| Age | Commit message (Collapse) | Author |
|---|
|
Align with FW changes.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
DCN351 and DCN35 should use the same bounding box and IP settings.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
NumFclkLevelsEnabled is used for DcfClocks bounds check
instead of designated NumDcfClkLevelsEnabled.
That can cause array index out-of-bounds access.
[How]
Use designated variable for dcn35 DcfClocks bounds check.
Fixes: a8edc9cc0b14 ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why&how]
In some platform out_transfer_func may not be popualted. We need to check
for null before dereferencing it.
Fixes: d2dea1f14038 ("drm/amd/display: Generalize new minimal transition path")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Fixes: 27750e176a4f ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).
Fixes: a9b1a4f684b3 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the system hasn't entered GFXOFF when suspend starts it can cause
hangs accessing GC and RLC during the suspend stage.
Cc: <stable@vger.kernel.org> # 6.1.y: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback")
Cc: <stable@vger.kernel.org> # 6.1.y: cb11ca3233aa ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks")
Cc: <stable@vger.kernel.org> # 6.1.y: 2ceec37b0e3d ("drm/amd: Add missing kernel doc for prepare_suspend()")
Cc: <stable@vger.kernel.org> # 6.1.y: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Cc: <stable@vger.kernel.org> # 6.6.y: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback")
Cc: <stable@vger.kernel.org> # 6.6.y: cb11ca3233aa ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks")
Cc: <stable@vger.kernel.org> # 6.6.y: 2ceec37b0e3d ("drm/amd: Add missing kernel doc for prepare_suspend()")
Cc: <stable@vger.kernel.org> # 6.6.y: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend")
Cc: <stable@vger.kernel.org> # 6.1+
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132
Fixes: ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
displays without PSR"
This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.
We'll need to revisit this.
This reverts commit 202260f64519e591b5cd99626e441b6559f571a3.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
TLB flush after unmap accidentially was removed on
gfx9.4.2. It is to add it back.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
To fix mode2 reset failure.
Should power on VPE when hw_init.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why and how]
Bounding box clocks for DCN351 should be increased as per request
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increase Z8 watermark times from 210->250us and 320->350us.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check cgroup permissions when returning DMA-buf info and
based on cgroup info return the GPU id of the GPU that have
access to the BO.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add new vcn and jpeg msg
v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The longest running netdevsim test, nexthop.sh, currently takes
5 min to finish. Around 260s to be exact, and 310s on a debug kernel.
The default timeout in selftest is 45sec, so we need an explicit
config. Give ourselves some headroom and use 10min.
Commit under Fixes isn't really to "blame" but prior to that
netdevsim tests weren't integrated with kselftest infra
so blaming the tests themselves doesn't seem right, either.
Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Compilation with CONFIG_GENERIC_FRAMER disabled lead to the following
warnings:
framer.h:184:16: warning: no previous prototype for function 'framer_get' [-Wmissing-prototypes]
184 | struct framer *framer_get(struct device *dev, const char *con_id)
framer.h:184:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
184 | struct framer *framer_get(struct device *dev, const char *con_id)
framer.h:189:6: warning: no previous prototype for function 'framer_put' [-Wmissing-prototypes]
189 | void framer_put(struct device *dev, struct framer *framer)
framer.h:189:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
189 | void framer_put(struct device *dev, struct framer *framer)
Add missing 'static inline' qualifiers for these functions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403241110.hfJqeJRu-lkp@intel.com/
Fixes: 82c944d05b1a ("net: wan: Add framer framework support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The debug message "Playback action not supported: action" is not useful,
because the action was previously printed, and the list of supported
actions are intentional.
Remove the debug statement from the default switch case.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <8b9546db6c92dea4476a7247a88d56248c2ba8c2.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Sometimes it is useful to examine the timing of kcontrol events.
Add debug statements to each kcontrol.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <18ff4b0caab90a2dacf907e62346fd5079a9eb1a.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The rcabin.profile_cfg_id, cur_prog, cur_conf, force_fwload_status
variables are acccessible from multiple threads and therefore require
locking.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <e35b867f6fe5fa1f869dd658a0a1f2118b737f57.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The "Speaker Digital Gain" kcontrol controls the TAS2781_DVC_LVL (0x1A)
register. Unfortunately the tas2563 does not have DVC_LVL, but has
INT_MASK0 in 0x1A, which has been misused so far.
