summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-15net: bridge: xmit: make sure we have at least eth header len bytesNikolay Aleksandrov
syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a63a1f6a062033cf0f40@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a63a1f6a062033cf0f40 Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-14net: micrel: Fix receiving the timestamp in the frame for lan8841Horatiu Vultur
The blamed commit started to use the ptp workqueue to get the second part of the timestamp. And when the port was set down, then this workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING is not enabled, then the ptp_clock is not initialized so then it would crash when it would try to access the delayed work. So then basically by setting up and then down the port, it would crash. The fix consists in checking if the ptp_clock is initialized and only then cancel the delayed work. Fixes: cc7554954848 ("net: micrel: Change to receive timestamp in the frame for lan8841") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-13net: fec: remove .ndo_poll_controller to avoid deadlocksWei Fang
There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. Fixes: 7f5c6addcdc0 ("net/fec: add poll controller function for fec nic") Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20240511062009.652918-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13dpll: fix return value check for kmemdupChen Ni
The return value of kmemdup() is dst->freq_supported, not src->freq_supported. Update the check accordingly. Fixes: 830ead5fb0c5 ("dpll: fix pin dump crash for rebound module") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240513032824.2410459-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13Merge branch 'ax25-fix-issues-of-ax25_dev-and-net_device'Jakub Kicinski
Duoming Zhou says: ==================== ax25: Fix issues of ax25_dev and net_device The first patch uses kernel universal linked list to implement ax25_dev_list, which makes the operation of the list easier. The second and third patch fix reference count leak issues of the object "ax25_dev" and "net_device". ==================== Link: https://lore.kernel.org/r/cover.1715247018.git.duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13ax25: Fix reference count leak issue of net_deviceDuoming Zhou
There is a reference count leak issue of the object "net_device" in ax25_dev_device_down(). When the ax25 device is shutting down, the ax25_dev_device_down() drops the reference count of net_device one or zero times depending on if we goto unlock_put or not, which will cause memory leak. In order to solve the above issue, decrease the reference count of net_device after dev->ax25_ptr is set to null. Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/7ce3b23a40d9084657ba1125432f0ecc380cbc80.1715247018.git.duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13ax25: Fix reference count leak issues of ax25_devDuoming Zhou
The ax25_addr_ax25dev() and ax25_dev_device_down() exist a reference count leak issue of the object "ax25_dev". Memory leak issue in ax25_addr_ax25dev(): The reference count of the object "ax25_dev" can be increased multiple times in ax25_addr_ax25dev(). This will cause a memory leak. Memory leak issues in ax25_dev_device_down(): The reference count of ax25_dev is set to 1 in ax25_dev_device_up() and then increase the reference count when ax25_dev is added to ax25_dev_list. As a result, the reference count of ax25_dev is 2. But when the device is shutting down. The ax25_dev_device_down() drops the reference count once or twice depending on if we goto unlock_put or not, which will cause memory leak. As for the issue of ax25_addr_ax25dev(), it is impossible for one pointer to be on a list twice. So add a break in ax25_addr_ax25dev(). As for the issue of ax25_dev_device_down(), increase the reference count of ax25_dev once in ax25_dev_device_up() and decrease the reference count of ax25_dev after it is removed from the ax25_dev_list. Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/361bbf2a4b091e120006279ec3b382d73c4a0c17.1715247018.git.duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13ax25: Use kernel universal linked list to implement ax25_dev_listDuoming Zhou
The origin ax25_dev_list implements its own single linked list, which is complicated and error-prone. For example, when deleting the node of ax25_dev_list in ax25_dev_device_down(), we have to operate on the head node and other nodes separately. This patch uses kernel universal linked list to replace original ax25_dev_list, which make the operation of ax25_dev_list easier. We should do "dev->ax25_ptr = ax25_dev;" and "dev->ax25_ptr = NULL;" while holding the spinlock, otherwise the ax25_dev_device_up() and ax25_dev_device_down() could race. Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/85bba3af651ca0e1a519da8d0d715b949891171c.1715247018.git.duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13net: usb: ax88179_178a: fix link status when link is set to down/upJose Ignacio Tornos Martinez
