| Age | Commit message (Collapse) | Author |
|---|
|
In zap_pte_range(), if the pte lock was released midway, the pte entries
may be refilled with physical pages by another thread, which may cause a
non-empty PTE page to be reclaimed and eventually cause the system to
crash.
To fix it, fall back to the slow path in this case to recheck if all pte
entries are still none.
Link: https://lkml.kernel.org/r/20250211072625.89188-1-zhengqi.arch@bytedance.com
Fixes: 6375e95f381e ("mm: pgtable: reclaim empty PTE page in madvise(MADV_DONTNEED)")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/all/20250207-anbot-bankfilialen-acce9d79a2c7@brauner/
Reported-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Closes: https://lore.kernel.org/all/152296f3-5c81-4a94-97f3-004108fba7be@gmx.com/
Tested-by: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After adding "delay max" and "delay min" to the taskstats structure, the
taskstats version needs to be updated.
Link: https://lkml.kernel.org/r/20250208144901218Q5ptVpqsQkb2MOEmW4Ujn@zte.com.cn
Fixes: f65c64f311ee ("delayacct: add delay min to record delay peak")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
getdelays had a compilation issue because the format string was not
updated when the "delay min" was added. For example, after adding the
"delay min" in printf, there were 7 strings but only 6 "%s" format
specifiers. Similarly, after adding the 't->cpu_delay_total', there were
7 variables but only 6 format characters specifiers, causing compilation
issues as follows. This commit fixes these issues to ensure that
getdelays compiles correctly.
root@xx:~/linux-next/tools/accounting$ make
getdelays.c:199:9: warning: format `%llu' expects argument of type
`long long unsigned int', but argument 8 has type `char *' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
216 | "delay total", "delay average", "delay max", "delay min",
| ~~~~~~~~~~~
| |
| char *
getdelays.c:200:21: note: format string is defined here
200 | " %15llu%15llu%15llu%15llu%15.3fms%13.6fms\n"
| ~~~~~^
| |
| long long unsigned int
| %15s
getdelays.c:199:9: warning: format `%f' expects argument of type
`double', but argument 12 has type `long long unsigned int' [-Wformat=]
199 | printf("\n\nCPU %15s%15s%15s%15s%15s%15s\n"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.....
220 | (unsigned long long)t->cpu_delay_total,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long long unsigned int
.....
Link: https://lkml.kernel.org/r/20250208144400544RduNRhwIpT3m2JyRBqskZ@zte.com.cn
Fixes: f65c64f311ee ("delayacct: add delay min to record delay peak")
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: Qiang Tu <tu.qiang35@zte.com.cn>
Cc: wangyong <wang.yong12@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
migrate_device_finalize()
If migration succeeded, we called
folio_migrate_flags()->mem_cgroup_migrate() to migrate the memcg from the
old to the new folio. This will set memcg_data of the old folio to 0.
Similarly, if migration failed, memcg_data of the dst folio is left unset.
If we call folio_putback_lru() on such folios (memcg_data == 0), we will
add the folio to be freed to the LRU, making memcg code unhappy. Running
the hmm selftests:
# ./hmm-tests
...
# RUN hmm.hmm_device_private.migrate ...
[ 102.078007][T14893] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7ff27d200 pfn:0x13cc00
[ 102.079974][T14893] anon flags: 0x17ff00000020018(uptodate|dirty|swapbacked|node=0|zone=2|lastcpupid=0x7ff)
[ 102.082037][T14893] raw: 017ff00000020018 dead000000000100 dead000000000122 ffff8881353896c9
[ 102.083687][T14893] raw: 00000007ff27d200 0000000000000000 00000001ffffffff 0000000000000000
[ 102.085331][T14893] page dumped because: VM_WARN_ON_ONCE_FOLIO(!memcg && !mem_cgroup_disabled())
[ 102.087230][T14893] ------------[ cut here ]------------
[ 102.088279][T14893] WARNING: CPU: 0 PID: 14893 at ./include/linux/memcontrol.h:726 folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.090478][T14893] Modules linked in:
[ 102.091244][T14893] CPU: 0 UID: 0 PID: 14893 Comm: hmm-tests Not tainted 6.13.0-09623-g6c216bc522fd #151
[ 102.093089][T14893] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
[ 102.094848][T14893] RIP: 0010:folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.096104][T14893] Code: ...
