summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-22drm/i915/icl: Define DSI panel programming registersMadhav Chauhan
This patch defines DSI_CMD_RXCTL, DSI_CMD_TXCTL registers, bitfields, masks and macros used for configuring DSI panel. v2: Define remaining bitfields v3 by Jani: - Alignment fix Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/37b41fe08ce50c3d9ef7d55c03d12a8a10a252d6.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Enable DSI transcodersMadhav Chauhan
This patch enables DSI transcoders by writing to TRANS_CONF registers and wait for its state to be enabled. v2 by Jani: - Rebase Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4b8ea0298ef9d6832a2dd69c923832d0b7b58184.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Define TRANS_CONF register for DSIMadhav Chauhan
This patch defines TRANS_CONF registers for DSI ports 0 and 1. Bitfields of these registers used for enabling and reading the current state of transcoder. v2: Add blank line before comment v3 by Jani: - Move DSI specific .pipe_offsets to GEN11_FEATURES - Macro placement and comment juggling Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Configure DSI transcoder timingsMadhav Chauhan
As part of DSI enable sequence, transcoder timings (horizontal & vertical) need to be set so that transcoder will generate the stream output as per those timings. This patch set required transcoder timings as per BSPEC. v2: Remove TRANS_TIMING_SHIFT usage v3 by Jani: - Rebase - Reduce temp variable use - Checkpatch fix Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/525949ae4e919a4f2b807d606234322534656048.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Define DSI transcoder timing registersMadhav Chauhan
This patch defines registers and bitfields used for programming DSI transcoder's horizontal and vertical timings. v2: Remove TRANS_TIMING_SHIFT definition v3 by Jani: - Group macros by transcoder Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dcc329280e3aca5b4fc3482c5bcaa0cac043c5d8.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Program TRANS_DDI_FUNC_CTL registersMadhav Chauhan
This patch select input PIPE for DSI, data lanes width, enable port sync mode and wait for DSI link to become ready. v2 by Jani: - Use MISSING_CASE with fallthrough instead of DRM_ERROR - minor stylistic changes Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/080320dc9a9e321dbe73567c6a7aa1dcff0f21c2.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Define TRANS_DDI_FUNC_CTL DSI registersMadhav Chauhan
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2 registers and their bitfields for DSI. These registers are used for enabling port sync mode, input pipe select, data lane width configuration etc. v2: Changes: - Remove redundant extra line - Correct some of bitfield definition v3 by Jani: - Move DSI transcoder offsets to GEN11_FEATURES Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/guc: Limit number of scratch registers used for H2GMichal Wajdeczko
We wrongly assumed that GuC is only using last scratch register for G2H messages, but in fact it is also using register [14] to report sleep state status. Remove that register from our H2G send registers pool. v2: No message from host to GuC uses more than 8 registers and the GuC FW itself uses an 8-element array to store the H2G message, so we may reduce our send array to just 8 registers (Daniele) v3: use explicit define (Daniele) v4: and explicit comment (Daniele) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181019101725.14024-1-michal.wajdeczko@intel.com
2018-10-22drm/i915/icl: Configure DSI transcodersMadhav Chauhan
This patch programs DSI operation mode, pixel format, BGR info, link calibration etc for the DSI transcoder. This patch also extract BGR info of the DSI panel from VBT and save it inside struct intel_dsi which used for configuring DSI transcoder. v2: Rebase v3: Use newly defined bitfields. v4 by Jani: - Use intel_dsi_bitrate() - Make bgr_enabled bool - Use 0 instead of 0x0 - Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode - Use is_vid_mode() Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7de4e39a4b2a18e53a2b9d9cea5b5b4c9d6eeb34.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Define TRANS_DSI_FUNC_CONF registerMadhav Chauhan
This patch defines transcoder function configuration registers and its bitfields for both DSI ports. Used while programming/enabling DSI transcoder. v2: Changes (Jani N) - Define _SHIFT and _MASK for bitfields - Define values for fields already shifted in place v3 by Jani: - Fix _SHIFT fields copy-pasted from _MASK - Indentation fixes - Reduce S3D orientation to single macro - Wrap a macro parameter in parens Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f188d3e59f27cbcac87d331af3d0222249db7fe4.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Add macros for MMIO of DSI transcoder registersMadhav Chauhan
