summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-14drm/amdgpu: fix the hw hang during perform system reboot and resetPrike Liang
The system reboot failed as some IP blocks enter power gate before perform hw resource destory. Meanwhile use unify interface to set device CGPG to ungate state can simplify the amdgpu poweroff or reset ungate guard. Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-04-14x86/microcode/AMD: Increase microcode PATCH_MAX_SIZEJohn Allen
Future AMD CPUs will have microcode patches that exceed the default 4K patch size. Raise our limit. Signed-off-by: John Allen <john.allen@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v4.14.. Link: https://lkml.kernel.org/r/20200409152931.GA685273@mojo.amd.com
2020-04-14ALSA: hda: call runtime_allow() for all hda controllersHui Wang
Before the pci_driver->probe() is called, the pci subsystem calls runtime_forbid() and runtime_get_sync() on this pci dev, so only call runtime_put_autosuspend() is not enough to enable the runtime_pm on this device. For controllers with vgaswitcheroo feature, the pci/quirks.c will call runtime_allow() for this dev, then the controllers could enter rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like Intel hda controllers, the runtime_pm is not enabled because the runtime_allow() is not called. Since it is no harm calling runtime_allow() twice, here let hda driver call runtime_allow() for all controllers. Then the runtime_pm is enabled on all controllers after the put_autosuspend() is called. Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-14tools headers: Synchronize linux/bits.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in these csets: 295bcca84916 ("linux/bits.h: add compile time sanity check of GENMASK inputs") 3945ff37d2f4 ("linux/bits.h: Extract common header for vDSO") To address this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h' diff -u tools/include/linux/bits.h include/linux/bits.h This clashes with usage of userspace's static_assert(), that, at least on glibc, is guarded by a ifnded/endif pair, do the same to our copy of build_bug.h and avoid that diff in check_headers.sh so that we continue checking for drifts with the kernel sources master copy. This will all be tested with the set of build containers that includes uCLibc, musl libc, lots of glibc versions in lots of distros and cross build environments. The tools/objtool, tools/bpf, etc were tested as well. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers: Adopt verbatim copy of compiletime_assert() from kernel sourcesArnaldo Carvalho de Melo
Will be needed when syncing the linux/bits.h header, in the next cset. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers: Update x86's syscall_64.tbl with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: d3b1b776eefc ("x86/entry/64: Remove ptregs qualifier from syscall table") cab56d3484d4 ("x86/entry: Remove ABI prefixes from functions in syscall tables") 27dd84fafcd5 ("x86/entry/64: Use syscall wrappers for x32_rt_sigreturn") Addressing this tools/perf build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl That didn't result in any tooling changes, as what is extracted are just the first two columns, and these patches touched only the third. $ cp /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp $ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build DESCEND plugins CC /tmp/build/perf/util/syscalltbl.o INSTALL trace_plugins LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp/syscalls_64.c $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the change in: 88be76cdafc7 ("drm/i915: Allow userspace to specify ringsize on construction") That don't result in any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Update tools's copy of drm.h headersArnaldo Carvalho de Melo
Picking the changes from: 455e00f1412f ("drm: Add getfb2 ioctl") Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated tables will be able to translate this new ioctl code into a string: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after --- before 2020-04-14 09:28:45.461821077 -0300 +++ after 2020-04-14 09:28:53.594782685 -0300 @@ -107,6 +107,7 @@ [0xCB] = "SYNCOBJ_QUERY", [0xCC] = "SYNCOBJ_TRANSFER", [0xCD] = "SYNCOBJ_TIMELINE_SIGNAL", + [0xCE] = "MODE_GETFB2", [DRM_COMMAND_BASE + 0x00] = "I915_INIT", [DRM_COMMAND_BASE + 0x01] = "I915_FLUSH", [DRM_COMMAND_BASE + 0x02] = "I915_FLIP", $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Stone <daniels@collabora.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers kvm: Sync linux/kvm.