| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt
Fix check warnings all over the place.
mt7986:
- Add crypto, I2C and SPI nodes
mt6795:
- Add clock nodes
- Add DMA support for UARTs
- Add MMC nodes
- Add basic support for Sonyx Xperia M5
mt8195:
- Add video enconder node
- Add PCIe support
- Fine tune capacity-dmips-mhz
- Add support for internal and external display port
* tag 'v6.1-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (35 commits)
arm64: dts: mt7986: add spi related device nodes
arm64: dts: mt7986: move wed_pcie node
arm64: dts: mediatek: Add support for MT6795 Sony Xperia M5 smartphone
dt-bindings: arm: mediatek: Add compatible for MT6795 Sony Xperia M5
arm64: dts: mediatek: mt6795: Add support for eMMC/SD/SDIO controllers
arm64: dts: mediatek: mt6795: Add support for APDMA and wire up UART DMAs
arm64: dts: mediatek: mt6795: Replace UART dummy clocks with pericfg
arm64: dts: mediatek: mt6795: Add topckgen, infra, peri clocks/resets
arm64: dts: mediatek: cherry: Add edptx and dptx support
arm64: dts: mediatek: cherry: Add dp-intf ports
arm64: dts: mt8195: Add edptx and dptx nodes
arm64: dts: mt8195: Add dp-intf nodes
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings
arm64: dts: mt2712-evb: Fix usb vbus regulators unit names
arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
arm64: dts: mt2712e: Fix unit address for pinctrl node
arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
arm64: dts: mt6779: Fix devicetree build warnings
arm64: dts: mt7896a: Fix unit_address_vs_reg warning for oscillator
...
Link: https://lore.kernel.org/r/8933d687-71f0-e9ad-a7c6-2e5a8993463d@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.2-rc1
This contains many new additions, primarily for Tegra234, as well as a
slew of cleanups for issues flagged by the DT validation tools.
* tag 'tegra-for-6.2-arm64-dt-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits)
arm64: tegra: Remove unneeded clock-names for Tegra132 PWM
arm64: tegra: Fix up compatible string for SDMMC1 on Tegra234
arm64: tegra: Remove unused reset-names for QSPI
arm64: tegra: Fixup pinmux node names
arm64: tegra: Remove reset-names for QSPI
arm64: tegra: Use correct compatible string for Tegra234 HDA
arm64: tegra: Use correct compatible string for Tegra194 HDA
arm64: tegra: Use vbus-gpios property
arm64: tegra: Restructure Tegra210 PMC pinmux nodes
arm64: tegra: Update cache properties
arm64: tegra: Remove 'enable-active-low'
arm64: tegra: Add dma-channel-mask in GPCDMA node
arm64: tegra: Fix non-prefetchable aperture of PCIe C3 controller
arm64: tegra: Add missing compatible string to Ethernet USB device
arm64: tegra: Separate AON pinmux from main pinmux on Tegra194
arm64: tegra: Add ECAM aperture info for all the PCIe controllers
arm64: tegra: Remove clock-names from PWM nodes
arm64: tegra: Enable GTE nodes
arm64: tegra: Update console for Jetson Xavier and Orin
arm64: tegra: Enable PWM users on Jetson AGX Orin
...
Link: https://lore.kernel.org/r/20221121171239.2041835-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.2-rc1
New memory client IDs and IOMMU stream IDs, as well as new compatible
strings are introduced to support more hardware on Tegra234. Some device
tree bindings are converted to json-schema to allow formal validation.
* tag 'tegra-for-6.2-dt-bindings-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: usb: tegra-xusb: Convert to json-schema
dt-bindings: pwm: tegra: Convert to json-schema
dt-bindings: pinctrl: tegra194: Separate instances
dt-bindings: pinctrl: tegra: Convert to json-schema
dt-bindings: PCI: tegra234: Add ECAM support
dt-bindings: pwm: tegra: Document Tegra234 PWM
dt-bindings: Add bindings for Tegra234 NVDEC
dt-bindings: tegra: Update headers for Tegra234
dt-bindings: Add headers for NVDEC on Tegra234
Link: https://lore.kernel.org/r/20221121171239.2041835-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA dts updates for v6.2
- Use the "clk-phase-sd-hs" property for SDMMC
- Remove the "clk-phase" fom the sdmmc_clk that is no longer used
- Clean dtschema for mmc node
- Increase NAND partition for Arria10
* tag 'socfpga_dts_updates_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
arm: dts: socfpga: Add clk-phase-sd-hs property to the sdmmc node
arm: dts: socfpga: remove "clk-phase" in sdmmc_clk
arm: dts: socfpga: align mmc node names with dtschema
ARM: dts: socfpga: arria10: Increase NAND boot partition size
Link: https://lore.kernel.org/r/20221121163259.341974-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V DeviceTrees for v6.2
dt-bindings:
- new compatibles to support the StarFive VisionFive & thead CPU cores
- a fix for the PolarFire SoC's pwm binding, merged through my tree as
suggested by the PWM maintainers
Microchip:
- Non-urgent fix for the node address not matches the reg in a way that
the checkers don't complain about
- Add GPIO controlled LEDs for Icicle
- Support for the "CCC" clocks in the FPGA fabric. Previously these
used fixed-frequency clocks in the dt, but if which CCC is in use is
known, as in the v2022.09 Icicle Kit Reference Design, the rates can
be read dynamically. It's an "is known" as it *can* be set via
constraints in the FPGA tooling but does not have to be.
