Age | Commit message (Collapse) | Author |
|
TSO and TBS cannot coexist. For now we set i.MX Ethernet QOS controller to
use the first TX queue with TSO and the rest for TBS.
TX queues with TBS can support etf qdisc hw offload.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the dma conf being reallocated on each call to stmmac_open(), any
information in there is lost, unless we specifically handle it.
The STMMAC_TBS_EN bit is set when adding an etf qdisc, and the etf qdisc
therefore would stop working when link was set down and then back up.
Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Full LTO takes the '-mbranch-protection=none' passed to the compiler
when generating the dynamic shadow call stack patching code as a hint to
stop emitting PAC instructions altogether. (Thin LTO appears unaffected
by this)
Work around this by disabling LTO for the compilation unit, which
appears to convince the linker that it should still use PAC in the rest
of the kernel..
Fixes: 3b619e22c460 ("arm64: implement dynamic shadow call stack for Clang")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240123133052.1417449-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit 8c5a19cb17a71e ("arm64: scs: Work around full LTO
issue with dynamic SCS"), which did not quite fix the issue as intended.
Apparently, -fno-unwind-tables is ignored for the final full LTO link
when it is set on any of the objects, resulting in an early boot crash
due to the SCS patching code patching itself, and attempting to pop the
return address from the shadow stack while the associated push was still
a PACIASP instruction when it executed.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240123133052.1417449-5-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8
The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.
Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.
The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 034dfc5df99eb ("ipv6: export in6addr_loopback to modules")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch. Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:
XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0
Whereas I would have expected:
XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed
The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below. The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.
Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.
Fixes: e14293803f4e ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309afc ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Pull jfs fix from David Kleikamp:
"Revert a bad sanity check"
* tag 'jfs-6.8-rc3' of github.com:kleikamp/linux-shaggy:
Revert "jfs: fix shift-out-of-bounds in dbJoin"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two small fixes for tracefs and eventfs:
- Fix register_snapshot_trigger() on allocation error
If the snapshot fails to allocate, the register_snapshot_trigger()
can still return success. If the call to
tracing_alloc_snapshot_instance() returned anything but 0, it
returned 0, but it should have been returning the error code from
that allocation function.
- Remove leftover code from tracefs doing a dentry walk on remount.
The update_gid() function was called by the tracefs code on remount
to update the gid of eventfs, but that is no longer the case, but
that code wasn't deleted. Nothing calls it. Remove it"
* tag 'trace-v6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracefs: remove stale 'update_gid' code
tracing/trigger: Fix to return error if failed to alloc snapshot
|
|
Modern OSes use iptables implementation with nf_tables as a backend,
e.g.:
$ iptables -V
iptables v1.8.8 (nf_tables)
Pablo points out that we need CONFIG_NFT_COMPAT to make that work,
otherwise we see a lot of:
Warning: Extension DNAT revision 0 not supported, missing kernel module?
with DNAT being just an example here, other modules we need
include udp, TTL, length etc.
Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When working with GPIO, its direction must be set either when the GPIO is
requested by gpiod_get*() or later on by one of the gpiod_direction_*()
functions. Neither of this is done here which results in undefined
behavior on some systems.
As the reset GPIO is used right after it is requested here, it makes sense
to configure it as GPIOD_OUT_HIGH right away. With that, the following
gpiod_set_value_cansleep(1) becomes redundant and can be safely
removed.
Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"22 hotfixes. 11 are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: thp_get_unmapped_area must honour topdown preference
mm: huge_memory: don't force huge page alignment on 32 bit
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory
scs: add CONFIG_MMU dependency for vfree_atomic()
mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range()
mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty()
selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag
selftests: mm: fix map_hugetlb failure on 64K page size systems
MAINTAINERS: supplement of zswap maintainers update
stackdepot: make fast paths lock-less again
stackdepot: add stats counters exported via debugfs
mm, kmsan: fix infinite recursion due to RCU critical section
mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
selftests/mm: switch to bash from sh
MAINTAINERS: add man-pages git trees
mm: memcontrol: don't throttle dying tasks on memory.high
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE
uprobes: use pagesize-aligned virtual address when replacing pages
selftests/mm: mremap_test: fix build warning
...
|
|
If we have multiple clients and some/all are flooding the receives to
such an extent that we can retry a LOT handling multishot receives, then
we can be starving some clients and hence serving traffic in an
imbalanced fashion.
