summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-23drm: qxl: Delay entering atomic context during cursor updateGabriel Krisman Bertazi
qxl_release_map will enter an atomic context, but since we still need to alloc memory for BOs, we better delay that until we have everything we need, in case we need to sleep inside the allocation. This avoids the Sleep in atomic state below, which was reported by Mike. [ 43.910362] BUG: sleeping function called from invalid context at mm/slab.h:432 [ 43.910955] in_atomic(): 1, irqs_disabled(): 0, pid: 2077, name: Xorg [ 43.911472] Preemption disabled at: [ 43.911478] [<ffffffffa02b1c45>] qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.912103] CPU: 0 PID: 2077 Comm: Xorg Tainted: G E 4.12.0-master #38 [ 43.912550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20161202_174313-build11a 04/01/2014 [ 43.913202] Call Trace: [ 43.913371] dump_stack+0x65/0x89 [ 43.913581] ? qxl_bo_kmap_atomic_page+0xa5/0x100 [qxl] [ 43.913876] ___might_sleep+0x11a/0x190 [ 43.914095] __might_sleep+0x4a/0x80 [ 43.914319] ? qxl_bo_create+0x50/0x190 [qxl] [ 43.914565] kmem_cache_alloc_trace+0x46/0x180 [ 43.914836] qxl_bo_create+0x50/0x190 [qxl] [ 43.915082] ? refcount_dec_and_test+0x11/0x20 [ 43.915332] ? ttm_mem_io_reserve+0x41/0xe0 [ttm] [ 43.915595] qxl_alloc_bo_reserved+0x37/0xb0 [qxl] [ 43.915884] qxl_cursor_atomic_update+0x8f/0x260 [qxl] [ 43.916172] ? drm_atomic_helper_update_legacy_modeset_state+0x1d6/0x210 [drm_kms_helper] [ 43.916623] drm_atomic_helper_commit_planes+0xec/0x230 [drm_kms_helper] [ 43.916995] drm_atomic_helper_commit_tail+0x2b/0x60 [drm_kms_helper] [ 43.917398] commit_tail+0x65/0x70 [drm_kms_helper] [ 43.917693] drm_atomic_helper_commit+0xa9/0x100 [drm_kms_helper] [ 43.918039] drm_atomic_commit+0x4b/0x50 [drm] [ 43.918334] drm_atomic_helper_update_plane+0xf1/0x110 [drm_kms_helper] [ 43.918902] __setplane_internal+0x19f/0x280 [drm] [ 43.919240] drm_mode_cursor_universal+0x101/0x1c0 [drm] [ 43.919541] drm_mode_cursor_common+0x15b/0x1d0 [drm] [ 43.919858] drm_mode_cursor2_ioctl+0xe/0x10 [drm] [ 43.920157] drm_ioctl+0x211/0x460 [drm] [ 43.920383] ? drm_mode_cursor_ioctl+0x50/0x50 [drm] [ 43.920664] ? handle_mm_fault+0x93/0x160 [ 43.920893] do_vfs_ioctl+0x96/0x6e0 [ 43.921117] ? __fget+0x73/0xa0 [ 43.921322] SyS_ioctl+0x41/0x70 [ 43.921545] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 43.922188] RIP: 0033:0x7f1145804bc7 [ 43.922526] RSP: 002b:00007ffcd3e50508 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 [ 43.923367] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007f1145804bc7 [ 43.923852] RDX: 00007ffcd3e50540 RSI: 00000000c02464bb RDI: 000000000000000b [ 43.924299] RBP: 0000000000000040 R08: 0000000000000040 R09: 000000000000000c [ 43.924694] R10: 00007ffcd3e50340 R11: 0000000000003246 R12: 0000000000000018 [ 43.925128] R13: 00000000022bc390 R14: 0000000000000040 R15: 00007ffcd3e5062c Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170519175819.15682-1-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-23ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430Alexander Tsoy
This model is actually called 92XXM2-8 in Windows driver. But since pin configs for M22 and M28 are identical, just reuse M22 quirk. Fixes external microphone (tested) and probably docking station ports (not tested). Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a regression in the skcipher interface that allows bogus key parameters to hit underlying implementations which can cause crashes" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Add missing API setkey checks
2017-05-22Merge tag 'pstore-v4.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fix from Kees Cook: "Marta noticed another misbehavior in EFI pstore, which this fixes. Hopefully this is the last of the v4.12 fixes for pstore!" * tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: efi-pstore: Fix write/erase id tracking
2017-05-22Merge tag 'acpi-4.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a 4.11 change that turned out to be problematic and add a .gitignore file. Specifics: - Revert a 4.11 commit related to the ACPI-based handling of laptop lids that made changes incompatible with existing user space stacks and broke things there (Lv Zheng). - Add .gitignore to the ACPI tools directory (Prarit Bhargava)" * tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / button: Remove lid_init_state=method mode" tools/power/acpi: Add .gitignore file
