Age | Commit message (Collapse) | Author |
|
WAs 14011508470, 14011503030 were applied on IP versions beyond which
they are applicable. Fixed the IP version checks for these workarounds.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231128102451.825242-1-balasubramani.vivekanandan@intel.com
|
|
Current, the dewake_scanline variable is defined as unsigned int,
an unsigned int variable that is always greater than or equal to 0.
when _intel_dsb_commit function is called by intel_dsb_commit function,
the dewake_scanline variable may have an int value.
So the dewake_scanline variable is necessary to defined as an int.
Fixes: f83b94d23770 ("drm/i915/dsb: Use DEwake to combat PkgC latency")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310052201.AnVbpgPr-lkp@intel.com/
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: heminhong <heminhong@kylinos.cn>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114024341.14524-1-heminhong@kylinos.cn
|
|
Dump the iir value in hex when the interrupt is unexpected.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9652#note_2178501
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231126214142.102106-1-sergeantsagara@protonmail.com
|
|
Use the >= and < operators for the DISPLAY_VER checks everywhere.
This is what most of the code does, but especially recently random
pieces of code have started doing this differently for no good reason.
Conversion done with the following cocci:
@find@
expression i915;
constant ver;
@@
(
DISPLAY_VER(i915) <= ver
|
DISPLAY_VER(i915) > ver
)
@script:python inc@
old_ver << find.ver;
new_ver;
@@
coccinelle.new_ver = str(int(old_ver) + 1)
@@
expression find.i915;
constant find.ver;
identifier inc.new_ver;
@@
(
- DISPLAY_VER(i915) <= ver
+ DISPLAY_VER(i915) < new_ver
|
- DISPLAY_VER(i915) > ver
+ DISPLAY_VER(i915) >= new_ver
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
We have no bigjoiner support in the MST code, so .mode_valid()
pretending otherwise is just going to result black screens for
users. Reject any mode that needs the joiner.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
.mode_valid_ctx() returns an errno, not the mode status. Fix
the code to do the right thing.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Apparently some BXT/GLK systems have DSI panels whose timings
don't agree with the normal cpu transcoder hblank>=32 limitation.
This is perhaps fine as there are no specific hblank/etc. limits
listed for the BXT/GLK DSI transcoders.
Move those checks out from the global intel_mode_valid() into
into connector specific .mode_valid() hooks, skipping BXT/GLK
DSI connectors. We'll leave the basic [hv]display/[hv]total
checks in intel_mode_valid() as those seem like sensible upper
limits regardless of the transcoder used.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9720
Fixes: 8f4b1068e7fc ("drm/i915: Check some transcoder timing minimum limits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127145028.4899-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently no one can figure out what the PSR code is doing since
we're including any of it in the basic state dump. Add at least the
bare minimum there.
v2: Also dump has_panel_replay (Jouni)
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124082735.25470-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
In earlier versions, FBC was restricted if PSR2 is enabled. From
xe2lpd onwards no such restrictions are needed anymore.
HSD: 14014305387
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231110093225.39573-2-vinod.govindapillai@intel.com
|
|
Currently we are enabling selective fetch for all planes that are visible.
This is suboptimal as we might be fetching for memory for planes that are
not part of selective update.
Fix this by adding proper handling for disabling plane selective fetch:
If plane previously part of selective update is now not part of update:
Add it into updated planes and let the plane configuration to disable
selective fetch for it.
v3: Checkpatch warnings fixed
v2:
- Add setting sel_fetch_area->y1/y2 to -1
- Remove setting again local sel_fetch_area variable
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-3-jouni.hogander@intel.com
|
|
Currently selective fetch configuration for planes is implemented in psr
code. More suitable place for this code is where everything else is
configured for planes -> move it into skl_universal_plane.c and
intel_cursor.c. This also allows us to drop hooks for cursor handling.
v3: Checkpatch warnings fixed
v2: Removed setting sel_fetch_area->y1/y2 as -1
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120082606.3156488-2-jouni.hogander@intel.com
|
|
Adding ad-hoc debug prints all over the place is not good.
Move the SDP split debug spew into the proper place (state
dumper).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122093137.1509-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
Print the pipe name in ascii rather than hex.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231122093137.1509-3-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
The current implementation of change_lut_val_precision() is just
a convoluted way of shifting by 8. Implement the proper rounding
by just using drm_color_lut_extract() and intel_color_lut_pack()
like everyone else does.
