summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-09drm/amdgpu: add gfx9.4.2 hw debug mode enable and disable callsJonathan Kim
GFX9.4.2 now supports per-VMID debug mode controls registers (SPI_GDBG_PER_VMID_CNTL). Because the KFD lets the HWS handle PASID-VMID mapping, the KFD will forward all debug mode setting register writes to the HWS scheduler using a new MAP_PROCESS API, so instead of writing to registers, return the required register values that the HWS needs to write on debug enable and disable. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add gfx10 hw debug mode enable and disable callsJonathan Kim
Similar to GFX9 debug devices, set the hardware debug mode by draining the SPI appropriately prior the mode setting request. Because GFX10 has waves allocated by the work group boundary and each SE's SPI instances do not communicate, the SPI drain time is much longer. This long drain time will be fixed for GFX11 onwards. Also remove a bunch of deprecated misplaced references for GFX10.3. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: fix kfd_suspend_all_processesJonathan Kim
Flush delayed restore work in kfd_suspend_all_queues instead of cancelling. Cancelling the work before it runs results in the queues becoming permanently disabled. Flushing the work ensures that the queue suspend/resume state stays balanced. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add gfx9.4.1 hw debug mode enable and disable callsJonathan Kim
On GFX9.4.1, the implicit wait count instruction on s_barrier is disabled by default in the driver during normal operation for performance requirements. There is a hardware bug in GFX9.4.1 where if the implicit wait count instruction after an s_barrier instruction is disabled, any wave that hits an exception may step over the s_barrier when returning from the trap handler with the barrier logic having no ability to be aware of this, thereby causing other waves to wait at the barrier indefinitely resulting in a shader hang. This bug has been corrected for GFX9.4.2 and onward. Since the debugger subscribes to hardware exceptions, in order to avoid this bug, the debugger must enable implicit wait count on s_barrier for a debug session and disable it on detach. In order to change this setting in the in the device global SQ_CONFIG register, the GFX pipeline must be idle. GFX9.4.1 as a compute device will either dispatch work through the compute ring buffers used for image post processing or through the hardware scheduler by the KFD. Have the KGD suspend and drain the compute ring buffer, then suspend the hardware scheduler and block any future KFD process job requests before changing the implicit wait count setting. Once set, resume all work. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add gfx9 hw debug mode enable and disable callsJonathan Kim
Implement the per-device calls to enable or disable HW debug mode for GFX9 prior to GFX9.4.1. GFX9.4.1 and onward will require their own enable/disable sequence as follow on patches. When hardware debug mode setting is requested, waves will inherit these settings in the Shader Processor Input's (SPI) Sequencer Global Block (SQG). This means that the KGD must drain all waves from the SPI into SQG (approximately 96 SPI clock cycles) prior to debug mode setting to ensure that the order of operations that the debugger expects with regards to debug mode setting transaction requests and wave inheritence of that mode is upheld. Also ensure that exception overrides are reset to their original state prior to debug enable or disable. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: clean up one inconsistent indentingYang Li
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_device.c:1036 kgd2kfd_interrupt() warn: inconsistent indenting Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Drop unused DCN_BASE variable in dcn314_resource.cSrinivasan Shanmugam
Fixes the following W=1 kernel build warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_resource.c:128:29: warning: ‘DCN_BASE’ defined but not used [-Wunused-const-variable=] 128 | static const struct IP_BASE DCN_BASE = { { { { 0x00000012, 0x000000C0, 0x000034C0, 0x00009000, 0x02403C00, 0, 0, 0 } }, | ^~~~~~~~ Suggested-by: Roman Li <Roman.Li@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder ↵Mario Limonciello
during suspend path Users have reported that s2idle wasn't working on OEM Phoenix systems, but it was root caused to be because `CONFIG_AMD_PMC` wasn't set in the distribution kernel config. To make this more apparent, raise the messaging to err instead of warn. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217497 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: setup hw debug registers on driver initializationJonathan Kim
Add missing debug trap registers references and initialize all debug registers on boot by clearing the hardware exception overrides and the wave allocation ID index. The debugger requires that TTMPs 6 & 7 save the dispatch ID to map waves onto dispatch during compute context inspection. In order to correctly set this up, set the special reserved CP bit by default whenever the MQD is initailized. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add kgd hw debug mode setting interfaceJonathan Kim