- A fix for the Icicle's pwm-cells
- Removal of some unused PCI clocks
StarFive:
- Addition of the VisionFive DT, which has been a long time coming!
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.2-mw0' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
dt-bindings: riscv: Add T-HEAD C906 and C910 compatibles
riscv: dts: microchip: remove unused pcie clocks
riscv: dts: microchip: remove pcie node from the sev kit
riscv: dts: microchip: fix the icicle's #pwm-cells
dt-bindings: pwm: fix microchip corePWM's pwm-cells
riscv: dts: starfive: Add StarFive VisionFive V1 device tree
riscv: dts: starfive: Add common DT for JH7100 based boards
dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
riscv: dts: microchip: fix memory node unit address for icicle
riscv: dts: microchip: icicle: Add GPIO controlled LEDs
riscv: dts: microchip: add the mpfs' fabric clock control
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds spi support for MT7986.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221118190126.100895-7-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
Move the wed_pcie node to have node aligned by address.
Fixes: 00b9903996b3 ("arm64: dts: mediatek: mt7986: add support for Wireless Ethernet Dispatch")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221118190126.100895-2-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas ARM DT updates for v6.2 (take two)
- Timer (TMU and CMT) and quad Cortex-A76 CPU topology support for
the R-Car V4H SoC,
- Watchdog, L2 cache, and system controller support for the RZ/V2M
SoC on the RZ/V2M Evaluation Kit 2.0,
- Ethernet Switch and SERDES supports for the R-Car S4-8 SoC and the
Spider development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v6.2-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (21 commits)
arm64: dts: renesas: spider-ethernet: Enable Ethernet Switch and SERDES
arm64: dts: renesas: r8a779f0: Add Ethernet Switch and SERDES nodes
arm64: dts: renesas: r9a09g011: Add system controller node
arm64: dts: renesas: r8a779g0: Add CA76 operating points
arm64: dts: renesas: r8a779g0: Add CPU core clocks
arm64: dts: renesas: r8a779g0: Add CPUIdle support
arm64: dts: renesas: r8a779g0: Add secondary CA76 CPU cores
arm64: dts: renesas: r8a779g0: Add L3 cache controller
arm64: dts: renesas: r9a09g011: Add L2 Cache node
arm64: dts: renesas: rzv2mevk2: Enable watchdog
arm64: dts: renesas: r9a09g011: Add watchdog node
arm64: dts: renesas: spider-cpu: Switch from SCIF3 to HSCIF0
arm64: dts: renesas: rzg2l: Drop #address-cells from pinctrl nodes
arm64: dts: renesas: r9a09g011: Fix I2C SoC specific strings
arm64: dts: renesas: rzg2l: Add missing cache-level properties
arm64: dts: renesas: r8a779g0: Add CMT node
arm64: dts: renesas: r9a09g011: Fix unit address format error
arm64: dts: renesas: white-hawk-cpu: Sort RWDT entry correctly
arm64: dts: renesas: r8a779g0: Add TMU nodes
arm64: dts: renesas: r8a779f0: Fix SCIF "brg_int" clock
...
Link: https://lore.kernel.org/r/cover.1668788921.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas RISC-V DT updates for v6.2
- Add initial support for the Renesas RZ/Five SoC and the Renesas
RZ/Five SMARC EVK development board.