2017-05-22Merge tag 'pm-4.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix RTC wakeup from suspend-to-idle broken recently, fix CPU idleness detection condition in the schedutil cpufreq governor, fix a cpufreq driver build failure, fix an error code path in the power capping framework, clean up the hibernate core and update the intel_pstate documentation. Specifics: - Fix RTC wakeup from suspend-to-idle broken by the recent rework of ACPI wakeup handling (Rafael Wysocki). - Update intel_pstate driver documentation to reflect the current code and explain how it works in more detail (Rafael Wysocki). - Fix an issue related to CPU idleness detection on systems with shared cpufreq policies in the schedutil governor (Juri Lelli). - Fix a possible build issue in the dbx500 cpufreq driver (Arnd Bergmann). - Fix a function in the power capping framework core to return an error code instead of 0 when there's an error (Dan Carpenter). - Clean up variable definition in the hibernation core (Pushkar Jambhlekar)" * tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: dbx500: add a Kconfig symbol PM / hibernate: Declare variables as static PowerCap: Fix an error code in powercap_register_zone() RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() cpufreq: intel_pstate: Document the current behavior and user interface cpufreq: schedutil: use now as reference when aggregating shared policy requests
2017-05-22i2c: designware: Fix bogus sda_hold_time due to uninitialized varsJan Kiszka
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Fixes: 9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-22Input: atmel_mxt_ts - add T100 as a readable objectMaxime Roussin-Bélanger
When using the 'object' sysfs attribute, T100 is not displayed in the output. Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-22Input: edt-ft5x06 - increase allowed data range for threshold parameterMartin Kepplinger
The datasheet and application note does not mention an allowed range for the M09_REGISTER_THRESHOLD parameter. One of our customers needs to set lower values than 20 and they seem to work just fine on EDT EP0xx0M09 with T5x06 touch. So, lacking a known lower limit, we increase the range for thresholds, and set the lower limit to 0. The documentation is updated accordingly. Signed-off-by: Schoefegger Stefan <stefan.schoefegger@ginzinger.com> Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-22efi-pstore: Fix write/erase id trackingKees Cook
Prior to the pstore interface refactoring, the "id" generated during a backend pstore_write() was only retained by the internal pstore inode tracking list. Additionally the "part" was ignored, so EFI would encode this in the id. This corrects the misunderstandings and correctly sets "id" during pstore_write(), and uses "part" directly during pstore_erase(). Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Fixes: 76cc9580e3fb ("pstore: Replace arguments for write() API") Fixes: a61072aae693 ("pstore: Replace arguments for erase() API") Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
2017-05-22PCI: imx6: Fix config read timeout handlingLucas Stach
Commit cc7b0d495589 ("PCI: designware: Update PCI config space remap function") made PCI configuration requests non-posted, which means we now get a synchronous abort when the CFG space read to probe for downstream devices times out. Synchronous aborts need to be handled differently from the async aborts we were getting before, in particular the PC needs to be advanced when resolving the abort. This is mostly a copy of what other PCI drivers do on ARM to handle those aborts. [bhelgaas: changelog, "Fixes"] Fixes: cc7b0d495589 ("PCI: designware: Update PCI config space remap function") Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2017-05-22switchtec: Fix minor bug with partition ID registerLogan Gunthorpe
When a switch endpoint is configured without NTB, the mmio_ntb registers will read all zeros. However, in corner case configurations where the partition ID is not zero and NTB is not enabled, the code will have the wrong partition ID and this causes the driver to use the wrong set of drivers. To fix this we simply take the partition ID from the system info region. Reported-by: Dingbao Chen <dingbao.chen@microsemi.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-05-22switchtec: Use new cdev_device_add() helper functionLogan Gunthorpe