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from: 9a5788c615f5 ("KVM: PPC: Book3S HV: Add a capability for enabling secure guests") 3c9bd4006bfc ("KVM: x86: enable dirty log gradually in small chunks") 13da9ae1cdbf ("KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED") e0d2773d487c ("KVM: s390: protvirt: UV calls in support of diag308 0, 1") 19e122776886 ("KVM: S390: protvirt: Introduce instruction data area bounce buffer") 29b40f105ec8 ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling") So far we're ignoring those arch specific ioctls, we need to revisit this at some time to have arch specific tables, etc: $ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \ $ This addresses these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h' diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jay Zhou <jianjay.zhou@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync linux/fscrypt.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: e98ad464750c ("fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl") That don't trigger any changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h' diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h In time we should come up with something like: $ tools/perf/trace/beauty/fsconfig.sh static const char *fsconfig_cmds[] = { [0] = "SET_FLAG", [1] = "SET_STRING", [2] = "SET_BINARY", [3] = "SET_PATH", [4] = "SET_PATH_EMPTY", [5] = "SET_FD", [6] = "CMD_CREATE", [7] = "CMD_RECONFIGURE", }; $ And: $ tools/perf/trace/beauty/drm_ioctl.sh | head #ifndef DRM_COMMAND_BASE #define DRM_COMMAND_BASE 0x40 #endif static const char *drm_ioctl_cmds[] = { [0x00] = "VERSION", [0x01] = "GET_UNIQUE", [0x02] = "GET_MAGIC", [0x03] = "IRQ_BUSID", [0x04] = "GET_MAP", [0x05] = "GET_CLIENT", $ For fscrypt's ioctls. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools include UAPI: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h This automatically picks these new ioctls, making tools such as 'perf trace' aware of them and possibly allowing to use the strings in filters, etc: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-04-14 09:12:28.559748968 -0300 +++ after 2020-04-14 09:12:38.781696242 -0300 @@ -24,9 +24,16 @@ [0x44] = "SCSI_GET_EVENTS_MISSED", [0x60] = "VSOCK_SET_GUEST_CID", [0x61] = "VSOCK_SET_RUNNING", + [0x72] = "VDPA_SET_STATUS", + [0x74] = "VDPA_SET_CONFIG", + [0x75] = "VDPA_SET_VRING_ENABLE", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", [0x12] = "GET_VRING_BASE", [0x26] = "GET_BACKEND_FEATURES", + [0x70] = "VDPA_GET_DEVICE_ID", + [0x71] = "VDPA_GET_STATUS", + [0x73] = "VDPA_GET_CONFIG", + [0x76] = "VDPA_GET_VRING_NUM", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant statusJuergen Gross
xenbus_map_ring_valloc() maps a ring page and returns the status of the used grant (0 meaning success). There are Xen hypervisors which might return the value 1 for the status of a failed grant mapping due to a bug. Some callers of xenbus_map_ring_valloc() test for errors by testing the returned status to be less than zero, resulting in no error detected and crashing later due to a not available ring page. Set the return value of xenbus_map_ring_valloc() to GNTST_general_error in case the grant status reported by Xen is greater than zero. This is part of XSA-316. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-04-14Merge tag 'gvt-fixes-2020-04-14' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi
drm-intel-fixes gvt-fixes-2020-04-14 - Fix guest page access by using VFIO dma r/w interface (Yan) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200414083626.GQ11247@zhen-hp.sh.intel.com
2020-04-14rtw88: avoid unused function warningsArnd Bergmann
The rtw88 driver defines emtpy functions with multiple indirections but gets one of these wrong: drivers/net/wireless/realtek/rtw88/pci.c:1347:12: error: 'rtw_pci_resume' defined but not used [-Werror=unused-function] 1347 | static int rtw_pci_resume(struct device *dev) | ^~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/pci.c:1342:12: error: 'rtw_pci_suspend' defined but not used [-Werror=unused-function] 1342 | static int rtw_pci_suspend(struct device *dev) Better simplify it to rely on the conditional reference in SIMPLE_DEV_PM_OPS(), and mark the functions as __maybe_unused to avoid warning about it. I'm not sure if these are needed at all given that the functions don't do anything, but they were only recently added. Fixes: 44bc17f7f5b3 ("rtw88: support wowlan feature for 8822c") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200408185413.218643-1-arnd@arndb.de