[ 102.099908][T14893] RSP: 0018:ffffc900236c37b0 EFLAGS: 00010293
[ 102.101152][T14893] RAX: 0000000000000000 RBX: ffffea0004f30000 RCX: ffffffff8183f426
[ 102.102684][T14893] RDX: ffff8881063cb880 RSI: ffffffff81b8117f RDI: ffff8881063cb880
[ 102.104227][T14893] RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
[ 102.105757][T14893] R10: 0000000000000001 R11: 0000000000000002 R12: ffffc900236c37d8
[ 102.107296][T14893] R13: ffff888277a2bcb0 R14: 000000000000001f R15: 0000000000000000
[ 102.108830][T14893] FS: 00007ff27dbdd740(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
[ 102.110643][T14893] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 102.111924][T14893] CR2: 00007ff27d400000 CR3: 000000010866e000 CR4: 0000000000750ef0
[ 102.113478][T14893] PKRU: 55555554
[ 102.114172][T14893] Call Trace:
[ 102.114805][T14893] <TASK>
[ 102.115397][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.116547][T14893] ? __warn.cold+0x110/0x210
[ 102.117461][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.118667][T14893] ? report_bug+0x1b9/0x320
[ 102.119571][T14893] ? handle_bug+0x54/0x90
[ 102.120494][T14893] ? exc_invalid_op+0x17/0x50
[ 102.121433][T14893] ? asm_exc_invalid_op+0x1a/0x20
[ 102.122435][T14893] ? __wake_up_klogd.part.0+0x76/0xd0
[ 102.123506][T14893] ? dump_page+0x4f/0x60
[ 102.124352][T14893] ? folio_lruvec_lock_irqsave+0x10e/0x170
[ 102.125500][T14893] folio_batch_move_lru+0xd4/0x200
[ 102.126577][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.127505][T14893] __folio_batch_add_and_move+0x391/0x720
[ 102.128633][T14893] ? __pfx_lru_add+0x10/0x10
[ 102.129550][T14893] folio_putback_lru+0x16/0x80
[ 102.130564][T14893] migrate_device_finalize+0x9b/0x530
[ 102.131640][T14893] dmirror_migrate_to_device.constprop.0+0x7c5/0xad0
[ 102.133047][T14893] dmirror_fops_unlocked_ioctl+0x89b/0xc80
Likely, nothing else goes wrong: putting the last folio reference will
remove the folio from the LRU again. So besides memcg complaining, adding
the folio to be freed to the LRU is just an unnecessary step.
The new flow resembles what we have in migrate_folio_move(): add the dst
to the lru, remove migration ptes, unlock and unref dst.
Link: https://lkml.kernel.org/r/20250210161317.717936-1-david@redhat.com
Fixes: 8763cb45ab96 ("mm/migrate: new memory migration helper for use with device memory")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
musl-libc warns about the following:
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/errno.h:1:2: attention: #warning redirecting incorrect #include <sys/errno.h> to <errno.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/errno.h> to <errno.h>
| ^~~~~~~
/home/florian/dev/buildroot/output/arm64/rpi4-b/host/aarch64-buildroot-linux-musl/sysroot/usr/include/sys/fcntl.h:1:2: attention: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
include errno.h and fcntl.h directly.
Link: https://lkml.kernel.org/r/20250210200518.1137295-1-florian.fainelli@broadcom.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Map my old business email to personal email.
Link: https://lkml.kernel.org/r/20250205060457.53667-1-feng.tang@linux.alibaba.com
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Map past iterations of my e-mail addresses to the current one.
Link: https://lkml.kernel.org/r/20250205-jjohnson-mailmap-v1-1-269cb7b1710d@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a sanity check to madvise_dontneed_free() to address a corner case in
madvise where a race condition causes the current vma being processed to
be backed by a different page size.
During a madvise(MADV_DONTNEED) call on a memory region registered with a
userfaultfd, there's a period of time where the process mm lock is
temporarily released in order to send a UFFD_EVENT_REMOVE and let
userspace handle the event. During this time, the vma covering the
current address range may change due to an explicit mmap done concurrently
by another thread.