And as the uapi can't handle >=1.0 values but the hardware
can we need to clamp the results appropriately in the readout
path.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-5-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use min() instead of clamp() since the color values
involved are unsigned. No functional changes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-4-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
drm_color_lut_extract() rounding was changed to follow the
OpenGL int<->float conversion rules. Adjust intel_color_lut_pack()
to match.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-3-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
The current implementation of drm_color_lut_extract()
generates weird results. Eg. if we go through all the
values for 16->8bpc conversion we see the following pattern:
in out (count)
0 - 7f -> 0 (128)
80 - 17f -> 1 (256)
180 - 27f -> 2 (256)
280 - 37f -> 3 (256)
...
fb80 - fc7f -> fc (256)
fc80 - fd7f -> fd (256)
fd80 - fe7f -> fe (256)
fe80 - ffff -> ff (384)
So less values map to 0 and more values map 0xff, which
doesn't seem particularly great.
To get just the same number of input values to map to
the same output values we'd just need to drop the rounding
entrirely. But perhaps a better idea would be to follow the
OpenGL int<->float conversion rules, in which case we get
the following results:
in out (count)
0 - 80 -> 0 (129)
81 - 181 -> 1 (257)
182 - 282 -> 2 (257)
283 - 383 -> 3 (257)
...
fc7c - fd7c -> fc (257)
fd7d - fe7d -> fd (257)
fe7e - ff7e -> fe (257)
ff7f - ffff -> ff (129)
Note that since the divisor is constant the compiler
is able to optimize away the integer division in most
cases. The only exception is the _ULL() case on 32bit
architectures since that gets emitted as inline asm
via do_div() and thus the compiler doesn't get to
optimize it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-2-ville.syrjala@linux.intel.com
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
|
|
We are preparing for Xe driver. I915 and Xe object implementation are
differing. Use intel_bo_to_drm_bo instead of &obj->base.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116150225.204233-3-juhapekka.heikkila@gmail.com
|
|
touch dpt_vma->node only if dpt-vma is not NULL
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116150225.204233-2-juhapekka.heikkila@gmail.com
|
|
Here created intel_dpt_common.c to hold intel_dpt_configure which is
needed for both xe and i915.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116150225.204233-1-juhapekka.heikkila@gmail.com
|
|
There's no real reason why we'd need a full modeset for audio
changes. So let's allow audio to be toggled during fastset.
In case the ELD changes while has_audio isn't changing state
we force both audio disable and enable so the new ELD gets
propagated to the audio driver.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-12-ville.syrjala@linux.intel.com
|
|
Relocate the audio enable/disable from the full modeset hooks into
the common pre/post plane update stage of the commit. Audio fastset
is within easy reach now.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-11-ville.syrjala@linux.intel.com
|
|
Push the encoder->audio_{enable,disable}() calls out from the
encoder->{enable,disable}() hooks. Moving towards audio fastset.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-10-ville.syrjala@linux.intel.com
|
|
Add encoder vfuncs for audio enable/disable. This will allow
audio to be enabled/disabled during fastsets. An encoder hook
is necessary as on pre-hsw platforms different encoder types
implement audio in different ways.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-9-ville.syrjala@linux.intel.com
|
|
Follow the hsw+ approach toggle the audio presence detect
when we set up the ELD, instead of doing it when turning the
port on/off.
This will facilitate audio enable/disable to happen during
fastsets instead of requiring a full modeset.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-8-ville.syrjala@linux.intel.com
|
|
Follow the hsw+ approach toggle the audio presence detect
when we set up the ELD, instead of doing it when turning the
port on/off.
This will facilitate audio enable/disable to happen during
fastsets instead of requiring a full modeset.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-7-ville.syrjala@linux.intel.com
|
|
Put a wrapper around the intel_audio_codec_{enable,disable}()
calls in the g4x+ DP/HDMI code. We shall move the presence
detect enable/disable into the wrappers later.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-6-ville.syrjala@linux.intel.com
|
|
Push the audio enable/disable to be the last/first thing
respectively that is done in the encoder enable/disable hooks.
The goal is to move it further out of these encoder hooks entirely.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-5-ville.syrjala@linux.intel.com
|
|
Doing the if-else around RMWs is kinda silly. Just set/clear the
apporiate bits with a single RMW.
Also unify the coding style a bit icl_wa_cursorclkgating() while at it.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-4-ville.syrjala@linux.intel.com
|
|
We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.
Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
|
|
{planes,vrr}_{enabling,disabling}() are supposed to indicate
whether the specific hardware feature is supposed to be enabling
or disabling. That can only makes sense if the pipe is active
overall. So check for that before we go poking at the hardware.
I think we're semi-safe currently on due to:
- intel_pre_plane_update() doesn't get called when the pipe
was not-active prior to the commit, but this is actually a bug.