2020-04-14tools arch x86: Sync asm/cpufeatures.h with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from: 077168e241ec ("x86/mce/amd: Add PPIN support for AMD MCE") 753039ef8b2f ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too") 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") These don't cause any changes in tooling, just silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Wei Huang <wei.huang2@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync linux/mman.h with the kernelArnaldo Carvalho de Melo
To get the changes in: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Add that to 'perf trace's mremap 'flags' decoder. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers UAPI: Sync sched.h with the kernelArnaldo Carvalho de Melo
To get the changes in: ef2c41cf38a7 ("clone3: allow spawning processes into cgroups") Add that to 'perf trace's clone 'flags' decoder. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h' diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools headers: Update linux/vdso.h and grab a copy of vdso/const.hArnaldo Carvalho de Melo
To get in line with: 8165b57bca21 ("linux/const.h: Extract common header for vDSO") And silence this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/include/linux/const.h' differs from latest version at 'include/linux/const.h' diff -u tools/include/linux/const.h include/linux/const.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14perf stat: Fix no metric header if --per-socket and --metric-only setJin Yao
We received a report that was no metric header displayed if --per-socket and --metric-only were both set. It's hard for script to parse the perf-stat output. This patch fixes this issue. Before: root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket ^C Performance counter stats for 'system wide': S0 8 2.6 2.215270071 seconds time elapsed root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket -I1000 # time socket cpus 1.000411692 S0 8 2.2 2.001547952 S0 8 3.4 3.002446511 S0 8 3.4 4.003346157 S0 8 4.0 5.004245736 S0 8 0.3 After: root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket ^C Performance counter stats for 'system wide': CPI S0 8 2.1 1.813579830 seconds time elapsed root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket -I1000 # time socket cpus CPI 1.000415122 S0 8 3.2 2.001630051 S0 8 2.9 3.002612278 S0 8 4.3 4.003523594 S0 8 3.0 5.004504256 S0 8 3.7 Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200331180226.25915-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14perf python: Check if clang supports -fno-semantic-interpositionArnaldo Carvalho de Melo
The set of C compiler options used by distros to build python bindings may include options that are unknown to clang, we check for a variety of such options, add -fno-semantic-interposition to that mix: This fixes the build on, among others, Manjaro Linux: GEN /tmp/build/perf/python/perf.so clang-9: error: unknown argument: '-fno-semantic-interposition' error: command 'clang' failed with exit status 1 make: Leaving directory '/git/perf/tools/perf' [perfbuilder@602aed1c266d ~]$ gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: /build/gcc/src/gcc/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-pkgversion='Arch Linux 9.3.0-1' --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++,d --enable-shared --enable-threads=posix --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --enable-default-pie --enable-default-ssp --enable-cet=auto gdc_include_dir=/usr/include/dlang/gdc Thread model: posix gcc version 9.3.0 (Arch Linux 9.3.0-1) [perfbuilder@602aed1c266d ~]$ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes in: 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel") Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Which causes these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-04-01 12:11:14.789344795 -0300 +++ after 2020-04-01 12:11:56.907798879 -0300 @@ -10,6 +10,7 @@ [0x00000029] = "KNC_EVNTSEL1", [0x0000002a] = "IA32_EBL_CR_POWERON", [0x0000002c] = "EBC_FREQUENCY_ID", + [0x00000033] = "TEST_CTRL", [0x00000034] = "SMI_COUNT", [0x0000003a] = "IA32_FEAT_CTL", [0x0000003b] = "IA32_TSC_ADJUST", @@ -27,6 +28,7 @@ [0x000000c2] = "IA32_PERFCTR1", [0x000000cd] = "FSB_FREQ", [0x000000ce] = "PLATFORM_INFO", + [0x000000cf] = "IA32_CORE_CAPS", [0x000000e2] = "PKG_CST_CONFIG_CONTROL", [0x000000e7] = "IA32_MPERF", [0x000000e8] = "IA32_APERF", $ $ make -C tools/perf O=/tmp/build/perf install-bin <SNIP> CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> Now one can do: perf trace -e msr:* --filter=msr==IA32_CORE_CAPS or: perf trace -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' And see only those MSRs being accessed via: # perf trace -v -e msr:* --filter='msr==IA32_CORE_CAPS || msr==TEST_CTRL' New filter for msr:read_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:write_msr: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) New filter for msr:rdpmc: (msr==0xcf || msr==0x33) && (common_pid != 8263 && common_pid != 23250) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20200401153325.GC12534@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-14cfg80211: fix kernel-doc notationLothar Rubusch