The idea was to keep only one reset at initialization stage in order to reduce the total delay, or the reset from usbnet_probe or the reset from usbnet_open. I have seen that restarting from usbnet_probe is necessary to avoid doing too complex things. But when the link is set to down/up (for example to configure a different mac address) the link is not correctly recovered unless a reset is commanded from usbnet_open. So, detect the initialization stage (first call) to not reset from usbnet_open after the reset from usbnet_probe and after this stage, always reset from usbnet_open too (when the link needs to be rechecked). Apply to all the possible devices, the behavior now is going to be the same. cc: stable@vger.kernel.org # 6.6+ Fixes: 56f78615bcb1 ("net: usb: ax88179_178a: avoid writing the mac address before first reading") Reported-by: Isaac Ganoung <inventor500@vivaldi.net> Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240510090846.328201-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13net: smc91x: Fix m68k kernel compilation for ColdFire CPUThorsten Blum
Compiling the m68k kernel with support for the ColdFire CPU family fails with the following error: In file included from drivers/net/ethernet/smsc/smc91x.c:80: drivers/net/ethernet/smsc/smc91x.c: In function ‘smc_reset’: drivers/net/ethernet/smsc/smc91x.h:160:40: error: implicit declaration of function ‘_swapw’; did you mean ‘swap’? [-Werror=implicit-function-declaration] 160 | #define SMC_outw(lp, v, a, r) writew(_swapw(v), (a) + (r)) | ^~~~~~ drivers/net/ethernet/smsc/smc91x.h:904:25: note: in expansion of macro ‘SMC_outw’ 904 | SMC_outw(lp, x, ioaddr, BANK_SELECT); \ | ^~~~~~~~ drivers/net/ethernet/smsc/smc91x.c:250:9: note: in expansion of macro ‘SMC_SELECT_BANK’ 250 | SMC_SELECT_BANK(lp, 2); | ^~~~~~~~~~~~~~~ cc1: some warnings being treated as errors The function _swapw() was removed in commit d97cf70af097 ("m68k: use asm-generic/io.h for non-MMU io access functions"), but is still used in drivers/net/ethernet/smsc/smc91x.h. Use ioread16be() and iowrite16be() to resolve the error. Cc: stable@vger.kernel.org Fixes: d97cf70af097 ("m68k: use asm-generic/io.h for non-MMU io access functions") Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240510113054.186648-2-thorsten.blum@toblux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13netlabel: fix RCU annotation for IPv4 options on socket creationDavide Caratti
Xiumei reports the following splat when netlabel and TCP socket are used: ============================= WARNING: suspicious RCU usage 6.9.0-rc2+ #637 Not tainted ----------------------------- net/ipv4/cipso_ipv4.c:1880 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ncat/23333: #0: ffffffff906030c0 (rcu_read_lock){....}-{1:2}, at: netlbl_sock_setattr+0x25/0x1b0 stack backtrace: CPU: 11 PID: 23333 Comm: ncat Kdump: loaded Not tainted 6.9.0-rc2+ #637 Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013 Call Trace: <TASK> dump_stack_lvl+0xa9/0xc0 lockdep_rcu_suspicious+0x117/0x190 cipso_v4_sock_setattr+0x1ab/0x1b0 netlbl_sock_setattr+0x13e/0x1b0 selinux_netlbl_socket_post_create+0x3f/0x80 selinux_socket_post_create+0x1a0/0x460 security_socket_post_create+0x42/0x60 __sock_create+0x342/0x3a0 __sys_socket_create.part.22+0x42/0x70 __sys_socket+0x37/0xb0 __x64_sys_socket+0x16/0x20 do_syscall_64+0x96/0x180 ? do_user_addr_fault+0x68d/0xa30 ? exc_page_fault+0x171/0x280 ? asm_exc_page_fault+0x22/0x30 entry_SYSCALL_64_after_hwframe+0x71/0x79 RIP: 0033:0x7fbc0ca3fc1b Code: 73 01 c3 48 8b 0d 05 f2 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 29 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d d5 f1 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff18635208 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fbc0ca3fc1b RDX: 0000000000000006 RSI: 0000000000000001 RDI: 0000000000000002 RBP: 000055d24f80f8a0 R08: 0000000000000003 R09: 0000000000000001 R10: 0000000000020000 R11: 0000000000000246 R12: 000055d24f80f8a0 R13: 0000000000000000 R14: 000055d24f80fb88 R15: 0000000000000000 </TASK> The current implementation of cipso_v4_sock_setattr() replaces IP options under the assumption that the caller holds the socket lock; however, such assumption is not true, nor needed, in selinux_socket_post_create() hook. Let all callers of cipso_v4_sock_setattr() specify the "socket lock held" condition, except selinux_socket_post_create() _ where such condition can safely be set as true even without holding the socket lock. Fixes: f6d8bd051c39 ("inet: add RCU protection to inet->opt") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/f4260d000a3a55b9e8b6a3b4e3fffc7da9f82d41.1715359817.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13inet: fix inet_fill_ifaddr() flags truncationEric Dumazet