Limit multishot retry attempts to some arbitrary value, whose only
purpose serves to ensure that we don't keep serving a single connection
for way too long. We default to 32 retries, which should be more than
enough to provide fairness, yet not so small that we'll spend too much
time requeuing rather than handling traffic.
Cc: stable@vger.kernel.org
Depends-on: 704ea888d646 ("io_uring/poll: add requeue return code from poll multishot handling")
Depends-on: 1e5d765a82f ("io_uring/net: un-indent mshot retry path in io_recv_finish()")
Depends-on: e84b01a880f6 ("io_uring/poll: move poll execution helpers higher up")
Fixes: b3fdea6ecb55 ("io_uring: multishot recv")
Fixes: 9bb66906f23e ("io_uring: support multishot in recvmsg")
Link: https://github.com/axboe/liburing/issues/1043
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since our poll handling is edge triggered, multishot handlers retry
internally until they know that no more data is available. In
preparation for limiting these retries, add an internal return code,
IOU_REQUEUE, which can be used to inform the poll backend about the
handler wanting to retry, but that this should happen through a normal
task_work requeue rather than keep hammering on the issue side for this
one request.
No functional changes in this patch, nobody is using this return code
just yet.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for putting some retry logic in there, have the done
path just skip straight to the end rather than have too much nesting
in here.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for calling __io_poll_execute() higher up, move the
functions to avoid forward declarations.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Previous commit that added support for Huawei MateBook D16 2021
with Ryzen 4600H (HVY-WXX9 M1010) was incomplete.
To activate support for this laptop, the DMI table in
acp3x-es83xx machine driver must also be updated.
Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop")
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://msgid.link/r/20240128172229.657142-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Chen-Yu Tsai <wens@kernel.org>:
This series adds SPDIF controllers for the H616 and H618.
There's also a fix for SPDIF on H6: the controller also has a
receiver that was not correctly modeled.
|
|
Make sure the rpc timeout was assigned with the correct value for
initial timeout and max number of retries.
Fixes: 57331a59ac0d ("NFSv4.1: Use the nfs_client's rpc timeouts for backchannel")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
All error handling paths, except this one, go to 'out' where
release_swfw_sync() is called.
This call balances the acquire_swfw_sync() call done at the beginning of
the function.
Branch to the error handling path in order to correctly release some
resources in case of error.
Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The e1000e driver supports hardware with a variety of different clock
speeds, and thus a variety of different increment values used for
programming its PTP hardware clock.
The values currently programmed in e1000e_ptp_init are incorrect. In
particular, only two maximum adjustments are used: 24000000 - 1, and
600000000 - 1. These were originally intended to be used with the 96 MHz
clock and the 25 MHz clock.
Both of these values are actually slightly too high. For the 96 MHz clock,
the actual maximum value that can safely be programmed is 23,999,938. For
the 25 MHz clock, the maximum value is 599,999,904.
Worse, several devices use a 24 MHz clock or a 38.4 MHz clock. These parts
are incorrectly assigned one of either the 24million or 600million values.
For the 24 MHz clock, this is not a significant issue: its current
increment value can support an adjustment up to 7billion in the positive
direction. However, the 38.4 KHz clock uses an increment value which can
only support up to 230,769,157 before it starts overflowing.
