summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-11-04drm/amdkfd: add an interface to query whether is KFD is activeAlex Deucher
Add an interface to query whether KFD has any active queues. v2: fix build issues Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amdgpu/smu13: fix profile reportingAlex Deucher
The following 3 commits landed in parallel: commit d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting") commit 7a1613e47e65 ("drm/amdgpu/smu13: always apply the powersave optimization") commit 7c210ca5a2d7 ("drm/amdgpu: handle default profile on on devices without fullscreen 3D") While everything is set correctly, this caused the profile to be reported incorrectly because both the powersave and fullscreen3d bits were set in the mask and when the driver prints the profile, it looks for the first bit set. Fixes: d7d2688bf4ea ("drm/amd/pm: update workload mask after the setting") Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amdkfd: flag per-queue reset support for gfx9Jonathan Kim
Flag KFD support for per-queue reset on GFX9 devices. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amdgpu: optimize ACA log printYang Wang
- skip to print CE ACA log. - optimize ACA log print for MCA. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amdgpu: add generic func to check if ta fw is applicableLe Ma
Separated xgmi ta is required for specific APU, and driver needs parse the ta binary properly with aux xgmi ta packed. v2: make the check function more generic (Lijo) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amdgpu: clean up the suspend_completePrike Liang
To check the status of S3 suspend completion, use the PM core pm_suspend_global_flags bit(1) to detect S3 abort events. Therefore, clean up the AMDGPU driver's private flag suspend_complete. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amdgpu: correct the S3 abort check conditionPrike Liang
In the normal S3 entry, the TOS cycle counter is not reset during BIOS execution the _S3 method, so it doesn't determine whether the _S3 method is executed exactly. Howerver, the PM core performs the S3 suspend will set the PM_SUSPEND_FLAG_FW_RESUME bit if all the devices suspend successfully. Therefore, drivers can check the pm_suspend_global_flags bit(1) to detect the S3 suspend abort event. Fixes: 6704dbf71928 ("drm/amdgpu: update suspend status for aborting from deeper suspend") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/pm: Vangogh: Fix kernel memory out of bounds writeTvrtko Ursulin
KASAN reports that the GPU metrics table allocated in vangogh_tables_init() is not large enough for the memset done in smu_cmn_init_soft_gpu_metrics(). Condensed report follows: [ 33.861314] BUG: KASAN: slab-out-of-bounds in smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu] [ 33.861799] Write of size 168 at addr ffff888129f59500 by task mangoapp/1067 ... [ 33.861808] CPU: 6 UID: 1000 PID: 1067 Comm: mangoapp Tainted: G W 6.12.0-rc4 #356 1a56f59a8b5182eeaf67eb7cb8b13594dd23b544 [ 33.861816] Tainted: [W]=WARN [ 33.861818] Hardware name: Valve Galileo/Galileo, BIOS F7G0107 12/01/2023 [ 33.861822] Call Trace: [ 33.861826] <TASK> [ 33.861829] dump_stack_lvl+0x66/0x90 [ 33.861838] print_report+0xce/0x620 [ 33.861853] kasan_report+0xda/0x110 [ 33.862794] kasan_check_range+0xfd/0x1a0 [ 33.862799] __asan_memset+0x23/0x40 [ 33.862803] smu_cmn_init_soft_gpu_metrics+0x73/0x200 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.863306] vangogh_get_gpu_metrics_v2_4+0x123/0xad0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.864257] vangogh_common_get_gpu_metrics+0xb0c/0xbc0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.865682] amdgpu_dpm_get_gpu_metrics+0xcc/0x110 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.866160] amdgpu_get_gpu_metrics+0x154/0x2d0 [amdgpu 13b1bc364ec578808f676eba412c20eaab792779] [ 33.867135] dev_attr_show+0x43/0xc0 [ 33.867147] sysfs_kf_seq_show+0x1f1/0x3b0 [ 33.867155] seq_read_iter+0x3f8/0x1140 [ 33.867173] vfs_read+0x76c/0xc50 [ 33.867198] ksys_read+0xfb/0x1d0 [ 33.867214] do_syscall_64+0x90/0x160 ... [ 33.867353] Allocated by task 378 on cpu 7 at 22.794876s: [ 33.867358] kasan_save_stack+0x33/0x50 [ 33.867364] kasan_save_track+0x17/0x60 [ 33.867367] __kasan_kmalloc+0x87/0x90 [ 33.867371] vangogh_init_smc_tables+0x3f9/0x840 [amdgpu] [ 33.867835] smu_sw_init+0xa32/0x1850 [amdgpu] [ 33.868299] amdgpu_device_init+0x467b/0x8d90 [amdgpu] [ 33.868733] amdgpu_driver_load_kms+0x19/0xf0 [amdgpu] [ 33.869167] amdgpu_pci_probe+0x2d6/0xcd0 [amdgpu] [ 33.869608] local_pci_probe+0xda/0x180 [ 33.869614] pci_device_probe+0x43f/0x6b0 Empirically we can confirm that the former allocates 152 bytes for the table, while the latter memsets the 168 large block. Root cause appears that when GPU metrics tables for v2_4 parts were added it was not considered to enlarge the table to fit. The fix in this patch is rather "brute force" and perhaps later should be done in a smarter way, by extracting and consolidating the part version to size logic to a common helper, instead of brute forcing the largest possible allocation. Nevertheless, for now this works and fixes the out of bounds write. v2: * Drop impossible v3_0 case. (Mario) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: 41cec40bc9ba ("drm/amd/pm: Vangogh: Add new gpu_metrics_v2_4 to acquire gpu_metrics") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Evan Quan <evan.quan@amd.com> Cc: Wenyou Yang <WenYou.Yang@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20241025145639.19124-1-tursulin@igalia.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: 3.2.307Aric Cyr