I missed that (struct ifaddrmsg)->ifa_flags was only 8bits, while (struct in_ifaddr)->ifa_flags is 32bits. Use a temporary 32bit variable as I did in set_ifa_lifetime() and check_lifetime(). Fixes: 3ddc2231c810 ("inet: annotate data-races around ifa->ifa_flags") Reported-by: Yu Watanabe <watanabe.yu@gmail.com> Dianosed-by: Yu Watanabe <watanabe.yu@gmail.com> Closes: https://github.com/systemd/systemd/pull/32666#issuecomment-2103977928 Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240510072932.2678952-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-05-13 We've added 3 non-merge commits during the last 2 day(s) which contain a total of 2 files changed, 62 insertions(+), 8 deletions(-). The main changes are: 1) Fix a case where syzkaller found that it's unexpectedly possible to attach a cgroup_skb program to the sockopt hooks. The fix adds missing attach_type enforcement for the link_create case along with selftests, from Stanislav Fomichev. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add sockopt case to verify prog_type selftests/bpf: Extend sockopt tests to use BPF_LINK_CREATE bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE ==================== Link: https://lore.kernel.org/r/20240513041845.31040-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10Merge branch 'mlx5-misc-fixes'Jakub Kicinski
Tariq Toukan says: ==================== mlx5 misc fixes This patchset provides bug fixes to mlx5 driver. Patch 1 by Shay fixes the error flow in mlx5e_suspend(). Patch 2 by Shay aligns the peer devlink set logic with the register devlink flow. Patch 3 by Maher solves a deadlock in lag enable/disable. Patches 4 and 5 by Akiva address issues in command interface corner cases. Series generated against: commit 393ceeb9211e ("Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'") ==================== Link: https://lore.kernel.org/r/20240509112951.590184-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net/mlx5: Discard command completions in internal errorAkiva Goldberger
Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 Fixes: 51d138c2610a ("net/mlx5: Fix health error state handling") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240509112951.590184-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net/mlx5: Add a timeout to acquire the command queue semaphoreAkiva Goldberger
Prevent forced completion handling on an entry that has not yet been assigned an index, causing an out of bounds access on idx = -22. Instead of waiting indefinitely for the sem, blocking flow now waits for index to be allocated or a sem acquisition timeout before beginning the timer for FW completion. Kernel log example: mlx5_core 0000:06:00.0: wait_func_handle_exec_timeout:1128:(pid 185911): cmd[-22]: CREATE_UCTX(0xa04) No done completion Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240509112951.590184-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net/mlx5: Reload only IB representors upon lag disable/enableMaher Sanalla
On lag disable, the bond IB device along with all of its representors are destroyed, and then the slaves' representors get reloaded. In case the slave IB representor load fails, the eswitch error flow unloads all representors, including ethernet representors, where the netdevs get detached and removed from lag bond. Such flow is inaccurate as the lag driver is not responsible for loading/unloading ethernet representors. Furthermore, the flow described above begins by holding lag lock to prevent bond changes during disable flow. However, when reaching the ethernet representors detachment from lag, the lag lock is required again, triggering the following deadlock: Call trace: __switch_to+0xf4/0x148 __schedule+0x2c8/0x7d0 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x28 __mutex_lock.isra.13+0x2b8/0x570 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x4c/0x68 mlx5_lag_remove_netdev+0x3c/0x1a0 [mlx5_core] mlx5e_uplink_rep_disable+0x70/0xa0 [mlx5_core] mlx5e_detach_netdev+0x6c/0xb0 [mlx5_core] mlx5e_netdev_change_profile+0x44/0x138 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x28/0x38 [mlx5_core] mlx5e_vport_rep_unload+0x184/0x1b8 [mlx5_core] mlx5_esw_offloads_rep_load+0xd8/0xe0 [mlx5_core] mlx5_eswitch_reload_reps+0x74/0xd0 [mlx5_core] mlx5_disable_lag+0x130/0x138 [mlx5_core] mlx5_lag_disable_change+0x6c/0x70 [mlx5_core] // hold ldev->lock mlx5_devlink_eswitch_mode_set+0xc0/0x410 [mlx5_core] devlink_nl_cmd_eswitch_set_doit+0xdc/0x180 genl_family_rcv_msg_doit.isra.17+0xe8/0x138 genl_rcv_msg+0xe4/0x220 netlink_rcv_skb+0x44/0x108 genl_rcv+0x40/0x58 netlink_unicast+0x198/0x268 netlink_sendmsg+0x1d4/0x418 sock_sendmsg+0x54/0x60 __sys_sendto+0xf4/0x120 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x8c/0x120 do_el0_svc+0x30/0xa0 el0_svc+0x20/0x30 el0_sync_handler+0x90/0xb8 el0_sync+0x160/0x180 Thus, upon lag enable/disable, load and unload only the IB representors of the slaves preventing the deadlock mentioned above. While at it, refactor the mlx5_esw_offloads_rep_load() function to have a static helper method for its internal logic, in symmetry with the representor unload design. Fixes: 598fe77df855 ("net/mlx5: Lag, Create shared FDB when in switchdev mode") Co-developed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509112951.590184-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net/mlx5: Fix peer devlink set for SF representor devlink portShay Drory
