| Age | Commit message (Collapse) | Author |
|---|
|
Change the "BUG" to "WARNING" and disable the message because it triggers
occasionally in spite of the check in flush_cache_page_if_present.
The pte value extracted for the "from" page in copy_user_highpage is racy and
occasionally the pte is cleared before the flush is complete. I assume that
the page is simultaneously flushed by flush_cache_mm before the pte is cleared
as nullifying the fdc doesn't seem to cause problems.
I investigated various locking scenarios but I wasn't able to find a way to
sequence the flushes. This code is called for every COW break and locks impact
performance.
This patch is related to the bigger cache flush patch because we need the pte
on PA8800/PA8900 to flush using the vma context.
I have also seen this from copy_to_user_page and copy_from_user_page.
The messages appear infrequently when enabled.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
clk_generated_best_diff() helps in finding the parent and the divisor to
compute a rate closest to the required one. However, it doesn't take into
account the request's range for the new rate. Make sure the new rate
is within the required range.
Fixes: 8a8f4bf0c480 ("clk: at91: clk-generated: create function to find best_diff")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220413071318.244912-1-codrin.ciubotariu@microchip.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Not calling the function for dummy contexts will cause the context to
not be reset. During the next syscall, this will cause an error in
__audit_syscall_entry:
WARN_ON(context->context != AUDIT_CTX_UNUSED);
WARN_ON(context->name_count);
if (context->context != AUDIT_CTX_UNUSED || context->name_count) {
audit_panic("unrecoverable error in audit_syscall_entry()");
return;
}
These problematic dummy contexts are created via the following call
chain:
exit_to_user_mode_prepare
-> arch_do_signal_or_restart
-> get_signal
-> task_work_run
-> tctx_task_work
-> io_req_task_submit
-> io_issue_sqe
-> audit_uring_entry
Cc: stable@vger.kernel.org
Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring")
Signed-off-by: Julian Orth <ju.orth@gmail.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
We gate whether to IOPOLL for a request on whether the opcode is allowed
on a ring setup for IOPOLL and if it's got a file assigned. MSG_RING
is the only one that allows a file yet isn't pollable, it's merely
supported to allow communication on an IOPOLL ring, not because we can
poll for completion of it.
Put the assigned file early and clear it, so we don't attempt to poll
for it.
Reported-by: syzbot+1a0a53300ce782f8b3ad@syzkaller.appspotmail.com
Fixes: 3f1d52abf098 ("io_uring: defer msg-ring file validity check until command issue")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adaptive-rx and Adaptive-tx are interrupt moderation settings
that can be enabled/disabled using ethtool:
ethtool -C ethX adaptive-rx on/off adaptive-tx on/off
Unfortunately those settings are getting cleared after
changing number of queues, or in ethtool world 'channels':
ethtool -L ethX rx 1 tx 1
Clearing was happening due to introduction of bit fields
in ice_ring_container struct. This way only itr_setting
bits were rebuilt during ice_vsi_rebuild_set_coalesce().
Introduce an anonymous struct of bitfields and create a
union to refer to them as a single variable.
This way variable can be easily saved and restored.
Fixes: 61dc79ced7aa ("ice: Restore interrupt throttle settings after VSI rebuild")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The hardware statistics counters are not cleared during resets so the
drivers first access is to initialize the baseline and then subsequent
reads are for reporting the counters. The statistics counters are read
during the watchdog subtask when the interface is up. If the baseline
is not initialized before the interface is up, then there can be a brief
window in which some traffic can be transmitted/received before the
initial baseline reading takes place.
Directly initialize ethtool statistics in driver open so the baseline will
be initialized when the interface is up, and any dropped packets
incremented before the interface is up won't be reported.
Fixes: 28dc1b86f8ea9 ("ice: ignore dropped packets during init")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Do not allow to write timestamps on RX rings if PF is being configured.
When PF is being configured RX rings can be freed or rebuilt. If at the
same time timestamps are updated, the kernel will crash by dereferencing
null RX ring pointer.
PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51"
#0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be
#1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d
#2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd
#3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54
#4 [ff1966a94a713d08] no_context at ffffffff9d06bda4
#5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c
#6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4
#7 [ff1966a94a713de0] page_fault at ffffffff9da0107e
[exception RIP: ice_ptp_update_cached_phctime+91]
RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246
RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000
R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648
R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice]
#9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b
#10 [ff1966a94a713f10] kthread at ffffffff9d101b4d
#11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Dave Cain <dcain@redhat.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.18, take #3
- Correctly expose GICv3 support even if no irqchip is created
so that userspace doesn't observe it changing pointlessly
(fixing a regression with QEMU)
- Don't issue a hypercall to set the id-mapped vectors when
protected mode is enabled (fix for pKVM in combination with
CPUs affected by Spectre-v3a)
|
|
As an optimisation, only pages mapped with PROT_MTE in user space have
the MTE tags zeroed. This is done lazily at the set_pte_at() time via
mte_sync_tags(). However, this function is missing a barrier and another
CPU may see the PTE updated before the zeroed tags are visible. Add an
smp_wmb() barrier if the mapping is Normal Tagged.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 34bfeea4a9e9 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20220517093532.127095-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In arm64_relocate_new_kernel() we load some fields out of the kimage
structure after relocation has occurred. As the kimage structure isn't
allocated to be relocation-safe, it may be clobbered during relocation,
and we may load junk values out of the structure.
Due to this, kexec may fail when the kimage allocation happens to fall
within a PA range that an object will be relocated to. This has been
observed to occur for regular kexec on a QEMU TCG 'virt' machine with
2GiB of RAM, where the PA range of the new kernel image overlaps the
kimage structure.
Avoid this by ensuring we load all values from the kimage structure
prior to relocation.
I've tested this atop v5.16 and v5.18-rc6.
Fixes: 878fdbd70486 ("arm64: kexec: pass kimage as the only argument to relocation function")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20220516160735.731404-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
During hotplug, the stolen time data structure is unmapped and memset.
There is a possibility of the timer IRQ being triggered before memset
and stolen time is getting updated as part of this timer IRQ handler. This
causes the below crash in timer handler -
[ 3457.473139][ C5] Unable to handle kernel paging request at virtual address ffffffc03df05148
...
[ 3458.154398][ C5] Call trace:
[ 3458.157648][ C5] para_steal_clock+0x30/0x50
[ 3458.162319][ C5] irqtime_account_process_tick+0x30/0x194
[ 3458.168148][ C5] account_process_tick+0x3c/0x280
[ 3458.173274][ C5] update_process_times+0x5c/0xf4
[ 3458.178311][ C5] tick_sched_timer+0x180/0x384
[ 3458.183164][ C5] __run_hrtimer+0x160/0x57c
[ 3458.187744][ C5] hrtimer_interrupt+0x258/0x684
[ 3458.192698][ C5] arch_timer_handler_virt+0x5c/0xa0
[ 3458.198002][ C5] handle_percpu_devid_irq+0xdc/0x414
[ 3458.203385][ C5] handle_domain_irq+0xa8/0x168
[ 3458.208241][ C5] gic_handle_irq.34493+0x54/0x244
[ 3458.213359][ C5] call_on_irq_stack+0x40/0x70
[ 3458.218125][ C5] do_interrupt_handler+0x60/0x9c
[ 3458.223156][ C5] el1_interrupt+0x34/0x64
[ 3458.227560][ C5] el1h_64_irq_handler+0x1c/0x2c
[ 3458.232503][ C5] el1h_64_irq+0x7c/0x80
[ 3458.236736][ C5] free_vmap_area_noflush+0x108/0x39c
[ 3458.242126][ C5] remove_vm_area+0xbc/0x118
[ 3458.246714][ C5] vm_remove_mappings+0x48/0x2a4
[ 3458.251656][ C5] __vunmap+0x154/0x278
[ 3458.255796][ C5] stolen_time_cpu_down_prepare+0xc0/0xd8
[ 3458.261542][ C5] cpuhp_invoke_callback+0x248/0xc34
[ 3458.266842][ C5] cpuhp_thread_fun+0x1c4/0x248
[ 3458.271696][ C5] smpboot_thread_fn+0x1b0/0x400
[ 3458.276638][ C5] kthread+0x17c/0x1e0
[ 3458.280691][ C5] ret_from_fork+0x10/0x20
As a fix, introduce rcu lock to update stolen time structure.
Fixes: 75df529bec91 ("arm64: paravirt: Initialize steal time when cpu is online")
Cc: stable@vger.kernel.org
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Link: https://lore.kernel.org/r/20220513174654.362169-1-quic_eberman@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
spin_lock_irq/spin_unlock_irq contains preempt_disable/enable().
