summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-07i40e: enable WoL operation if config bit show WoL capableShannon Nelson
The driver was disabling Wake-on-LAN by default and waiting for the user to expressly turn it on. This patch has the driver turning on WoL from the start if enabled in the hardware config, which matches the behavior of our other drivers. Change-ID: I43faedb907f8ba4d1a61b72a7c86072b97af12b1 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e: Increase the amount of time we wait for reset to be donePaul M Stillwell Jr
In some rare cases the reset can take longer to complete so increase the amount of time we wait. Change-ID: Ib5628ec54b526a811ee33d1214fe763226406671 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07tcp: ensure prior synack rtx behavior with small backlogsEric Dumazet
Some applications use a listen() backlog of 1. Prior kernels were silently enforcing a qlen_log of 4, so that we were sending up to /proc/sys/net/ipv4/tcp_synack_retries SYNACK messages. Fixes: ef547f2ac16b ("tcp: remove max_qlen_log") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: ipv4: tcp.c Fixed an assignment coding style issueYuvaraja Mariappan
Fixed an assignment coding style issue Signed-off-by: Yuvaraja Mariappan <ymariappan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 's390-net'David S. Miller
Ursula Braun says: ==================== s390: qeth patches for net-next here are some s390 related patches for net-next. The qeth patches are performance optimizations in the driver. The qdio patch corrects a warning condition. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qdio: fix WARN_ON_ONCE conditionEugene Crosser
If HiperSockets Completion Queueing is enabled, qdio always issues a warning, since the condition is always met. This patch fixes the condition in WARN_ON_ONCE that was always true. Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qeth: optimize MAC handling in rx_mode callbackLakhvich Dmitriy
In layer2 mode of the qeth driver, MAC address lists from struct net_device require mapping to the OSA-card. The existing implementation is inefficient for lists with more than several MAC addresses, since for every ndo_set_rx_mode callback it removes all MAC addresses first, and then registers the current MAC address list. This patch changes implementation of ndo_set_rx_mode callback in qeth, only performing hardware registration/removal for new/deleted addresses. To shorten lookup of MAC addresses registered addresses are kept in a hashtable instead of a linear list. Signed-off-by: Lakhvich Dmitriy <ldmitriy@ru.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com> Reviewed-by: Thomas Richter <tmricht@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07s390/qeth: switch to napi_gro_receiveThomas Richter
Add support for GRO (generic receive offload) in the layer 2 part of device driver qeth. This results in a performance improvement when GRO and RX is turned on. Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'bridge-netlink-port-attrs'David S. Miller
Nikolay Aleksandrov says: ==================== bridge: netlink: complete port attribute support This is the second set that completes the bridge port's netlink support and makes everything from sysfs available via netlink. I've used sysfs as a guide of what and how to set again. I've tested setting/getting every option and also this time tested enabling KASAN. Again there're a few long line warnings about the ifla attribute names in br_port_info_size() but as the previous set - it's good to know what's been accounted for. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: add support for port's multicast_router attributeNikolay Aleksandrov
Add IFLA_BRPORT_MULTICAST_ROUTER to allow setting/getting port's multicast_router via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: allow to flush port's fdbNikolay Aleksandrov
Add IFLA_BRPORT_FLUSH to allow flushing port's fdb similar to sysfs's flush. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's timer valuesNikolay Aleksandrov
Add the following attributes in order to export port's timer values: IFLA_BRPORT_MESSAGE_AGE_TIMER, IFLA_BRPORT_FORWARD_DELAY_TIMER and IFLA_BRPORT_HOLD_TIMER. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's topology_change_ack and config_pendingNikolay Aleksandrov
Add IFLA_BRPORT_TOPOLOGY_CHANGE_ACK and IFLA_BRPORT_CONFIG_PENDING to allow getting port's topology_change_ack and config_pending respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's id and numberNikolay Aleksandrov
Add IFLA_BRPORT_(ID|NO) to allow getting port's port_id and port_no respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's designated cost and portNikolay Aleksandrov
Add IFLA_BRPORT_DESIGNATED_(COST|PORT) to allow getting the port's designated cost and port respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's bridge idNikolay Aleksandrov