Update missing kernel-doc annotations and fix of related warnings at 'make htmldocs'. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Link: https://lore.kernel.org/r/20200408231013.28370-1-l.rubusch@gmail.com [fix indentation, attribute references] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-14mac80211_hwsim: Use kstrndup() in place of kasprintf()Tuomas Tynkkynen
syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-14nl80211: fix NL80211_ATTR_FTM_RESPONDER policyJohannes Berg
The nested policy here should be established using the NLA_POLICY_NESTED() macro so the length is properly filled in. Cc: stable@vger.kernel.org Fixes: 81e54d08d9d8 ("cfg80211: support FTM responder configuration/statistics") Link: https://lore.kernel.org/r/20200412004029.9d0722bb56c8.Ie690bfcc4a1a61ff8d8ca7e475d59fcaa52fb2da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-14objtool: Make BP scratch register warning more robustJosh Poimboeuf
If func is NULL, a seg fault can result. This is a theoretical issue which was found by Coverity, ID: 1492002 ("Dereference after null check"). Fixes: c705cecc8431 ("objtool: Track original function across branches") Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/afc628693a37acd287e843bcc5c0430263d93c74.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Fix switch table detection in .text.unlikelyJosh Poimboeuf
If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Support Clang non-section symbols in ORC generationJosh Poimboeuf
When compiling the kernel with AS=clang, objtool produces a lot of warnings: warning: objtool: missing symbol for section .text warning: objtool: missing symbol for section .init.text warning: objtool: missing symbol for section .ref.text It then fails to generate the ORC table. The problem is that objtool assumes text section symbols always exist. But the Clang assembler is aggressive about removing them. When generating relocations for the ORC table, objtool always tries to reference instructions by their section symbol offset. If the section symbol doesn't exist, it bails. Do a fallback: when a section symbol isn't available, reference a function symbol instead. Reported-by: Dmitry Golovin <dima@golovin.in> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://github.com/ClangBuiltLinux/linux/issues/669 Link: https://lkml.kernel.org/r/9a9cae7fcf628843aabe5a086b1a3c5bf50f42e8.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Support Clang non-section symbols in ORC dumpJosh Poimboeuf
Historically, the relocation symbols for ORC entries have only been section symbols: .text+0: sp:sp+8 bp:(und) type:call end:0 However, the Clang assembler is aggressive about stripping section symbols. In that case we will need to use function symbols: freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0 In preparation for the generation of such entries in "objtool orc generate", add support for reading them in "objtool orc dump". Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com
2020-04-14objtool: Fix CONFIG_UBSAN_TRAP unreachable warningsJosh Poimboeuf
CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an unreachable code path. This includes __builtin_unreachable(). Because the BUG() macro uses __builtin_unreachable() after it emits its own UD2, this results in a double UD2. In this case objtool rightfully detects that the second UD2 is unreachable: init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction We weren't able to figure out a way to get rid of the double UD2s, so just silence the warning. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com
2020-04-14drm/i915/gvt: switch to user vfio_group_pin/upin_pagesYan Zhao
substitute vfio_pin_pages() and vfio_unpin_pages() with vfio_group_pin_pages() and vfio_group_unpin_pages(), so that it will not go through looking up, checking, referencing, dereferencing of VFIO group in each call. Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200313031151.8042-1-yan.y.zhao@intel.com
2020-04-14drm/i915/gvt: subsitute kvm_read/write_guest with vfio_dma_rwYan Zhao
As a device model, it is better to read/write guest memory using vfio interface, so that vfio is able to maintain dirty info of device IOVAs. Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200313031109.7989-1-yan.y.zhao@intel.com