Which can serve as RCU read-side critical region, so remove
rcu_read_lock/unlock().
Signed-off-by: Fanjun Kong <bh1scw@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220516173930.159535-1-bh1scw@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the removal of seq_get_buf in blkcg_print_one_stat, we
cannot make adding the newline conditional on there being
relevant stats because the name was already written out
unconditionally.
Otherwise we may end up with multiple device names in one
line which is confusing and doesn't follow the nested-keyed
file format.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Fixes: 252c651a4c85 ("blk-cgroup: stop using seq_get_buf")
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220111083159.42340-1-w.bumiller@proxmox.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The typedefs u32 and u64 are not available in userspace. Thus user get
an error he try to use DMA_BUF_SET_NAME_A or DMA_BUF_SET_NAME_B:
$ gcc -Wall -c -MMD -c -o ioctls_list.o ioctls_list.c
In file included from /usr/include/x86_64-linux-gnu/asm/ioctl.h:1,
from /usr/include/linux/ioctl.h:5,
from /usr/include/asm-generic/ioctls.h:5,
from ioctls_list.c:11:
ioctls_list.c:463:29: error: ‘u32’ undeclared here (not in a function)
463 | { "DMA_BUF_SET_NAME_A", DMA_BUF_SET_NAME_A, -1, -1 }, // linux/dma-buf.h
| ^~~~~~~~~~~~~~~~~~
ioctls_list.c:464:29: error: ‘u64’ undeclared here (not in a function)
464 | { "DMA_BUF_SET_NAME_B", DMA_BUF_SET_NAME_B, -1, -1 }, // linux/dma-buf.h
| ^~~~~~~~~~~~~~~~~~
The issue was initially reported here[1].
[1]: https://github.com/jerome-pouiller/ioctl/pull/14
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: a5bff92eaac4 ("dma-buf: Fix SET_NAME ioctl uapi")
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220517072708.245265-1-Jerome.Pouiller@silabs.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
In vmxnet3_rq_create(), when dma_alloc_coherent() fails,
vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then
vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all()
-> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls
vmxnet3_force_close() -> dev_close() in error handling code. And the driver
calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all()
-> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(),
rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing
a NULL pointer dereference.
To fix this possible bug, an if statement is added to check whether
rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so.
The error log in our fault-injection testing is shown as follows:
[ 65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008
...
[ 65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3]
...
[ 65.227977] Call Trace:
...
[ 65.228262] vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3]
[ 65.228580] vmxnet3_close+0x2c4/0x3f0 [vmxnet3]
[ 65.228866] __dev_close_many+0x288/0x350
[ 65.229607] dev_close_many+0xa4/0x480
[ 65.231124] dev_close+0x138/0x230
[ 65.231933] vmxnet3_force_close+0x1f0/0x240 [vmxnet3]
[ 65.232248] vmxnet3_change_mtu+0x75d/0x920 [vmxnet3]
...
Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Link: https://lore.kernel.org/r/20220514050711.2636709-1-r33s3n6@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is
freed immediately. Similarly, in another branch, when dma_map_page() fails,
rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf()
returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all()
-> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls
vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page
are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs.
To fix these possible bugs, rbi->skb and rbi->page should be cleared after
they are freed.
The error log in our fault-injection testing is shown as follows:
[ 14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150
...
[ 14.321586] Call Trace:
...
[ 14.325357] consume_skb+0x2f/0x150
[ 14.325671] vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3]
[ 14.326150] vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3]
[ 14.326616] vmxnet3_open+0x387/0x470 [vmxnet3]
...
[ 14.361675] Allocated by task 351:
...
[ 14.362688] __netdev_alloc_skb+0x1b3/0x6f0
[ 14.362960] vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3]
[ 14.363317] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3]
[ 14.363661] vmxnet3_open+0x387/0x470 [vmxnet3]
...
[ 14.367309]
[ 14.367412] Freed by task 351:
...
