| Age | Commit message (Collapse) | Author |
|---|
|
Instead of pr_xxx() macro, use dev_xxx() to print log.
This patch changes some error log level to warn log level when
the tpm_crb_ffa secure partition doesn't support properly but
system can run without it.
(i.e) unsupport of direct message ABI or unsupported ABI version
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
For secure partition with multi service, tpm_ffa_crb can access tpm
service with direct message request v2 interface according to chapter 3.3,
TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET.
This patch reflects this spec to access tpm service over
FF-A direct message request v2 ABI.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The kmalloc failure message is just noise. Remove it and replace -EFAULT
with -ENOMEM as standard for out of memory allocation error returns.
Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- dell-wmi-sysman: Avoid buffer overflow in current_password_store()
- fujitsu-laptop: Support Lifebook S2110 hotkeys
- intel/pmc: Fix Arrow Lake U/H NPU PCI ID
- think-lmi: Fix attribute name usage for non-compliant items
- thinkpad_acpi: Ignore battery threshold change event notification
* tag 'platform-drivers-x86-v6.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/pmc: Fix Arrow Lake U/H NPU PCI ID
platform/x86: think-lmi: Fix attribute name usage for non-compliant items
platform/x86: thinkpad_acpi: Ignore battery threshold change event notification
platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store()
platform/x86: fujitsu-laptop: Support Lifebook S2110 hotkeys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a small set of fixes for the blocking buffer lookup
conversion done earlier this cycle.
It adds a missing conversion in the getblk slowpath and a few minor
optimizations and cleanups"
* tag 'vfs-6.15-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
|
|
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea9d ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"Small stuff, main ones users will be interested in:
- Couple more casefolding fixes; we can now detect and repair
casefolded dirents in non-casefolded dir and vice versa
- Fix for massive write inflation with mmapped io, which hit certain
databases"
* tag 'bcachefs-2025-05-22' of git://evilpiepirate.org/bcachefs:
bcachefs: Check for casefolded dirents in non casefolded dirs
bcachefs: Fix bch2_dirent_create_snapshot() for casefolding
bcachefs: Fix casefold opt via xattr interface
bcachefs: mkwrite() now only dirties one page
bcachefs: fix extent_has_stripe_ptr()
bcachefs: Fix bch2_btree_path_traverse_cached() when paths realloced
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix error checking in genpd_dev_pm_attach_by_id()
Providers:
- renesas: Remove obsolete nullify checks for rcar domains"
* tag 'pmdomain-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: core: Fix error checking in genpd_dev_pm_attach_by_id()
pmdomain: renesas: rcar: Remove obsolete nullify checks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci_am654: Fix MMC init failures on am62x boards
- sdhci-of-dwcmshc: Add PD workaround on RK3576 to avoid hang
* tag 'mmc-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Add SDHCI_QUIRK2_SUPPRESS_V1P8_ENA quirk to am62 compatible
mmc: sdhci-of-dwcmshc: add PD workaround on RK3576
|
|
Pull block fixes from Jens Axboe:
- Fix for a regression with setting up loop on a file system
without ->write_iter()
- Fix for an nvme sysfs regression
* tag 'block-6.15-20250522' of git://git.kernel.dk/linux:
nvme: avoid creating multipath sysfs group under namespace path devices
loop: don't require ->write_iter for writable files in loop_configure
|
|
Pull io_uring fixes from Jens Axboe:
- Kill a duplicate function definition, which can cause linking issues
in certain .config configurations. Introduced in this cycle.
- Fix for a potential overflow CQE reordering issue if a re-schedule is
done during posting. Heading to stable.
- Fix for an issue with recv bundles, where certain conditions can lead
to gaps in the buffers, where a contiguous buffer range was expected.
Heading to stable.