Since commit c1947ce61ff4 ("ALSA: hda/realtek: tas2781: enable subwoofer
volume control") the volume of the tas2781 amplifiers can be controlled
by the master volume, so this digital gain kcontrol is not needed.
Remove it.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Message-ID: <741fc21db994efd58f83e7aef38931204961e5b2.1711469583.git.soyer@irl.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
clang warns about what it interprets as a truncated snprintf:
sound/aoa/soundbus/i2sbus/core.c:171:6: error: 'snprintf' will always be truncated; specified size is 6, but format string expands to at least 7 [-Werror,-Wformat-truncation-non-kprintf]
The actual problem here is that it does not understand the special
%pOFn format string and assumes that it is a pointer followed by
the string "OFn", which would indeed not fit.
Slightly increasing the size of the buffer to its natural alignment
avoids the warning, as it is now long enough for the correct and
the incorrect interprations.
Fixes: b917d58dcfaa ("ALSA: aoa: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-ID: <20240326223825.4084412-9-arnd@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-25 (ice, ixgbe, igc)
This series contains updates to ice, ixgbe, and igc drivers.
Steven fixes incorrect casting of bitmap type for ice driver.
Jesse fixes memory corruption issue with suspend flow on ice.
Przemek adds GFP_ATOMIC flag to avoid sleeping in IRQ context for ixgbe.
Kurt Kanzenbach removes no longer valid comment on igc.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Remove stale comment about Tx timestamping
ixgbe: avoid sleeping allocation in ixgbe_ipsec_vf_add_sa()
ice: fix memory corruption bug with suspend and rebuild
ice: Refactor FW data type and fix bitmap casting issue
====================
Link: https://lore.kernel.org/r/20240325200659.993749-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mlxbf_gige driver encounters a NULL pointer exception in
mlxbf_gige_open() when kdump is enabled. The sequence to reproduce
the exception is as follows:
a) enable kdump
b) trigger kdump via "echo c > /proc/sysrq-trigger"
c) kdump kernel executes
d) kdump kernel loads mlxbf_gige module
e) the mlxbf_gige module runs its open() as the
the "oob_net0" interface is brought up
f) mlxbf_gige module will experience an exception
during its open(), something like:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000086000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000086000004 [#1] SMP
CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu
Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : 0x0
lr : __napi_poll+0x40/0x230
sp : ffff800008003e00
x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff
x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8
x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000
x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000
x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0
x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398
x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2
x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238
Call trace:
0x0
net_rx_action+0x178/0x360
__do_softirq+0x15c/0x428
__irq_exit_rcu+0xac/0xec
irq_exit+0x18/0x2c
handle_domain_irq+0x6c/0xa0
gic_handle_irq+0xec/0x1b0
call_on_irq_stack+0x20/0x2c
do_interrupt_handler+0x5c/0x70
el1_interrupt+0x30/0x50
el1h_64_irq_handler+0x18/0x2c
el1h_64_irq+0x7c/0x80
__setup_irq+0x4c0/0x950
request_threaded_irq+0xf4/0x1bc
mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige]
mlxbf_gige_open+0x5c/0x170 [mlxbf_gige]
__dev_open+0x100/0x220
__dev_change_flags+0x16c/0x1f0
dev_change_flags+0x2c/0x70
do_setlink+0x220/0xa40
__rtnl_newlink+0x56c/0x8a0
rtnl_newlink+0x58/0x84
rtnetlink_rcv_msg+0x138/0x3c4
netlink_rcv_skb+0x64/0x130
rtnetlink_rcv+0x20/0x30
netlink_unicast+0x2ec/0x360
netlink_sendmsg+0x278/0x490
__sock_sendmsg+0x5c/0x6c
____sys_sendmsg+0x290/0x2d4
___sys_sendmsg+0x84/0xd0
__sys_sendmsg+0x70/0xd0
__arm64_sys_sendmsg+0x2c/0x40
invoke_syscall+0x78/0x100
el0_svc_common.constprop.0+0x54/0x184
do_el0_svc+0x30/0xac
el0_svc+0x48/0x160
el0t_64_sync_handler+0xa4/0x12c
el0t_64_sync+0x1a4/0x1a8
Code: bad PC value
---[ end trace 7d1c3f3bf9d81885 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Kernel Offset: 0x2870a7a00000 from 0xffff800008000000
PHYS_OFFSET: 0x80000000
CPU features: 0x0,000005c1,a3332a5a
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
The exception happens because there is a pending RX interrupt before the
call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires
immediately after this request_irq() completes. The RX IRQ handler runs
"napi_schedule()" before NAPI is fully initialized via "netif_napi_add()"
and "napi_enable()", both which happen later in the open() logic.
