| Age | Commit message (Collapse) | Author |
|---|
|
Simon Horman says:
====================
nfp: fix incorrect IPsec checksum handling
this short series resolves two problems with IPsec checksum handling
in the nfp driver.
* PATCH 1/3, 2/3: Correct setting of checksum flags.
One patch for each of the nfd3 and nfdk datapaths.
* Patch 3/3: Correct configuration of NETIF_F_CSUM_MASK
so that the stack does not unecessarily calculate csums for
IPsec offload packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When esp-tx-csum-offload is set to on, the protocol stack shouldn't
calculate the IPsec offload packet's csum, but it does. Because the
callback `.ndo_features_check` incorrectly masked NETIF_F_CSUM_MASK bit.
Fixes: 57f273adbcd4 ("nfp: add framework to support ipsec offloading")
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The csum flag of IPsec packet are set repeatedly. Therefore, the csum
flag set of IPsec and non-IPsec packet need to be distinguished.
As the ipv6 header does not have a csum field, so l3-csum flag is not
required to be set for ipv6 case.
Fixes: 436396f26d50 ("nfp: support IPsec offloading for NFP3800")
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The csum flag of IPsec packet are set repeatedly. Therefore, the csum
flag set of IPsec and non-IPsec packet need to be distinguished.
As the ipv6 header does not have a csum field, so l3-csum flag is not
required to be set for ipv6 case.
L4-csum flag include the tcp csum flag and udp csum flag, we shouldn't
set the udp and tcp csum flag at the same time for one packet, should
set l4-csum flag according to the transport layer is tcp or udp.
Fixes: 57f273adbcd4 ("nfp: add framework to support ipsec offloading")
Signed-off-by: Huanhuan Wang <huanhuan.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice:
Reimplement module reads used by ethtool") In this refactor,
ice_get_module_eeprom() reads the eeprom in blocks of size 8.
But the condition that should protect the buffer overflow
ignores the last block. The last block always contains zeros.
Bug uncovered by ethtool upstream commit 9538f384b535
("netlink: eeprom: Defer page requests to individual parsers")
After this commit, ethtool reads a block with length = 1;
to read the SFF-8024 identifier value.
unpatched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 00 00 00 00 00 00
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00
$
$ ethtool -m enp65s0f0np0
Offset Values
------ ------
0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00
0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
patched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78
$ ethtool -m enp65s0f0np0
Identifier : 0x11 (QSFP28)
Extended identifier : 0x00
Extended identifier description : 1.5W max. Power consumption
Extended identifier description : No CDR in TX, No CDR in RX
Extended identifier description : High Power Class (> 3.5 W) not enabled
Connector : 0x23 (No separable connector)
Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Transceiver type : 40G Ethernet: 40G Base-CR4
Transceiver type : 25G Ethernet: 25G Base-CR CA-N
Encoding : 0x05 (64B/66B)
BR, Nominal : 25500Mbps
Rate identifier : 0x00
Length (SMF,km) : 0km
Length (OM3 50um) : 0m
Length (OM2 50um) : 0m
Length (OM1 62.5um) : 0m
Length (Copper or Active cable) : 1m
Transmitter technology : 0xa0 (Copper cable unequalized)
Attenuation at 2.5GHz : 4db
Attenuation at 5.0GHz : 5db
Attenuation at 7.0GHz : 7db
Attenuation at 12.9GHz : 10db
........
....
Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
tools: ynl: fix subset use and change default value for attrs/ops
Fix a problem in subsetting, which will become apparent when
the devlink family comes after the merge window. Even tho none
of the existing families need this, we don't want someone to
get "inspired" by the current, incorrect code when using specs
in other languages.
Change the default value for the first attr/op. This is a slight
behavior change so needs to go in now. The diffstat of the last
patch should serve as the clearest justification there..
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the codegen rules had been changed we can update
the specs to reflect the new default.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pretty much all families use value: 1 or reserve as unspec
the first entry in attribute set and the first operation.
Make this the default. Update documentation (the doc for
values of operations just refers back to doc for attrs
so updating only attrs).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To avoid having to repeat the entire definition of an attribute
(including the value) use the Attr object from the original set.
In fact this is already the documented expectation.
Fixes: be5bea1cc0bf ("net: add basic C code generators for Netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
ieee802154 for net 2023-03-02
Two small fixes this time.
Alexander Aring fixed a potential negative array access in the ca8210
driver.
Miquel Raynal fixed a crash that could have been triggered through
the extended netlink API for 802154. This only came in this merge window.
Found by syzkaller.