This patch adds _MMIO_DSI macros for accessing DSI transcoder registers. v2: Use _MMIO_TRANS() (Ville) Credits-to: Jani N Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3ab94184357d63f2f87b90ef6f5029fb19bef73a.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Get DSI transcoder for a given portMadhav Chauhan
This patch adds a helper function to retrieve DSI transcoder for a given DSI port using newly defined enum names for DSI transcoders. Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f88ff26fa10c68e37b7838bb7c8573c881474e73.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Program TA_TIMING_PARAM registersMadhav Chauhan
This patch programs D-PHY timing parameters for the bus turn around flow(in escape clocks) only if dsi link frequency <=800 MHz using DPHY_TA_TIMING_PARAM and its identical register DSI_TA_TIMING_PARAM (inside DSI Controller within the Display Core). v2: Changes - Don't use KHz() macro (Ville/Jani N) - Use newly defined bitfields v3 by Jani: - Use intel_dsi_bitrate() in favor of a new field - Remove redundant parens Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2c777092a748dfc973714399d8c19ed7a8c31a10.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Program DSI clock and data lane timing paramsMadhav Chauhan
This patch programs D-PHY timing parameters for the clock and data lane (in escape clocks) of DSI controller (DSI port 0 and 1). These programmed timings would be used by DSI Controller to calculate link transition latencies of the data and clock lanes. v2: Use newly defined bitfields for data and clock lane v3 by Jani: - Rebase on dphy abstraction - Reduce local variables - Remove unrelated comment changes (Ville) - Use the same style for range checks as VLV (Ville) - Assign, don't OR dphy_reg contents Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/70d491e2357f328a63b67ea3c43cb57a1d469c15.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/icl: Make common DSI functions availableMadhav Chauhan
This patch moves couple of legacy DSI functions to header and common DSI files so that they can be re-used by Gen11 DSI. No functional change. v2 by Jani: - Move intel_dsi_msleep() to intel_dsi_vbt.c Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bd1f5f3e96d3e1de4d359f4fd1b750ac7e3c87d4.1539613303.git.jani.nikula@intel.com
2018-10-22drm/i915/dsi: abstract intel_dsi_tlpx_ns()Jani Nikula
Will be needed in the future. No functional changes. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2cb427e5bc2ea88e4226bfcf162b3a6f307e32e1.1539613303.git.jani.nikula@intel.com
2018-10-19drm/i915: Add ppgtt to GVT GEM contextXiong Zhang
Currently the guest couldn't boot up under GVT-g environment as the following call trace exists: [ 272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100 [ 272.504834] Call Trace: [ 272.504852] execlists_context_pin+0x2b2/0x520 [i915] [ 272.504869] intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915] [ 272.504887] intel_vgpu_create_workload+0x3e2/0x570 [i915] [ 272.504901] intel_vgpu_submit_execlist+0xc0/0x2a0 [i915] [ 272.504916] elsp_mmio_write+0xc7/0x130 [i915] [ 272.504930] intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915] [ 272.504944] intel_vgpu_emulate_mmio_write+0xac/0x240 [i915] [ 272.504947] intel_vgpu_rw+0x22d/0x270 [kvmgt] [ 272.504949] intel_vgpu_write+0x164/0x1f0 [kvmgt] GVT GEM context is created by i915_gem_context_create_gvt() which doesn't allocate ppgtt. So GVT GEM context structure doesn't have a valid i915_hw_ppgtt. This patch create ppgtt table at GVT GEM context creation, then assign shadow ppgtt's root table address to this ppgtt when shadow ppgtt will be used on GPU. So GVT GEM context has valid ppgtt address. But note that this ppgtt only contain valid ppgtt root table address, the table entry in this ppgtt structure are invalid. Fixes:4a3d3f6785be("drm/i915: Match code to comment and enforce ppgtt for execlists") Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1539841231-3157-1-git-send-email-xiong.y.zhang@intel.com
2018-10-19drm/nouveau: Fix nv50_mstc->best_encoder()Lyude Paul
As mentioned in the previous commit, we currently prevent new modesets on recently-removed MST connectors by returning no encoder from our ->best_encoder() callback once the MST port has disappeared. This is wrong however, because it prevents legacy modesetting users from being able to disable CRTCs on MST connectors after the connector's respective topology has disappeared. So, fix this by instead by just always returning a valid encoder. Changes since v2: - Remove usage of atomic MST helper for now, since that got replaced with a much simpler solution Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com (cherry picked from commit e87b0bbc9f0380d403f8f2f6abba0d51c74d944f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-19drm/atomic_helper: Stop modesets on unregistered connectors harderLyude Paul
