summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-24Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: * Convert the trace builtins to use the growing evsel/evlist tracepoint infrastructure, removing several open coded constructs like switch like series of strcmp to dispatch events, etc. Basically what had already been showcased in 'perf sched'. * Add evsel constructor for tracepoints, that uses libtraceevent just to parse the /format events file, use it in a new 'perf test' to make sure the libtraceevent format parsing regressions can be more readily caught. * Some strange errors were happening in some builds, but not on the next, reported by several people, problem was some parser related files, generated during the build, didn't had proper make deps, fix from Eric Sandeen. * Fix some compiling errors on 32-bit, from Feng Tang. * Don't use sscanf extension %as, not available on bionic, reimplementation by Irina Tirdea. * Fix bfd.h/libbfd detection with recent binutils, from Markus Trippelsdorf. * Introduce struct and cache information about the environment where a perf.data file was captured, from Namhyung Kim. * Fix several error paths in libtraceevent, from Namhyung Kim. Print event causing perf_event_open() to fail in 'perf record', from Stephane Eranian. * New 'kvm' analysis tool, from Xiao Guangrong. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24c6x: use asm-generic/barrier.hMark Salter
A recent patch in the linux-next tree caused a build failure on C6X because C6X didn't define a read_barrier_depends() macro. C6X does not support SMP and the architecture doesn't provide any special memory ordering instructions, so it makes sense to just use the generic barrier.h rather than patching the existing c6x specific header. Signed-off-by: Mark Salter <msalter@redhat.com>
2012-09-24trace: Move trace event enable from fs_initcall to core_initcallEzequiel Garcia
This patch splits trace event initialization in two stages: * ftrace enable * sysfs event entry creation This allows to capture trace events from an earlier point by using 'trace_event' kernel parameter and is important to trace boot-up allocations. Note that, in order to enable events at core_initcall, it's necessary to move init_ftrace_syscalls() from core_initcall to early_initcall. Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.com Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-24tracing: Add an option for disabling markersMandeep Singh Baines
In our application, we have trace markers spread through user-space. We have markers in GL, X, etc. These are super handy for Chrome's about:tracing feature (Chrome + system + kernel trace view), but can be very distracting when you're trying to debug a kernel issue. I normally, use "grep -v tracing_mark_write" but it would be nice if I could just temporarily disable markers all together. Link: http://lkml.kernel.org/r/1347066739-26285-1-git-send-email-msb@chromium.org CC: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-09-24tools lib traceevent: Handle alloc_arg failureNamhyung Kim
Now alloc_arg returns NULL if memory allocation failed, it should be handled on callsites properly. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/87k3vpzbqo.fsf_-_@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf test: Add test for the sched tracepoint format fieldsArnaldo Carvalho de Melo
So that we make sure the routines that do event format parsing are working on at least two well know scheduler tracepoints. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-g3rm9b3wtim4djx3z8dkftrj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf evsel: Provide a new constructor for tracepointsArnaldo Carvalho de Melo
The existing constructor receives a perf_event_attr filled with the event type and the config. To reduce the boilerplate for tracepoints, provide a new constructor, perf_evsel__newtp() that receives the tracepoint name and will open the debugfs file, call into libtraceevent new pevent_parse_format file to fill its ->tp_format member, so that users can then just call perf_evsel__field() to access its fields. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-6du8dl1hz0y5l4cybodye7hn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Carve out events format parsing routineArnaldo Carvalho de Melo
The pevent_parse_event() routine will parse a events/sys/tp/format file and add an event_format instance to the pevent struct. This patch introduces a pevent_parse_format() routine with just the bits needed to parse the event/sys/tp/format file and just return the event_format instance, useful for when all we want is to parse the format file, without requiring the pevent struct. Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-lge0afl47arh86om0m6a5bqr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Remove some die() callsArnaldo Carvalho de Melo
Cleaned event-parse.c this time, just propagate the errors and in handle them the call sites. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-9ebpr2vgfk2qs2841i99sa8y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Fix afterlife gotosArnaldo Carvalho de Melo
Instead of dying, just use do_warning and let the goto that is there to take place. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-aoaus46ngnt9oc2pt7ckot5d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Use calloc were applicableArnaldo Carvalho de Melo
Replacing the equivalent open coded malloc + memset bits. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-598fjtjbzal4wxh7fp0yv0q1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Use asprintf were applicableArnaldo Carvalho de Melo
Replacing the equivalent open coded malloc + sprintf bits. Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/n/tip-ghokwtdw2hgmmmn7oa9s03r4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf tools: bfd.h/libbfd detection fails with recent binutilsMarkus Trippelsdorf
