summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-19drm: bridge: dw_hdmi: add reset function for PHY GEN1Sandor Yu
PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2, and active low reset control for PHY GEN1. Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset. Add dw_hdmi_phy_gen1_reset function for PHY GEN1. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: Enable GCP only for Deep ColorSandor Yu
HDMI1.4b specification section 6.5.3: Source shall only send GCPs with non-zero CD to sinks that indicate support for Deep Color. DW HDMI GCP default enabled, but only transmit CD and do not handle AVMUTE, PP norDefault_Phase (yet). Disable Auto GCP when 24-bit color for sinks that not support Deep Color. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/78fa41e4fb3d3d53354034bc221fcf870dbac617.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: default enable workaround to clear the overflowSandor Yu
i.MX8MPlus (v2.13a) has verified need the workaround to clear the overflow with one iteration. Only i.MX6Q(v1.30a) need the workaround with 4 iterations, the others versions later than v1.3a have been identified as needing the workaround with a single iteration. Default enable the workaround with one iteration for all versions later than v1.30a. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/561951005a85574dcdd108e5d6a3a87df930ea3d.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: panel: Register connector if DRM device is already registeredMarek Szyprowski
If panel_bridge_attach() happens after DRM device registration, the created connector will not be registered by the DRM core anymore. Fix this by registering it explicitly in such case. This fixes the following issue observed on Samsung Exynos4210-based Trats board with a DSI panel (the panel driver is registered after the Exynos DRM component device is bound): $ ./modetest -c -Mexynos could not get connector 56: No such file or directory Segmentation fault While touching this, move the connector reset() call also under the DRM device registered check, because otherwise it is not really needed. Fixes: 934aef885f9d ("drm: bridge: panel: Reset the connector state pointer") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419091422.4255-1-m.szyprowski@samsung.com
2022-04-19drm: bridge: adv7511: Enable DRM_BRIDGE_OP_HPD based on HPD interruptBiju Das
Connector detection using poll method won't work in case of bridge attached to the encoder with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR, as the code defaults to HPD. Enable DRM_BRIDGE_OP_HPD based on HPD interrupt availability, so that it will fall back to polling, if HPD is not available. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419142453.48839-1-biju.das.jz@bp.renesas.com
2022-04-19drm/bridge: lt9211: Add Lontium LT9211 bridge driverMarek Vasut
Add driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly capable at converting formats, but sadly it is also highly undocumented. This driver is written without any documentation from Lontium and based only on shreds of information available in various obscure example codes, hence long runs of unknown register patches and lengthy delays in various places. Whichever register meaning could be divined from its behavior has at least a comment around it. Currently the only mode tested is Single-link DSI to Single-link LVDS. Dual-link LVDS might work as well, the register programming is in place, but is untested. Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-2-marex@denx.de
2022-04-19dt-bindings: display: bridge: lt9211: Add Lontium LT9211 bridge driverMarek Vasut
Add bindings for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI to Single-link/Dual-Link DSI/LVDS or Single DPI bridge. This chip is highly capable at converting formats, but sadly it is also highly undocumented. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Herring <robh+dt@kernel.org> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: devicetree@vger.kernel.org To: dri-devel@lists.freedesktop.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220419143958.94873-1-marex@denx.de
2022-04-19drm/bridge: anx7625: Fill in empty ELD when no connectorHsin-Yi Wang
Speaker may share I2S with DP and .get_eld callback will be called when speaker is playing. When HDMI wans't connected, the connector will be null. Instead of return an error, fill in empty ELD. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220414090003.1806535-1-hsinyi@chromium.org