* tag 'ieee802154-for-net-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: Prevent user from crashing the host
ca8210: fix mac_len negative array access
====================
Link: https://lore.kernel.org/r/20230302153032.1312755-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported use-after-free in cfusbl_device_notify() [1]. This
causes a stack trace like below:
BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214
CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10227 [inline]
netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341
default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334
ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
When unregistering a net device, unregister_netdevice_many_notify()
sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers
with NETDEV_UNREGISTER, and adds the device to the todo list.
Later on, devices in the todo list are processed by netdev_run_todo().
netdev_run_todo() waits devices' reference count become 1 while
rebdoadcasting NETDEV_UNREGISTER notification.
When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple
times, the parent device might be freed. This could cause UAF.
Processing NETDEV_UNREGISTER multiple times also causes inbalance of
reference count for the module.
This patch fixes the issue by accepting only first NETDEV_UNREGISTER
notification.
Fixes: 7ad65bf68d70 ("caif: Add support for CAIF over CDC NCM USB interface")
CC: sjur.brandeland@stericsson.com <sjur.brandeland@stericsson.com>
Reported-by: syzbot+b563d33852b893653a9e@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c3bfd8e2450adab3bffe4d80821fbbced600407f [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230301163913.391304-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
from the MAC driver
Move the LAN7800 internal phy (phy ID 0x0007c132) specific register
accesses to the phy driver (microchip.c).
Fix the error reported by Enguerrand de Ribaucourt in December 2022,
"Some operations during the cable switch workaround modify the register
LAN88XX_INT_MASK of the PHY. However, this register is specific to the
LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801,
that register (0x19), corresponds to the LED and MAC address
configuration, resulting in unapropriate behavior."
I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800
with the internal PHY.
Fixes: 14437e3fa284 ("lan78xx: workaround of forced 100 Full/Half duplex mode error")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dikshita's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-2-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Vikash's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-3-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).
Fixes: cf948cbc35e80 ("cramfs: read_mapping_page() is synchronous")
Reported-by: syzbot <syzbot+8ce7f8308d91e6b8bbe2@syzkaller.appspotmail.com>
Link: https://lkml.kernel.org/r/0000000000008f74e905f56df987@google.com
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.
As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.
To fix this error, we move all iput calls before hfsplus_btree_close.
Note that this patch is tested on Syzbot.
Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in
panic_print") introduced a setting for the "panic_print" kernel parameter
to allow users to request a NMI backtrace on panic. Problem is that the
panic_print handling happens after the secondary CPUs are already
disabled, hence this option ended-up being kind of a no-op - kernel skips
the NMI trace in idling CPUs, which is the case of offline CPUs.
Fix it by checking the NMI backtrace bit in the panic_print prior to the
CPU disabling function.
Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com
Fixes: 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: <stable@vger.kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local
array") removed -ENOMEM as a possible return value, so update the comments
accordingly.
Link: https://lkml.kernel.org/r/20230224042618.9092-1-ebiggers@kernel.org
Fixes: 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local array")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Li Lingfeng <lilingfeng3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that memcpy/memset/memmove are no longer overridden by KASAN, we can
just use the normal symbol names in uninstrumented files.
Drop the preprocessor redefinitions.
Link: https://lkml.kernel.org/r/20230224085942.1791837-4-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The tests for memset/memmove have been failing since they haven't been
instrumented in 69d4c0d32186.
Fix the test to recognize when memintrinsics aren't instrumented, and skip
test cases accordingly. We also need to conditionally pass -fno-builtin
to the test, otherwise the instrumentation pass won't recognize
memintrinsics and end up not instrumenting them either.
Link: https://lkml.kernel.org/r/20230224085942.1791837-3-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Where the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, let the compiler consider
memintrinsics as builtin again.
To do so, never override memset/memmove/memcpy if the compiler does the
correct instrumentation - even on !GENERIC_ENTRY architectures.
[elver@google.com: powerpc: don't rename memintrinsics if compiler adds prefixes]
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Link: https://lkml.kernel.org/r/20230224085942.1791837-2-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang 15 provides an option to prefix memcpy/memset/memmove calls with
__asan_/__hwasan_ in instrumented functions:
https://reviews.llvm.org/D122724
GCC will add support in future:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108777
Use it to regain KASAN instrumentation of memcpy/memset/memmove on
architectures that require noinstr to be really free from instrumented
mem*() functions (all GENERIC_ENTRY architectures).