* tag 'renesas-riscv-dt-for-v6.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
riscv: dts: renesas: rzfive-smarc: Enable CANFD/I2C
riscv: dts: renesas: r9a07g043f/rzfive-smarc-som: Enable ADC/OPP/Thermal Zones/TSU
MAINTAINERS: Add entry for Renesas RISC-V
riscv: dts: renesas: Add minimal DTS for Renesas RZ/Five SMARC EVK
riscv: dts: renesas: Add initial devicetree for Renesas RZ/Five SoC
Link: https://lore.kernel.org/r/cover.1668788930.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.2 (take two)
- Document support for the Andes Technology AX45MP RISC-V CPU Core, as
used on the Renesas RZ/Five SoC,
- Document support for the Renesas RZ/V2M System Configuration.
* tag 'renesas-dt-bindings-for-v6.2-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas RZ/V2M System Configuration
dt-bindings: riscv: Add Andes AX45MP core to the list
dt-bindings: riscv: Sort the CPU core list alphabetically
Link: https://lore.kernel.org/r/cover.1668788927.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.2, round 1
Highlights:
----------
- MPU:
- ST boards:
- Add MCP23017 IO expander support on stm32mp135f-dk board.
- Add stm32g0 support for USB typeC on stm32mp135f-dk
- Add USB (EHCI / OTG) on stm32mp135f-dk
- Add ADC support on stm32mp135f-dk
- Add USB2514B onboard hub on stm32mp157c-ev1
- DH:
- Fix severals Yaml DT validation issues
* tag 'stm32-dt-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (28 commits)
ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench board
ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk
ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13
ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk
ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13
ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk
ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk
ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk
ARM: dts: stm32: add USB OTG HS support on stm32mp131
ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131
ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131
ARM: dts: stm32: add PWR fixed regulators on stm32mp131
ARM: dts: stm32: Fix AV96 WLAN regulator gpio property
ARM: dts: stm32: add adc support on stm32mp135f-dk
ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk
ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk
ARM: dts: stm32: add adc support to stm32mp13
ARM: dts: stm32: Drop MMCI interrupt-names
ARM: dts: stm32: update vbus-supply of usbphyc_port0 on stm32mp157c-ev1
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp157c-ev1
...
Link: https://lore.kernel.org/r/3235e5be-d89f-f76c-5e25-5d1210feb857@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
ARM64: DT: HiSilicon ARM64 DT updates for 6.2
- Add missing cache-level properties
* tag 'hisi-arm64-dt-for-6.2' of https://github.com/hisilicon/linux-hisi:
arm64: dts: Update cache properties for hisilicon
Link: https://lore.kernel.org/r/63744D38.9010700@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree update for 6.2:
- New device trees for i.MX8MM based Cloos PHG and WB15 SoM/EVK.
- A set of tqma8mpql/mba8mpxl changes, adding USB Host, PCIe, PWM fan
support.
- Rename DTB overlay source files from .dts to .dtso.
- A series from Frank Li to add USB, ADC, FlexSPI, LPSPI support for
i.MX8DXL.
- A couple of librem5-devkit changes, switching LED to use PWM and using
function and color properties for LED.
- Enable wakeup-source for USB PHY for i.MX8MM/N EVK.
- A set of random changes from Marcel Ziswiler to improve i.MX8M based
Verdin device trees.
- A series from Marek Vasut to update Data Modul i.MX8M Mini eDM SBC and
DH electronics i.MX8M Plus DHCOM, modeling PMIC to SNVS RTC clock
path, dropping QCA clk_out setup, adding bluetooth UART, etc.
- A bunch of changes from Peng Fan to add LPSPI, TPM etc for i.MX93,
update i.MX8MP/N EVK with UART, I2C addition.
- Update cache properties per DeviceTree Specification v0.3.
- Add gpio-ranges property for i.MX8DXL and i.MX8Q LSIO Subsystem.
- Misc small and random changes.
* tag 'imx-dt64-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (60 commits)
arm64: dts: freescale: Rename DTB overlay source files from .dts to .dtso
arm64: dts: imx8mm-evk: add vcc supply for pca6416
arm64: dts: imx8m[m,q]-evk: change to use off-on-delay-us in regulator
arm64: dts: imx8mn-evk: enable uart1
arm64: dts: imx8mn-evk: add i2c gpio recovery settings
arm64: dts: imx8mn-evk: set off-on-delay-us in regulator
arm64: dts: imx8mn-evk: update vdd_soc dvs voltage
arm64: dts: imx8mp-evk: enable I2C2 node
arm64: dts: imx8mp-evk: enable fspi nor on imx8mp evk
arm64: dts: imx8mp-evk: enable uart1/3 ports
ARM64: dts: imx8mp-evk: add pwm support
arm64: dts: imx8mp: add mlmix power domain
arm64: dts: imx8mq: fix dtschema warning for imx7-csi
arm64: dts: Update cache properties for freescale
arm64: dts: imx8mm-phg: Add initial board support
arm64: dts: imx8qxp-ss-lsio: add gpio-ranges property
arm64: dts: imx8qm-ss-lsio: add gpio-ranges property
arm64: dts: imx8dxl-ss-lsio: add gpio-ranges property
arm64: dts: imx8dxl_evk: add lpspi0 support
arm64: dts: imx8dxl: add lpspi support
...
