| Age | Commit message (Collapse) | Author |
|---|
|
There are 4 net namespaces involved when creating links:
- source netns - where the netlink socket resides,
- target netns - where to put the device being created,
- link netns - netns associated with the device (backend),
- peer netns - netns of peer device.
Currently, two nets are passed to newlink() callback - "src_net"
parameter and "dev_net" (implicitly in net_device). They are set as
follows, depending on netlink attributes in the request.
+------------+-------------------+---------+---------+
| peer netns | IFLA_LINK_NETNSID | src_net | dev_net |
+------------+-------------------+---------+---------+
| | absent | source | target |
| absent +-------------------+---------+---------+
| | present | link | link |
+------------+-------------------+---------+---------+
| | absent | peer | target |
| present +-------------------+---------+---------+
| | present | peer | link |
+------------+-------------------+---------+---------+
When IFLA_LINK_NETNSID is present, the device is created in link netns
first and then moved to target netns. This has some side effects,
including extra ifindex allocation, ifname validation and link events.
These could be avoided if we create it in target netns from
the beginning.
On the other hand, the meaning of src_net parameter is ambiguous. It
varies depending on how parameters are passed. It is the effective
link (or peer netns) by design, but some drivers ignore it and use
dev_net instead.
To provide more netns context for drivers, this patch packs existing
newlink() parameters, along with the source netns, link netns and peer
netns, into a struct. The old "src_net" is renamed to "net" to avoid
confusion with real source netns, and will be deprecated later. The use
of src_net are converted to params->net trivially.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When creating link, lookup for existing device in target net namespace
instead of current one.
For example, two links created by:
# ip link add dummy1 type dummy
# ip link add netns ns1 dummy1 type dummy
should have no conflict since they are in different namespaces.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-2-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Chris Packham says:
====================
dt-bindings: net: realtek,rtl9301-switch (schema part)
This is my attempt at trying to sort out the mess I've created with the RTL9300
switch dt-bindings. Some context is available on [1] and [2].
The first patch just moves the binding from mfd/ to net/ (with an adjustment of
the internal path name). The next two patches are successors to patches already
sent as part of the series [3].
[1] - https://lore.kernel.org/lkml/20250204-eccentric-deer-of-felicity-02b7ee@krzk-bin/
[2] - https://lore.kernel.org/lkml/4e3c5d83-d215-4eff-bf02-6d420592df8f@alliedtelesis.co.nz/
[3] - https://lore.kernel.org/lkml/20250204030249.1965444-1-chris.packham@alliedtelesis.co.nz/
====================
Link: https://patch.msgid.link/20250218195216.1034220-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add dtschema for the MDIO controller found in the RTL9300 Ethernet
switch. The controller is slightly unusual in that direct MDIO
communication is not possible. We model the MDIO controller with the
MDIO buses as child nodes and the PHYs as children of the buses. The
mapping of switch port number to MDIO bus/addr requires the
ethernet-ports sibling to provide the mapping via the phy-handle
property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-4-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bindings for the ethernet-switch and interrupt properties for the
RTL9300.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Initially realtek,rtl9301-switch was placed under mfd/ because it had
some non-switch related blocks (specifically i2c and reset) but with a
bit more review it has become apparent that this was wrong and the
binding should live under net/.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Howells says:
====================
rxrpc, afs: Miscellaneous fixes
Here are some miscellaneous fixes for rxrpc and afs:
(1) In the rxperf test server, make it correctly receive and decode the
terminal magic cookie.
(2) In rxrpc, get rid of the peer->mtu_lock as it is not only redundant,
it now causes a lockdep complaint.
(3) In rxrpc, fix a lockdep-detected instance where a spinlock is being
bh-locked whilst irqs are disabled.
(4) In afs, fix the ref of a server displaced from an afs_server_list
struct.
(5) In afs, make afs_server records belonging to a cell take refs on the
afs_cell record so that the latter doesn't get deleted first when that
cell is being destroyed.
====================
Link: https://patch.msgid.link/20250218192250.296870-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Give an afs_server object a ref on the afs_cell object it points to so that
the cell doesn't get deleted before the server record.
Whilst this is circular (cell -> vol -> server_list -> server -> cell), the
ref only pins the memory, not the lifetime as that's controlled by the
activity counter. When the volume's activity counter reaches 0, it
detaches from the cell and discards its server list; when a cell's activity
counter reaches 0, it discards its root volume. At that point, the
circularity is cut.
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When allocating and building an afs_server_list struct object from a VLDB
record, we look up each server address to get the server record for it -
but a server may have more than one entry in the record and we discard the
duplicate pointers. Currently, however, when we discard, we only put a
server record, not unuse it - but the lookup got as an active-user count.
