summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-12drm: Use drm_mode_copy()Ville Syrjälä
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-23-ville.syrjala@linux.intel.com Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
2022-04-12drm: Use drm_mode_init() for on-stack modesVille Syrjälä
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head, or that we aren't copying over another mode's list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-22-ville.syrjala@linux.intel.com Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
2022-04-12drm/i915/bios: Validate the panel_name tableVille Syrjälä
In addition to the fp_timing,dvo_timing,panel_pnp_id tables there also exists a panel_name table. Unlike the others this is just one offset+table_size even though there are still 16 actual panel_names in the data block. The panel_name table made its first appearance somewhere around VBT version 156-163. The exact version is not known. But we don't need to know that since we can just check whether the pointers block has enough room for it or not. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-04-12drm/i915/bios: Trust the LFP data pointersVille Syrjälä
Now that we've sufficiently validated the LFP data pointers we can trust them. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-04-12drm/i915/bios: Validate LFP data table pointersVille Syrjälä
Make sure the LFP data table pointers sane. Sensible looking table entries, everything points correctly into the data block, etc. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-04-12drm/i915/bios: Use the copy of the LFP data table alwaysVille Syrjälä
Currently get_lvds_fp_timing() still returns a pointer to the original data block rather than our copy. Let's convert the data pointer offsets to be relative to the data block rather than the whole BDB. With that we can make get_lvds_fp_timing() return a pointer to the copy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-04-12drm/i915/bios: Make copies of VBT data blocksVille Syrjälä
Make a copy of each VBT data block with a guaranteed minimum size. The extra (if any) will just be left zeroed. This means we don't have to worry about going out of bounds when accessing any of the structure members. Otherwise that could easliy happen if we simply get the version check wrong, or if the VBT is broken/malicious. v2: Don't do arithmetic between bdb header and copy of the LFP data block (Jani) v3: Make all the copies up front v4: Only WARN about min_size==0 if we found the block Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220406133817.30652-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-04-12drm/i915/bios: Use the cached BDB versionVille Syrjälä
We have the BDB version cached, use it. We're going to have to start doing some of the BDB block parsing later, at which point we may no longer have the VBT around anymore (we free it at the end of intel_bios_init() when it didn't come via OpRegion). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220405173410.11436-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-04-11drm/i915/dg2: Do not explode on phy calibration errorLucas De Marchi
When the PHY fails on calibration we were previously skipping the ddi initialization. However the driver is not really prepared for that, ultimately leading to a NULL pointer dereference: [ 75.748348] i915 0000:03:00.0: [drm:intel_modeset_init_nogem [i915]] SNPS PHY A failed to calibrate; output will not be used. ... [ 75.750336] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled ... ( no DDI A/PHY A ) [ 75.753080] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A [ 75.753164] i915 0000:03:00.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:245:DDI C/PHY C] hw state readout: disabled, pipe A ... [ 75.754425] i915 0000:03:00.0: [drm] *ERROR* crtc 80: Can't calculate constants, dotclock = 0! [ 75.765558] i915 0000:03:00.0: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev)) [ 75.765569] WARNING: CPU: 5 PID: 1759 at drivers/gpu/drm/drm_vblank.c:728 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x347/0x360 ... [ 75.781230] BUG: kernel NULL pointer dereference, address: 000000000000007c [ 75.788198] #PF: supervisor read access in kernel mode [ 75.793347] #PF: error_code(0x0000) - not-present page [ 75.798480] PGD 0 P4D 0 [ 75.801019] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 75.805377] CPU: 5 PID: 1759 Comm: modprobe Tainted: G W 5.18.0-rc1-demarchi+ #199 [ 75.827613] RIP: 0010:icl_aux_power_well_disable+0x3b/0x200 [i915] [ 75.833890] Code: 83 ec 30 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 48 8b 06 0f b6 70 1c f6 40 20 04 8d 56 fa 0f 45 f2 e8 88 bd ff ff 48 89 ef <8b> 70 7c e8 ed 67 ff ff 48 89 ef 89 c6 e8 73 67 ff ff 84 c0 75 0a [ 75.852629] RSP: 0018:ffffc90003a7fb30 EFLAGS: 00010246 [ 75.857852] RAX: 0000000000000000 RBX: ffff8881145e8f10 RCX: 0000000000000000 [ 75.864978] RDX: ffff888115220840 RSI: 0000000000000000 RDI: ffff888115220000 [ 75.872106] RBP: ffff888115220000 R08: ffff88888effffe8 R09: 00000000fffdffff [ 75.879234] R10: ffff88888e200000 R11: ffff88888ed00000 R12: ffff8881145e8f10 [ 75.886363] R13: 0000000000000001 R14: ffff888115223240 R15: 0000000000000000 [ 75.893490] FS: 00007ff6e753a740(0000) GS:ffff88888f680000(0000) knlGS:0000000000000000 [ 75.901573] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.907313] CR2: 000000000000007c CR3: 