The cited patch change register devlink flow, and neglect to reflect the changes for peer devlink set logic. Peer devlink set is triggering a call trace if done after devl_register.[1] Hence, align peer devlink set logic with register devlink flow. [1] WARNING: CPU: 4 PID: 3394 at net/devlink/core.c:155 devlink_rel_nested_in_add+0x177/0x180 CPU: 4 PID: 3394 Comm: kworker/u40:1 Not tainted 6.9.0-rc4_for_linust_min_debug_2024_04_16_14_08 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_vhca_event0 mlx5_vhca_state_work_handler [mlx5_core] RIP: 0010:devlink_rel_nested_in_add+0x177/0x180 Call Trace: <TASK> ? __warn+0x78/0x120 ? devlink_rel_nested_in_add+0x177/0x180 ? report_bug+0x16d/0x180 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_port_init+0x30/0x30 ? devlink_port_type_clear+0x50/0x50 ? devlink_rel_nested_in_add+0x177/0x180 ? devlink_rel_nested_in_add+0xdd/0x180 mlx5_sf_mdev_event+0x74/0xb0 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_sf_dev_probe+0x185/0x3e0 [mlx5_core] auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc5/0x3a0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x64f/0x860 __auxiliary_device_add+0x3b/0xa0 mlx5_sf_dev_add+0x139/0x330 [mlx5_core] mlx5_sf_dev_state_change_handler+0x1e4/0x250 [mlx5_core] notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core] process_one_work+0x13f/0x2e0 worker_thread+0x2bd/0x3c0 ? rescuer_thread+0x410/0x410 kthread+0xc4/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: bf729988303a ("net/mlx5: Restore mistakenly dropped parts in register devlink flow") Fixes: c6e77aa9dd82 ("net/mlx5: Register devlink first under devlink lock") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509112951.590184-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net/mlx5e: Fix netif state handlingShay Drory
mlx5e_suspend cleans resources only if netif_device_present() returns true. However, mlx5e_resume changes the state of netif, via mlx5e_nic_enable, only if reg_state == NETREG_REGISTERED. In the below case, the above leads to NULL-ptr Oops[1] and memory leaks: mlx5e_probe _mlx5e_resume mlx5e_attach_netdev mlx5e_nic_enable <-- netdev not reg, not calling netif_device_attach() register_netdev <-- failed for some reason. ERROR_FLOW: _mlx5e_suspend <-- netif_device_present return false, resources aren't freed :( Hence, clean resources in this case as well. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP CPU: 2 PID: 9345 Comm: test-ovs-ct-gen Not tainted 6.5.0_for_upstream_min_debug_2023_09_05_16_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at0xffffffffffffffd6. RSP: 0018:ffff888178aaf758 EFLAGS: 00010246 Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x14c/0x3c0 ? exc_page_fault+0x75/0x140 ? asm_exc_page_fault+0x22/0x30 notifier_call_chain+0x35/0xb0 blocking_notifier_call_chain+0x3d/0x60 mlx5_blocking_notifier_call_chain+0x22/0x30 [mlx5_core] mlx5_core_uplink_netdev_event_replay+0x3e/0x60 [mlx5_core] mlx5_mdev_netdev_track+0x53/0x60 [mlx5_ib] mlx5_ib_roce_init+0xc3/0x340 [mlx5_ib] __mlx5_ib_add+0x34/0xd0 [mlx5_ib] mlx5r_probe+0xe1/0x210 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x38/0x80 ? driver_sysfs_add+0x51/0x80 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 bus_probe_device+0x86/0xa0 device_add+0x637/0x840 __auxiliary_device_add+0x3b/0xa0 add_adev+0xc9/0x140 [mlx5_core] mlx5_rescan_drivers_locked+0x22a/0x310 [mlx5_core] mlx5_register_device+0x53/0xa0 [mlx5_core] mlx5_init_one_devl_locked+0x5c4/0x9c0 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x44c/0x730 [mlx5_core] local_pci_probe+0x3e/0x90 pci_device_probe+0xbf/0x210 ? kernfs_create_link+0x5d/0xa0 ? sysfs_do_create_link_sd+0x60/0xc0 really_probe+0xc9/0x3e0 ? driver_probe_device+0x90/0x90 __driver_probe_device+0x80/0x160 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 bus_for_each_drv+0x80/0xd0 __device_attach+0xbc/0x1f0 pci_bus_add_device+0x54/0x80 pci_iov_add_virtfn+0x2e6/0x320 sriov_enable+0x208/0x420 mlx5_core_sriov_configure+0x9e/0x200 [mlx5_core] sriov_numvfs_store+0xae/0x1a0 kernfs_fop_write_iter+0x10c/0x1a0 vfs_write+0x291/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 CR2: 0000000000000000 ---[ end trace 0000000000000000 ]--- Fixes: 2c3b5beec46a ("net/mlx5e: More generic netdev management API") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509112951.590184-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10Merge branch 'ipv6-sr-fix-errors-during-unregister'Jakub Kicinski