2020-04-14drm/i915/gvt: hold reference of VFIO group during opening of vgpuYan Zhao
hold reference count of the VFIO group for each vgpu at vgpu opening and release the reference at vgpu releasing. Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Zhenyu Wang<zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang<zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200313031025.7936-1-yan.y.zhao@intel.com
2020-04-14genirq: Remove setup_irq() and remove_irq()afzal mohammed
Now that all the users of setup_irq() & remove_irq() have been replaced by request_irq() & free_irq() respectively, delete them. Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lkml.kernel.org/r/0aa8771ada1ac8e1312f6882980c9c08bd023148.1585320721.git.afzal.mohd.ma@gmail.com
2020-04-14Merge branch 'urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull RCU fix from Paul E. McKenney. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-14efi/x86: Revert struct layout change to fix kexec boot regressionArd Biesheuvel
Commit 0a67361dcdaa29 ("efi/x86: Remove runtime table address from kexec EFI setup data") removed the code that retrieves the non-remapped UEFI runtime services pointer from the data structure provided by kexec, as it was never really needed on the kexec boot path: mapping the runtime services table at its non-remapped address is only needed when calling SetVirtualAddressMap(), which never happens during a kexec boot in the first place. However, dropping the 'runtime' member from struct efi_setup_data was a mistake. That struct is shared ABI between the kernel and the kexec tooling for x86, and so we cannot simply change its layout. So let's put back the removed field, but call it 'unused' to reflect the fact that we never look at its contents. While at it, add a comment to remind our future selves that the layout is external ABI. Fixes: 0a67361dcdaa29 ("efi/x86: Remove runtime table address from kexec EFI setup data") Reported-by: Theodore Ts'o <tytso@mit.edu> Tested-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-04-14efi/x86: Don't remap text<->rodata gap read-only for mixed modeArd Biesheuvel
Commit d9e3d2c4f10320 ("efi/x86: Don't map the entire kernel text RW for mixed mode") updated the code that creates the 1:1 memory mapping to use read-only attributes for the 1:1 alias of the kernel's text and rodata sections, to protect it from inadvertent modification. However, it failed to take into account that the unused gap between text and rodata is given to the page allocator for general use. If the vmap'ed stack happens to be allocated from this region, any by-ref output arguments passed to EFI runtime services that are allocated on the stack (such as the 'datasize' argument taken by GetVariable() when invoked from efivar_entry_size()) will be referenced via a read-only mapping, resulting in a page fault if the EFI code tries to write to it: BUG: unable to handle page fault for address: 00000000386aae88 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD fd61063 P4D fd61063 PUD fd62063 PMD 386000e1 Oops: 0003 [#1] SMP PTI CPU: 2 PID: 255 Comm: systemd-sysv-ge Not tainted 5.6.0-rc4-default+ #22 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0008:0x3eaeed95 Code: ... <89> 03 be 05 00 00 80 a1 74 63 b1 3e 83 c0 48 e8 44 d2 ff ff eb 05 RSP: 0018:000000000fd73fa0 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 00000000386aae88 RCX: 000000003e9f1120 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000001 RBP: 000000000fd73fd8 R08: 00000000386aae88 R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc0f040220000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f21160ac940(0000) GS:ffff9cf23d500000(0000) knlGS:0000000000000000 CS: 0008 DS: 0018 ES: 0018 CR0: 0000000080050033 CR2: 00000000386aae88 CR3: 000000000fd6c004 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: Modules linked in: CR2: 00000000386aae88 ---[ end trace a8bfbd202e712834 ]--- Let's fix this by remapping text and rodata individually, and leave the gaps mapped read-write. Fixes: d9e3d2c4f10320 ("efi/x86: Don't map the entire kernel text RW for mixed mode") Reported-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200409130434.6736-10-ardb@kernel.org
2020-04-14efi/x86: Fix the deletion of variables in mixed modeGary Lin
efi_thunk_set_variable() treated the NULL "data" pointer as an invalid parameter, and this broke the deletion of variables in mixed mode. This commit fixes the check of data so that the userspace program can delete a variable in mixed mode. Fixes: 8319e9d5ad98ffcc ("efi/x86: Handle by-ref arguments covering multiple pages in mixed mode") Signed-off-by: Gary Lin <glin@suse.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200408081606.1504-1-glin@suse.com Link: https://lore.kernel.org/r/20200409130434.6736-9-ardb@kernel.org