Convert from "cdev_add() + device_add()" to cdev_device_add(), and from "device_del() + cdev_del()" to cdev_device_del(). [bhelgaas: changelog] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-05-22PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `__pci_epc_create': (.text+0xef4e): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `pci_epc_add_epf': (.text+0xf676): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `pci_epf_alloc_space': (.text+0xfa32): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `pci_epf_free_space': (.text+0xfac4): undefined reference to `bad_dma_ops' Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-05-22blk-throttle: force user to configure all settings for io.lowShaohua Li
Default value of io.low limit is 0. If user doesn't configure the limit, last patch makes cgroup be throttled to very tiny bps/iops, which could stall the system. A cgroup with default settings of io.low limit really means nothing, so we force user to configure all settings, otherwise io.low limit doesn't take effect. With this stragety, default setting of latency/idle isn't important, so just set them to very conservative and safe value. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-throttle: respect 0 bps/iops settings for io.lowShaohua Li
If a cgroup with low limit 0 for both bps/iops, the cgroup's low limit is ignored and we throttle the cgroup with its max limit. In this way, other cgroups with a low limit will not get protected. To fix this, we don't do the exception any more. cgroup will be throttled to a limit 0 if it uese default setting. To avoid completed stall, we give such cgroup tiny IO resources. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-throttle: output some debug info in traceShaohua Li
These info are important to understand what's happening and help debug. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22blk-throttle: add hierarchy support for latency target and idle timeShaohua Li
For idle time, children's setting should not be bigger than parent's. For latency target, children's setting should not be smaller than parent's. The leaf nodes will adjust their settings according to the hierarchy and compare their IO with the settings and do upgrade/downgrade. parents nodes don't need to track their IO latency/idle time. Signed-off-by: Shaohua Li <shli@fb.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-22kthread: Fix use-after-free if kthread fork failsVegard Nossum
If a kthread forks (e.g. usermodehelper since commit 1da5c46fa965) but fails in copy_process() between calling dup_task_struct() and setting p->set_child_tid, then the value of p->set_child_tid will be inherited from the parent and get prematurely freed by free_kthread_struct(). kthread() - worker_thread() - process_one_work() | - call_usermodehelper_exec_work() | - kernel_thread() | - _do_fork() | - copy_process() | - dup_task_struct() | - arch_dup_task_struct() | - tsk->set_child_tid = current->set_child_tid // implied | - ... | - goto bad_fork_* | - ... | - free_task(tsk) | - free_kthread_struct(tsk) | - kfree(tsk->set_child_tid) - ... - schedule() - __schedule() - wq_worker_sleeping() - kthread_data(task)->flags // UAF The problem started showing up with commit 1da5c46fa965 since it reused ->set_child_tid for the kthread worker data. A better long-term solution might be to get rid of the ->set_child_tid abuse. The comment in set_kthread_struct() also looks slightly wrong. Debugged-by: Jamie Iles <jamie.iles@oracle.com> Fixes: 1da5c46fa965 ("kthread: Make struct kthread kmalloc'ed") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jamie Iles <jamie.iles@oracle.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170509073959.17858-1-vegard.nossum@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-22futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()Peter Zijlstra