Link: https://lore.kernel.org/r/20221119125733.32719-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm device tree update for 6.2:
- New device tree for Kobo Aura 2 E-Boot reader which is built on i.MX6SL
SoC.
- Enable backlight and boost support for imx6sl-tolino-shine2hd.
- Enable CYTTSP5 touchscreen support for E60K02.
- Enable Silergy SY7636A EPD PMIC on imx7d-remarkable2 epaper tablet.
- Add watchdog property 'fsl,suspend-in-wait' for i.MX6UL Phytec Phycore
SoM to avoid watchdog triggering in 'freeze' low power mode.
- Correct the polarity of AT86RF233 reset line for vf610-zii-dev-rev-c
board.
- A bunch of Colibri device tree updates from Marcel Ziswiler and Philippe
Schenker, correct USBH_PEN property, remove spurious debounce property,
add USB dual-role switching, and some cosmetic change.
- Other small and random changes.
* tag 'imx-dt-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: colibri-imx6ull: Enable dual-role switching
ARM: dts: imx: e60k02: Add touchscreen
ARM: dts: imx6qdl-sabre: Add mmc aliases
ARM: dts: imx6ul/ull: suspend i.MX6UL watchdog in wait mode
ARM: dts: imx7d-remarkable2: Enable silergy,sy7636a
ARM: dts: imx6sl-tolino-shine2hd: Add backlight boost
ARM: dts: imx6sl-tolino-shine2hd: Add backlight
ARM: dts: colibri-imx7: fix confusing naming
ARM: dts: colibri-imx6ull: add -hog to gpio hogs
ARM: dts: colibri-imx6ull: enable default peripherals
ARM: dts: colibri-imx6ull: keep peripherals disabled
ARM: dts: ls1021: correct indentation
ARM: dts: vf610-zii-dev-rev-c: fix polarity of at86rf233 reset line
ARM: dts: imx7-colibri: remove spurious debounce property
ARM: dts: colibri-imx6: specify usbh_pen gpio being active-low
ARM: dts: colibri-imx6: move vbus-supply to module level device tree
ARM: dts: colibri-imx6: usb dual-role switching
ARM: dts: imx: Add devicetree for Kobo Aura 2
Link: https://lore.kernel.org/r/20221119125733.32719-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.2:
- New vendor prefix for Cloos and InnoComm.
- New compatible for Cloos PHG board, InnoComm WB15 EVK and Kobo Aura 2.
- Improve snvs-lpgpr bindings schema regarding i.MX8M SNVS LPGRP
compatible strings.
- Improve fsl-imx-cspi bindings schema for i.MX8MP ECSPI.
- Add bindings schema for i.MX8M ANATOP device.
- Update SCU firmware resource ID header by syncing with the latest
available SCFW kit version 1.13.0.
* tag 'imx-bindings-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add an entry for Cloos PHG board
dt-bindings: vendor-prefixes: Add an entry for Cloos
dt-bindings: nvmem: snvs-lpgpr: Fix i.MX8M compatible strings
dt-bindings: spi: fsl-imx-cspi: update i.MX8MP binding
dt-bindings: arm: fsl: add compatible string for Kobo Aura 2
dt-bindings: clock: add i.MX8M Anatop
dt-bindings: arm: fsl: Add InnoComm WB15 EVK
dt-bindings: vendor-prefixes: Add prefix for InnoComm
dt-bindings: firmware: imx: sync with SCFW kit v1.13.0
Link: https://lore.kernel.org/r/20221119125733.32719-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There's only a single clock for this IP block, so it doesn't need a
clock-names property.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The compatible string list for SDHCI on Tegra234 should be
"nvidia,tegra234-sdhci", followed by the "nvidia,tegra186-sdhci"
fallback. Use that consistently for all SDHCI controllers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra QSPI controller uses a single reset line, so there's no need
for a reset-names property. Remove such properties.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Pinmux node names should have a pinmux- prefix and not use underscores.