2020-04-14efi/libstub/file: Merge file name buffers to reduce stack usageArd Biesheuvel
Arnd reports that commit 9302c1bb8e47 ("efi/libstub: Rewrite file I/O routine") reworks the file I/O routines in a way that triggers the following warning: drivers/firmware/efi/libstub/file.c:240:1: warning: the frame size of 1200 bytes is larger than 1024 bytes [-Wframe-larger-than=] We can work around this issue dropping an instance of efi_char16_t[256] from the stack frame, and reusing the 'filename' field of the file info struct that we use to obtain file information from EFI (which contains the file name even though we already know it since we used it to open the file in the first place) Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200409130434.6736-8-ardb@kernel.org
2020-04-14Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirementsArd Biesheuvel
The EFI handover protocol was introduced on x86 to permit the boot loader to pass a populated boot_params structure as an additional function argument to the entry point. This allows the bootloader to pass the base and size of a initrd image, which is more flexible than relying on the EFI stub's file I/O routines, which can only access the file system from which the kernel image itself was loaded from firmware. This approach requires a fair amount of internal knowledge regarding the layout of the boot_params structure on the part of the boot loader, as well as knowledge regarding the allowed placement of the initrd in memory, and so it has been deprecated in favour of a new initrd loading method that is based on existing UEFI protocols and best practices. So update the x86 boot protocol documentation to clarify that the EFI handover protocol has been deprecated, and while at it, add a note that invoking the EFI handover protocol still requires the PE/COFF image to be loaded properly (as opposed to simply being copied into memory). Also, drop the code32_start header field from the list of values that need to be provided, as this is no longer required. Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200409130434.6736-7-ardb@kernel.org
2020-04-14efi/arm: Deal with ADR going out of range in efi_enter_kernel()Ard Biesheuvel
Commit 0698fac4ac2a ("efi/arm: Clean EFI stub exit code from cache instead of avoiding it") introduced a PC-relative reference to 'call_cache_fn' into efi_enter_kernel(), which lives way at the end of head.S. In some cases, the ARM version of the ADR instruction does not have sufficient range, resulting in a build error: arch/arm/boot/compressed/head.S:1453: Error: invalid constant (fffffffffffffbe4) after fixup ARM defines an alternative with a wider range, called ADRL, but this does not exist for Thumb-2. At the same time, the ADR instruction in Thumb-2 has a wider range, and so it does not suffer from the same issue. So let's switch to ADRL for ARM builds, and keep the ADR for Thumb-2 builds. Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200409130434.6736-6-ardb@kernel.org
2020-04-14efi/x86: Always relocate the kernel for EFI handover entryArvind Sankar
Commit d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary") tries to avoid relocating the kernel in the EFI stub as far as possible. However, when systemd-boot is used to boot a unified kernel image [1], the image is constructed by embedding the bzImage as a .linux section in a PE executable that contains a small stub loader from systemd that will call the EFI stub handover entry, together with additional sections and potentially an initrd. When this image is constructed, by for example dracut, the initrd is placed after the bzImage without ensuring that at least init_size bytes are available for the bzImage. If the kernel is not relocated by the EFI stub, this could result in the compressed kernel's startup code in head_{32,64}.S overwriting the initrd. To prevent this, unconditionally relocate the kernel if the EFI stub was entered via the handover entry point. [1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images Fixes: d5cdf4cfeac9 ("efi/x86: Don't relocate the kernel unless necessary") Reported-by: Sergey Shatunov <me@prok.pw> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200406180614.429454-2-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200409130434.6736-5-ardb@kernel.org
2020-04-14efi/x86: Move efi stub globals from .bss to .dataArvind Sankar