* tag 'io_uring-6.15-20250522' of git://git.kernel.dk/linux:
io_uring/net: only retry recv bundle for a full transfer
io_uring: fix overflow resched cqe reordering
io_uring/cmd: axe duplicate io_uring_cmd_import_fixed_vec() declaration
|
|
Pull smb client fixes from Steve French:
- Two fixes for use after free in readdir code paths
* tag '6.15-rc8-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Reset all search buffer pointers when releasing buffer
smb: client: Fix use-after-free in cifs_fill_dirent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is somewhat larger than what I hoped for, with a few PRs from
subsystems and follow-ups for the recent netdev locking changes,
anyhow there are no known pending regressions.
Including fixes from bluetooth, ipsec and CAN.
Current release - regressions:
- eth: team: grab team lock during team_change_rx_flags
- eth: bnxt_en: fix netdev locking in ULP IRQ functions
Current release - new code bugs:
- xfrm: ipcomp: fix truesize computation on receive
- eth: airoha: fix page recycling in airoha_qdma_rx_process()
Previous releases - regressions:
- sched: hfsc: fix qlen accounting bug when using peek in
hfsc_enqueue()
- mr: consolidate the ipmr_can_free_table() checks.
- bridge: netfilter: fix forwarding of fragmented packets
- xsk: bring back busy polling support in XDP_COPY
- can:
- add missing rcu read protection for procfs content
- kvaser_pciefd: force IRQ edge in case of nested IRQ
Previous releases - always broken:
- xfrm: espintcp: remove encap socket caching to avoid reference leak
- bluetooth: use skb_pull to avoid unsafe access in QCA dump handling
- eth: idpf:
- fix null-ptr-deref in idpf_features_check
- fix idpf_vport_splitq_napi_poll()
- eth: hibmcge: fix wrong ndo.open() after reset fail issue"
* tag 'net-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-af: Fix APR entry mapping based on APR_LMT_CFG
octeontx2-af: Set LMT_ENA bit for APR table entries
net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done
octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf
selftests/tc-testing: Add an HFSC qlen accounting test
sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()
idpf: fix idpf_vport_splitq_napi_poll()
net: hibmcge: fix wrong ndo.open() after reset fail issue.
net: hibmcge: fix incorrect statistics update issue
xsk: Bring back busy polling support in XDP_COPY
can: slcan: allow reception of short error messages
net: lan743x: Restore SGMII CTRL register on resume
bnxt_en: Fix netdev locking in ULP IRQ functions
MAINTAINERS: Drop myself to reviewer for ravb driver
net: dwmac-sun8i: Use parsed internal PHY address instead of 1
net: ethernet: ti: am65-cpsw: Lower random mac address error print to info
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
idpf: fix null-ptr-deref in idpf_features_check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"This deals with a crash in the Qualcomm pin controller GPIO
parts when using hogs.
The first patch to gpiolib makes gpiochip_line_is_valid()
NULL-tolerant.
The second patch fixes the actual problem"
* tag 'pinctrl-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: switch to devm_register_sys_off_handler()
gpiolib: don't crash on enabling GPIO HOG pins
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.15 final. It became slightly a
higher amount than expected, but all look easy and safe to apply:
- A fix for PCM core race spotted by fuzzing
- ASoC topology fix for single DAI link
- UAF fix for ASoC SOF Intel HD-audio at reloading
- ASoC SOF Intel and Mediatek fixes
- Trivial HD-audio quirks as usual"
* tag 'sound-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Add new HP ZBook laptop with micmute led fixup
ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ASP10
ALSA: hda/realtek - restore auto-mute mode for Dell Chrome platform
ALSA: pcm: Fix race of buffer access at PCM OSS layer
ASoC: SOF: Intel: hda: Fix UAF when reloading module
ASoc: SOF: topology: connect DAI to a single DAI link
ASoC: SOF: Intel: hda-bus: Use PIO mode on ACE2+ platforms
ASoC: SOF: ipc4-pcm: Delay reporting is only supported for playback direction
ASoC: SOF: ipc4-control: Use SOF_CTRL_CMD_BINARY as numid for bytes_ext
ASoC: mediatek: mt8188-mt6359: Depend on MT6359_ACCDET set or disabled
ASoC: mediatek: mt8188-mt6359: select CONFIG_SND_SOC_MT6359_ACCDET
|
|
Pull NVMe fix from Christoph:
"nvme fixes for Linux 6.15
- do not create the newly added multipath sysfs group for
non-multipath nodes (Nilay Shroff)"
* tag 'nvme-6.15-2025-05-22' of git://git.infradead.org/nvme:
nvme: avoid creating multipath sysfs group under namespace path devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-22
this is a pull request of 4 patches for net/main.
