit addresses: # ip link add link eth0 name macvlan0 type macvlan mode source # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00 RTNETLINK answers: Cannot assign requested address # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00 # ip -d link show macvlan0 5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ... link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0 macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ... With this change, the 'set' command will (rightly) fail in the same way as the 'add' command. Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18Merge tag 'fixes-2020-08-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull ia64 page table fix from Mike Rapoport: "Fix regression in IA-64 caused by page table allocation refactoring The refactoring and consolidation of <asm/pgalloc.h> caused regression on parisc and ia64. The fix for parisc made it into v5.9-rc1 while the fix ia64 got delayed a bit and here it is" * tag 'fixes-2020-08-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: arch/ia64: Restore arch-specific pgd_offset_k implementation
2020-08-18mm/memory.c: skip spurious TLB flush for retried page faultYang Shi
Recently we found regression when running will_it_scale/page_fault3 test on ARM64. Over 70% down for the multi processes cases and over 20% down for the multi threads cases. It turns out the regression is caused by commit 89b15332af7c ("mm: drop mmap_sem before calling balance_dirty_pages() in write fault"). The test mmaps a memory size file then write to the mapping, this would make all memory dirty and trigger dirty pages throttle, that upstream commit would release mmap_sem then retry the page fault. The retried page fault would see correct PTEs installed then just fall through to spurious TLB flush. The regression is caused by the excessive spurious TLB flush. It is fine on x86 since x86's spurious TLB flush is no-op. We could just skip the spurious TLB flush to mitigate the regression. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Xu Yu <xuyu@linux.alibaba.com> Debugged-by: Xu Yu <xuyu@linux.alibaba.com> Tested-by: Xu Yu <xuyu@linux.alibaba.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Yang Shi <shy828301@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-18ext4: change to use fallthrough macroShijie Luo
Change to use fallthrough macro in switch case. Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200810114435.24182-1-luoshijie1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18ext4: remove unused parameter of ext4_generic_delete_entry functionKyoungho Koo
The ext4_generic_delete_entry function does not use the parameter handle, so it can be removed. Signed-off-by: Kyoungho Koo <rnrudgh@gmail.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200810080701.GA14160@koo-Z370-HD3 Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18mballoc: replace seq_printf with seq_putsXu Wang
seq_puts is a lot cheaper than seq_printf, so use that to print literal strings. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200810022158.9167-1-vulab@iscas.ac.cn Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18ext4: optimize the implementation of ext4_mb_good_group()brookxu
It might be better to adjust the code in two places: 1. Determine whether grp is currupt or not should be placed first. 2. (cr<=2 && free <ac->ac_g_ex.fe_len)should may belong to the crx strategy, and it may be more appropriate to put it in the subsequent switch statement block. For cr1, cr2, the conditions in switch potentially realize the above judgment. For cr0, we should add (free <ac->ac_g_ex.fe_len) judgment, and then delete (free / fragments) >= ac->ac_g_ex.fe_len), because cr0 returns true by default. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/e20b2d8f-1154-adb7-3831-a9e11ba842e9@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18ext4: delete invalid comments near ext4_mb_check_limits()brookxu
These comments do not seem to be related to ext4_mb_check_limits(), it may be invalid. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/c49faf0c-d5d5-9c51-6911-9e0ff57c6bfa@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18ext4: fix typos in ext4_mb_regular_allocator() commentbrookxu
Fix typos in ext4_mb_regular_allocator() comment Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/d6514145-73b3-808b-ec5a-a8be27c51f9c@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-18libbpf: Fix build on ppc64le architectureAndrii Nakryiko
