summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-07-13drm/amdgpu/display - only update eDP's backlight level when necessaryZhan Liu
[Why] The original logic is to update eDP's backlight level on every amdgpu dm atomic commit, which causes excessive DMUB write. As a result, when playing game or moving window around, DMUB timeout and system lagging are observed. [How] We only need to update eDP's backlight level when current level doesn't match requested level. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdkfd: handle fault counters on invalid addressPhilip Yang
prange is NULL if vm fault retry on invalid address, for this case, can not use prange to get pdd, use adev to get gpuidx and then get pdd instead, then increase pdd vm fault counter. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu: Correct the irq numbers for virtual crtcEmily Deng
The irq number should be decided by num_crtc, and the num_crtc could change by parameter. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amd/display: update header file nameXiaomeng Hou
Update the register header file name. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carpXiaomeng Hou
Since there's nothing special in smu implementation for yellow carp, it's better to reuse the common smu_v13_0 interfaces and drop the specific smu_v13_0_1.c|h files. v2: remove the duplicate register offset and shift mask header files as well. Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kevin Wang <kevin1.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amd/display: remove faulty assertDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13Revert "drm/amd/display: Always write repeater mode regardless of LTTPR"Wesley Chalmers
This reverts commit 2b7605d73b97e2fa28e0817242e66ca968d2a7cb Some displays are not lighting up when put in LTTPR Transparent Mode Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-13drm/amd/display: Fix updating infoframe for DCN3.1 eDPNicholas Kazlauskas
[Why] We're only treating TMDS as a valid target for infoframe updates which results in PSR being unable to transition from state 4 to state 5. [How] Also allow infoframe updates for DCN3.1 - following how we handle this path for earlier ASIC as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu: Return error if no RASLuben Tuikov
In amdgpu_ras_query_error_count() return an error if the device doesn't support RAS. This prevents that function from having to always set the values of the integer pointers (if set), and thus prevents function side effects--always to have to set values of integers if integer pointers set, regardless of whether RAS is supported or not--with this change this side effect is mitigated. Also, if no pointers are set, don't count, since we've no way of reporting the counts. Also, give this function a kernel-doc. Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Reported-by: Tom Rix <trix@redhat.com> Fixes: a46751fbcde505 ("drm/amdgpu: Fix RAS function interface") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13drm/amdgpu: SRIOV flr_work should take write_lockJingwen Chen
[Why] If flr_work takes read_lock, then other threads who takes read_lock can access hardware when host is doing vf flr. [How] flr_work should take write_lock to avoid this case. Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-13arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newerNathan Chancellor
Commit 97fed779f2a6 ("arm64: bti: Provide Kconfig for kernel mode BTI") disabled CONFIG_ARM64_BTI_KERNEL when CONFIG_GCOV_KERNEL was enabled and compiling with clang because of warnings that were seen with allmodconfig because LLVM was not emitting PAC/BTI instructions for compiler generated functions: | warning: some functions compiled with BTI and some compiled without BTI | warning: not setting BTI in feature flags This dependency was fine for avoiding the warnings with allmodconfig until commit 51c2ee6d121c ("Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR"), which prevents CONFIG_GCOV_KERNEL from being enabled with clang 12.0.0 or older because those versions do not support the no_profile_instrument_function attribute. As a result, CONFIG_ARM64_BTI_KERNEL gets enabled with allmodconfig and there are more warnings like the ones above due to CONFIG_KASAN, which suffers from the same problem as CONFIG_GCOV_KERNEL. This was most likely not noticed at the time because allmodconfig + CONFIG_GCOV_KERNEL=n was not tested. defconfig + CONFIG_KASAN=y is enough to reproduce the same warnings as above. The root cause of the warnings was resolved in LLVM during the 12.0.0 release so rather than play whack-a-mole with the dependencies, just update CONFIG_ARM64_BTI_KERNEL to require clang 12.0.0, which will have all of the issues ironed out. Link: https://github.com/ClangBuiltLinux/linux/issues/1428 Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010034706?check_suite_focus=true Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010035725?check_suite_focus=true Link: https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20210712214636.3134425-1-nathan@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-07-13fbmem: Do not delete the mode that is still in useZhen Lei
The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 13ff178ccd6d ("fbcon: Call fbcon_mode_deleted/new_modelist directly") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: <stable@vger.kernel.org> # v5.3+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210712085544.2828-1-thunder.leizhen@huawei.com
2021-07-13Merge remote-tracking branch 'drm-misc/drm-misc-next-fixes' into drm-misc-fixesThomas Zimmermann
Picking up left-over patches in drm-misc-next-fixes.
