summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-26rtl8xxxu: Rename rtl8723a_mac_init_table to rtl8xxxu_gen1_mac_init_tableJes Sorensen
All currently supported gen1 parts use the same mac_init_table, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_enable_rf() to rtl8xxxu_gen1_enable_rf()Jes Sorensen
All gen1 parts use the same enable_rf() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_set_tx_power() to rtl8xxxu_gen1_set_tx_power()Jes Sorensen
All gen1 parts use the same interface for setting TX power, so rename the function to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_init_phy_bb() to rtl8xxxu_gen1_init_phy_bb()Jes Sorensen
All gen1 parts use the same init_phy_bb() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_phy_iq_calibrate() to ↵Jes Sorensen
rtl8xxxu_gen1_phy_iq_calibrate() All supported gen1 parts use the same phy_iq_calibrate() function (unlike their gen2 counterparts). Rename the function to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_update_rate_mask() to rtl8xxxu_update_rate_mask()Jes Sorensen
All currently supported gen1 parts use the same function for updating the rate mask, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_config_channel() to rtl8xxxu_gen1_config_channel()Jes Sorensen
All supported gen1 parts use the same config_channel() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_disable_rf() to rtl8xxxu_gen1_disable_rf()Jes Sorensen
All currently supported gen1 parts use the same disable_rf() routine, so rename the function to reflect that. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723b_disable_rf() to rtl8xxxu_gen2_disable_rf()Jes Sorensen
At least for now, all gen2 parts use the same disable_rf() function Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_config_channel() to rtl8xxxu_gen2_config_channel()Jes Sorensen
Rename the function to indicate it is applicable to most/all gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_report_connect() to rtl8xxxu_gen1_report_connect()Jes Sorensen
Rename the function to reflect it is for all/most gen1 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_report_connect() to rtl8xxxu_gen2_report_connect()Jes Sorensen
Make the name reflect this is for most/all gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_update_rate_mask() to ↵Jes Sorensen
rtl8xxxu_gen2_update_rate_mask() Update the name of rtl8723bu_update_rate_mask() to make it reflect it's applicable for all/most gen2 N parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: stop background scan when net device closedXinming Hu
Transmit data path should not touch background scan. We will stop background scan when net device is closed. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: add platform specific wakeup interrupt supportXinming Hu
On some arm-based platforms, we need to configure platform specific parameters by device tree node and also define our node as a child node of parent SDIO host controller. This patch parses these parameters from device tree. It includes calibration data dowoload to firmware, wakeup pin configured to firmware, and soc specific wake up gpio, which will be set as wakeup interrupt pin. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26dt: bindings: add MARVELL's sd8xxx wireless deviceXinming Hu
Add device tree binding documentation for MARVELL's sd8xxx (sd8897 and sd8997) wlan chip. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26brcmf: Fix null pointer exception in bcdc_hdrpullPer Forlin
In fwsignal.c: brcmf_fws_commit_skb() ... if (rc < 0) { entry->transit_count--; if (entry->suppressed) entry->suppr_transit_count--; (void)brcmf_proto_hdrpull(fws->drvr, false, skb, NULL); ^^^^^^^ goto rollback; } ... The call to hdrpull will trigger a null pointer exception unless a null check is made in the method implementation. Signed-off-by: Per Forlin <per.forlin@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26brcmfmac: add support for nl80211 BSS_SELECT featureArend van Spriel
Announce support for nl80211 feature BSS_SELECT and process BSS selection behaviour provided in .connect() callback. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Lei Zhang <leizh@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtlwifi: rtl8821ae: Make sure loop counter is signed on all architecturesDavid Müller
The for-loop condition does not work correctly on architectures where "char" is unsigned. Fix it by using an "int", which may also result in more efficient code. Signed-off-by: David Müller <d.mueller@elsoft.ch> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26prism54: isl_38xx: Replace 'struct timeval'Tina Ruchandani
'struct timeval' uses a 32-bit seconds field which will overflow in year 2038 and beyond. This patch is part of a larger effort to remove all instances of 'struct timeval' from the kernel and replace them with 64-bit timekeeping variables. The patch also fixes the debug printf specifier to avoid the seconds value being truncated. The patch was build-tested / debugged by removing the "if VERBOSE > SHOW_ERROR_MESSAGES" guards. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl818x_pci: Fix a memory leak in rtl8180_init_rx_ringJia-Ju Bai
When dev_alloc_skb or pci_dma_mapping_error in rtl8180_init_rx_ring fails, the memory allocated by pci_zalloc_consistent is not freed. This patch fixes the bug by adding pci_free_consistent in error handling code. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-21rtl8xxxu: hide unused tablesArnd Bergmann
The references to some arrays in the rtl8xxxu driver were moved inside of an #ifdef, but the symbols remain outside, resulting in build warnings: rtl8xxxu/rtl8xxxu.c:1506:33: error: 'rtl8188ru_radioa_1t_highpa_table' defined but not used rtl8xxxu/rtl8xxxu.c:1431:33: error: 'rtl8192cu_radioa_1t_init_table' defined but not used rtl8xxxu/rtl8xxxu.c:1407:33: error: 'rtl8192cu_radiob_2t_init_table' defined but not used rtl8xxxu/rtl8xxxu.c:1332:33: error: 'rtl8192cu_radioa_2t_init_table' defined but not used rtl8xxxu/rtl8xxxu.c:239:35: error: 'rtl8192c_power_base' defined but not used rtl8xxxu/rtl8xxxu.c:217:35: error: 'rtl8188r_power_base' defined but not used This adds an extra #ifdef around them to shut up the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts") Fixes: 4062b8ffec36 ("rtl8xxxu: Move PHY RF init into device specific functions") Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: MAINTAINERS: Update to point to the active devel branchJes Sorensen
