summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-28powerpc: Remove some unused functionsMichael Ellerman
Remove slice_set_psize() which is not used. It was added in 3a8247cc2c85 "powerpc: Only demote individual slices rather than whole process" but was never used. Remove vsx_assist_exception() which is not used. It was added in ce48b2100785 "powerpc: Add VSX context save/restore, ptrace and signal support" but was never used. Remove generic_mach_cpu_die() which is not used. Its last caller was removed in 375f561a4131 "powerpc/powernv: Always go into nap mode when CPU is offline". Remove mpc7448_hpc2_power_off() and mpc7448_hpc2_halt() which are unused. These were introduced in c5d56332fd6c "[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform" but were never used. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> [mpe: Update changelog with details on when/why they are unused] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-28powerpc/lib: Makefile, use obj64-y to consolidate 64-bit rulesMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-28powerpc/lib: Makefile, consolidate obj-y sectionsMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-28powerpc/mm: fix undefined reference to `.__kernel_map_pages' on FSL PPC64Kim Phillips
arch/powerpc has __kernel_map_pages implementations in mm/pgtable_32.c, and mm/hash_utils_64.c, of which the former is built for PPC32, and the latter for PPC64 machines with PPC_STD_MMU. Fix arch/powerpc/Kconfig to not select ARCH_SUPPORTS_DEBUG_PAGEALLOC when CONFIG_PPC_STD_MMU_64 isn't defined, i.e., for 64-bit book3e builds to use the generic __kernel_map_pages() in mm/debug-pagealloc.c. LD init/built-in.o mm/built-in.o: In function `kernel_map_pages': include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' include/linux/mm.h:2076: undefined reference to `.__kernel_map_pages' Makefile:925: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-27powerpc/powernv: Skip registering log region when CONFIG_PRINTK=nPranith Kumar
When CONFIG_PRINTK=n, log_buf_addr_get() returns NULL and log_buf_len_get() return 0. Check for these return values and skip registering the dump buffer. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-27powerpc/pseries: Fix endian problems with LE migrationCyril Bur
RTAS events require arguments be passed in big endian while hypercalls have their arguments passed in registers and the values should therefore be in CPU endian. The "ibm,suspend_me" 'RTAS' call makes a sequence of hypercalls to setup one true RTAS call. This means that "ibm,suspend_me" is handled specially in the ppc_rtas() syscall. The ppc_rtas() syscall has its arguments in big endian and can therefore pass these arguments directly to the RTAS call. "ibm,suspend_me" is handled specially from within ppc_rtas() (by calling rtas_ibm_suspend_me()) which has left an endian bug on little endian systems due to the requirement of hypercalls. The return value from rtas_ibm_suspend_me() gets returned in cpu endian, and is left unconverted, also a bug on little endian systems. rtas_ibm_suspend_me() does not actually make use of the rtas_args that it is passed. This patch removes the convoluted use of the rtas_args struct to pass params to rtas_ibm_suspend_me() in favour of passing what it needs as actual arguments. This patch also ensures the two callers of rtas_ibm_suspend_me() pass function parameters in cpu endian and in the case of ppc_rtas(), converts the return value. migrate_store() (the other caller of rtas_ibm_suspend_me()) is from a sysfs file which deals with everything in cpu endian so this function only underwent cleanup. This patch has been tested with KVM both LE and BE and on PowerVM both LE and BE. Under QEMU/KVM the migration happens without touching these code pathes. For PowerVM there is no obvious regression on BE and the LE code path now provides the correct parameters to the hypervisor. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23selftests/powerpc: Add memcmp testcaseAnton Blanchard
Add a testcase for the new ppc64 memcmp. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc: Add 64bit optimised memcmpAnton Blanchard
I noticed ksm spending quite a lot of time in memcmp on a large KVM box. The current memcmp loop is very unoptimised - byte at a time compares with no loop unrolling. We can do much much better. Optimise the loop in a few ways: - Unroll the byte at a time loop - For large (at least 32 byte) comparisons that are also 8 byte aligned, use an unrolled modulo scheduled loop using 8 byte loads. This is similar to our glibc memcmp. A simple microbenchmark testing 10000000 iterations of an 8192 byte memcmp was used to measure the performance: baseline: 29.93 s modified: 1.70 s Just over 17x faster. v2: Incorporated some suggestions from Segher: - Use andi. instead of rdlicl. - Convert bdnzt eq, to bdnz. It's just duplicating the earlier compare and was a relic from a previous version. - Don't use cr5, we have plans to use that CR field for fast local atomics. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/powernv: Remove pnv_pci_probe_mode()Gavin Shan
The callback (ppc_md.pci_probe_mode()) is used to determine if the child PCI devices of the indicated PCI bus should be probed from device-tree or hardware. On PowerNV platform, we always expect probing PCI devices from hardware, which is PowerPC PCI core's default behaviour. Also, the callback had some delay implemented based on PHB's device node property "reset-clear-timestamp", which wasn't exported from skiboot. So we don't need this function and it's safe to remove it. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/eeh: Allow to set maximal frozen timesGavin Shan
