summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-07Merge series "regulator: mcp16502: make lpm pin optional" from Claudiu ↵Mark Brown
Beznea <claudiu.beznea@microchip.com>: Hi, This patch makes the LPM pin as optional as this may be controlled in the last phase of suspend procedure to decrease the power consumption while suspended. Along w/ this update the MAINTAINERS entry for this driver. Thank you, Claudiu Beznea Claudiu Beznea (3): dt-bindings: regulator: mcp16502: document lpm as optional regulator: mcp16502: lpm pin can be optional on some platforms MAINTAINERS: add myself as maintainer for mcp16502 Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt | 3 ++- MAINTAINERS | 4 ++-- drivers/regulator/mcp16502.c | 2 +- 3 files changed, 5 insertions(+), 4 deletions(-) -- 2.7.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-01-07regulator: bd718x7: Stop using parent dataMatti Vaittinen
The ROHM PMIC regulator drivers only need the regmap pointer from the parent device. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210107122355.GA35080@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-07regulator: mcp16502: document lpm as optionalClaudiu Beznea
Document LPM pin as optional. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-07MAINTAINERS: add myself as maintainer for mcp16502Claudiu Beznea
Andrei is no longer with Microchip. Add myself as maintainer for MCP16502. Along with this change the status from maintained to supported. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-07regulator: mcp16502: lpm pin can be optional on some platformsClaudiu Beznea
On some platform (e.g. SAMA7G5) LPM pin should be optional as it can be controlled explicitly (via shutdown controller registers) in the platform specific power saving code to decrease the power consumption while suspended as this SoC pin may be connected to other devices that could take power saving actions based on its value. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1610028927-9842-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-05Merge series "Add driver for dvfsrc, support for active state of scpsys" ↵Mark Brown
from Henry Chen <henryc.chen@mediatek.com>: This series is based on v5.10-rc1. The patchsets add support for MediaTek hardware module named DVFSRC (dynamic voltage and frequency scaling resource collector). The DVFSRC is a HW module which is used to collect all the requests from both software and hardware and turn into the decision of minimum operating voltage and minimum DRAM frequency to fulfill those requests. So, This series is to implement the dvfsrc driver to collect all the requests of operating voltage or DRAM bandwidth from other device drivers likes GPU/Camera through 3 frameworks basically: 1. interconnect framework: to aggregate the bandwidth requirements from different clients [1] https://patchwork.kernel.org/cover/10766329/ There has a hw module "DRAM scheduler", which used to control the throughput. The DVFSRC will collect forecast data of dram bandwidth from SW consumers(camera/gpu...), and according the forecast to change the DRAM frequency 2. Regualtor framework: to handle the operating voltage requirement from user or cosumer which not belong any power domain Changes in V6: * Remove the performace state support, because the request from consumer can be replaced by using interconnect and regulator framework. * Update the DT patches and convert them to DT schema. (Georgi) * Modify the comment format and coding style. (Mark) Changes in V5: * Support more platform mt6873/mt8192 * Drop the compatible and interconnect provider node and make the parent node an interconnect provider. (Rob/Georgi) * Make modification of interconnect driver from coding suggestion. (Georgi) * Move interconnect diagram into the commit text of patch. (Georgi) * Register the interconnect provider as a platform sub-device. (Georgi) Changes in V4: * Add acked TAG on dt-bindings patches. (Rob) * Declaration of emi_icc_aggregate since the prototype of aggregate function has changed meanwhile. (Georgi) * Used emi_icc_remove instead of icc_provider_del on probe. (Georgi) * Add dvfsrc regulator driver into series. * Bug fixed of mt8183_get_current_level. * Add mutex protection for pstate operation on dvfsrc_set_performance. Changes in V3: * Remove RFC from the subject prefix of the series * Combine dt-binding patch and move interconnect dt-binding document into dvfsrc. (Rob) * Remove unused header, add unit descirption to the bandwidth, rename compatible name on interconnect driver. (Georgi) * Fixed some coding style: check flow, naming, used readx_poll_timeout on dvfsrc driver. (Ryan) * Rename interconnect driver mt8183.c to mtk-emi.c * Rename interconnect header mtk,mt8183.h to mtk,emi.h * mtk-scpsys.c: Add opp table check first to avoid OF runtime parse failed Changes in RFC V2: * Remove the DT property dram_type. (Rob) * Used generic dts property 'opp-level' to get the performace state. (Stephen) * Remove unecessary dependency config on Kconfig. (Stephen) * Remove unused header file, fixed some coding style issue, typo, error handling on dvfsrc driver. (Nicolas/Stephen) * Remove irq handler on dvfsrc driver. (Stephen) * Remove init table on dvfsrc driver, combine hw init on trustzone. * Add interconnect support of mt8183 to aggregate the emi bandwidth. (Georgi) V5: https://patchwork.kernel.org/project/linux-mediatek/list/?series=348065 V4: https://lore.kernel.org/patchwork/cover/1209284/ V3: https://patchwork.kernel.org/cover/11118867/ RFC V2: https://lore.kernel.org/patchwork/patch/1068113/ RFC V1: https://lore.kernel.org/patchwork/cover/1028535/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-01-05regulator: ROHM bd7xxxx: Do not depend on parent driver dataMatti Vaittinen