Introduce the require KGD debug calls that will execute hardware debug mode setting. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: prepare per-process debug enable and disableJonathan Kim
The ROCm debugger will attach to a process to debug by PTRACE and will expect the KFD to prepare a process for the target PID, whether the target PID has opened the KFD device or not. This patch is to explicity handle this requirement. Further HW mode setting and runtime coordination requirements will be handled in following patches. In the case where the target process has not opened the KFD device, a new KFD process must be created for the target PID. The debugger as well as the target process for this case will have not acquired any VMs so handle process restoration to correctly account for this. To coordinate with HSA runtime, the debugger must be aware of the target process' runtime enablement status and will copy the runtime status information into the debugged KFD process for later query. On enablement, the debugger will subscribe to a set of exceptions where each exception events will notify the debugger through a pollable FIFO file descriptor that the debugger provides to the KFD to manage. Finally on process termination of either the debugger or the target, debugging must be disabled if it has not been done so. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: display debug capabilitiesJonathan Kim
Expose debug capabilities in the KFD topology node's HSA capabilities and debug properties flags. Ensure correct capabilities are exposed based on firmware support. Flag definitions can be referenced in uapi/linux/kfd_sysfs.h. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: add debug and runtime enable interfaceJonathan Kim
Introduce the GPU debug operations interface. For ROCm-GDB to extend the GNU Debugger's ability to inspect the AMD GPU instruction set, provide the necessary interface to allow the debugger to HW debug-mode set and query exceptions per HSA queue, process or device. The runtime_enable interface coordinates exception handling with the HSA runtime. Usage is available in the kern docs at uapi/linux/kfd_ioctl.h. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09amd/amdkfd: drop unused KFD_IOCTL_SVM_FLAG_UNCACHED flagAlex Deucher
Was leftover from GC 9.4.3 bring up and is currently unused. Drop it for now. Cc: Philip.Yang@amd.com Cc: rajneesh.bhardwaj@amd.com Cc: Felix.Kuehling@amd.com Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/pm: conditionally disable pcie lane switching for some ↵Evan Quan
sienna_cichlid SKUs Disable the pcie lane switching for some sienna_cichlid SKUs since it might not work well on some platforms. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/pm: Fix power context allocation in SMU13Lijo Lazar
Use the right data structure for allocation. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/pm: add unique serial number support for smu_v13_0_6Yang Wang
add unique serial number support for smu_v13_0_6. (use aid0 serial number by default) Signed-off-by: Yang Wang <KevinYang.Wang@amd.com> Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/pm: Fix SMUv13.0.6 throttle status reportLijo Lazar
Add throttle status in power context Keep throttle status indicator in SMUv13 power context v2: Removed Dummy definition Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/pm: Update SMUv13.0.6 PMFW headersLijo Lazar
Update PMFW interface headers to for new metrics table format and throttling information. v2: Added dummy definition for compilation error Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vramHoratio Zhang
Use the function of amdgpu_bo_vm_destroy to handle the resource release of shadow bo. During the amdgpu_mes_self_test, shadow bo released, but vmbo->shadow_list was not, which caused a null pointer reference error in amdgpu_device_recover_vram when GPU reset. Fixes: 6c032c37ac3e ("drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)") Signed-off-by: xinhui pan <xinhui.pan@amd.com> Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Acked-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Add function parameter 'event' to kdoc in svm_range_evict()Srinivasan Shanmugam
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:1841: warning: Function parameter or member 'event' not described in 'svm_range_evict' Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up kdoc in amdgpu_device.cSrinivasan Shanmugam
Fix these warnings by deleting the deviant arguments. gcc with W=1 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg' drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:799: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg' drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_index' description in 'amdgpu_device_indirect_wreg64' drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:870: warning: Excess function parameter 'pcie_data' description in 'amdgpu_device_indirect_wreg64' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up kdoc 'ring' parameter in sdma_v6_0_ring_pad_ibSrinivasan Shanmugam