The logic in mlxbf_gige_open() must fully initialize NAPI before any calls
to request_irq() execute.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Link: https://lore.kernel.org/r/20240325183627.7641-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sabrina Dubroca says:
====================
tls: recvmsg fixes
The first two fixes are again related to async decrypt. The last one
is unrelated but I stumbled upon it while reading the code.
====================
Link: https://lore.kernel.org/r/cover.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
At the start of tls_sw_recvmsg, we take a reference on the psock, and
then call tls_rx_reader_lock. If that fails, we return directly
without releasing the reference.
Instead of adding a new label, just take the reference after locking
has succeeded, since we don't need it before.
Fixes: 4cbc325ed6b4 ("tls: rx: allow only one reader at a time")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/fe2ade22d030051ce4c3638704ed58b67d0df643.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that we don't return more bytes than we actually received if
the userspace buffer was bogus. We expect to receive at least the rest
of rec1, and possibly some of rec2 (currently, we don't, but that
would be ok).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/720e61b3d3eab40af198a58ce2cd1ee019f0ceb1.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
process_rx_list may not copy as many bytes as we want to the userspace
buffer, for example in case we hit an EFAULT during the copy. If this
happens, we should only count the bytes that were actually copied,
which may be 0.
Subtracting async_copy_bytes is correct in both peek and !peek cases,
because decrypted == async_copy_bytes + peeked for the peek case: peek
is always !ZC, and we can go through either the sync or async path. In
the async case, we add chunk to both decrypted and
async_copy_bytes. In the sync case, we add chunk to both decrypted and
peeked. I missed that in commit 6caaf104423d ("tls: fix peeking with
sync+async decryption").
Fixes: 4d42cd6bc2ac ("tls: rx: fix return value for async crypto")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1b5a1eaab3c088a9dd5d9f1059ceecd7afe888d1.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only MSG_PEEK needs to copy from an offset during the final
process_rx_list call, because the bytes we copied at the beginning of
tls_sw_recvmsg were left on the rx_list. In the KVEC case, we removed
data from the rx_list as we were copying it, so there's no need to use
an offset, just like in the normal case.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/e5487514f828e0347d2b92ca40002c62b58af73d.1711120964.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new helper was introduced for RAS modules to be able to get the RAS
subsystem debugfs root directory. The helper is defined in debugfs.c
which is only built when CONFIG_DEBUG_FS=y.
However, it's possible that the modules would include debugfs support
for optional functionality. One current example is the fmpm module. In
this case, a build error will occur when CONFIG_RAS_FMPM is selected and
CONFIG_DEBUG_FS=n.
Add an inline helper function stub for the CONFIG_DEBUG_FS=n case as the
fmpm module can function without the debugfs functionality too.
Fixes: 9d2b6fa09d15 ("RAS: Export helper to get ras_debugfs_dir")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218640
Reported-by: anthony s. knowles <akira.2020@protonmail.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: anthony s. knowles <akira.2020@protonmail.com>
Link: https://lore.kernel.org/r/20240325183755.776-1-bp@alien8.de
|
|
Add trace points to help debug mknod and mkfifo:
smb3_mknod_done
smb3_mknod_enter
smb3_mknod_err
Example output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
mkfifo-6163 [003] ..... 960.425558: smb3_mknod_enter: xid=12 sid=0xb55130f6 tid=0x46e6241c path=\fifo1
mkfifo-6163 [003] ..... 960.432719: smb3_mknod_done: xid=12 sid=0xb55130f6 tid=0x46e6241c
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are regression reports[1][2] that crashkernel region on x86_64 can't
be added into iomem tree sometime. This causes the later failure of kdump
loading.