This version brings along following fixes: - Fix polling DSC registers during S0i3 - Fix idle optimizations entry log - Change MPC Tree visual confirm colours - Fix underflow when playing 8K video in full screen mode - Optimize power up sequence for specific OLED Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: [FW Promotion] Release 0.0.240.0Taimur Hassan
Add some scruct for secure display. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: store sharpness 1dlut table in dscl_prog_dataSamson Tam
[Why] Previously dscl_prog_data stored pointer to sharpness 1dlut table. SPL had four pre-generated tables, one for each setup. This allowed us to minimize number of times we had to recalculate table when switching between setups. However, with dual display, this becomes an issue because for a given setup, we could have a different per app sharpness value than the global sharpness value. So the pre-generated table will change but both displays may point to the same table and one of them will have the wrong sharpness setting. [How] Store the sharpness 1dlut table in dscl_prog_data. This ensures that each display can have its own sharpness setting. Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Do not read DSC state if not in useOvidiu Bunea
[why & how] DSC may be power gated when coming out of S0i3, so avoid polling DSC registers since it will fail anyways. Only read if it is known that DSC is in use. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Fix idle optimizations entry logAurabindo Pillai
[Why & How] Whether we really enter idle optimizations are decided within DC. Printing into dmesg before calling the DC API gives an incorrect indication that we are entering idle optimization in cases where its disabled manually. To fix this, remove the print in DM and add them in DC Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Change MPC Tree visual confirm coloursJoshua Aberback
[Why] MPC background colours that use fractional components look different if MPC OGAM is in use vs in bypass mode. The current red and orange colours look very similar when OGAM is in bypass, so the colours need to change to be consistently very easy to tell apart. [How] Use colours that only have 0 or MAX values in each component Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Simplify dcn35_is_ips_supported()Alex Hung
[WHAT & HOW] The variable "ips_supported" is redundant and we can return from dcn35_smu_get_ips_supported directly. This fixes 1 UNUSED_VALUE issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Remove useless assignments and variablesAlex Hung
[WHAT & HOW] misc0, temp and split_pipe are assigned but immediately re-assigned to other values. The early assignments are useless and are removed. Unused variables are removed as well. This fixes 5 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: fix handling of max_downscale_src_width fail check in SPLSamson Tam
[Why] If max_downscale_src_width check fails, we exit early from spl_calculate_scaler_params but dscl_prog_data is not fully populated. If viewport is left at 0, it can cause crash in dml. [How] Call spl_set_dscl_prog_data before we exit early from spl_calculate_scaler_params to populate dscl_prog_data Populate taps in spl_get_optimal_number_of_taps Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Fix underflow when playing 8K video in full screen modeLeo Ma
[Why&How] Flickering observed while playing 8k HEVC-10 bit video in full screen mode with black border. We didn't support this case for subvp. Make change to the existing check to disable subvp for this corner case. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Refactoring if and endif statements to enable DC_LOGGERLohita Mudimela
[Why] For Header related changes for core [How] Refactoring if and endif statements to enable DC_LOGGER Reviewed-by: Mounika Adhuri <mounika.adhuri@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Reduce HPD Detection Interval for IPSFangzhi Zuo
Fix DP Compliance test 4.2.1.3, 4.2.2.8, 4.3.1.12, 4.3.1.13 when IPS enabled. Original HPD detection interval is set to 5s which violates DP compliance. Reduce the interval parameter, such that link training can be finished within 5 seconds. Fixes: afca033f10d3 ("drm/amd/display: Add periodic detection for IPS") Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28Revert "drm/amd/display: update DML2 policy ↵Ovidiu Bunea