On ppc64le we get the following warning: In file included from btf_dump.c:16:0: btf_dump.c: In function ‘btf_dump_emit_struct_def’: ../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror] (void) (&_max1 == &_max2); \ ^ btf_dump.c:882:11: note: in expansion of macro ‘max’ m_sz = max(0LL, btf__resolve_size(d->btf, m->type)); ^~~ Fix by explicitly casting to __s64, which is a return type from btf__resolve_size(). Fixes: 702eddc77a90 ("libbpf: Handle GCC built-in types for Arm NEON") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com
2020-08-18dt-bindings: Use Shawn Guo's preferred e-mail for i.MX bindingsFabio Estevam
Use Shawn Guo's kernel.org address for the i.MX related bindings as per the MAINTAINERS entries. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200818111245.17047-1-festevam@gmail.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-08-18RDMA/usnic: Fix spelling mistake "transistion" -> "transition"Colin Ian King
There is a spelling mistake in a usnic_err error message. Fix it. Link: https://lore.kernel.org/r/20200805141459.23069-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/hns: Fix spelling mistake "epmty" -> "empty"Colin Ian King
There is a spelling mistake in a dev_dbg message. Fix it. Link: https://lore.kernel.org/r/20200805141111.22804-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18EDAC/{i7core,sb,pnd2,skx}: Fix error event severityTony Luck
IA32_MCG_STATUS.RIPV indicates whether the return RIP value pushed onto the stack as part of machine check delivery is valid or not. Various drivers copied a code fragment that uses the RIPV bit to determine the severity of the error as either HW_EVENT_ERR_UNCORRECTED or HW_EVENT_ERR_FATAL, but this check is reversed (marking errors where RIPV is set as "FATAL"). Reverse the tests so that the error is marked fatal when RIPV is not set. Reported-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200707194324.14884-1-tony.luck@intel.com
2020-08-18kconfig: qconf: remove unused colNrMasahiro Yamada
This is not used at all. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-18kconfig: qconf: fix the popup menu in the ConfigInfoView windowMasahiro Yamada
I do not know when ConfigInfoView::createStandardContextMenu() is called. Because QTextEdit::createStandardContextMenu() is not virtual, ConfigInfoView::createStandardContextMenu() cannot override it. Even if right-click the ConfigInfoView window, the "Show Debug Info" menu does not show up. Build up the menu in the constructor, and invoke it from the contextMenuEvent(). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-18kconfig: qconf: fix signal connection to invalid slotsMasahiro Yamada
If you right-click in the ConfigList window, you will see the following messages in the console: QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906 QObject::connect: (sender name: 'config') Right, there is no such slot in QAction. I think this is a typo of setChecked. Due to this bug, when you toggled the menu "Option->Show Name/Range/Data" the state of the context menu was not previously updated. Fix this. Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-18genksyms: keywords: Use __restrict not _restrictJoe Perches
Use the proper form of the RESTRICT keyword. Quote the comments properly too. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-18kbuild: remove redundant patterns in filter/filter-outMasahiro Yamada
The '%' in filter/filter-out matches to any number of any characters, including empty string. So, '%config' matches to 'config', and '%install' to 'install'. Drop the redundant patterns. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-18extract-cert: add static to local dataMasahiro Yamada
Fix the following warning from sparse: scripts/extract-cert.c:74:5: warning: symbol 'kbuild_verbose' was not declared. Should it be static? Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-08-18powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU deathMichael Roth
For a power9 KVM guest with XIVE enabled, running a test loop where we hotplug 384 vcpus and then unplug them, the following traces can be seen (generally within a few loops) either from the unplugged vcpu: cpu 65 (hwid 65) Ready to die... Querying DEAD? cpu 66 (66) shows 2 list_del corruption. next->prev should be c00a000002470208, but was c00a000002470048 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: fuse nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 ... CPU: 66 PID: 0 Comm: swapper/66 Kdump: loaded Not tainted 4.18.0-221.el8.ppc64le #1 NIP: c0000000007ab50c LR: c0000000007ab508 CTR: 00000000000003ac REGS: c0000009e5a17840 TRAP: 0700 Not tainted (4.18.0-221.el8.