The first 3 patches are by Axel Forsman and fix a ISR race condition
in the kvaser_pciefd driver.
The last patch is by Carlos Sanchez and fixes the reception of short
error messages in the slcan driver.
* tag 'linux-can-fixes-for-6.15-20250521' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: slcan: allow reception of short error messages
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
====================
Link: https://patch.msgid.link/20250522082344.490913-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Geetha sowjanya says:
====================
octeontx2-af: APR Mapping Fixes
This patch series includes fixes related to APR (LMT)
mapping and debugfs support.
Changes include:
Patch 1:Set LMT_ENA bit for APR table entries.
Enables the LMT line for each PF/VF by setting
the LMT_ENA bit in the APR_LMT_MAP_ENTRY_S
structure.
Patch-2:Fix APR entry in debugfs
The APR table was previously mapped using a fixed size,
which could lead to incorrect mappings when the number
of PFs and VFs differed from the assumed value.
This patch updates the logic to calculate the APR table
size dynamically, based on values from the APR_LMT_CFG
register, ensuring correct representation in debugfs.
====================
Link: https://patch.msgid.link/20250521060834.19780-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation maps the APR table using a fixed size,
which can lead to incorrect mapping when the number of PFs and VFs
varies.
This patch corrects the mapping by calculating the APR table
size dynamically based on the values configured in the
APR_LMT_CFG register, ensuring accurate representation
of APR entries in debugfs.
Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch enables the LMT line for a PF/VF by setting the
LMT_ENA bit in the APR_LMT_MAP_ENTRY_S structure.
Additionally, it simplifies the logic for calculating the
LMTST table index by consistently using the maximum
number of hw supported VFs (i.e., 256).
Fixes: 873a1e3d207a ("octeontx2-af: cn10k: Setting up lmtst map table").
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521060834.19780-2-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
Read of size 8 at addr ffff88807a733000 by task kworker/1:0/25
Call Trace:
kasan_report+0xd9/0x110 mm/kasan/report.c:601
tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
crypto_request_complete include/crypto/algapi.h:266
aead_request_complete include/crypto/internal/aead.h:85
cryptd_aead_crypt+0x3b8/0x750 crypto/cryptd.c:772
crypto_request_complete include/crypto/algapi.h:266
cryptd_queue_worker+0x131/0x200 crypto/cryptd.c:181
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
Allocated by task 8355:
kzalloc_noprof include/linux/slab.h:778
tipc_crypto_start+0xcc/0x9e0 net/tipc/crypto.c:1466
tipc_init_net+0x2dd/0x430 net/tipc/core.c:72
ops_init+0xb9/0x650 net/core/net_namespace.c:139
setup_net+0x435/0xb40 net/core/net_namespace.c:343
copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508
create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x419/0x970 kernel/fork.c:3323
__do_sys_unshare kernel/fork.c:3394
Freed by task 63:
kfree+0x12a/0x3b0 mm/slub.c:4557
tipc_crypto_stop+0x23c/0x500 net/tipc/crypto.c:1539
tipc_exit_net+0x8c/0x110 net/tipc/core.c:119
ops_exit_list+0xb0/0x180 net/core/net_namespace.c:173
cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
After freed the tipc_crypto tx by delete namespace, tipc_aead_encrypt_done
may still visit it in cryptd_queue_worker workqueue.