Unfortunately, it appears our fix in: commit b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Which attempted to work around the problems introduced by: commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Is still not the right solution, as modesets can still be triggered outside of drm_atomic_set_crtc_for_connector(). So in order to fix this, while still being careful that we don't break modesets that a driver may perform before being registered with userspace, we replace connector->registered with a tristate member, connector->registration_state. This allows us to keep track of whether or not a connector is still initializing and hasn't been exposed to userspace, is currently registered and exposed to userspace, or has been legitimately removed from the system after having once been present. Using this info, we can prevent userspace from performing new modesets on unregistered connectors while still allowing the driver to perform modesets on unregistered connectors before the driver has finished being registered. Changes since v1: - Fix WARN_ON() in drm_connector_cleanup() that CI caught with this patchset in igt@drv_module_reload@basic-reload-inject and igt@drv_module_reload@basic-reload by checking if the connector is registered instead of unregistered, as calling drm_connector_cleanup() on a connector that hasn't been registered with userspace yet should stay valid. - Remove unregistered_connector_check(), and just go back to what we were doing before in commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") except replacing READ_ONCE(connector->registered) with drm_connector_is_unregistered(). This gets rid of the behavior of allowing DPMS On<->Off, but that should be fine as it's more consistent with the UAPI we had before - danvet - s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet - Update documentation, fix some typos. Fixes: b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com (cherry picked from commit 39b50c603878f4f8ae541ac4088a805d588abc79) Fixes: e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Fixes: 34ca26a98ad6 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: stable@vger.kernel.org Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-19drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectorsLyude Paul
It appears when testing my previous fix for some of the legacy modesetting issues with MST, I misattributed some kernel splats that started appearing on my machine after a rebase as being from upstream. But it appears they actually came from my patch series: [ 2.980512] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:65:eDP-1] [ 2.980516] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CONNECTOR:65:eDP-1] is not registered [ 2.980516] ------------[ cut here ]------------ [ 2.980519] Could not determine valid watermarks for inherited state [ 2.980553] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915] [ 2.980556] Modules linked in: i915(O+) i2c_algo_bit drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops drm(O) intel_rapl x86_pkg_temp_thermal iTCO_wdt wmi_bmof coretemp crc32_pclmul psmouse i2c_i801 mei_me mei i2c_core lpc_ich mfd_core tpm_tis tpm_tis_core wmi tpm thinkpad_acpi pcc_cpufreq video ehci_pci crc32c_intel serio_raw ehci_hcd xhci_pci xhci_hcd [ 2.980577] CPU: 3 PID: 551 Comm: systemd-udevd Tainted: G O 4.19.0-rc7Lyude-Test+ #1 [ 2.980579] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET63WW (1.27 ) 11/10/2016 [ 2.980605] RIP: 0010:intel_modeset_init+0x14d7/0x19f0 [i915] [ 2.980607] Code: 89 df e8 ec 27 02 00 e9 24 f2 ff ff be 03 00 00 00 48 89 df e8 da 27 02 00 e9 26 f2 ff ff 48 c7 c7 c8 d1 34 a0 e8 23 cf dc e0 <0f> 0b e9 7c fd ff ff f6 c4 04 0f 85 37 f7 ff ff 48 8b 83 60 08 00 [ 2.980611] RSP: 0018:ffffc90000287988 EFLAGS: 00010282 [ 2.980614] RAX: 0000000000000000 RBX: ffff88031b488000 RCX: 0000000000000006 [ 2.980617] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff880321ad54d0 [ 2.980620] RBP: ffffc90000287a10 R08: 000000000000040a R09: 0000000000000065 [ 2.980623] R10: ffff88030ebb8f00 R11: ffffffff81416590 R12: ffff88031b488000 [ 2.980626] R13: ffff88031b4883a0 R14: ffffc900002879a8 R15: ffff880319099800 [ 2.980630] FS: 00007f475620d180(0000) GS:ffff880321ac0000(0000) knlGS:0000000000000000 [ 2.980633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.980636] CR2: 00007f9ef28018a0 CR3: 000000031b72c001 CR4: 00000000003606e0 [ 2.980639] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.980642] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2.980645] Call Trace: [ 2.980675] i915_driver_load+0xb0e/0xdc0 [i915] [ 2.980681] ? kernfs_add_one+0xe7/0x130 [ 2.980709] i915_pci_probe+0x46/0x60 [i915] [ 2.980715] pci_device_probe+0xd4/0x150 [ 2.980719] really_probe+0x243/0x3b0 [ 2.980722] driver_probe_device+0xba/0x100 [ 2.980726] __driver_attach+0xe4/0x110 [ 2.980729] ? driver_probe_device+0x100/0x100 [ 2.980733] bus_for_each_dev+0x74/0xb0 [ 2.980736] driver_attach+0x1e/0x20 [ 2.980739] bus_add_driver+0x159/0x230 [ 2.980743] ? 