2022-04-19drm/tidss: Soft Reset DISPC on startupDevarsh Thakkar
Soft reset the display subsystem controller on startup and wait for the reset to complete. This helps the scenario where display was already in use by some other core before the linux was booted. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220314113739.18000-1-devarsht@ti.com
2022-04-18Merge drm/drm-next into drm-misc-nextPaul Cercueil
drm/drm-next has a build fix for the NewVision NV3052C panel (drivers/gpu/drm/panel/panel-newvision-nv3052c.c), which needs to be merged back to drm-misc-next, as it was failing to build there. Signed-off-by: Paul Cercueil <paul@crapouillou.net>
2022-04-18drm/nouveau/gr/gf100-: change gf108_gr_fwif from global to staticTom Rix
Smatch reports this issue gf108.c:147:1: warning: symbol 'gf108_gr_fwif' was not declared. Should it be static? gf108_gr_fwif is only used in gf108.c. Single file variables should not be global so change gf108_gr_fwif's storage-class specifier to static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418152810.3280502-1-trix@redhat.com
2022-04-18drm/nouveau: change base917c_format from global to staticTom Rix
Smatch reports this issue base917c.c:26:1: warning: symbol 'base917c_format' was not declared. Should it be static? base917c_format is only used in base917.c. Single file variables should not be global so change base917c_format's storage-class specifier to static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220418141842.296386-1-trix@redhat.com
2022-04-14Revert "video: fbdev: fbmem: fix pointer reference to null device field"Helge Deller
This reverts commit d6cd978f7e6b6f6895f8d0c4ce6e5d2c8e979afe. It has been solved differently already. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220210065824.368355-1-zhouzhouyi@gmail.com
2022-04-14video: fbdev: fbmem: fix pointer reference to null device fieldZhouyi Zhou
In function do_remove_conflicting_framebuffers, if device is NULL, there will be null pointer reference. The patch add a check to the if expression. Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220210065824.368355-1-zhouzhouyi@gmail.com
2022-04-14fbcon: replace snprintf in show functions with sysfs_emitYang Guang
Use sysfs_emit instead of scnprintf or sprintf. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/0cb7ca73d9cd7162988a22a24cd18bbcd3d8bb27.1638156341.git.yang.guang5@zte.com.cn
2022-04-14drm/dp: Factor out a function to probe a DPCD addressImre Deak
Factor out from drm_dp_dpcd_read() a function to probe a DPCD address with a 1-byte read access. This will be needed by the next patch doing a read from an LTTPR address, which must happen without the preceding wake-up read in drm_dp_dpcd_read(). While at it add tracing for the 1 byte read even if the read was successful. v2: Add a probe function instead of exporting drm_dp_dpcd_access(). (Jani) v3: Add tracing for the 1-byte read even if the read was successful. (Khaled) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411132539.984647-1-imre.deak@intel.com
2022-04-14drm/edid: add EDID block count and size helpersJani Nikula
Add some helpers to figure out the EDID extension block count, block count, size, pointers to blocks. Unfortunately, we'll need to cast away the const in a few places where we actually need to access the data. v3: fix (!edid_extension_block_count(edid) == 0) (kernel test robot) v2: fix s/j/i/ introduced in a rebase Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dc7b0850293d837439fb3914c8a9d81e39018b4b.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add single point of return to drm_do_get_edid()Jani Nikula
This will be useful in the future. Use fail label for fail exit. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8e564e9415baa4dc9dc3127e4200b2618a8a3ba0.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: drop extra local varJani Nikula
We don't need override as a variable for anything. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4d249173b34758e1d6c4a74eb98518d180f0a8ae.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: convert extension block read to EDID block read helperJani Nikula