The active-user count on an afs_server_list object determines its lifetime
whereas the refcount keeps the memory backing it around. Failing to reduce
the active-user counter prevents the record from being cleaned up and can
lead to multiple copied being seen - and pointing to deleted afs_cell
objects and other such things.
Fix this by switching the incorrect 'put' to an 'unuse' instead.
Without this, occasionally, a dead server record can be seen in
/proc/net/afs/servers and list corruption may be observed:
list_del corruption. prev->next should be ffff888102423e40, but was 0000000000000000. (prev=ffff88810140cd38)
Fixes: 977e5f8ed0ab ("afs: Split the usage count on struct afs_server")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rxrpc_new_incoming_peer() can't use spin_lock_bh() whilst its caller has
interrupts disabled.
WARNING: CPU: 0 PID: 1550 at kernel/softirq.c:369 __local_bh_enable_ip+0x46/0xd0
...
Call Trace:
rxrpc_alloc_incoming_call+0x1b0/0x400
rxrpc_new_incoming_call+0x1dd/0x5e0
rxrpc_input_packet+0x84a/0x920
rxrpc_io_thread+0x40d/0xb40
kthread+0x2ec/0x300
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 1811
hardirqs last enabled at (1809): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (1810): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (1182): handle_softirqs+0x3ee/0x430
softirqs last disabled at (1811): rxrpc_new_incoming_peer+0x56/0x120
Fix this by using a plain spin_lock() instead. IRQs are held, so softirqs
can't happen.
Fixes: a2ea9a907260 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The peer->mtu_lock is only used to lock around writes to peer->max_data -
and nothing else; further, all such writes take place in the I/O thread and
the lock is only ever write-locked and never read-locked.
In a couple of places, the write_seqcount_begin() is wrapped in
preempt_disable/enable(), but not in all places. This can cause lockdep to
complain:
WARNING: CPU: 0 PID: 1549 at include/linux/seqlock.h:221 rxrpc_input_ack_trailer+0x305/0x430
...
RIP: 0010:rxrpc_input_ack_trailer+0x305/0x430
Fix this by just getting rid of the lock.
Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rxperf RPCs seem to have a magic cookie at the end of the request that
was failing to be taken account of by the unmarshalling of the request.
Fix the rxperf code to expect this.
Fixes: 75bfdbf2fca3 ("rxrpc: Implement an in-kernel rxperf server for testing purposes")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The OEM SFP-2.5G-BX10-D/U SFP module pair is meant to operate with
2500Base-X. However, in their EEPROM they incorrectly specify:
Transceiver codes : 0x00 0x12 0x00 0x00 0x12 0x00 0x01 0x05 0x00
BR, Nominal : 2500MBd
Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
Tested on BananaPi R3.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20250218-b4-lkmsub-v1-1-1e51dcabed90@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, lots of small things all over, msm has
a bunch of things but all very small, xe, i915, a fix for the cgroup
dmem controller.
core:
- remove MAINTAINERS entry
cgroup/dmem:
- use correct function for pool descendants
panel:
- fix signal polarity issue jd9365da-h3
nouveau:
- folio handling fix
- config fix
amdxdna:
- fix missing header
xe:
- Fix error handling in xe_irq_install
- Fix devcoredump format
i915:
- Use spin_lock_irqsave() in interruptible context on guc submission
- Fixes on DDI and TRANS programming
- Make sure all planes in use by the joiner have their crtc included
- Fix 128b/132b modeset issues
msm:
- More catalog fixes:
- to skip watchdog programming through top block if its not
present
- fix the setting of WB mask to ensure the WB input control is
programmed correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any
3dmerge block
- Fix the mode validation logic for DP/eDP to account for widebus
(2ppc) to allow high clock resolutions
- Fix to disable dither during encoder disable as otherwise this
was causing kms_writeback failure due to resource sharing
between WB and DSI paths as DSI uses dither but WB does not
- Fixes for virtual planes, namely to drop extraneous return and
fix uninitialized variables
- Fix to avoid spill-over of DSC encoder block bits when
programming the bits-per-component
- Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
- Core/GPU:
- Fix non-blocking fence wait incorrectly rounding up to 1 jiffy
timeout
- Only print GMU fw version once, instead of each time the GPU
resumes"
* tag 'drm-fixes-2025-02-22' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/i915/dp: Fix disabling the transcoder function in 128b/132b mode
drm/i915/dp: Fix error handling during 128b/132b link training
accel/amdxdna: Add missing include linux/slab.h
MAINTAINERS: Remove myself
drm/nouveau/pmu: Fix gp10b firmware guard
cgroup/dmem: Don't open-code css_for_each_descendant_pre