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000842 XER: 20040000 ... NIP __list_del_entry_valid+0xac/0x100 LR __list_del_entry_valid+0xa8/0x100 Call Trace: __list_del_entry_valid+0xa8/0x100 (unreliable) free_pcppages_bulk+0x1f8/0x940 free_unref_page+0xd0/0x100 xive_spapr_cleanup_queue+0x148/0x1b0 xive_teardown_cpu+0x1bc/0x240 pseries_mach_cpu_die+0x78/0x2f0 cpu_die+0x48/0x70 arch_cpu_idle_dead+0x20/0x40 do_idle+0x2f4/0x4c0 cpu_startup_entry+0x38/0x40 start_secondary+0x7bc/0x8f0 start_secondary_prolog+0x10/0x14 or on the worker thread handling the unplug: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 BUG: Bad page state in process kworker/u768:3 pfn:95de1 cpu 314 (hwid 314) Ready to die... page:c00a000002577840 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0x5ffffc00000000() raw: 005ffffc00000000 5deadbeef0000100 5deadbeef0000200 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: kvm xt_CHECKSUM ipt_MASQUERADE xt_conntrack ... CPU: 0 PID: 548 Comm: kworker/u768:3 Kdump: loaded Not tainted 4.18.0-224.el8.bz1856588.ppc64le #1 Workqueue: pseries hotplug workque pseries_hp_work_fn Call Trace: dump_stack+0xb0/0xf4 (unreliable) bad_page+0x12c/0x1b0 free_pcppages_bulk+0x5bc/0x940 page_alloc_cpu_dead+0x118/0x120 cpuhp_invoke_callback.constprop.5+0xb8/0x760 _cpu_down+0x188/0x340 cpu_down+0x5c/0xa0 cpu_subsys_offline+0x24/0x40 device_offline+0xf0/0x130 dlpar_offline_cpu+0x1c4/0x2a0 dlpar_cpu_remove+0xb8/0x190 dlpar_cpu_remove_by_index+0x12c/0x150 dlpar_cpu+0x94/0x800 pseries_hp_work_fn+0x128/0x1e0 process_one_work+0x304/0x5d0 worker_thread+0xcc/0x7a0 kthread+0x1ac/0x1c0 ret_from_kernel_thread+0x5c/0x80 The latter trace is due to the following sequence: page_alloc_cpu_dead drain_pages drain_pages_zone free_pcppages_bulk where drain_pages() in this case is called under the assumption that the unplugged cpu is no longer executing. To ensure that is the case, and early call is made to __cpu_die()->pseries_cpu_die(), which runs a loop that waits for the cpu to reach a halted state by polling its status via query-cpu-stopped-state RTAS calls. It only polls for 25 iterations before giving up, however, and in the trace above this results in the following being printed only .1 seconds after the hotplug worker thread begins processing the unplug request: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 At that point the worker thread assumes the unplugged CPU is in some unknown/dead state and procedes with the cleanup, causing the race with the XIVE cleanup code executed by the unplugged CPU. Fix this by waiting indefinitely, but also making an effort to avoid spurious lockup messages by allowing for rescheduling after polling the CPU status and printing a warning if we wait for longer than 120s. Fixes: eac1e731b59ee ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> [mpe: Trim oopses in change log slightly for readability] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200811161544.10513-1-mdroth@linux.vnet.ibm.com
2020-08-18powerpc/32s: Fix is_module_segment() when MODULES_VADDR is definedChristophe Leroy
When MODULES_VADDR is defined, is_module_segment() shall check the address against it instead of checking agains VMALLOC_START. Fixes: 6ca055322da8 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/07884ed033c31e074747b7eb8eaa329d15db07ec.1596641219.git.christophe.leroy@csgroup.eu
2020-08-18powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32Christophe Leroy
On BOOK3S_32, when we have modules and strict kernel RWX, modules are not in vmalloc space but in a dedicated segment that is below PAGE_OFFSET. So KASAN_SHADOW_START must take it into account. MODULES_VADDR can't be used because it is not defined yet in kasan.h Fixes: 6ca055322da8 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6eddca2d5611fd57312a88eae31278c87a8fc99d.1596641224.git.christophe.leroy@csgroup.eu
2020-08-17Revert "scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe"Quinn Tran
FCP T10-PI and NVMe features are independent of each other. This patch allows both features to co-exist. This reverts commit 5da05a26b8305a625bc9d537671b981795b46dab. Link: https://lore.kernel.org/r/20200806111014.28434-12-njavali@marvell.com Fixes: 5da05a26b830 ("scsi: qla2xxx: Disable T10-DIF feature with FC-NVMe during probe") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17Revert "scsi: qla2xxx: Fix crash on qla2x00_mailbox_command"Saurav Kashyap
FCoE adapter initialization failed for ISP8021 with the following patch applied. In addition, reproduction of the issue the patch originally tried to address has been unsuccessful. This reverts commit 3cb182b3fa8b7a61f05c671525494697cba39c6a. Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix null pointer access during disconnect from subsystemQuinn Tran
