| Age | Commit message (Collapse) | Author |
|---|
|
When HCI_QUIRK_STRICT_DUPLICATE_FILTER is set LE scanning requires
periodic restarts of the scanning procedure as the controller would
consider device previously found as duplicated despite of RSSI changes,
but in order to set the scan timeout properly set le_scan_restart needs
to be synchronous so it shall not use hci_cmd_sync_queue which defers
the command processing to cmd_sync_work.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-bluetooth/578e6d7afd676129decafba846a933f5@agner.ch/#t
Fixes: 27d54b778ad1 ("Bluetooth: Rework le_scan_restart for hci_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
We should send hci reset command before bt turn off, which can reset bt
firmware status.
Signed-off-by: Rocky Liao <quic_rjliao@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
hci_req_prepare_suspend() has been deprecated in favor of
hci_suspend_sync().
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y,
modprobe handshake-test and then rmmmod handshake-test, the below memory
leak is detected.
The struct socket_alloc which is allocated by alloc_inode_sb() in
__sock_create() is not freed. And the struct dentry which is allocated
by __d_alloc() in sock_alloc_file() is not freed.
Since fput() will call file->f_op->release() which is sock_close() here and
it will call __sock_release(). and fput() will call dput(dentry) to free
the struct dentry. So replace sock_release() with fput() to fix the
below memory leak. After applying this patch, the following memory leak is
never detected.
unreferenced object 0xffff888109165840 (size 768):
comm "kunit_try_catch", pid 1852, jiffies 4294685807 (age 976.262s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa0209ba2>] 0xffffffffa0209ba2
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810f472008 (size 192):
comm "kunit_try_catch", pid 1852, jiffies 4294685808 (age 976.261s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 08 20 47 0f 81 88 ff ff ......... G.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0209bbb>] 0xffffffffa0209bbb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810958e580 (size 224):
comm "kunit_try_catch", pid 1852, jiffies 4294685808 (age 976.261s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0209bbb>] 0xffffffffa0209bbb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926dc88 (size 192):
comm "kunit_try_catch", pid 1854, jiffies 4294685809 (age 976.271s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 88 dc 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208fdc>] 0xffffffffa0208fdc
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a241380 (size 224):
comm "kunit_try_catch", pid 1854, jiffies 4294685809 (age 976.271s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208fdc>] 0xffffffffa0208fdc
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109165040 (size 768):
comm "kunit_try_catch", pid 1856, jiffies 4294685811 (age 976.269s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa0208860>] 0xffffffffa0208860
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926d568 (size 192):
comm "kunit_try_catch", pid 1856, jiffies 4294685811 (age 976.269s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 68 d5 26 09 81 88 ff ff ........h.&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208879>] 0xffffffffa0208879
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a240580 (size 224):
comm "kunit_try_catch", pid 1856, jiffies 4294685811 (age 976.347s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208879>] 0xffffffffa0208879
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109164c40 (size 768):
comm "kunit_try_catch", pid 1858, jiffies 4294685816 (age 976.342s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa0208541>] 0xffffffffa0208541
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926cd18 (size 192):
comm "kunit_try_catch", pid 1858, jiffies 4294685816 (age 976.342s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 18 cd 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa020855a>] 0xffffffffa020855a
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a240200 (size 224):
comm "kunit_try_catch", pid 1858, jiffies 4294685816 (age 976.342s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa020855a>] 0xffffffffa020855a
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109164840 (size 768):
comm "kunit_try_catch", pid 1860, jiffies 4294685817 (age 976.416s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa02093e2>] 0xffffffffa02093e2
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926cab8 (size 192):
comm "kunit_try_catch", pid 1860, jiffies 4294685817 (age 976.416s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 b8 ca 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02093fb>] 0xffffffffa02093fb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a240040 (size 224):
comm "kunit_try_catch", pid 1860, jiffies 4294685817 (age 976.416s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02093fb>] 0xffffffffa02093fb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109166440 (size 768):
comm "kunit_try_catch", pid 1862, jiffies 4294685819 (age 976.489s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa02097c1>] 0xffffffffa02097c1
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926c398 (size 192):