Markus reported that the glibc/nptl/tst-robustpi8 test was failing after commit: cfafcd117da0 ("futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()") The following trace shows the problem: ld-linux-x86-64-2161 [019] .... 410.760971: SyS_futex: 00007ffbeb76b028: 80000875 op=FUTEX_LOCK_PI ld-linux-x86-64-2161 [019] ...1 410.760972: lock_pi_update_atomic: 00007ffbeb76b028: curval=80000875 uval=80000875 newval=80000875 ret=0 ld-linux-x86-64-2165 [011] .... 410.760978: SyS_futex: 00007ffbeb76b028: 80000875 op=FUTEX_UNLOCK_PI ld-linux-x86-64-2165 [011] d..1 410.760979: do_futex: 00007ffbeb76b028: curval=80000875 uval=80000875 newval=80000871 ret=0 ld-linux-x86-64-2165 [011] .... 410.760980: SyS_futex: 00007ffbeb76b028: 80000871 ret=0000 ld-linux-x86-64-2161 [019] .... 410.760980: SyS_futex: 00007ffbeb76b028: 80000871 ret=ETIMEDOUT Task 2165 does an UNLOCK_PI, assigning the lock to the waiter task 2161 which then returns with -ETIMEDOUT. That wrecks the lock state, because now the owner isn't aware it acquired the lock and removes the pending robust list entry. If 2161 is killed, the robust list will not clear out this futex and the subsequent acquire on this futex will then (correctly) result in -ESRCH which is unexpected by glibc, triggers an internal assertion and dies. Task 2161 Task 2165 rt_mutex_wait_proxy_lock() timeout(); /* T2161 is still queued in the waiter list */ return -ETIMEDOUT; futex_unlock_pi() spin_lock(hb->lock); rtmutex_unlock() remove_rtmutex_waiter(T2161); mark_lock_available(); /* Make the next waiter owner of the user space side */ futex_uval = 2161; spin_unlock(hb->lock); spin_lock(hb->lock); rt_mutex_cleanup_proxy_lock() if (rtmutex_owner() !== current) ... return FAIL; .... return -ETIMEOUT; This means that rt_mutex_cleanup_proxy_lock() needs to call try_to_take_rt_mutex() so it can take over the rtmutex correctly which was assigned by the waker. If the rtmutex is owned by some other task then this call is harmless and just confirmes that the waiter is not able to acquire it. While there, fix what looks like a merge error which resulted in rt_mutex_cleanup_proxy_lock() having two calls to fixup_rt_mutex_waiters() and rt_mutex_wait_proxy_lock() not having any. Both should have one, since both potentially touch the waiter list. Fixes: 38d589f2fd08 ("futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Bug-Spotted-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Florian Weimer <fweimer@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Link: http://lkml.kernel.org/r/20170519154850.mlomgdsd26drq5j6@hirez.programming.kicks-ass.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Mostly netfilter bug fixes in here, but we have some bits elsewhere as well. 1) Don't do SNAT replies for non-NATed connections in IPVS, from Julian Anastasov. 2) Don't delete conntrack helpers while they are still in use, from Liping Zhang. 3) Fix zero padding in xtables's xt_data_to_user(), from Willem de Bruijn. 4) Add proper RCU protection to nf_tables_dump_set() because we cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From Liping Zhang. 5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang. 6) smsc95xx devices can't handle IPV6 checksums fully, so don't advertise support for offloading them. From Nisar Sayed. 7) Fix out-of-bounds access in __ip6_append_data(), from Eric Dumazet. 8) Make atl2_probe() propagate the error code properly on failures, from Alexey Khoroshilov. 9) arp_target[] in bond_check_params() is used uninitialized. This got changes from a global static to a local variable, which is how this mistake happened. Fix from Jarod Wilson. 10) Fix fallout from unnecessary NULL check removal in cls_matchall, from Jiri Pirko. This is definitely brown paper bag territory..." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: sched: cls_matchall: fix null pointer dereference vsock: use new wait API for vsock_stream_sendmsg() bonding: fix randomly populated arp target array net: Make IP alignment calulations clearer. bonding: fix accounting of active ports in 3ad net: atheros: atl2: don't return zero on failure path in atl2_probe() ipv6: fix out of bound writes in __ip6_append_data() bridge: start hello_timer when enabling KERNEL_STP in br_stp_start smsc95xx: Support only IPv4 TCP/UDP csum offload arp: always override existing neigh entries with gratuitous ARP arp: postpone addr_type calculation to as late as possible arp: decompose is_garp logic into a separate function arp: fixed error in a comment tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0 netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT ebtables: arpreply: Add the standard target sanity check netfilter: nf_tables: revisit chain/object refcounting from elements netfilter: nf_tables: missing sanitization in data from userspace netfilter: nf_tables: can't assume lock is acquired when dumping set elems netfilter: synproxy: fix conntrackd interaction ...
