summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-05-19qla2xxx: Remove mapped vp index iterator macro dead code.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Add MBC option for fast SFP data access.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Fix beacon blink logic for ISP26xx/83xx.Himanshu Madani
Signed-off-by: Himanshu Madani <himanshu.madani@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Don't check for firmware hung during the reset context for ISP82XX.Tej Prakash
Signed-off-by: Tej Prakash <tej.prakash@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Delay driver unload if there is any pending activity going on.Sawan Chandak
Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ISP27xx queue index shadow registers.Joe Carnuccio
For ISP27xx use the request/response queue index shadow registers to avoid directly access them on the PCI bus. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ISP27xx firmware dump template spec updates (including T274).Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Reduce the time we wait for a command to complete during SCSI error ↵Chad Dupuis
handling. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the ↵Hiral Patel
owner of the reset. Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Clear loop_id for ports that are marked lost during fabric scanning.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Adjust adapter reset routine to the changes in firmware ↵Armen Baloyan
specification for ISPFx00. Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Avoid escalating the SCSI error handler if the command is not found ↵Chad Dupuis
in firmware. If the firmware cannot find the command specified then return SUCCESS to the error handler so as not to needlessly escalate. Also cleanup the resources for the command since we cannot expect the original command to returned in interrupt context. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: IOCB data should be copied to I/O mem using memcpy_toio.Atul Deshmukh
Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: ISP8044 poll ipmdio bus timeout improvement.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Remove unnecessary printk_ratelimited from qla_nx2.cChad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Include <delay.h> file for msleep declartion in qla_nx2.c file.Atul Deshmukh
Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Use proper log message for flash lock failed error.Atul Deshmukh
Signed-off-by: Atul Deshmukh <atul.deshmukh@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Decrease pci access for response queue processing for ISPFX00.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Change copyright year to 2014 in all the source files.Armen Baloyan
Signed-off-by: Armen Baloyan <armen.baloyan@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Update entry type 270 to match spec update.Joe Carnuccio
Increment the address by 4 on each iteration. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Enable fw_dump_size for ISP8044.Hiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Introduce fw_dump_flag to track fw dump progress.Hiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Remove unnecessary delays from fw dump code path.Hiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Track the process when the ROM_LOCK failure happensHiral Patel
Signed-off-by: Hiral Patel <hiral.patel@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Correction to ISP27xx template entry types 256 and 258.Joe Carnuccio
The window address inserted into the dump should be have been incremented by 1 rather than 4. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Add ISP8044 serdes bsg interface.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Check for peg alive counter and clear any outstanding mailbox command.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Support of new firmware dump opcodes QLA8044_RDDFE(38), ↵Pratik Mohanty
QLA8044_RDMDIO(39),QLA8044_POLLWR(40). Signed-off-by: Pratik Mohanty <pratik.mohanty@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Allow the next firmware dump if the previous dump capture fails for ↵Saurav Kashyap
ISP8044. Signed-off-by: Giridhar Malavali <giridhar.malvali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Add pci device id 0x2271.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Issue abort command for outstanding commands during cleanup when ↵Giridhar Malavali
only firmware is alive. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Log when device state is moved to failed state.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Correct ISP83xx/ISP27xx mislogic in setting out_mb in ↵Joe Carnuccio
qla25xx_init_req_que(). Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Allow ISP83XX and ISP27XX both to write req_q_out register.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Correct operations for ISP27xx template types 270 and 271.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Do not schedule reset when one is already active when receiving an ↵Chad Dupuis
invalid status handle. If an adapter reset is already in progress, do not schedule another one when we receive an invalid status handle. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla2xxx: Wait for reset completion without lock for ISPFX00.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19megaraid_sas: fix a small problem when reading state value from hwTomas Henzl
When the driver reads state values from the hw it might happen that different values are read in subsequent reads and this can cause problems, this may lead to a timeout in this function and a non working adapter. Cc: Adam Radford <aradford@gmail.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Shintaro Minemoto <fj3207hq@aa.jp.fujitsu.com> Acked-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-09Linux 3.15-rc5v3.15-rc5Linus Torvalds
2014-05-09Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A somewhat unpleasantly large collection of small fixes. The big ones are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'. It was using __init functions with predictably suboptimal results. Another key fix is a build fix which would produce output that simply would not decompress correctly in some configuration, due to the existing Makefiles picking up an unfortunate local label and mistaking it for the global symbol _end. Additional fixes include the handling of 64-bit numbers when setting the vdso data page (a latent bug which became manifest when i386 started exporting a vdso with time functions), a fix to the new MSR manipulation accessors which would cause features to not get properly unblocked, a build fix for 32-bit userland, and a few new platform quirks" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall() x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro x86: Fix typo preventing msr_set/clear_bit from having an effect x86/intel: Add quirk to disable HPET for the Baytrail platform x86/hpet: Make boot_hpet_disable extern x86-64, build: Fix stack protector Makefile breakage with 32-bit userland x86/reboot: Add reboot quirk for Certec BPC600 asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/* asmlinkage, x86: Add explicit __visible to arch/x86/* asmlinkage: Revert "lto: Make asmlinkage __visible" x86, build: Don't get confused by local symbols x86/efi: earlyprintk=efi,keep fix
