summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-26mptcp: Do not return EINPROGRESS when subflow creation succeedsMat Martineau
New subflows are created within the kernel using O_NONBLOCK, so EINPROGRESS is the expected return value from kernel_connect(). __mptcp_subflow_connect() has the correct logic to consider EINPROGRESS to be a successful case, but it has also used that error code as its return value. Before v5.19 this was benign: all the callers ignored the return value. Starting in v5.19 there is a MPTCP_PM_CMD_SUBFLOW_CREATE generic netlink command that does use the return value, so the EINPROGRESS gets propagated to userspace. Make __mptcp_subflow_connect() always return 0 on success instead. Fixes: ec3edaa7ca6c ("mptcp: Add handling of outgoing MP_JOIN requests") Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20220725205231.87529-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Florian Westphal says: ==================== netfilter updates for net Three late fixes for netfilter: 1) If nf_queue user requests packet truncation below size of l3 header, we corrupt the skb, then crash. Reject such requests. 2) add cond_resched() calls when doing cycle detection in the nf_tables graph. This avoids softlockup warning with certain rulesets. 3) Reject rulesets that use nftables 'queue' expression in family/chain combinations other than those that are supported. Currently the ruleset will load, but when userspace attempts to reinject you get WARN splat + packet drops. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_queue: only allow supported familes and hooks netfilter: nf_tables: add rescheduling points during loop detection walks netfilter: nf_queue: do not allow packet truncation below transport header offset ==================== Link: https://lore.kernel.org/r/20220726192056.13497-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26Merge tag 'for-net-2022-07-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix early wakeup after suspend - Fix double free on error - Fix use-after-free on l2cap_chan_put * tag 'for-net-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put Bluetooth: Always set event mask on suspend Bluetooth: mgmt: Fix double free on error path ==================== Link: https://lore.kernel.org/r/20220726221328.423714-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26Merge tag 'mm-hotfixes-stable-2022-07-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Thirteen hotfixes. Eight are cc:stable and the remainder are for post-5.18 issues or are too minor to warrant backporting" * tag 'mm-hotfixes-stable-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: update Gao Xiang's email addresses userfaultfd: provide properly masked address for huge-pages Revert "ocfs2: mount shared volume without ha stack" hugetlb: fix memoryleak in hugetlb_mcopy_atomic_pte fs: sendfile handles O_NONBLOCK of out_fd ntfs: fix use-after-free in ntfs_ucsncmp() secretmem: fix unhandled fault in truncate mm/hugetlb: separate path for hwpoison entry in copy_hugetlb_page_range() mm: fix missing wake-up event for FSDAX pages mm: fix page leak with multiple threads mapping the same page mailmap: update Seth Forshee's email address tmpfs: fix the issue that the mount and remount results are inconsistent. mm: kfence: apply kmemleak_ignore_phys on early allocated pool
2022-07-26scsi: ufs: core: Fix a race condition related to device managementBart Van Assche
If a device management command completion happens after wait_for_completion_timeout() times out and before ufshcd_clear_cmds() is called, then the completion code may crash on the complete() call in __ufshcd_transfer_req_compl(). Fix the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x64/0x178 __ufshcd_transfer_req_compl+0x30c/0x9c0 ufshcd_poll+0xf0/0x208 ufshcd_sl_intr+0xb8/0xf0 ufshcd_intr+0x168/0x2f4 __handle_irq_event_percpu+0xa0/0x30c handle_irq_event+0x84/0x178 handle_fasteoi_irq+0x150/0x2e8 __handle_domain_irq+0x114/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 efi_header_end+0x110/0x680 __irq_exit_rcu+0x108/0x124 __handle_domain_irq+0x118/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 cpuidle_enter_state+0x3ac/0x8c4 do_idle+0x2fc/0x55c cpu_startup_entry+0x84/0x90 kernel_init+0x0/0x310 start_kernel+0x0/0x608 start_kernel+0x4ec/0x608 Link: https://lore.kernel.org/r/20220720170228.1598842-1-bvanassche@acm.org Fixes: 5a0b0cb9bee7 ("[SCSI] ufs: Add support for sending NOP OUT UPIU") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26scsi: core: Fix warning in scsi_alloc_sgtables()Jason Yan