00000001216a6001 CR4: 0000000000770ee0 [ 75.914446] PKRU: 55555554 [ 75.917153] Call Trace: [ 75.919603] <TASK> [ 75.921709] intel_power_domains_sanitize_state+0x88/0xb0 [i915] [ 75.927814] intel_modeset_init_nogem+0x317/0xef0 [i915] [ 75.933205] i915_driver_probe+0x5f6/0xdf0 [i915] [ 75.937976] i915_pci_probe+0x51/0x1d0 [i915] We skip the initialization of PHY A, but later we try to find out what is the phy for that power well and dereference dig_port, which is NULL. Failing the PHY calibration could be left as a warning or error, like it was before commit b4eb76d82a0e ("drm/i915/dg2: Skip output init on PHY calibration failure"). However that often fails for outputs not being used, which would make the warning/error appear on systems that have no visible issues. Anyway, there is still a need to fix those failures, but that is left for later. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220410061537.4187383-1-lucas.demarchi@intel.com
2022-04-11drm: mali-dp: potential dereference of null pointerJiasheng Jiang
The return value of kzalloc() needs to be checked. To avoid use of null pointer '&state->base' in case of the failure of alloc. Fixes: 99665d072183 ("drm: mali-dp: add malidp_crtc_state struct") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211214100837.46912-1-jiasheng@iscas.ac.cn
2022-04-11drm/arm/malidp: Stop using iommu_present()Robin Murphy
iommu_get_domain_for_dev() is already perfectly happy to return NULL if the given device has no IOMMU. Drop the unnecessary check. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/5049994e6c2ba92c2f30d51850c8929136d0f8ca.1649167878.git.robin.murphy@arm.com
2022-04-11drm/komeda: return early if drm_universal_plane_init() fails.Liviu Dudau
If drm_universal_plane_init() fails early we jump to the common cleanup code that calls komeda_plane_destroy() which in turn could access the uninitalised drm_plane and crash. Return early if an error is detected without going through the common code. Reported-by: Steven Price <steven.price@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/dri-devel/20211203100946.2706922-1-liviu.dudau@arm.com
2022-04-11drm/komeda: Fix an undefined behavior bug in komeda_plane_add()Zhou Qingyang
In komeda_plane_add(), komeda_get_layer_fourcc_list() is assigned to formats and used in drm_universal_plane_init(). drm_universal_plane_init() passes formats to __drm_universal_plane_init(). __drm_universal_plane_init() further passes formats to memcpy() as src parameter, which could lead to an undefined behavior bug on failure of komeda_get_layer_fourcc_list(). Fix this bug by adding a check of formats. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_DRM_KOMEDA=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 61f1c4a8ab75 ("drm/komeda: Attach komeda_dev to DRM-KMS") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://lore.kernel.org/dri-devel/20211201033704.32054-1-zhou1615@umn.edu
2022-04-11drm/ingenic: Add dw-hdmi driver specialization for jz4780Paul Boddie
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780 HDMI support. This requires a new driver, plus device tree and configuration modifications. Here we add Kconfig DRM_INGENIC_DW_HDMI, Makefile and driver code. Note that there is no hpd-gpio installed on the CI20 board HDMI connector. Hence there is no hpd detection by the connector driver and we have to enable polling in the dw-hdmi core driver. For that we need to set .poll_enabled but that struct component can only be accessed by core code. Hence we use the public setter function drm_kms_helper_hotplug_event() introduced before. Also note that we disable Color Space Conversion since it is not working on jz4780. Signed-off-by: Paul Boddie <paul@boddie.org.uk> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/e5cdf9cd44bde52cce379cc830f2d6117ea15c32.1649330171.git.hns@goldelico.com
2022-04-11drm/ingenic: Implement proper .atomic_get_input_bus_fmtsPaul Cercueil
The .atomic_get_input_bus_fmts() callback of our top bridge should return the possible input formats for a given output format. If the requested output format is not supported, then NULL should be returned, otherwise the bus format negociation will end with a bus format that the encoder does not support. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/ab25925723cff2f3e773e7137567ef86fff5fdba.1649330171.git.hns@goldelico.com
2022-04-11drm/bridge: display-connector: add ddc-en gpio supportH. Nikolaus Schaller
"hdmi-connector.yaml" bindings defines an optional property "ddc-en-gpios" for a single gpio to enable DDC operation. Usually this controls +5V power on the HDMI connector. This +5V may also be needed for HPD. This was not reflected in code but is needed to make the CI20 board work. Now, the driver activates the ddc gpio after probe and deactivates after remove so it is "almost on". But only if this driver is loaded (and not e.g. blacklisted as module). Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/3607e924b7c0cf0be956c0d49894be1442dbda41.1649330171.git.hns@goldelico.com
2022-04-11drm/ttm: fix logic inversion in ttm_eu_reserve_buffersChristian König
That should have been max, not min. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: c8d4c18bfbc4 ("dma-buf/drivers: make reserving a shared slot mandatory v4") Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411134537.2854-1-christian.koenig@amd.com
2022-04-11drm/i915: Swap ret and status returned from skl_pcode_requestStanislav Lisovskiy