Commit 3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage") removed the .bss section from the bzImage. However, while a PE loader is required to zero-initialize the .bss section before calling the PE entry point, the EFI handover protocol does not currently document any requirement that .bss be initialized by the bootloader prior to calling the handover entry. When systemd-boot is used to boot a unified kernel image [1], the image is constructed by embedding the bzImage as a .linux section in a PE executable that contains a small stub loader from systemd together with additional sections and potentially an initrd. As the .bss section within the bzImage is no longer explicitly present as part of the file, it is not initialized before calling the EFI handover entry. Furthermore, as the size of the embedded .linux section is only the size of the bzImage file itself, the .bss section's memory may not even have been allocated. In particular, this can result in efi_disable_pci_dma being true even when it was not specified via the command line or configuration option, which in turn causes crashes while booting on some systems. To avoid issues, place all EFI stub global variables into the .data section instead of .bss. As of this writing, only boolean flags for a few command line arguments and the sys_table pointer were in .bss and will now move into the .data section. [1] https://systemd.io/BOOT_LOADER_SPECIFICATION/#type-2-efi-unified-kernel-images Fixes: 3ee372ccce4d ("x86/boot/compressed/64: Remove .bss/.pgtable from bzImage") Reported-by: Sergey Shatunov <me@prok.pw> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200406180614.429454-1-nivedita@alum.mit.edu Link: https://lore.kernel.org/r/20200409130434.6736-4-ardb@kernel.org
2020-04-14efi/libstub/x86: Remove redundant assignment to pointer hdrColin Ian King
The pointer hdr is being assigned a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200402102537.503103-1-colin.king@canonical.com Link: https://lore.kernel.org/r/20200409130434.6736-3-ardb@kernel.org
2020-04-14efi/cper: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200311072145.5001-1-tiwai@suse.de Link: https://lore.kernel.org/r/20200409130434.6736-2-ardb@kernel.org
2020-04-13scsi: sg: add sg_remove_request in sg_common_writeLi Bin
If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-13io_uring: only post events in io_poll_remove_all() if we completed someJens Axboe
syzbot reports this crash: BUG: unable to handle page fault for address: ffffffffffffffe8 PGD f96e17067 P4D f96e17067 PUD f96e19067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 55 PID: 211750 Comm: trinity-c127 Tainted: G B L 5.7.0-rc1-next-20200413 #4 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 04/12/2017 RIP: 0010:__wake_up_common+0x98/0x290 el/sched/wait.c:87 Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10 RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8 RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8 RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000 R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8 FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0 Call Trace: __wake_up_common_lock+0xea/0x150 ommon_lock at kernel/sched/wait.c:124 ? __wake_up_common+0x290/0x290 ? lockdep_hardirqs_on+0x16/0x2c0 __wake_up+0x13/0x20 io_cqring_ev_posted+0x75/0xe0 v_posted at fs/io_uring.c:1160 io_ring_ctx_wait_and_kill+0x1c0/0x2f0 l at fs/io_uring.c:7305 io_uring_create+0xa8d/0x13b0 ? io_req_defer_prep+0x990/0x990 ? __kasan_check_write+0x14/0x20 io_uring_setup+0xb8/0x130 ? io_uring_create+0x13b0/0x13b0 ? check_flags.part.28+0x220/0x220 ? lockdep_hardirqs_on+0x16/0x2c0 __x64_sys_io_uring_setup+0x31/0x40 do_syscall_64+0xcc/0xaf0 ? syscall_return_slowpath+0x580/0x580 ? lockdep_hardirqs_off+0x1f/0x140 ? entry_SYSCALL_64_after_hwframe+0x3e/0xb3 ? trace_hardirqs_off_caller+0x3a/0x150 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fdcb9dd76ed Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6b 57 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe7fd4e4f8 EFLAGS: 00000246 ORIG_RAX: 00000000000001a9 RAX: ffffffffffffffda RBX: 00000000000001a9 RCX: 00007fdcb9dd76ed RDX: fffffffffffffffc RSI: 0000000000000000 RDI: 0000000000005d54 RBP: 00000000000001a9 R08: 0000000e31d3caa7 R09: 0082400004004000 R10: ffffffffffffffff R11: 0000000000000246 R12: 0000000000000002 R13: 00007fdcb842e058 R14: 00007fdcba4c46c0 R15: 00007fdcb842e000 Modules linked in: bridge stp llc nfnetlink cn brd vfat fat ext4 crc16 mbcache jbd2 loop kvm_intel kvm irqbypass intel_cstate intel_uncore dax_pmem intel_rapl_perf dax_pmem_core ip_tables x_tables xfs sd_mod tg3 firmware_class libphy hpsa scsi_transport_sas dm_mirror dm_region_hash dm_log