Use the EDID block read helper also for extension block reads, making edid_block_read() the only place with the read retry logic. Note: We observe that drm_do_get_edid() does not use invalid extension blocks to flag the EDID as corrupt. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a6328b898db40235b85ad4635374bc0768b5a970.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: use EDID block read helper in drm_do_get_edid()Jani Nikula
Convert drm_do_get_edit() from the base block read helper to the generic block read helper. There's quite a bit going on here, as the corrupt and null EDID information is moved back to the caller. As we see, they were not all that clear to begin with, and this change underlines that. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3bcf98453770757ee93386da0cfbc6552d42a312.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: abstract an EDID block read helperJani Nikula
We have an abstraction for the EDID base block read, yet duplicating the retries and error handling for extension block reads. Introduce a more generic EDID block read helper. Switch to the helper piecemeal, starting with drm_edid_get_panel_id(), which doesn't need or have access to the connector anyway. The subtle change is switching from drm_edid_block_valid() to edid_block_check(). We also status print once, not for every attempt. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/47560f7530e4a7b32b56cb9038178244fe30a4af.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add typedef for block read functionJani Nikula
Make the callback a bit easier on the eye. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/10b8721bb7ea8c7df1fd0c1d97c5d446905abbf4.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: pass struct edid to connector_bad_edid()Jani Nikula
Avoid casting here and there, and make it const. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4f9fdc961dfd9b36f4649e8ba57d05e43375fc92.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: add a helper to log dump an EDID blockJani Nikula
Unify debug log dumping. There's duplication in the error paths for EDID block validity checks, but this should be neglible. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b56f120a26f54b0defc43faa6d49e26f072d4d8f.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: refactor EDID block status printingJani Nikula
Split out a function to log EDID block status. The printouts get changed slightly. Unfortunately, not all users will have struct drm_device available, so we convert to pr_* debug logging instead of drm device based logging. v2: Complain more loudly about unknown status codes (Ville) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/98d12db95e55e2e18548822078ec3b16ae006732.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: have edid_block_check() detect blocks that are all zeroJani Nikula
We have the check function, have it also detect blocks that are all zero instead of leaving that to callers. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f9ad302e6b7dbcd1dff98d94ec5500ce27bebe10.1649685475.git.jani.nikula@intel.com
2022-04-14drm/edid: convert edid_is_zero() to edid_block_is_zero() for blocksJani Nikula
As edid_is_zero() is only ever used on EDID blocks, convert it to edid_block_is_zero() with implicit block size. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5cc9387e22b4a61243df4053d1ebcc14b0007dc8.1649685475.git.jani.nikula@intel.com
2022-04-14Merge tag 'drm-intel-next-2022-04-13-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull for v5.19: Features and functionality: - Add support for new Tile 4 format on DG2 (Stan) - Add support for new CCS clear color compression on DG2 (Mika, Juha-Pekka) - Add support for new render and media compression formats on DG2 (Matt) - Support multiple eDP and LVDS native mode refresh rates (Ville) - Support static DRRS (Ville) - ATS-M platform info (Matt) - RPL-S PCI IDs (Tejas) - Extend DP HDR support to HSW+ (Uma) - Bump ADL-P DMC version to v2.16 (Madhumitha) - Let users disable PSR2 while enabling PSR1 (José) Refactoring and cleanups: - Massive DRRS and panel fixed mode refactoring and cleanups (Ville) - Power well refactoring and cleanup (Imre) - Clean up and refactor crtc readout and compute config (Ville) - Use kernel string helpers (Lucas) - Refactor gmbus pin lookups and allocation (Jani) - PCH display cleanups (Ville) - DPLL and DPLL manager refactoring (Ville) - Include and header refactoring (Jani, Tvrtko) - DMC abstractions (Jani) - Non-x86 build refactoring (Casey) - VBT parsing refactoring (Ville) - Bigjoiner refactoring (Ville) - Optimize plane, pfit, scaler, etc. programming using unlocked writes (Ville) - Split several register writes in commit to noarm+arm pairs (Ville) - Clean up SAGV handling (Ville) - Clean up bandwidth and ddb allocation (Ville) - FBC cleanups (Ville) Fixes: - Fix native HDMI and DP HDMI DFP clock limits on deep color/4:2:0 (Ville) - Fix DMC firmware platform check (Lucas) - Fix cursor coordinates on bigjoiner secondary (Ville) - Fix MSO vs. bigjoiner timing confusion (Ville) - Fix ADL-P eDP voltage swing (José) - Fix VRR capability property update (Manasi) - Log DG2 SNPS PHY calibration errors (Matt, Lucas) - Fix PCODE request status checks (Stan) - Fix uncore unclaimed access warnings (Lucas) - Fix VBT new max TMDS clock parsing (Shawn) - Fix ADL-P non-existent underrun recovery (Swathi Dhanavanthri) - Fix ADL-N stepping info (Tejas) - Fix DPT mapping flags to contiguous (Stan) - Fix DG2 max display bandwidth (Vinod) - Fix DP low voltage SKU checks (Ankit) - Fix RPL-S VT-d translation enable via quirk (Tejas) - Fixes to PSR2 (José) - Fix PIPE_MBUS_DBOX_CTL programming (José) - Fix LTTPR capability read/check on DP 1.2 (Imre) - Fix ADL-P register corruption after DDI clock enabling (Imre) - Fix ADL-P MBUS DBOX BW and B credits (Caz) Merges: - Backmerge drm-next (Rodrigo, Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/874k2xgewe.fsf@intel.com
2022-04-13fbcon: Fix delayed takeover lockingDaniel Vetter
I messed up the delayed takover path in the locking conversion in 6e7da3af008b ("fbcon: Move console_lock for register/unlink/unregister"). If CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is enabled, fbcon take-over doesn't take place when calling fbcon_fb_registered(). Instead, is deferred using a workqueue and its fbcon_register_existing_fbs() function calls to fbcon_fb_registered() again for each registered fbcon fb. This leads to the console_lock tried to be held twice, causing a deadlock. Fix it by re-extracting the lockless function and using it in the delayed takeover path, where we need to hold the lock already to iterate over the list of already registered fb. Well the current code still is broken in there (since the list is protected by a registration_lock, which we can't take here because it nests the other way round with console_lock), but in the future this will be a list protected by console_lock when this is all sorted out. While reviewing the broken commit I realized that I've left some outdated comments about the locking behind. Fix those too. v2: Improve commit message (Javier) Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Fixes: 6e7da3af008b ("fbcon: Move console_lock for register/unlink/unregister") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Du Cheng <ducheng2@gmail.com> Cc: Claudio Suarez <cssk@net-c.es> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Matthew Wilcox <willy@infradead.org> Cc: Zheyu Ma <zheyuma97@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Helge Deller <deller@gmx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220413082128.348186-1-daniel.vetter@ffwll.ch
2022-04-13drm/panel: lvds: Use bus_flags from DT panel-timing propertyMarek Vasut
This driver currently rewrites bus_flags based solely on the value of DT property 'data-mirror' and ignores bus_flags which might have been set in DT panel-timing node. Specificaly, the 'de-active' DT property sets DRM_BUS_FLAG_DE_ bus_flags. Since of_get_drm_panel_display_mode() conveniently parses the bus_flags out of DT panel-timing property, just ORR them with bus_flags inferred from 'data-mirror' DT property and use the result as panel bus_flags. This fixes handling of panels with 'panel-timing { de-active = <1>; };'. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-2-marex@denx.de
2022-04-13drm/panel: lvds: Simplify mode parsingMarek Vasut
The mode parsing is currently implemented in three steps: of_get_display_timing() - DT panel-timing to struct display_timing videomode_from_timing() - struct display_timing to struct videomode drm_display_mode_from_videomode() - struct videomode to struct drm_display_mode Replace all that with simple of_get_drm_panel_display_mode() call, which already populates struct drm_display_mode and then duplicate that mode in panel_lvds_get_modes() each time, since the mode does not change. Nice bonus is the bus_flags parsed by of_get_drm_panel_display_mode() out of panel-timing DT node, which is used in subsequent patch to fix handling of 'de-active' DT property. Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-1-marex@denx.de