comm "kunit_try_catch", pid 1862, jiffies 4294685819 (age 976.489s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 98 c3 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02097da>] 0xffffffffa02097da
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107e0b8c0 (size 224):
comm "kunit_try_catch", pid 1862, jiffies 4294685819 (age 976.489s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02097da>] 0xffffffffa02097da
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109164440 (size 768):
comm "kunit_try_catch", pid 1864, jiffies 4294685821 (age 976.487s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa020824e>] 0xffffffffa020824e
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810f4cf698 (size 192):
comm "kunit_try_catch", pid 1864, jiffies 4294685821 (age 976.501s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 98 f6 4c 0f 81 88 ff ff ..........L.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208267>] 0xffffffffa0208267
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107e0b000 (size 224):
comm "kunit_try_catch", pid 1864, jiffies 4294685821 (age 976.501s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208267>] 0xffffffffa0208267
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
Fixes: 88232ec1ec5e ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
before check 'hwdev'
'hwdev' is checked too late and hwdev will not be NULL, so remove the check
Fixes: 2acf960e3be6 ("net: hinic: Add support for configuration of rx-vlan-filter by ethtool")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202309112354.pikZCmyk-lkp@intel.com/
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are some attributes added by vxlan_fill_info() which are not
accounted for in vxlan_get_size(). Add them.
I didn't find a way to trigger an actual problem from this miscalculation
since there is usually extra space in netlink size calculations like
if_nlmsg_size(); but maybe I just didn't search long enough.
Fixes: 3511494ce2f3 ("vxlan: Group Policy extension")
Fixes: e1e5314de08b ("vxlan: implement GPE")
Fixes: 0ace2ca89cbd ("vxlan: Use checksum partial with remote checksum offload")
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rds_rdma_cm_event_handler_cmn() check, if conn pointer exists
before dereferencing it as rdma_set_service_type() argument
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: fd261ce6a30e ("rds: rdma: update rdma transport for tos")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot/KCSAN reported data-races in br_handle_frame_finish() [1]
This function can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Handles updates to dev->stats.tx_dropped while we are at it.
[1]
BUG: KCSAN: data-race in br_handle_frame_finish / br_handle_frame_finish
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 1:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
read-write to 0xffff8881374b2178 of 8 bytes by interrupt on cpu 0:
br_handle_frame_finish+0xd4f/0xef0 net/bridge/br_input.c:189
br_nf_hook_thresh+0x1ed/0x220
br_nf_pre_routing_finish_ipv6+0x50f/0x540
NF_HOOK include/linux/netfilter.h:304 [inline]
br_nf_pre_routing_ipv6+0x1e3/0x2a0 net/bridge/br_netfilter_ipv6.c:178
br_nf_pre_routing+0x526/0xba0 net/bridge/br_netfilter_hooks.c:508
nf_hook_entry_hookfn include/linux/netfilter.h:144 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:272 [inline]
br_handle_frame+0x4c9/0x940 net/bridge/br_input.c:417
__netif_receive_skb_core+0xa8a/0x21e0 net/core/dev.c:5417
__netif_receive_skb_one_core net/core/dev.c:5521 [inline]
__netif_receive_skb+0x57/0x1b0 net/core/dev.c:5637
process_backlog+0x21f/0x380 net/core/dev.c:5965
__napi_poll+0x60/0x3b0 net/core/dev.c:6527
napi_poll net/core/dev.c:6594 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6727
__do_softirq+0xc1/0x265 kernel/softirq.c:553
do_softirq+0x5e/0x90 kernel/softirq.c:454
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381
__raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
_raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210
spin_unlock_bh include/linux/spinlock.h:396 [inline]
batadv_tt_local_purge+0x1a8/0x1f0 net/batman-adv/translation-table.c:1356
batadv_tt_purge+0x2b/0x630 net/batman-adv/translation-table.c:3560
process_one_work kernel/workqueue.c:2630 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2703
worker_thread+0x525/0x730 kernel/workqueue.c:2784
kthread+0x1d7/0x210 kernel/kthread.c:388
ret_from_fork+0x48/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00000000000d7190 -> 0x00000000000d7191
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 14848 Comm: kworker/u4:11 Not tainted 6.6.0-rc1-syzkaller-00236-gad8a69f361b9 #0
Fixes: 1c29fc4989bc ("[BRIDGE]: keep track of received multicast packets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: bridge@lists.linux-foundation.org
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230918091351.1356153-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://lore.kernel.org/r/20230918074840.2650978-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. we think firmware watchdog initialization is completed
before hns3 clear the firmware interrupt source. However, firmware
initialization may not complete early.
so we add delay before hns3 clear firmware interrupt source and 5 ms delay
is enough to avoid second firmware reset interrupt.
Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Firmware does not respond driver commands during reset
Therefore, rule will fail to delete while the firmware is resetting
So, if failed to delete rule, set rule state to TO_DEL,
and the rule will be deleted when periodic task being scheduled.
Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the driver will enable unicast promisc for the function
once configure mac address fail. It's unreasonable when the failure
is caused by using same mac address with other functions. So only
enable unicast promisc when mac table full.
Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The device_version V3 hardware can't offload the checksum for IP in GRE
packets, but can do it for NvGRE. So default to disable the checksum and
GSO offload for GRE, but keep the ability to enable it when only using
NvGRE.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the vf cmdq is disabled, there is no need to keep these task running.
So this patch skip these task when the cmdq is disabled.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
commit 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics
where necessary") caused one regression as found by Uwe, the backtrace
looks like:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc1-00449-g133466c3bbe1-dirty #21
Hardware name: STM32 (Device Tree Support)
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x60/0x90
dump_stack_lvl from register_lock_class+0x98c/0x99c
register_lock_class from __lock_acquire+0x74/0x293c
__lock_acquire from lock_acquire+0x134/0x398
lock_acquire from stmmac_get_stats64+0x2ac/0x2fc
stmmac_get_stats64 from dev_get_stats+0x44/0x130
dev_get_stats from rtnl_fill_stats+0x38/0x120
rtnl_fill_stats from rtnl_fill_ifinfo+0x834/0x17f4
rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xc0/0x144
rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x50/0x88
rtmsg_ifinfo from __dev_notify_flags+0xc0/0xec
__dev_notify_flags from dev_change_flags+0x50/0x5c
dev_change_flags from ip_auto_config+0x2f4/0x1260
ip_auto_config from do_one_initcall+0x70/0x35c
do_one_initcall from kernel_init_freeable+0x2ac/0x308
kernel_init_freeable from kernel_init+0x1c/0x138
kernel_init from ret_from_fork+0x14/0x2c
The reason is the rxq|txq_stats structures are not what expected
because stmmac_open() -> __stmmac_open() the structure is overwritten
by "memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));"
This causes the well initialized syncp member of rxq|txq_stats is
overwritten unexpectedly as pointed out by Johannes and Uwe.
Fix this issue by moving rxq|txq_stats back to stmmac_extra_stats. For
SMP cache friendly, we also mark stmmac_txq_stats and stmmac_rxq_stats
as ____cacheline_aligned_in_smp.
Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230917165328.3403-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Peter Lafreniere says:
====================
ax25: Update link for linux-ax25.org
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.
Update all references to the dead link to its replacement.
As the three touched files are in different areas of the tree, this is
being sent with one patch per file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de. Change all references to
the old site in the ax25 Kconfig to its replacement.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de. Update all links to the
new URL.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
http://linux-ax25.org has been down for nearly a year. Its official
replacement is https://linux-ax25.in-berlin.de.
Update the documentation to point there instead. And acknowledge that
while the linux-hams list isn't entirely dead, it isn't what most would
call 'active'. Remove that word.
Link: https://marc.info/?m=166792551600315
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Matthieu Baerts says:
====================
mptcp: fix stalled connections
Daire reported a few issues with MPTCP where some connections were
stalled in different states. Paolo did a great job fixing them.
Patch 1 fixes bogus receive window shrinkage with multiple subflows. Due
to a race condition and unlucky circumstances, that may lead to
TCP-level window shrinkage, and the connection being stalled on the
sender end.
Patch 2 is a preparation for patch 3 which processes pending subflow
errors on close. Without that and under specific circumstances, the
MPTCP-level socket might not switch to the CLOSE state and stall.