NVMEAsync command is being submitted to QLA while the same NVMe controller is in the middle of reset. The reset path has deleted the association and freed aen_op->fcp_req.private. Add a check for this private pointer before issuing the command. ... 6 [ffffb656ca11fce0] page_fault at ffffffff8c00114e [exception RIP: qla_nvme_post_cmd+394] RIP: ffffffffc0d012ba RSP: ffffb656ca11fd98 RFLAGS: 00010206 RAX: ffff8fb039eda228 RBX: ffff8fb039eda200 RCX: 00000000000da161 RDX: ffffffffc0d4d0f0 RSI: ffffffffc0d26c9b RDI: ffff8fb039eda220 RBP: 0000000000000013 R8: ffff8fb47ff6aa80 R9: 0000000000000002 R10: 0000000000000000 R11: ffffb656ca11fdc8 R12: ffff8fb27d04a3b0 R13: ffff8fc46dd98a58 R14: 0000000000000000 R15: ffff8fc4540f0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffffb656ca11fe08] nvme_fc_start_fcp_op at ffffffffc0241568 [nvme_fc] 8 [ffffb656ca11fe50] nvme_fc_submit_async_event at ffffffffc0241901 [nvme_fc] 9 [ffffb656ca11fe68] nvme_async_event_work at ffffffffc014543d [nvme_core] 10 [ffffb656ca11fe98] process_one_work at ffffffff8b6cd437 11 [ffffb656ca11fed8] worker_thread at ffffffff8b6cdcef 12 [ffffb656ca11ff10] kthread at ffffffff8b6d3402 13 [ffffb656ca11ff50] ret_from_fork at ffffffff8c000255 -- PID: 37824 TASK: ffff8fb033063d80 CPU: 20 COMMAND: "kworker/u97:451" 0 [ffffb656ce1abc28] __schedule at ffffffff8be629e3 1 [ffffb656ce1abcc8] schedule at ffffffff8be62fe8 2 [ffffb656ce1abcd0] schedule_timeout at ffffffff8be671ed 3 [ffffb656ce1abd70] wait_for_completion at ffffffff8be639cf 4 [ffffb656ce1abdd0] flush_work at ffffffff8b6ce2d5 5 [ffffb656ce1abe70] nvme_stop_ctrl at ffffffffc0144900 [nvme_core] 6 [ffffb656ce1abe80] nvme_fc_reset_ctrl_work at ffffffffc0243445 [nvme_fc] 7 [ffffb656ce1abe98] process_one_work at ffffffff8b6cd437 8 [ffffb656ce1abed8] worker_thread at ffffffff8b6cdb50 9 [ffffb656ce1abf10] kthread at ffffffff8b6d3402 10 [ffffb656ce1abf50] ret_from_fork at ffffffff8c000255 Link: https://lore.kernel.org/r/20200806111014.28434-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Check if FW supports MQ before enablingSaurav Kashyap
OS boot during Boot from SAN was stuck at dracut emergency shell after enabling NVMe driver parameter. For non-MQ support the driver was enabling MQ. Add a check to confirm if FW supports MQ. Link: https://lore.kernel.org/r/20200806111014.28434-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hbaArun Easi
qla_nvme_register_hba() puts out a warning when there are not enough queue pairs available for FC-NVME. Just fail the NVME registration rather than a WARNING + call Trace. Link: https://lore.kernel.org/r/20200806111014.28434-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Allow ql2xextended_error_logging special value 1 to be set ↵Arun Easi
anytime ql2xextended_error_logging can now be set to 1 to get the default mask value, as opposed to at module load time only. Link: https://lore.kernel.org/r/20200806111014.28434-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Reduce noisy debug messageQuinn Tran
Update debug level and message for ELS IOCB done. Link: https://lore.kernel.org/r/20200806111014.28434-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Fix login timeoutQuinn Tran
Multipath errors were seen during failback due to login timeout. The remote device sent LOGO, the local host tore down the session and did relogin. The RSCN arrived indicates remote device is going through failover after which the relogin is in a 20s timeout phase. At this point the driver is stuck in the relogin process. Add a fix to delete the session as part of abort/flush the login. Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Indicate correct supported speeds for Mezz cardQuinn Tran
Correct the supported speeds for 16G Mezz card. Link: https://lore.kernel.org/r/20200806111014.28434-4-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Flush I/O on zone disableQuinn Tran
Perform implicit logout to flush I/O on zone disable. Link: https://lore.kernel.org/r/20200806111014.28434-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Flush all sessions on zone disableQuinn Tran
On Zone Disable, certain switches would ignore all commands. This causes timeout for both switch scan command and abort of that command. On detection of this condition, all sessions will be shutdown. Link: https://lore.kernel.org/r/20200806111014.28434-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: qla2xxx: Use MBX_TOV_SECONDS for mailbox command timeout valuesEnzo Matsumiya
Improves readability of qla_mbx.c. Link: https://lore.kernel.org/r/20200805200546.22497-1-ematsumiya@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: scsi_debug: Fix scp is NULL errorsDouglas Gilbert