2017-05-22leds: pca955x: Correct I2C FunctionalityTin Huynh
The driver checks an incorrect flag of functionality of adapter. When a driver requires i2c_smbus_read_byte_data and i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA instead I2C_FUNC_I2C. This patch fixes the problem. Signed-off-by: Tin Huynh <tnhuynh@apm.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-05-22nvme_fc: remove extra controller reference taken on reconnectJames Smart
fix extra controller reference taken on reconnect by moving reference to initial controller create Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme_fc: correct nvme status set on abortJames Smart
correct nvme status set on abort. Patch that changed status to being actual nvme status crossed in the night with the patch that added abort values. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme_fc: set logging level on resets/deletesJames Smart
Per the review by Sagi on: http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html Looked at existing warn vs info vs err dev_xxx levels for the messages printed on reconnects and deletes: - Resets due to error and resets transitioned to deletes are dev_warn - Other reset/disconnect messages are dev_info - Removed chatty io queue related messages Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme_fc: revise comment on teardownJames Smart
Per the recommendation by Sagi on: http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html An extra reference was pointed out. There's no issue with the references, but rather a literal interpretation of what the comment is saying. Reword the comment to avoid confusion. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme_fc: Support ctrl_loss_tmoJames Smart
Sync with Sagi's recent addition of ctrl_loss_tmo in the core fabrics layer. Remove local connect limits and connect_attempts variable. Use fabrics new nr_connects variable and use of nvmf_should_reconnect() Refactor duplicate reconnect failure code. Addresses review comment by Sagi on controller reset support: http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme_fc: get rid of local reconnect_delayJames Smart
Remove the local copy of reconnect_delay. Use the value in the controller options directly. Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22net: sched: cls_matchall: fix null pointer dereferenceJiri Pirko
Since the head is guaranteed by the check above to be null, the call_rcu would explode. Remove the previously logically dead code that was made logically very much alive and kicking. Fixes: 985538eee06f ("net/sched: remove redundant null check on head") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22blk-mq: remove blk_mq_abort_requeue_list()Ming Lei
No one uses it any more, so remove it. Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme: avoid to use blk_mq_abort_requeue_list()Ming Lei
NVMe may add request into requeue list simply and not kick off the requeue if hw queues are stopped. Then blk_mq_abort_requeue_list() is called in both nvme_kill_queues() and nvme_ns_remove() for dealing with this issue. Unfortunately blk_mq_abort_requeue_list() is absolutely a race maker, for example, one request may be requeued during the aborting. So this patch just calls blk_mq_kick_requeue_list() in nvme_kill_queues() to handle this issue like what nvme_start_queues() does. Now all requests in requeue list when queues are stopped will be handled by blk_mq_kick_requeue_list() when queues are restarted, either in nvme_start_queues() or in nvme_kill_queues(). Cc: stable@vger.kernel.org Reported-by: Zhang Yi <yizhan@redhat.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()Ming Lei
Inside nvme_kill_queues(), we have to start hw queues for draining requests in sw queues, .dispatch list and requeue list, so use blk_mq_start_hw_queues() instead of blk_mq_start_stopped_hw_queues() which only run queues if queues are stopped, but the queues may have been started already, for example nvme_start_queues() is called in reset work function. blk_mq_start_hw_queues() run hw queues in current context, instead of running asynchronously like before. Given nvme_kill_queues() is run from either remove context or reset worker context, both are fine to run hw queue directly. And the mutex of namespaces_mutex isn't a problem too becasue nvme_start_freeze() runs hw queue in this way already. Cc: stable@vger.kernel.org Reported-by: Zhang Yi <yizhan@redhat.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22nvme-rdma: support devices with queue size < 32Marta Rybczynska