The ROHM PMIC regulator drivers only need the regmap pointer from the parent device. Regmap can be obtained via dev_get_regmap() so do not require parent to populate driver data for that. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20210105130221.GA3438042@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-05regulator: Regulator driver for the Mediatek DVFSRChenryc.chen
Driver for regulators exposed by the DVFSRC (dynamic voltage and frequency scaling resource collector) found in devices based on mt8183 and newer platforms. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Link: https://lore.kernel.org/r/1608790134-27425-12-git-send-email-henryc.chen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04Merge branch 'regulator-5.11' into regulator-5.12Mark Brown
2021-01-04Merge qcom driver fix into regulator-5.11Mark Brown
2021-01-04Merge series "regulator: fix pm8009 bindings on sm8250" from Dmitry ↵Mark Brown
Baryshkov <dmitry.baryshkov@linaro.org>: PM8009 has special revision (P=1), which is to be used for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Declare regulators data to be used for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e
2021-01-04regulator: core.c: Replace references to non-existent functionDaniel Scally
The function regulator_set_device_supply() is referenced a few times in comments in regulator/core.c; however this function was removed a long time ago by commit a5766f11cfd3 ("regulator: core - Rework machine API to remove string based functions."). Update those references to point to set_consumer_device_supply(), which replaced the old function. Signed-off-by: Daniel Scally <djrscally@gmail.com> Link: https://lore.kernel.org/r/20210103165541.784360-1-djrscally@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh: add QCOM_COMMAND_DB dependencyArnd Bergmann
A built-in regulator driver cannot link against a modular cmd_db driver: qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr' There is already a dependency for RPMh, so add another one of this type for cmd_db. Fixes: 34c5aa2666db ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error") Fixes: 46fc033eba42 ("regulator: add QCOM RPMh regulator driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulatorsDmitry Baryshkov
Fix pm8009 compatibility string to reference pm8009 revision specific to sm8250 platform. Also add S2 regulator to be used for qca639x. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: b1d2674e6121 ("arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-5-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh-regulator: add pm8009-1 chip revisionDmitry Baryshkov
PM8009 has special revision (P=1), which is to be used for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Declare regulators data to be used for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04regulator: qcom-rpmh-regulator: correct hfsmps515 definitionDmitry Baryshkov
According to the datasheet pm8009's HFS515 regulators have 16mV resolution rather than declared 1.6 mV. Correct the resolution. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revisionDmitry Baryshkov
PMIC pm8009 has special revision (P=1) made for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Add special compatibility string for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-30regulator: Add regulator driver for ATC260x PMICsCristian Ciocaltea
Add support for the DC-DC converters and LDO regulators found in the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x family of PMICs. Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/1117b1a01b3948446cb3cc407e52de3a5d4212b0.1609258905.git.cristian.ciocaltea@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-28Merge tag 'v5.11-rc1' into regulator-5.11Mark Brown
Linux 5.11-rc1
2020-12-28regulator: rt4831: Adds support for Richtek RT4831 DSV regulatorChiYuan Huang
Adds support for Richtek RT4831 DSV Regulator Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1608217244-314-6-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-28regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulatorChiYuan Huang
Adds DT binding document for Richtek RT4831 DSV regulator. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1608217244-314-3-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-28regulator: qcom-rpmh: fix build after QCOM_COMMAND_DB is tristateRandy Dunlap
Restrict REGULATOR_QCOM_RPMH to QCOM_COMMAND_DB it the latter is enabled. Fixes this build error: microblaze-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_probe': (.text+0x354): undefined reference to `cmd_db_read_addr' Fixes: 778279f4f5e4 ("soc: qcom: cmd-db: allow loading as a module") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/20201225185004.20747-1-rdunlap@infradead.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-28lib/linear_ranges: fix repeated words & one typoRandy Dunlap
Change "which which" to "for which" in 3 places. Change "ranges" to possessive "range's" in 1 place. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Brown <broonie@kernel.org> Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20201221040610.12809-1-rdunlap@infradead.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-28Merge existing fixes from regulator/for-5.11Mark Brown
2020-12-27Linux 5.11-rc1v5.11-rc1Linus Torvalds
2020-12-27proc mountinfo: make splice available againLinus Torvalds
Since commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d627c..b24c30c67863, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-27Merge tag 'ntb-5.11' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
2020-12-27Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
2020-12-27Merge tag 'objtool-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
2020-12-27Merge tag 'locking-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Misc fixes/updates: - Fix static keys usage in module __init sections - Add separate MAINTAINERS entry for static branches/calls - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing" * tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Avoid bad tracing / lockdep interaction jump_label/static_call: Add MAINTAINERS jump_label: Fix usage in module __init