I reproduce this issue by:
ip netns add ns1
ip link add veth1 type veth peer name veth2
ip link set veth1 netns ns1
ip netns exec ns1 tipc bearer enable media eth dev veth1
ip netns exec ns1 tipc node set key this_is_a_master_key master
ip netns exec ns1 tipc bearer disable media eth dev veth1
ip netns del ns1
The key of reproduction is that, simd_aead_encrypt is interrupted, leading
to crypto_simd_usable() return false. Thus, the cryptd_queue_worker is
triggered, and the tipc_crypto tx will be visited.
tipc_disc_timeout
tipc_bearer_xmit_skb
tipc_crypto_xmit
tipc_aead_encrypt
crypto_aead_encrypt
// encrypt()
simd_aead_encrypt
// crypto_simd_usable() is false
child = &ctx->cryptd_tfm->base;
simd_aead_encrypt
crypto_aead_encrypt
// encrypt()
cryptd_aead_encrypt_enqueue
cryptd_aead_enqueue
cryptd_enqueue_request
// trigger cryptd_queue_worker
queue_work_on(smp_processor_id(), cryptd_wq, &cpu_queue->work)
Fix this by holding net reference count before encrypt.
Reported-by: syzbot+55c12726619ff85ce1f6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=55c12726619ff85ce1f6
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20250520101404.1341730-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Priority flow control is not supported for LBK and SDP vf. This patch
adds support to not add dcbnl_ops for LBK and SDP vf.
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519072658.2960851-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cong Wang says:
====================
net_sched: Fix HFSC qlen/backlog accounting bug and add selftest
This series addresses a long-standing bug in the HFSC qdisc where queue length
and backlog accounting could become inconsistent if a packet is dropped during
a peek-induced dequeue operation, and adds a corresponding selftest to tc-testing.
====================
Link: https://patch.msgid.link/20250518222038.58538-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test reproduces a scenario where HFSC queue length and backlog accounting
can become inconsistent when a peek operation triggers a dequeue and possible
drop before the parent qdisc updates its counters. The test sets up a DRR root
qdisc with an HFSC class, netem, and blackhole children, and uses Scapy to
inject a packet. It helps to verify that HFSC correctly tracks qlen and backlog
even when packets are dropped during peek-induced dequeue.
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-3-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the
child qdisc's peek() operation before incrementing sch->q.qlen and
sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may
trigger an immediate dequeue and potential packet drop. In such cases,
qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog
have not yet been updated, leading to inconsistent queue accounting. This
can leave an empty HFSC class in the active list, causing further
consequences like use-after-free.
This patch fixes the bug by moving the increment of sch->q.qlen and
sch->qstats.backlog before the call to the child qdisc's peek() operation.
This ensures that queue length and backlog are always accurate when packet
drops or dequeues are triggered during the peek.
Fixes: 12d0ad3be9c3 ("net/sched/sch_hfsc.c: handle corner cases where head may change invalidating calculated deadline")
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-2-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
idpf_vport_splitq_napi_poll() can incorrectly return @budget
after napi_complete_done() has been called.
This violates NAPI rules, because after napi_complete_done(),
current thread lost napi ownership.
Move the test against POLL_MODE before the napi_complete_done().
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Reported-by: Peter Newman <peternewman@google.com>
Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a shorter than assumed transfer was seen, a partial buffer will have
been filled. For that case it isn't sane to attempt to fill more into
the bundle before posting a completion, as that will cause a gap in
the received data.
Check if the iterator has hit zero and only allow to continue a bundle
operation if that is the case.
Also ensure that for putting finished buffers, only the current transfer
is accounted. Otherwise too many buffers may be put for a short transfer.
Link: https://github.com/axboe/liburing/issues/1409
Cc: stable@vger.kernel.org
Fixes: 7c71a0af81ba ("io_uring/net: improve recv bundles")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Fixes for some SoC clk drivers:
- Define the gate clk for the OTG PHY on Rockchip RK3576 so the nvmem
driver actually works
- Initialize clk_hw_onecell_data::num before accessing the 'hws'
array to keep UBSAN happy
- Fix a perf degradation on the Allwinner D1 MMC clk that was making
things half bad
- Fix the Allwinner SNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro to have
proper order of arguments"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: d1: Add missing divider for MMC mod clocks
clk: s2mps11: initialise clk_hw_onecell_data::num before accessing ::hws[] in probe()
clk: sunxi-ng: fix order of arguments in clock macro
clk: rockchip: rk3576: define clk_otp_phy_g
|
|
Check for mismatches between casefold dirents and casefold directories.