drm/xe/guc: Fix size_t print format
drm/xe: Make GUC binaries dump consistent with other binaries in devcoredump
drm/i915: Make sure all planes in use by the joiner have their crtc included
drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL
drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro
drm/xe: Fix error handling in xe_irq_install()
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
drm/msm/dsi/phy: Do not overwite PHY_CMN_CLK_CFG1 when choosing bitclk source
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG1 against clock driver
drm/msm/dsi/phy: Protect PHY_CMN_CLK_CFG0 updated from driver side
drm/msm/dpu: Drop extraneous return in dpu_crtc_reassign_planes()
drm/msm/dpu: Don't leak bits_per_component into random DSC_ENC fields
drm/msm/dpu: Disable dither in phys encoder cleanup
drm/msm/dpu: Fix uninitialized variable
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
- MD pull request via Yu:
- Fix queue limits error handling for raid0, raid1 and raid10
- Fix for a NULL pointer deref in request data mapping
- Code cleanup for request merging
* tag 'block-6.14-20250221' of git://git.kernel.dk/linux:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
block: fix NULL pointer dereferenced within __blk_rq_map_sg
block/merge: remove unnecessary min() with UINT_MAX
md/raid*: Fix the set_queue_limits implementations
|
|
Pull io_uring fixes from Jens Axboe:
- Series fixing an issue with multishot read on pollable files that may
return -EIOCBQUEUED from ->read_iter(). Four small patches for that,
the first one deliberately done in such a way that it'd be easy to
backport
- Remove some dead constant definitions
- Use array_index_nospec() for opcode indexing
- Work-around for worker creation retries in the presence of signals
* tag 'io_uring-6.14-20250221' of git://git.kernel.dk/linux:
io_uring/rw: clean up mshot forced sync mode
io_uring/rw: move ki_complete init into prep
io_uring/rw: don't directly use ki_complete
io_uring/rw: forbid multishot async reads
io_uring/rsrc: remove unused constants
io_uring: fix spelling error in uapi io_uring.h
io_uring: prevent opcode speculation
io-wq: backoff when retrying worker creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a memory leak in the ACPI platform_profile driver (Kurt Borja)"
* tag 'acpi-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: platform_profile: Fix memory leak in profile_class_is_visible()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"The two most important fixes in this list are probably the SST write
failure and the Qcom raw NAND controller probe failure which are due
to some refactoring, otherwise there has been a series of misc fixes
on the Cadence raw NAND controller driver and especially on the DMA
side"
* tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: cadence: fix unchecked dereference
mtd: spi-nor: sst: Fix SST write failure
dt-bindings: mtd: cadence: document required clock-names
mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec
mtd: rawnand: cadence: fix incorrect device in dma_unmap_single
mtd: rawnand: cadence: use dma_map_resource for sdma address
mtd: rawnand: cadence: fix error code in cadence_nand_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"There are two fixes for GPIO core: one adds missing retval checks to
older code, while the second adds SRCU synchronization to legs in code
that were missed during the big rework a few cycles back. There's also
one small driver fix:
- check the return value of the get_direction() callback in struct
gpio_chip
- protect the multi-line get/set legs in GPIO core with SRCU
- fix a race condition in gpio-vf610"
* tag 'gpio-fixes-for-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: don't bail out if get_direction() fails in gpiochip_add_data()
gpiolib: protect gpio_chip with SRCU in array_info paths in multi get/set
gpio: vf610: add locking to gpio direction functions
gpiolib: check the return value of gpio_chip::get_direction()
|
|
kmemleak reports the following memory leak after reading set_event file:
# cat /sys/kernel/tracing/set_event
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff110001234449e0 (size 16):
comm "cat", pid 13645, jiffies 4294981880
hex dump (first 16 bytes):
01 00 00 00 00 00 00 00 a8 71 e7 84 ff ff ff ff .........q......
backtrace (crc c43abbc):
__kmalloc_cache_noprof+0x3ca/0x4b0
s_start+0x72/0x2d0
seq_read_iter+0x265/0x1080
seq_read+0x2c9/0x420
vfs_read+0x166/0xc30
ksys_read+0xf4/0x1d0
do_syscall_64+0x79/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The issue can be reproduced regardless of whether set_event is empty or
not. Here is an example about the valid content of set_event.
# cat /sys/kernel/tracing/set_event
sched:sched_process_fork
sched:sched_switch
sched:sched_wakeup
*:*:mod:trace_events_sample
The root cause is that s_next() returns NULL when nothing is found.