Hangbin Liu says: ==================== ipv6: sr: fix errors during unregister Fix some errors in seg6 unregister path, like missing unregister functions, incorrect unregister order, etc. ==================== Link: https://lore.kernel.org/r/20240509131812.1662197-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10ipv6: sr: fix invalid unregister error pathHangbin Liu
The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL is not defined. In that case if seg6_hmac_init() fails, the genl_unregister_family() isn't called. This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") replaced unregister_pernet_subsys() with genl_unregister_family() in this error path. Fixes: 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support") Reported-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240509131812.1662197-4-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10ipv6: sr: fix incorrect unregister orderHangbin Liu
Commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") changed the register order in seg6_init(). But the unregister order in seg6_exit() is not updated. Fixes: 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240509131812.1662197-3-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10ipv6: sr: add missing seg6_local_exitHangbin Liu
Currently, we only call seg6_local_exit() in seg6_init() if seg6_local_init() failed. But forgot to call it in seg6_exit(). Fixes: d1df6fd8a1d2 ("ipv6: sr: define core operations for seg6local lightweight tunnel") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240509131812.1662197-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net: openvswitch: fix overwriting ct original tuple for ICMPv6Ilya Maximets
OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the ICMPv6 header, it first zeroes out fields in the key corresponding to Neighbor Discovery information even if it is not an ND packet. It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares the space between 'nd' and 'ct_orig' that holds the original tuple conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. ND packets should not normally have conntrack state, so it's fine to share the space, but normal ICMPv6 Echo packets or maybe other types of ICMPv6 can have the state attached and it should not be overwritten. The issue results in all but the last 4 bytes of the destination address being wiped from the original conntrack tuple leading to incorrect packet matching and potentially executing wrong actions in case this packet recirculates within the datapath or goes back to userspace. ND fields should not be accessed in non-ND packets, so not clearing them should be fine. Executing memset() only for actual ND packets to avoid the issue. Initializing the whole thing before parsing is needed because ND packet may not contain all the options. The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't affect packets entering OVS datapath from network interfaces, because in this case CT metadata is populated from skb after the packet is already parsed. Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") Reported-by: Antonin Bas <antonin.bas@broadcom.com> Closes: https://github.com/openvswitch/ovs-issues/issues/327 Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20240509094228.1035477-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10af_unix: Fix data races in unix_release_sock/unix_stream_sendmsgBreno Leitao
A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in Link: https://lore.kernel.org/all/20240508173324.53565-1-kuniyu@amazon.com/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240509081459.2807828-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net: ethernet: cortina: Locking fixesLinus Walleij
This fixes a probably long standing problem in the Cortina Gemini ethernet driver: there are some paths in the code where the IRQ registers are written without taking the proper locks. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509-gemini-ethernet-locking-v1-1-afd00a528b95@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10ice: Fix package download algorithmDan Nowlin
Previously, the driver assumed that all signature segments would contain one or more buffers to download. In the future, there will be signature segments that will contain no buffers to download. Correct download flow to allow for signature segments that have zero download buffers and skip the download in this case. Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240508171908.2760776-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net: ethernet: mediatek: use ADMAv1 instead of ADMAv2.0 on MT7981 and MT7986Daniel Golle