2022-04-13drm: bridge: icn6211: Convert to regmapMarek Vasut
To make debugging easier, convert driver to regmap. Implement read and write regmap tables for known registers, keep all known register readable and mark those which are obviously read-only as not writeable. Use common I2C regmap for the I2C configuration, implement custom regmap bus for DSI configuration. The later is mandatory as this chip requires one extra byte set to read access length between register address and data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Acked-by: Mark Brown <broonie@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de
2022-04-13drm/i915/fbc: Call intel_fbc_activate() directly from frontbuffer flushVille Syrjälä
Remove the pointless detour via __intel_fbc_post_update() during frontbuffer flush. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-8-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2022-04-13drm/i915/fbc: Introduce intel_fbc_sanitize()Ville Syrjälä
Let's make sure FBC is always disabled when we start to take over the hardware state. I suspect this should never really happen, since the only time when we really should be taking over with the display already active is when the previous state was progammed by the BIOS, which likely shouldn't use FBC. This could be driver init, or S4 resume when the boot kernel doesn't load i915. But I suppose no harm in keeping this code around for exra safety since it's quite trivial. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-7-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2022-04-13drm/i915/fbc: Remove intel_fbc_global_disable()Ville Syrjälä
By the time intel_fbc_global_disable() gets called during driver teardown we should have already disabled all the crtcs, so no way FBC should be enabled at this point. And I have no idea what the other user (i915_restore_display()) is even trying to achieve. So let's just throw intel_fbc_global_disable() into the bin. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-6-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2022-04-13drm/i915: Remove remaining locks from i9xx plane udpatesVille Syrjälä
Now that fbc no longer nukes while a flip is pending we can remove the last uncore.lock from the i9xx plane code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-5-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2022-04-13drm/i915/fbc: Skip nuke when flip is pendingVille Syrjälä
Don't issue a nuke from frontbuffer flush while a flip is pending. This avoids the DSPADDR/DSPSURF rmw abuse from the pre-snb nuke from racing with the DSPADDR/DSPSURF write being performed by the flip/plane update. The flip itself will already cause the nuke so a double nuke is redundant. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-4-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2022-04-13drm/i915/fbc: Streamline frontbuffer busy bits handlingVille Syrjälä
If the frontbuffer bits say this fbc instance isn't affected just skip the whole thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-3-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2022-04-13drm/i915/fbc: Eliminate possible_framebuffer_bitsVille Syrjälä
Not sure what the point of this fbc->possible_frontbuffer_bits is. And especially don't see why it's returning all the bits when fbc is not even enabled. So let's just get rid of this and only say we are interested in the plane's frontbuffer bits when fbc is actually enabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-2-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-04-13drm/ttm: fix kerneldoc for ttm_lru_bulk_moveChristian König
Update the kerneldoc for the members as well. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: b0e2c9ea5afc ("drm/ttm: allow bulk moves for all domains") Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220413091242.638413-1-christian.koenig@amd.com
2022-04-13drm/ttm: fixup ttm_bo_add_move_fence v2Matthew Auld
It looks like we still need to call dma_fence_put() on the man->move, otherwise we just end up leaking it, leading to fireworks later. v2(Daniel): - Simplify the function tail Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5689 Fixes: 8bb31587820a ("drm/ttm: remove bo->moving") Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220413082133.272445-1-matthew.auld@intel.com
