| Age | Commit message (Collapse) | Author |
|---|
|
The atom aux param interface only supports 4 bits for
the total write transfer size (header + payload). This
limits us to 12 bytes of payload rather than 16. Add a
check for this. Reads are not affected.
v2: switch to WARN_ON_ONCE
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The logic was reversed from what the hw actually exposed.
Fixes graphics corruption in certain harvest configurations.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v2: disable it on suspend
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Dump the whole IB if we run into an invalid packet.
This makes things much easier to debug.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89148
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These tend to be problematic even if the vblank period is
long enough. This needs more investigation across a wider
range of displays. Disable for now.
bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=87796
https://bugs.freedesktop.org/show_bug.cgi?id=89198
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Just in case it hasn't been calculated for the mode.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Commit b7bc596ebbe0 ("drm/radeon: disable native
backlight control on pre-r6xx asics (v2)") accidently
broke backlight control on old mac laptops that use the
on-GPU backlight controller.
Signed-off-by: Nathan-J. Hirschauer <nathanhi@deepserve.info>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The recent build changes cause perf to not compile for sparc64 since the
arch/sparc64/Build file does not exist:
/home/dahern/kernels/linux.git/tools/build/Makefile.build:40: arch/sparc64/Build: No such file or directory
Fix by converting the sparc64 RAW_ARCH to sparc ARCH -- similar to what
is done for x86_64.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424306222-96843-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
4886f2ca19f6f added an arm-64 check, but the EM_AARCH64 macro is not
defined in older releases (e.g., RHEL6). Define if it is not defined.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Link: http://lkml.kernel.org/r/1424306017-96797-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
perf-top is terminating due to SIGBUS on sparc64. git bisect points to:
commit 82396986032915c1572bfb74b224fcc2e4e8ba7c
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon Sep 8 13:26:35 2014 -0300
perf evlist: Refcount mmaps
We need to know how many fds are using a perf mmap via
PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap,
refcount it.
This commit added 'int refcnt' to struct perf_mmap and the addition makes the
event_copy element no longer 8-byte aligned.
Fix by adding __attribute__((aligned(8))) to the event_copy struct
member.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424304198-92028-1-git-send-email-david.ahern@oracle.com
[ Switched from 'int pad;' to using __attribute__, David tested/acked that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit f6edb53c4993ffe92ce521fb449d1c146cea6ec2 converted the probe to
a CPU wide event first (pid == -1). For kernels that do not support
the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this
errno is not handled pid is not reset to 0 and the subsequent use of
pid = -1 as an argument brings in an additional failure path if
perf_event_paranoid > 0:
$ perf record -- sleep 1
perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ]
Also, ensure the fd of the confirmation check is closed and comment why
pid = -1 is used.
Needs to go to 3.18 stable tree as well.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Based-on-patch-by: David Ahern <david.ahern@oracle.com>
Acked-by: David Ahern <david.ahern@oracle.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.com
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for various omap devices. It's all dts and defconfig
changes for this set:
- Fix wrong DMA properties for dma to avoid them getting
copied wrong again before we start actually using them
- USB fixes to revert the extcon changes as the driver did not
get merged yet and cause issues
- Omap5 and dra7 fixes to boot from sata
- Fix few am437x issues for i2c and pinctrl
- Fix beaglebone for hardwared USB configuration
- Defconfig changes for NAND, SATA and TPS62362
- Fix n900 i2c numbering for legacy user space and smc91x
register offset so it works also for qemu
- Fix incomplete USB configuration for dm816x
* tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone*: usb0 is hardwired for peripheral
ARM: dts: dra7x-evm: beagle-x15: Fix USB Host
ARM: omap2plus_defconfig: Fix SATA boot
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
ARM: dts: dra7: Correct the dma controller's property names
ARM: dts: omap5: Correct the dma controller's property names
ARM: dts: omap4: Correct the dma controller's property names
ARM: dts: omap3: Correct the dma controller's property names
ARM: dts: omap2: Correct the dma controller's property names
ARM: dts: am437x-idk: fix sleep pinctrl state
ARM: omap2plus_defconfig: enable TPS62362 regulator
ARM: dts: am437x-idk: fix TPS62362 i2c bus
ARM: dts: n900: Fix offset for smc91x ethernet
ARM: dts: n900: fix i2c bus numbering
ARM: dts: Fix USB dts configuration for dm816x
ARM: dts: OMAP5: Fix SATA PHY node
ARM: dts: DRA7: Fix SATA PHY node
|
|
Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache
information") adds cacheinfo support for ARM64. Since there's no
architectural way of detecting the cpus that share particular cache,
device tree can be used and the core cacheinfo already supports the
same.