When PE's frozen count hits maximal allowed frozen times, which is 5 currently, it will be forced to be offline permanently. Once the PE is removed permanently, rebooting machine is required to bring the PE back. It's not convienent when testing EEH functionality. The patch exports the maximal allowed frozen times through debugfs entry (/sys/kernel/debug/powerpc/eeh_max_freezes). Requested-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/eeh: Introduce flag EEH_PE_REMOVEDGavin Shan
The conditions that one specific PE's frozen count exceeds the maximal allowed times (EEH_MAX_ALLOWED_FREEZES) and it's in isolated or recovery state indicate the PE was removed permanently implicitly. The patch introduces flag EEH_PE_REMOVED to indicate that explicitly so that we don't depend on the fixed maximal allowed times, which can be varied as we do in subsequent patch. Flag EEH_PE_REMOVED is expected to be marked for the PE whose frozen count exceeds the maximal allowed times, or just failed from recovery. Requested-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/eeh: Fix missed PE#0 on P7IOCGavin Shan
PE#0 should be regarded as valid for P7IOC, while it's invalid for PHB3. The patch adds flag EEH_VALID_PE_ZERO to differentiate those two cases. Without the patch, we possibly see frozen PE#0 state is cleared without EEH recovery taken on P7IOC as following kernel logs indicate: [root@ltcfbl8eb ~]# dmesg : pci 0000:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0000:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0001:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0001:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0002:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0002:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0003:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0003:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0003:20 : [PE# 002] Secondary bus 32..63 associated with PE#2 : EEH: Clear non-existing PHB#3-PE#0 EEH: PHB location: U78AE.001.WZS00M9-P1-002 Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/kernel: Avoid memory corruption at early stageGavin Shan
When calling to early_setup(), we pick "boot_paca" up for the master CPU and initialize that with initialise_paca(). At that point, the SLB shadow buffer isn't populated yet. Updating the SLB shadow buffer should corrupt what we had in physical address 0 where the trap instruction is usually stored. This hasn't been observed to cause any trouble in practice, but is obviously fishy. Fixes: 6f4441ef7009 ("powerpc: Dynamically allocate slb_shadow from memblock") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc: Replace cpumask_weight(cpu_possible_mask) with num_possible_cpus()Emil Medve
num_possible_cpus() is just a shorthand for it. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2Naveen N. Rao
Currently, all non-dot symbols are being treated as function descriptors in ABIv1. This is incorrect and is resulting in perf probe not working: # perf probe do_fork Added new event: Failed to write event: Invalid argument Error: Failed to add events. # dmesg | tail -1 [192268.073063] Could not insert probe at _text+768432: -22 perf probe bases all kernel probes on _text and writes, for example, "p:probe/do_fork _text+768432" to /sys/kernel/debug/tracing/kprobe_events. In-kernel, _text is being considered to be a function descriptor and is resulting in the above error. Fix this by changing how we lookup symbol addresses on ppc64. We first check for the dot variant of a symbol and look at the non-dot variant only if that fails. In this manner, we avoid having to look at the function descriptor. While at it, also separate out how this works on ABIv2 where we don't have dot symbols, but need to use the local entry point. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc: Rename _TIF_SYSCALL_T_OR_A to _TIF_SYSCALL_DOTRACEMichael Ellerman
Once upon a time, at least 9 years ago (< 2.6.12), _TIF_SYSCALL_T_OR_A meant "TRACE or AUDIT". But these days it means TRACE or AUDIT or SECCOMP or TRACEPOINT or NOHZ. All of those are implemented via syscall_dotrace() so rename the flag to that to try and clarify things. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc: Remove unused CPU_FTR_IABRMichael Ellerman
We removed the last usage of CPU_FTR_IABR in commit 1ad7d70562ee "powerpc/xmon: Enable HW instruction breakpoint on POWER8". Mark it as free. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23selftests/powerpc: Add subpage protection self test.Paul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> mpe: Fix compile errors and formatting. Add tempfile logic to Makefile. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23selftests/powerpc: Make git ignore all binaries in powerpc test suiteAnshuman Khandual
This patch includes all of the powerpc test binaries into the .gitignore file listing in their respective directories. This will make sure that git ignores all of these test binaries when displaying status. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/pci: remove the multi-init for pci_dn->phbWei Yang