As explained in SG_IO howto[1]: "If iovec_count is non-zero then 'dxfer_len' should be equal to the sum of iov_len lengths. If not, the minimum of the two is the transfer length." When iovec_count is non-zero and dxfer_len is zero, the sg_io() just genarated a null bio, and finally caused a warning below. To fix it, skip generating a bio for this request if dxfer_len is zero. [1] https://tldp.org/HOWTO/SCSI-Generic-HOWTO/x198.html WARNING: CPU: 2 PID: 3643 at drivers/scsi/scsi_lib.c:1032 scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032 Modules linked in: CPU: 2 PID: 3643 Comm: syz-executor397 Not tainted 5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-204/01/2014 RIP: 0010:scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032 Code: e7 fc 31 ff 44 89 f6 e8 c1 4e e7 fc 45 85 f6 0f 84 1a f5 ff ff e8 93 4c e7 fc 83 c5 01 0f b7 ed e9 0f f5 ff ff e8 83 4c e7 fc <0f> 0b 41 bc 0a 00 00 00 e9 2b fb ff ff 41 bc 09 00 00 00 e9 20 fb RSP: 0018:ffffc90000d07558 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88801bfc96a0 RCX: 0000000000000000 RDX: ffff88801c876000 RSI: ffffffff849060bd RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff849055b9 R11: 0000000000000000 R12: ffff888012b8c000 R13: ffff88801bfc9580 R14: 0000000000000000 R15: ffff88801432c000 FS: 00007effdec8e700(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007effdec6d718 CR3: 00000000206d6000 CR4: 0000000000150ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> scsi_setup_scsi_cmnd drivers/scsi/scsi_lib.c:1219 [inline] scsi_prepare_cmd drivers/scsi/scsi_lib.c:1614 [inline] scsi_queue_rq+0x283e/0x3630 drivers/scsi/scsi_lib.c:1730 blk_mq_dispatch_rq_list+0x6ea/0x22e0 block/blk-mq.c:1851 __blk_mq_sched_dispatch_requests+0x20b/0x410 block/blk-mq-sched.c:299 blk_mq_sched_dispatch_requests+0xfb/0x180 block/blk-mq-sched.c:332 __blk_mq_run_hw_queue+0xf9/0x350 block/blk-mq.c:1968 __blk_mq_delay_run_hw_queue+0x5b6/0x6c0 block/blk-mq.c:2045 blk_mq_run_hw_queue+0x30f/0x480 block/blk-mq.c:2096 blk_mq_sched_insert_request+0x340/0x440 block/blk-mq-sched.c:451 blk_execute_rq+0xcc/0x340 block/blk-mq.c:1231 sg_io+0x67c/0x1210 drivers/scsi/scsi_ioctl.c:485 scsi_ioctl_sg_io drivers/scsi/scsi_ioctl.c:866 [inline] scsi_ioctl+0xa66/0x1560 drivers/scsi/scsi_ioctl.c:921 sd_ioctl+0x199/0x2a0 drivers/scsi/sd.c:1576 blkdev_ioctl+0x37a/0x800 block/ioctl.c:588 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7effdecdc5d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 81 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007effdec8e2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007effded664c0 RCX: 00007effdecdc5d9 RDX: 0000000020002300 RSI: 0000000000002285 RDI: 0000000000000004 RBP: 00007effded34034 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 00007effded34054 R14: 2f30656c69662f2e R15: 00007effded664c8 Link: https://lore.kernel.org/r/20220720025120.3226770-1-yanaijie@huawei.com Fixes: 25636e282fe9 ("block: fix SG_IO vector request data length handling") Reported-by: syzbot+d44b35ecfb807e5af0b5@syzkaller.appspotmail.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26scsi: ufs: host: Hold reference returned by of_parse_phandle()Liang He
In ufshcd_populate_vreg(), we should hold the reference returned by of_parse_phandle() and then use it to call of_node_put() for refcount balance. Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com Fixes: aa4976130934 ("ufs: Add regulator enable support") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26scsi: mpt3sas: Stop fw fault watchdog work item during system shutdownDavid Jeffery
During system shutdown or reboot, mpt3sas will reset the firmware back to ready state. However, the driver leaves running a watchdog work item intended to keep the firmware in operational state. This causes a second, unneeded reset on shutdown and moves the firmware back to operational instead of in ready state as intended. And if the mpt3sas_fwfault_debug module parameter is set, this extra reset also panics the system. mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the firmware back to ready state. Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown") Tested-by: Laurence Oberman <loberman@redhat.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26mailmap: update Gao Xiang's email addressesGao Xiang
I've been in Alibaba Cloud for more than one year, mainly to address cloud-native challenges (such as high-performance container images) for open source communities. Update my email addresses on behalf of my current employer (Alibaba Cloud) to support all my (team) work in this area. Also add an outdated @redhat.com address of me. Link: https://lkml.kernel.org/r/20220719154246.62970-1-xiang@kernel.org Signed-off-by: Gao Xiang <xiang@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-26userfaultfd: provide properly masked address for huge-pagesNadav Amit