0xffffffffa0393000 [ 2.980746] driver_register+0x70/0xc0 [ 2.980749] ? 0xffffffffa0393000 [ 2.980753] __pci_register_driver+0x57/0x60 [ 2.980780] i915_init+0x55/0x58 [i915] [ 2.980785] do_one_initcall+0x4a/0x1c4 [ 2.980789] ? do_init_module+0x27/0x210 [ 2.980793] ? kmem_cache_alloc_trace+0x131/0x190 [ 2.980797] do_init_module+0x60/0x210 [ 2.980800] load_module+0x2063/0x22e0 [ 2.980804] ? vfs_read+0x116/0x140 [ 2.980807] ? vfs_read+0x116/0x140 [ 2.980811] __do_sys_finit_module+0xbd/0x120 [ 2.980814] ? __do_sys_finit_module+0xbd/0x120 [ 2.980818] __x64_sys_finit_module+0x1a/0x20 [ 2.980821] do_syscall_64+0x5a/0x110 [ 2.980824] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2.980826] RIP: 0033:0x7f4754e32879 [ 2.980828] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 45 2c 00 f7 d8 64 89 01 48 [ 2.980831] RSP: 002b:00007fff43fd97d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.980834] RAX: ffffffffffffffda RBX: 0000559a44ca64f0 RCX: 00007f4754e32879 [ 2.980836] RDX: 0000000000000000 RSI: 00007f475599f4cd RDI: 0000000000000018 [ 2.980838] RBP: 00007f475599f4cd R08: 0000000000000000 R09: 0000000000000000 [ 2.980839] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000000000 [ 2.980841] R13: 0000559a44c92fd0 R14: 0000000000020000 R15: 0000000000000000 [ 2.980881] WARNING: CPU: 3 PID: 551 at drivers/gpu/drm/i915/intel_display.c:14983 intel_modeset_init+0x14d7/0x19f0 [i915] [ 2.980884] ---[ end trace 5eb47a76277d4731 ]--- The cause of this appears to be due to the fact that if there's pre-existing display state that was set by the BIOS when i915 loads, it will attempt to perform a modeset before the driver is registered with userspace. Since this happens before the driver's registered with userspace, it's connectors are also unregistered and thus-states which would turn on DPMS on a connector end up getting rejected since the connector isn't registered. These bugs managed to get past Intel's CI partially due to the fact it never ran a full test on my patches for some reason, but also because all of the tests unload the GPU once before running. Since this bug is only really triggered when the drivers tries to perform a modeset before it's been fully registered with userspace when coming from whatever display configuration the firmware left us with, it likely would never have been picked up by CI in the first place. After some discussion with vsyrjala, we decided the best course of action would be to just move the unregistered connector checks out of update_connector_routing() and into drm_atomic_set_crtc_for_connector(). The reason for this being that legacy modesetting isn't going to be expecting failures anywhere (at least this is the case with X), so ideally we want to ensure that any DPMS changes will still work even on unregistered connectors. Instead, we now only reject new modesets which would change the current CRTC assigned to an unregistered connector unless no new CRTC is being assigned to replace the connector's previous one. Signed-off-by: Lyude Paul <lyude@redhat.com> Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009204424.21462-1-lyude@redhat.com (cherry picked from commit b5d29843d8ef86d4cde4742e095b81b7fd41e688) Fixes: e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-19drm/atomic_helper: Disallow new modesets on unregistered connectorsLyude Paul
With the exception of modesets which would switch the DPMS state of a connector from on to off, we want to make sure that we disallow all modesets which would result in enabling a new monitor or a new mode configuration on a monitor if the connector for the display in question is no longer registered. This allows us to stop userspace from trying to enable new displays on connectors for an MST topology that were just removed from the system, without preventing userspace from disabling DPMS on those connectors. Changes since v5: - Fix typo in comment, nothing else Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-2-lyude@redhat.com (cherry picked from commit 4d80273976bf880c4bed9359b8f2d45663140c86) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-19Merge tag 'drm-intel-next-fixes-2018-10-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix GPU hang on MacBook2,1 when booting in EFI mode (Bugzilla #105637) - Fix garbled console on Y tiled BIOS framebuffer configs (Bugzilla #108264) - Fix black screen on certain eDP panels eg. Dell XPS 9350 (Bugzilla #107489 and #105338) - MST fixes that Rodrigo dropped from drm-intel-fixes and bunch of Icelake fixes - Then assorted proactive code fixes caught by CI or developers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018165725.GA2281@jlahtine-desk.ger.corp.intel.com