This saves vrr_disabling(), and vrr_enabling() is called from
deeper down where we have already checked hw.active.
- active_planes mirrors the crtc's hw.active
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com
|
|
Do not continue to psr2 checks if psr or panel replay is not supported.
Cc: Animesh Manna <animesh.manna@intel.com>
Fixes: b8cf5b5d266e ("drm/i915/panelreplay: Initializaton and compute config for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9670
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120130214.3332726-1-jouni.hogander@intel.com
|
|
entry_setup_frames variable is defined as u8. However, the
function call intel_psr_entry_setup_frames() can return
negative error code. There is a type mismatch here, so let's
switch to use int here as well.
Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116090512.480373-1-mika.kahola@intel.com
|
|
Drop unused vlv_iosf_sb_read() and vlv_iosf_sb_write().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-17-andriy.shevchenko@linux.intel.com
|
|
For a couple of cases the branches call the same bxt_gpio_set_value().
As Ville suggested they can be combined by dropping the DISPLAY_VER()
check from Gen 11 to Gen 9. Do it that way.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-16-andriy.shevchenko@linux.intel.com
|
|
It's a dirty hack in the driver that pokes GPIO registers behind
the driver's back. Moreoever it might be problematic as simultaneous
I/O may hang the system, see the commit 0bd50d719b00 ("pinctrl:
cherryview: prevent concurrent access to GPIO controllers") for
the details. Taking all this into consideration replace the hack
with proper GPIO APIs being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-15-andriy.shevchenko@linux.intel.com
|
|
Currently soc_gpio_set_value() supports only a single indexing for GPIO
pin. For CHV case, for example, we will need to distinguish community
based index from the one that VBT is using. Introduce an additional
parameter to soc_gpio_set_value() and its callers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-14-andriy.shevchenko@linux.intel.com
|
|
It's a dirty hack in the driver that pokes GPIO registers behind
the driver's back. Moreoever it might be problematic as simultaneous
I/O may hang the system, see the commit 40ecab551232 ("pinctrl:
baytrail: Really serialize all register accesses") for the details.
Taking all this into consideration replace the hack with proper
GPIO APIs being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-13-andriy.shevchenko@linux.intel.com
|
|
Extract a common soc_gpio_set_value() helper that may be used by a few
SoCs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-12-andriy.shevchenko@linux.intel.com
|
|
Fix wrong initial value for GPIOs in bxt_gpio_set_value().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-11-andriy.shevchenko@linux.intel.com
|
|
To properly deal with GPIOs used in MIPI panel sequences a temporary
GPIO lookup will be used. Since there can only be 1 GPIO lookup table
for the "0000:00:02.0" device this will not work if the GPIO lookup
table used by intel_dsi_vbt_gpio_init() is still registered.
After getting the "backlight" and "panel" GPIOs the lookup table
registered by intel_dsi_vbt_gpio_init() is no longer necessary,
remove it so that another temporary lookup-table for the "0000:00:02.0"
device can be added.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-10-andriy.shevchenko@linux.intel.com
|
|
Names of the MIPI sequence steps are sequential and defined, no
need to check for the gaps. However in seq_name the MIPI_SEQ_END
is missing. Add it there, and drop unneeded NULL check in
sequence_name().
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-9-andriy.shevchenko@linux.intel.com
|
|
In the snippets like the following
if (...)
return / goto / break / continue ...;
else
...
the 'else' is redundant. Get rid of it.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-8-andriy.shevchenko@linux.intel.com
|
|
Move existing condition to while(), so it will be clear on what
circumstances the loop is successfully finishing.
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-7-andriy.shevchenko@linux.intel.com
|
|
Drop the unused parameter.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-6-andriy.shevchenko@linux.intel.com
|
|
The lowest level functions are about setting GPIO values, not about
executing any sequences anymore.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-5-andriy.shevchenko@linux.intel.com
|
|
With the various sequence versions and pointer increments interleaved,
it's a bit hard to decipher what's going on. Add separate paths for
different sequence versions.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-4-andriy.shevchenko@linux.intel.com
|
|
Follow the contemporary conventions.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-3-andriy.shevchenko@linux.intel.com
|
|
Purely a guess. Drop the nop function.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-2-andriy.shevchenko@linux.intel.com
|
|
intel_link_compute_m_n()
Reuse intel_dp_max_data_rate() and intel_dp_effective_data_rate() in
intel_link_compute_m_n(), instead of open-coding the equivalent. Note
the kbit/sec -> kByte/sec unit change in the M/N values, but this not
reducing the precision, as the link rate value is based anyway on a less
precise 10 kbit/sec value.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116131841.1588781-12-imre.deak@intel.com
|