[ 14.368932] __dev_kfree_skb_any+0xd2/0xe0
[ 14.369193] vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3]
[ 14.369544] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3]
[ 14.369883] vmxnet3_open+0x387/0x470 [vmxnet3]
[ 14.370174] __dev_open+0x28a/0x420
[ 14.370399] __dev_change_flags+0x192/0x590
[ 14.370667] dev_change_flags+0x7a/0x180
[ 14.370919] do_setlink+0xb28/0x3570
[ 14.371150] rtnl_newlink+0x1160/0x1740
[ 14.371399] rtnetlink_rcv_msg+0x5bf/0xa50
[ 14.371661] netlink_rcv_skb+0x1cd/0x3e0
[ 14.371913] netlink_unicast+0x5dc/0x840
[ 14.372169] netlink_sendmsg+0x856/0xc40
[ 14.372420] ____sys_sendmsg+0x8a7/0x8d0
[ 14.372673] __sys_sendmsg+0x1c2/0x270
[ 14.372914] do_syscall_64+0x41/0x90
[ 14.373145] entry_SYSCALL_64_after_hwframe+0x44/0xae
...
Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Link: https://lore.kernel.org/r/20220514050656.2636588-1-r33s3n6@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The global blackhole_netdev has replaced pernet loopback_dev to become the
one given to the object that holds an netdev when ifdown in many places of
ipv4 and ipv6 since commit 8d7017fd621d ("blackhole_netdev: use
blackhole_netdev to invalidate dst entries").
Especially after commit faab39f63c1f ("net: allow out-of-order netdev
unregistration"), it's no longer safe to use loopback_dev that may be
freed before other netdev.
This patch is to set dst dev to blackhole_netdev instead of loopback_dev
in ifdown.
v1->v2:
- add Fixes tag as Eric suggested.
Fixes: faab39f63c1f ("net: allow out-of-order netdev unregistration")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/e8c87482998ca6fcdab214f5a9d582899ec0c648.1652665047.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
if devm_clk_get_optional() fails, we still need to go through the error
handling path.
Add the missing goto.
Fixes: 6328a126896ea ("net: systemport: Manage Wake-on-LAN clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/99d70634a81c229885ae9e4ee69b2035749f7edc.1652634040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The following two scenarios were failing for lan966x.
1. If the port had the address X and then trying to assign the same
address, then the HW was just removing this address because first it
tries to learn new address and then delete the old one. As they are
the same the HW remove it.
2. If the port eth0 was assigned the same address as one of the other
ports eth1 then when assigning back the address to eth0 then the HW
was deleting the address of eth1.
The case 1. is fixed by checking if the port has already the same
address while case 2. is fixed by checking if the address is used by any
other port.
Fixes: e18aba8941b40b ("net: lan966x: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220513180030.3076793-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 1738890a3165ccd0da98ebd3e2d5f9b230d5afa8.
Commit 1738890a3165 ("clk: sunxi-ng: sun6i-rtc: Add support for H6")
breaks HDMI output on Tanix TX6 mini board. Exact reason isn't known,
but because that commit doesn't actually improve anything, let's just
revert it.
Cc: stable@vger.kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220511200206.2458274-1-jernej.skrabec@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable")
accidentially breaks the behavior of bcm2835_clock_choose_div() and
booting of Raspberry Pi. The removed do_div macro call had side effects,
so we need to restore it.
Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220428183010.1635248-1-stefan.wahren@i2se.com
Tested-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Instead of having one big enum add one for each register or field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
This reverts commit 1571d67dc190e50c6c56e8f88cdc39f7cc53166e.
This commit broke support for setting interrupt affinity. It looks like
that it is related to the chained IRQ handler. Revert this commit until
issue with setting interrupt affinity is fixed.
Fixes: 1571d67dc190 ("PCI: aardvark: Rewrite IRQ code to chained IRQ handler")
Link: https://lore.kernel.org/r/20220515125815.30157-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
delta_ns is a s64, but it was being passed ptp_ocp_adjtime_coarse
as an u64. Also, it turns out that timespec64_add_ns() only handles
positive values, so perform the math with set_normalized_timespec().
Fixes: 90f8f4c0e3ce ("ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments")
Suggested-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/20220513225231.1412-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bfq_has_work() is using busy_queues currently, which is not accurate
because bfq_queue is busy doesn't represent that it has requests. Since
bfqd aready has a counter 'queued' to record how many requests are in
bfq, use it instead of busy_queues.
Noted that bfq_has_work() can be called with 'bfqd->lock' held, thus the
lock can't be held in bfq_has_work() to protect 'bfqd->queued'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220513023507.2625717-3-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If bfq_schedule_dispatch() is called from bfq_idle_slice_timer_body(),
then 'bfqd->queued' is read without holding 'bfqd->lock'. This is
wrong since it can be wrote concurrently.