This results in s_stop() attempting to free a NULL pointer because its
parameter is NULL.
Fix the issue by freeing the memory appropriately when s_next() fails
to find anything.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250220031528.7373-1-ahuang12@lenovo.com
Fixes: b355247df104 ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function tracer should record the preemption level at the point when
the function is invoked. If the tracing subsystem decrement the
preemption counter it needs to correct this before feeding the data into
the trace buffer. This was broken in the commit cited below while
shifting the preempt-disabled section.
Use tracing_gen_ctx_dec() which properly subtracts one from the
preemption counter on a preemptible kernel.
Cc: stable@vger.kernel.org
Cc: Wander Lairson Costa <wander@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20250220140749.pfw8qoNZ@linutronix.de
Fixes: ce5e48036c9e7 ("ftrace: disable preemption when recursion locked")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
A few bugs were found in the fprobe accounting logic along with it using
the function graph infrastructure. Update the fprobe selftest to catch
those bugs in case they or something similar shows up in the future.
The test now checks the enabled_functions file which shows all the
functions attached to ftrace or fgraph. When enabling a fprobe, make sure
that its corresponding function is also added to that file. Also add two
more fprobes to enable to make sure that the fprobe logic works properly
with multiple probes.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.733001756@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When adding a new fprobe, it will update the function hash to the
functions the fprobe is attached to and register with function graph to
have it call the registered functions. The fprobe_graph_active variable
keeps track of the number of fprobes that are using function graph.
If two fprobes attach to the same function, it increments the
fprobe_graph_active for each of them. But when they are removed, the first
fprobe to be removed will see that the function it is attached to is also
used by another fprobe and it will not remove that function from
function_graph. The logic will skip decrementing the fprobe_graph_active
variable.
This causes the fprobe_graph_active variable to not go to zero when all
fprobes are removed, and in doing so it does not unregister from
function graph. As the fgraph ops hash will now be empty, and an empty
filter hash means all functions are enabled, this triggers function graph
to add a callback to the fprobe infrastructure for every function!
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# echo "f:myevent2 kernel_clone%return" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0024000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# > /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
try_to_run_init_process (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
cleanup_rapl_pmus (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_free_pcibus_map (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_types_exit (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
kvm_shutdown (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
vmx_dump_msrs (1) tramp: 0xffffffffc0026000 (function_trace_call+0x0/0x170) ->function_trace_call+0x0/0x170
[..]
# cat /sys/kernel/tracing/enabled_functions | wc -l
54702
If a fprobe is being removed and all its functions are also traced by
other fprobes, still decrement the fprobe_graph_active counter.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.565129766@goodmis.org
Fixes: 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
Closes: https://lore.kernel.org/all/20250217114918.10397-A-hca@linux.ibm.com/
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the last fprobe is removed, it calls unregister_ftrace_graph() to
remove the graph_ops from function graph. The issue is when it does so, it
calls return before removing the function from its graph ops via
ftrace_set_filter_ips(). This leaves the last function lingering in the
fprobe's fgraph ops and if a probe is added it also enables that last
function (even though the callback will just drop it, it does add unneeded
overhead to make that call).
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
schedule_timeout (1) tramp: 0xffffffffc02f3000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# > /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
# echo "f:myevent3 kmem_cache_free" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kmem_cache_free (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
schedule_timeout (1) tramp: 0xffffffffc0219000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
The above enabled a fprobe on kernel_clone, and then on schedule_timeout.
The content of the enabled_functions shows the functions that have a
callback attached to them. The fprobe attached to those functions
properly. Then the fprobes were cleared, and enabled_functions was empty
after that. But after adding a fprobe on kmem_cache_free, the
enabled_functions shows that the schedule_timeout was attached again. This
is because it was still left in the fprobe ops that is used to tell
function graph what functions it wants callbacks from.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.393254452@goodmis.org
Fixes: 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Check if a function is already in the manager ops of a subops. A manager
ops contains multiple subops, and if two or more subops are tracing the
same function, the manager ops only needs a single entry in its hash.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.226762894@goodmis.org
Fixes: 4f554e955614f ("ftrace: Add ftrace_set_filter_ips function")
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Function graph uses a subops and manager ops mechanism to attach to
ftrace. The manager ops connects to ftrace and the functions it connects
to is defined by a list of subops that it manages.
The function hash that defines what the above ops attaches to limits the
functions to attach if the hash has any content. If the hash is empty, it
means to trace all functions.
The creation of the manager ops hash is done by iterating over all the
subops hashes. If any of the subops hashes is empty, it means that the
manager ops hash must trace all functions as well.