2018-10-18drm/i915: Use i915_gem_object_get_dma_address() to populate rotated vmasVille Syrjälä
Replace the kvmalloc_array() with i915_gem_object_get_dma_address() when populating rotated vmas. One random access mechanism ought to be enough for everyone? To calculate the size of the radix tree I think we can do something like this (assuming 64bit pointers): num_pages = obj_size / 4096 tree_height = ceil(log64(num_pages)) num_nodes = sum(64^n, n, 0, tree_height-1) tree_size = num_nodes * 576 If we compare that with the object size we should get a relative overhead of around .2% to 1% for reasonable sized objects, which framebuffers tend to be. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016150413.11577-1-ville.syrjala@linux.intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2018-10-18drm/i915: Drop rpm wakeref on error in debugfs/i915_drop_caches_setJoonas Lahtinen
Use single exit point to drop rpm wakeref in case of an error. Fixes: 9d3eb2c33f03 ("drm/i915: Hold rpm wakeref for debugfs/i915_drop_caches_set") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181018092025.24076-1-joonas.lahtinen@linux.intel.com
2018-10-18drm/i915/guc: drop negative doorbell alloc selftestDaniele Ceraolo Spurio
The test requires driver tweaks to avoid causing error messages on intentionally-triggered errors and to stop accessing non existing register. However, this is a pure GuC FW interface test and should be covered by FW validation, so it isn't really worth tweaking the driver for it and we're better off dropping it instead. Testing the driver running out of doorbells is already covered by igt_guc_doorbells Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181018004610.22895-1-daniele.ceraolospurio@intel.com
2018-10-18drm/i915/dsi: abstract dphy parameter initJani Nikula
intel_dsi_vbt_init() has grown too unwieldy, and it's about to be modified due to ICL DSI. Abstract out the VLV specific dphy param init. No functional changes. Intentionally no stylistic changes during code movement. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/96d15760db027a137f298ec330520ef8ec6474b0.1539613303.git.jani.nikula@intel.com
2018-10-18drm/i915/dsi: refactor bitrate calculations in intel_dsi_vbt_init()Jani Nikula
Abstract bitrate calculation to a newly resurrected intel_dsi.c file that will contain common code for VLV and ICL DSI. No functional changes. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/100e9721dfdec4f3987549ef24291bafc9cb0517.1539613303.git.jani.nikula@intel.com
2018-10-18drm/i915: make encoder enable and disable hooks optionalJani Nikula
Encoders are not alike, make enable and disable hooks optional like other hooks. Utilize this in DSI code, and remove the silly nop hook. v2: Add the check also to intel_sanitize_encoder() (Madhav) Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com> Acked-by: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016124134.10257-1-jani.nikula@intel.com
2018-10-18drm/i915/quirks: pass dev_priv instead of drm dev to quirk codeJani Nikula
Pass the type we want to simplify. No functional changes. v2: s/dev_priv/i915/g (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181017093539.5468-1-jani.nikula@intel.com
2018-10-18drm/i915/huc: Normalize HuC status returned by I915_PARAM_HAS_HUCMichal Wajdeczko
In response for I915_PARAM_HAS_HUC we are returning value that indicates if HuC firmware was loaded and verified. However, our previously used positive value was based on specific register bit which is about to change on future platform. Let's normalize our return values to 0 and 1 before clients will start to use Gen9 value. v2: use bool for implicit conversion (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Haihao Xiang <haihao.xiang@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> #1 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181017195245.39644-1-michal.wajdeczko@intel.com
2018-10-18drm/i915: GEM_WARN_ON considered harmfulTvrtko Ursulin