John Garry reported 'sdebug_q_cmd_complete: scp is NULL' failures that were mainly seen on aarch64 machines (e.g. RPi 4 with four A72 CPUs). The problem was tracked down to a missing critical section on a "short circuit" path. Namely, the time to process the current command so far has already exceeded the requested command duration (i.e. the number of nanoseconds in the ndelay parameter). The random=1 parameter setting was pivotal in finding this error. The failure scenario involved first taking that "short circuit" path (due to a very short command duration) and then taking the more likely hrtimer_start() path (due to a longer command duration). With random=1 each command's duration is taken from the uniformly distributed [0..ndelay) interval. The fio utility also helped by reliably generating the error scenario at about once per minute on a RPi 4 (64 bit OS). Link: https://lore.kernel.org/r/20200813155738.109298-1-dgilbert@interlog.com Reported-by: John Garry <john.garry@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: zfcp: Fix use-after-free in request timeout handlersSteffen Maier
Before v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use timer_setup()"), we intentionally only passed zfcp_adapter as context argument to zfcp_fsf_request_timeout_handler(). Since we only trigger adapter recovery, it was unnecessary to sync against races between timeout and (late) completion. Likewise, we only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Since we only wakeup an ERP action, it was unnecessary to sync against races between timeout and (late) completion. Meanwhile the timeout handlers get timer_list as context argument and do a timer-specific container-of to zfcp_fsf_req which can have been freed. Fix it by making sure that any request timeout handlers, that might just have started before del_timer(), are completed by using del_timer_sync() instead. This ensures the request free happens afterwards. Space time diagram of potential use-after-free: Basic idea is to have 2 or more pending requests whose timeouts run out at almost the same time. req 1 timeout ERP thread req 2 timeout ---------------- ---------------- --------------------------------------- zfcp_fsf_request_timeout_handler fsf_req = from_timer(fsf_req, t, timer) adapter = fsf_req->adapter zfcp_qdio_siosl(adapter) zfcp_erp_adapter_reopen(adapter,...) zfcp_erp_strategy ... zfcp_fsf_req_dismiss_all list_for_each_entry_safe zfcp_fsf_req_complete 1 del_timer 1 zfcp_fsf_req_free 1 zfcp_fsf_req_complete 2 zfcp_fsf_request_timeout_handler del_timer 2 fsf_req = from_timer(fsf_req, t, timer) zfcp_fsf_req_free 2 adapter = fsf_req->adapter ^^^^^^^ already freed Link: https://lore.kernel.org/r/20200813152856.50088-1-maier@linux.ibm.com Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()") Cc: <stable@vger.kernel.org> #4.15+ Suggested-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: No need to send Abort Task if the task in DB was clearedBean Huo
If the bit corresponding to a task in the Doorbell register has been cleared, no need to poll the status of the task on the device side and to send an Abort Task TM. Instead, let it directly goto cleanup. In addition, to keep original debug output, move the goto below the debug print. Link: https://lore.kernel.org/r/20200811141859.27399-3-huobean@gmail.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Can Guo <cang@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: Clean up completed request without interrupt notificationStanley Chu
If somehow no interrupt notification is raised for a completed request and its doorbell bit is cleared by host, UFS driver needs to cleanup its outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally in the following scenario: After ufshcd_abort() returns, this request will be requeued by SCSI layer with its outstanding bit set. Any future completed request will trigger ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At this time the "abnormal outstanding bit" will be detected and the "requeued request" will be chosen to execute request post-processing flow. This is wrong because this request is still "alive". Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com Reviewed-by: Can Guo <cang@codeaurora.org> Acked-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: Improve interrupt handling for shared interruptsAdrian Hunter
For shared interrupts, the interrupt status might be zero, so check that first. Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: Fix interrupt error message for shared interruptsAdrian Hunter