2022-04-12drm/i915/display/vrr: Reset VRR capable property on a long hpdManasi Navare
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings. When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit in the DPCD. Currently the driver parses that onevery HPD but fails to reset the corresponding VRR Capable Connector property. Hence the userspace still sees this as VRR Capable panel which is incorrect. Fix this by explicitly resetting the connector property. v2: Reset vrr capable if status == connector_disconnected v3: Use i915 and use bool vrr_capable (Jani Nikula) v4: Move vrr_capable to after update modes call (Jani N) Remove the redundant comment (Jan N) v5: Fixes the regression on older platforms by resetting the VRR only if HAS_VRR v6: Remove the checks from driver, add in drm core before setting VRR prop (Ville) v7: Move VRR set/reset to set/unset_edid (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 9bc34b4d0f3c ("drm/i915/display/vrr: Reset VRR capable property on a long hpd") Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220303233222.4698-1-manasi.d.navare@intel.com
2022-04-12fbcon: use min() to make code cleanerChangcheng Deng
Use min() in order to make code cleaner. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220209084810.1561184-1-deng.changcheng@zte.com.cn
2022-04-12drm/ttm: stop passing NULL fence in ttm_bo_move_sync_cleanupMatthew Auld
If we hit the sync case, like when skipping clearing for kernel internal objects, or when falling back to cpu clearing, like in i915, we end up trying to add a NULL fence, but with some recent changes in this area this now just results in NULL deref in dma_resv_add_fence: <1>[ 5.466383] BUG: kernel NULL pointer dereference, address: 0000000000000008 <1>[ 5.466384] #PF: supervisor read access in kernel mode <1>[ 5.466385] #PF: error_code(0x0000) - not-present page <6>[ 5.466386] PGD 0 P4D 0 <4>[ 5.466387] Oops: 0000 [#1] PREEMPT SMP NOPTI <4>[ 5.466389] CPU: 5 PID: 267 Comm: modprobe Not tainted 5.18.0-rc2-CI-CI_DRM_11481+ #1 <4>[ 5.466391] RIP: 0010:dma_resv_add_fence+0x63/0x260 <4>[ 5.466395] Code: 38 85 c0 0f 84 df 01 00 00 0f 88 e8 01 00 00 83 c0 01 0f 88 df 01 00 00 8b 05 35 89 10 01 49 8d 5e 68 85 c0 0f 85 45 01 00 00 <48> 8b 45 08 48 3d c0 a5 0a 82 0f 84 5c 01 00 00 48 3d 60 a5 0a 82 <4>[ 5.466396] RSP: 0018:ffffc90000e974f8 EFLAGS: 00010202 <4>[ 5.466397] RAX: 0000000000000001 RBX: ffff888123e88b28 RCX: 00000000ffffffff <4>[ 5.466398] RDX: 0000000000000001 RSI: ffffffff822e4f50 RDI: ffffffff8233f087 <4>[ 5.466399] RBP: 0000000000000000 R08: ffff8881313dbc80 R09: 0000000000000001 <4>[ 5.466399] R10: 0000000000000001 R11: 00000000da354294 R12: 0000000000000000 <4>[ 5.466400] R13: ffff88810927dc58 R14: ffff888123e88ac0 R15: ffff88810a88d600 <4>[ 5.466401] FS: 00007f5fa1193540(0000) GS:ffff88845d880000(0000) knlGS:0000000000000000 <4>[ 5.466402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 5.466402] CR2: 0000000000000008 CR3: 0000000106dd6003 CR4: 00000000003706e0 <4>[ 5.466403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[ 5.466404] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 <4>[ 5.466404] Call Trace: <4>[ 5.466405] <TASK> <4>[ 5.466406] ttm_bo_move_accel_cleanup+0x62/0x270 [ttm] <4>[ 5.466411] ? i915_rsgt_from_buddy_resource+0x185/0x1e0 [i915] <4>[ 5.466529] i915_ttm_move+0xfd/0x430 [i915] <4>[ 5.466833] ? dma_resv_reserve_fences+0x4e/0x320 <4>[ 5.466836] ? ttm_bo_add_move_fence.constprop.20+0xf7/0x140 [ttm] <4>[ 5.466841] ttm_bo_handle_move_mem+0xa1/0x140 [ttm] <4>[ 5.466845] ttm_bo_validate+0xee/0x160 [ttm] <4>[ 5.466849] __i915_ttm_get_pages+0x4f/0x210 [i915] <4>[ 5.466976] i915_ttm_get_pages+0xad/0x140 [i915] <4>[ 5.467094] ____i915_gem_object_get_pages+0x32/0xf0 [i915] <4>[ 5.467210] __i915_gem_object_get_pages+0x89/0xa0 [i915] <4>[ 5.467323] i915_vma_get_pages+0x114/0x1d0 [i915] <4>[ 5.467446] i915_vma_pin_ww+0xd3/0xa90 [i915] <4>[ 5.467570] i915_vma_pin.constprop.10+0x119/0x1b0 [i915] <4>[ 5.467700] ? __mutex_unlock_slowpath+0x3e/0x2b0 <4>[ 5.467704] intel_alloc_initial_plane_obj.isra.6+0x1a9/0x390 [i915] <4>[ 5.467833] intel_crtc_initial_plane_config+0x83/0x340 [i915] In the ttm_bo_move_sync_cleanup() case it seems we only really care about calling ttm_bo_wait_free_node(), so let's instead just call that directly. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Nirmoy Das <nirmoy.das@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411085603.58156-1-matthew.auld@intel.com