To understand where these values come from, consider that frequency
adjustments have the form of:
new_incval = base_incval + (base_incval * adjustment) / (unit of adjustment)
The maximum adjustment is reported in terms of parts per billion:
new_incval = base_incval + (base_incval * adjustment) / 1 billion
The largest possible adjustment is thus given by the following:
max_incval = base_incval + (base_incval * max_adj) / 1 billion
Re-arranging to solve for max_adj:
max_adj = (max_incval - base_incval) * 1 billion / base_incval
We also need to ensure that negative adjustments cannot underflow. This can
be achieved simply by ensuring max_adj is always less than 1 billion.
Introduce new macros in e1000.h codifying the maximum adjustment in PPB for
each frequency given its associated increment values. Also clarify where
these values come from by commenting about the above equations.
Replace the switch statement in e1000e_ptp_init with one which mirrors the
increment value switch statement from e1000e_get_base_timinica. For each
device, assign the appropriate maximum adjustment based on its frequency.
Some parts can have one of two frequency modes as determined by
E1000_TSYNCRXCTL_SYSCFI.
Since the new flow directly matches the assignments in
e1000e_get_base_timinca, and uses well defined macro names, it is much
easier to verify that the resulting maximum adjustments are correct. It
also avoids difficult to parse construction such as the "hw->mac.type <
e1000_phc_lpt", and the use of fallthrough which was especially confusing
when combined with a conditional block.
Note that I believe the current increment value configuration used for
24MHz clocks is sub-par, as it leaves at least 3 extra bits available in
the INCVALUE register. However, fixing that requires more careful review of
the clock rate and associated values.
Reported-by: Trey Harrison <harrisondigitalmedia@gmail.com>
Fixes: 68fe1d5da548 ("e1000e: Add Support for 38.4MHZ frequency")
Fixes: d89777bf0e42 ("e1000e: add support for IEEE-1588 PTP")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Add a new compatible string for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the H6 was added to the bindings, only the TX DMA channel was
added. As the hardware supports both transmit and receive functions,
the binding is missing the RX DMA channel and is thus incorrect.
Also, the reset control was not made mandatory.
Add the RX DMA channel for SPDIF on H6 by removing the compatible from
the list of compatibles that should only have a TX DMA channel. And add
the H6 compatible to the list of compatibles that require the reset
control to be present.
Fixes: b20453031472 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The laptop requires a quirk ID to enable its internal microphone. Add
it to the DMI quirk table.
Reported-by: Techno Mooney <techno.mooney@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218402
Cc: stable@vger.kernel.org
Signed-off-by: Techno Mooney <techno.mooney@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://msgid.link/r/20240129081148.1044891-1-bagasdotme@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
lsm_{[gs]et_self_attr,list_modules} syscall numbers
To pick the changes in these csets:
d8b0f5465012538c ("wire up syscalls for statmount/listmount")
5f42375904b08890 ("LSM: wireup Linux Security Module syscalls")
Used in some architectures to create syscall tables.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbfMuAlUMRO9Hqa6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
This reverts commit cca974daeb6c43ea971f8ceff5a7080d7d49ee30.
The added sanity check is incorrect. BUDMIN is not the wrong value and
is too small.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
This reverts commit 5f38ac54e60562323ea4abb1bfb37d043ee23357.
This causes issues with rebooting and the 7800XT.
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: stable@vger.kernel.org
Fixes: 5f38ac54e605 ("drm/amd/pm: fix the high voltage and temperature issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3062
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TCP rx zerocopy intent is to map pages initially allocated
from NIC drivers, not pages owned by a fs.
This patch adds to can_map_frag() these additional checks:
- Page must not be a compound one.
- page->mapping must be NULL.
This fixes the panic reported by ZhangPeng.
syzbot was able to loopback packets built with sendfile(),
mapping pages owned by an ext4 file to TCP rx zerocopy.
r3 = socket$inet_tcp(0x2, 0x1, 0x0)
mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0)
r4 = socket$inet_tcp(0x2, 0x1, 0x0)
bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10)
connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10)
r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
fallocate(r5, 0x0, 0x0, 0x85b8)
sendfile(r4, r5, 0x0, 0x8ba0)
getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23,
&(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0,
0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40)
r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00',
0x181e42, 0x0)
Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive")
Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/
Reported-and-bisected-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-mm@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packets. It is dropped only when the last fragment is processed
or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received.