Commit 824ddc601adc ("userfaultfd: provide unmasked address on page-fault") was introduced to fix an old bug, in which the offset in the address of a page-fault was masked. Concerns were raised - although were never backed by actual code - that some userspace code might break because the bug has been around for quite a while. To address these concerns a new flag was introduced, and only when this flag is set by the user, userfaultfd provides the exact address of the page-fault. The commit however had a bug, and if the flag is unset, the offset was always masked based on a base-page granularity. Yet, for huge-pages, the behavior prior to the commit was that the address is masked to the huge-page granulrity. While there are no reports on real breakage, fix this issue. If the flag is unset, use the address with the masking that was done before. Link: https://lkml.kernel.org/r/20220711165906.2682-1-namit@vmware.com Fixes: 824ddc601adc ("userfaultfd: provide unmasked address on page-fault") Signed-off-by: Nadav Amit <namit@vmware.com> Reported-by: James Houghton <jthoughton@google.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: James Houghton <jthoughton@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-26Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_putLuiz Augusto von Dentz
This fixes the following trace which is caused by hci_rx_work starting up *after* the final channel reference has been put() during sock_close() but *before* the references to the channel have been destroyed, so instead the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to prevent referencing a channel that is about to be destroyed. refcount_t: increment on 0; use-after-free. BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0 Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705 CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W 4.14.234-00003-g1fb6d0bd49a4-dirty #28 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM sm8150 Flame DVT (DT) Workqueue: hci0 hci_rx_work Call trace: dump_backtrace+0x0/0x378 show_stack+0x20/0x2c dump_stack+0x124/0x148 print_address_description+0x80/0x2e8 __kasan_report+0x168/0x188 kasan_report+0x10/0x18 __asan_load4+0x84/0x8c refcount_dec_and_test+0x20/0xd0 l2cap_chan_put+0x48/0x12c l2cap_recv_frame+0x4770/0x6550 l2cap_recv_acldata+0x44c/0x7a4 hci_acldata_packet+0x100/0x188 hci_rx_work+0x178/0x23c process_one_work+0x35c/0x95c worker_thread+0x4cc/0x960 kthread+0x1a8/0x1c4 ret_from_fork+0x10/0x18 Cc: stable@kernel.org Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-26Bluetooth: Always set event mask on suspendAbhishek Pandit-Subedi
When suspending, always set the event mask once disconnects are successful. Otherwise, if wakeup is disallowed, the event mask is not set before suspend continues and can result in an early wakeup. Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Cc: stable@vger.kernel.org Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-26Bluetooth: mgmt: Fix double free on error pathDan Carpenter
Don't call mgmt_pending_remove() twice (double free). Fixes: 6b88eff43704 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-26wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()Tetsuo Handa
lockdep complains use of uninitialized spinlock at ieee80211_do_stop() [1], for commit f856373e2f31ffd3 ("wifi: mac80211: do not wake queues on a vif that is being stopped") guards clear_bit() using fq.lock even before fq_init() from ieee80211_txq_setup_flows() initializes this spinlock. According to discussion [2], Toke was not happy with expanding usage of fq.lock. Since __ieee80211_wake_txqs() is called under RCU read lock, we can instead use synchronize_rcu() for flushing ieee80211_wake_txqs(). Link: https://syzkaller.appspot.com/bug?extid=eceab52db7c4b961e9d6 [1] Link: https://lkml.kernel.org/r/874k0zowh2.fsf@toke.dk [2] Reported-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: f856373e2f31ffd3 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Tested-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com> Acked-by: Toke Høiland-Jørgensen <toke@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/9cc9b81d-75a3-3925-b612-9d0ad3cab82b@I-love.SAKURA.ne.jp [ pick up commit 3598cb6e1862 ("wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()") from -next] Link: https://lore.kernel.org/all/87o7xcq6qt.fsf@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26ice: do not setup vlan for loopback VSIMaciej Fijalkowski