Add IFLA_BRPORT_BRIDGE_ID to allow getting the designated bridge id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's root idNikolay Aleksandrov
Add IFLA_BRPORT_ROOT_ID to allow getting the designated root id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Lookup actual route when oif is VRF deviceDavid Ahern
If the user specifies a VRF device in a get route query the custom route pointing to the VRF device is returned: $ ip route ls table vrf-red unreachable default broadcast 10.2.1.0 dev eth1 proto kernel scope link src 10.2.1.2 10.2.1.0/24 dev eth1 proto kernel scope link src 10.2.1.2 local 10.2.1.2 dev eth1 proto kernel scope host src 10.2.1.2 broadcast 10.2.1.255 dev eth1 proto kernel scope link src 10.2.1.2 $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev vrf-red cache Add the flags to skip the custom route and go directly to the FIB. With this patch the actual route is returned: $ ip route get oif vrf-red 10.2.1.40 10.2.1.40 dev eth1 src 10.2.1.2 cache Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge tag 'mac80211-next-for-davem-2015-10-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the current cycle, we have the following right now: * many internal fixes, API improvements, cleanups, etc. * full AP client state tracking in cfg80211/mac80211 from Ayala * VHT support (in mac80211) for mesh * some A-MSDU in A-MPDU support from Emmanuel * show current TX power to userspace (from Rafał) * support for netlink dump in vendor commands (myself) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'l3mdev_saddr_op'David S. Miller
David Ahern says: ==================== net: Add saddr op to l3mdev and vrf First 2 patches are re-sends of patches that got lost in the ethosphere Tuesday; they were part of the first round of l3mdev conversions. Next 3 handle the source address lookup for raw and datagram sockets bound to a VRF device. The conversion to the get_saddr op also fixes locally originated TCP packets showing up at the VRF device. The use of the FLOWI_FLAG_L3MDEV_SRC flag in ip_route_connect_init was causing locally generated packets to skip the VRF device. v2 - rebased to top of net-next per device delete fix and hash based multipath patches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add l3mdev saddr lookup to raw_sendmsgDavid Ahern
ping originated on box through a VRF device is showing up in tcpdump without a source address: $ tcpdump -n -i vrf-blue 08:58:33.311303 IP 0.0.0.0 > 10.2.2.254: ICMP echo request, id 2834, seq 1, length 64 08:58:33.311562 IP 10.2.2.254 > 10.2.2.2: ICMP echo reply, id 2834, seq 1, length 64 Add the call to l3mdev_get_saddr to raw_sendmsg. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add source address lookup op for VRFDavid Ahern
Add operation to l3mdev to lookup source address for a given flow. Add support for the operation to VRF driver and convert existing IPv4 hooks to use the new lookup. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Refactor path selection in __ip_route_output_key_hashDavid Ahern
VRF device needs the same path selection following lookup to set source address. Rather than duplicating code, move existing code into a function that is exported to modules. Code move only; no functional change. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add netif_is_l3_slaveDavid Ahern
IPv6 addrconf keys off of IFF_SLAVE so can not use it for L3 slave. Add a new private flag and add netif_is_l3_slave function for checking it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Rename FLOWI_FLAG_VRFSRC to FLOWI_FLAG_L3MDEV_SRCDavid Ahern
Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Fix vti use case with oif in dst lookups for IPv6David Ahern
It occurred to me yesterday that 741a11d9e4103 ("net: ipv6: Add RT6_LOOKUP_F_IFACE flag if oif is set") means that xfrm6_dst_lookup needs the FLOWI_FLAG_SKIP_NH_OIF flag set. This latest commit causes the oif to be considered in lookups which is known to break vti. This explains why 58189ca7b274 did not the IPv6 change at the time it was submitted. Fixes: 42a7b32b73d6 ("xfrm: Add oif to dst lookups") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07gianfar: Add WAKE_UCAST and "wake-on-filer" supportClaudiu Manoil
This enables eTSEC's filer (Rx parser) and the FGPI Rx interrupt (Filer General Purpose Interrupt) as a wakeup source event. Upon entering suspend state, the eTSEC filer is given a rule to match incoming L2 unicast packets. A packet matching the rule will be enqueued in the Rx ring and a FGPI Rx interrupt will be asserted by the filer to wakeup the system. Other packet types will be dropped. On resume the filer table is restored to the content before entering suspend state. The set of rules from gfar_filer_config_wol() could be extended to implement other WoL capabilities as well. The "fsl,wake-on-filer" DT binding enables this capability on certain platforms that feature the necessary power management infrastructure, targeting mainly printing and imaging applications. (refer to Power Management section of the SoC Ref Man) Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07powerpc: dts: p1022si: Add fsl,wake-on-filer for eTSECClaudiu Manoil