This happened after commit 4a693ce65b18 ("kdump: defer the insertion of
crashkernel resources") was merged.
Even though, these reported issues are proved to be related to other
component, they are just exposed after above commmit applied, I still
would like to keep crashk_res and crashk_low_res being added into iomem
early as before because the early adding has been always there on x86_64
and working very well. For safety of kdump, Let's change it back.
Here, add a macro HAVE_ARCH_ADD_CRASH_RES_TO_IOMEM_EARLY to limit that
only ARCH defining the macro can have the early adding
crashk_res/_low_res into iomem. Then define
HAVE_ARCH_ADD_CRASH_RES_TO_IOMEM_EARLY on x86 to enable it.
Note: In reserve_crashkernel_low(), there's a remnant of crashk_low_res
handling which was mistakenly added back in commit 85fcde402db1 ("kexec:
split crashkernel reservation code out from crash_core.c").
[1]
[PATCH V2] x86/kexec: do not update E820 kexec table for setup_data
https://lore.kernel.org/all/Zfv8iCL6CT2JqLIC@darkstar.users.ipa.redhat.com/T/#u
[2]
Question about Address Range Validation in Crash Kernel Allocation
https://lore.kernel.org/all/4eeac1f733584855965a2ea62fa4da58@huawei.com/T/#u
Link: https://lkml.kernel.org/r/ZgDYemRQ2jxjLkq+@MiWiFi-R3L-srv
Fixes: 4a693ce65b18 ("kdump: defer the insertion of crashkernel resources")
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Huacai Chen <chenhuacai@loongson.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Zhongkun He reports data corruption when combining zswap with zram.
The issue is the exclusive loads we're doing in zswap. They assume
that all reads are going into the swapcache, which can assume
authoritative ownership of the data and so the zswap copy can go.
However, zram files are marked SWP_SYNCHRONOUS_IO, and faults will try to
bypass the swapcache. This results in an optimistic read of the swap data
into a page that will be dismissed if the fault fails due to races. In
this case, zswap mustn't drop its authoritative copy.
Link: https://lore.kernel.org/all/CACSyD1N+dUvsu8=zV9P691B9bVq33erwOXNTmEaUbi9DrDeJzw@mail.gmail.com/
Fixes: b9c91c43412f ("mm: zswap: support exclusive loads")
Link: https://lkml.kernel.org/r/20240324210447.956973-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Tested-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Following issue was observed while running the uffd-unit-tests selftest
on ARM devices. On x86_64 no issues were detected:
pthread_create followed by fork caused deadlock in certain cases wherein
fork required some work to be completed by the created thread. Used
synchronization to ensure that created thread's start function has started
before invoking fork.
[edliaw@google.com: refactored to use atomic_bool]
Link: https://lkml.kernel.org/r/20240325194100.775052-1-edliaw@google.com
Fixes: 760aee0b71e3 ("selftests/mm: add tests for RO pinning vs fork()")
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the linked LLVM change, the build fails with
CONFIG_LD_ORPHAN_WARN_LEVEL="error", which happens with allmodconfig:
ld.lld: error: vmlinux.a(init/main.o):(.hexagon.attributes) is being placed in '.hexagon.attributes'
Handle the attributes section in a similar manner as arm and riscv by
adding it after the primary ELF_DETAILS grouping in vmlinux.lds.S, which
fixes the error.
Link: https://lkml.kernel.org/r/20240319-hexagon-handle-attributes-section-vmlinux-lds-s-v1-1-59855dab8872@kernel.org
Fixes: 113616ec5b64 ("hexagon: select ARCH_WANT_LD_ORPHAN_WARN")
Link: https://github.com/llvm/llvm-project/commit/31f4b329c8234fab9afa59494d7f8bdaeaefeaad
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use down_read_nested() to avoid the warning.