Fix this warning by adding 'ring' arguments to kdoc. gcc with W=1 drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1128: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib' Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix up kdoc formatting in display_mode_vba.cSrinivasan Shanmugam
Fixes the following W=1 kernel build warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_vba.c:936: warning: Cannot understand * ************************************************************************* Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/amdgpu: introduce DRM_AMDGPU_WERRORHamza Mahfooz
We want to do -Werror builds on our CI. However, non-amdgpu breakages have prevented us from doing so thus far. Also, there are a number of additional checks that we should enable, that the community cares about and are hidden behind -Wextra. So, define DRM_AMDGPU_WERROR to only enable -Werror for the amdgpu kernel module and enable -Wextra while disabling all of the checks that are too noisy. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Kenny Ho <kenny.ho@amd.com> Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Kenny Ho <Kenny.Ho@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: remove unused sq_int_priv variableTom Rix
clang with W=1 reports drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_int_process_v11.c:282:38: error: variable 'sq_int_priv' set but not used [-Werror,-Wunused-but-set-variable] uint8_t sq_int_enc, sq_int_errtype, sq_int_priv; ^ This variable is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd: Disallow s0ix without BIOS support againMario Limonciello
commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") showed improvements to power consumption over suspend when s0ix wasn't enabled in BIOS and the system didn't support S3. This patch however was misguided because the reason the system didn't support S3 was because SMT was disabled in OEM BIOS setup. This prevented the BIOS from allowing S3. Also allowing GPUs to use the s2idle path actually causes problems if they're invoked on systems that may not support s2idle in the platform firmware. `systemd` has a tendency to try to use `s2idle` if `deep` fails for any reason, which could lead to unexpected flows. The original commit also fixed a problem during resume from suspend to idle without hardware support, but this is no longer necessary with commit ca4751866397 ("drm/amd: Don't allow s0ix on APUs older than Raven") Revert commit cf488dcd0ab7 ("drm/amd: Allow s0ix without BIOS support") to make it match the expected behavior again. Cc: Rafael Ávila de Espíndola <rafael@espindo.la> Link: https://github.com/torvalds/linux/blob/v6.1/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c#L1060 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2599 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Correct kdoc formatting for DCN32_CRB_SEGMENT_SIZE_KB in ↵Srinivasan Shanmugam
dcn32_hubbub.c Fixes the following W=1 kernel build warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:45: warning: Cannot understand * @DCN32_CRB_SEGMENT_SIZE_KB: Maximum Configurable Return Buffer size for on line 45 - I thought it was a doc line Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix up missing 'dc' & 'pipe_ctx' kdoc parameters in ↵Srinivasan Shanmugam
delay_cursor_until_vupdate() Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1904: warning: Function parameter or member 'dc' not described in 'delay_cursor_until_vupdate' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:1904: warning: Function parameter or member 'pipe_ctx' not described in 'delay_cursor_until_vupdate' Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix up kdoc formatting in dcn32_resource_helpers.cSrinivasan Shanmugam
Fixes the following W=1 kernel build warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:97: warning: Cannot understand * ************************************************************************** drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:264: warning: Cannot understand * ************************************************************************* drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:435: warning: Cannot understand * ************************************************************************* drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:475: warning: Cannot understand * ************************************************************************* drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:599: warning: Function parameter or member 'dc' not described in 'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:599: warning: Function parameter or member 'context' not described in 'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:587: warning: Function parameter or member 'dc' not described in 'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch' drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_resource_helpers.c:587: warning: Function parameter or member 'context' not described in 'dcn32_can_support_mclk_switch_using_fw_based_vblank_stretch' Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdxcp: fix Makefile to build amdxcp moduleBob Zhou