Currently loopback test is failiing due to the error returned from ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)Maciej Fijalkowski
Tx side sets EOP and RS bits on descriptors to indicate that a particular descriptor is the last one and needs to generate an irq when it was sent. These bits should not be checked on completion path regardless whether it's the Tx or the Rx. DD bit serves this purpose and it indicates that a particular descriptor is either for Rx or was successfully Txed. EOF is also set as loopback test does not xmit fragmented frames. Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead of EOP and RS pair. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix VSIs unable to share unicast MACAnirudh Venkataramanan
The driver currently does not allow two VSIs in the same PF domain to have the same unicast MAC address. This is incorrect in the sense that a policy decision is being made in the driver when it must be left to the user. This approach was causing issues when rebooting the system with VFs spawned not being able to change their MAC addresses. Such errors were present in dmesg: [ 7921.068237] ice 0000:b6:00.2 ens2f2: Unicast MAC 6a:0d:e4:70:ca:d1 already exists on this PF. Preventing setting VF 7 unicast MAC address to 6a:0d:e4:70:ca:d1 Fix that by removing this restriction. Doing this also allows us to remove some additional code that's checking if a unicast MAC filter already exists. Fixes: 47ebc7b02485 ("ice: Check if unicast MAC exists before setting VF MAC") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Offload params: td_offset, cd_tunnel_params were corrupted, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: 69e66c04c672 ("ice: Add mpls+tso support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix max VLANs available for VFPrzemyslaw Patynowski
Legacy VLAN implementation allows for untrusted VF to have 8 VLAN filters, not counting VLAN 0 filters. Current VLAN_V2 implementation lowers available filters for VF, by counting in VLAN 0 filter for both TPIDs. Fix this by counting only non zero VLAN filters. Without this patch, untrusted VF would not be able to access 8 VLAN filters. Fixes: cc71de8fa133 ("ice: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26netfilter: nft_queue: only allow supported familes and hooksFlorian Westphal
Trying to use 'queue' statement in ingress (for example) triggers a splat on reinject: WARNING: CPU: 3 PID: 1345 at net/netfilter/nf_queue.c:291 ... because nf_reinject cannot find the ruleset head. The netdev family doesn't support async resume at the moment anyway, so disallow loading such rulesets with a more appropriate error message. v2: add 'validate' callback and also check hook points, v1 did allow ingress use in 'table inet', but that doesn't work either. (Pablo) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-26netfilter: nf_tables: add rescheduling points during loop detection walksFlorian Westphal
Add explicit rescheduling points during ruleset walk. Switching to a faster algorithm is possible but this is a much smaller change, suitable for nf tree. Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1460 Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-26netfilter: nf_queue: do not allow packet truncation below transport header ↵Florian Westphal
offset Domingo Dirutigliano and Nicola Guerrera report kernel panic when sending nf_queue verdict with 1-byte nfta_payload attribute. The IP/IPv6 stack pulls the IP(v6) header from the packet after the input hook. If user truncates the packet below the header size, this skb_pull() will result in a malformed skb (skb->len < 0). Fixes: 7af4cc3fa158 ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink") Reported-by: Domingo Dirutigliano <pwnzer0tt1@proton.me> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-26Merge tag 's390-5.19-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Alexander GordeevL - Prevent relatively slow PRNO TRNG random number operation from being called from interrupt context. That could for example cause some network loads to timeout. * tag 's390-5.19-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/archrandom: prevent CPACF trng invocations in interrupt context
2022-07-26mm: fix NULL pointer dereference in wp_page_reuse()Qi Zheng