In the case of small NVMe-oF queue size (<32) we may enter a deadlock caused by the fact that the IB completions aren't sent waiting for 32 and the send queue will fill up. The error is seen as (using mlx5): [ 2048.693355] mlx5_0:mlx5_ib_post_send:3765:(pid 7273): [ 2048.693360] nvme nvme1: nvme_rdma_post_send failed with error code -12 This patch changes the way the signaling is done so that it depends on the queue depth now. The magic define has been removed completely. Cc: stable@vger.kernel.org Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Signed-off-by: Samuel Jones <sjones@kalray.eu> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-22vsock: use new wait API for vsock_stream_sendmsg()WANG Cong
As reported by Michal, vsock_stream_sendmsg() could still sleep at vsock_stream_has_space() after prepare_to_wait(): vsock_stream_has_space vmci_transport_stream_has_space vmci_qpair_produce_free_space qp_lock qp_acquire_queue_mutex mutex_lock Just switch to the new wait API like we did for commit d9dc8b0f8b4e ("net: fix sleeping for sk_wait_event()"). Reported-by: Michal Kubecek <mkubecek@suse.cz> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22bonding: fix randomly populated arp target arrayJarod Wilson
In commit dc9c4d0fe023, the arp_target array moved from a static global to a local variable. By the nature of static globals, the array used to be initialized to all 0. At present, it's full of random data, which that gets interpreted as arp_target values, when none have actually been specified. Systems end up booting with spew along these lines: [ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0 [ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready [ 32.204892] lacp0: Setting MII monitoring interval to 100 [ 32.211071] lacp0: Removing ARP target 216.124.228.17 [ 32.216824] lacp0: Removing ARP target 218.160.255.255 [ 32.222646] lacp0: Removing ARP target 185.170.136.184 [ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.243987] lacp0: Removing ARP target 56.125.228.17 [ 32.249625] lacp0: Removing ARP target 218.160.255.255 [ 32.255432] lacp0: Removing ARP target 15.157.233.184 [ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal [ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255) [ 32.276632] lacp0: Removing ARP target 16.0.0.0 [ 32.281755] lacp0: Removing ARP target 218.160.255.255 [ 32.287567] lacp0: Removing ARP target 72.125.228.17 [ 32.293165] lacp0: Removing ARP target 218.160.255.255 [ 32.298970] lacp0: Removing ARP target 8.125.228.17 [ 32.304458] lacp0: Removing ARP target 218.160.255.255 None of these were actually specified as ARP targets, and the driver does seem to clean up the mess okay, but it's rather noisy and confusing, leaks values to userspace, and the 255.255.255.255 spew shows up even when debug prints are disabled. The fix: just zero out arp_target at init time. While we're in here, init arp_all_targets_value in the right place. Fixes: dc9c4d0fe023 ("bonding: reduce scope of some global variables") CC: Mahesh Bandewar <maheshb@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22Merge branches 'pm-sleep' and 'powercap'Rafael J. Wysocki
* pm-sleep: PM / hibernate: Declare variables as static RTC: rtc-cmos: Fix wakeup from suspend-to-idle PM / wakeup: Fix up wakeup_source_report_event() * powercap: PowerCap: Fix an error code in powercap_register_zone()
2017-05-22Merge branches 'acpi-button' and 'acpi-tools'Rafael J. Wysocki
* acpi-button: Revert "ACPI / button: Remove lid_init_state=method mode" * acpi-tools: tools/power/acpi: Add .gitignore file
2017-05-22Merge branches 'intel_pstate', 'pm-cpufreq' and 'pm-cpufreq-sched'Rafael J. Wysocki
* intel_pstate: cpufreq: intel_pstate: Document the current behavior and user interface * pm-cpufreq: cpufreq: dbx500: add a Kconfig symbol * pm-cpufreq-sched: cpufreq: schedutil: use now as reference when aggregating shared policy requests
2017-05-22net: Make IP alignment calulations clearer.David S. Miller
The assignmnet: ip_align = strict ? 2 : NET_IP_ALIGN; in compare_pkt_ptr_alignment() trips up Coverity because we can only get to this code when strict is true, therefore ip_align will always be 2 regardless of NET_IP_ALIGN's value. So just assign directly to '2' and explain the situation in the comment above. Reported-by: "Gustavo A. R. Silva" <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22mmc: sdhci-iproc: suppress spurious interrupt with Multiblock readSrinath Mannam
The stingray SDHCI hardware supports ACMD12 and automatically issues after multi block transfer completed. If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen on multi block read command with below error message: Got data interrupt 0x00000002 even though no data operation was in progress. This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACM12 support in SDHCI hardware and suppress spurious interrupt. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22bonding: fix accounting of active ports in 3adJarod Wilson