EnhancedPrefetchScheduleAccelerationFinal DCN35" This reverts commit 9dad21f910fc ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35") [why & how] The offending commit exposes a hang with lid close/open behavior. Both issues seem to be related to ODM 2:1 mode switching, so there is another issue generic to that sequence that needs to be investigated. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add P-State Stall Timeout Recovery Support for dcn401Dillon Varone
[WHY&HOW] Adds support for P-State stall timeout detection in DCHUBBUB. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add a boot option to reduce phy ssc for HBR3Hansen Dsouza
[Why] Spread on DPREFCLK by 0.3 percent can have a negative effect on sink when PHY SSC is also spread by 0.3 percent [How] Add boot option for DMU to lower PHY SSC Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Optimize power up sequence for specific OLEDOvidiu Bunea
[why & how] OLED power up sequence takes an extra 150ms via hardcoded delay, but there is a strict requirement on DisplayOn resume time. For customer panel, remove these delays to meet target until a cleaner solution is can be put in place. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amdgpu: drop volatile from ring bufferChristian König
Volatile only prevents the compiler from re-ordering reads and writes. Since we always only modify the ring buffer from one CPU thread and have an explicit barrier before signaling the HW this should have no effect at all and just prevents compiler optimisations. While at it drop the local variables as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sunil Khatri <sunil.khatri@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdgpu: Fix amdgpu_ip_block_hw_fini()Dan Carpenter
This NULL check is reversed so the function doesn't work. Fixes: dad01f93f432 ("drm/amdgpu: validate hw_fini before function call") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/f4fc849e-4e76-4448-8657-caa4c69910b0@stanley.mountain Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24Documentation/gpu/amdgpu: Add programming model for DCNRodrigo Siqueira
One of the challenges to contributing to the display code is the complexity of the DC component. This commit adds a documentation page that discusses the programming model used by DCN and an overview of how the display code is organized. Cc: Leo Li <sunpeng.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Christian Konig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24Documentation/gpu: Document how to narrow down display issuesRodrigo Siqueira
The amdgpu driver is composed of multiple components, each of which can be a source of some specific problem that the user/developer can see. This commit introduces steps to narrow down and collect display information. Cc: Leo Li <sunpeng.li@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Christian Konig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24amdgpu: Don't print L2 status if there's nothing to printKent Russell
If a 2nd fault comes in before the 1st is handled, the 1st fault will clear out the FAULT STATUS registers before the 2nd fault is handled. Thus we get a lot of zeroes. If status=0, just skip the L2 fault status information, to avoid confusion of why some VM fault status prints in dmesg are all zeroes. Signed-off-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amd/display: add missing tracepoint event in DM atomic_commit_tailMelissa Wen
There are two events to trace the beginning and the end of amdgpu_dm_atomic_commit_tail, but only the one ate the beginning was placed. Place amdgpu_dm_atomic_commit_tail_finish tracepoint at the end than. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdkfd: sever xgmi io link if host driver has disable sharingJonathan Kim
Host drivers can create partial hives per guest by disabling xgmi sharing between certain peers in the main hive. Typically, these partial hives are fully connected per guest session. In the event that the host makes a mistake by adding a non-shared node to a guest session, have the KFD reflect sharing disabled by severing the IO link. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: James Yao <yiqing.yao@amd.com> Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdgpu: refine error handling in amdgpu_ttm_tt_pin_userptrLang Yu
Free sg table when dma_map_sgtable() failed to avoid memory leak. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdgpu: Fix the logic for NPS request failureLijo Lazar
On a hive, NPS request is placed by the first one for all devices in the hive. If the request fails, mark the mode as UNKNOWN so that subsequent devices on unload don't request it. Also, fix the mutex double lock issue in error condition, should have been mutex_unlock. Fixes: ee52489d1210 ("drm/amdgpu: Place NPS mode request on unload") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdkfd: remove extra use of volatileVictor Zhao