2021-07-13Merge tag 'drm-misc-fixes-2021-07-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * dma-buf: Fix fence leak in sync_file_merge() error code * drm/panel: nt35510: Don't fail on DSI reads Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YO07pEfweKVO+7y0@linux-uq9g
2021-07-13firmware: arm_scmi: Fix range check for the maximum number of pending messagesCristian Marussi
SCMI message headers carry a sequence number and such field is sized to allow for MSG_TOKEN_MAX distinct numbers; moreover zero is not really an acceptable maximum number of pending in-flight messages. Fix accordingly the checks performed on the value exported by transports in scmi_desc.max_msg Link: https://lore.kernel.org/r/20210712141833.6628-3-cristian.marussi@arm.com Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> [sudeep.holla: updated the patch title and error message] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-13firmware: arm_scmi: Avoid padding in sensor message structureCristian Marussi
scmi_resp_sensor_reading_complete structure is meant to represent an SCMI asynchronous reading complete message. The readings field with a 64bit type forces padding and breaks reads in scmi_sensor_reading_get. Split it in two adjacent 32bit readings_low/high subfields to avoid the padding within the structure. Alternatively we could to mark the structure packed. Link: https://lore.kernel.org/r/20210628170042.34105-1-cristian.marussi@arm.com Fixes: e2083d3673916 ("firmware: arm_scmi: Add SCMI v3.0 sensors timestamped reads") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-13firmware: arm_scmi: Fix kernel doc warnings about return valuesCristian Marussi
Kernel doc validation script still complains about the following: |No description found for return value of 'scmi_get_protocol_device' |No description found for return value of 'scmi_devm_notifier_register' |No description found for return value of 'scmi_devm_notifier_unregister' Fix adding missing Return kernel-doc statements. Link: https://lore.kernel.org/r/20210712143504.33541-1-cristian.marussi@arm.com Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-13firmware: arm_scpi: Fix kernel doc warningsSudeep Holla
Kernel doc validation script is unhappy and complains with the below set of warnings. | Function parameter or member 'device_domain_id' not described in 'scpi_ops' | Function parameter or member 'get_transition_latency' not described in 'scpi_ops' | Function parameter or member 'add_opps_to_device' not described in 'scpi_ops' | Function parameter or member 'sensor_get_capability' not described in 'scpi_ops' | Function parameter or member 'sensor_get_info' not described in 'scpi_ops' | Function parameter or member 'sensor_get_value' not described in 'scpi_ops' | Function parameter or member 'device_get_power_state' not described in 'scpi_ops' | Function parameter or member 'device_set_power_state' not described in 'scpi_ops' Fix them adding appropriate documents or missing keywords. Link: https://lore.kernel.org/r/20210712130801.2436492-1-sudeep.holla@arm.com Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-13firmware: arm_scmi: Fix kernel doc warningsSudeep Holla
Kernel doc validation script is unhappy and complains with the below set of warnings. | Function parameter or member 'fast_switch_possible' not described in 'scmi_perf_proto_ops' | Function parameter or member 'power_scale_mw_get' not described in 'scmi_perf_proto_ops' | cannot understand function prototype: 'struct scmi_sensor_reading ' | cannot understand function prototype: 'struct scmi_range_attrs ' | cannot understand function prototype: 'struct scmi_sensor_axis_info ' | cannot understand function prototype: 'struct scmi_sensor_intervals_info ' Fix them adding appropriate documents or missing keywords. Link: https://lore.kernel.org/r/20210712130801.2436492-2-sudeep.holla@arm.com Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-13nvme-pci: do not call nvme_dev_remove_admin from nvme_removeCasey Chen