Fix up some cases that didn't follow those rules.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra QSPI controllers use a single reset control, so reset-names is
not necessary and therefore not specified in the DT bindings. Drop the
property from device tree files to avoid validation warnings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra234 HDA controller is not backwards-compatible with Tegra30, so
drop the corresponding compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra194 HDA controller is not backwards-compatible with Tegra30, so
drop the corresponding compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Instead of using the deprecated vbus-gpio property, switch to using the
more standard vbus-gpios property.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The PMC pinmux configuration nodes need to be part of a top-level pinmux
node. Add that new "pinmux" node and move the configuration nodes into
it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add dma-channel-mask property in Tegra GPCDMA device tree node.
The property would help to specify the channels to be used in
kernel and reserve few for the firmware. This was previously
achieved by limiting the channel number to 31 in the driver.
This is wrong and does not align with the hardware. Correct this
and update the interrupts property to list all 32 interrupts.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Fix the starting address of the non-prefetchable aperture of PCIe C3
controller.
Fixes: ec142c44b026 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
According to the DT schema in usb-device.yaml, each USB device node
needs a compatible string, so add one for the built-in USB Ethernet
device on Jetson TX1.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The registers for the AON pinmux reside in a partition different from
the registers for the main pinmux. Instead of treating them as one and
the same device, split them up so that they are each their own devices.
Also add gpio-ranges properties to the corresponding GPIO controllers
such that the pinmux and GPIO controllers can be paired up properly.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add the ECAM aperture information for all the PCIe controllers of
Tegra234.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra PWFM controllers use a single clock, so there's no need for a
clock-names property.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add and enable AON and LIC GTE nodes by default.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The Tegra Combined UART (TCU) is the default serial interface for Jetson
Xavier and Orin platforms and so update the bootargs for these platforms
to use the TCU.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Enable additional PWM controllers in device tree so that the PWM pins on
the Jetson AGX Orin Developer Kit 40-pin header can be used.
Signed-off-by: Sandipan Patra <spatra@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The unit-address of a node should be separated from the opening brace by
a space.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The P2U nodes that were recently added were not added in the correct
order. Sort them in the right place by unit-address.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add device tree node for Tegra234 SDMMC1 instance.
Add and enable SD card instance in device tree.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Populate the SBSA UART for Tegra234 and enable this UART for Jetson AGX
Orin.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add the PWM fan node for the Tegra234 Jetson AGX Orin platform.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Populate all the PWM devices for Tegra234. Finally, update the
compatible string for the existing 'pwm1' node to just be 'tegra194-pwm'
and remove the fallback to 'tegra186-pwm', which aligns with the
binding documentation.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Commit 156af9de0932 ("arm64: tegra: Add Tegra234 I2C devicetree nodes")
populated the I2C device nodes for Tegra234. One of these nodes
contains the property 'nvidia,hw-instance-id' which is neither
documented or used. Remove this unused property.
Fixes: 156af9de0932 ("arm64: tegra: Add Tegra234 I2C devicetree nodes")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
commit edf408b946d3 ("PCI: dwc: Validate iATU outbound mappings against
hardware constraints") exposes an issue with the existing partitioning of
the aperture space where the Prefetchable apertures of controllers
C5, C7 and C9 in Tegra234 cross the 32GB boundary hardware constraint.
This patch makes sure that the Prefetchable region doesn't spill over
the 32GB boundary.
Fixes: ec142c44b026 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a device tree node for NVDEC on Tegra234.
Booting the firmware requires some information regarding offsets
within the firmware binary. These are passed through the device
tree, but since the values vary depending on the firmware version,
and the firmware itself is not available to the OS, the flasher is
expected to provide a device tree overlay with values corresponding
to the firmware it is flashing. The overlay then replaces the
placeholder values here.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The currently specified 'ranges' properties don't actually include
all devices under the host1x bus on Tegra194 and Tegra234. Expand
them appropriately.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
|
|
Convert the Tegra XUSB controller bindings from the free-form text
format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Convert the Tegra PWFM bindings from the free-form text format to
json-schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Tegra194 has two separate instances of the pin controller, one called
AON (in the always-on domain) and another called "main". Instead of
treating them as a single pin controller, split them up into two
separate controllers. Doing so allows the mapping between the pinmux and
GPIO controllers to be trivial identity mappings and more cleanly
separates the AON from the main IP blocks.
Note that while this changes the DT node in an incompatible way, this
doesn't have any practical implications for backwards-compatibility. The
reason for this is that device trees have only reconfigured a very
narrow subset of pins of the main controller, so the new driver will
remain backwards-compatible with old device trees.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Convert the NVIDIA Tegra pinmux controller bindings from the free-form
text format to json-schema.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