GEM_WARN_ON currently has dangerous semantics where it is completely compiled out on !GEM_DEBUG builds. This can leave users who expect it to be more like a WARN_ON, just without a warning in non-debug builds, in complete ignorance. Another gotcha with it is that it cannot be used as a statement. Which is again different from a standard kernel WARN_ON. This patch fixes both problems by making it behave as one would expect. It can now be used both as an expression and as statement, and also the condition evaluates properly in all builds - code under the conditional will therefore not unexpectedly disappear. To satisfy call sites which really want the code under the conditional to completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the callers to it. This one can also be used as both expression and statement. >From the above it follows GEM_DEBUG_WARN_ON should be used in situations where we are certain the condition will be hit during development, but at a place in code where error can be handled to the benefit of not crashing the machine. GEM_WARN_ON on the other hand should be used where condition may happen in production and we just want to distinguish the level of debugging output emitted between the production and debug build. v2: * Dropped BUG_ON hunk. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
2018-10-18firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.Anusha Srivatsa
Add missing MODULE_FIRMWARE while loading DMC ICL. v2: Add Fixes tag. (Rodrigo) v3: Rebase by Rodrigo after commit 7fe78985cd08 ("drm/i915/csr: restructure CSR firmware definition macros") v4: Rodrigo fixing his own mess on commit mentioning on v3 comment above. Fixes: 4445930f1c4a ("firmware/dmc/icl: load v1.07 on icelake.") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v2) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004223613.19938-1-rodrigo.vivi@intel.com (cherry picked from commit 00e5d8b1eb47378924f3de3435450650f426b02a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18drm/i915/icl: Fix signal_levelsRodrigo Vivi
Since when it was introduced we forgot to add this case so ICL was using a wrong signal_levels as reference. Fixes: fb5c8e9d4350 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com (cherry picked from commit 61cdfb9e194d2a327eef301e8fc80b63e3e1dc7a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18drm/i915/icl: Fix DDI/TC port clk_off bitsMahesh Kumar
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21. Create a function to choose correct clk-off bit. v2: Add fixes tag (Lucas) Fixes: c27e917e2bda ("drm/i915/icl: add basic support for the ICL clocks") Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com (cherry picked from commit bb1c7edc6d4d5cc6917814d858d47b22d2e93cde) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18drm/i915/icl: create function to identify combophy portMahesh Kumar
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports. Changes since V1: - keep all intel_port_is_* helper together (Lucas) Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com (cherry picked from commit 176597a12d61709727d1639836e5d68a6e7c437b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-18Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Fixes for 4.20. Highlights: - VCN DPG fixes for Picasso - Add support for the latest vega20 vbios - Scheduler timeout fix - License fixes for radeon and amdgpu - Misc other fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181017215427.2804-1-alexander.deucher@amd.com
2018-10-18Merge tag 'drm-misc-next-fixes-2018-10-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - Add quirk to fix orientation of Acer One 10 (S1003) panel (Hans) Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181017200741.GA240649@art_vandelay
2018-10-17drm/i915/gen9+: Fix initial readout for Y tiled framebuffersImre Deak
If BIOS configured a Y tiled FB we failed to set up the backing object tiling accordingly, leading to a lack of GT fence installed and a garbled console. The problem was bisected to commit 011f22eb545a ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2") but it just revealed a pre-existing issue. Kudos to Ville who suspected a missing fence looking at the corruption on the screen. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: <ronald@innovation.ch> Cc: <stable@vger.kernel.org> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by: <ronald@innovation.ch> Tested-by: <ronald@innovation.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264 Fixes: bc8d7dffacb1 ("drm/i915/skl: Provide a Skylake version of get_plane_config()") Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com (cherry picked from commit 914a4fd8cd28016038ce749a818a836124a8d270) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Large page offsets for pread/pwriteChris Wilson
Handle integer overflow when computing the sub-page length for shmem backed pread/pwrite. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012140228.29783-1-chris@chris-wilson.co.uk (cherry picked from commit a5e856a5348f6cd50889d125c40bbeec7328e466) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915/selftests: Disable shrinker across mmap-exhaustionChris Wilson