Link: https://lkml.kernel.org/r/20240321235818.125118-1-lokeshgidra@google.com
Fixes: 867a43a34ff8 ("userfaultfd: use per-vma locks in userfaultfd operations")
Reported-by: syzbot+49056626fe41e01f2ba7@syzkaller.appspotmail.com
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jann Horn <jannh@google.com> [Bug #2]
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A syzkaller reproducer found a race while attempting to remove dquot
information from the rb tree.
Fetching the rb_tree root node must also be protected by the
dqopt->dqio_sem, otherwise, giving the right timing, shmem_release_dquot()
will trigger a warning because it couldn't find a node in the tree, when
the real reason was the root node changing before the search starts:
Thread 1 Thread 2
- shmem_release_dquot() - shmem_{acquire,release}_dquot()
- fetch ROOT - Fetch ROOT
- acquire dqio_sem
- wait dqio_sem
- do something, triger a tree rebalance
- release dqio_sem
- acquire dqio_sem
- start searching for the node, but
from the wrong location, missing
the node, and triggering a warning.
Link: https://lkml.kernel.org/r/20240320124011.398847-1-cem@kernel.org
Fixes: eafc474e2029 ("shmem: prepare shmem quota infrastructure")
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reported-by: Ubisectech Sirius <bugreport@ubisectech.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sigbus-wp test requires the UFFD_FEATURE_WP_HUGETLBFS_SHMEM flag for
shmem and hugetlb targets. Otherwise it is not backwards compatible with
kernels <5.19 and fails with EINVAL.
Link: https://lkml.kernel.org/r/20240321232023.2064975-1-edliaw@google.com
Fixes: 73c1ea939b65 ("selftests/mm: move uffd sig/events tests into uffd unit tests")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kent forwards this bug report of zswap re-entering the block layer
from an IO request allocation and locking up:
[10264.128242] sysrq: Show Blocked State
[10264.128268] task:kworker/20:0H state:D stack:0 pid:143 tgid:143 ppid:2 flags:0x00004000
[10264.128271] Workqueue: bcachefs_io btree_write_submit [bcachefs]
[10264.128295] Call Trace:
[10264.128295] <TASK>
[10264.128297] __schedule+0x3e6/0x1520
[10264.128303] schedule+0x32/0xd0
[10264.128304] schedule_timeout+0x98/0x160
[10264.128308] io_schedule_timeout+0x50/0x80
[10264.128309] wait_for_completion_io_timeout+0x7f/0x180
[10264.128310] submit_bio_wait+0x78/0xb0
[10264.128313] swap_writepage_bdev_sync+0xf6/0x150
[10264.128317] zswap_writeback_entry+0xf2/0x180
[10264.128319] shrink_memcg_cb+0xe7/0x2f0
[10264.128322] __list_lru_walk_one+0xb9/0x1d0
[10264.128325] list_lru_walk_one+0x5d/0x90
[10264.128326] zswap_shrinker_scan+0xc4/0x130
[10264.128327] do_shrink_slab+0x13f/0x360
[10264.128328] shrink_slab+0x28e/0x3c0
[10264.128329] shrink_one+0x123/0x1b0
[10264.128331] shrink_node+0x97e/0xbc0
[10264.128332] do_try_to_free_pages+0xe7/0x5b0
[10264.128333] try_to_free_pages+0xe1/0x200
[10264.128334] __alloc_pages_slowpath.constprop.0+0x343/0xde0
[10264.128337] __alloc_pages+0x32d/0x350
[10264.128338] allocate_slab+0x400/0x460
[10264.128339] ___slab_alloc+0x40d/0xa40
[10264.128345] kmem_cache_alloc+0x2e7/0x330
[10264.128348] mempool_alloc+0x86/0x1b0
[10264.128349] bio_alloc_bioset+0x200/0x4f0
[10264.128352] bio_alloc_clone+0x23/0x60
[10264.128354] alloc_io+0x26/0xf0 [dm_mod 7e9e6b44df4927f93fb3e4b5c782767396f58382]
[10264.128361] dm_submit_bio+0xb8/0x580 [dm_mod 7e9e6b44df4927f93fb3e4b5c782767396f58382]
[10264.128366] __submit_bio+0xb0/0x170
[10264.128367] submit_bio_noacct_nocheck+0x159/0x370
[10264.128368] bch2_submit_wbio_replicas+0x21c/0x3a0 [bcachefs 85f1b9a7a824f272eff794653a06dde1a94439f2]
[10264.128391] btree_write_submit+0x1cf/0x220 [bcachefs 85f1b9a7a824f272eff794653a06dde1a94439f2]
[10264.128406] process_one_work+0x178/0x350
[10264.128408] worker_thread+0x30f/0x450
[10264.128409] kthread+0xe5/0x120
The zswap shrinker resumes the swap_writepage()s that were intercepted
by the zswap store. This will enter the block layer, and may even
enter the filesystem depending on the swap backing file.