dm_mod [last unloaded: binfmt_misc] CR2: ffffffffffffffe8 ---[ end trace f9502383d57e0e22 ]--- RIP: 0010:__wake_up_common+0x98/0x290 Code: 40 4d 8d 78 e8 49 8d 7f 18 49 39 fd 0f 84 80 00 00 00 e8 6b bd 2b 00 49 8b 5f 18 45 31 e4 48 83 eb 18 4c 89 ff e8 08 bc 2b 00 <45> 8b 37 41 f6 c6 04 75 71 49 8d 7f 10 e8 46 bd 2b 00 49 8b 47 10 RSP: 0018:ffffc9000adbfaf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffffffffffffe8 RCX: ffffffffaa9636b8 RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffffffffffffffe8 RBP: ffffc9000adbfb40 R08: fffffbfff582c5fd R09: fffffbfff582c5fd R10: ffffffffac162fe3 R11: fffffbfff582c5fc R12: 0000000000000000 R13: ffff888ef82b0960 R14: ffffc9000adbfb80 R15: ffffffffffffffe8 FS: 00007fdcba4c4740(0000) GS:ffff889033780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffe8 CR3: 0000000f776a0004 CR4: 00000000001606e0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x29800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]— which is due to error injection (or allocation failure) preventing the rings from being setup. On shutdown, we attempt to remove any pending requests, and for poll request, we call io_cqring_ev_posted() when we've killed poll requests. However, since the rings aren't setup, we won't find any poll requests. Make the calling of io_cqring_ev_posted() dependent on actually having completed requests. This fixes this setup corner case, and removes spurious calls if we remove poll requests and don't find any. Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-13drm/i915/perf: Do not clear pollin for small user read buffersAshutosh Dixit
It is wrong to block the user thread in the next poll when OA data is already available which could not fit in the user buffer provided in the previous read. In several cases the exact user buffer size is not known. Blocking user space in poll can lead to data loss when the buffer size used is smaller than the available data. This change fixes this issue and allows user space to read all OA data even when using a buffer size smaller than the available data using multiple non-blocking reads rather than staying blocked in poll till the next timer interrupt. v2: Fix ret value for blocking reads (Umesh) v3: Mistake during patch send (Ashutosh) v4: Remove -EAGAIN from comment (Umesh) v5: Improve condition for clearing pollin and return (Lionel) v6: Improve blocking read loop and other cleanups (Lionel) v7: Added Cc stable Testcase: igt/perf/polling-small-buf Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200403010120.3067-1-ashutosh.dixit@intel.com (cherry-picked from commit 6352219c39c04ed3f9a8d1cf93f87c21753a213e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-04-13ALSA: hda: Allow setting preallocation again for x86Takashi Iwai
The commit c31427d0d21e ("ALSA: hda: No preallocation on x86 platforms") changed CONFIG_SND_HDA_PREALLOC_SIZE setup and its default to zero for x86, as the preallocation should work almost all cases. However, this expectation was too naive; some applications try to allocate as the max buffer size as possible, and it leads to the memory exhaustion. More badly, the commit changed the kconfig no longer adjustable for x86, so you can't fix it statically (although it can be still adjusted via procfs). So, practically seen, it's more recommended to set a reasonable limit for x86, too. This patch follows to that experience, and changes the default to 2048 and allow the kconfig adjustable again. Fixes: c31427d0d21e ("ALSA: hda: No preallocation on x86 platforms") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223 Link: https://lore.kernel.org/r/20200413201919.24241-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-13NFS: Fix an ABBA spinlock issue in pnfs_update_layout()Trond Myklebust
We need to drop the inode spinlock while calling nfs4_select_rw_stateid(), since nfs4_copy_delegation_stateid() could take the delegation lock. Note that it is safe to do this, since all other calls to pnfs_update_layout() for that inode will find themselves blocked by the lock we hold on NFS_LAYOUT_FIRST_LAYOUTGET. Fixes: fc51b1cf391d ("NFS: Beware when dereferencing the delegation cred") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-13clk: sprd: don't gate uart console clockChunyan Zhang
Don't gate uart1_eb which provides console clock, gating that clock would make serial stop working if serial driver didn't enable that explicitly. Fixes: 0e4b8a2349f3 ("clk: sprd: add clocks support for SC9863A") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lkml.kernel.org/r/20200408020234.31764-1-zhang.lyra@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 05:35:21 +0000