Link: https://lkml.kernel.org/r/20230224085942.1791837-1-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org> # build only
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The block layer might merge together discard requests up until the
max_discard_segments limit is hit, but blk_insert_cloned_request checks
the segment count against max_segments regardless of the req op. This
can result in errors like the following when discards are issued through
a DM device and max_discard_segments exceeds max_segments for the queue
of the chosen underlying device.
blk_insert_cloned_request: over max segments limit. (256 > 129)
Fix this by looking at the req_op and enforcing the appropriate segment
limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for
everything else.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull drm fixes from Dave Airlie:
"fbdev:
- fix uninit var in error path
shmem:
- revert unGPLing an export
i915:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices
amdkfd:
- SDMA fix
- Illegal memory access fix"
* tag 'drm-next-2023-03-03-1' of git://anongit.freedesktop.org/drm/drm: (45 commits)
drm/amdgpu/vcn: fix compilation issue with legacy gcc
drm/amd/display: Extend Freesync over PCon support for more devices
Revert "drm/amd/display: Do not set DRR on pipe commit"
drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
drm/amd/display: Ext displays with dock can't recognized after resume
drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
drm/amdgpu: remove unused variable ring
drm/amd/display: fix dm irq error message in gpu recover
drm/amd: Fix initialization for nbio 7.5.1
drm/amd/display: Don't restrict bpc to 8 bpc
drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable
drm/radeon: Fix eDP for single-display iMac11,2
drm/shmem-helper: Revert accidental non-GPL export
drm: omapdrm: Do not use helper unininitialized in omap_fbdev_init()
drm/amd/pm: downgrade log level upon SMU IF version mismatch
drm/amdgpu: Add ecc info query interface for umc v8_10
drm/amdgpu: Add convert_error_address function for umc v8_10
drm/amdgpu: add bad_page_threshold check in ras_eeprom_check_err
drm/amdgpu: change default behavior of bad_page_threshold parameter
drm/amdgpu: exclude duplicate pages from UMC RAS UE count
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- In copy_highpage(), only reset the tag of the destination pointer if
KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
with KASAN_SW_TAGS (which relies on top-byte-ignore).
- Remove warning if SME is detected without SVE, the kernel can cope
with such configuration (though none in the field currently).
- In cfi_handler(), pass the ESR_EL1 value to die() for consistency
with other die() callers.
- Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
manipulation from the generic vmemmap_remap_pte() does not follow the
required ARM break-before-make sequence (clear the pte, flush the
TLBs, set the new pte). It may be re-enabled once this sequence is
sorted.
- Fix possible memory leak in the arm64 ACPI code if the SMCCC version
and conduit checks fail.
- Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
-falign-functions=N with -Os.
- Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
randomisation would actually take place.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
arm64: acpi: Fix possible memory leak of ffh_ctxt
arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
arm64: pass ESR_ELx to die() of cfi_handler
arm64/fpsimd: Remove warning for SME without SVE
arm64: Reset KASAN tag in copy_highpage with HW tags only
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.3-2023-03-02:
amdgpu:
- SMU 13 fixes
- Enable TMZ for GC 10.3.6
- Misc display fixes
- Buddy allocator fixes
- GC 11 fixes
- S0ix fix
- INFO IOCTL queries for GC 11
- VCN harvest fixes for SR-IOV
- UMC 8.10 RAS fixes
- Don't restrict bpc to 8
- NBIO 7.5 fix
- Allow freesync on PCon for more devices
amdkfd:
- SDMA fix
- Illegal memory access fix
radeon:
- Display fix for iMac11,2
UAPI:
- Add some additional INFO IOCTL queries for GC 11 fixes
Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21403
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302051843.7793-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v6.3-rc1:
- Don't use stolen memory or BAR mappings for ring buffers with LLC
- Add inverted backlight quirk for HP 14-r206nv
- Fix GSI offset for MCR lookups
- GVT fixes (memleak, debugfs attributes, kconfig, typos)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cz5v2z0j.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
Fixes uninitialized variables in fbdev error paths and reverts an
SHMEM-helper symbol back to being exported as GPL.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/3Fw1HjgPcplo+j@linux-uq9g
|
|
To address this build error:
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
EXPORTS rust/exports_core_generated.h
RUSTC P rust/libmacros.so
RUSTC L rust/compiler_builtins.o
RUSTC L rust/alloc.o
RUSTC L rust/bindings.o
RUSTC L rust/build_error.o
EXPORTS rust/exports_alloc_generated.h
error[E0588]: packed type cannot transitively contain a `#[repr(align)]` type
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10094:1
|
10094 | / pub struct alt_instr {
10095 | | pub instr_offset: s32,
10096 | | pub repl_offset: s32,
10097 | | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
10098 | | pub instrlen: u8_,
10099 | | pub replacementlen: u8_,
10100 | | }
| |_^
|
note: `alt_instr__bindgen_ty_1__bindgen_ty_1` has a `#[repr(align)]` attribute
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10111:1
|
10111 | / pub struct alt_instr__bindgen_ty_1__bindgen_ty_1 {
10112 | | pub _bitfield_1: __BindgenBitfieldUnit<[u8; 4usize], u16>,
10113 | | }
| |_^
note: `alt_instr` contains a field of type `alt_instr__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10097:9
|
10097 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
note: ...which contains a field of type `alt_instr__bindgen_ty_1__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10104:9
|
10104 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0588`.