Make it respect GFP_NOIO and GFP_NOFS.
Link: https://lore.kernel.org/linux-mm/rc4pk2r42oyvjo4dc62z6sovquyllq56i5cdgcaqbd7wy3hfzr@n4nbxido3fme/
Link: https://lkml.kernel.org/r/20240321182532.60000-1-hannes@cmpxchg.org
Fixes: b5ba474f3f51 ("zswap: shrink zswap pool based on memory pressure")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reported-by: Jérôme Poulin <jeromepoulin@gmail.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: stable@vger.kernel.org [v6.8]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On v5 and lower CPUs we can't provide MDWE protection, so ensure we fail
any attempt to enable it via prctl(PR_SET_MDWE).
Previously such an attempt would misleadingly succeed, leading to any
subsequent mmap(PROT_READ|PROT_WRITE) or execve() failing unconditionally
(the latter somewhat violently via force_fatal_sig(SIGSEGV) due to
READ_IMPLIES_EXEC).
Link: https://lkml.kernel.org/r/20240227013546.15769-6-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: <stable@vger.kernel.org> [6.3+]
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sam James <sam@gentoo.org>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "ARM: prctl: Reject PR_SET_MDWE where not supported".
I noticed after a recent kernel update that my ARM926 system started
segfaulting on any execve() after calling prctl(PR_SET_MDWE). After some
investigation it appears that ARMv5 is incapable of providing the
appropriate protections for MDWE, since any readable memory is also
implicitly executable.
The prctl_set_mdwe() function already had some special-case logic added
disabling it on PARISC (commit 793838138c15, "prctl: Disable
prctl(PR_SET_MDWE) on parisc"); this patch series (1) generalizes that
check to use an arch_*() function, and (2) adds a corresponding override
for ARM to disable MDWE on pre-ARMv6 CPUs.
With the series applied, prctl(PR_SET_MDWE) is rejected on ARMv5 and
subsequent execve() calls (as well as mmap(PROT_READ|PROT_WRITE)) can
succeed instead of unconditionally failing; on ARMv6 the prctl works as it
did previously.
[0] https://lore.kernel.org/all/2023112456-linked-nape-bf19@gregkh/
This patch (of 2):
There exist systems other than PARISC where MDWE may not be feasible to
support; rather than cluttering up the generic code with additional
arch-specific logic let's add a generic function for checking MDWE support
and allow each arch to override it as needed.
Link: https://lkml.kernel.org/r/20240227013546.15769-4-zev@bewilderbeest.net
Link: https://lkml.kernel.org/r/20240227013546.15769-5-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sam James <sam@gentoo.org>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The dm-devel@lists.linux.dev mailing list should only be listed under the
L: (List) tag in the MAINTAINERS file. However, it was incorrectly listed
under both L: and M: (Maintainers) tags, which is not accurate. Remove
the M: tag for dm-devel@lists.linux.dev in the MAINTAINERS file to reflect
the correct categorization.