With recent binutils I get: perf % make Makefile:668: No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demanglin That happens because bfd.h now contains: I've reopened a bug in the hope that this check will be deleted: http://sourceware.org/bugzilla/show_bug.cgi?id=14243 But in the meantime, the following patch fixes the problem Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20120919072902.GA262@x4 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Free field if an error occurs on process_flags/symbolsNamhyung Kim
The field should be freed on error paths. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1348037924-17568-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Free field if an error occurs on process_fieldsNamhyung Kim
The field should be freed on error paths. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1348037924-17568-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Make sure that arg->op.right is set properlyNamhyung Kim
When process_op failed, @arg will be freed on a caller with type of PRINT_OP. Thus free_arg() will try to free ->op.right field which can have stale value if something bad happens in the middle. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1348037924-17568-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24tools lib traceevent: Fix error path on process_array()Namhyung Kim
free_token() under out_free should be called with 'token' and no need to set *tok to NULL since it's set already. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1348037924-17568-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf tools: remove sscanf extension %asIrina Tirdea
perf uses sscanf extension %as to read and allocate a string in the same step. This is a non-standard extension only present in new versions of glibc. Replacing the use of sscanf and %as with strtok_r calls in order to parse a given string into its components. This is needed in Android since bionic does not support %as extension for sscanf. Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1348173470-4936-1-git-send-email-irina.tirdea@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf header: Remove perf_header__read_featureNamhyung Kim
Because its only user builtin-kvm::get_cpu_isa() has gone, It can be removed safely. In general, we have the feature information in perf_session_env already, no need to read it again. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Dong Hao <haodong@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1348474503-15070-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf kvm: Use perf_session_env for reading cpuidNamhyung Kim
We have processed and saved cpuid information to perf_session_env so reuse it for get_cpu_isa(). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Dong Hao <haodong@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1348474503-15070-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf header: Remove unused @feat arg from ->process callbackNamhyung Kim
As the @feat arg is not used anywhere, get rid of it from the signature. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1348474503-15070-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf header: Use pre-processed session env when printingNamhyung Kim
From now on each feature information is processed and saved in perf header so that it can be used for printing. The event desc and branch stack features are not touched since they're not saved. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1348474503-15070-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf header: Add ->process callbacks to most of featuresNamhyung Kim
From now on each feature information is processed and saved in perf header so that it can be used wherever needed. The BRANCH_STACK feature is an exception since it needs nothing to be done. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1348474503-15070-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf header: Add struct perf_session_envNamhyung Kim
The struct perf_session_env will preserve environment information at the time of perf record. It can be accessed anytime after parsing a perf.data file if needed. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1348474503-15070-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf timechart: Use zalloc and fix a couple leaksArnaldo Carvalho de Melo
Use zalloc for the malloc+memset open coded sequence. Fix leak on the #ifdef'ed C state handling and when detecting invalid data in p_state_change(). Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf lock: Use perf_evsel__intval and perf_session__set_tracepoints_handlersArnaldo Carvalho de Melo
Following the model of 'perf sched': . raw_field_value searches first on the common fields, that are unused in this tool . Leave using perf_evsel__intval to the actual handlers, some may not need to incur some of the cost because they may not need all the fields values. . Using perf_session__set_tracepoints_handlers will save all those strcmp to find the right handler at sample processing time, do it just once and get the handler from evsel->handler.func. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf kmem: Use perf_evsel__intval and perf_session__set_tracepoints_handlersArnaldo Carvalho de Melo
Following the model of 'perf sched': . raw_field_value searches first on the common fields, that are unused in this tool . Using perf_session__set_tracepoints_handlers will save all those strcmp to find the right handler at sample processing time, do it just once and get the handler from evsel->handler.func. Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24perf kvm: Use perf_evsel__intvalArnaldo Carvalho de Melo
Using plain raw_field_value(evsel->tp_format) will look at the common fields as well, and since this tool doesn't need those, speed it up a bit by looking at just the event specific fields. Also in general use just evsel and sample, just like was done in 'perf sched'. v2: Fixed up test against evsel->name, that contains the subsys name too, by David Ahern. Cc: David Ahern <dsahern@gmail.com> Cc: Dong Hao <haodong@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-24xen/boot: Disable NUMA for PV guests.Konrad Rzeszutek Wilk