The interrupt might be shared, in which case it is not an error for the interrupt handler to be called when the interrupt status is zero, so don't print the message unless there was enabled interrupt status. Link: https://lore.kernel.org/r/20200811133936.19171-1-adrian.hunter@intel.com Fixes: 9333d7757348 ("scsi: ufs: Fix irq return code") Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs-pci: Add quirk for broken auto-hibernate for Intel EHLAdrian Hunter
Intel EHL UFS host controller advertises auto-hibernate capability but it does not work correctly. Add a quirk for that. [mkp: checkpatch fix] Link: https://lore.kernel.org/r/20200810141024.28859-1-adrian.hunter@intel.com Fixes: 8c09d7527697 ("scsi: ufshdc-pci: Add Intel PCI IDs for EHL") Acked-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs-mediatek: Fix incorrect time to wait link statusStanley Chu
Fix incorrect calculation of "ms" based waiting time in function ufs_mtk_setup_clocks(). Link: https://lore.kernel.org/r/20200809055702.20140-1-stanley.chu@mediatek.com Fixes: 9006e3986f66 ("scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered yet") Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: Fix possible infinite loop in ufshcd_holdStanley Chu
In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow. Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state. Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Co-developed-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Andy Teng <andy.teng@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: fcoe: Fix I/O path allocationMike Christie
ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of GFP_KERNEL. Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie@oracle.com cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17scsi: ufs: ti-j721e-ufs: Fix error return in ti_j721e_ufs_probe()Jing Xiangfeng
Fix to return error code PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200806070135.67797-1-jingxiangfeng@huawei.com Fixes: 22617e216331 ("scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes") Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-17Merge tag 'pstore-v5.9-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull mailmap update from Kees Cook: "This was originally part of my pstore tree, but when I realized that mailmap needed re-alphabetizing, I decided to wait until -rc1 to send this, as I saw a lot of mailmap additions pending in -next for the merge window. It's a programmatic reordering and the addition of a pstore contributor's preferred email address" * tag 'pstore-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mailmap: Add WeiXiong Liao mailmap: Restore dictionary sorting
2020-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Another batch of fixes: 1) Remove nft_compat counter flush optimization, it generates warnings from the refcount infrastructure. From Florian Westphal. 2) Fix BPF to search for build id more robustly, from Jiri Olsa. 3) Handle bogus getopt lengths in ebtables, from Florian Westphal. 4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and Oleksij Rempel. 5) Reset iter properly on mptcp sendmsg() error, from Florian Westphal. 6) Show a saner speed in bonding broadcast mode, from Jarod Wilson. 7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones. 8) Fix double unregister in bonding during namespace tear down, from Cong Wang. 9) Disable RP filter during icmp_redirect selftest, from David Ahern" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) otx2_common: Use devm_kcalloc() in otx2_config_npa() net: qrtr: fix usage of idr in port assignment to socket selftests: disable rp_filter for icmp_redirect.sh Revert "net: xdp: pull ethernet header off packet after computing skb->protocol" phylink: <linux/phylink.h>: fix function prototype kernel-doc warning mptcp: sendmsg: reset iter on error redux net: devlink: Remove overzealous WARN_ON with snapshots tipc: not enable tipc when ipv6 works as a module tipc: fix uninit skb->data in tipc_nl_compat_dumpit() net: Fix potential wrong skb->protocol in skb_vlan_untag() net: xdp: pull ethernet header off packet after computing skb->protocol ipvlan: fix device features bonding: fix a potential double-unregister can: j1939: add rxtimer for multipacket broadcast session can: j1939: abort multipacket broadcast session when timeout occurs can: j1939: cancel rxtimer on multipacket broadcast session complete can: j1939: fix support for multipacket broadcast message net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs' net: fddi: skfp: cfm: Remove set but unused variable 'oldstate' net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs' ...
2020-08-17otx2_common: Use devm_kcalloc() in otx2_config_npa()Xu Wang
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 06:46:07 +0000