If, after that change, the memory region, which was originally backed by
4KB pages, is now backed by hugepages, the end address is rounded down to
a hugepage boundary to avoid data loss (see "Fixes" below). This rounding
may cause the end address to be truncated to the same address as the
start.
Make this corner case follow the same semantics as in other similar cases
where the requested region has zero length (ie. return 0).
This will make madvise_walk_vmas() continue to the next vma in the range
(this time holding the process mm lock) which, due to the prev pointer
becoming stale because of the vma change, will be the same hugepage-backed
vma that was just checked before. The next time madvise_dontneed_free()
runs for this vma, if the start address isn't aligned to a hugepage
boundary, it'll return -EINVAL, which is also in line with the madvise
api.
From userspace perspective, madvise() will return EINVAL because the start
address isn't aligned according to the new vma alignment requirements
(hugepage), even though it was correctly page-aligned when the call was
issued.
Link: https://lkml.kernel.org/r/20250203075206.1452208-1-rcn@igalia.com
Fixes: 8ebe0a5eaaeb ("mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs")
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Florent Revest <revest@google.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()")
skips charging any zswap entries when it failed to zswap the entire folio.
However, when some base pages are zswapped but it failed to zswap the
entire folio, the zswap operation is rolled back. When freeing zswap
entries for those pages, zswap_entry_free() uncharges the zswap entries
that were not previously charged, causing zswap charging to become
inconsistent.
This inconsistency triggers two warnings with following steps:
# On a machine with 64GiB of RAM and 36GiB of zswap
$ stress-ng --bigheap 2 # wait until the OOM-killer kills stress-ng
$ sudo reboot
The two warnings are:
in mm/memcontrol.c:163, function obj_cgroup_release():
WARN_ON_ONCE(nr_bytes & (PAGE_SIZE - 1));
in mm/page_counter.c:60, function page_counter_cancel():
if (WARN_ONCE(new < 0, "page_counter underflow: %ld nr_pages=%lu\n",
new, nr_pages))
zswap_stored_pages also becomes inconsistent in the same way.
As suggested by Kanchana, increment zswap_stored_pages and charge zswap
entries within zswap_store_page() when it succeeds. This way,
zswap_entry_free() will decrement the counter and uncharge the entries
when it failed to zswap the entire folio.
While this could potentially be optimized by batching objcg charging and
incrementing the counter, let's focus on fixing the bug this time and
leave the optimization for later after some evaluation.
After resolving the inconsistency, the warnings disappear.
[42.hyeyoo@gmail.com: refactor zswap_store_page()]
Link: https://lkml.kernel.org/r/20250131082037.2426-1-42.hyeyoo@gmail.com
Link: https://lkml.kernel.org/r/20250129100844.2935-1-42.hyeyoo@gmail.com
Fixes: b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()")
Co-developed-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
import_iovec() says that it should always be fine to kfree the iovec
returned in @iovp regardless of the error code. __import_iovec_ubuf()
never reallocates it and thus should clear the pointer even in cases when
copy_iovec_*() fail.
Link: https://lkml.kernel.org/r/378ae26923ffc20fd5e41b4360d673bf47b1775b.1738332461.git.asml.silence@gmail.com
Fixes: 3b2deb0e46da ("iov_iter: import single vector iovecs as ITER_UBUF")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unlock vmcore_mutex when returning -EBUSY.
Link: https://lkml.kernel.org/r/20250129222003.1495713-1-bvanassche@acm.org
Fixes: 0f3b1c40c652 ("fs/proc/vmcore: disallow vmcore modifications while the vmcore is open")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan he <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
ice, iavf: Add support for Rx timestamping
Mateusz Polchlopek says:
Initially, during VF creation it registers the PTP clock in
the system and negotiates with PF it's capabilities. In the
meantime the PF enables the Flexible Descriptor for VF.
Only this type of descriptor allows to receive Rx timestamps.
Enabling virtual clock would be possible, though it would probably
perform poorly due to the lack of direct time access.
Enable timestamping should be done using userspace tools, e.g.
hwstamp_ctl -i $VF -r 14
In order to report the timestamps to userspace, the VF extends
timestamp to 40b.