The hypervisor is in charge of allocating the proper "NUMA" memory and dealing with the CPU scheduler to keep them bound to the proper NUMA node. The PV guests (and PVHVM) have no inkling of where they run and do not need to know that right now. In the future we will need to inject NUMA configuration data (if a guest spans two or more NUMA nodes) so that the kernel can make the right choices. But those patches are not yet present. In the meantime, disable the NUMA capability in the PV guest, which also fixes a bootup issue. Andre says: "we see Dom0 crashes due to the kernel detecting the NUMA topology not by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA). This will detect the actual NUMA config of the physical machine, but will crash about the mismatch with Dom0's virtual memory. Variation of the theme: Dom0 sees what it's not supposed to see. This happens with the said config option enabled and on a machine where this scanning is still enabled (K8 and Fam10h, not Bulldozer class) We have this dump then: NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10 Scanning NUMA topology in Northbridge 24 Number of physical nodes 4 Node 0 MemBase 0000000000000000 Limit 0000000040000000 Node 1 MemBase 0000000040000000 Limit 0000000138000000 Node 2 MemBase 0000000138000000 Limit 00000001f8000000 Node 3 MemBase 00000001f8000000 Limit 0000000238000000 Initmem setup node 0 0000000000000000-0000000040000000 NODE_DATA [000000003ffd9000 - 000000003fffffff] Initmem setup node 1 0000000040000000-0000000138000000 NODE_DATA [0000000137fd9000 - 0000000137ffffff] Initmem setup node 2 0000000138000000-00000001f8000000 NODE_DATA [00000001f095e000 - 00000001f0984fff] Initmem setup node 3 00000001f8000000-0000000238000000 Cannot find 159744 bytes in node 3 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96 Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar RIP: e030:[<ffffffff81d220e6>] [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96 .. snip.. [<ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178 [<ffffffff81d23348>] sparse_init+0xe4/0x25a [<ffffffff81d16840>] paging_init+0x13/0x22 [<ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b [<ffffffff81683954>] ? printk+0x3c/0x3e [<ffffffff81d01a38>] start_kernel+0xe5/0x468 [<ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1 [<ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36 [<ffffffff81d050ee>] xen_start_kernel+0x565/0x56c " so we just disable NUMA scanning by setting numa_off=1. CC: stable@vger.kernel.org Reported-and-Tested-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-24GFS2: Write out dirty inode metadata in delayed deletesBenjamin Marzinski
If a dirty GFS2 inode was being deleted but was in use by another node, its metadata was not getting written out before GFS2 checked for dirty buffers in gfs2_ail_flush(). GFS2 was relying on inode_go_sync() to write out the metadata when the other node tried to free the file, but it failed the error check before it got that far. This patch writes out the metadata before calling gfs2_ail_flush() Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: fix s_writers.counter imbalance in gfs2_ail_empty_glEric Sandeen
gfs2_ail_empty_gl() contains an "inline version" of gfs2_trans_begin(), so it needs an explicit sb_start_intwrite() as well, to balance the sb_end_intwrite() which will be called by gfs2_trans_end(). With this, xfstest 068 passes on lock_nolock local gfs2. Without it, we reach a writer count of -1 and get stuck. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix infinite loop in rbm_findBob Peterson
This patch fixes an infinite loop in gfs2_rbm_find that was introduced by the previous patch. The problem occurred when the length was less than 3 but the rbm block was byte-aligned, causing it to improperly return a extent length of zero, which caused it to spin. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com> Tested-by: Barry Marson <bmarson@redhat.com>
2012-09-24GFS2: Consolidate free block searching functionsSteven Whitehouse
With the recently added block reservation code, an additional function was added to search for free blocks. This had a restriction of only being able to search for aligned extents of free blocks. As a result the allocation patterns when reserving blocks were suboptimal when the existing allocation of blocks for an inode was not aligned to the same boundary. This patch resolves that problem by adding the ability for gfs2_rbm_find to search for extents of a particular minimum size. We can then use gfs2_rbm_find for both looking for reservations, and also looking for free blocks on an individual basis when we actually come to do the allocation later on. As a result we only need a single set of code to deal with both situations. The function gfs2_rbm_from_block() is moved up rgrp.c so that it occurs before all of its callers. Many thanks are due to Bob for helping track down the final issue in this patch. That fix to the rb_tree traversal and to not share block reservations from a dirctory to its children is included here. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2012-09-24GFS2: Get rid of I_MUTEX_QUOTA usageJan Kara
GFS2 uses i_mutex on its system quota inode to synchronize writes to quota file. Since this is an internal inode to GFS2 (not part of directory hiearchy or visible by user) we are safe to define locking rules for it. So let's just get it its own locking class to make it clear. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Stop block extents at the end of bitmapsBob Peterson
This patch stops multiple block allocations if a nonzero return code is received from gfs2_rbm_from_block. Without this patch, if enough pressure is put on the file system, you get a kernel warning quickly followed by: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa04f47e8>] gfs2_alloc_blocks+0x2c8/0x880 [gfs2] With this patch, things run normally. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix unclaimed_blocks() wrapping bug and clean upSteven Whitehouse