The issue is in the creation of the manager ops. When a second subops is
attached, a new hash is created by starting it as NULL and adding the
subops one at a time. But the NULL ops is mistaken as an empty hash, and
once an empty hash is found, it stops the loop of subops and just enables
all functions.
# echo "f:myevent1 kernel_clone" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
kernel_clone (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
# echo "f:myevent2 schedule_timeout" >> /sys/kernel/tracing/dynamic_events
# cat /sys/kernel/tracing/enabled_functions
trace_initcall_start_cb (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
try_to_run_init_process (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
x86_pmu_show_pmu_cap (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
cleanup_rapl_pmus (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_free_pcibus_map (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_types_exit (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
uncore_pci_exit.part.0 (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
kvm_shutdown (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_dump_msrs (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
vmx_cleanup_l1d_flush (1) tramp: 0xffffffffc0309000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60
[..]
Fix this by initializing the new hash to NULL and if the hash is NULL do
not treat it as an empty hash but instead allocate by copying the content
of the first sub ops. Then on subsequent iterations, the new hash will not
be NULL, but the content of the previous subops. If that first subops
attached to all functions, then new hash may assume that the manager ops
also needs to attach to all functions.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.060300046@goodmis.org
Fixes: 5fccc7552ccbc ("ftrace: Add subops logic to allow one ops to manage many")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.14
A few fixes I and James Calligero picked out of the Asahi tree.
|
|
- Correct "in order" to "in order to"
- Append missing quantifier
Signed-off-by: Brian Ochoa <brianeochoa@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250219150920.445802-1-brianeochoa@gmail.com
|
|
With CONFIG_DEBUG_RSEQ=y, at rseq registration the read-only fields are
copied from user-space, if this copy fails the syscall returns -EFAULT
and the registration should not be activated - but it erroneously is.
Move the activation of the registration after the copy of the fields to
fix this bug.
Fixes: 7d5265ffcd8b ("rseq: Validate read-only fields under DEBUG_RSEQ config")
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250219205330.324770-1-mjeanson@efficios.com
|
|
The 'noxsave' boot option disables support for AVX, but support for the
AVX-VNNI feature was still declared on CPUs that support it. Fix this.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250220060124.89622-1-ebiggers@kernel.org
|
|
Two fixes for uncached IO.
* patches from https://lore.kernel.org/r/20250218120209.88093-1-jefflexu@linux.alibaba.com:
mm/truncate: don't skip dirty page in folio_unmap_invalidate()
mm/filemap: fix miscalculated file range for filemap_fdatawrite_range_kick()
Link: https://lore.kernel.org/r/20250218120209.88093-1-jefflexu@linux.alibaba.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
... otherwise this is a behavior change for the previous callers of
invalidate_complete_folio2(), e.g. the page invalidation routine.
Fixes: 4a9e23159fd3 ("mm/truncate: add folio_unmap_invalidate() helper")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250218120209.88093-3-jefflexu@linux.alibaba.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
iocb->ki_pos has been updated with the number of written bytes since
generic_perform_write().
Besides __filemap_fdatawrite_range() accepts the inclusive end of the
data range.
Fixes: 1d4457576570 ("mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250218120209.88093-2-jefflexu@linux.alibaba.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On X1E80100, there is a hardware bug in the register logic of the
IRQ_ENABLE_BANK register: While read accesses work on the normal address,
all write accesses must be made to a shifted address. Without a workaround
for this, the wrong interrupt gets enabled in the PDC and it is impossible
to wakeup from deep suspend (CX collapse). This has not caused problems so
far, because the deep suspend state was not enabled. A workaround is
required now since work is ongoing to fix this.
The PDC has multiple "DRV" regions, each one has a size of 0x10000 and
provides the same set of registers for a particular client in the system.