pci_dn->phb is set to phb in update_dn_pci_info(), if succeed. This patch removes the duplication of pci_dn->phb initialization. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powernv/iommu: disable IOMMU bypass with param iommu=nobypassThadeu Lima de Souza Cascardo
When IOMMU bypass is enabled, a PCI device can read and write memory that was not mapped by the driver without causing an EEH. That might cause memory corruption, for example. When we disable bypass, DMA reads and writes to addresses not mapped by the IOMMU will cause an EEH, allowing us to debug such issues. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdownAnshuman Khandual
The current handling of EPOW_SHUTDOWN_ON_UPS event does not shutdown the system after logging the message. All the events of EPOW_SYSTEM_SHUTDOWN action code (EPOW_SHUTDOWN_ON_UPS is a part of it) must initiate system shutdown as per the SPAPR spec. If the LPAR does not shutdown after receiving this rtas based event, it will expose itself to a forced abrupt shutdown initiated by the platform firmware. This patch fixes the situation. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/powernv: Print the M64 range information in bootup logWei Yang
The M64 range information is missed in dmesg, which would be helpful in debug. This patch prints the M64 range information in the same format as M32. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Add ability to reset the cardRyan Grimm
Adds reset to sysfs which will PERST the card. If load_image_on_perst is set to "user" or "factory", the PERST will cause that image to be loaded. load_image_on_perst is set to "user" for production. "none" could be used for debugging. The PSL trace arrays are preserved which then can be read through debugfs. PERST also triggers CAPP recovery. An HMI comes in, which is handled by EEH. EEH unbinds the driver, calls into Sapphire to reinitialize the PHB, then rebinds the driver. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Enable CAPP recoveryRyan Grimm
Turning snoops on is the last step in CAPP recovery. Sapphire is expected to have reinitialized the PHB and done the previous recovery steps. Add mode argument to opal call to do this. Driver can turn snoops off although it does not currently. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Add image control to sysfsRyan Grimm
load_image_on_perst identifies whether a PERST will cause the image to be flashed to the card. And if so, which image. Valid entries are: "none", "user" and "factory". A value of "none" means PERST will not cause the image to be flashed. A power cycle to the pcie slot is required to load the image. "user" loads the user provided image and "factory" loads the factory image upon PERST. sysfs updates the cxl struct in the driver then calls cxl_update_image_control to write the vals in the VSEC. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Use image state defaults for reloading FPGARyan Grimm
Select defaults such that a PERST causes flash image reload. Select which image based on what the card is set up to load. CXL_VSEC_PERST_LOADS_IMAGE selects whether PERST assertion causes flash image load. CXL_VSEC_PERST_SELECT_USER selects which image is loaded on the next PERST. cxl_update_image_control writes these bits into the VSEC. Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Update CXL ABI documentationPhilippe Bergheaud
This fixes two typos and explains where shared attributes are stored. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: Add tracepointsIan Munsie
This patch adds tracepoints throughout the cxl driver, which can provide insight into: - Context lifetimes - Commands sent to the PSL and AFU and their completion status - Segment and page table misses and their resolution - PSL and AFU interrupts - slbia calls from the powerpc copro_fault code These tracepoints are mostly intended to aid in debugging (particularly for new AFU designs), and may be useful standalone or in conjunction with hardware traces collected by the PSL (read out via the trace interface in debugfs) and AFUs. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22cxl: remove redundant increment of hwirqColin Ian King
hwirq has not been initialized, however it is being incremented and also not being referenced in a loop. This error was detected with cppcheck: [drivers/misc/cxl/irq.c:439]: (error) Uninitialized variable: hwirq Commit 80fa93fce37d ("cxl: Name interrupts in /proc/interrupt") introduced this error. This is a simple fix that removes the redundant increment. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc/ps3: Enable CONFIG_PS3_REPOSITORY_WRITE in ps3_defconfigMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc/ps3: Fix sys-manager-core sparse warningsGeoff Levand
Fixes warnings like these: drivers/ps3/sys-manager-core.c: error: symbol 'ps3_sys_manager_power_off' redeclared with different type Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc/ps3: Fix vuart sparse warningsGeoff Levand
Fix sparse warnings like these: drivers/ps3/ps3-vuart.c: warning: symbol 'ps3_vuart_disable_interrupt_tx' was not declared. Should it be static? Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc/ps3: Write highmem info to repositoryGeoff Levand
Add calls to the ps3_mm_set_repository_highmem() routine when the ps3 r1 highmem region is either created or destroyed. Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc/ps3: Add ps3_mm_set_repository_highmemGeoff Levand