For mmap-exhaustion, we deliberately put the system under a large amount of pressure to ensure that we are able to reap mmap-offsets from dead objects. If background activity does that reaping for us, that defeats the purpose of the test and in some cases will fail our sanity checks (because of the fake activity we use to prevent the idle worker). Fixes: 932cac10c8fb ("drm/i915/selftests: Prevent background reaping of acti ve objects") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011103748.18387-1-chris@chris-wilson.co.uk (cherry picked from commit 0b4bf7ca9be824dde6ff63dd2ceba2d1367f8a58) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit ↵Manasi Navare
panel's native mode This patch fixes the original commit c0cfb10d9e1de49 ("drm/i915/edp: Do not do link training fallback or prune modes on EDP") that causes a blank screen in case of certain eDP panels (Eg: seen on Dell XPS13 9350) where first link training fails and a retraining is required by falling back to lower link rate/lane count. In case of some panels they advertise higher link rate/lane count than whats required for supporting the panel's native mode. But we always link train at highest link rate/lane count for eDP and if that fails we can still fallback to lower link rate/lane count as long as the fallback link BW still fits the native mode to avoid pruning the panel's native mode yet retraining at fallback values to recover from a blank screen. v3: * Add const for fixed_mode (Ville) v2: * Send uevent if link failure on eDP unconditionally Fixes: c0cfb10d9e1d ("drm/i915/edp: Do not do link training fallback or prune modes on EDP") Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: <stable@vger.kernel.org> # v4.17+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107489 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105338 Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Tested-by: Alexander Wilson <alexander.wilson@ncf.edu> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009212804.702-1-manasi.d.navare@intel.com (cherry picked from commit 1e712535c51ab025ebc776d4405683d81521996d) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Fix intel_dp_mst_best_encoder()Lyude Paul
Currently, i915 appears to rely on blocking modesets on no-longer-present MSTB ports by simply returning NULL for ->best_encoder(), which in turn causes any new atomic commits that don't disable the CRTC to fail. This is wrong however, since we still want to allow userspace to disable CRTCs on no-longer-present MSTB ports by changing the DPMS state to off and this still requires that we retrieve an encoder. So, fix this by always returning a valid encoder regardless of the state of the MST port. Changes since v1: - Remove mst atomic helper, since this got replaced with a much simpler solution Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-6-lyude@redhat.com (cherry picked from commit a9f9ca33d1fe9325f414914be526c0fc4ba5281c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Skip vcpi allocation for MSTB ports that are goneLyude Paul
Since we need to be able to allow DPMS on->off prop changes after an MST port has disappeared from the system, we need to be able to make sure we can compute a config for the resulting atomic commit. Currently this is impossible when the port has disappeared, since the VCPI slot searching we try to do in intel_dp_mst_compute_config() will fail with -EINVAL. Since the only commits we want to allow on no-longer-present MST ports are ones that shut off display hardware, we already know that no VCPI allocations are needed. So, hardcode the VCPI slot count to 0 when intel_dp_mst_compute_config() is called on an MST port that's gone. Changes since V4: - Don't use mst_port_gone at all, just check whether or not the drm connector is registered - Daniel Vetter Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com (cherry picked from commit f67207d78ceaf98b7531bc22df6f21328559c8d4) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Don't unset intel_connector->mst_portLyude Paul
Currently we set intel_connector->mst_port to NULL to signify that the MST port has been removed from the system so that we can prevent further action on the port such as connector probes, mode probing, etc. However, we're going to need access to intel_connector->mst_port in order to fixup ->best_encoder() so that it can always return the correct encoder for an MST port to prevent legacy DPMS prop changes from failing. This should be safe, so instead keep intel_connector->mst_port always set and instead just check the status of drm_connector->regustered to signify whether or not the connector has disappeared from the system. Changes since v2: - Add a comment to mst_port_gone (Jani Nikula) - Change mst_port_gone to a u8 instead of a bool, per the kernel bot. Apparently bool is discouraged in structs these days Changes since v4: - Don't use mst_port_gone at all! Just check if the connector is registered or not - Daniel Vetter Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com (cherry picked from commit 6ed5bb1fbad34382c8cfe9a9bf737e9a43053df5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Only reset seqno if actually idleChris Wilson