Linux is one the clients and uses DRV region 2 on X1E. Each "bank" inside
the DRV region consists of 32 interrupt pins that can be enabled using the
IRQ_ENABLE_BANK register:
IRQ_ENABLE_BANK[bank] = base + IRQ_ENABLE_BANK + bank * sizeof(u32)
On X1E, this works as intended for read access. However, write access to
most banks is shifted by 2:
IRQ_ENABLE_BANK_X1E[0] = IRQ_ENABLE_BANK[-2]
IRQ_ENABLE_BANK_X1E[1] = IRQ_ENABLE_BANK[-1]
IRQ_ENABLE_BANK_X1E[2] = IRQ_ENABLE_BANK[0] = IRQ_ENABLE_BANK[2 - 2]
IRQ_ENABLE_BANK_X1E[3] = IRQ_ENABLE_BANK[1] = IRQ_ENABLE_BANK[3 - 2]
IRQ_ENABLE_BANK_X1E[4] = IRQ_ENABLE_BANK[2] = IRQ_ENABLE_BANK[4 - 2]
IRQ_ENABLE_BANK_X1E[5] = IRQ_ENABLE_BANK[5] (this one works as intended)
The negative indexes underflow to banks of the previous DRV/client region:
IRQ_ENABLE_BANK_X1E[drv 2][bank 0] = IRQ_ENABLE_BANK[drv 2][bank -2]
= IRQ_ENABLE_BANK[drv 1][bank 5-2]
= IRQ_ENABLE_BANK[drv 1][bank 3]
= IRQ_ENABLE_BANK[drv 1][bank 0 + 3]
IRQ_ENABLE_BANK_X1E[drv 2][bank 1] = IRQ_ENABLE_BANK[drv 2][bank -1]
= IRQ_ENABLE_BANK[drv 1][bank 5-1]
= IRQ_ENABLE_BANK[drv 1][bank 4]
= IRQ_ENABLE_BANK[drv 1][bank 1 + 3]
Introduce a workaround for the bug by matching the qcom,x1e80100-pdc
compatible and apply the offsets as shown above:
- Bank 0...1: previous DRV region, bank += 3
- Bank 1...4: our DRV region, bank -= 2
- Bank 5: our DRV region, no fixup required
The PDC node in the device tree only describes the DRV region for the Linux
client, but the workaround also requires to map parts of the previous DRV
region to issue writes there. To maintain compatibility with old device
trees, obtain the base address of the preceeding region by applying the
-0x10000 offset. Note that this is also more correct from a conceptual
point of view:
It does not really make use of the other region; it just issues shifted
writes that end up in the registers of the Linux associated DRV region 2.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/all/20250218-x1e80100-pdc-hw-wa-v2-1-29be4c98e355@linaro.org
|
|
size
[BUG]
When running generic/418 with a btrfs whose block size < page size
(subpage cases), it always fails.
And the following minimal reproducer is more than enough to trigger it
reliably:
workload()
{
mkfs.btrfs -s 4k -f $dev > /dev/null
dmesg -C
mount $dev $mnt
$fsstree_dir/src/dio-invalidate-cache -r -b 4096 -n 3 -i 1 -f $mnt/diotest
ret=$?
umount $mnt
stop_trace
if [ $ret -ne 0 ]; then
fail
fi
}
for (( i = 0; i < 1024; i++)); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
With extra trace printk added to the following functions:
- btrfs_buffered_write()
* Which folio is touched
* The file offset (start) where the buffered write is at
* How many bytes are copied
* The content of the write (the first 2 bytes)
- submit_one_sector()
* Which folio is touched
* The position inside the folio
* The content of the page cache (the first 2 bytes)
- pagecache_isize_extended()
* The parameters of the function itself
* The parameters of the folio_zero_range()
Which are enough to show the problem:
22.158114: btrfs_buffered_write: folio pos=0 start=0 copied=4096 content=0x0101
22.158161: submit_one_sector: r/i=5/257 folio=0 pos=0 content=0x0101
22.158609: btrfs_buffered_write: folio pos=0 start=4096 copied=4096 content=0x0101
22.158634: btrfs_buffered_write: folio pos=0 start=8192 copied=4096 content=0x0101
22.158650: pagecache_isize_extended: folio=0 from=4096 to=8192 bsize=4096 zero off=4096 len=8192
22.158682: submit_one_sector: r/i=5/257 folio=0 pos=4096 content=0x0000
22.158686: submit_one_sector: r/i=5/257 folio=0 pos=8192 content=0x0101
The tool dio-invalidate-cache will start 3 threads, each doing a buffered
write with 0x01 at offset 0, 4096 and 8192, do a fsync, then do a direct read,
and compare the read buffer with the write buffer.
Note that all 3 btrfs_buffered_write() are writing the correct 0x01 into
the page cache.
But at submit_one_sector(), at file offset 4096, the content is zeroed
out, by pagecache_isize_extended().
The race happens like this:
Thread A is writing into range [4K, 8K).
Thread B is writing into range [8K, 12k).