Enable the "wake-on-filer" (aka. wake on user defined packet) wake on lan capability for the eTSEC ethernet nodes. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07doc: dt: net: Add fsl,wake-on-filer for eTSECClaudiu Manoil
Add the "fsl,wake-on-filer" property for eTSEC nodes to indicate that the system has the power management infrastructure needed to be able to wake up the system via FGPI (filer, aka. h/w rx parser) interrupt. Cc: Li Yang <leoli@freescale.com> Cc: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'ovs-ipv6-tunnel'David S. Miller
Jiri Benc says: ==================== openvswitch: add IPv6 tunneling support This builds on the previous work that added IPv6 support to lwtunnels and adds IPv6 tunneling support to ovs. To use IPv6 tunneling, there needs to be a metadata based tunnel net_device created and added to the ovs bridge. Currently, only vxlan is supported by the kernel, with geneve to follow shortly. There's no need nor intent to add a support for this into the vport-vxlan (etc.) compat layer. v3: dropped the last two patches added in v2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: netlink attributes for IPv6 tunnelingJiri Benc
Add netlink attributes for IPv6 tunnel addresses. This enables IPv6 support for tunnels. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07openvswitch: add tunnel protocol to sw_flow_keyJiri Benc
Store tunnel protocol (AF_INET or AF_INET6) in sw_flow_key. This field now also acts as an indicator whether the flow contains tunnel data (this was previously indicated by tun_key.u.ipv4.dst being set but with IPv6 addresses in an union with IPv4 ones this won't work anymore). The new field was added to a hole in sw_flow_key. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: make br_fill_info's frame size smallerNikolay Aleksandrov
When KASAN is enabled the frame size grows > 2048 bytes and we get a warning, so make it smaller. net/bridge/br_netlink.c: In function 'br_fill_info': >> net/bridge/br_netlink.c:1110:1: warning: the frame size of 2160 bytes >> is larger than 2048 bytes [-Wframe-larger-than=] Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: Add support for filtering neigh dump by device indexDavid Ahern
Add support for filtering neighbor dumps by device by adding the NDA_IFINDEX attribute to the dump request. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-03 This series contains updates to i40e and i40evf, some of which are to resolve more Red Hat bugzilla issues. Jiang Liu updates the i40e and i40evf drivers to use numa_mem_id() instead of numa_node_id() to get the nearest node with memory which better supports memoryless nodes. Anjali fixes an issue from Dan Carpenter <dan.carpenter@oracle.com>, to resolve a memory leak in X722 RSS configuration path, where we should free the memory allocated before exiting. Shannon modifies the drivers to ensure we have the spinlocks before we clear the ARQ and ASQ management registers. In addition, we widen the locked portion insert a sanity check to ensure we are working with safe register values. Mitch fixes an issue where under certain circumstances, we can get an extra VF_RESOURCES message from the PF driver at runtime. When this occurs, we need to parse it because our VSI may have changed and that will affect the relationship with the PF driver. But this parsing also blows away our current MAC address, so resolve the issue by restoring the current MAC address from the netdev struct after we parse the resource message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: better error reportingRussell King
Add additional error reporting to the generic DSA code, so it's easier to debug when things go wrong. This was useful when initially bringing up 88e6176 on a new board. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: mv88e6xxx: remove link pollingRussell King
The link status is polled by the generic phy layer, there's no need to duplicate that polling with additional polling. This additional polling adds additional MDIO traffic, and races with the generic phy layer, resulting in missing or duplicated link status messages. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-06regmap: Allow installing custom reg_update_bits functionJon Ringle
This commit allows installing a custom reg_update_bits function for cases where the hardware provides a mechanism to set or clear register bits without a read/modify/write cycle. Such is the case with the Microchip ENCX24J600. If a custom reg_update_bits function is provided, it will only be used against volatile registers. Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-06Revert "regmap: Allow installing custom reg_update_bits function"David S. Miller
This reverts commit 7741c373cf3ea1f5383fa97fb7a640a429d3dd7c.