When rgd->rd_free_clone is less than rgd->rd_reserved, the unclaimed_blocks() calculation would wrap and produce incorrect results. This patch checks for this condition when this function is called from gfs2_mblk_search() In addition, the use of this particular function in other places in the code has been dropped by means of a general clean up of gfs2_inplace_reserve(). This function is now much easier to follow. Also the setting of the rgd->rd_last_alloc field is corrected. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Improve block reservation tracingSteven Whitehouse
This patch improves the tracing of block reservations by removing some corner cases and also providing more useful detail in the traces. A new field is added to the reservation structure to contain the inode number. This is used since in certain contexts it is not possible to access the inode itself to obtain this information. As a result we can then display the inode number for all tracepoints and also in case we dump the resource group. The "del" tracepoint operation has been removed. This could be called with the reservation rgrp set to NULL. That resulted in not printing the device number, and thus making the information largely useless anyway. Also, the conditional on the rgrp being NULL can then be removed from the tracepoint. After this change, all the block reservation tracepoint calls will be called with the rgrp information. The existing ins,clm and tdel calls to the block reservation tracepoint are sufficient to track the entire life of the block reservation. In gfs2_block_alloc() the error detection is updated to print out the inode number of the problematic inode. This can then be compared against the information in the glock dump,tracepoints, etc. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fall back to ignoring reservations, if there are no other blocks leftSteven Whitehouse
When we get to the stage of allocating blocks, we know that the resource group in question must contain enough free blocks, otherwise gfs2_inplace_reserve() would have failed. So if we are left with only free blocks which are reserved, then we must use those. This can happen if another node has sneeked in and use some blocks reserved on this node, for example. Generally this will happen very rarely and only when the resouce group is nearly full. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix ->show_options() for statfs slowSteven Whitehouse
The ->show_options() function for GFS2 was not correctly displaying the value when statfs slow in in use. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Milos Jakubicek <xjakub@fi.muni.cz>
2012-09-24GFS2: Use rbm for gfs2_setbit()Steven Whitehouse
Use the rbm structure for gfs2_setbit() in order to simplify the arguments to the function. We have to add a bool to control whether the clone bitmap should be updated (if it exists) but otherwise it is a more or less direct substitution. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Use rbm for gfs2_testbit()Steven Whitehouse
Change the arguments to gfs2_testbit() so that it now just takes an rbm specifying the position of the two bit entry to return. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Eliminate unnecessary check for state > 3 in bitfitBob Peterson
Function gfs2_bitfit was checking for state > 3, but that's impossible since it is only called from rgblk_search, which receives only GFS2_BLKST_ constants. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Eliminate redundant calls to may_grantBob Peterson
Function add_to_queue was checking may_grant for the passed-in holder for every iteration of its gh2 loop. Now it only checks it once at the beginning to see if a try lock is futile. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Combine functions gfs2_glock_dq_wait and wait_on_demoteBob Peterson
Function gfs2_glock_dq_wait called two-line function wait_on_demote, so they were combined. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Combine functions gfs2_glock_wait and wait_on_holderBob Peterson
Function gfs2_glock_wait only called function wait_on_holder and returned its return code, so they were combined for readability. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: inline __gfs2_glock_schedule_for_reclaimBob Peterson
Since function gfs2_glock_schedule_for_reclaim is only two significant lines, we can eliminate it, simplifying the code and making it more readable. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: change function gfs2_direct_IO to use a normal gfs2_glock_dqBob Peterson
This patch changes function gfs2_direct_IO so that it uses a normal call to gfs2_glock_dq rather than a call to a multiple-dq of one item. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: rbm code cleanupBob Peterson
This patch fixes a few small rbm related things. First, it fixes a corner case where the rbm needs to switch bitmaps and wasn't adjusting its buffer pointer. Second, there's a white space issue fixed. Third, the logic in function gfs2_rbm_from_block was optimized a bit. Lastly, a check for goal block overflows was added to function gfs2_alloc_blocks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24GFS2: Fix case where reservation finished at end of rgrpSteven Whitehouse
One corner case which the original patch failed to take into account was when there is a reservation which ended such that the following block was one beyond the end of the rgrp in question. This extra test fixes that case. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Bob Peterson <rpeterso@redhat.com> Tested-by: Bob Peterson <rpeterso@redhat.com>
2012-09-24GFS2: Use RB_CLEAR_NODE() rather than rb_init_node()Michel Lespinasse
gfs2 calls RB_EMPTY_NODE() to check if nodes are not on an rbtree. The corresponding initialization function is RB_CLEAR_NODE(). rb_init_node() was never clearly defined and is going away. Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>