If ret isn't zero, it is almost for sure ETIMEDOUT, because we use it in wait_for macro which does continuous retries until timeout is reached. If we still ran out of time and retries, we most likely would be interested in getting status, to understand what was the actual error propagated from PCode, rather than to find out that we had a time out, which is anyway quite obvious, if the function fails. v2: Make it status ? status : ret(thanks Vinod for the hint) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411081343.18099-1-stanislav.lisovskiy@intel.com
2022-04-11drm/i915: Fix skl_pcode_try_request functionStanislav Lisovskiy
Currently skl_pcode_try_request function doesn't properly handle return value it gets from snb_pcode_rw, but treats status != 0 as success, returning true, which basically doesn't allow to use retry/timeout mechanisms if PCode happens to be busy and returns EGAIN or some other status code not equal to 0. We saw this on real hw and also tried simulating this by always returning -EAGAIN from snb_pcode_rw for 6 times, which currently will just result in false success, while it should have tried until timeout is reached: [ 22.357729] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 [ 22.357831] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 1 [ 22.357892] i915 0000:00:02.0: [drm:skl_pcode_request [i915]] Success, exiting [ 22.357936] i915 0000:00:02.0: [drm] ERROR Failed to inform PCU about cdclk change (err -11, freq 307200) We see en error because higher level api, still notices that status was wrong, however we still did try only once. We fix it by requiring _both_ the status to be 0 and request/reply match for success(true) and function should return failure(false) if either status turns out to be EAGAIN, EBUSY or whatever or reply/request masks do not match. So now we see this in the logs: [ 22.318667] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 [ 22.318782] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 1 [ 22.318849] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 2 [ 22.319006] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 3 [ 22.319091] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 4 [ 22.319158] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 5 [ 22.319224] i915 0000:00:02.0: [drm:__snb_pcode_rw [i915]] Returning EAGAIN retry 6 Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220408125200.9069-2-stanislav.lisovskiy@intel.com
2022-04-11drm: add a check to verify the size alignmentArunpravin Paneer Selvam
Add a simple check to reject any size not aligned to the min_page_size. when size is not aligned to min_page_size, driver module should handle in their own way either to round_up() the size value to min_page_size or just to enable WARN_ON(). If we dont handle the alignment properly, we may hit the following bug, Unigine Heaven has allocation requests for example required pages are 257 and alignment request is 256. To allocate the left over 1 page, continues the iteration to find the order value which is 0 and when it compares with min_order = 8, triggers the BUG_ON(order < min_order). v2: add more commit description v3: remove WARN_ON() Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Suggested-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220411073834.15210-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2022-04-11Merge drm/drm-next into drm-intel-nextJani Nikula
Sync up with v5.18-rc1, in particular to get 5e3094cfd9fb ("drm/i915/xehpsdv: Add has_flat_ccs to device info"). Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2022-04-10Linux 5.18-rc2v5.18-rc2Linus Torvalds
2022-04-10Merge tag 'tty-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "This is a single serial driver fix for a build issue that showed up due to changes that came in through the tty tree in 5.18-rc1 that were missed previously. It resolves a build error with the mpc52xx_uart driver. It has been in linux-next this week with no reported problems" * tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
2022-04-10Merge tag 'staging-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 5.18-rc2 that resolves an endian issue for the r8188eu driver. It has been in linux-next all this week with no reported problems" * tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Fix PPPoE tag insertion on little endian systems
2022-04-10Merge tag 'driver-core-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are two small driver core changes for 5.18-rc2. They are the final bits in the removal of the default_attrs field in struct kobj_type. I had to wait until after 5.18-rc1 for all of the changes to do this came in through different development trees, and then one new user snuck in. So this series has two changes: - removal of the default_attrs field in the powerpc/pseries/vas code. The change has been acked by the PPC maintainers to come through this tree - removal of default_attrs from struct kobj_type now that all in-kernel users are removed. This cleans up the kobject code a little bit and removes some duplicated functionality that confused people (now there is only one way to do default groups) Both of these have been in linux-next for all of this week with no reported problems" * tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: kobj_type: remove default_attrs powerpc/pseries/vas: use default_groups in kobj_type