Thread A | Thread B
-------------------------------------+------------------------------------
btrfs_buffered_write() | btrfs_buffered_write()
|- old_isize = 4K; | |- old_isize = 4096;
|- btrfs_inode_lock() | |
|- write into folio range [4K, 8K) | |
|- pagecache_isize_extended() | |
| extend isize from 4096 to 8192 | |
| no folio_zero_range() called | |
|- btrfs_inode_lock() | |
| |- btrfs_inode_lock()
| |- write into folio range [8K, 12K)
| |- pagecache_isize_extended()
| | calling folio_zero_range(4K, 8K)
| | This is caused by the old_isize is
| | grabbed too early, without any
| | inode lock.
| |- btrfs_inode_unlock()
The @old_isize is grabbed without inode lock, causing race between two
buffered write threads and making pagecache_isize_extended() to zero
range which is still containing cached data.
And this is only affecting subpage btrfs, because for regular blocksize
== page size case, the function pagecache_isize_extended() will do
nothing if the block size >= page size.
[FIX]
Grab the old i_size while holding the inode lock.
This means each buffered write thread will have a stable view of the
old inode size, thus avoid the above race.
CC: stable@vger.kernel.org # 5.15+
Fixes: 5e8b9ef30392 ("btrfs: move pos increment and pagecache extension to btrfs_buffered_write")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
If btrfs failed to locate the seed device for whatever reason, mounting
the sprouted device will fail without any meaning error message:
# mkfs.btrfs -f /dev/test/scratch1
# btrfstune -S1 /dev/test/scratch1
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs dev add -f /dev/test/scratch2 /mnt/btrfs
# umount /mnt/btrfs
# btrfs dev scan -u
# btrfs mount /dev/test/scratch2 /mnt/btrfs
mount: /mnt/btrfs: fsconfig system call failed: No such file or directory.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n6
BTRFS info (device dm-5): first mount of filesystem 64252ded-5953-4868-b962-cea48f7ac4ea
BTRFS info (device dm-5): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-5): using free-space-tree
BTRFS error (device dm-5): failed to read chunk tree: -2
BTRFS error (device dm-5): open_ctree failed: -2
[CAUSE]
The failure to mount is pretty straight forward, just unable to find the
seed device and its fsid, caused by `btrfs dev scan -u`.
But the lack of any useful info is a problem.
[FIX]
Just add an extra error message in open_seed_devices() to indicate the
error.
Now the error message would look like this:
BTRFS info (device dm-4): first mount of filesystem 7769223d-4db1-4e4c-ac29-0a96f53576ab
BTRFS info (device dm-4): using crc32c (crc32c-generic) checksum algorithm
BTRFS info (device dm-4): using free-space-tree
BTRFS error (device dm-4): failed to find fsid e87c12e6-584b-4e98-8b88-962c33a619ff when attempting to open seed devices
BTRFS error (device dm-4): failed to read chunk tree: -2
BTRFS error (device dm-4): open_ctree failed: -2
Link: https://github.com/kdave/btrfs-progs/issues/959
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent map shrinker now runs in the system unbound workqueue and no
longer in kswapd context so it can directly do an iput() on inodes even
if that blocks or needs to acquire any lock (we aren't holding any locks
when requesting the delayed iput from the shrinker). So we don't need to
add a delayed iput, wake up the cleaner and delegate the iput() to the
cleaner, which also adds extra contention on the spinlock that protects
the delayed iputs list.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If there are inodes that don't have any loaded extent maps, we end up
grabbing a reference on them and later adding a delayed iput, which wakes
up the cleaner and makes it do unnecessary work. This is common when for
example the inodes were open only to run stat(2) or all their extent maps
were already released through the folio release callback
(btrfs_release_folio()) or released by a previous run of the shrinker, or
directories which never have extent maps.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.13+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_scan_root() we are accessing the inode's root (and fs_info) in a
call to btrfs_fs_closing() after we have scheduled the inode for a delayed
iput, and that can result in a use-after-free on the inode in case the
cleaner kthread does the iput before we dereference the inode in the call
to btrfs_fs_closing().
Fix this by using the fs_info stored already in a local variable instead
of doing inode->root->fs_info.
Fixes: 102044384056 ("btrfs: make the extent map shrinker run asynchronously as a work queue job")
CC: stable@vger.kernel.org # 6.13+
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/0414d690ac5680d0d77dfc930606cdc36e42e12f.camel@intelfx.name/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the device doesn't support arpmb we'll crash due to copying user data in
bsg_transport_sg_io_fn().
In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not
set the job's reply_len.
