summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-14perf trace: Improve the error messagesRamkumar Ramachandra
Currently, execution of 'perf trace' reports the following cryptic message to the user: $ perf trace Couldn't read the raw_syscalls tracepoints information! Typically this happens because the user does not have permissions to read the debugfs filesystem. Also handle the case when the kernel was not compiled with debugfs support or when it isn't mounted. Now, the tool prints detailed error messages: $ perf trace Error: Unable to find debugfs Hint: Was your kernel was compiled with debugfs support? Hint: Is the debugfs filesystem mounted? Hint: Try 'sudo mount -t debugfs nodev /sys/kernel/debug' $ perf trace Error: No permissions to read /sys/kernel/debug//tracing/events/raw_syscalls Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/' Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1380863851-14460-1-git-send-email-artagnon@gmail.com [ Added ready to use commands to fix the issues as extra hints, use the current debugfs mount point when reporting permission error, use strerror_r instead of the deprecated sys_errlist, as reported by David Ahern ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-13Linux 3.12-rc5v3.12-rc5Linus Torvalds
2013-10-13Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fixes from Wim Van Sebroeck: "This will fix a deadlock on the ts72xx_wdt driver, fix bitmasks in the kempld_wdt driver and fix a section mismatch in the sunxi_wdt driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sunxi: Fix section mismatch watchdog: kempld_wdt: Fix bit mask definition watchdog: ts72xx_wdt: locking bug in ioctl
2013-10-13watchdog: sunxi: Fix section mismatchMaxime Ripard
This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-10-13watchdog: kempld_wdt: Fix bit mask definitionJingoo Han
STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-10-13watchdog: ts72xx_wdt: locking bug in ioctlDan Carpenter
Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-10-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes this week, mostly OMAP related. Nothing stands out as particularly controversial. Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including the Chromebooks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: dts: Update 5250 arch timer node with clock frequency ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
2013-10-13ARM: exynos: dts: Update 5250 arch timer node with clock frequencyYuvaraj Kumar C D
Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14) [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0) [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18) [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58) [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c) [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13Merge tag 'fixes-against-v3.12-rc3-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few fixes for omap3 related hangs and errors that people have noticed now that people are actually using the device tree based booting for omap3. Also one regression fix for timer compile for dra7xx when omap5 is not selected, and a LED regression fix for n900. * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13Merge branch 'parisc-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "This patchset includes a bugfix to prevent a kernel crash when memory in page zero is accessed by the kernel itself, e.g. via probe_kernel_read(). Furthermore we now export flush_cache_page() which is needed (indirectly) by the lustre filesystem. The other patches remove unused functions and optimizes the page fault handler to only evaluate variables if needed, which again protects against possible kernel crashes" * 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: let probe_kernel_read() capture access to page zero parisc: optimize variable initialization in do_page_fault parisc: fix interruption handler to respect pagefault_disable() parisc: mark parisc_terminate() noreturn and cold. parisc: remove unused syscall_ipi() function. parisc: kill SMP single function call interrupt parisc: Export flush_cache_page() (needed by lustre)
2013-10-13Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "Another week, time to send another fixes request taking time out of extended weekend for the festivities in this part of the world. We have two fixes from Sergei for rcar driver and one fixing memory leak of edma driver by Geyslan" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: edma.c: remove edma_desc leakage rcar-hpbdma: add parameter to set_slave() method rcar-hpbdma: remove shdma_free_irq() calls
2013-10-13parisc: let probe_kernel_read() capture access to page zeroHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: optimize variable initialization in do_page_faultJohn David Anglin
The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: fix interruption handler to respect pagefault_disable()Helge Deller
Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The problem is, that in print_worker_info() we try to read the workqueue info via the probe_kernel_read() functions which use pagefault_disable() to avoid crashes like this: probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq)); probe_kernel_read(&wq, &pwq->wq, sizeof(wq)); probe_kernel_read(name, wq->name, sizeof(name) - 1); The problem here is, that the first probe_kernel_read(&pwq) might return zero in pwq and as such the following probe_kernel_reads() try to access contents of the page zero which is read protected and generate a kernel segfault. With this patch we fix the interruption handler to call parisc_terminate() directly only if pagefault_disable() was not called (in which case preempt_count()==0). Otherwise we hand over to the pagefault handler which will try to look up the faulting address in the fixup tables. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: mark parisc_terminate() noreturn and cold.Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: remove unused syscall_ipi() function.Helge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: kill SMP single function call interruptJiang Liu
Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: Export flush_cache_page() (needed by lustre)Geert Uytterhoeven
ERROR: "flush_cache_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-12vfs: allow O_PATH file descriptors for fstatfs()Linus Torvalds
Olga reported that file descriptors opened with O_PATH do not work with fstatfs(), found during further development of ksh93's thread support. There is no reason to not allow O_PATH file descriptors here (fstatfs is very much a path operation), so use "fdget_raw()". See commit 55815f70147d ("vfs: make O_PATH file descriptors usable for 'fstat()'") for a very similar issue reported for fstat() by the same team. Reported-and-tested-by: ольга крыжановская <olga.kryzhanovska@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-12Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "A bug fix and performance regression fix for ext4" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix memory leak in xattr ext4: fix performance regression in writeback of random writes
2013-10-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We've got more bug fixes in my for-linus branch: One of these fixes another corner of the compression oops from last time. Miao nailed down some problems with concurrent snapshot deletion and drive balancing. I kept out one of his patches for more testing, but these are all stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix oops caused by the space balance and dead roots Btrfs: insert orphan roots into fs radix tree Btrfs: limit delalloc pages outside of find_delalloc_range Btrfs: use right root when checking for hash collision
2013-10-12Merge tag 'sound-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All stable fixes except for a trivial headset mic fixup: the removal of bogus frame checks in snd-usb-usx2y driver that have regressed in the recent kernel versions, the HD-audio HDMI channel map fix, and a few HD-audio device-specific fixes" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack ALSA: hda - Add a headset mic model for ALC269 and friends ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model) ALSA: hda - Add fixup for ASUS N56VZ ALSA: hda - hdmi: Fix channel map switch not taking effect ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470 ALSA: snd-usb-usx2y: remove bogus frame checks
2013-10-12Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "We had various reports of problems with deferred probing in the I2C subsystem, so this pull requst is a little bigger than usual. Most issues should be addressed now so devices will be found correctly. A few ususal driver bugfixes are in here, too" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-mux-pinctrl: use deferred probe when adapter not found i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found i2c: i2c-mux-gpio: use deferred probing i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors i2c: omap: Clear ARDY bit twice i2c: Not all adapters have a parent i2c: i2c-stu300: replace platform_driver_probe to support deferred probing i2c: i2c-mxs: replace platform_driver_probe to support deferred probing i2c: i2c-imx: replace platform_driver_probe to support deferred probing i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing
2013-10-12ext4: fix memory leak in xattrDave Jones
If we take the 2nd retry path in ext4_expand_extra_isize_ea, we potentionally return from the function without having freed these allocations. If we don't do the return, we over-write the previous allocation pointers, so we leak either way. Spotted with Coverity. [ Fixed by tytso to set is and bs to NULL after freeing these pointers, in case in the retry loop we later end up triggering an error causing a jump to cleanup, at which point we could have a double free bug. -- Ted ] Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Cc: stable@vger.kernel.org
2013-10-12Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull gcc "asm goto" miscompilation workaround from Ingo Molnar: "This is the fix for the GCC miscompilation discussed in the following lkml thread: [x86] BUG: unable to handle kernel paging request at 00740060 The bug in GCC has been fixed by Jakub and the fix will be part of the GCC 4.8.2 release expected to be released next week - so the quirk's version test checks for <= 4.8.1. The quirk is only added to compiler-gcc4.h and not to the higher level compiler.h because all asm goto uses are behind a feature check" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compiler/gcc4: Add quirk for 'asm goto' miscompilation bug
2013-10-12Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A build fix and a reboot quirk" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/reboot: Add reboot quirk for Dell Latitude E5410 x86, build, pci: Fix PCI_MSI build on !SMP