ADMAv2.0 is plagued by RX hangs which can't easily detected and happen upon receival of a corrupted Ethernet frame. Use ADMAv1 instead which is also still present and usable, and doesn't suffer from that problem. Fixes: 197c9e9b17b1 ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset") Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/57cef74bbd0c243366ad1ff4221e3f72f437ec80.1715164770.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net: ethernet: mediatek: split tx and rx fields in mtk_soc_data structLorenzo Bianconi
Split tx and rx fields in mtk_soc_data struct. This is a preliminary patch to roll back to ADMAv1 for MT7986 and MT7981 SoC in order to fix a hw hang if the device receives a corrupted packet when using ADMAv2.0. Fixes: 197c9e9b17b1 ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/70a799b1f060ec2f57883e88ccb420ac0fb0abb5.1715164770.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10selftests: net: move amt to socat for better compatibilityJakub Kicinski
The test seems to expect that nc will exit after the first received message. This is not the case with Ncat 7.94. There are multiple versions of nc out there, switch to socat for better compatibility. Tell socat to exit after 128 bytes and pad the message. Since the test sets -e make sure we don't set exit code (|| true) and print the pass / fail rather then silently moving over the test and just setting non-zero exit code with no output indicating what failed. Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Acked-by: Paolo Abeni<pabeni@redhat.com> Tested-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20240509161952.3940476-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10selftests: net: add missing config for amt.shJakub Kicinski
Test needs IPv6 multicast. smcroute currently crashes when trying to install a route in a kernel without IPv6 multicast. Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Link: https://lore.kernel.org/r/20240509161919.3939966-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10eth: sungem: remove .ndo_poll_controller to avoid deadlocksJakub Kicinski
Erhard reports netpoll warnings from sungem: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398) WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c gem_poll_controller() disables interrupts, which may sleep. We can't sleep in netpoll, it has interrupts disabled completely. Strangely, gem_poll_controller() doesn't even poll the completions, and instead acts as if an interrupt has fired so it just schedules NAPI and exits. None of this has been necessary for years, since netpoll invokes NAPI directly. Fixes: fe09bb619096 ("sungem: Spring cleaning and GRO support") Reported-and-tested-by: Erhard Furtner <erhard_f@mailbox.org> Link: https://lore.kernel.org/all/20240428125306.2c3080ef@legion Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240508134504.3560956-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-09ptp: ocp: fix DPLL functionsVadim Fedorenko
In ptp_ocp driver pin actions assume sma_nr starts with 1, but for DPLL subsystem callback 0-based index was used. Fix it providing proper index. Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops") Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20240508132111.11545-1-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-09Merge tag 'net-6.9-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and IPsec. The bridge patch is actually a follow-up to a recent fix in the same area. We have a pending v6.8 AF_UNIX regression; it should be solved soon, but not in time for this PR. Current release - regressions: - eth: ks8851: Queue RX packets in IRQ handler instead of disabling BHs - net: bridge: fix corrupted ethernet header on multicast-to-unicast Current release - new code bugs: - xfrm: fix possible bad pointer derferencing in error path Previous releases - regressionis: - core: fix out-of-bounds access in ops_init - ipv6: - fix potential uninit-value access in __ip6_make_skb() - fib6_rules: avoid possible NULL dereference in fib6_rule_action() - tcp: use refcount_inc_not_zero() in tcp_twsk_unique(). - rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation - rxrpc: fix congestion control algorithm - bluetooth: - l2cap: fix slab-use-after-free in l2cap_connect() - msft: fix slab-use-after-free in msft_do_close() - eth: hns3: fix kernel crash when devlink reload during initialization - eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family Previous releases - always broken: - xfrm: preserve vlan tags for transport mode software GRO - tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets - eth: hns3: keep using user config after hardware reset" * tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family net: hns3: fix kernel crash when devlink reload during initialization net: hns3: fix port vlan filter not disabled issue net: hns3: use appropriate barrier function after setting a bit value net: hns3: release PTP resources if pf initialization failed net: hns3: change type