summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-01drm/amd/display: Stop waiting for vblank during pipe programmingMartin Leung
[why and how] This line was originally removed for a compliance issue, but then reverted as it caused a fringe underflow case. However, the addition of this line caused a underflow regression when subVP is on, and it needs to be removed again. We plan to fix subvp underflow and then re-add in this line. After that, we will investigate what to do next for the compliance issue. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Modify checks to enable TPS3 pattern when requiredIswara Nagulendran
[HOW&WHY] Checking if both DSC and FEC supported from sink and source before going with TPS3 pattern during link training. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Remove rate check from pixel rate divider updateTaimur Hassan
[Why] This check is not needed, and can cause CRC mismatch. [How] Remove check and early exit from divider update. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Check validation passed after applying pipe split changesDillon Varone
[WHY?] Validation can fail for configurations that were previously supported, by only changing parameters such as the DET allocations, which is currently unexpected. [HOW?] Add a check that validation passes after applying pipe split related changes. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Update DML formulaCharlene Liu
[why] This is to update SW DML implementation. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Don't enable ODM + MPOAlvin Lee
[Description] Driver doesn't support ODM + MPO Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Include virtual signal to set k1 and k2 valuesEric Bernstein
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: Reinit DPG when exiting dynamic ODMDillon Varone
[WHY] DPG must be returned to initialized state when pipe is disabled. [HOW] Reinit DPG on unused pipes when exiting dynamic ODM. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amd/display: drop vblank_lock from struct amdgpu_display_managerHamza Mahfooz
As of commit 09a5df6c444c ("drm/amd/display: Fix multi-display support for idle opt workqueue"), vblank_lock is no longer being used. So, don't init it in amdgpu_dm_init() and remove it from struct amdgpu_display_manager. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdkfd: Remove unused variableMa Jun
kfd_topology_device->cache_count is not used by other fucntions, so remove it. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip program gfxhub_v3_0_3 system aperture registers under SRIOVYifan Zha
[Why] gfxhub_v3_0_3 system aperture registers are removed from RLCG register access range. [How] Skip access gfxhub_v3_0_3 system aperture registers under SRIOV VF. These registers will be programmed on host side. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip access SDMA0_F32_CNTL in sdma_v6_0_enable under SRIOVYifan Zha
[Why] SDMA0_F32_CNTL is a PF_only regitser which will be blocked by L1. RLCG will not program the register as well. [How] Skip to program SDMA0_F32_CNTL under SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Skip access GRBM_CNTL under SRIOV on gfx_v11Yifan Zha
[Why] GRBM_CNTL is a PF_only register on gfx_v11. RLCG interface will return "out of range" under SRIOV VF. [How] Skip access GRBM_CNTL under gfx_v11 SRIOV VF. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Disable GPU reset on SRIOV before remove pci.Gavin Wan
The recent change brought a bug on SRIOV envrionment. It caused unloading amdgpu failed on Guest VM. The reason is that the VF FLR was requested while unloading amdgpu driver, but the VF FLR of SRIOV sequence is wrong while removing PCI device. For SRIOV, the guest driver should not trigger the whole XGMI hive to do the reset. Host driver control how the device been reset. Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-01drm/amdgpu: Enable GFX RAS feature for gfx v11_0_3Candice Li
v1: Support gfx ras feature enablement for gfx v11_0_3. v2: Update function name and error message. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Modify mismatched function nameJiapeng Chong
No functional modification involved. drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:615: warning: expecting prototype for setup_subvp_dmub_command(). Prototype was for populate_subvp_cmd_pipe_info() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2587 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: make wake_up_aux_channel staticJiapeng Chong
This symbol is not used outside of dc_link_dp.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:5230:16: warning: no previous prototype for function 'wake_up_aux_channel'. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2581 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdkfd: Cleanup kfd_dev structMukul Joshi
Cleanup kfd_dev struct by removing ddev and pdev as both drm_device and pci_dev can be fetched from amdgpu_device. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: disable GFXOFF during compute for GFX11Graham Sider
Temporary workaround to fix issues observed in some compute applications when GFXOFF is enabled on GFX11. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd: Fail the suspend if resources can't be evictedMario Limonciello