2022-04-12drm/i915/dg2: Add support for DG2 clear color compressionJuha-Pekka Heikkilä
Add support for the DG2 specific render compression with clear color framebuffer format. DG2 onwards discrete gfx has support for new flat CCS mapping, which brings in display feature in to avoid Aux walk for compressed surface. This support build on top of Flat CCS support added in XEHPSDV. FLAT CCS surface base address should be 64k aligned, Compressed displayable surfaces must use tile4 format. HAS: 1407880786 B.Spec : 7655 B.Spec : 53902 v2: Merge all bits required for the support of functionality into this patch from the patch adding the corresponding modifier. Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-5-imre.deak@intel.com
2022-04-12drm/fourcc: Introduce format modifier for DG2 clear colorMika Kahola
DG2 clear color render compression uses Tile4 layout. Therefore, we need to define a new format modifier for uAPI to support clear color rendering. v2: Display version is fixed. [Imre] KDoc is enhanced for cc modifier. [Nanley & Lionel] v3: Split out the modifier addition to a separate patch. Clarify the modifier layout description. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Mika Kahola <mika.kahola@intel.com> cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Nanley Chery <nanley.g.chery@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-4-imre.deak@intel.com
2022-04-12drm/i915/dg2: Add support for DG2 render and media compressionMatt Roper
Add support for DG2 render and media compression, for the description of buffer layouts see the previous patch adding the corresponding frame buffer modifiers. v2: Display version fix [Imre] v3: Split out modifier addition to separate patch. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> cc: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-3-imre.deak@intel.com
2022-04-12drm/fourcc: Introduce format modifiers for DG2 render and media compressionMatt Roper
The render/media engines on DG2 unify render compression and media compression into a single format for the first time, using the Tile 4 layout for main surfaces. The compression algorithm is different from any previous platform and the display engine must still be configured to decompress either a render or media compressed surface; as such, we need new RC and MC framebuffer modifiers to represent buffers in this format. v2: Clarify modifier layout description. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Nanley Chery <nanley.g.chery@intel.com> Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411143405.1073845-2-imre.deak@intel.com
2022-04-12Merge tag 'drm-misc-next-2022-04-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.19: UAPI Changes: Cross-subsystem Changes: Core Changes: - atomic: Add atomic_print_state to private objects - edid: Constify the EDID parsing API, rework of the API - dma-buf: Add dma_resv_replace_fences, dma_resv_get_singleton, make dma_resv_excl_fence private - format: Support monochrome formats - fbdev: fixes for cfb_imageblit and sys_imageblit, pagelist corruption fix - selftests: several small fixes - ttm: Rework bulk move handling Driver Changes: - Switch all relevant drivers to drm_mode_copy or drm_mode_duplicate - bridge: conversions to devm_drm_of_get_bridge and panel_bridge, autosuspend for analogix_dp, audio support for it66121, DSI to DPI support for tc358767, PLL fixes and I2C support for icn6211 - bridge_connector: Enable HPD if supported - etnaviv: fencing improvements - gma500: GEM and GTT improvements, connector handling fixes - komeda: switch to plane reset helper - mediatek: MIPI DSI improvements - omapdrm: GEM improvements - panel: DT bindings fixes for st7735r, few fixes for ssd130x, new panels: ltk035c5444t, B133UAN01, NV3052C - qxl: Allow to run on arm64 - sysfb: Kconfig rework, support for VESA graphic mode selection - vc4: Add a tracepoint for CL submissions, HDMI YUV output, HDMI and clock improvements - virtio: Remove restriction of non-zero blob_flags, - vmwgfx: support for CursorMob and CursorBypass 4, various improvements and small fixes [airlied: fixup conflict with newvision panel callbacks] Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085940.pnflvjojs4qw4b77@houat
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 06:24:45 +0000