Fix the problem by holding 'bfqd->lock' in such case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220513023507.2625717-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
submit_bio uses some extremely convoluted checks and confusing comments
to only account REQ_OP_READ/REQ_OP_WRITE comments. Just switch to the
plain obvious checks instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220516063654.2782792-1-hch@lst.de
[axboe: fixup WRITE -> REQ_OP_WRITE]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When userspace closes the socket before sending a disconnect
request, the following I/O requests will be blocked in
wait_for_reconnect() until dead timeout. This will cause the
following disconnect request also hung on blk_mq_quiesce_queue().
That means we have no way to disconnect a nbd device if there
are some I/O requests waiting for reconnecting until dead timeout.
It's not expected. So let's wake up the thread waiting for
reconnecting directly when a disconnect request is sent.
Reported-by: Xu Jianhai <zero.xu@bytedance.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20220322080639.142-1-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ERROR check is already in clk_disable() and clk_unprepare() by using
IS_ERR_OR_NULL. Remove unneeded ERROR check for ftide->pclk here.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
When running a combination of PPPoE on top of a VLAN, we need to set
info->outdev to the PPPoE device, otherwise PPPoE encap is skipped
during software offload.
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When calling dev_fill_forward_path on a pppoe device, the provided destination
address is invalid. In order for the bridge fdb lookup to succeed, the pppoe
code needs to update ctx->daddr to the correct value.
Fix this by storing the address inside struct net_device_path_ctx
Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The dst entry does not contain a valid hardware address, so skip the lookup
in order to avoid running into errors here.
The proper hardware address is filled in from nft_dev_path_info
Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If a flow cannot be offloaded, the code currently repeatedly tries again as
quickly as possible, which can significantly increase system load.
Fix this by limiting flow timeout update and hardware offload retry to once
per second.
Fixes: c07531c01d82 ("netfilter: flowtable: Remove redundant hw refresh bit")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot was able to trigger an Out-of-Bound on the pedit action:
UBSAN: shift-out-of-bounds in net/sched/act_pedit.c:238:43
shift exponent 1400735974 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 3606 Comm: syz-executor151 Not tainted 5.18.0-rc5-syzkaller-00165-g810c2f0a3f86 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x50 lib/ubsan.c:151
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x187 lib/ubsan.c:322
tcf_pedit_init.cold+0x1a/0x1f net/sched/act_pedit.c:238
tcf_action_init_1+0x414/0x690 net/sched/act_api.c:1367
tcf_action_init+0x530/0x8d0 net/sched/act_api.c:1432
tcf_action_add+0xf9/0x480 net/sched/act_api.c:1956
tc_ctl_action+0x346/0x470 net/sched/act_api.c:2015
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5993
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e2/0x800 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fe36e9e1b59
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffef796fe88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe36e9e1b59
RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
RBP: 00007fe36e9a5d00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe36e9a5d90
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The 'shift' field is not validated, and any value above 31 will
trigger out-of-bounds. The issue predates the git history, but
syzbot was able to trigger it only after the commit mentioned in
the fixes tag, and this change only applies on top of such commit.
Address the issue bounding the 'shift' value to the maximum allowed
by the relevant operator.
Reported-and-tested-by: syzbot+8ed8fc4c57e9dcf23ca6@syzkaller.appspotmail.com
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At cleaning up and moving the device rename from the quirk table to
its own table, we removed the entry for Rane SL-1 as we thought it's
only for renaming. It turned out, however, that the quirk is required
for matching with the device that declares itself as no standard
audio but only as vendor-specific.
Restore the quirk entry for Rane SL-1 to fix the regression.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887
Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220516103112.12950-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-05-14
this is a pull request of 2 patches for net/master.
Changes to linux-can-fixes-for-5.18-20220513:
- adjusted Fixes: Tag on "Revert "can: m_can: pci: use custom bit timings for Elkhart Lake""
(Thanks Jakub)
Both patches are by Jarkko Nikula, target the m_can PCI driver
bindings, and fix usage of wrong bit timing constants for the Elkhart
Lake platform.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220513121648.28584-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In IPv4 setting the "disable_policy" flag on a device means no policy
should be enforced for traffic originating from the device. This was
implemented by seting the DST_NOPOLICY flag in the dst based on the
originating device.