After drm conduct amdgpu Makefile, amdgpu.ko has been created and "amdgpu-y +=" in amdxcp Makefile isn't used. So modify amdgpu-y to amdxcp-y and build amdxcp module. Signed-off-by: Bob Zhou <bob.zhou@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up missing parameters kdoc in svm_migrate_vma_to_ramSrinivasan Shanmugam
Fix these warnings by adding & deleting the deviant arguments. gcc with W=1 drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'node' not described in 'svm_migrate_vma_to_ram' drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'trigger' not described in 'svm_migrate_vma_to_ram' drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vma_to_ram' drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:671: warning: Excess function parameter 'adev' description in 'svm_migrate_vma_to_ram' drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_migrate.c:771: warning: Function parameter or member 'fault_page' not described in 'svm_migrate_vram_to_ram' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: set finished fence error if job timedoutZhenGuo Yin
Set finished fence to ETIME error if job timedout. Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix missing parameter desc for 'xcp_id' in ↵Srinivasan Shanmugam
amdgpu_amdkfd_reserve_mem_limit Fix these warnings by adding 'xcp_id' argument. gcc with W=1 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:160: warning: Function parameter or member 'xcp_id' not described in 'amdgpu_amdkfd_reserve_mem_limit' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up missing parameter in kdoc for 'inst' in gmc_ v7, v8, v9, ↵Srinivasan Shanmugam
v10, v11.c Fix these warnings by adding 'inst' arguments to kdocs. gcc with W=1 drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:428: warning: Function parameter or member 'inst' not described in 'gmc_v7_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:626: warning: Function parameter or member 'inst' not described in 'gmc_v8_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c:423: warning: Function parameter or member 'inst' not described in 'gmc_v10_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c:328: warning: Function parameter or member 'inst' not described in 'gmc_v11_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:950: warning: Function parameter or member 'inst' not described in 'gmc_v9_0_flush_gpu_tlb_pasid' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up missing kdoc parameter 'inst' in get_wave_count() & ↵Srinivasan Shanmugam
kgd_gfx_v9_get_cu_occupancy() Fix these warnings by adding 'inst' arguments to kdocs. gcc with W=1 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:692: warning: Function parameter or member 'inst' not described in 'get_wave_count' drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:763: warning: Function parameter or member 'inst' not described in 'kgd_gfx_v9_get_cu_occupancy' Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix missing parameter desc for 'xcc_id' in gfx_v7_0.c & amdgpu_rlc.cSrinivasan Shanmugam
Fix these warnings by adding 'xcc_id' arguments. gcc with W=1 drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1557: warning: Function parameter or member 'xcc_id' not described in 'gfx_v7_0_select_se_sh' drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:38: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_enter_safe_mode' drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:62: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_gfx_rlc_exit_safe_mode' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: flag added to handle errors from svm validate and mapAlex Sierra
If a return error is raised during validation and mapping of a prange, this flag is set. It is a rare occurrence, but it could happen when `amdgpu_hmm_range_get_pages_done` returns true. In such cases, the caller should retry. However, it is important to ensure that the prange is updated correctly during the retry. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Initialize xcc maskLijo Lazar
For ASICs which are not initialized through discovery, initialize GFX cluster as 1. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix up kdoc formats in dcn32_fpu.cSrinivasan Shanmugam
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2806: warning: Cannot understand * ************************************************************************* drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2855: warning: Cannot understand * ************************************************************************* drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2900: warning: Function parameter or member 'dc' not described in 'dcn32_assign_fpo_vactive_candidate' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2900: warning: Function parameter or member 'context' not described in 'dcn32_assign_fpo_vactive_candidate' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2900: warning: Function parameter or member 'fpo_candidate_stream' not described in 'dcn32_assign_fpo_vactive_candidate' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2929: warning: Function parameter or member 'dc' not described in 'dcn32_find_vactive_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2929: warning: Function parameter or member 'context' not described in 'dcn32_find_vactive_pipe' drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2929: warning: Function parameter or member 'vactive_margin_req_us' not described in 'dcn32_find_vactive_pipe' Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Add missing kdoc entries in update_planes_and_stream_adapterSrinivasan Shanmugam