make[1]: *** [rust/Makefile:389: rust/bindings.o] Error 1
make: *** [Makefile:1293: prepare] Error 2
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 5d1dd961e743 ("x86/alternatives: Add alt_instr.flags")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
When creating counters with initial delay configured, the enable_on_exec
field is not set. So we need to enable the counters later. The problem
is, when a workload is specified the target__none() is true. So we also
need to check stat_config.initial_delay.
In this change, we add a new field 'initial_delay' for struct target
which could be shared by other subcommands. And define
target__enable_on_exec() which returns whether enable_on_exec should be
set on normal cases.
Before this fix the event is not counted:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
<not counted> instructions
1.901661124 seconds time elapsed
0.001602000 seconds user
0.000000000 seconds sys
After fix it works:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
404,214 instructions
1.901743475 seconds time elapsed
0.001617000 seconds user
0.000000000 seconds sys
Fixes: c587e77e100fa40e ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230302031146.2801588-2-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
8c29f01654053258 ("x86/sev: Add SEV-SNP guest feature negotiation support")
That triggers:
CC /tmp/build/perf-tools/arch/x86/util/kvm-stat.o
CC /tmp/build/perf-tools/util/header.o
LD /tmp/build/perf-tools/arch/x86/util/perf-in.o
LD /tmp/build/perf-tools/arch/x86/perf-in.o
LD /tmp/build/perf-tools/arch/perf-in.o
LD /tmp/build/perf-tools/util/perf-in.o
LD /tmp/build/perf-tools/perf-in.o
LINK /tmp/build/perf-tools/perf
But this time causes no changes in tooling results, as the introduced
SVM_VMGEXIT_TERM_REQUEST exit reason wasn't added to SVM_EXIT_REASONS,
that is used in kvm-stat.c.
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- qcom-wdt dt-bindings improvements and additions (like MSM8994 and
MDM9615)
- mtk_wdt: Add reset_by_toprgu support
- devm_clk_get_enabled() helper changes
- Fix kmemleak in watchdog_cdev_register
- watchdog sysfs improvements
- Other fixes and small improvements
* tag 'linux-watchdog-6.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (52 commits)
watchdog: at91rm9200: Only warn once about problems in .remove()
watchdog: mt7621-wdt: avoid ralink architecture dependent code
watchdog: mt7621-wdt: avoid static global declarations
dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers
watchdog: sbsa_wdog: Make sure the timeout programming is within the limits
dt-bindings: watchdog: qcom-wdt: add qcom,apss-wdt-sa8775p compatible
watchdog: report options in sysfs
watchdog: report fw_version in sysfs
dt-bindings: watchdog: fsl-imx: document suspend in wait mode
watchdog: imx2_wdg: suspend watchdog in WAIT mode
watchdog: pcwd_usb: Fix attempting to access uninitialized memory
dt-bindings: watchdog: qcom-wdt: merge MSM timer
dt-bindings: watchdog: qcom-wdt: allow interrupts
dt-bindings: watchdog: qcom-wdt: add qcom,kpss-wdt-mdm9615
dt-bindings: watchdog: qcom-wdt: fix list of MSM timer compatibles
dt-bindings: watchdog: qcom-wdt: do not allow fallback alone
dt-bindings: watchdog: qcom-wdt: require fallback for IPQ4019
watchdog: Fix kmemleak in watchdog_cdev_register
watchdog: Include <linux/kstrtox.h> when appropriate
watchdog: at91sam9_wdt: use devm_request_irq to avoid missing free_irq() in error path
...