of numa_node_mask as nodemask_t net: hns3: direct return when receive a unknown mailbox message net: hns3: using user configure after hardware reset net/smc: fix neighbour and rtable leak in smc_ib_find_route() ipv6: prevent NULL dereference in ip6_output() hsr: Simplify code for announcing HSR nodes timer setup ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action() dt-bindings: net: mediatek: remove wrongly added clocks and SerDes rxrpc: Only transmit one ACK per jumbo packet received rxrpc: Fix congestion control algorithm selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC ipv6: Fix potential uninit-value access in __ip6_make_skb() net: phy: marvell-88q2xxx: add support for Rev B1 and B2 appletalk: Improve handling of broadcast packets ...
2024-05-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linuxLinus Torvalds
Pull ARM fix from Russell King: - clear stale KASan stack poison when a CPU resumes * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: ARM: 9381/1: kasan: clear stale stack poison
2024-05-09Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull dentry leak fix from Al Viro: "Dentry leak fix in the qibfs driver that I forgot to send a pull request for ;-/ My apologies - it actually sat in vfs.git#fixes for more than two months..." * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qibfs: fix dentry leak
2024-05-09net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only portsSteffen Bätz
On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports. Modified the mv88e6352_get_port4_serdes_cmode function to pass a port number since the register set of the 6352 is equal on the 6320/21. Signed-off-by: Steffen Bätz <steffen@innosonix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 familySteffen Bätz
As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6320/21 switches fail to be probed: ... mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces error creating PHYLINK: -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Since there are serdes only ports 0/1 included, create a new dedicated phylink_get_caps for the 6320 and 6321 to properly support their set of capabilities. Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Steffen Bätz <steffen@innosonix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'Paolo Abeni
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver ==================== Link: https://lore.kernel.org/r/20240507134224.2646246-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: fix kernel crash when devlink reload during initializationYonglong Liu
The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by registering the devlink after hardware initialization. Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF") Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: fix port vlan filter not disabled issueYonglong Liu
According to hardware limitation, for device support modify VLAN filter state but not support bypass port VLAN filter, it should always disable the port VLAN filter. but the driver enables port VLAN filter when initializing, if there is no VLAN(except VLAN 0) id added, the driver will disable it in service task. In most time, it works fine. But there is a time window before the service task shceduled and net device being registered. So if user adds VLAN at this time, the driver will not update the VLAN filter state, and the port VLAN filter remains enabled. To fix the problem, if support modify VLAN filter state but not support bypass port VLAN filter, set the port vlan filter to "off". Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control") Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: use appropriate barrier function after setting a bit valuePeiyang Wang
There is a memory barrier in followed case. When set the port down, hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has different behaviour based on whether the state is DOWN. Thus, to make sure service task see DOWN, use smp_mb__after_atomic after calling set_bit(). CPU0 CPU1 ========================== =================================== hclgevf_set_timer_task() hclgevf_periodic_service_task() set_bit(DOWN,state) test_bit(DOWN,state) pf also has this issue. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: release PTP resources if pf initialization failedPeiyang Wang
During the PF initialization process, hclge_update_port_info may return an error code for some reason. At this point, the ptp initialization has been completed. To void memory leaks, the resources that are applied by ptp should be released. Therefore, when hclge_update_port_info returns an error code, hclge_ptp_uninit is called to release the corresponding resources. Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: change type of numa_node_mask as nodemask_tPeiyang Wang