However, the NCI device may be deallocated before that which leads to skb
leak.
As by design the rx_data_reassembly skb is bound to the NCI device and
nothing prevents the device to be freed before the skb is processed in
some way and cleaned, free it on the NCI device cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Cc: stable@vger.kernel.org
Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller reported [1] hitting a warning after failing to allocate
resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will
not help much in this case, it might be prudent to switch to
netdev_warn_once(). At the very least it will suppress syzkaller
reports such as [1].
Just in case, use netdev_warn_once() in send_prp_supervision_frame()
for similar reasons.
[1]
HSR: Could not send supervision frame
WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294
...
Call Trace:
<IRQ>
hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382
call_timer_fn+0x193/0x590 kernel/time/timer.c:1700
expire_timers kernel/time/timer.c:1751 [inline]
__run_timers+0x764/0xb20 kernel/time/timer.c:2022
run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035
__do_softirq+0x21a/0x8de kernel/softirq.c:553
invoke_softirq kernel/softirq.c:427 [inline]
__irq_exit_rcu kernel/softirq.c:632 [inline]
irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644
sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649
...
This issue is also found in older kernels (at least up to 5.10).
Cc: stable@vger.kernel.org
Reported-by: syzbot+3ae0a3f42c84074b7c8e@syzkaller.appspotmail.com
Fixes: 121c33b07b31 ("net: hsr: introduce common code for skb initialization")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set the segment size of the virtio_gpu device to the value
used by the drm helpers when allocating sg lists to fix the
following complaint from DMA_API debug code:
DMA-API: virtio-pci 0000:07:00.0: mapping sg segment longer than
device claims to support [len=262144] [max=65536]
Cc: stable@vger.kernel.org
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7258a4cc-da16-5c34-a042-2a23ee396d56@redhat.com
|
|
In XFS_DAS_NODE_REMOVE_ATTR case, xfs_attr_mode_remove_attr() sets
filter to XFS_ATTR_INCOMPLETE. The filter is then reset in
xfs_attr_complete_op() if XFS_DA_OP_REPLACE operation is performed.
The filter is not reset though if XFS just removes the attribute
(args->value == NULL) with xfs_attr_defer_remove(). attr code goes
to XFS_DAS_DONE state.
Fix this by always resetting XFS_ATTR_INCOMPLETE filter. The replace
operation already resets this filter in anyway and others are
completed at this step hence don't need it.
Fixes: fdaf1bb3cafc ("xfs: ATTR_REPLACE algorithm with LARP enabled needs rework")
Signed-off-by: Andrey Albershteyn <aalbersh@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
This reverts commit 67794f882adca00d043899ac248bc002751da9f6.
We need to explicitly set up the clock selector to workaround a problem
with the Behringer mixers. This was originally done in d2e8f641257d
("ALSA: usb-audio: Explicitly set up the clock selector")
The problem with MOTU M Series mentioned in commit message was fixed in
a different way by checking control capabilities of clock selectors.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This HP Laptop uses ALC236 codec with COEF 0x07 controlling the
mute LED. Enable existing quirk for this device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240128155704.2333812-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
1 SF114-32
If you connect an external headset/microphone to the 3.5mm jack on the
Acer Swift 1 SF114-32 it does not recognize the microphone. This fixes
that and gives the user the ability to choose between internal and
headset mic.
Signed-off-by: David Senoner <seda18@rolmail.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240126155626.2304465-1-seda18@rolmail.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
io_read_mshot() always relies on poll triggering retries, and this works
fine as long as we do a retry per size of the buffer being read. The
buffer size is given by the size of the buffer(s) in the given buffer
group ID.