2022-04-10Merge tag 'char-misc-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fix from Greg KH: "A single driver fix. It resolves the build warning issue on 32bit systems in the habannalabs driver that came in during the 5.18-rc1 merge cycle. It has been in linux-next for all this week with no reported problems" * tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Fix test build failures
2022-04-10Merge tag 'powerpc-5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the guest could be lost (or delayed until the next guest exit). - Disable SCV (system call vectored) when PR KVM guests could be run. - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR guests. - Add a new KVM CAP to indicate if AIL == 3 is supported. - Fix a regression when hotplugging a CPU to a memoryless/cpuless node. - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which fixes crashes seen due to hardened usercopy. - Revert a change to max_mapnr which broke HIGHMEM. Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin, and Srikar Dronamraju. * tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc: Set max_mapnr correctly" powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h powerpc/numa: Handle partially initialized numa nodes powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3 KVM: PPC: Book3S PR: Disallow AIL != 0 KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled KVM: PPC: Book3S HV P9: Fix "lost kick" race
2022-04-10Merge tag 'irq-urgent-2022-04-10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - A fix for a long standing bug in the ARM GICv3 redistributor polling which uses the wrong bit number to test. - Prevent translation of bogus ACPI table entries which map device interrupts into the IPI space on ARM GICs. - Don't write into the pending register of ARM GICV4 before the scan in hardware has completed. - A set of build and correctness fixes for the Qualcomm MPM driver" * tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic, gic-v3: Prevent GSI to SGI translations irqchip/gic-v3: Fix GICR_CTLR.RWP polling irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init() irq/qcom-mpm: Fix build error without MAILBOX
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-10Merge tag 'perf_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - A couple of fixes to cgroup-related handling of perf events - A couple of fixes to event encoding on Sapphire Rapids - Pass event caps of inherited events so that perf doesn't fail wrongly at fork() - Add support for a new Raptor Lake CPU * tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Always set cpuctx cgrp when enable cgroup event perf/core: Fix perf_cgroup_switch() perf/core: Use perf_cgroup_info->active to check if cgroup is active perf/core: Don't pass task around when ctx sched in perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids perf/x86/intel: Don't extend the pseudo-encoding to GP counters perf/core: Inherit event_caps perf/x86/uncore: Add Raptor Lake uncore support perf/x86/msr: Add Raptor Lake CPU support perf/x86/cstate: Add Raptor Lake support perf/x86: Add Intel Raptor Lake support
2022-04-10Merge tag 'locking_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Allow the compiler to optimize away unused percpu accesses and change the local_lock_* macros back to inline functions - A couple of fixes to static call insn patching * tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "mm/page_alloc: mark pagesets as __maybe_unused" Revert "locking/local_lock: Make the empty local_lock_*() function a macro." x86/percpu: Remove volatile from arch_raw_cpu_ptr(). static_call: Remove __DEFINE_STATIC_CALL macro static_call: Properly initialise DEFINE_STATIC_CALL_RET0() static_call: Don't make __static_call_return0 static x86,static_call: Fix __static_call_return0 for i386
2022-04-10Merge tag 'sched_urgent_for_v5.18_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Use the correct static key checking primitive on the IRQ exit path - Two fixes for the new forceidle balancer * tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix compile error in dynamic_irqentry_exit_cond_resched() sched: Teach the forced-newidle balancer about CPU affinity limitation. sched/core: Fix forceidle balancing
2022-04-09Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the clang command line option probing and remove some options to filter out, fixing the build with the latest clang versions - Fix 'perf bench' futex and epoll benchmarks to deal with machines with more than 1K CPUs - Fix 'perf test tsc' error message when not supported - Remap perf ring buffer if there is no space for event, fixing perf usage in 32-bit ChromeOS - Drop objdump stderr to avoid getting stuck waiting for stdout output in 'perf annotate' - Fix up garbled output by now showing unwind error messages when augmenting frame in best effort mode - Fix perf's libperf_print callback, use the va_args eprintf() variant - Sync vhost and arm64 cputype headers with the kernel sources - Fix 'perf report --mem-mode' with ARM SPE - Add missing external commands ('iiostat', etc) to 'perf --list-cmds' * tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output perf tools: Add external commands to list-cmds perf docs: Add perf-iostat link to manpages perf session: Remap buf if there is no space for event perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K perf tools: Fix perf's libperf_print callback perf: arm-spe: Fix perf report --mem-mode perf unwind: Don't show unwind error messages when augmenting frame pointer stack tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test tsc: Fix error message when not supported perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13 perf python: Fix probing for some clang command line options tools build: Filter out options and warnings not supported by clang tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts tools include UAPI: Sync linux/vhost.h with the kernel sources