nvme_dev_remove_admin could free dev->admin_q and the admin_tagset while they are being accessed by nvme_dev_disable(), which can be called by nvme_reset_work via nvme_remove_dead_ctrl. Commit cb4bfda62afa ("nvme-pci: fix hot removal during error handling") intended to avoid requests being stuck on a removed controller by killing the admin queue. But the later fix c8e9e9b7646e ("nvme-pci: unquiesce admin queue on shutdown"), together with nvme_dev_disable(dev, true) right before nvme_dev_remove_admin() could help dispatch requests and fail them early, so we don't need nvme_dev_remove_admin() any more. Fixes: cb4bfda62afa ("nvme-pci: fix hot removal during error handling") Signed-off-by: Casey Chen <cachen@purestorage.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-13nvme-pci: fix multiple races in nvme_setup_io_queuesCasey Chen
Below two paths could overlap each other if we power off a drive quickly after powering it on. There are multiple races in nvme_setup_io_queues() because of shutdown_lock missing and improper use of NVMEQ_ENABLED bit. nvme_reset_work() nvme_remove() nvme_setup_io_queues() nvme_dev_disable() ... ... A1 clear NVMEQ_ENABLED bit for admin queue lock retry: B1 nvme_suspend_io_queues() A2 pci_free_irq() admin queue B2 nvme_suspend_queue() admin queue A3 pci_free_irq_vectors() nvme_pci_disable() A4 nvme_setup_irqs(); B3 pci_free_irq_vectors() ... unlock A5 queue_request_irq() for admin queue set NVMEQ_ENABLED bit ... nvme_create_io_queues() A6 result = queue_request_irq(); set NVMEQ_ENABLED bit ... fail to allocate enough IO queues: A7 nvme_suspend_io_queues() goto retry If B3 runs in between A1 and A2, it will crash if irqaction haven't been freed by A2. B2 is supposed to free admin queue IRQ but it simply can't fulfill the job as A1 has cleared NVMEQ_ENABLED bit. Fix: combine A1 A2 so IRQ get freed as soon as the NVMEQ_ENABLED bit gets cleared. After solved #1, A2 could race with B3 if A2 is freeing IRQ while B3 is checking irqaction. A3 also could race with B2 if B2 is freeing IRQ while A3 is checking irqaction. Fix: A2 and A3 take lock for mutual exclusion. A3 could race with B3 since they could run free_msi_irqs() in parallel. Fix: A3 takes lock for mutual exclusion. A4 could fail to allocate all needed IRQ vectors if A3 and A4 are interrupted by B3. Fix: A4 takes lock for mutual exclusion. If A5/A6 happened after B2/B1, B3 will crash since irqaction is not NULL. They are just allocated by A5/A6. Fix: Lock queue_request_irq() and setting of NVMEQ_ENABLED bit. A7 could get chance to pci_free_irq() for certain IO queue while B3 is checking irqaction. Fix: A7 takes lock. nvme_dev->online_queues need to be protected by shutdown_lock. Since it is not atomic, both paths could modify it using its own copy. Co-developed-by: Yuanyuan Zhong <yzhong@purestorage.com> Signed-off-by: Casey Chen <cachen@purestorage.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-13nvme-tcp: use __dev_get_by_name instead dev_get_by_name for OPT_HOST_IFACEPrabhakar Kushwaha
dev_get_by_name() finds network device by name but it also increases the reference count. If a nvme-tcp queue is present and the network device driver is removed before nvme_tcp, we will face the following continuous log: "kernel:unregister_netdevice: waiting for <eth> to become free. Usage count = 2" And rmmod further halts. Similar case arises during reboot/shutdown with nvme-tcp queue present and both never completes. To fix this, use __dev_get_by_name() which finds network device by name without increasing any reference counter. Fixes: 3ede8f72a9a2 ("nvme-tcp: allow selecting the network interface for connections") Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> [hch: remove the ->ndev member entirely] Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-07-13ARM: shmobile: defconfig: Restore graphical consolesGeert Uytterhoeven