To support this feature the flexible descriptors and PTP part
in iavf driver have been introduced.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add support for Rx timestamps to hotpath
iavf: handle set and get timestamps ops
iavf: Implement checking DD desc field
iavf: refactor iavf_clean_rx_irq to support legacy and flex descriptors
iavf: define Rx descriptors as qwords
libeth: move idpf_rx_csum_decoded and idpf_rx_extracted
iavf: periodically cache PHC time
iavf: add support for indirect access to PHC time
iavf: add initial framework for registering PTP clock
iavf: negotiate PTP capabilities
iavf: add support for negotiating flexible RXDID format
virtchnl: add enumeration for the rxdid format
ice: support Rx timestamp on flex descriptor
virtchnl: add support for enabling PTP on iAVF
====================
Link: https://patch.msgid.link/20250214192739.1175740-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add TSO support to the driver. Device can handle unencapsulated or
IPv6-in-IPv6 packets. Any other tunnel stacks are handled with
GSO partial.
Validate that the packet can be offloaded in ndo_features_check.
Main thing we need to check for is that the header geometry can
be expressed in the decriptor fields (offsets aren't too large).
Report number of TSO super-packets via the qstat API.
Link: https://patch.msgid.link/20250216174109.2808351-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir implemented the MAC merge support and reviews all
the new driver implementations.
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250215225200.2652212-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Could be just me, but I had to pause and double check that the Tx csum
counter in qstat should include GSO'd packets. GSO pretty much implies
csum so one could possibly interpret the csum counter as pure csum offload.
But the counters are based on virtio:
[tx_needs_csum]
The number of packets which require checksum calculation by the device.
[rx_needs_csum]
The number of packets with VIRTIO_NET_HDR_F_NEEDS_CSUM.
and VIRTIO_NET_HDR_F_NEEDS_CSUM gets set on GSO packets virtio sends.
Clarify this in the spec to avoid any confusion.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250214224601.2271201-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Gal points out that the comment now belongs further down, since
the original if condition was split into two in
commit de7f7582dff2 ("net: ethtool: prevent flow steering to RSS contexts which don't exist")
Link: https://lore.kernel.org/de4a2a8a-1eb9-4fa8-af87-7526e58218e9@nvidia.com
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250214224340.2268691-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Joe Damato says:
====================
netdev-genl: Add an xsk attribute to queues
This is an attempt to followup on something Jakub asked me about [1],
adding an xsk attribute to queues and more clearly documenting which
queues are linked to NAPIs...
After the RFC [2], Jakub suggested creating an empty nest for queues
which have a pool, so I've adjusted this version to work that way.
The nest can be extended in the future to express attributes about XSK
as needed. Queues which are not used for AF_XDP do not have the xsk
attribute present.
I've run the included test on:
- my mlx5 machine (via NETIF=)
- without setting NETIF
And the test seems to pass in both cases.
[1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/
[2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/
====================
Link: https://patch.msgid.link/20250214211255.14194-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that queues which are used for AF_XDP have the xsk nest attribute.
The attribute is currently empty, but its existence means the AF_XDP is
being used for the queue. Enable CONFIG_XDP_SOCKETS for
selftests/drivers/net tests, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Creating empty nests is helpful when the exact attributes to be exposed
in the future are not known. Encapsulate the logic in a helper.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce tests to verify the correct functionality of the SO_RCVMARK and
SO_RCVPRIORITY socket options.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250214205828.48503-1-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 6597e8d35851 ("netdev-genl: Elide napi_id when not present"),
napi_id_valid function was added. Use the helper to refactor open-coded
checks in the source.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefano Jordhani <sjordhani@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk> # for iouring
Link: https://patch.msgid.link/20250214181801.931-1-sjordhani@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'net-phy-dp83822-add-support-for-changing-the-transmit-amplitude-voltage'
Dimitri Fedrau via says:
====================
net: phy: dp83822: Add support for changing the transmit amplitude voltage
Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
Add support for configuration via DT.
v4: https://lore.kernel.org/20250211-dp83822-tx-swing-v4-0-1e8ebd71ad54@liebherr.com
v3: https://lore.kernel.org/20250204-dp83822-tx-swing-v3-0-9798e96500d9@liebherr.com
v2: https://lore.kernel.org/20250120-dp83822-tx-swing-v2-0-07c99dc42627@liebherr.com
v1: https://lore.kernel.org/20250113-dp83822-tx-swing-v1-0-7ed5a9d80010@liebherr.com
====================
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-0-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-3-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helper which returns the tx amplitude gain defined in device tree.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-2-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add property tx-amplitude-100base-tx-percent in the device tree bindings
for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
necessary to compensate losses on the PCB and connector, so the voltages
measured on the RJ45 pins are conforming.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-1-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set.