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'dc' not described in 'update_planes_and_stream_adapter' drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'update_type' not described in 'update_planes_and_stream_adapter' drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'planes_count' not described in 'update_planes_and_stream_adapter' drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream' not described in 'update_planes_and_stream_adapter' drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'stream_update' not described in 'update_planes_and_stream_adapter' drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:374: warning: Function parameter or member 'array_of_surface_update' not described in 'update_planes_and_stream_adapter' Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix create_dmamap_sg_bo kdoc warningsSrinivasan Shanmugam
Fix the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:292: warning: Cannot understand * @create_dmamap_sg_bo: Creates a amdgpu_bo object to reflect information Cc: Felix Kuehling <felix.kuehling@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Fix MEC pipe interrupt enablementLijo Lazar
for_each_inst modifies xcc_mask and therefore the loop doesn't initialize properly interrupts on all pipes. Keep looping through xcc as the outer loop to fix this issue. Fixes: c4050ff1a43e ("drm/amdkfd: Use xcc mask for identifying xcc") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: Add new gfx_target_versions for GC 9.4.3Graham Sider
For GC 9.4.3, set gfx_target_version to 90402 for rev 1 and later (APU or dGPU), 90401 for rev 0 dGPU, and 90400 for rev 0 APU. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up missing kdoc in sdma_v6_0.cSrinivasan Shanmugam
Address a bunch of kdoc warnings: gcc with W=1 drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'job' not described in 'sdma_v6_0_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:248: warning: Function parameter or member 'flags' not described in 'sdma_v6_0_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:946: warning: Function parameter or member 'timeout' not described in 'sdma_v6_0_ring_test_ib' drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1125: warning: Function parameter or member 'ring' not described in 'sdma_v6_0_ring_pad_ib' drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'vmid' not described in 'sdma_v6_0_ring_emit_vm_flush' drivers/gpu/drm/amd/amdgpu/sdma_v6_0.c:1176: warning: Function parameter or member 'pd_addr' not described in 'sdma_v6_0_ring_emit_vm_flush' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up kdoc in amdgpu_acpi.cSrinivasan Shanmugam
Fix these warnings by adding & deleting the deviant arguments. gcc with W=1 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Function parameter or member 'numa_info' not described in 'amdgpu_acpi_get_node_id' drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:906: warning: Excess function parameter 'nid' description in 'amdgpu_acpi_get_node_id' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix up kdoc in sdma_v4_4_2.cSrinivasan Shanmugam
Address a bunch of kdoc warnings: gcc with W=1 drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:426: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_gfx_stop' drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:457: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_stop' drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:470: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_page_stop' drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:506: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_ctx_switch_enable' drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:794: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_rlc_resume' drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:810: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_load_microcode' drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c:854: warning: Function parameter or member 'inst_mask' not described in 'sdma_v4_4_2_inst_start' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: enable tmz by default for GC 11.0.1Ikshwaku Chauhan
Add IP GC 11.0.1 in the list of target to have tmz enabled by default. Signed-off-by: Ikshwaku Chauhan <ikshwaku.chauhan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdkfd: fix gfx_target_version for certain 11.0.3 devicesAlex Deucher
Certain boards with GC IP 11.0.3 need slightly different handling in the shader compiler due to board specific bounding box optimizations. Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: keep irq count in amdgpu_irq_disable_allGuchun Chen
This can clean up all irq warnings because of unbalanced amdgpu_irq_get/put when unplugging/unbinding device, and leave irq count decrease in each ip fini function. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 11:31:53 +0000