A mismatch will cause lookups to fail, as we'll be doing the lookup with
the casefolded name, which won't match the non-casefolded dirent, and
vice versa.
Reported-by: Christopher Snowhill <chris@kode54.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_dirent_create_snapshot(), used in fsck, neglected to create a
casefolded dirent.
Just move this into dirent_create_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Changing the casefold option requires extra checks/work - factor out a
helper from bch2_fileattr_set() for the xattr code to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Jijie Shao says:
====================
There are some bugfix for hibmcge driver
v1: https://lore.kernel.org/20250430093127.2400813-1-shaojijie@huawei.com
====================
Link: https://patch.msgid.link/20250517095828.1763126-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the driver reset fails, it may not work properly.
Therefore, the ndo.open() operation should be rejected.
In this patch, the driver calls netif_device_detach()
before the reset and calls netif_device_attach()
after the reset succeeds. If the reset fails,
netif_device_attach() is not called. Therefore,
netdev does not present and cannot be opened.
If reset fails, only the PCI reset (via sysfs)
can be used to attempt recovery.
Fixes: 3f5a61f6d504 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the user dumps statistics, the hibmcge driver automatically
updates all statistics. If the driver is performing the reset operation,
the error data of 0xFFFFFFFF is updated.
Therefore, if the driver is resetting, the hbg_update_stats_by_info()
needs to return directly.
Fixes: c0bf9bf31e79 ("net: hibmcge: Add support for dump statistics")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 6.15 (part 1)
Fix uDPU board LEDs by correcting pinctrl state
* tag 'mvebu-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Link: https://lore.kernel.org/r/87wmagpr0a.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.15
Only one fix:
Switch back to I2C for PMICs on Allwinner H6 devices. Apparently using
Allwinner's proprietary bus ended up causing issues when the PMIC was
sharing the bus with other devices.
* tag 'sunxi-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
Link: https://lore.kernel.org/r/aCaeLgjZllV7bauX@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 17ec3e71ba79 ("crypto: lib/Kconfig - Hide arch options from
user"), the CRYPTO_CHACHA20_NEON option is no longer selected by default
due to changes in how crypto library options are exposed and selected.
To restore the previous behavior and ensure CRYPTO_CHACHA20_NEON is
enabled, explicitly select CONFIG_CRYPTO_CHACHA20 in the defconfig. This
pulls in CRYPTO_LIB_CHACHA_INTERNAL and allows CRYPTO_CHACHA20_NEON to be
selected automatically as before.
Fixes: 17ec3e71ba79 ("crypto: lib/Kconfig - Hide arch options from user")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung SoC driver fixes for v6.15
1. Exynos ACPM driver (used on Google GS101): Fix timeout due to missing
responses from the firmware part.
2. Samsung USI (serial engines) driver: Correct ineffective
unconfiguring of the interface during probe removal.
* tag 'samsung-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
Link: https://lore.kernel.org/r/20250513101023.21552-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Leaving the CQ critical section in the middle of a overflow flushing
can cause cqe reordering since the cache cq pointers are reset and any
new cqe emitters that might get called in between are not going to be
forced into io_cqe_cache_refill().
Fixes: eac2ca2d682f9 ("io_uring: check if we need to reschedule during overflow flush")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/90ba817f1a458f091f355f407de1c911d2b93bbf.1747483784.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 4dbd2b2ebe4c ("nvme-multipath: Add visibility for round-robin
io-policy") introduced the creation of the multipath sysfs group under
the NVMe head gendisk device node. However, it also inadvertently added
the same sysfs group under each namespace path device which head node
refers to and that is incorrect.
The multipath sysfs group should only be exposed through the namespace
head gendisk node. This is sufficient, as the head device already
provides symbolic links to the individual namespace paths it manages.
This patch fixes the issue by preventing the creation of the multipath
sysfs group under namespace path devices, ensuring it only appears under
the head disk node.