2013-10-12Merge tag 'arc-fixes-for-3.12-part3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Fix for broken gdb 'jump'" * tag 'arc-fixes-for-3.12-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"
2013-10-12ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc"Vineet Gupta
ARCompact TRAP_S insn used for breakpoints, commits before exception is taken (updating architectural PC). So ptregs->ret contains next-PC and not the breakpoint PC itself. This is different from other restartable exceptions such as TLB Miss where ptregs->ret has exact faulting PC. gdb needs to know exact-PC hence ARC ptrace GETREGSET provides for @stop_pc which returns ptregs->ret vs. EFA depending on the situation. However, writing stop_pc (SETREGSET request), which updates ptregs->ret doesn't makes sense stop_pc doesn't always correspond to that reg as described above. This was not an issue so far since user_regs->ret / user_regs->stop_pc had same value and both writing to ptregs->ret was OK, needless, but NOT broken, hence not observed. With gdb "jump", they diverge, and user_regs->ret updating ptregs is overwritten immediately with stop_pc, which this patch fixes. Reported-by: Anton Kolesov <akolesov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-10-11Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fix from Ralf Baechle: "Just one fix. The stack protector was loading the value of the canary instead of its address" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: stack protector: Fix per-task canary switch
2013-10-11Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "All over the map.. - nouveau: disable MSI, needs more work, will try again next merge window - radeon: audio + uvd regression fixes, dpm fixes, reset fixes - i915: the dpms fix might fix your haswell And one pain in the ass revert, so we have VGA arbitration that when implemented 4-5 years ago really hoped that GPUs could remove themselves from arbitration completely once they had a kernel driver. It seems Intel hw designers decided that was too nice a facility to allow us to have so they removed it when they went on-die (so since Ironlake at least). Now Alex Williamson added support for VGA arbitration for newer GPUs however this now exposes itself to userspace as requireing arbitration of GPU VGA regions and the X server gets involved and disables things that it can't handle when VGA access is possibly required around every operation. So in order to not break userspace we just reverted things back to the old known broken status so maybe we can try and design out way out. Ville also had a patch to use stop machine for the two times Intel needs to access VGA space, that might be acceptable with some rework, but for now myself and Daniel agreed to just go back" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (23 commits) Revert "i915: Update VGA arbiter support for newer devices" Revert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done" drm/radeon: re-enable sw ACR support on pre-DCE4 drm/radeon/dpm: disable bapm on TN asics drm/radeon: improve soft reset on CIK drm/radeon: improve soft reset on SI drm/radeon/dpm: off by one in si_set_mc_special_registers() drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers() drm/radeon: forever loop on error in radeon_do_test_moves() drm/radeon: fix hw contexts for SUMO2 asics drm/radeon: fix typo in CP DMA register headers drm/radeon/dpm: disable multiple UVD states drm/radeon: use hw generated CTS/N values for audio drm/radeon: fix N/CTS clock matching for audio drm/radeon: use 64-bit math to calculate CTS values for audio (v2) drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress" drm/gma500: fix things after get/put page helpers drm/nouveau/mc: disable msi support by default, it's busted in tons of places drm/i915: Only apply DPMS to the encoder if enabled ...
2013-10-11perf timechart: Add example in the documentationRamkumar Ramachandra
While at it, update the synopsis to show both forms. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@gmail.com> Link: http://lkml.kernel.org/r/1380791716-10325-1-git-send-email-artagnon@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf tools: Implement summary output for 'make install'Ingo Molnar
'make install' used to show all the install lines, which is way too verbose to be really informative to the user. Implement summary output instead: comet:~/tip/tools/perf> make install BUILD: Doing 'make -j12' parallel build SUBDIR Documentation INSTALL Documentation-man INSTALL binaries INSTALL libexec INSTALL perf-archive INSTALL perl-scripts INSTALL python-scripts INSTALL bash_completion-script INSTALL tests 'make install V=1' will still show the old, detailed output. Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/1381312169-17354-5-git-send-email-mingo@kernel.org [ Fixed conflict with libperf-gtk patches in acme/perf/core, cope with 'trace' alias ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf tools: Align perf version output to other build messagesIngo Molnar
Before: CC util/pmu.o CC util/parse-events.o PERF_VERSION = 3.12.rc4.g1b30c CC util/parse-events-flex.o GEN perf-archive After: CC util/pmu.o CC util/parse-events.o PERF_VERSION = 3.12.rc4.g1b30c CC util/parse-events-flex.o GEN perf-archive Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381312169-17354-4-git-send-email-mingo@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11tools: Harmonize the various build messages in perf, lib-traceevent, lib-lkIngo Molnar