Fixes: 8c81ba20349d ("net/smc: De-tangle ism and smc device initialization")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214120137.563409-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzkaller reports the following bug:
BUG: spinlock bad magic on CPU#1, syz-executor.0/7995
lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x119/0x179 lib/dump_stack.c:118
debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline]
do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline]
_raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159
reset_per_cpu_data+0xe6/0x240 [drop_monitor]
net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor]
genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739
genl_family_rcv_msg net/netlink/genetlink.c:783 [inline]
genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800
netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497
genl_rcv+0x29/0x40 net/netlink/genetlink.c:811
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec net/socket.c:651 [inline]
__sock_sendmsg+0x157/0x190 net/socket.c:663
____sys_sendmsg+0x712/0x870 net/socket.c:2378
___sys_sendmsg+0xf8/0x170 net/socket.c:2432
__sys_sendmsg+0xea/0x1b0 net/socket.c:2461
do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x62/0xc7
RIP: 0033:0x7f3f9815aee9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9
RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007
RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768
If drop_monitor is built as a kernel module, syzkaller may have time
to send a netlink NET_DM_CMD_START message during the module loading.
This will call the net_dm_monitor_start() function that uses
a spinlock that has not yet been initialized.
To fix this, let's place resource initialization above the registration
of a generic netlink family.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250213152054.2785669-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes a grammatical error in a test log message
in reuseaddr_ports_exhausted.c for better clarity.
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213152612.4434-1-pranav.tyagi03@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tariq Toukan says:
====================
mlx5: Add sensor name in temperature message
This small series from Shahar adds the sensors names to the temperature
event messages, in addition to the existing bitmap indicators.
This improves human readability.
Series starts with simple refactoring and modifications. The top patch
adds the sensors names.
====================
Link: https://patch.msgid.link/20250213094641.226501-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, a temperature event message included a bitmap indicating
which sensors detect high temperatures.
To enhance clarity, we modify the message format to explicitly list
the names of the overheating sensors, alongside the sensors bitmap.
If HWMON is not configured, the event message remains unchanged.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213094641.226501-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the sensor_count field of the MTEWE register, bits 1-62 are
supported only for unmanaged switches, not for NICs, and bit 63
is reserved for internal use.
To prevent confusing output that may include set bits that are
not relevant to NIC sensors, we update the bitmask to retain only
the first bit, which corresponds to the sensor ASIC.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepend '0x' to the sensor bitmap in the warning message to clearly
indicate that the bitmap is in hexadecimal format.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap the high temperature warning in a temperature event with
a call to net_ratelimit() to prevent flooding the kernel log
with repeated warning messages when temperature exceeds the
threshold multiple times within a short duration.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sky Huang says:
====================
net: phy: mediatek: Add token-ring helper functions
This patchset add token-ring helper functions and moves some macros from
mtk-ge.c into mtk-phy-lib.c.
v2: https://lore.kernel.org/20250116012159.3816135-2-SkyLake.Huang@mediatek.com
====================
Link: https://patch.msgid.link/20250213080553.921434-1-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move some macros to phy-lib because MediaTek's 2.5G built-in
ethernet PHY will also use them.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-6-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to __mtk_tr_set_bits() support. Previously in mtk-ge-soc.c,
we clear some register bits via token ring, which were also implemented
in three __phy_write(). Now we can do the same thing via
__mtk_tr_clr_bits() helper.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-5-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously in mtk-ge-soc.c, we set some register bits via token
ring, which were implemented in three __phy_write().
Now we can do the same thing via __mtk_tr_set_bits() helper.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-4-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds TR(token ring) manipulations and adds correct
macro names for those magic numbers. TR is a way to access
proprietary registers on page 52b5. Use these helper functions
so we can see which fields we're going to modify/set/clear.