Patch 4 is also a preparation patch for the next one. Patch 5 fixes
MPTCP connections not switching to the CLOSE state when all subflows
have been closed but no DATA_FIN have been exchanged to explicitly close
the MPTCP connection. Now connections in such state will switch to the
CLOSE state after a timeout, still allowing the "make-after-break"
feature but making sure connections don't stall forever. It will be
possible to modify this timeout -- currently matching TCP TIMEWAIT value
(60 seconds) -- in a future version.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
|
|
According to RFC 8684 section 3.3:
A connection is not closed unless [...] or an implementation-specific
connection-level send timeout.
Currently the MPTCP protocol does not implement such timeout, and
connection timing-out at the TCP-level never move to close state.
Introduces a catch-up condition at subflow close time to move the
MPTCP socket to close, too.
That additionally allows removing similar existing inside the worker.
Finally, allow some additional timeout for plain ESTABLISHED mptcp
sockets, as the protocol allows creating new subflows even at that
point and making the connection functional again.
This issue is actually present since the beginning, but it is basically
impossible to solve without a long chain of functional pre-requisites
topped by commit bbd49d114d57 ("mptcp: consolidate transition to
TCP_CLOSE in mptcp_do_fastclose()"). When backporting this current
patch, please also backport this other commit as well.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/430
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The msk socket uses to different timeout to track close related
events and retransmissions. The existing helpers do not indicate
clearly which timer they actually touch, making the related code
quite confusing.
Change the existing helpers name to avoid such confusion. No
functional change intended.
This patch is linked to the next one ("mptcp: fix dangling connection
hang-up"). The two patches are supposed to be backported together.
Cc: stable@vger.kernel.org # v5.11+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On incoming TCP reset, subflow closing could happen before error
propagation. That in turn could cause the socket error being ignored,
and a missing socket state transition, as reported by Daire-Byrne.
Address the issues explicitly checking for subflow socket error at
close time. To avoid code duplication, factor-out of __mptcp_error_report()
a new helper implementing the relevant bits.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/429
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This will simplify the next patch ("mptcp: process pending subflow error
on close").
No functional change intended.
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case multiple subflows race to update the mptcp-level receive
window, the subflow losing the race should use the window value
provided by the "winning" subflow to update it's own tcp-level
rcv_wnd.
To such goal, the current code bogusly uses the mptcp-level rcv_wnd
value as observed before the update attempt. On unlucky circumstances
that may lead to TCP-level window shrinkage, and stall the other end.
Address the issue feeding to the rcv wnd update the correct value.
Fixes: f3589be0c420 ("mptcp: never shrink offered window")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/427
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Gerhard Engleder says:
====================
tsnep: Fixes based on napi.rst
Based on the documentation networking/napi.rst some fixes have been
done. tsnep driver should be in line with this new documentation after
these fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the NAPI documentation networking/napi.rst, Rx specific
APIs like page pool and XDP cannot be used at all when budget is 0.
skb Tx processing should happen regardless of the budget.
Stop NAPI polling after Tx processing and skip Rx processing if budget
is 0.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the NAPI documentation networking/napi.rst, for the ethtool
API a channel is a IRQ/NAPI which services queues of a given type.
tsnep uses a single IRQ/NAPI instance for every TX/RX queue pair.
Therefore, combined channels shall be returned instead of separate tx/rx
channels.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to the NAPI documentation networking/napi.rst, drivers which
have to mask interrupts explicitly should use the napi_schedule_prep()
and __napi_schedule() calls.
No problem seen so far with current implementation. Nevertheless, let's
align the implementation with documentation.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sebastian Andrzej Siewior says:
====================
net: hsr: Properly parse HSRv1 supervisor frames.
this is a follow-up to
https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/
replacing
https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/
by grabing/ adding tags and reposting with a commit message plus a
missing __packed to a struct (#2) plus extending the testsuite to sover
HSRv1 which is what broke here (#3-#5).
HSRv0 is (was) not affected.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The testsuite already has simply tests for HSRv0. The testuite would
have been able to notice the v1 breakage if it was there at the time.
Extend the testsuite to also cover HSRv1.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the code and group into functions so it will be easier to extend
the test to HSRv1 so that both versions are covered.