As of commit f611b1e7624ccdbd ("drm: Avoid circular dependencies for CONFIG_FB"), CONFIG_FB is no longer auto-enabled. While CONFIG_FB may be considered unneeded for systems where graphics is provided by a DRM driver, R-Mobile A1 still relies on a frame buffer device driver for graphics support. Restore support for graphics on R-Mobile A1 and graphical consoles on DRM-based systems by explicitly enabling CONFIG_FB in the defconfig for Renesas ARM systems. Fixes: f611b1e7624ccdbd ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/2a4474be1d2c00c6ca97c2714844ea416a9ea9a9.1626084948.git.geert+renesas@glider.be
2021-07-12drm/msm: Fix fall-through warning in msm_gem_new_impl()Gustavo A. R. Silva
Fix the following fall-through warning: drivers/gpu/drm/msm/msm_gem.c: In function 'msm_gem_new_impl': drivers/gpu/drm/msm/msm_gem.c:1170:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 1170 | if (priv->has_cached_coherent) | ^ drivers/gpu/drm/msm/msm_gem.c:1173:2: note: here 1173 | default: | ^~~~~~~ by replacing the /* fallthrough */ comment with fallthrough; Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-12scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()Jaegeuk Kim
This patch adds a host_lock which existed before on ufshcd_vops_setup_xfer_req(). Link: https://lore.kernel.org/r/20210701005117.3846179-1-jaegeuk@kernel.org Fixes: a45f937110fa ("scsi: ufs: Optimize host lock on transfer requests send/compl paths") Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Can Guo <cang@codeaurora.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12scsi: mpi3mr: Fix W=1 compilation warningsSreekanth Reddy
Fix for the following W=1 compilation warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 64 Link: https://lore.kernel.org/r/20210707081756.20922-1-sreekanth.reddy@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12scsi: pm8001: Clean up kernel-doc and commentsRandy Dunlap
Fix kernel-doc warnings then test again, wash, rinse, find more, then repeat more/again. Also fix spellos, some grammar, and some punctuation. ../drivers/scsi/pm8001/pm8001_ctl.c:557: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_fatal_log_show - fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:577: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** non_fatal_log_show - non fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:622: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_gsm_log_show - gsm dump collection Link: https://lore.kernel.org/r/20210708165723.8594-1-rdunlap@infradead.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12scsi: zfcp: Report port fc_security as unknown early during remote cable pullSteffen Maier
On remote cable pull, a zfcp_port keeps its status and only gets ZFCP_STATUS_PORT_LINK_TEST added. Only after an ADISC timeout, we would actually start port recovery and remove ZFCP_STATUS_COMMON_UNBLOCKED which zfcp_sysfs_port_fc_security_show() detected and reported as "unknown" instead of the old and possibly stale zfcp_port->connection_info. Add check for ZFCP_STATUS_PORT_LINK_TEST for timely "unknown" report. Link: https://lore.kernel.org/r/20210702160922.2667874-1-maier@linux.ibm.com Fixes: a17c78460093 ("scsi: zfcp: report FC Endpoint Security in sysfs") Cc: <stable@vger.kernel.org> #5.7+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12scsi: core: Fix bad pointer dereference when ehandler kthread is invalidTyrel Datwyler
Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 &lt;SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE&gt; CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn. Link: https://lore.kernel.org/r/20210701195659.3185475-1-tyreld@linux.ibm.com Fixes: 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") Cc: stable@vger.kernel.org Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12scsi: fas216: Fix a build errorBart Van Assche
Use SAM_STAT_GOOD instead of GOOD since GOOD has been removed. Link: https://lore.kernel.org/r/20210711033623.11267-1-bvanassche@acm.org Fixes: 3d45cefc8edd ("scsi: core: Drop obsolete Linux-specific SCSI status codes") Fixes: df1303147649 ("scsi: fas216: Use get_status_byte() to avoid using Linux-specific status codes") Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12scsi: core: Fix the documentation of the scsi_execute() time parameterBart Van Assche