Fixes: 4dbd2b2ebe4c ("nvme-multipath: Add visibility for round-robin io-policy")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 5ef44b3cb43b ("xsk: Bring back busy polling support") fixed the
busy polling support in xsk for XDP_ZEROCOPY after it was broken in
commit 86e25f40aa1e ("net: napi: Add napi_config"). The busy polling
support with XDP_COPY remained broken since the napi_id setup in
xsk_rcv_check was removed.
Bring back the setup of napi_id for XDP_COPY so socket level SO_BUSYPOLL
can be used to poll the underlying napi.
Do the setup of napi_id for XDP_COPY in xsk_bind, as it is done
currently for XDP_ZEROCOPY. The setup of napi_id for XDP_COPY in
xsk_bind is safe because xsk_rcv_check checks that the rx queue at which
the packet arrives is equal to the queue_id that was supplied in bind.
This is done for both XDP_COPY and XDP_ZEROCOPY mode.
Tested using AF_XDP support in virtio-net by running the xsk_rr AF_XDP
benchmarking tool shared here:
https://lore.kernel.org/all/20250320163523.3501305-1-skhawaja@google.com/T/
Enabled socket busy polling using following commands in qemu,
```
sudo ethtool -L eth0 combined 1
echo 400 | sudo tee /proc/sys/net/core/busy_read
echo 100 | sudo tee /sys/class/net/eth0/napi_defer_hard_irqs
echo 15000 | sudo tee /sys/class/net/eth0/gro_flush_timeout
```
Fixes: 5ef44b3cb43b ("xsk: Bring back busy polling support")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allows slcan to receive short messages (typically errors) from the serial
interface.
When error support was added to slcan protocol in
b32ff4668544e1333b694fcc7812b2d7397b4d6a ("can: slcan: extend the protocol
with error info") the minimum valid message size changed from 5 (minimum
standard can frame tIII0) to 3 ("e1a" is a valid protocol message, it is
one of the examples given in the comments for slcan_bump_err() ), but the
check for minimum message length prodicating all decoding was not adjusted.
This makes short error messages discarded and error frames not being
generated.
This patch changes the minimum length to the new minimum (3 characters,
excluding terminator, is now a valid message).
Signed-off-by: Carlos Sanchez <carlossanchez@geotab.com>
Fixes: b32ff4668544 ("can: slcan: extend the protocol with error info")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250520102305.1097494-1-carlossanchez@geotab.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Davidlohr Bueso <dave@stgolabs.net> says:
Four small patches - the first could be sent to Linus for v6.15
considering it is a missing nonblocking lookup conversion in the getblk
slowpath I had missed. The other two patches are small optimizations
found while reading the code, and one rocket science cleanup patch.
* patches from https://lore.kernel.org/20250515173925.147823-1-dave@stgolabs.net:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
Link: https://lore.kernel.org/20250515173925.147823-1-dave@stgolabs.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
While invalidating, the clearing of the bits in discard_buffer()
is done in one fully ordered CAS operation. In the past this was
done via individual clear_bit(), until e7470ee89f0 (fs: buffer:
do not use unnecessary atomic operations when discarding buffers).
This implies that there were never strong ordering requirements
outside of being serialized by the buffer lock.
As such relax the ordering for archs that can benefit. Further,
the implied ordering in buffer_unlock() makes current cmpxchg
implied barrier redundant due to release semantics. And while in
theory the unlock could be part of the bulk clearing, it is
best to leave it explicit, but without the double barriers.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-5-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Get rid of those unnecessary return statements.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-4-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__getblk_slow() already implies failing a first lookup
as the fastpath, so try to create the buffers immediately
and avoid the redundant lookup. This saves 5-10% of the
total cost/latency of the slowpath.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-3-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just as with the fast path, call the lookup variant depending
on the gfp flags.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-2-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc fix from Bjorn Andersson:
"Address a regression preventing the wireless subsystem remoteproc on
some Qualcomm platforms (e.g. SDM632) from working"
* tag 'rproc-v6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_wcnss: Fix on platforms without fallback regulators
|