2022-04-09Merge tag 'cxl+nvdimm-for-5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull cxl and nvdimm fixes from Dan Williams: - Fix a compile error in the nvdimm unit tests - Fix a shadowed variable warning in the CXL PCI driver * tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/pci: Drop shadowed variable tools/testing/nvdimm: Fix security_init() symbol collision
2022-04-09Merge tag 'gpio-fixes-for-v5.18-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix a race condition with consumers accessing the fields of GPIO IRQ chips before they're fully initialized * tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: Restrict usage of GPIO chip irq members before initialization
2022-04-09Merge tag 'irqchip-fixes-5.18-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix GICv3 polling for RWP in redistributors - Reject ACPI attempts to use SGIs on GIC/GICv3 - Fix unpredictible behaviour when making a VPE non-resident with GICv4 - A couple of fixes for the newly merged qcom-mpm driver Link: https://lore.kernel.org/lkml/20220409094229.267649-1-maz@kernel.org
2022-04-09perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout ↵Ian Rogers
output If objdump writes to stderr it can block waiting for it to be read. As perf doesn't read stderr then progress stops with perf waiting for stdout output. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Denis Nikitin <denik@chromium.org> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lexi Shao <shaolexi@huawei.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Remi Bernon <rbernon@codeweavers.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: William Cohen <wcohen@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20220407230503.1265036-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Add external commands to list-cmdsMichael Petlan
The `perf --list-cmds` output prints only internal commands, although there is no reason for that from users' perspective. Adding the external commands to commands array with NULL function pointer allows printing all perf commands while not changing the logic of command handler selection. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-2-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf docs: Add perf-iostat link to manpagesMichael Petlan
Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220404221541.30312-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf session: Remap buf if there is no space for eventDenis Nikitin
If a perf event doesn't fit into remaining buffer space return NULL to remap buf and fetch the event again. Keep the logic to error out on inadequate input from fuzzing. This fixes perf failing on ChromeOS (with 32b userspace): $ perf report -v -i perf.data ... prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data? Error: failed to process sample Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Denis Nikitin <denik@chromium.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09drm/i915/uncore: Warn only if unclaimed access remains flaggedLucas De Marchi
Commit 4b276ed3c7ac ("drm/i915/uncore: Warn on previous unclaimed accesses") tried to improve our report of unclaimed register access, however it unveiled cases that were not previously causing any harm. Downgrade the first message to debug so we can still see them and eventually fix, but don't warn. Fixes: 4b276ed3c7ac ("drm/i915/uncore: Warn on previous unclaimed accesses") Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220408164837.3845786-1-lucas.demarchi@intel.com
2022-04-09Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - add support for new devices (ufs, mvsas) - a major set of fixes in lpfc - get rid of a driver specific ioctl in pcmraid - a major rework of aha152x to get rid of the scsi_pointer. - minor fixes and obvious changes including several spelling updates. * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan scsi: ufs: ufshpb: Fix a NULL check on list iterator scsi: sd: Clean up gendisk if device_add_disk() failed scsi: message: fusion: Remove redundant variable dmp scsi: mvsas: Add PCI ID of RocketRaid 2640 scsi: sd: sd_read_cpr() requires VPD pages scsi: mpt3sas: Fail reset operation if config request timed out scsi: sym53c500_cs: Stop using struct scsi_pointer scsi: ufs: ufs-pci: Add support for Intel MTL scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch" scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch" scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() scsi: aic7xxx: Use standard PCI subsystem, subdevice defines scsi: ufs: qcom: Drop custom Android boot parameters scsi: core: sysfs: Remove comments that conflict with the actual logic scsi: hisi_sas: Remove stray fallthrough annotation scsi: virtio-scsi: Eliminate anonymous module_init & module_exit scsi: isci: Fix spelling mistake "doesnt" -> "doesn't" ...