The unit of the scsi_execute() timeout parameter is 1/HZ seconds instead of one second, just like the timeouts used in the block layer. Fix the documentation header above the definition of the scsi_execute() macro. Link: https://lore.kernel.org/r/20210709202638.9480-3-bvanassche@acm.org Fixes: "[SCSI] use scatter lists for all block pc requests and simplify hw handlers" # v2.6.16.28 Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: John Garry <john.garry@huawei.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit ↵Paolo Pisati
hot-remove error test While the offline memory test obey ratio limit, the same test with error injection does not and tries to offline all the hotpluggable memory, spamming system logs with hundreds of thousands of dump_page() entries, slowing system down (to the point the test itself timesout and gets terminated) and excessive fs occupation: ... [ 9784.393354] page:c00c0000007d1b40 refcount:3 mapcount:0 mapping:c0000001fc03e950 index:0xe7b [ 9784.393355] def_blk_aops [ 9784.393356] flags: 0x3ffff800002062(referenced|active|workingset|private) [ 9784.393358] raw: 003ffff800002062 c0000001b9343a68 c0000001b9343a68 c0000001fc03e950 [ 9784.393359] raw: 0000000000000e7b c000000006607b18 00000003ffffffff c00000000490d000 [ 9784.393359] page dumped because: migration failure [ 9784.393360] page->mem_cgroup:c00000000490d000 [ 9784.393416] migrating pfn 1f46d failed ret:1 ... $ grep "page dumped because: migration failure" /var/log/kern.log | wc -l 2405558 $ ls -la /var/log/kern.log -rw-r----- 1 syslog adm 2256109539 Jun 30 14:19 /var/log/kern.log Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-07-12kunit: tool: Assert the version requirementSeongJae Park
Commit 87c9c1631788 ("kunit: tool: add support for QEMU") on the 'next' tree adds 'from __future__ import annotations' in 'kunit_kernel.py'. Because it is supported on only >=3.7 Python, people using older Python will get below error: Traceback (most recent call last): File "./tools/testing/kunit/kunit.py", line 20, in <module> import kunit_kernel File "/home/sjpark/linux/tools/testing/kunit/kunit_kernel.py", line 9 from __future__ import annotations ^ SyntaxError: future feature annotations is not defined This commit adds a version assertion in 'kunit.py', so that people get more explicit error message like below: Traceback (most recent call last): File "./tools/testing/kunit/kunit.py", line 15, in <module> assert sys.version_info >= (3, 7), "Python version is too old" AssertionError: Python version is too old Signed-off-by: SeongJae Park <sjpark@amazon.de> Acked-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-07-12kunit: tool: remove unnecessary "annotations" importDaniel Latypov
The import was working around the fact "tuple[T]" was used instead of typing.Tuple[T]. Convert it to use type.Tuple to be consistent with how the rest of the code is anotated. Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-07-12Documentation: kunit: drop obsolete note about uml_abort for coverageDaniel Latypov
Commit b6d5799b0b58 ("kunit: Add 'kunit_shutdown' option") changes KUnit to call kernel_halt() by default when done testing. This fixes the issue with not having .gcda files due to not calling atexit() handlers, and therefore we can stop recommending people manually tweak UML code. The need to use older versions of GCC (<=6) remains however, due to linktime issues, same as before. Note: There also might still be issues with .gcda files as well in newer versions. Signed-off-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-07-12kunit: tool: Fix error messages for cases of no tests and wrong TAP headerRae Moar