2014-05-09x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()Boris Ostrovsky
With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall() may lose upper bits or, worse, add them since compiler will do this: (u64)(tk->wall_to_monotonic.tv_nsec << tk->shift) instead of ((u64)tk->wall_to_monotonic.tv_nsec << tk->shift) So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in the subsequent 'while' loop. We need an explicit cast. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1399648287-15178-1-git-send-email-boris.ostrovsky@oracle.com Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> # v3.14 Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-05-09x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macroAndres Freund
The spuriously added semicolon didn't have any effect because the macro isn't currently in use. c0a639ad0bc6b178b46996bd1f821a04643e2bde Signed-off-by: Andres Freund <andres@anarazel.de> Link: http://lkml.kernel.org/r/1399598957-7011-3-git-send-email-andres@anarazel.de Cc: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-05-09x86: Fix typo preventing msr_set/clear_bit from having an effectAndres Freund
Due to a typo the msr accessor function introduced in 22085a66c2fab6cf9b9393c056a3600a6b4735de didn't have any lasting effects because they accidentally wrote the old value back. After c0a639ad0bc6b178b46996bd1f821a04643e2bde this at the very least this causes cpuid limits not to be lifted on some cpus leading to missing capabilities for those. Signed-off-by: Andres Freund <andres@anarazel.de> Link: http://lkml.kernel.org/r/1399598957-7011-2-git-send-email-andres@anarazel.de Cc: Borislav Petkov <bp@suse.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-05-08Merge tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfsLinus Torvalds
Pull xfs fixes from Dave Chinner: "The main fix is adding support for default ACLs on O_TMPFILE opened inodes to bring XFS into line with other filesystems. Metadata CRCs are now also considered well enough tested to be fully supported, so we're removing the shouty warnings issued at mount time for filesystems with that format. And there's transaction block reservation overrun fix. Summary: - fix a remote attribute size calculation bug that leads to a transaction overrun - add default ACLs to O_TMPFILE files - Remove the EXPERIMENTAL tag from filesystems with metadata CRC support" * tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs: xfs: remote attribute overwrite causes transaction overrun xfs: initialize default acls for ->tmpfile() xfs: fully support v5 format filesystems
2014-05-08Merge tag 'trace-fixes-v3.15-rc4-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This contains two fixes. The first is a long standing bug that causes bogus data to show up in the refcnt field of the module_refcnt tracepoint. It was introduced by a merge conflict resolution back in 2.6.35-rc days. The result should be 'refcnt = incs - decs', but instead it did 'refcnt = incs + decs'. The second fix is to a bug that was introduced in this merge window that allowed for a tracepoint funcs pointer to be used after it was freed. Moving the location of where the probes are released solved the problem" * tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Fix use of tracepoint funcs after rcu free trace: module: Maintain a valid user count
2014-05-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just a few fixups to various drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elantech - fix touchpad initialization on Gigabyte U2442 Input: tca8418 - fix loading this driver as a module from a device tree Input: bma150 - extend chip detection for bma180 Input: atkbd - fix keyboard not working on some LG laptops Input: synaptics - add min/max quirk for ThinkPad Edge E431
2014-05-08Merge tag 'sound-3.15-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A bunch of small fixes for USB-audio and HD-audio, where most of them are for regressions: USB-audio PM fixes, ratelimit annoyance fix, HDMI offline state fix, and a couple of device-specific quirks" * tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - hdmi: Set converter channel count even without sink ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data ALSA: usb-audio: Fix deadlocks at resuming ALSA: usb-audio: Save mixer status only once at suspend ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined ALSA: hda - add headset mic detect quirk for a Dell laptop
2014-05-08Merge tag 'mfd-mmc-fixes-3.15-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mmc/rtsx revert from Lee Jones. * tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
2014-05-08tracepoint: Fix use of tracepoint funcs after rcu freeMathieu Desnoyers
Commit de7b2973903c "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints" introduces a use after free by calling release_probes on the old struct tracepoint array before the newly allocated array is published with rcu_assign_pointer. There is a race window where tracepoints (RCU readers) can perform a "use-after-grace-period-after-free", which shows up as a GPF in stress-tests. Link: http://lkml.kernel.org/r/53698021.5020108@oracle.com Link: http://lkml.kernel.org/p/1399549669-25465-1-git-send-email-mathieu.desnoyers@efficios.com Reported-by: Sasha Levin <sasha.levin@oracle.com> CC: Oleg Nesterov <oleg@redhat.com> CC: Dave Jones <davej@redhat.com> Fixes: de7b2973903c "tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints" Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-08trace: module: Maintain a valid user countRomain Izard
The replacement of the 'count' variable by two variables 'incs' and 'decs' to resolve some race conditions during module unloading was done in parallel with some cleanup in the trace subsystem, and was integrated as a merge. Unfortunately, the formula for this replacement was wrong in the tracing code, and the refcount in the traces was not usable as a result. Use 'count = incs - decs' to compute the user count. Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.com Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: stable@vger.kernel.org # 2.6.35 Fixes: c1ab9cab7509 "merge conflict resolution" Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 06:36:02 +0000