But if we're reading less than what is available, then we don't always
get to read everything that is available. For example, if the buffers
available are 32 bytes and we have 64 bytes to read, then we'll
correctly read the first 32 bytes and then wait for another poll trigger
before we attempt the next read. This next poll trigger may never
happen, in which case we just sit forever and never make progress, or it
may trigger at some point in the future, and now we're just delivering
the available data much later than we should have.
io_read_mshot() could do retries itself, but that is wasteful as we'll
be going through all of __io_read() again, and most likely in vain.
Rather than do that, bump our poll reference count and have
io_poll_check_events() do one more loop and check with vfs_poll() if we
have more data to read. If we do, io_read_mshot() will get invoked again
directly and we'll read the next chunk.
io_poll_multishot_retry() must only get called from inside
io_poll_issue(), which is our multishot retry handler, as we know we
already "own" the request at this point.
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/1041
Fixes: fc68fcda0491 ("io_uring/rw: add support for IORING_OP_READ_MULTISHOT")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region:Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
|
|
The 'eventfs_update_gid()' function is no longer called, so remove it
(and the helper function it uses).
Link: https://lore.kernel.org/all/CAHk-=wj+DsZZ=2iTUkJ-Nojs9fjYMvPs1NuoM3yK7aTDtJfPYQ@mail.gmail.com/
Fixes: 8186fff7ab64 ("tracefs/eventfs: Use root and instance inodes as default ownership")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix boot issue on single core Lantiq Danube devices
- fix boot issue on Loongson64 platforms
- fix improper FPU setup
- fix missing prototypes issues
* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
MIPS: loongson64: set nid for reserved memblock region
Revert "MIPS: loongson64: set nid for reserved memblock region"
MIPS: lantiq: register smp_ops on non-smp platforms
MIPS: loongson64: set nid for reserved memblock region
MIPS: reserve exception vector space ONLY ONCE
MIPS: BCM63XX: Fix missing prototypes
MIPS: sgi-ip32: Fix missing prototypes
MIPS: sgi-ip30: Fix missing prototypes
MIPS: fw arc: Fix missing prototypes
MIPS: sgi-ip27: Fix missing prototypes
MIPS: Alchemy: Fix missing prototypes
MIPS: Cobalt: Fix missing prototypes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent an inconsistent futex operation leading to stale state
exposure
* tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent the reuse of stale pi_state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Initialize the resend node of each IRQ descriptor, not only the first
one
* tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Initialize resend_node hlist for all interrupt descriptors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Preserve the number of idle calls and sleep entries across CPU
hotplug events in order to be able to compute correct averages
- Limit the duration of the clocksource watchdog checking interval as
too long intervals lead to wrongly marking the TSC as unstable
* tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Preserve number of idle sleeps across CPU hotplug events
clocksource: Skip watchdog check for large watchdog intervals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure 32-bit syscall registers are properly sign-extended
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
* tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5
x86/entry/ia32: Ensure s32 is sign extended to s64
x86/cpu: Add model number for Intel Clearwater Forest processor
x86/CPU/AMD: Add X86_FEATURE_ZEN5
x86/paravirt: Make BUG_func() usable by non-GPL modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix crash when reserved memory is not added to memory.
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
of reserved pages may cause access of NODE_DATA() with invalid nid and
crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
to ensure a valid node id is always passed to init_reserved_page()"
* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix crash when reserved memory is not added to memory
|
|
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202401222059.Wli6OGT0-lkp@intel.com/
|
|
Printing the inventory on a serial console can be quite slow and thus may
trigger the hung task detector (CONFIG_DETECT_HUNG_TASK=y) and possibly
reboot the machine. Adding a cond_resched() prevents this.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
|
|
Report if the calculated cache stride size is zero, otherwise the cache
flushing routine will never finish and hang the machine.
This can be reproduced with a testcase in qemu, where the firmware reports
wrong cache values.
Signed-off-by: Helge Deller <deller@gmx.de>
|