The various build lines from libtraceevent and perf mix up during a parallel build and produce unaligned output like: CC builtin-buildid-list.o CC builtin-buildid-cache.o CC builtin-list.o CC FPIC trace-seq.o CC builtin-record.o CC FPIC parse-filter.o CC builtin-report.o CC builtin-stat.o CC FPIC parse-utils.o CC FPIC kbuffer-parse.o CC builtin-timechart.o CC builtin-top.o CC builtin-script.o BUILD STATIC LIB libtraceevent.a CC builtin-probe.o CC builtin-kmem.o CC builtin-lock.o To solve this, harmonize all the build message alignments to be similar to the kernel's kbuild output: prefixed by two spaces and 11-char wide. After the patch the output looks pretty tidy, even if output lines get mixed up: CC builtin-annotate.o FLAGS: * new build flags or cross compiler CC builtin-bench.o AR liblk.a CC bench/sched-messaging.o CC FPIC event-parse.o CC bench/sched-pipe.o CC FPIC trace-seq.o CC bench/mem-memcpy.o CC bench/mem-memset.o CC FPIC parse-filter.o CC builtin-diff.o CC builtin-evlist.o CC builtin-help.o Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381312169-17354-3-git-send-email-mingo@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf tools: Implement summary output for 'make clean'Ingo Molnar
'make clean' used to show all the rm lines, which isn't really informative in any way and spams the console. Implement summary output: comet:~/tip/tools/perf> make clean CLEAN libtraceevent CLEAN liblk CLEAN config CLEAN core-objs CLEAN core-progs CLEAN core-gen CLEAN Documentation CLEAN python 'make clean V=1' will still show the old, detailed output. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1381312169-17354-2-git-send-email-mingo@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf tools: Fix redirection printoutsIngo Molnar
Fix the duplicate util/util printout Arnaldo reported: $ make V=1 O=/tmp/build/perf -C tools/perf/ util/srcline.o ... # Redirected target util/srcline.o => /tmp/build/perf/util/util/srcline.o Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131010054256.GA23716@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf trace: Initial beautifier for ioctl's 'cmd' argArnaldo Carvalho de Melo
[root@zoo linux]# trace -e ioctl | grep -v "cmd: 0x" | head -10 0.386 ( 0.001 ms): trace/1602 ioctl(fd: 1<pipe:[127057]>, cmd: TCGETS, arg: 0x7fff59fcb4d0 ) = -1 ENOTTY Inappropriate ioctl for device 1459.368 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc ) = 0 1463.586 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc ) = 0 1463.611 ( 0.002 ms): inotify_reader/10352 ioctl(fd: 18<anon_inode:inotify>, cmd: FIONREAD, arg: 0x7fb835228bcc ) = 0 3740.526 ( 0.002 ms): awk/1612 ioctl(fd: 1<pipe:[128265]>, cmd: TCGETS, arg: 0x7fff4d166b90 ) = -1 ENOTTY Inappropriate ioctl for device 3740.704 ( 0.001 ms): awk/1612 ioctl(fd: 3</proc/meminfo>, cmd: TCGETS, arg: 0x7fff4d1669a0 ) = -1 ENOTTY Inappropriate ioctl for device 3742.550 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0 ) = -1 ENOTTY Inappropriate ioctl for device 3742.555 ( 0.003 ms): ps/1614 ioctl(fd: 2<socket:[19550]>, cmd: TIOCGWINSZ, arg: 0x7fff591762b0 ) = -1 ENOTTY Inappropriate ioctl for device 3742.558 ( 0.002 ms): ps/1614 ioctl(cmd: TIOCGWINSZ, arg: 0x7fff591762b0 ) = -1 ENOTTY Inappropriate ioctl for device 3742.572 ( 0.002 ms): ps/1614 ioctl(fd: 1<pipe:[128266]>, cmd: TCGETS, arg: 0x7fff59176220 ) = -1 ENOTTY Inappropriate ioctl for device [root@zoo linux]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-afajwap3mr60dfl4qpdl1pxn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf trace: Prepare the strarray scnprintf method for reuseArnaldo Carvalho de Melo
Right now when an index passed to that method has no string associated it'll print the index as a decimal number, prepare it so that we can use it to print it in hex as well, for ioctls, for instance. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-nsvy06sqj64qvnkmzvwxsx2v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf trace: Allow specifying index offset in strarraysArnaldo Carvalho de Melo
So that the index passed doesn't have to start at zero, being decremented from an offset specified when declaring the strarray before being used as the real array index. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-k1ce6uqyt4qar9edrj3mevod@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf symbols: Make a separate function to parse /proc/modulesAdrian Hunter
Make a separate function to parse /proc/modules so that it can be reused. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1381221956-16699-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf intlist: Add priv memberDavid Ahern
Allows commands to leverage intlist infrastructure for opaque structures. For example an upcoming perf-trace change will use this as a means of tracking syscalls statistics by task. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1380395584-9025-6-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf trace: Use new machine method to loop over threadsDavid Ahern
Use the new machine method that loops over threads to dump summary data. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1380395584-9025-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf machine: Add method to loop over threads and invoke handlerDavid Ahern