as the adding of mb() should be sufficient in function unmap_queues_cpsch, remove the add of volatile type as recommended Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-24drm/amdgpu: Reduce redundant gpu resets on nbio v7.4YiPeng Chai
On nbio v7.4, ras controller interrupt and athub interrupt are generated after injecting UE to PCIE, but gpu reset only needs to be triggered once. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: handle default profile on on devices without fullscreen 3DAlex Deucher
Some devices do not support fullscreen 3D. v2: Make the check generic. Fixes: 336568de918e ("drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs") Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kenneth Feng <kenneth.feng@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com>
2024-10-22Revert "drm/amdkfd: SMI report dropped event count"Alex Deucher
This reverts commit a3ab2d45b9887ee609cd3bea39f668236935774c. The userspace side for this code is not ready yet so revert for now. Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Philip Yang <Philip.Yang@amd.com>
2024-10-22drm/amdgpu: Dereference the ATCS ACPI bufferPrike Liang
Need to dereference the atcs acpi buffer after the method is executed, otherwise it will result in a memory leak. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: Save VCN shared memory with init resetLijo Lazar
VCN shared memory is in framebuffer and there are some flags initialized during sw_init. Ideally, such programming should be during hw_init. Make sure the flags are saved during reset on initialization since that reset will affect frame buffer region. For clarity, separate it out to another function. Fixes: 1e4acf4d93cd ("drm/amdgpu: Add reset on init handler for XGMI") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reported-by: Hao Zhou <hao.zhou@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean unused functions of uvd/vcn/vceSunil Khatri
Some of the functions pointers of amdgpu_ip_funcs are not used and are left commented out. Hence this cleans those up which arent used. Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Disable PSR-SU on Parade 08-01 TCON tooMario Limonciello
Stuart Hayhurst has found that both at bootup and fullscreen VA-API video is leading to black screens for around 1 second and kernel WARNING [1] traces when calling dmub_psr_enable() with Parade 08-01 TCON. These symptoms all go away with PSR-SU disabled for this TCON, so disable it for now while DMUB traces [2] from the failure can be analyzed and the failure state properly root caused. Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/uploads/a832dd515b571ee171b3e3b566e99a13/dmesg.log [1] Link: https://gitlab.freedesktop.org/drm/amd/uploads/8f13ff3b00963c833e23e68aa8116959/output.log [2] Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2645 Reviewed-by: Leo Li <sunpeng.li@amd.com> Link: https://lore.kernel.org/r/20240205211233.2601-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for vega20_ihVictor Lu
Port this change to vega20_ih.c: commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts") Original commit message: "Why: Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit if RB_ENABLE is not set. How to fix: Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set. The RB_ENABLE bit is required to be set, together with WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit would clear the RB_OVERFLOW." Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: Clean the functions pointer set as NULLSunil Khatri
We dont need to set the functions to NULL which arent needed as global structure members are by default set to zero or NULL for pointers. Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy soft_reset functionsSunil Khatri
Remove the dummy soft_reset functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy wait_for_idle functionsSunil Khatri
Remove the dummy wait_for_idle functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy suspend functionsSunil Khatri
Remove the dummy suspend functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: clean the dummy resume functionsSunil Khatri
Remove the dummy resume functions for all ip blocks. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate wait_for_idle before function callSunil Khatri
Before making a function call to wait_for_idle, validate the function pointer like we do in sw_init. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate resume before function callSunil Khatri
Before making a function call to resume, validate the function pointer like we do in sw_init. Use the helper function amdgpu_ip_block_resume where same checks and calls are repeated. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amdgpu: validate suspend before function callSunil Khatri
Before making a function call to suspend, validate the function pointer like we do in sw_init. Use the helper function amdgpu_ip_block_suspend where same checks and calls are repeated. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 05:49:27 +0000