This patch adds the L2 cache topology on Juno board, FVP/RTSM and
foundation models.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Feature detection for pthread_attr_setaffinity_np was failing, producing
this error:
In file included from bench/futex-hash.c:17:0:
bench/futex.h:73:19: error: conflicting types for ‘pthread_attr_setaffinity_np’
static inline int pthread_attr_setaffinity_np(pthread_attr_t *attr,
^
In file included from bench/futex.h:72:0,
from bench/futex-hash.c:17:
/usr/include/pthread.h:407:12: note: previous declaration of ‘pthread_attr_setaffinity_np’ was here
extern int pthread_attr_setaffinity_np (pthread_attr_t *__attr,
^
make[3]: *** [bench/futex-hash.o] Error 1
make[2]: *** [bench] Error 2
make[2]: *** Waiting for unfinished jobs....
This was because compiling test-pthread-attr-setaffinity-np.c
failed due to the function arguments:
test-pthread-attr-setaffinity-np.c: In function ‘main’:
test-pthread-attr-setaffinity-np.c:11:2: warning: null argument where non-null required (argument 3) [-Wnonnull]
ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL);
^
So fix the arguments.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424774766-24194-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE
must be defined before pthread.h is included in order to get the proper
function declaration. Define this in the Makefile.
Without this defined, the feature check fails on a Fedora system with
gcc5 and then the perf build later fails with conflicting prototypes for
the function.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/20150211162404.GA15522@hansolo.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clockevents driver fixes from Daniel Lezcano:
- Fix the Kconfig to prevent the asm9260 timer to be compiled with
allyesconfig with sparc/sparc64 (Daniel Lezcano)
- Reorder the mtk driver init sequence in order to prevent a potential race
when the clock is registered before the irq handler is set (Matthias Brugger)
- Fix a section mismatch for the pxa driver (Robert Jarzmik)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As pxa_timer_common_init() is only called in init context, mark it as
such, and quiesce the compiler warnings :
WARNING: vmlinux.o(.text.unlikely+0x45d4): Section mismatch in reference
from the function pxa_timer_common_init() to the function
.init.text:sched_clock_register()
WARNING: vmlinux.o(.text.unlikely+0x4610): Section mismatch in reference
from the function pxa_timer_common_init() to the function
.init.text:clocksource_mmio_init()
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
We have two race conditions in the probe code which could lead to a null
pointer dereference in the interrupt handler.
The interrupt handler accesses the clockevent device, which may not yet be
registered.
First race condition happens when the interrupt handler gets registered before
the interrupts get disabled. The second race condition happens when the
interrupts get enabled, but the clockevent device is not yet registered.
Fix that by disabling the interrupts before we register the interrupt and enable
the interrupts after the clockevent device got registered.
Reported-by: Gongbae Park <yongbae2@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Kconfig options for the asm9260 timer is wrong as it can be selected by
another platform with allyes config and thus leading to a compilation failure
as some non arch related code is pulled by the compilation.
Fix this by having the platform Kconfig to select the timer as it is done for
the others drivers.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Oleksij Rempel <linux@rempel-privat.de>
Conflicts:
drivers/clocksource/Kconfig
|
|
This return 0 without setting atomic bits on fb == crtc->cursor->fb
where causing frontbuffer false positives.
According to Daniel:
The original regression seems to have been introduced in the original
check/commit split:
commit 757f9a3e5b8a812af0c213099a5b31cb423f4d3c
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Wed Sep 24 14:20:24 2014 -0300
drm/i915: move check of intel_crtc_cursor_set_obj() out
Which already cause other trouble, resulting in the check getting moved in
commit e391ea882b1a04fb3f559287ac694652a3cd9da9
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date: Wed Sep 24 14:20:25 2014 -0300
drm/i915: Fix not checking cursor and object sizes
The frontbuffer tracking itself only was broken when we shifted it into
the check/commit logic with:
commit 32b7eeec4d1e861230b09d437e95d76c86ff4a68
Author: Matt Roper <matthew.d.roper@intel.com>
Date: Wed Dec 24 07:59:06 2014 -0800
drm/i915: Refactor work that can sleep out of commit (v7)
v2: When putting more debug prints I notice the solution was simpler
than I thought. AMS design is solid, just this return was wrong.
Sorry for the noise.
v3: Remove the entire chunck that would probably
be removed by gcc anyway. (by Daniel)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This is essentially a partial revert of the commit [b1920c21102a:
'ALSA: hda - Enable runtime PM on Panther Point']. There was a bug
report showing the HD-audio bus hang during runtime PM on HP Spectre
XT.
Reported-by: Dang Sananikone <dang.sananikone@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fixes: http://bugs.elinux.org/issues/127
the bb.org community was seeing random reboots before this change.