Move the ping/test part into do_complete_ping_test() and the interface
setup into setup_hsr_interfaces().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The timeout in the while loop is never subtracted due wrong usage of
`let' leading to an endless loop if the former condition never gets
true.
Put the statement for let in quotes so it is parsed as a single
statement.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Struct hsr_sup_tlv describes HW layout and therefore it needs a __packed
attribute to ensure the compiler does not add any padding.
Due to the size and __packed attribute of the structs that use
hsr_sup_tlv it has no functional impact.
Add __packed to struct hsr_sup_tlv.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While adding support for parsing the redbox supervision frames, the
author added `pull_size' and `total_pull_size' to track the amount of
bytes that were pulled from the skb during while parsing the skb so it
can be reverted/ pushed back at the end.
In the process probably copy&paste error occurred and for the HSRv1 case
the ethhdr was used instead of the hsr_tag. Later the hsr_tag was used
instead of hsr_sup_tag. The later error didn't matter because both
structs have the size so HSRv0 was still working. It broke however HSRv1
parsing because struct ethhdr is larger than struct hsr_tag.
Reinstate the old pulling flow and pull first ethhdr, hsr_tag in v1 case
followed by hsr_sup_tag.
[bigeasy: commit message]
Fixes: eafaa88b3eb7 ("net: hsr: Add support for redbox supervision frames")'
Suggested-by: Tristram.Ha@microchip.com
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dh->dccph_x is the 9th byte (offset 8) in "struct dccp_hdr",
not in the "byte 7" as Jann claimed.
We need to make sure the ICMP messages are big enough,
using more standard ways (no more assumptions).
syzbot reported:
BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2667 [inline]
BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2681 [inline]
BUG: KMSAN: uninit-value in dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94
pskb_may_pull_reason include/linux/skbuff.h:2667 [inline]
pskb_may_pull include/linux/skbuff.h:2681 [inline]
dccp_v6_err+0x426/0x1aa0 net/dccp/ipv6.c:94
icmpv6_notify+0x4c7/0x880 net/ipv6/icmp.c:867
icmpv6_rcv+0x19d5/0x30d0
ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438
ip6_input_finish net/ipv6/ip6_input.c:483 [inline]
NF_HOOK include/linux/netfilter.h:304 [inline]
ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492
ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:304 [inline]
ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5523 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637
netif_receive_skb_internal net/core/dev.c:5723 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5782
tun_rx_batched+0x83b/0x920
tun_get_user+0x564c/0x6940 drivers/net/tun.c:2002
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:1985 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x8ef/0x15c0 fs/read_write.c:584
ksys_write+0x20f/0x4c0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6313
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2795
tun_alloc_skb drivers/net/tun.c:1531 [inline]
tun_get_user+0x23cf/0x6940 drivers/net/tun.c:1846
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:1985 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x8ef/0x15c0 fs/read_write.c:584
ksys_write+0x20f/0x4c0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 4995 Comm: syz-executor153 Not tainted 6.6.0-rc1-syzkaller-00014-ga747acc0b752 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
Fixes: 977ad86c2a1b ("dccp: Fix out of bounds access in DCCP error handler")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jann Horn <jannh@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Report the carrier/no-carrier state for the network interface
shared between the BMC and the passthrough channel. Without this
functionality the BMC is unable to reconfigure the NIC in the event
of a re-cabling to a different subnet.
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
queue
Tony Nguyen says:
====================
This series contains updates to iavf and i40e drivers.
Radoslaw prevents admin queue operations being added when the driver is
being removed for iavf.
Petr Oros immediately starts reconfiguration on changes to VLANs on
iavf.
Ivan Vecera moves reset of VF to occur after port VLAN values are set
on i40e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nothing prevents iscsi_sw_tcp_conn_bind() to receive file descriptor
pointing to non TCP socket (af_unix for example).
Return -EINVAL if this is attempted, instead of crashing the kernel.
Fixes: 7ba247138907 ("[SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: open-iscsi@googlegroups.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we assume the skb is associated with a device before calling
__ip_options_compile, which is not always the case if it is re-routed by
ipvs.
When skb->dev is NULL, dev_net(skb->dev) will become null-dereference.