The vmf->page can be NULL when the wp_page_reuse() is invoked by wp_pfn_shared(), it will cause the following panic: BUG: kernel NULL pointer dereference, address: 000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 18 PID: 923 Comm: Xorg Not tainted 5.19.0-rc8.bm.1-amd64 #263 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g14 RIP: 0010:_compound_head+0x0/0x40 [...] Call Trace: wp_page_reuse+0x1c/0xa0 do_wp_page+0x1a5/0x3f0 __handle_mm_fault+0x8cf/0xd20 handle_mm_fault+0xd5/0x2a0 do_user_addr_fault+0x1d0/0x680 exc_page_fault+0x78/0x170 asm_exc_page_fault+0x22/0x30 To fix it, this patch performs a NULL pointer check before dereferencing the vmf->page. Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-26drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()Nathan Chancellor
When booting a kernel compiled with clang's CFI protection (CONFIG_CFI_CLANG), there is a CFI failure in drm_simple_kms_crtc_mode_valid() when trying to call simpledrm_simple_display_pipe_mode_valid() through ->mode_valid(): [ 0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8): ... [ 0.324928] Call trace: [ 0.324969] __ubsan_handle_cfi_check_fail+0x58/0x60 [ 0.325053] __cfi_check_fail+0x3c/0x44 [ 0.325120] __cfi_slowpath_diag+0x178/0x200 [ 0.325192] drm_simple_kms_crtc_mode_valid+0x58/0x80 [ 0.325279] __drm_helper_update_and_validate+0x31c/0x464 ... The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs' expects a return type of 'enum drm_mode_status', not 'int'. Correct it to fix the CFI failure. Cc: stable@vger.kernel.org Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1647 Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
2022-07-26bridge: Do not send empty IFLA_AF_SPEC attributeBenjamin Poirier
After commit b6c02ef54913 ("bridge: Netlink interface fix."), br_fill_ifinfo() started to send an empty IFLA_AF_SPEC attribute when a bridge vlan dump is requested but an interface does not have any vlans configured. iproute2 ignores such an empty attribute since commit b262a9becbcb ("bridge: Fix output with empty vlan lists") but older iproute2 versions as well as other utilities have their output changed by the cited kernel commit, resulting in failed test cases. Regardless, emitting an empty attribute is pointless and inefficient. Avoid this change by canceling the attribute if no AF_SPEC data was added. Fixes: b6c02ef54913 ("bridge: Netlink interface fix.") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220725001236.95062-1-bpoirier@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26Merge branch 'octeontx2-minor-tc-fixes'Paolo Abeni
Subbaraya Sundeep says: ==================== Octeontx2 minor tc fixes This patch set fixes two problems found in tc code wrt to ratelimiting and when installing UDP/TCP filters. Patch 1: CN10K has different register format compared to CN9xx hence fixes that. Patch 2: Check flow mask also before installing a src/dst port filter, otherwise installing for one port installs for other one too. ==================== Link: https://lore.kernel.org/r/1658650874-16459-1-git-send-email-sbhatta@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: Fix UDP/TCP src and dst port tc filtersSubbaraya Sundeep
Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa. Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: cn10k: Fix egress ratelimit configurationSunil Goutham
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-25sctp: fix sleep in atomic context bug in timer handlersDuoming Zhou
There are sleep in atomic context bugs in timer handlers of sctp such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(), sctp_generate_t1_init_event(), sctp_generate_timeout_event(), sctp_generate_t3_rtx_event() and so on. The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter that may sleep could be called by different timer handlers which is in interrupt context. One of the call paths that could trigger bug is shown below: (interrupt context) sctp_generate_probe_event sctp_do_sm sctp_side_effects sctp_cmd_interpreter sctp_outq_teardown sctp_outq_init sctp_sched_set_sched n->init_sid(..,GFP_KERNEL) sctp_sched_prio_init_sid //may sleep This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched() from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic context bugs. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: dsa: fix reference counting for LAG FDBsVladimir Oltean
Due to an invalid conflict resolution on my side while working on 2 different series (LAG FDBs and FDB isolation), dsa_switch_do_lag_fdb_add() does not store the database associated with a dsa_mac_addr structure. So after adding an FDB entry associated with a LAG, dsa_mac_addr_find() fails to find it while deleting it, because &a->db is zeroized memory for all stored FDB entries of lag->fdbs, and dsa_switch_do_lag_fdb_del() returns -ENOENT rather than deleting the entry. Fixes: c26933639b54 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220723012411.1125066-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski
Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26drm/amdgpu: Re-enable DCN for 64-bit powerpcMichael Ellerman
Commit d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine") disabled the DCN driver for all of powerpc due to unresolved build failures with some compilers. Further digging shows that the build failures only occur with compilers that default to 64-bit long double. Both the ppc64 and ppc64le ABIs define long double to be 128-bits, but there are compilers in the wild that default to 64-bits. The compilers provided by the major distros (Fedora, Ubuntu) default to 128-bits and are not affected by the build failure. There is a compiler flag to force 128-bit long double, which may be the correct long term fix, but as an interim fix only allow building the DCN driver if long double is 128-bits by default. The bisection in commit d11219ad53dc must have gone off the rails at some point, the build failure occurs all the way back to the original commit that enabled DCN support on powerpc, at least with some toolchains. Depends-on: d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine") Fixes: 16a9dea110a6 ("amdgpu: Enable initial DCN support on POWER") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dan Horák <dan@danny.cz> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2100 Link: https://lore.kernel.org/r/20220725123918.1903255-1-mpe@ellerman.id.au
2022-07-25intel_idle: Fix false positive RCU splats due to incorrect hardirqs stateWaiman Long
Commit 32d4fd5751ea ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE") uses raw_local_irq_enable/local_irq_disable() around call to __intel_idle() in intel_idle_irq(). With interrupt enabled, timer tick interrupt can happen and a subsequently call to __do_softirq() may change the lockdep hardirqs state of a debug kernel back to 'on'. This will result in a mismatch between the cpu hardirqs state (off) and the lockdep hardirqs state (on) causing a number of false positive "WARNING: suspicious RCU usage" splats. Fix that by using local_irq_disable() to disable interrupt in intel_idle_irq(). Fixes: 32d4fd5751ea ("cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE") Signed-off-by: Waiman Long <longman@redhat.com> Cc: 5.16+ <stable@vger.kernel.org> # 5.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-25drm/i915/reset: Add additional steps for Wa_22011802037 for execlist backendUmesh Nerlige Ramappa
For execlists backend, current implementation of Wa_22011802037 is to stop the CS before doing a reset of the engine. This WA was further extended to wait for any pending MI FORCE WAKEUPs before issuing a reset. Add the extended steps in the execlist path of reset. In addition, extend the WA to gen11. v2: (Tvrtko) - Clarify comments, commit message, fix typos - Use IS_GRAPHICS_VER for gen 11/12 checks v3: (Daneile) - Drop changes to intel_ring_submission since WA does not apply to it - Log an error if MSG IDLE is not defined for an engine Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: f6aa0d713c88 ("drm/i915: Add Wa_22011802037 force cs halt") Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 0667429ce68e0b08f9f1fec8fd0b1f57228f605e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-07-25Merge branch 'net-sysctl-races-part-6'David S. Miller
Kuniyuki Iwashima says: ==================== sysctl: Fix data-races around ipv4_net_table (Round 6, Final). This series fixes data-races around 11 knobs after tcp_pacing_ss_ratio ipv4_net_table, and this is the final round for ipv4_net_table. While at it, other data-races around these related knobs are fixed. - decnet_mem - decnet_rmem - tipc_rmem There are still 58 tables possibly missing some fixes under net/. $ grep -rnE "struct ctl_table.*?\[\] =" net/ | wc -l 60 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25ipv4: Fix data-races around sysctl_fib_notify_on_flag_change.Kuniyuki Iwashima
While reading sysctl_fib_notify_on_flag_change, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix data-races around sysctl_tcp_reflect_tos.Kuniyuki Iwashima
While reading sysctl_tcp_reflect_tos, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix a data-race around sysctl_tcp_comp_sack_nr.Kuniyuki Iwashima
While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 9c21d2fc41c0 ("tcp: add tcp_comp_sack_nr sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix a data-race around sysctl_tcp_comp_sack_slack_ns.Kuniyuki Iwashima