2020-12-27Merge tag 'timers-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Update/fix two CPU sanity checks in the hotplug and the boot code, and fix a typo in the Kconfig help text. [ Context: the first two commits are the result of an ongoing annotation+review work of (intentional) tick_do_timer_cpu() data races reported by KCSAN, but the annotations aren't fully cooked yet ]" * tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill" tick/sched: Remove bogus boot "safety" check tick: Remove pointless cpu valid check in hotplug code
2020-12-27Merge tag 'sched-urgent-2020-12-27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a context switch performance regression" * tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Optimize finish_lock_switch()
2020-12-26mfd: ab8500-debugfs: Remove extraneous seq_putcLinus Torvalds
Commit c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by: Joe Perches <joe@perches.com> Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'pci-v5.11-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
2020-12-25mfd: ab8500-debugfs: Remove extraneous curly braceNathan Chancellor
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25PCI: dwc: Fix inverted condition of DMA mask setup warningAlexander Lobakin
Commit 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-25PCI: tegra: Fix host link initializationRob Herring
Commit b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com>
2020-12-25drm/amd/display: avoid uninitialized variable warningLinus Torvalds
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'perf-tools-2020-12-24' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use cases in ARM machines. - Fix memory leak when synthesizing SDT probes in 'perf probe'. - Update kernel header copies related to KVM, epol_pwait. msr-index and powerpc and s390 syscall tables. * tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits) perf probe: Fix memory leak when synthesizing SDT probes perf stat aggregation: Add separate thread member perf stat aggregation: Add separate core member perf stat aggregation: Add separate die member perf stat aggregation: Add separate socket member perf stat aggregation: Add separate node member perf stat aggregation: Start using cpu_aggr_id in map perf cpumap: Drop in cpu_aggr_map struct perf cpumap: Add new map type for aggregation perf stat: Replace aggregation ID with a struct perf cpumap: Add new struct for cpu aggregation perf cpumap: Use existing allocator to avoid using malloc perf tests: Improve topology test to check all aggregation types perf tools: Update s390's syscall.tbl copy from the kernel sources perf tools: Update powerpc's syscall.tbl copy from the kernel sources perf s390: Move syscall.tbl check into check-headers.sh perf powerpc: Move syscall.tbl check to check-headers.sh tools headers UAPI: Synch KVM's svm.h header with the kernel tools kvm headers: Update KVM headers from the kernel sources tools headers UAPI: Sync KVM's vmx.h header with the kernel sources ...
2020-12-25Merge branch 'for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall. * 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccicheck: Correct usage of make coccicheck coccinelle: update expiring email addresses coccinnelle: Remove ptr_ret script kbuild: do not use scripts/ld-version.sh for checking spatch version remove boolinit.cocci
2020-12-25genirq: Fix export of irq_to_desc() for powerpc KVMMichael Ellerman
Commit 64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") removed the export of irq_to_desc() unless powerpc KVM is being built, because there is still a use of irq_to_desc() in modular code there. However it used: #ifdef CONFIG_KVM_BOOK3S_64_HV Which doesn't work when that symbol is =m, leading to a build failure: ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined! Fix it by checking for the definedness of the correct symbol which is CONFIG_KVM_BOOK3S_64_HV_MODULE. Fixes: 64a1b95bb9fe ("genirq: Restrict export of irq_to_desc()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted patches from previous cycle(s)..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix hostfs_open() use of ->f_path.dentry Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode() fs/namespace.c: WARN if mnt_count has become negative
2020-12-24Merge tag 'docs-5.11-2' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "A small set of late-arriving, small documentation fixes" * tag 'docs-5.11-2' of git://git.lwn.net/linux: docs: admin-guide: Fix default value of max_map_count in sysctl/vm.rst Documentation/submitting-patches: Document the SoB chain Documentation: process: Correct numbering docs: submitting-patches: Trivial - fix grammatical error
2020-12-24Merge tag 'ext4_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Various bug fixes and cleanups for ext4; no new features this cycle" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits) ext4: remove unnecessary wbc parameter from ext4_bio_write_page ext4: avoid s_mb_prefetch to be zero in individual scenarios ext4: defer saving error info from atomic context ext4: simplify ext4 error translation ext4: move functions in super.c ext4: make ext4_abort() use __ext4_error() ext4: standardize error message in ext4_protect_reserved_inode() ext4: remove redundant sb checksum recomputation ext4: don't remount read-only with errors=continue on reboot ext4: fix deadlock with fs freezing and EA inodes jbd2: add a helper to find out number of fast commit blocks ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.h ext4: fix fall-through warnings for Clang ext4: add docs about fast commit idempotence ext4: remove the unused EXT4_CURRENT_REV macro ext4: fix an IS_ERR() vs NULL check ext4: check for invalid block size early when mounting a file system ext4: fix a memory leak of ext4_free_data ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set() ext4: update ext4_data_block_valid related comments ...