2022-04-09perf bench: Fix epoll bench to correct usage of affinity for machines with ↵Athira Rajeev
#CPUs > 1K The 'perf bench epoll' testcase fails on systems with more than 1K CPUs. Testcase: perf bench epoll all Result snippet: <<>> Run summary [PID 106497]: 1399 threads monitoring on 64 file-descriptors for 8 secs. perf: pthread_create: No such file or directory <<>> In epoll benchmarks (ctl, wait) pthread_create is invoked in do_threads from respective bench_epoll_* function. Though the logs shows direct failure from pthread_create, the actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the epoll benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf bench: Fix futex bench to correct usage of affinity for machines with ↵Athira Rajeev
#CPUs > 1K The 'perf bench futex' testcase fails on systems with more than 1K CPUs. Testcase: perf bench futex all Failure snippet: <<>>Running futex/hash benchmark... perf: pthread_create: No such file or directory <<>> All the futex benchmarks (ie hash, lock-api, requeue, wake, wake-parallel), pthread_create is invoked in respective bench_futex_* function. Though the logs shows direct failure from pthread_create, strace logs showed that actual failure is from "sched_setaffinity" returning EINVAL (invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros. Patch addresses this by fixing all the futex benchmarks to use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size, and CPU_SET_S to set the mask. Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220406175113.87881-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf tools: Fix perf's libperf_print callbackAdrian Hunter
eprintf() does not expect va_list as the type of the 4th parameter. Use veprintf() because it does. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()") Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf: arm-spe: Fix perf report --mem-modeJames Clark
Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't allow opening the file unless one of the events has PERF_SAMPLE_DATA_SRC set. SPE doesn't have this set even though synthetic memory data is generated after it is decoded. Fix this issue by setting DATA_SRC on SPE events. This has no effect on the data collected because the SPE driver doesn't do anything with that flag and doesn't generate samples. Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") Signed-off-by: James Clark <james.clark@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf unwind: Don't show unwind error messages when augmenting frame pointer ↵James Clark
stack Commit Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") intended to add a 'best effort' DWARF unwind that improved the frame pointer stack in most scenarios. It's expected that the unwind will fail sometimes, but this shouldn't be reported as an error. It only works when the return address can be determined from the contents of the link register alone. Fix the error shown when the unwinder requires extra registers by adding a new flag that suppresses error messages. This flag is not set in the normal --call-graph=dwarf unwind mode so that behavior is not changed. Fixes: b9f6fbb3b2c29736 ("perf arm64: Inject missing frames when using 'perf record --call-graph=fp'") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: James Clark <james.clark@arm.com> Tested-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Truong <alexandre.truong@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220406145651.1392529-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: 83bea32ac7ed37bb ("arm64: Add part number for Arm Cortex-A78AE") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Ali Saidi <alisaidi@amazon.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Chanho Park <chanho61.park@samsung.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf test tsc: Fix error message when not supportedChengdong Li
By default `perf test tsc` does not return the error message when the child process detected kernel does not support it. Instead, the child process prints an error message to stderr, unfortunately stderr is redirected to /dev/null when verbose <= 0. This patch does: - return TEST_SKIP to the parent process instead of TEST_OK when perf_read_tsc_conversion() is not supported. - Add a new subtest of testing if TSC is supported on current architecture by moving exist code to a separate function. It avoids two places in test__perf_time_to_tsc() that return TEST_SKIP by doing this. - Extend the test suite definition to contain above two subtests. Current test_suite and test_case structs do not support printing skip reason when the number of subtest less than 1. To print skip reason, it is necessary to extend current test suite definition. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chengdong Li <chengdongli@tencent.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: likexu@tencent.com Link: https://lore.kernel.org/r/20220408084748.43707-1-chengdongli@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-09perf build: Don't use -ffat-lto-objects in the python feature test when ↵Arnaldo Carvalho de Melo
building with clang-13 Using -ffat-lto-objects in the python feature test when building with clang-13 results in: clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument] error: command '/usr/sbin/clang' failed with exit code 1 cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1 Noticed when building on a docker.io/library/archlinux:base container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Fangrui Song <maskray@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Keeping <john@metanate.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 04:21:22 +0000