If a system does not have swap and memory is under 100% usage, amdgpu will fail to evict resources. Currently the suspend carries on proceeding to reset the GPU: ``` [drm] evicting device resources failed [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12 [drm] free PSP TMR buffer [TTM] Failed allocating page table [drm] evicting device resources failed amdgpu 0000:03:00.0: amdgpu: MODE1 reset amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset ``` At this point if the suspend actually succeeded I think that amdgpu would have recovered because the GPU would have power cut off and restored. However the kernel fails to continue the suspend from the memory pressure and amdgpu fails to run the "resume" from the aborted suspend. ``` ACPI: PM: Preparing to enter system sleep state S3 SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO) cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0 node 0: slabs: 22, objs: 1122, free: 0 ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651) [drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed! [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62 amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62). PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62 amdgpu 0000:03:00.0: PM: failed to resume async: error -62 ``` To avoid this series of unfortunate events, fail amdgpu's suspend when the memory eviction fails. This will let the system gracefully recover and the user can try suspend again when the memory pressure is relieved. Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27Revert "drm/amd/display: Limit max DSC target bpp for specific monitors"Hamza Mahfooz
This reverts commit 55eea8ef98641f6e1e1c202bd3a49a57c1dd4059. This quirk is now handled in the DRM core, so we can drop all of the internal code that was added to handle it. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: use max_dsc_bpp in amdgpu_dmHamza Mahfooz
Since, the quirk is handled in the DRM core now, we can use that value instead of the internal value. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/edid: add a quirk for two LG monitors to get them to work on 10bpcHamza Mahfooz
The LG 27GP950 and LG 27GN950 have visible display corruption when trying to use 10bpc modes. So, to fix this, cap their maximum DSC target bitrate to 15bpp. Suggested-by: Roman Li <roman.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Add EEPROM I2C address support for ip discoveryCandice Li
1. Update EEPROM_I2C_MADDR_SMU_13_0_0 to EEPROM_I2C_MADDR_54H 2. Add EEPROM I2C address support for smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Update ras eeprom support for smu v13_0_0 and v13_0_10Candice Li
Enable RAS EEPROM support for smu v13_0_0 and v13_0_10. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Optimize TA load/unload/invoke debugfs interfacesCandice Li
1. Add a function pointer structure ta_funcs to psp context 2. Make the interfaces generic to all TAs 3. Leverage exisitng TA context and remove unused functions 4. Fix return code bugs v2: Add comments for ta funcs macros and correct typo Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Optimize RAS TA initialization and TA unload funcsCandice Li
1. Save TA unload psp response status 2. Add RAS TA loading status check for initializaiton 3. Drop RAS context teardown to allow RAS TA to be reloaded Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Candice Li <candice.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()Yang Li
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: prevent memory leakgehao
In dce6(0,1,4)_create_resource_pool and dce80_create_resource_pool the allocated memory should be released if construct pool fails. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: gehao <gehao@kylinos.cn> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: move remaining FPU code to dml folderAo Zhong
pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_luma = 0; pipes[pipe_cnt].pipe.src.dcc_fraction_of_zs_req_chroma = 0; these two operations in dcn32/dcn32_resource.c still need to use FPU, This will cause compilation to fail on ARM64 platforms because -mgeneral-regs-only is enabled by default to disable the hardware FPU. Therefore, imitate the dcn31_zero_pipe_dcc_fraction function in dml/dcn31/dcn31_fpu.c, declare the dcn32_zero_pipe_dcc_fraction function in dcn32_fpu.c, and move above two operations into this function. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ao Zhong <hacc1225@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: move remaining FPU code to dml folderAo Zhong
In the process of enabling DCN support for arm64, I found that the dcn10_resource_construct_fp function in dcn10/dcn10_resource.c still needs to use FPU. This will cause compilation to fail on ARM64 platforms because -mgeneral-regs-only is enabled by default to disable the hardware FPU. So move dcn10_resource_construct_fp from dcn10 folder to dml/dcn10 folder to enable hardware FPU for that function. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Ao Zhong <hacc1225@gmail.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: remove deprecated MES version varsGraham Sider
MES scheduler and kiq versions are stored in mes.sched_version and mes.kiq_version, respectively, which are read from a register after their queues are initialized. Remove mes.ucode_fw_version and mes.data_fw_version which tried to read this versioning info from the firmware headers (which don't contain this information). Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: correct MES debugfs versionsGraham Sider