2020-12-24Merge tag 'Smack-for-5.11-io_uring-fix' of ↵Linus Torvalds
git://github.com/cschaufler/smack-next Pull smack fix from Casey Schaufler: "Provide a fix for the incorrect handling of privilege in the face of io_uring's use of kernel threads. That invalidated an long standing assumption regarding the privilege of kernel threads. The fix is simple and safe. It was provided by Jens Axboe and has been tested" * tag 'Smack-for-5.11-io_uring-fix' of git://github.com/cschaufler/smack-next: Smack: Handle io_uring kernel thread privileges
2020-12-24Merge tag 'riscv-for-linus-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt "Avoid trying to initialize memory regions outside the usable range" * tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix usage of memblock_enforce_memory_limit
2020-12-24Merge tag 'powerpc-5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Four commits fixing various things in the new C VDSO code - One fix for a 32-bit VMAP stack bug - Two minor build fixes Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer. * tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO powerpc/vdso: Block R_PPC_REL24 relocations powerpc/smp: Add __init to init_big_cores() powerpc/time: Force inlining of get_tb() powerpc/boot: Fix build of dts/fsl
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-24Merge tag 'efi_updates_for_v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Borislav Petkov: "These got delayed due to a last minute ia64 build issue which got fixed in the meantime. EFI updates collected by Ard Biesheuvel: - Don't move BSS section around pointlessly in the x86 decompressor - Refactor helper for discovering the EFI secure boot mode - Wire up EFI secure boot to IMA for arm64 - Some fixes for the capsule loader - Expose the RT_PROP table via the EFI test module - Relax DT and kernel placement restrictions on ARM with a few followup fixes: - fix the build breakage on IA64 caused by recent capsule loader changes - suppress a type mismatch build warning in the expansion of EFI_PHYS_ALIGN on ARM" * tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: arm: force use of unsigned type for EFI_PHYS_ALIGN efi: ia64: disable the capsule loader efi: stub: get rid of efi_get_max_fdt_addr() efi/efi_test: read RuntimeServicesSupported efi: arm: reduce minimum alignment of uncompressed kernel efi: capsule: clean scatter-gather entries from the D-cache efi: capsule: use atomic kmap for transient sglist mappings efi: x86/xen: switch to efi_get_secureboot_mode helper arm64/ima: add ima_arch support ima: generalize x86/EFI arch glue for other EFI architectures efi: generalize efi_get_secureboot efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes efi/x86: Only copy the compressed kernel image in efi_relocate_kernel() efi/libstub/x86: simplify efi_is_native()
2020-12-24Merge tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "All straight fixes, or a prep patch for a fix, either bound for stable or fixing issues from this merge window. In particular: - Fix new shutdown op not breaking links on failure - Hold mm->mmap_sem for mm->locked_vm manipulation - Various cancelation fixes (me, Pavel) - Fix error path potential double ctx free (Pavel) - IOPOLL fixes (Xiaoguang)" * tag 'io_uring-5.11-2020-12-23' of git://git.kernel.dk/linux-block: io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work() io_uring: fix double io_uring free io_uring: fix ignoring xa_store errors io_uring: end waiting before task cancel attempts io_uring: always progress task_work on task cancel io-wq: kill now unused io_wq_cancel_all() io_uring: make ctx cancel on exit targeted to actual ctx io_uring: fix 0-iov read buffer select io_uring: close a small race gap for files cancel io_uring: fix io_wqe->work_list corruption io_uring: limit {io|sq}poll submit locking scope io_uring: inline io_cqring_mark_overflow() io_uring: consolidate CQ nr events calculation io_uring: remove racy overflow list fast checks io_uring: cancel reqs shouldn't kill overflow list io_uring: hold mmap_sem for mm->locked_vm manipulation io_uring: break links on shutdown failure
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 06:02:48 +0000