However, dsts are cached in nexthops regardless of the originating
devices, in which case, the DST_NOPOLICY flag value may be incorrect.
Consider the following setup:
+------------------------------+
| ROUTER |
+-------------+ | +-----------------+ |
| ipsec src |----|-|ipsec0 | |
+-------------+ | |disable_policy=0 | +----+ |
| +-----------------+ |eth1|-|-----
+-------------+ | +-----------------+ +----+ |
| noipsec src |----|-|eth0 | |
+-------------+ | |disable_policy=1 | |
| +-----------------+ |
+------------------------------+
Where ROUTER has a default route towards eth1.
dst entries for traffic arriving from eth0 would have DST_NOPOLICY
and would be cached and therefore can be reused by traffic originating
from ipsec0, skipping policy check.
Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead
of the DST in IN/FWD IPv4 policy checks.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
There are 2 ways an engine can get reset in i915 and the method of reset
affects how KMD labels a context as guilty/innocent.
(1) GuC initiated engine-reset: GuC resets a hung engine and notifies
KMD. The context that hung on the engine is marked guilty and all other
contexts are innocent. The innocent contexts are resubmitted.
(2) GT based reset: When an engine heartbeat fails to tick, KMD
initiates a gt/chip reset. All active contexts are marked as guilty and
discarded.
In order to correctly mark the contexts as guilty/innocent, pass a mask
of engines that were reset to __guc_reset_context.
Fixes: eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 303760aa914b7f5ac9602dbb4b471a2ad52eeb3e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Bspec has added some steps that check forDMC MMIO range before
programming them
v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)
BSpec: 49193
Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com
(cherry picked from commit 21c47196aec3a93f913a7515e1e7b30e6c54d6c6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The RDAMA and TCP transport both complete the timed out request in the
same manner and hence code is duplicated. Add and use the helper
nvmf_complete_timed_out_request() to remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
On our ZynqMP system we observe, that a NVMe drive that resets itself
while doing a firmware update causes a Kernel crash like this:
[ 67.720772] pcieport 0000:02:02.0: pciehp: Slot(2): Link Down
[ 67.720783] pcieport 0000:02:02.0: pciehp: Slot(2): Card not present
[ 67.720795] nvme 0000:04:00.0: PME# disabled
[ 67.720849] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[ 67.720853] nwl-pcie fd0e0000.pcie: Slave error
Analysis: When nvme_dev_disable() is called because of this PCIe hotplug
event, pci_is_enabled() is still true. And accessing the NVMe drive
which is currently not available as it's in reboot process causes this
"synchronous external abort" on this ARM64 platform.
This patch adds the pci_device_is_present() check as well, which returns
false in this "Card not present" hot-plug case. With this change, the
NVMe driver does not try to access the NVMe registers any more and the
FW update finishes without any problems.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
nvme_dev_disable()
nvme_suspend_queue(&dev->queues[0]).
Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad / NULL pointer dereference.
Signed-off-by: Kyle Smith <kyles@hpe.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Most of the internal passthru commands use __nvme_submit_sync_cmd()
interface. There are few places we open code the request submission :-
1. nvme_keep_alive_work(struct work_struct *work)
2. nvme_timeout(struct request *req, bool reserved)
3. nvme_delete_queue(struct nvme_queue *nvmeq, u8 opcode)
Mark the internal passthru request quiet so that we can skip the verbose
error message from nvme_log_error() in nvme_end_req() completion path,
this will be consistent with what we have in __nvme_submit_sync_cmd().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
No usage of blkdev.h elements.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Log a few more path related status codes.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nvme specification only requires qword alignment for segment
descriptors, and the driver already guarantees that. The spec has always
allowed user data to be dword aligned, which is what the queue's
attribute is for, so relax the alignment requirement to that value.
While we could allow byte alignment for some controllers when using
SGLs, we still need to support PRP, and that only allows dword.
Fixes: 3b2a1ebceba3 ("nvme: set dma alignment to qword")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
DMRSLl is in the unit of logical blocks, while max_discard_sectors is
in the unit of "linux sector".
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
|
|
The TODO list in drivers/cdrom/cdrom.c has a single entry containing
obsolete information, unchanged since the first git commit over 17 years
ago, and probably longer. Remove this list from the comment to prevent
confusion in future.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220515205833.944139-6-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