This patch adds a check for the edge case and switch to use the net_device
from the rtable when skb->dev is NULL.
Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure")
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Cc: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an XDP redirect happens before the link is ready, that
transmission will not finish and will timeout, causing an adapter
reset. If the redirects do not stop, the adapter will not stop
resetting.
Wait for the driver to signal that there's a carrier before allowing
transmissions to proceed.
Previous code was relying that when __IGC_DOWN is cleared, the NIC is
ready to transmit as all the queues are ready, what happens is that
the carrier presence will only be signaled later, after the watchdog
workqueue has a chance to run. And during this interval (between
clearing __IGC_DOWN and the watchdog running) if any transmission
happens the timeout is emitted (detected by igc_tx_timeout()) which
causes the reset, with the potential for the infinite loop.
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Reported-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Closes: https://lore.kernel.org/netdev/0caf33cf6adb3a5bf137eeaa20e89b167c9986d5.camel@ericsson.com/
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Ferenc Fejes <ferenc.fejes@ericsson.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them.
It is less verbose and it improves the type checking and semantic.
While at it, add missing header inclusion (should be bitops.h,
but with the above change it becomes bitmap.h).
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230911154534.4174265-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ionic device supports a maximum buffer length of 16 bits (see
ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to
the receive rings, the function ionic_rx_fill() uses 16bit math when
calculating the number of pages to allocate for an RX descriptor,
given the interface's MTU setting. If the system PAGE_SIZE >= 64KB,
and the buf_info->page_offset is 0, the remain_len value will never
decrement from the original MTU value and the frag_len value will
always be 0, causing additional pages to be allocated as scatter-
gather elements unnecessarily.
A similar math issue exists in ionic_rx_frags(), but no failures
have been observed here since a 64KB page should not normally
require any scatter-gather elements at any legal Ethernet MTU size.
Fixes: 4b0a7539a372 ("ionic: implement Rx page reuse")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-2-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Marcus and Satya reported an issue where BTF_ID macro generates same
symbol in separate objects and that breaks final vmlinux link.
ld.lld: error: ld-temp.o <inline asm>:14577:1: symbol
'__BTF_ID__struct__cgroup__624' is already defined
This can be triggered under specific configs when __COUNTER__ happens to
be the same for the same symbol in two different translation units,
which is already quite unlikely to happen.
Add __LINE__ number suffix to make BTF_ID symbol more unique, which is
not a complete fix, but it would help for now and meanwhile we can work
on better solution as suggested by Andrii.
Cc: stable@vger.kernel.org
Reported-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1913
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bzb5KQ2_LmhN769ifMeSJaWfebccUasQOfQKaOd0nQ51tw@mail.gmail.com/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230915-bpf_collision-v3-1-263fc519c21f@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dan reported Smatch static checker warning due to missing error
value set in uprobe multi link's get_pid_task error path.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/c5ffa7c0-6b06-40d5-aca2-63833b5cd9af@moroto.mountain/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230915101420.1193800-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For global per-cpu allocator, the size of free object in free list
doesn't match with unit_size and now there is no way to get the size of
per-cpu pointer saved in free object, so just skip the checking.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/bpf/20230913133436.0eeec4cb@canb.auug.org.au/
Signed-off-by: Hou Tao <houtao1@huawei.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230913135943.3137292-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_nf testcase fails on s390x: bpf_skb_ct_lookup() cannot find the entry
that was added by bpf_ct_insert_entry() within the same BPF function.
The reason is that this entry is deleted by nf_ct_gc_expired().
The CT timeout starts ticking after the CT confirmation; therefore
nf_conn.timeout is initially set to the timeout value, and
__nf_conntrack_confirm() sets it to the deadline value.
bpf_ct_insert_entry() sets IPS_CONFIRMED_BIT, but does not adjust the
timeout, making its value meaningless and causing false positives.
Fix the problem by making bpf_ct_insert_entry() adjust the timeout,
like __nf_conntrack_confirm().
Fixes: 2cdaa3eefed8 ("netfilter: conntrack: restore IPS_CONFIRMED out of nf_conntrack_hash_check_insert()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/bpf/20230830011128.1415752-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