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In commit 87517d26d888 ("ARM: dts: dra7-evm: Add extcon nodes for USB")
we enabled Extcon USB gpio to tackle the USB ID pin and get
peripheral mode to work.
But the extcon-gpio-usb driver [1] didn't make it into v4.0
and this makes the USB driver defer probe indefinitely breaking
USB Host functionality.
As a temporary fix we remove the extcon handle from the
USB controller and add it back when the extcon driver
merges in v4.1.
[1] - https://lkml.org/lkml/2015/2/2/187
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
SATA operation depends on PIPE3 PHY and if we want
to boot from SATA drives, we have to have the PIPE3 PHY
driver built-in.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Without this NAND doesn't work on most EVMs.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
According to the Documentation/devicetree/bindings/dma/dma.txt the
dma-channels and dma-requests property should not have '#'.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
we have i2c0 sleep pinctrl state but were passing
default state anyhow. Fix that.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
This regulator is used on AM437x Industrial Development Kit.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
As it turns out, tps62362 is actually on I2C bus0,
not bus1. This has gone unnoticed because Linux
doesn't use (as of now) that regulator at all, it's
setup by the bootloader and left as is.
While at that, also add missing reg property for
our regulator.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Offset for smc91x must be zero otherwise smc91x linux kernel driver does not
detect smc91x ethernet hardware in qemu N900 machine.
The 0x300 offset was used to supress a warning the smsc911x
driver produces about non-standard offset as 0x300 seems to
be the EEPROM default. As only three address lines are
connected both 0 and 0x300 will work just fine with 0 being
correct. The warning about the non-standard offset can be
fixed by writing to EEPROM as that's needed in any case to
set the MAC address.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
[tony@atomide.com: updated comments, just use 0 instead of 0x0]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
With legacy boot i2c buses on Nokia N900 are numbered i2c1, i2c2 and i2c3.
Commit 20b80942ef4e ("ARM: dts: OMAP3+: Add i2c aliases") fixed the
numbering with DT boot, but introduced a regression on N900 - aliases
become i2c0, i2c1 and i2c2. Fix that by providing the correct aliases in
the board dts.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: this is needed for legacy user space to work]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bugfixes from David Vrabel:
"Xen regression and bug fixes for 4.0-rc1
- Fix two regressions introduced in 4.0-rc1 affecting PV/PVH guests
in certain configurations.
- Prevent pvscsi frontends bypassing backend checks.
- Allow privcmd hypercalls to be preempted even on kernel with
voluntary preemption. This fixes soft-lockups with long running
toolstack hypercalls (e.g., when creating/destroying large
domains)"
* tag 'stable/for-linus-4.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Initialize cr4 shadow for 64-bit PV(H) guests
xen-scsiback: mark pvscsi frontend request consumed only after last read
x86/xen: allow privcmd hypercalls to be preempted
x86/xen: Make sure X2APIC_ENABLE bit of MSR_IA32_APICBASE is not set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull lguest fixes from Rusty Russell:
"Lguest weird config build fix, and update to the documentation"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
lguest: update help text.
lguest: now depends on PCI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching fixes from Jiri Kosina:
"Two tiny fixes for livepatching infrastructure:
- extending RCU critical section to cover all accessess to
RCU-protected variable, by Petr Mladek
- proper format string passing to kobject_init_and_add(), by Jiri
Kosina"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: RCU protect struct klp_func all the time when used in klp_ftrace_handler()
livepatch: fix format string in kobject_init_and_add()
|
|
Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree
configuration") added basic devices for dm816x, but I was not able
to test the USB completely because of an unconfigured USB phy, and
I only tested it to make sure the Mentor chips are detected and
clocked without a phy.
After testing the USB with actual devices I noticed a few issues
that should be fixed to avoid confusion:
- The USB id pin on dm8168-evm is hardwired and can be changed
only by software. As there are two USB-A type connectors, let's
start both in host mode instead of otg.
- The Mentor core is configured in such a way on dm8168-evm that
it's not capable of multipoint at least on revision c board
that I have.
- We need ranges for the syscon to properly set up the phy as
children of the SCM syscon area.
- Let's not disable the second interface, the board specific
dts files can do that if really needed. Most boards should
just keep it enabled to ensure the device is idled properly.
Note that also a phy and several musb fixes are still needed to
make the USB to work properly in addition to this fix.