Before we can reset the seqno, we have to be sure the engines are idle. In debugfs/i915_drop_caches_set, we do wait_for_idle but allow ourselves to be interrupted. We should only proceed to reset the seqno then if we were not interrupted, and so also avoid overwriting the error status. References: https://bugs.freedesktop.org/show_bug.cgi?id=108133 Fixes: 6b048706f407 ("drm/i915: Forcibly flush unwanted requests in drop-caches") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004082119.24970-1-chris@chris-wilson.co.uk (cherry picked from commit 88a83f3c2d7a87ce7c9c4171dec8e2fb48070288) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Use the correct crtc when sanitizing plane mappingVille Syrjälä
When we decide that a plane is attached to the wrong pipe we try to turn off said plane. However we are passing around the crtc we think that the plane is supposed to be using rather than the crtc it is currently using. That doesn't work all that well because we may have to do vblank waits etc. and the other pipe might not even be enabled here. So let's pass the plane's current crtc to intel_plane_disable_noatomic() so that it can its job correctly. To do that semi-cleanly we also have to change the plane readout to record the plane's visibility into the bitmasks of the crtc where the plane is currently enabled rather than to the crtc we want to use for the plane. One caveat here is that our active_planes bitmask will get confused if both planes are enabled on the same pipe. Fortunately we can use plane_mask to reconstruct active_planes sufficiently since plane_mask still has the same meaning (is the plane visible?) during readout. We also have to do the same during the initial plane readout as the second plane could clear the active_planes bit the first plane had already set. v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel) Add Daniel's proposed comment to better document why we do this Drop the redundant intel_set_plane_visible() call Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe Cc: stable@vger.kernel.org Cc: Dennis <dennis.nezic@utoronto.ca> Cc: Daniel Vetter <daniel@ffwll.ch> Tested-by: Dennis <dennis.nezic@utoronto.ca> Tested-by: Peter Nowee <peter.nowee@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637 Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 62358aa4ee86481ce044bef04859820e1bc7c1d9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Restore vblank interrupts earlierVille Syrjälä
Plane sanitation needs vblank interrupts (on account of CxSR disable). So let's restore vblank interrupts earlier. v2: Make it actually build v3: Add comment to explain why we need this (Daniel) Cc: stable@vger.kernel.org Cc: Dennis <dennis.nezic@utoronto.ca> Tested-by: Dennis <dennis.nezic@utoronto.ca> Tested-by: Peter Nowee <peter.nowee@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637 Fixes: b1e01595a66d ("drm/i915: Redo plane sanitation during readout") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181003144951.4397-1-ville.syrjala@linux.intel.com (cherry picked from commit 68bc30deac625b8be8d3950b30dc93d09a3645f5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915: Check fb stride against plane max strideVille Syrjälä
commit 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check() functions") removed the plane max stride check for sprite planes. I was going to add it back when introducing GTT remapping for the display, but after further thought it seems better to re-introduce it separately. So let's add the max stride check back. And let's do it in a nicer form than what we had before and do it for all plane types (easy now that we have the ->max_stride() plane vfunc). Only sprite planes really need this for now since primary planes are capable of scanning out the current max fb size we allow, and cursors have more stringent stride checks elsewhere. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 4e0b83a567e2 ("drm/i915: Extract per-platform plane->check() functions") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180918140243.12207-1-ville.syrjala@linux.intel.com Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> (cherry picked from commit fc3fed5d297b51f9e2c7d4f969c95c0d6e50ca57) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-17drm/i915/icl: Fix signal_levelsRodrigo Vivi
Since when it was introduced we forgot to add this case so ICL was using a wrong signal_levels as reference. Fixes: fb5c8e9d4350 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
2018-10-17drm/amdgpu/vcn:Fix uninitialized symbol errorJames Zhu
ret_code should be initialized with 0. The check of read/write ptr should be activate when UVD_POWER_STATUS_TILES is off. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 08:47:16 +0000