This patch addresses misleading error messages reported by kunit_tool in two cases. First, in the case of TAP output having an incorrect header format or missing a header, the parser used to output an error message of 'no tests run!'. Now the parser outputs an error message of 'could not parse test results!'. As an example: Before: $ ./tools/testing/kunit/kunit.py parse /dev/null [ERROR] no tests run! ... After: $ ./tools/testing/kunit/kunit.py parse /dev/null [ERROR] could not parse test results! ... Second, in the case of TAP output with the correct header but no tests, the parser used to output an error message of 'could not parse test results!'. Now the parser outputs an error message of 'no tests run!'. As an example: Before: $ echo -e 'TAP version 14\n1..0' | ./tools/testing/kunit/kunit.py parse [ERROR] could not parse test results! After: $ echo -e 'TAP version 14\n1..0' | ./tools/testing/kunit/kunit.py parse [ERROR] no tests run! Additionally, this patch also corrects the tests in kunit_tool_test.py and adds a test to check the error in the case of TAP output with the correct header but no tests. Signed-off-by: Rae Moar <rmoar@google.com> Reviewed-by: David Gow <davidgow@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-07-12sd: don't mess with SD_MINORS for CONFIG_DEBUG_BLOCK_EXT_DEVTChristoph Hellwig
No need to give up the original sd minor even with this option, and if we did we'd also need to fix the number of minors for this configuration to actually work. Fixes: 7c3f828b522b0 ("block: refactor device number setup in __device_add_disk") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-12mm: Make copy_huge_page() always availableMatthew Wilcox (Oracle)
Rewrite copy_huge_page() and move it into mm/util.c so it's always available. Fixes an exposure of uninitialised memory on configurations with HUGETLB and UFFD enabled and MIGRATION disabled. Fixes: 8cc5fcbb5be8 ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-12mm/rmap: fix munlocking Anon THP with mlocked ptesHugh Dickins
Many thanks to Kirill for reminding that PageDoubleMap cannot be relied on to warn of pte mappings in the Anon THP case; and a scan of subpages does not seem appropriate here. Note how follow_trans_huge_pmd() does not even mark an Anon THP as mlocked when compound_mapcount != 1: multiple mlocking of Anon THP is avoided, so simply return from page_mlock() in this case. Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/ Fixes: d9770fcc1c0c ("mm/rmap: fix old bug: munlocking THP missed other mlocks") Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-12octeontx2-pf: Fix uninitialized boolean variable ppsColin Ian King
In the case where act->id is FLOW_ACTION_POLICE and also act->police.rate_bytes_ps > 0 or act->police.rate_pkt_ps is not > 0 the boolean variable pps contains an uninitialized value when function otx2_tc_act_set_police is called. Fix this by initializing pps to false. Addresses-Coverity: ("Uninitialized scalar variable)" Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-12ipv6: allocate enough headroom in ip6_finish_output2()Vasily Averin
When TEE target mirrors traffic to another interface, sk_buff may not have enough headroom to be processed correctly. ip_finish_output2() detect this situation for ipv4 and allocates new skb with enogh headroom. However ipv6 lacks this logic in ip_finish_output2 and it leads to skb_under_panic: skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24 head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13 Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x48/0x4a Call Trace: skb_push.cold.111+0x10/0x10 ipgre_header+0x24/0xf0 [ip_gre] neigh_connected_output+0xae/0xf0 ip6_finish_output2+0x1a8/0x5a0 ip6_output+0x5c/0x110 nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6] tee_tg6+0x2e/0x40 [xt_TEE] ip6t_do_table+0x294/0x470 [ip6_tables] nf_hook_slow+0x44/0xc0 nf_hook.constprop.34+0x72/0xe0 ndisc_send_skb+0x20d/0x2e0 ndisc_send_ns+0xd1/0x210 addrconf_dad_work+0x3c8/0x540 process_one_work+0x1d1/0x370 worker_thread+0x30/0x390 kthread+0x116/0x130 ret_from_fork+0x22/0x30 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-12net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specificRandy Dunlap