Add the new routine ps3_mm_set_repository_highmem() that saves highmem info to the LV1 hypervisor registry so that the info will be available to second stage OS's loaded by petitboot/kexec. FreeBSD and some Linux derivatives use this feature. Also, move the existing ps3_mm_get_repository_highmem() routine up in the source file. This implementation of ps3_mm_set_repository_highmem() assumes the repository will have a single highmem region entry (at index 0). Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc/ps3: Add empty repository highmem routinesGeoff Levand
To avoid the need for preprocessor conditionals in C source files add a set of empty inline repository highmem write routines to platform.h that are used when CONFIG_PS3_REPOSITORY_WRITE is not defined. Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22powerpc: Update G5 defconfigMichael Ellerman
Add CGROUPS and DEVTMPFS, which allows booting with newer userspaces. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable NUMA balancing in pseries[_le]_defconfigMichael Neuling
Distros are enabling NUMA balancing (eg Ubuntu), so it would be good to get some more test coverage with it. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable various container features on pseries defconfigs.Anton Blanchard
Enable config options required by lxc and docker. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable overlayfs on pseries and ppc64 defconfigsAnton Blanchard
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable KSM on pseries and ppc64 defconfigsAnton Blanchard
KSM will only be used on areas marked for merging via madvise, and it is showing nice improvements on KVM workloads, so enable it by default. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable CONFIG_SATA_AHCI on pseries and ppc64 defconfigsAnton Blanchard
We are starting to see ppc64 boxes with SATA AHCI adapters in it, so enable it in our defconfigs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-21powerpc: Enable on demand governor on ppc64_defconfigAnton Blanchard
This was enabled on the pseries defconfigs recently, but missed the ppc64 one. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20powerpc: Update all configs using savedefconfigMichael Ellerman
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29powerpc/kvm: Create proper names for the kvm_host_state PMU fieldsMichael Ellerman
We have two arrays in kvm_host_state that contain register values for the PMU. Currently we only create an asm-offsets symbol for the base of the arrays, and do the array offset in the assembly code. Creating an asm-offsets symbol for each field individually makes the code much nicer to read, particularly for the MMCRx/SIxR/SDAR fields, and might have helped us notice the recent double restore bug we had in this code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Alexander Graf <agraf@suse.de>
2014-12-29powerpc/lib: Do not include string.o in obj-y twiceAndreas Ruprecht
In the Makefile, string.o (which is generated from string.S) is included into the list of objects being built unconditionally (obj-y) in line 12. Additionally, if CONFIG_PPC64 is set, it is included again in line 17. This patch removes the latter unnecessary inclusion. Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29powerpc/44x/Akebono: Remove select of IBM_EMAC_RGMII_WOLPaul Bolle
Commit 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform") added a select of IBM_EMAC_RGMII_WOL. But that Kconfig symbol isn't (yet) part of the tree. So this select has been a nop since that commit was included in v3.16-rc1. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29cxl: Disable SPAP register when freeing SPAIan Munsie
When we deactivate the AFU directed mode we free the scheduled process area, but did not clear the register in the hardware that has a pointer to it. This should be fine since we will have already cleared out every context and we won't do anything that would cause the hardware to access it until after we have allocated a new one, but just to be safe this patch clears out the register when we free the page. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29cxl: Disable AFU debug flagIan Munsie
Upon inspection of the implementation specific registers, it was discovered that the high bit of the implementation specific RXCTL register was enabled, which enables the DEADB00F debug feature. The debug feature causes MMIO reads to a disabled AFU to respond with 0xDEADB00F instead of all Fs. In general this should not be visible as the kernel will only allow MMIO access to enabled AFUs, but there may be some circumstances where an AFU may become disabled while it is use. One such case would be an AFU designed to only be used in the dedicated process mode and to disable itself after it has completed it's work (however even in that case the effects of this debug flag would be limited as the userspace application must have completed any required MMIO accesses before the AFU disables itself with or without the flag). This patch removes the debug flag and replaces the magic value programmed into this register with a preprocessor define so it is clearer what the rest of this initialisation does. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29cxl: Early return from cxl_handle_fault for a shut down contextIan Munsie
If a context is being detached and we get a translation fault for it there is little point getting it's mm and handling the fault, so just respond with an address error and return earlier. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 14:55:15 +0000