Memory crash backtrace:
3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22
4,1308,531166555,-;Call Trace:
4,1309,531166559,-; <TASK>
4,1310,531166565,-; ? show_regs+0x6d/0x80
4,1311,531166575,-; ? die+0x37/0xa0
4,1312,531166583,-; ? do_trap+0xd4/0xf0
4,1313,531166593,-; ? do_error_trap+0x71/0xb0
4,1314,531166601,-; ? usercopy_abort+0x6c/0x80
4,1315,531166610,-; ? exc_invalid_op+0x52/0x80
4,1316,531166622,-; ? usercopy_abort+0x6c/0x80
4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20
4,1318,531166643,-; ? usercopy_abort+0x6c/0x80
4,1319,531166652,-; __check_heap_object+0xe3/0x120
4,1320,531166661,-; check_heap_object+0x185/0x1d0
4,1321,531166670,-; __check_object_size.part.0+0x72/0x150
4,1322,531166679,-; __check_object_size+0x23/0x30
4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0
Fixes: 6ff265fc5ef6 ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Cc: stable@vger.kernel.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Arthur Simchaev <arthur.simchaev@sandisk.com>
Link: https://lore.kernel.org/r/20250220142039.250992-1-arthur.simchaev@sandisk.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit bb9850704c04 ("scsi: ufs: core: Honor runtime/system PM levels if
set by host controller drivers") introduced the check for setting default
PM levels only if the levels are uninitialized by the host controller
drivers. But it missed the fact that the levels could be initialized to 0
(UFS_PM_LVL_0) on purpose by the controller drivers. Even though none of
the drivers are doing so now, the logic should be fixed irrespectively.
So set the default levels unconditionally before calling ufshcd_hba_init()
API which initializes the controller drivers. It ensures that the
controller drivers could override the default levels if required.
Fixes: bb9850704c04 ("scsi: ufs: core: Honor runtime/system PM levels if set by host controller drivers")
Reported-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250219105047.49932-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After commit 1bad6c4a57ef ("scsi: zero per-cmd private driver data for each
MQ I/O"), the xen-scsifront/virtio_scsi/snic drivers all removed code that
explicitly zeroed driver-private command data.
In combination with commit 464a00c9e0ad ("scsi: core: Kill DRIVER_SENSE"),
after virtio_scsi performs a capacity expansion, the first request will
return a unit attention to indicate that the capacity has changed. And then
the original command is retried. As driver-private command data was not
cleared, the request would return UA again and eventually time out and fail.
Zero driver-private command data when a request is retried.
Fixes: f7de50da1479 ("scsi: xen-scsifront: Remove code that zeroes driver-private command data")
Fixes: c2bb87318baa ("scsi: virtio_scsi: Remove code that zeroes driver-private command data")
Fixes: c3006a926468 ("scsi: snic: Remove code that zeroes driver-private command data")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250217021628.2929248-1-yebin@huaweicloud.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After 12d5151be010 ("net: phy: remove leftovers from switch to linkmode
bitmaps") the following declarations are unused and can be removed too.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/b2883c75-4108-48f2-ab73-e81647262bc2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- core: Fix extension related lockdep warning for LED triggers
- axp20x-battery: Fix fault handling for AXP717
- da9150-fg: fix potential overflow
* tag 'for-v6.14-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: axp20x_battery: Fix fault handling for AXP717
power: supply: core: Fix extension related lockdep warning
power: supply: da9150-fg: fix potential overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix an unintentional masking of AHCI ports when the device tree does
not define port child nodes (Damien)
* tag 'ata-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libahci_platform: Do not set mask_port_map when not needed
|
|
Jakub Kicinski says:
====================
selftests: drv-net: improve the queue test for XSK
We see some flakes in the the XSK test:
Exception| Traceback (most recent call last):
Exception| File "/home/virtme/testing-18/tools/testing/selftests/net/lib/py/ksft.py", line 218, in ksft_run
Exception| case(*args)
Exception| File "/home/virtme/testing-18/tools/testing/selftests/drivers/net/./queues.py", line 53, in check_xdp
Exception| ksft_eq(q['xsk'], {})
Exception| KeyError: 'xsk'
I think it's because the method of running the helper in the background
is racy. Add more solid infra for waiting for a background helper to be
initialized.
v1: https://lore.kernel.org/20250218195048.74692-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250219234956.520599-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test is for AF_XDP, we refer to AF_XDP as XSK.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoid exceptions when xsk attr is not present, and add a proper ksft
helper for "not in" condition.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We use wait_port_listen() extensively to wait for a process
we spawned to be ready. Not all processes will open listening
sockets. Add a method of explicitly waiting for a child to
be ready. Pass a FD to the spawned process and wait for it
to write a message to us. FD number is passed via KSFT_READY_FD
env variable.
Similarly use KSFT_WAIT_FD to let the child process for a sign
that we are done and child should exit. Sending a signal to
a child with shell=True can get tricky.
Make use of this method in the queues test to make it less flaky.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