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Martin Schiller <ms@dev.tdt.de> Cc: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-12mtd: cfi_util: Fix unreachable code issueGustavo A. R. Silva
Fix the following warning: drivers/mtd/chips/cfi_util.c:112:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) ^ drivers/mtd/chips/cfi_util.c:168:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) by placing the fallthrough; statement inside ifdeffery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-12fcntl: Fix unreachable code in do_fcntl()Gustavo A. R. Silva
Fix the following warning: fs/fcntl.c:373:3: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__)) by placing the fallthrough; statement inside ifdeffery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-12kernel: debug: Fix unreachable code in gdb_serial_stub()Gustavo A. R. Silva
Fix the following warning: kernel/debug/gdbstub.c:1049:4: warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough] fallthrough; ^ include/linux/compiler_attributes.h:210:41: note: expanded from macro 'fallthrough' # define fallthrough __attribute__((__fallthrough__) by placing the fallthrough; statement inside ifdeffery. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-07-12scripts/spdxcheck.py: Strictly read license files in utf-8Nishanth Menon
Commit bc41a7f36469 ("LICENSES: Add the CC-BY-4.0 license") unfortunately introduced LICENSES/dual/CC-BY-4.0 in UTF-8 Unicode text While python will barf at it with: FAIL: 'ascii' codec can't decode byte 0xe2 in position 2109: ordinal not in range(128) Traceback (most recent call last): File "scripts/spdxcheck.py", line 244, in <module> spdx = read_spdxdata(repo) File "scripts/spdxcheck.py", line 47, in read_spdxdata for l in open(el.path).readlines(): File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode return codecs.ascii_decode(input, self.errors)[0] UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 2109: ordinal not in range(128) While it is indeed debatable if 'Licensor.' used in the license file needs unicode quotes, instead, force spdxcheck to read utf-8. Reported-by: Rahul T R <r-ravikumar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210707204840.30891-1-nm@ti.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-12firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflowSudeep Holla
The ffa_linux_errmap buffer access index is supposed to range from 0-8 but it ranges from 1-9 instead. It reads one element out of bounds. It also changes the success into -EINVAL though ffa_to_linux_errno is never used in case of success, it is expected to work for success case too. It is slightly confusing code as the negative of the error code is used as index to the buffer. Fix it by negating it at the start and make it more readable. Link: https://lore.kernel.org/r/20210707134739.1869481-1-sudeep.holla@arm.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_ffa: Fix the comment styleSudeep Holla
clang produces the following warning: drivers/firmware/arm_ffa/driver.c:123: warning: expecting prototype for FF(). Prototype was for FFA_PAGE_SIZE() instead This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Fix the same by removing the kernel-doc style comment here. Link: https://lore.kernel.org/r/20210622162202.3485866-1-sudeep.holla@arm.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_ffa: Simplify probe functionUwe Kleine-König
When the driver core calls the probe callback it already checked that the devices match, so there is no need to call the match callback again. Link: https://lore.kernel.org/r/20210621201652.127611-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-07-12firmware: arm_ffa: Ensure drivers provide a probe functionUwe Kleine-König
The bus probe callback calls the driver callback without further checking. Better be safe than sorry and refuse registration of a driver without a probe function to prevent a NULL pointer exception. Link: https://lore.kernel.org/r/20210621201652.127611-1-u.kleine-koenig@pengutronix.de Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 21:17:45 +0000