Link: https://lkml.kernel.org/r/20240319181842.249547-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Matthew Sakai <msakai@redhat.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sg_init_one() relies on linearly mapped low memory for the safe
utilization of virt_to_page(). Otherwise, we trigger a kernel BUG,
kernel BUG at include/linux/scatterlist.h:187!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 2997 Comm: syz-executor198 Not tainted 6.8.0-syzkaller #0
Hardware name: ARM-Versatile Express
PC is at sg_set_buf include/linux/scatterlist.h:187 [inline]
PC is at sg_init_one+0x9c/0xa8 lib/scatterlist.c:143
LR is at sg_init_table+0x2c/0x40 lib/scatterlist.c:128
Backtrace:
[<807e16ac>] (sg_init_one) from [<804c1824>] (zswap_decompress+0xbc/0x208 mm/zswap.c:1089)
r7:83471c80 r6:def6d08c r5:844847d0 r4:ff7e7ef4
[<804c1768>] (zswap_decompress) from [<804c4468>] (zswap_load+0x15c/0x198 mm/zswap.c:1637)
r9:8446eb80 r8:8446eb80 r7:8446eb84 r6:def6d08c r5:00000001 r4:844847d0
[<804c430c>] (zswap_load) from [<804b9644>] (swap_read_folio+0xa8/0x498 mm/page_io.c:518)
r9:844ac800 r8:835e6c00 r7:00000000 r6:df955d4c r5:00000001 r4:def6d08c
[<804b959c>] (swap_read_folio) from [<804bb064>] (swap_cluster_readahead+0x1c4/0x34c mm/swap_state.c:684)
r10:00000000 r9:00000007 r8:df955d4b r7:00000000 r6:00000000 r5:00100cca
r4:00000001
[<804baea0>] (swap_cluster_readahead) from [<804bb3b8>] (swapin_readahead+0x68/0x4a8 mm/swap_state.c:904)
r10:df955eb8 r9:00000000 r8:00100cca r7:84476480 r6:00000001 r5:00000000
r4:00000001
[<804bb350>] (swapin_readahead) from [<8047cde0>] (do_swap_page+0x200/0xcc4 mm/memory.c:4046)
r10:00000040 r9:00000000 r8:844ac800 r7:84476480 r6:00000001 r5:00000000
r4:df955eb8
[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_pte_fault mm/memory.c:5301 [inline])
[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (__handle_mm_fault mm/memory.c:5439 [inline])
[<8047cbe0>] (do_swap_page) from [<8047e6c4>] (handle_mm_fault+0x3d8/0x12b8 mm/memory.c:5604)
r10:00000040 r9:842b3900 r8:7eb0d000 r7:84476480 r6:7eb0d000 r5:835e6c00
r4:00000254
[<8047e2ec>] (handle_mm_fault) from [<80215d28>] (do_page_fault+0x148/0x3a8 arch/arm/mm/fault.c:326)
r10:00000007 r9:842b3900 r8:7eb0d000 r7:00000207 r6:00000254 r5:7eb0d9b4
r4:df955fb0
[<80215be0>] (do_page_fault) from [<80216170>] (do_DataAbort+0x38/0xa8 arch/arm/mm/fault.c:558)
r10:7eb0da7c r9:00000000 r8:80215be0 r7:df955fb0 r6:7eb0d9b4 r5:00000207
r4:8261d0e0
[<80216138>] (do_DataAbort) from [<80200e3c>] (__dabt_usr+0x5c/0x60 arch/arm/kernel/entry-armv.S:427)
Exception stack(0xdf955fb0 to 0xdf955ff8)
5fa0: 00000000 00000000 22d5f800 0008d158
5fc0: 00000000 7eb0d9a4 00000000 00000109 00000000 00000000 7eb0da7c 7eb0da3c
5fe0: 00000000 7eb0d9a0 00000001 00066bd4 00000010 ffffffff
r8:824a9044 r7:835e6c00 r6:ffffffff r5:00000010 r4:00066bd4
Code: 1a000004 e1822003 e8860094 e89da8f0 (e7f001f2)
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
0: 1a000004 bne 0x18
4: e1822003 orr r2, r2, r3
8: e8860094 stm r6, {r2, r4, r7}
c: e89da8f0 ldm sp, {r4, r5, r6, r7, fp, sp, pc}
* 10: e7f001f2 udf #18 <-- trapping instruction
Consequently, we have two choices: either employ kmap_to_page() alongside
sg_set_page(), or resort to copying high memory contents to a temporary
buffer residing in low memory. However, considering the introduction of
the WARN_ON_ONCE in commit ef6e06b2ef870 ("highmem: fix kmap_to_page() for
kmap_local_page() addresses"), which specifically addresses high memory
concerns, it appears that memcpy remains the sole viable option.