|
|
Pull ceph fixes from Ilya Dryomov:
"Two small fixes from Xiubo and myself, marked for stable"
* tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client:
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
ceph: update the time stamps and try to drop the suid/sgid
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull more MIPS updates from Thomas Bogendoerfer:
"A few more cleanups and fixes"
* tag 'mips_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Workaround clang inline compat branch issue
mips: dts: ralink: mt7621: add phandle to system controller node for watchdog
mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog'
mips: ralink: make SOC_MT7621 select PINCTRL
mips: remove SYS_HAS_CPU_MIPS32_R1 from RALINK
MIPS: cevt-r4k: Offset the value used to clear compare interrupt
MIPS: smp-cps: Don't rely on CP0_CMGCRBASE
MIPS: Remove DMA_PERDEV_COHERENT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Shrink 'struct instruction', to improve objtool performance & memory
footprint
- Other maximum memory usage reductions - this makes the build both
faster, and fixes kernel build OOM failures on allyesconfig and
similar configs when they try to build the final (large) vmlinux.o
- Fix ORC unwinding when a kprobe (INT3) is set on a stack-modifying
single-byte instruction (PUSH/POP or LEAVE). This requires the
extension of the ORC metadata structure with a 'signal' field
- Misc fixes & cleanups
* tag 'objtool-core-2023-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Fix ORC 'signal' propagation
objtool: Remove instruction::list
x86: Fix FILL_RETURN_BUFFER
objtool: Fix overlapping alternatives
objtool: Union instruction::{call_dest,jump_table}
objtool: Remove instruction::reloc
objtool: Shrink instruction::{type,visited}
objtool: Make instruction::alts a single-linked list
objtool: Make instruction::stack_ops a single-linked list
objtool: Change arch_decode_instruction() signature
x86/entry: Fix unwinding from kprobe on PUSH/POP instruction
x86/unwind/orc: Add 'signal' field to ORC metadata
objtool: Optimize layout of struct special_alt
objtool: Optimize layout of struct symbol
objtool: Allocate multiple structures with calloc()
objtool: Make struct check_options static
objtool: Make struct entries[] static and const
objtool: Fix HOSTCC flag usage
objtool: Properly support make V=1
objtool: Install libsubcmd in build
...
|
|
Pull auxdisplay fix from Miguel Ojeda:
- hd44780: Fix potential memory leak in hd44780_remove() (Jianglei Nie)
* tag 'auxdisplay-6.3' of https://github.com/ojeda/linux:
auxdisplay: hd44780: Fix potential memory leak in hd44780_remove()
|
|
openrisc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
nios2 equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is another small set of driver core patches.
They resolve some reported problems with the previous driver core
patches that are in your tree.
They solve a problem with the bus_type cleanup as reported and fixed
by Geert, and two fw_devlink changes to make debugging problems
easier.
There is one known outstanding problem with the fw_deflink changes in
your tree that is still being worked on, and it looks like a clk core
change will be submitted soon for that, probably after 6.3-rc1.
All three of these have been in linux-next with no reported problems
(only reports that they fixed problems)"
* tag 'driver-core-6.3-rc1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: fw_devlink: Print full path and name of fwnode
driver core: fw_devlink: Avoid spurious error message
driver core: bus: Handle early calls to bus_to_subsys()
|
|
microblaze equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ia64 equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
sparc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
alpha equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
parisc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
hexagon equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Acked-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
riscv equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
m68k equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes for SPI drivers, Krishna has been doing a bunch
of work on Tegra210 QuadSPI and found a bunch of issues there and
there's a couple of small fixes for other drivers too"
* tag 'spi-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra210-quad: Fix iterator outside loop
spi: tegra210-quad: Fix validate combined sequence
spi: tegra210-quad: set half duplex flag
spi: spi-sn-f-ospi: fix duplicate flag while assigning to mode_bits
spi: cadence-quadspi: Fix cancel the indirect read mask
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two fixes here, one driver fix for incorrect error codes and a fix in
the core to use ktime_get_boottime() in order to fix accounting of the
time regulators have been powered down over suspend. ktime_get()
pauses over suspend which is not what we want"
* tag 'regulator-fix-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: Use ktime_get_boottime() to determine how long a regulator was off
regulator: max597x: Fix error return code in max597x_get_status
|
|
Miquel reported a warning in the MSI core which is triggered when
interrupts are freed via platform_msi_device_domain_free().
This code got reworked to use core functions for freeing the MSI
descriptors, but nothing took care to clear the msi_desc->irq entry, which
then triggers the warning in msi_free_msi_desc() which uses desc->irq to
validate that the descriptor has been torn down. The same issue exists in
msi_domain_populate_irqs().
Up to the point that msi_free_msi_descs() grew a warning for this case,
this went un-noticed.
Provide the counterpart of msi_domain_populate_irqs() and invoke it in
platform_msi_device_domain_free() before freeing the interrupts and MSI
descriptors and also in the error path of msi_domain_populate_irqs().
Fixes: 2f2940d16823 ("genirq/msi: Remove filter from msi_free_descs_free_range()")
Reported-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87mt4wkwnv.ffs@tglx
|