Cc: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- a few fixes to Sony driver (rmmod breakage, spinlock initialization),
by Antonio Ospite, Frank Praznik and Jiri Kosina
- fix for wMaxInputLength handling regression in i2c-hid, by Seth
Forshee
- IRQ safety spinlock fix in sensor hub driver, by Srinivas Pandruvada
- IRQ level sensitivity fix to i2c-hid to be compliant with the spec,
by Mika Westerberg
- a couple device ID additions piggy-backing on top of that
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: microsoft: Add ID for NE7K wireless keyboard
HID: i2c-hid: Limit reads to wMaxInputLength bytes for input events
HID: sony: fix uninitialized per-controller spinlock
HID: sony: initialize sony_dev_list_lock properly
HID: sony: Fix a WARNING shown when rmmod-ing the driver
HID: sensor-hub: correct dyn_callback_lock IRQ-safe change
HID: hid-sensor-hub: Correct documentation
HID: saitek: add USB ID for older R.A.T. 7
HID: i2c-hid: The interrupt should be level sensitive
HID: wacom: Add missing ABS_MISC event and feature declaration for 27QHD
|
|
The sata_ref_clk is a reference clock to the SATA phy.
This fixes SATA malfunction across suspend/resume or when
SATA driver is used as a module.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The sata_ref_clk is a reference clock to the SATA phy.
This fixes SATA malfunction across suspend/resume or when
SATA driver is used as a module.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Some bios really like to joke and start the planes at an offset ...
hooray!
Align start and end to fix this.
v2: Fixup calculation of size, spotted by Chris Wilson.
v3: Fix serious fumble I've just spotted.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86883
Cc: stable@vger.kernel.org
Cc: Johannes W <jargon@molb.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-and-tested-by: Johannes W <jargon@molb.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[Jani: split WARN_ONs, rebase on v4.0-rc1]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Atm, it's possible that the interrupt handler is called when the device
is in D3 or some other low-power state. It can be due to another device
that is still in D0 state and shares the interrupt line with i915, or on
some platforms there could be spurious interrupts even without sharing
the interrupt line. The latter case was reported by Klaus Ethgen using a
Lenovo x61p machine (gen 4). He noticed this issue via a system
suspend/resume hang and bisected it to the following commit:
commit e11aa362308f5de467ce355a2a2471321b15a35c
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed Jun 18 09:52:55 2014 -0700
drm/i915: use runtime irq suspend/resume in freeze/thaw
This is a problem, since in low-power states IIR will always read
0xffffffff resulting in an endless IRQ servicing loop.
Fix this by handling interrupts only when the driver explicitly enables
them and so it's guaranteed that the interrupt registers return a valid
value.
Note that this issue existed even before the above commit, since during
runtime suspend/resume we never unregistered the handler.
v2:
- clarify the purpose of smp_mb() vs. synchronize_irq() in the
code comment (Chris)
v3:
- no need for an explicit smp_mb(), we can assume that synchronize_irq()
and the mmio read/writes in the install hooks provide for this (Daniel)
- remove code comment as the remaining synchronize_irq() is self
explanatory (Daniel)
v4:
- drm_irq_uninstall() implies synchronize_irq(), so no need to call it
explicitly (Daniel)
Reference: https://lkml.org/lkml/2015/2/11/205
Reported-and-bisected-by: Klaus Ethgen <Klaus@Ethgen.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When we walk the list of vma, or even for protecting against concurrent
framebuffer creation, we must hold the struct_mutex or else a second
thread can corrupt the list as we walk it.
Fixes regression from
commit d7f46fc4e7323887494db13f063a8e59861fefb0
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Fri Dec 6 14:10:55 2013 -0800
drm/i915: Make pin count per VMA
References: https://bugs.freedesktop.org/show_bug.cgi?id=89085
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
When converting from implicitly tracked execlist queue items to ref counted
requests, not all frees of requests were replaced with unrefs, and extraneous
refs/unrefs of contexts were added.
Correct the unbalanced refcount & replace the frees.
Remove a noisy warning when hitting the request creation path.
drm_i915_gem_request and intel_context are both kref reference counted
structures. Upon allocation, drm_i915_gem_request's ref count should be
bumped using kref_init. When a context is assigned to the request,
the context's reference count should be bumped using i915_gem_context_reference.
i915_gem_request_reference will reduce the context reference count when
the request is freed.
Problem introduced in
commit 6d3d8274bc45de4babb62d64562d92af984dd238
Author: Nick Hoath <nicholas.hoath@intel.com>
AuthorDate: Thu Jan 15 13:10:39 2015 +0000
drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request
v2: Added comments explaining how the ctx pointer and the request object should
be ref-counted. Removed noisy warning.
v3: Cleaned up the language used in the commit & the header
description (Thanks David Gordon)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88652
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
It is a bad idea to export static functions. GCC for some platforms
shows errors like:
error: __ksymtab_azx_get_response causes a section type conflict
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove a useless pm_runtime_put_sync leading to unbalanced
usage_count.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
|