It provides nodemask_t to describe the numa node mask in kernel. To improve transportability, change the type of numa_node_mask as nodemask_t. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: direct return when receive a unknown mailbox messageJian Shen
Currently, the driver didn't return when receive a unknown mailbox message, and continue checking whether need to generate a response. It's unnecessary and may be incorrect. Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net: hns3: using user configure after hardware resetPeiyang Wang
When a reset occurring, it's supposed to recover user's configuration. Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac and will be scheduled updated. Consider the case that reset was happened consecutively. During the first reset, the port info is configured with a temporary value cause the PHY is reset and looking for best link config. Second reset start and use pervious configuration which is not the user's. The specific process is as follows: +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool --reset | | +------------------->| reset command | | ethtool --reset +-------------------->| +------------------->| +---+ | +---+ | | | | |reset currently | | HW RESET | | |and wait to do | | | |<--+ | | | | send pervious cfg |<--+ | | (1000M FULL AN_ON) | | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | reset command |<--+ | +-------------------->| | | +---+ | | send pervious cfg | | HW RESET | | (10M HALF AN_OFF) |<--+ | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | | | | | read cfg(time task) |<--+ | | (10M HALF AN_OFF) | | |<--------------------+ | | | v v v To avoid aboved situation, this patch introduced req_speed, req_duplex, req_autoneg to store user's configuration and it only be used after hardware reset and to recover user's configuration Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-09net/smc: fix neighbour and rtable leak in smc_ib_find_route()Wen Gu
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable resolved by ip_route_output_flow() are not released or put before return. It may cause the refcount leak, so fix it. Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-08ipv6: prevent NULL dereference in ip6_output()Eric Dumazet
According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 778d80be5269 ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-08hsr: Simplify code for announcing HSR nodes timer setupLukasz Majewski
Up till now the code to start HSR announce timer, which triggers sending supervisory frames, was assuming that hsr_netdev_notify() would be called at least twice for hsrX interface. This was required to have different values for old and current values of network device's operstate. This is problematic for a case where hsrX interface is already in the operational state when hsr_netdev_notify() is called, so timer is not configured to trigger and as a result the hsrX is not sending supervisory frames to HSR ring. This error has been discovered when hsr_ping.sh script was run. To be more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states assigned in hsr_check_carrier_and_operstate(hsr). As a result there was no issue with sending supervisory frames. However, with hsr3, the notify function was called only once with operstate set to IF_OPER_UP and timer responsible for triggering supervisory frames was not fired. The solution is to use netif_oper_up() and netif_running() helper functions to assess if network hsrX device is up. Only then, when the timer is not already pending, it is started. Otherwise it is deactivated. Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-08ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()Eric Dumazet
syzbot is able to trigger the following crash [1], caused by unsafe ip6_dst_idev() use. Indeed ip6_dst_idev() can return NULL, and must always be checked. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline] RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267 Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700 RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760 RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000 R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00 FS: 00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317 fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108 ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline] ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649 ip6_route_output include/net/ip6_route.h:93 [inline] ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120 ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250 sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326 sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455 sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662 sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099 __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 5e5f3f0f8013 ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 00:14:38 +0000