2015-10-06Revert "net: Microchip encx24j600 driver"David S. Miller
This reverts commit 04fbfce7a222327b97ca165294ef19f0faa45960.
2015-10-06Revert "net: encx24j600_exit() can be static"David S. Miller
This reverts commit 9886ce2b9d4e5a8bb3d78d0f7eff3c0f1ed58d67.
2015-10-05ipv4: Fix compilation errors in fib_rebalancePeter Nørlund
This fixes net/built-in.o: In function `fib_rebalance': fib_semantics.c:(.text+0x9df14): undefined reference to `__divdi3' and net/built-in.o: In function `fib_rebalance': net/ipv4/fib_semantics.c:572: undefined reference to `__aeabi_ldivmod' Fixes: 0e884c78ee19 ("ipv4: L3 hash-based multipath") Signed-off-by: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05RDS: IB: split mr pool to improve 8K messages performanceSantosh Shilimkar
8K message sizes are pretty important usecase for RDS current workloads so we make provison to have 8K mrs available from the pool. Based on number of SG's in the RDS message, we pick a pool to use. Also to make sure that we don't under utlise mrs when say 8k messages are dominating which could lead to 8k pull being exhausted, we fall-back to 1m pool till 8k pool recovers for use. This helps to at least push ~55 kB/s bidirectional data which is a nice improvement. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-10-05RDS: IB: use max_mr from HCA caps than max_fmrSantosh Shilimkar
All HCA drivers seems to popullate max_mr caps and few of them do both max_mr and max_fmr. Hence update RDS code to make use of max_mr. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-10-05RDS: IB: mark rds_ib_fmr_wq staticSantosh Shilimkar
Fix below warning by marking rds_ib_fmr_wq static net/rds/ib_rdma.c:87:25: warning: symbol 'rds_ib_fmr_wq' was not declared. Should it be static? Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-10-05RDS: IB: use already available pool handle from ibmrSantosh Shilimkar
rds_ib_mr already keeps the pool handle which it associates with. Lets use that instead of round about way of fetching it from rds_ib_device. No functional change. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-10-05RDS: IB: fix the rds_ib_fmr_wq kick callSantosh Shilimkar
RDS IB mr pool has its own workqueue 'rds_ib_fmr_wq', so we need to use queue_delayed_work() to kick the work. This was hurting the performance since pool maintenance was less often triggered from other path. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-10-05RDS: IB: handle rds_ibdev release case instead of crashing the kernelSantosh Shilimkar
Just in case we are still handling the QP receive completion while the rds_ibdev is released, drop the connection instead of crashing the kernel. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-10-05RDS: IB: split send completion handling and do batch ackSantosh Shilimkar
Similar to what we did with receive CQ completion handling, we split the transmit completion handler so that it lets us implement batched work completion handling. We re-use the cq_poll routine and makes use of RDS_IB_SEND_OP to identify the send vs receive completion event handler invocation. Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2015-10-05RDS: IB: ack more receive completions to improve performanceSantosh Shilimkar
For better performance, we split the receive completion IRQ handler. That lets us acknowledge several WCE events in one call. We also limit the WC to max 32 to avoid latency. Acknowledging several completions in one call instead of several calls each time will provide better performance since less mutual exclusion locks are being performed. In next patch, send completion is also split which re-uses the poll_cq() and hence the code is moved to ib_cm.c Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 12:57:46 +0000