As of 7bb11dc9f59d and 0622cab0341c, bond slaves in a 3ad bond are not removed from the aggregator when they are down, and the active slave count is NOT equal to number of ports in the aggregator, but rather the number of ports in the aggregator that are still enabled. The sysfs spew for bonding_show_ad_num_ports() has a comment that says "Show number of active 802.3ad ports.", but it's currently showing total number of ports, both active and inactive. Remedy it by using the same logic introduced in 0622cab0341c in __bond_3ad_get_active_agg_info(), so sysfs, procfs and netlink all report the number of active ports. Note that this means that IFLA_BOND_AD_INFO_NUM_PORTS really means NUM_ACTIVE_PORTS instead of NUM_PORTS, and thus perhaps should be renamed for clarity. Lightly tested on a dual i40e lacp bond, simulating link downs with an ip link set dev <slave2> down, was able to produce the state where I could see both in the same aggregator, but a number of ports count of 1. MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 2 <--- Slave Interface: ens10 MII Status: up <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 MII Status: up Active Aggregator Info: Aggregator ID: 1 Number of ports: 1 <--- Slave Interface: ens10 MII Status: down <--- Aggregator ID: 1 Slave Interface: ens11 MII Status: up Aggregator ID: 1 CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22net: atheros: atl2: don't return zero on failure path in atl2_probe()Alexey Khoroshilov
If dma mask checks fail in atl2_probe(), it breaks off initialization, deallocates all resources, but returns zero. The patch adds proper error code return value and make error code setup unified. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22mmc: cavium: Fix probing race with regulatorJan Glauber
If the regulator probing is not yet finished this driver might catch a -EPROBE_DEFER. Returning after this condition did not remove the created platform device. On a repeated call to the probe function the of_platform_device_create fails. Calling of_platform_device_destroy after EPROBE_DEFER resolves this bug. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22of/platform: Make of_platform_device_destroy globally visibleJan Glauber
of_platform_device_destroy is the counterpart to of_platform_device_create which is a non-static function. After creating a platform device it might be neccessary to destroy it to deal with -EPROBE_DEFER where a repeated of_platform_device_create call would fail otherwise. Therefore also make of_platform_device_destroy globally visible. Signed-off-by: Jan Glauber <jglauber@cavium.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22mmc: cavium: Prevent crash with incomplete DTJan Glauber
In case the DT specifies neither a regulator nor a gpio for the shared power the driver will crash accessing the regulator. Prevent the crash by checking the regulator before use. Use mmc_regulator_get_supply() instead of open coding the same logic. Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-22ipv6: fix out of bound writes in __ip6_append_data()Eric Dumazet
Andrey Konovalov and idaifish@gmail.com reported crashes caused by one skb shared_info being overwritten from __ip6_append_data() Andrey program lead to following state : copy -4200 datalen 2000 fraglen 2040 maxfraglen 2040 alloclen 2048 transhdrlen 0 offset 0 fraggap 6200 The skb_copy_and_csum_bits(skb_prev, maxfraglen, data + transhdrlen, fraggap, 0); is overwriting skb->head and skb_shared_info Since we apparently detect this rare condition too late, move the code earlier to even avoid allocating skb and risking crashes. Once again, many thanks to Andrey and syzkaller team. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: <idaifish@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-22ALSA: hda - Update the list of quirk modelsTakashi Iwai
I've forgotten to sync the documentation with the actually available options for some time. Now all updated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22ALSA: hda - Provide dual-codecs model option for a few Realtek codecsTakashi Iwai
Recently some laptops and mobos are equipped with the dual Realtek codecs that require special quirks. For making the debugging easier, add the model "dual-codecs" to be passed via module option. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming moboTakashi Iwai
MSI Z270-Gamin mobo has also two ALC1220 codecs like Gigabyte AZ370- Gaming mobo. Apply the same quirk to this one. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-22i2c: designware: Fix bogus sda_hold_time due to uninitialized varsJan Kiszka
We need to initializes those variables to 0 for platforms that do not provide ACPI parameters. Otherwise, we set sda_hold_time to random values, breaking e.g. Galileo and IOT2000 boards. Fixes: 9d6408433019 ("i2c: designware: don't infer timings described by ACPI from clock rate") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 12:41:31 +0000