While reading sysctl_tcp_comp_sack_slack_ns, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: a70437cc09a1 ("tcp: add hrtimer slack to sack compression") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix a data-race around sysctl_tcp_comp_sack_delay_ns.Kuniyuki Iwashima
While reading sysctl_tcp_comp_sack_delay_ns, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6d82aa242092 ("tcp: add tcp_comp_sack_delay_ns sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: Fix data-races around sysctl_[rw]mem(_offset)?.Kuniyuki Iwashima
While reading these sysctl variables, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - .sysctl_rmem - .sysctl_rwmem - .sysctl_rmem_offset - .sysctl_wmem_offset - sysctl_tcp_rmem[1, 2] - sysctl_tcp_wmem[1, 2] - sysctl_decnet_rmem[1] - sysctl_decnet_wmem[1] - sysctl_tipc_rmem[1] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix data-races around sk_pacing_rate.Kuniyuki Iwashima
While reading sysctl_tcp_pacing_(ss|ca)_ratio, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 43e122b014c9 ("tcp: refine pacing rate determination") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: mld: fix reference count leak in mld_{query | report}_work()Taehee Yoo
mld_{query | report}_work() processes queued events. If there are too many events in the queue, it re-queue a work. And then, it returns without in6_dev_put(). But if queuing is failed, it should call in6_dev_put(), but it doesn't. So, a reference count leak would occur. THREAD0 THREAD1 mld_report_work() spin_lock_bh() if (!mod_delayed_work()) in6_dev_hold(); spin_unlock_bh() spin_lock_bh() schedule_delayed_work() spin_unlock_bh() Script to reproduce(by Hangbin Liu): ip netns add ns1 ip netns add ns2 ip netns exec ns1 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip netns exec ns2 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip -n ns1 link add veth0 type veth peer name veth0 netns ns2 ip -n ns1 link set veth0 up ip -n ns2 link set veth0 up for i in `seq 50`; do for j in `seq 100`; do ip -n ns1 addr add 2021:${i}::${j}/64 dev veth0 ip -n ns2 addr add 2022:${i}::${j}/64 dev veth0 done done modprobe -r veth ip -a netns del splat looks like: unregister_netdevice: waiting for veth0 to become free. Usage count = 2 leaked reference. ipv6_add_dev+0x324/0xec0 addrconf_notify+0x481/0xd10 raw_notifier_call_chain+0xe3/0x120 call_netdevice_notifiers+0x106/0x160 register_netdevice+0x114c/0x16b0 veth_newlink+0x48b/0xa50 [veth] rtnl_newlink+0x11a2/0x1a40 rtnetlink_rcv_msg+0x63f/0xc00 netlink_rcv_skb+0x1df/0x3e0 netlink_unicast+0x5de/0x850 netlink_sendmsg+0x6c9/0xa90 ____sys_sendmsg+0x76a/0x780 __sys_sendmsg+0x27c/0x340 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Tested-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: f185de28d9ae ("mld: add new workqueues for process mld events") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: macsec: fix potential resource leak in macsec_add_rxsa() and ↵Jianglei Nie
macsec_add_txsa() init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25Merge branch 'macsec-config-issues'David S. Miller
Sabrina Dubroca says: ==================== macsec: fix config issues The patch adding netlink support for XPN (commit 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")) introduced several issues, including a kernel panic reported at [1]. Reproducing those bugs with upstream iproute is limited, since iproute doesn't currently support XPN. I'm also working on this. [1] https://bugzilla.kernel.org/show_bug.cgi?id=208315 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: always read MACSEC_SA_ATTR_PN as a u64Sabrina Dubroca
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: limit replay window size with XPNSabrina Dubroca
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: fix error message in macsec_add_rxsa and _txsaSabrina Dubroca
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: fix NULL deref in macsec_add_rxsaSabrina Dubroca
Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but nothing guarantees that it's not NULL at this point. The same code was added to macsec_add_txsa, but there it's not a problem because validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is present. Note: it's not possible to reproduce with iproute, because iproute doesn't allow creating an SA without specifying the PN. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315 Reported-by: Frantisek Sumsal <fsumsal@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 23:53:24 +0000