Use mes.sched_version, mes.kiq_version for debugfs as mes.ucode_fw_version does not contain correct versioning information. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: Move the mutex_lock to protect the return status of ↵Alan Liu
securedisplay command buffer [Why] Before we call psp_securedisplay_invoke(), we call psp_prep_securedisplay_cmd_buf() to prepare and initialize the command buffer. However, we didn't use the mutex_lock to protect the status of command buffer. So when multiple threads are using the command buffer, after thread A return from psp_securedisplay_invoke() and the command buffer status is set to SUCCESS, another thread B may call psp_prep_securedisplay_cmd_buf() and initialize the status to FAILURE again, and cause Thread A to get a failure return status. [How] Move the mutex_lock out of psp_securedisplay_invoke() to its caller to cover psp_prep_securedisplay_cmd_buf() and the code checking the return status of command buffer. Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: remove ras_error_status parameter for UMC poison handlerTao Zhou
Make the code simpler. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: add RAS poison handling for MCATao Zhou
For MCA poison, if unmap queue fails, only gpu reset should be triggered without page retirement handling, MCA notifier will do it. v2: handle MCA poison consumption in umc_poison_handler directly. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: use page retirement API in MCA notifierTao Zhou
Make the code more readable. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: add RAS page retirement functions for MCATao Zhou
Define page retirement functions for MCA platform. v2: remove page retirement handling from MCA poison handler, let MCA notifier do page retirement. v3: remove specific poison handler for MCA to simplify code. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdkfd: remove unused struct cdit_headerPaulo Miguel Almeida
struct cdit_header was never used across any of the amd drivers nor this is exposed to UAPI so it can be removed. This patch removes struct cdit_header and refactor code accordingly Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdkfd: remove unused kfd_pm4_headers_diq header filePaulo Miguel Almeida
kfd_pm4_headers_diq.h header is a leftover from the old H/W debugger module support added on commit fbeb661bfa895dc ("drm/amdkfd: Add skeleton H/W debugger module support"). That implementation was removed after a while and the last file that included that header was removed on commit 5bdd3eb253544b1 ("drm/amdkfd: Remove unused old debugger implementation"). This patch removes the unused header file kfd_pm4_headers_diq.h Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Filter Invalid 420 Modes for HDMI TMDSFangzhi Zuo
[Why] Invalidate unsupported 420 modes on HDMI TMDS. HDMI TMDS does not support ODM. Any modes that are horizontally wider than 4096, cannot be supported via TMDS. So they must be filtered out and should not pass validation. [How] Create fake plane for the new stream, and validate global state by going through dml validation routine. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Rework comments on dc fileRodrigo Siqueira
The file dc.c has multiple comments that do not follow the kernel-doc or are made in a distracting way. This commit alleviates part of this issue by reorganizing some comments inside the dc file. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: 3.2.209Aric Cyr
DC version 3.2.209 brings along the following: * Improve color manipulation * Add corrections to DML and some flag configuration * Updates for DCN32x * Expand kernel-doc Tested-by: Mark Broadworth <mark.broadworth@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amdgpu: set fb_modifiers_not_supported in vkmsYifan Zhang
This patch to fix the gdm3 start failure with virual display: /usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument /usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Add kernel doc for commit sequenceRodrigo Siqueira
Add basic kernel-doc that describes some of the struct and functions that are part of the DC commit sequence.. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Add kernel doc to some of the dc fieldsRodrigo Siqueira
Add kernel-doc to some important elements from DC struct that might help to understand DC sequence. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Add basic ODM descriptionRodrigo Siqueira
Add kernel-doc to some of the ODM-related functions. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Add DEC/CRB basic docRodrigo Siqueira
Add a kernel-doc to the DE-Tile function hook. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Expand kernel doc for DCRodrigo Siqueira
This commit adds extra documentation for elements related to FAMs. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-27drm/amd/display: Wrong colorimetry workaroundMa Hanghong
[Why] For FreeSync HDR, native color space flag in AMD VSIF(BT.709) should be used when intepreting content and color space flag in VSC or AVI infoFrame should be ignored. However, it turned out some userspace application still use color flag in VSC or AVI infoFrame which is incorrect. [How] Transfer function is used when building the VSC and AVI infoFrame. Set colorimetry to BT.709 when all the following match: 1. Pixel format is YCbCr; 2. In FreeSync 2 HDR, color is COLOR_SPACE_2020_YCBCR; 3. Transfer function is TRANSFER_FUNC_GAMMA_22; Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Ma Hanghong <hanghong.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 10:26:25 +0000