Link: https://lkml.kernel.org/r/20240318234706.95347-1-21cnbao@gmail.com
Fixes: 270700dd06ca ("mm/zswap: remove the memcpy if acomp is not sleepable")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reported-by: syzbot+adbc983a1588b7805de3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000bbb3d80613f243a6@google.com/
Tested-by: syzbot+adbc983a1588b7805de3@syzkaller.appspotmail.com
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The atexit() is called from parent process as well as forked processes.
Hence the child restores the settings at exit while the parent is still
executing. Fix this by checking pid of atexit() calling process and only
restore THP number from parent process.
Link: https://lkml.kernel.org/r/20240314094045.157149-1-usama.anjum@collabora.com
Fixes: c23ea61726d5 ("selftests/mm: protection_keys: save/restore nr_hugepages settings")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The tools/cgroup directory no longer contains a Makefile. This patch
updates the top-level tools/Makefile to remove references to building and
installing cgroup components. This change reflects the current structure
of the tools directory and fixes the build failure when building tools in
the top-level directory.
linux/tools$ make cgroup
DESCEND cgroup
make[1]: *** No targets specified and no makefile found. Stop.
make: *** [Makefile:73: cgroup] Error 2
Link: https://lkml.kernel.org/r/20240315012249.439639-1-liucong2@kylinos.cn
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When cachestat on shmem races with swapping and invalidation, there
are two possible bugs:
1) A swapin error can have resulted in a poisoned swap entry in the
shmem inode's xarray. Calling get_shadow_from_swap_cache() on it
will result in an out-of-bounds access to swapper_spaces[].
Validate the entry with non_swap_entry() before going further.
2) When we find a valid swap entry in the shmem's inode, the shadow
entry in the swapcache might not exist yet: swap IO is still in
progress and we're before __remove_mapping; swapin, invalidation,
or swapoff have removed the shadow from swapcache after we saw the
shmem swap entry.
This will send a NULL to workingset_test_recent(). The latter
purely operates on pointer bits, so it won't crash - node 0, memcg
ID 0, eviction timestamp 0, etc. are all valid inputs - but it's a
bogus test. In theory that could result in a false "recently
evicted" count.
Such a false positive wouldn't be the end of the world. But for
code clarity and (future) robustness, be explicit about this case.
Bail on get_shadow_from_swap_cache() returning NULL.
Link: https://lkml.kernel.org/r/20240315095556.GC581298@cmpxchg.org
Fixes: cf264e1329fb ("cachestat: implement cachestat syscall")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Chengming Zhou <chengming.zhou@linux.dev> [Bug #1]
Reported-by: Jann Horn <jannh@google.com> [Bug #2]
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org> [v6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 104 thread, 2 socket Skylake system, Intel report a 4.7% performance
reduction with will-it-scale page_fault2. This was due to reducing the
size of the batch from 32 to 15. Increasing the folio batch size from 15
to 31 gives a performance increase of 12.5% relative to the original, or
17.2% relative to the reduced performance commit.
The penalty of this commit is an additional 128 bytes of stack usage. Six
folio_batches are also allocated from percpu memory in cpu_fbatches so
that will be an additional 768 bytes of percpu memory (per CPU). Tim Chen
originally submitted a patch like this in 2020:
https://lore.kernel.org/linux-mm/d1cc9f12a8ad6c2a52cb600d93b06b064f2bbc57.1593205965.git.tim.c.chen@linux.intel.com/
Link: https://lkml.kernel.org/r/20240315140823.2478146-1-willy@infradead.org
Fixes: 99fbb6bfc16f ("mm: make folios_put() the basis of release_pages()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403151058.7048f6a8-oliver.sang@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