Update the MAINTAINERS info to reflect active development of the rtl8xxxu driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Pause TX before calling disable_rf()Jes Sorensen
All the disable_rf() functions were setting REG_TXPAUSE to 0xff to stop transmission. Do it centrally before calling disable_rf() instead. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Implement rtl8192e_enable_rf()Jes Sorensen
This implements an 8192eu specific enable_rf() function. The 8192eu is not a combo device, so no need for doing the BT specific bits needed by the 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Fix OOPS if user tries to add device via /sysJes Sorensen
This driver relies on driver_info in struct usb_device_id, so allowing adding a device via /sys/bus/usb/drivers/rtl8xxxu/new_id will cause a NULL pointer dereference. Set .no_dynamic_id = 1 to disable hot add of USB IDs. Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Fix 8188RU supportJes Sorensen
The 8188RU does not like PAPE to be enabled, while all the other gen1 parts seem to require it. This makes the RTL8188RU able to associate for me. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Add TX power base values for gen1 partsJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Set register 0xfe10 on rtl8192cu based partsJes Sorensen
This register is undocumented in the vendor code, but it is set unconditionally for all 8192cu/8188cu/8188ru parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Update copyright statement to include 2016Jes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Unregister from mac80211 before shutting down the deviceJes Sorensen
This fixes a long standing bug where mac80211 would send disconnect packets to the device, after we had shut down the device. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Match 8723bu power down sequence to vendor driverJes Sorensen
In particular set APS_FSMCO_WLON_RESET in the right register, and do not overwrite too much of REG_CR. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Use rtl_chip == RTL8188R to identify high PA partsJes Sorensen
This is simpler than checking for RTL8188C && hi_pa. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Apply 8188RU workaround for UMC B cut parts correctlyJes Sorensen
This patch was being missed since rtl_chip will never match RTL8188C if hi_pa is true. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: For devices with external PA (8188RU), limit CCK TX powerJes Sorensen
Per the vendor driver, devices with an external PA needs limiting it's TX power to 0x20. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Move PHY RF init into device specific functionsJes Sorensen
Load the RF table in init_phy_rf(), which allows for applying device specific RF hacks in the same place. Getting rid of more ugly if () clutter. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: fix uninitialized return value in retColin Ian King
several functions are not initializing a return status in ret resulting in garbage to be returned instead of 0 for success. Currently, the calls to these functions are not checking the return, however, it seems prudent to return the correct status in case they are to be checked at a later date. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Mark 0x050d:0x1004 as testedJes Sorensen
This dongle was tested successfully by Andrea Merello Reported-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15Re-enable 8192eu supportJes Sorensen
Revert "rtl8xxxu: Temporarily disable 8192eu device init" This reverts commit ccfe1e85322090649d2fae599e55300c1512bf15. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: 8192eu Fix bug in LDPC RX hang fixJes Sorensen
Write the adjusted value back to the correct register Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Remove unneeded 8192eu hackJes Sorensen
This removes an unneeded hack for 8192eu, and allows for initializing REG_FPGA0_XAB_RF_SW_CTRL at the same point as it is done for all other parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Split USB quirks into gen1 and gen2 quirksJes Sorensen
This removes a bunch of if () spaghetti and re-applies the USB bus quirks for 8188/8192 that had gotten lost. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Make PBP tuning a fileops parameterJes Sorensen
Rather than scattering the code with #ifdefs, use the fileops structure to hold device specific PBP values. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Do not backup RF_MODE_AG when it's never being usedJes Sorensen
This was expired by the vendor driver, but we never ended up using the backed up value. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Store device specific TRXFF boundary in the fileopsJes Sorensen
This removes another case of ugly if () clutter Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: REG_LDOA15_CTRL is only used on gen1 partsJes Sorensen
Move setting it to rtl8723au_init_phy_bb() Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Move loading of AGC table to device specific functionJes Sorensen
This moves the loading of the AGC table into init_phy_bb() and reduces the if() clutter. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Load AGC table before patching for 1T2R partsJes Sorensen
This should get the order right and avoid patching something that is later overwritten. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Split rtl8xxxu_init_phy_bb() into device specific functionsJes Sorensen
This reduces the if () clutter. Longer term it probably makes sense to split this between gen1 (8723au/8188cu/8192cu) and gen2 (8192eu/8723bu) devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-15rtl8xxxu: Use descriptive bits for setting RX paths for 1T2R partsJes Sorensen
This reduce the use of magic values a little. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 09:15:18 +0000