Loop over all threads within a machine - including threads moved to the dead threads list -- and invoked a function. This allows commands to run some specific function on each thread (eg., dump statistics) yet hides how the threads are maintained within the machine. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1380395584-9025-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf trace: Add record optionDavid Ahern
The record option is a convience alias to include the -e raw_syscalls:* argument to perf-record. All other options are passed to perf-record's handler. Resulting data file can be analyzed by perf-trace -i. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1380395584-9025-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf trace: Fix comm resolution when reading events from fileDavid Ahern
Task comm's are getting lost when processing events from a file. The problem is that the trace struct used by the live processing has its host machine and the perf-session used for file based processing has its host machine. Fix by having both references point to the same machine. Before: 0.030 ( 0.001 ms): :27743/27743 brk( ... 0.057 ( 0.004 ms): :27743/27743 mmap(len: 4096, prot: READ|WRITE, flags: ... 0.075 ( 0.006 ms): :27743/27743 access(filename: 0x7f3809fbce00, mode: R ... 0.091 ( 0.005 ms): :27743/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ... ... After: 0.030 ( 0.001 ms): make/27743 brk( ... 0.057 ( 0.004 ms): make/27743 mmap(len: 4096, prot: READ|WRITE, flags: ... 0.075 ( 0.006 ms): make/27743 access(filename: 0x7f3809fbce00, mode: R ... 0.091 ( 0.005 ms): make/27743 open(filename: 0x7f3809fba14c, flags: CLOEXEC ... ... Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1380395584-9025-4-git-send-email-dsahern@gmail.com [ Moved creation of new host machine to a separate constructor: machine__new_host() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf stat: Add units to nanosec-based countersDavid Ahern
Ingo pointed out that the task-clock counter should have the units explicitly stated since it is not a counter. Before: perf stat -a -- sleep 1 Performance counter stats for 'sleep 1': 16186.874834 task-clock # 16.154 CPUs utilized ... After: perf stat -a -- sleep 1 Performance counter stats for 'system wide': 16146.402138 task-clock (msec) # 16.125 CPUs utilized ... Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1380400080-9211-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf stat: Don't require a workload when using system wide or CPU optionsDavid Ahern
The "perf stat" command can do system wide counters or one or more cpus. For these options do not require a workload to be specified. v2: use perf_target__none per Namhyung's comment. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/52497F3C.9070908@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf stat: Fix misleading message when specifying cpu list or system wideDavid Ahern
The "perf stat" tool displays the command run in its summary output which is misleading when using a cpu list or system wide collection. Before: perf stat -a -- sleep 1 Performance counter stats for 'sleep 1': 16152.670249 task-clock # 16.132 CPUs utilized 417 context-switches # 0.002 M/sec 7 cpu-migrations # 0.030 K/sec ... After: perf stat -a -- sleep 1 Performance counter stats for 'system wide': 16206.931120 task-clock # 16.144 CPUs utilized 395 context-switches # 0.002 M/sec 5 cpu-migrations # 0.030 K/sec ... or perf stat -C1 -- sleep 1 Performance counter stats for 'CPU(s) 1': 1001.669257 task-clock # 1.000 CPUs utilized 4,264 context-switches # 0.004 M/sec 3 cpu-migrations # 0.003 K/sec ... Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1380400080-9211-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf evlist: Fix perf_evlist__mmap_read event overflowJiri Olsa
The perf_evlist__mmap_read used 'union perf_event' as a placeholder for event crossing the mmap boundary. This is ok for sample shorter than ~PATH_MAX. However we could grow up to the maximum sample size which is 16 bits max. I hit this overflow issue when using 'perf top -G dwarf' which produces sample with the size around 8192 bytes. We could configure any valid sample size here using: '-G dwarf,size'. Using array with sample max size instead for the event placeholder. Also adding another safe check for the dynamic size of the user stack. TODO: The 'struct perf_mmap' is quite big now, maybe we could use some lazy allocation for event_copy size. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1380721599-24285-1-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-11perf bench: Fix failing assertions in numa benchPetr Holasek
Patch adds more subtle handling of -C and -N parameters in parse_{cpu,node}_setup_list() functions when there isn't enough NUMA nodes or CPUs present. Instead of assertion and terminating benchmark, partial test is skipped with error message and perf will continue to the next one. Fixed problem can be easily reproduced on machine with only one NUMA node: # Running numa/mem benchmark... # Running main, "perf bench numa mem -a" ... # Running RAM-bw-remote, "perf bench numa mem -p 1 -t 1 -P 1024 -C 0 -M 1 -s perf: bench/numa.c:622: parse_setup_node_list: Assertion `!(bind_node_0 < 0 || bind_node_0 >= g->p.nr_nodes)' failed. Aborted Signed-off-by: Petr Holasek <pholasek@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Petr Benas <pbenas@redhat.com> Link: http://lkml.kernel.org/r/1380821325-4017-1-git-send-email-pholasek@redhat.com Signed-off-by: Petr Benas <pbenas@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 18:21:06 +0000