TR functions with __* prefix mean that the operations inside
aren't wrapped by page select/restore functions.
This patch doesn't really change registers' settings but just
enhances readability and maintainability.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-3-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace magic number with more meaningful macros in mtk-ge.c.
Also, move some common macros into mtk-phy-lib.c.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-2-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Place register number definitions immediately above their field
definitions and order by register number.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tjblS-00448F-8v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"It was reported that the acct(2) system call can be used to trigger a
NULL deref in cases where it is set to write to a file that triggers
an internal lookup.
This can e.g., happen when pointing acct(2) to /sys/power/resume. At
the point the where the write to this file happens the calling task
has already exited and called exit_fs() but an internal lookup might
be triggered through lookup_bdev(). This may trigger a NULL-deref when
accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
Also block access to kernel internal filesystems as well as procfs and
sysfs in the first place.
Various fixes for netfslib:
- Fix a number of read-retry hangs, including:
- Incorrect getting/putting of references on subreqs as we retry
them
- Failure to track whether a last old subrequest in a retried set
is superfluous
- Inconsistency in the usage of wait queues used for subrequests
(ie. using clear_and_wake_up_bit() whilst waiting on a private
waitqueue)
- Add stats counters for retries and publish in /proc/fs/netfs/stats.
This is not a fix per se, but is useful in debugging and shouldn't
otherwise change the operation of the code
- Fix the ordering of queuing subrequests with respect to setting the
request flag that says we've now queued them all"
* tag 'vfs-6.14-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix setting NETFS_RREQ_ALL_QUEUED to be after all subreqs queued
netfs: Add retry stat counters
netfs: Fix a number of read-retry hangs
acct: block access to kernel internal filesystems
acct: perform last write from workqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Couple of patches to fix KASAN failduring boot
- Fix to avoid warnings/errors when building with 4k page size
Thanks to Christophe Leroy, Ritesh Harjani (IBM), and Erhard Furtner
* tag 'powerpc-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC
powerpc/64s: Rewrite __real_pte() and __rpte_to_hidx() as static inline
powerpc/code-patching: Disable KASAN report during patching via temporary mm
|
|
When a destination client is a user client in the legacy MIDI mode and
it sets the no-UMP-conversion flag, currently the all UMP events are
still passed as-is. But this may confuse the user-space, because the
event packet size is different from the legacy mode.
Since we cannot handle UMP events in user clients unless it's running
in the UMP client mode, we should filter out those events instead of
accepting blindly. This patch addresses it by slightly adjusting the
conditions for UMP event handling at the event delivery time.
Fixes: 329ffe11a014 ("ALSA: seq: Allow suppressing UMP conversions")
Link: https://lore.kernel.org/b77a2cd6-7b59-4eb0-a8db-22d507d3af5f@gmail.com
Link: https://patch.msgid.link/20250217170034.21930-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Allows the LED on the dedicated mute button on the HP ProBook 450 G4
laptop to change colour correctly.
Signed-off-by: John Veness <john-linux@pelago.org.uk>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/2fb55d48-6991-4a42-b591-4c78f2fad8d7@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the user sets a file or directory as read-only (e.g. ~S_IWUGO),
the client will set the ATTR_READONLY attribute by sending an
SMB2_SET_INFO request to the server in cifs_setattr_{,nounix}(), but
cifsInodeInfo::cifsAttrs will be left unchanged as the client will
only update the new file attributes in the next call to
{smb311_posix,cifs}_get_inode_info() with the new metadata filled in
@data parameter.
Commit a18280e7fdea ("smb: cilent: set reparse mount points as
automounts") mistakenly removed the @data NULL check when calling
is_inode_cache_good(), which broke the above case as the new
ATTR_READONLY attribute would end up not being updated on files with a
read lease.
Fix this by updating the inode whenever we have cached metadata in
@data parameter.
Reported-by: Horst Reiterer <horst.reiterer@fabasoft.com>
Closes: https://lore.kernel.org/r/85a16504e09147a195ac0aac1c801280@fabasoft.com
Fixes: a18280e7fdea ("smb: cilent: set reparse mount points as automounts")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
|
