summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-02net/mlx5e: Enhance CQ data on diagnose outputAya Levin
Add CQ's consumer index and size to the CQ's diagnose output retruved on RX/TX reporter diadgnose. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 2413 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0 ci: 0 size: 1024 channel ix: 1 rqn: 2418 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0 ci: 0 size: 1024 $ devlink health diagnose pci/0000:00:0b.0 reporter tx Common Config: SQ: stride size: 64 size: 1024 CQ: stride size: 64 size: 1024 SQs: channel ix: 0 tc: 0 txq ix: 0 sqn: 2412 HW state: 1 stopped: false cc: 0 pc: 0 CQ: cqn: 1030 HW status: 0 ci: 0 size: 1024 channel ix: 1 tc: 0 txq ix: 1 sqn: 2417 HW state: 1 stopped: false cc: 5 pc: 5 CQ: cqn: 1034 HW status: 0 ci: 5 size: 1024 Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Rename reporter's helpersAya Levin
Change prefix to match resident file: %s/mlx5e_reporter_cq_diagnose/mlx5e_health_cq_diag_fmsg %s/mlx5e_reporter_cq_common_diagnose/mlx5e_health_cq_common_diag_fmsg %s/mlx5e_reporter_named_obj_nest_start/mlx5e_health_fmsg_named_obj_nest_start %s/mlx5e_reporter_named_obj_nest_end/mlx5e_health_fmsg_named_obj_nest_end Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Add helper to get the RQ WQE counterAya Levin
Add a helper which retrieves the RQ's WQE counter. Use this helper in the RX reporter diagnose callback. $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: channel ix: 0 rqn: 2113 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1032 HW status: 0 channel ix: 1 rqn: 2118 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1 CQ: cqn: 1036 HW status: 0 Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Add helper to get RQ WQE's headAya Levin
Add helper which retrieves the RQ WQE's head. Use this helper in RX reporter diagnose callback. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Move RQ helpers to txrx.hAya Levin
Use txrx.h to contain helper function regarding TX/RX. In the coming patches, I will add more RQ helpers. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Align RX/TX reporters diagnose output formatAya Levin
Change the hierarchy of the RX reporter 'Common config' in the diagnose output to match the 'Common config' of the TX reporter which reflects that CQ is a helper to the traffic queues. Before: $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: ... After: $ devlink health diagnose pci/0000:00:0b.0 reporter rx Common config: RQ: type: 2 stride size: 2048 size: 8 CQ: stride size: 64 size: 1024 RQs: ... Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Remove redundant RQ state queryAya Levin
When received a CQE error, the driver inspect the syndrome given by the firmware. RQ recovery is initiated only as a result of a fatal syndrome; syndrome which set the RQ into an error state. Hence no need to query the RQ state at the beginning of the recovery process. Add additional debug prints before recovering. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Add a flush timeout defineAya Levin
During queue's recovery, driver waits for flush. The flush timeout is set to 2 seconds. Add a define for this value for the benefit of RX and TX reporters. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02net/mlx5e: Change reporters create functions to return voidEran Ben Elisha
Creation of devlink health reporters is not fatal for mlx5e instance load. In case of error in reporter's creation, the return value is ignored. Change all reporters creation functions to return void. In addition, with this change, a failure in creating a reporter, will not prevent the driver from trying to create the next reporter in the list. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-07-02bpf: Fix build without CONFIG_STACKTRACESong Liu
Without CONFIG_STACKTRACE stack_trace_save_tsk() is not defined. Let get_callchain_entry_for_task() to always return NULL in such cases. Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200703024537.79971-1-songliubraving@fb.com
2020-07-02Merge branch 'sfc-prerequisites-for-EF100-driver-part-3'David S. Miller
Edward Cree says: ==================== sfc: prerequisites for EF100 driver, part 3 Continuing on from [1] and [2], this series assembles the last pieces of the common codebase that will be used by the forthcoming EF100 driver. Patch #1 also adds a minor feature to EF10 (setting MTU on VFs) since EF10 supports the same MCDI extension which that feature will use on EF100. Patches #5 & #7, while they should have no externally-visible effect on driver functionality, change how that functionality is implemented and how the driver represents TXQ configuration internally, so are not mere cleanup/refactoring like most of these prerequisites have (from the perspective of the existing sfc driver) been. Changes in v2: * Patch #1: use efx_mcdi_set_mtu() directly, instead of as a fallback, in the mtu_only case (Jakub) * Patch #3: fix symbol collision in non-modular builds by renaming interrupt_mode to efx_interrupt_mode (kernel test robot) * Patch #6: check for failure of netif_set_real_num_[tr]x_queues (Jakub) * Patch #12: cleaner solution for ethtool drvinfo (Jakub, David) [1]: https://lore.kernel.org/netdev/20200629.173812.1532344417590172093.davem@davemloft.net/T/ [2]: https://lore.kernel.org/netdev/20200630.130923.402514193016248355.davem@davemloft.net/T/ ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: helper function to set default RSS table of given sizeEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: NVRAM selftest support codeEdward Cree
We have yet another new scheme for NVRAM, and a corresponding new MCDI. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: populate BUFFER_SIZE_BYTES in INIT_RXQEdward Cree
The QDMA subsystem on EF100 needs this information. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc_ef100: add EF100 to NIC-revision enumerationEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: get drvinfo driver name from outside the common codeEdward Cree
Since ethtool_common.o will be built into both sfc and sfc_ef100 drivers, it can't use KBUILD_MODNAME directly. Instead, make it reference a string provided by the individual driver code. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: initialise RSS context ID to 'no RSS context' in efx_init_struct()Edward Cree
Previously this was only happening in ef10-specific code. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: commonise efx_fini_dmaqEdward Cree
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: factor out efx_mcdi_filter_table_down() from _remove()Edward Cree
_down() merely removes all our filters and VLANs, it doesn't free efx->filter_state itself. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: don't call tx_limit_len if NIC type doesn't have oneEdward Cree
EF100 doesn't need to split up large DMAs. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: assign TXQs without gapsEdward Cree
Since we only allocate VIs for the number of TXQs we actually need, we cannot naively use "channel * TXQ_TYPES + txq" for the TXQ number, as this has gaps (when efx->tx_queues_per_channel < EFX_TXQ_TYPES) and thus overruns the driver's VI allocations, causing the firmware to reject the MC_CMD_INIT_TXQ based on INSTANCE. Thus, we distinguish INSTANCE (stored in tx_queue->queue) from LABEL (tx_queue->label); the former is allocated starting from 0 in efx_set_channels(), while the latter is simply the txq type (index in channel->tx_queue array). To simplify things, rather than changing tx_queues_per_channel after setting up TXQs, make Siena always probe its HIGHPRI queues at start of day, rather than deferring it until tc mqprio enables them. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: commonise netif_set_real_num[tr]x_queues callsEdward Cree
While we're at it, also check them for failure. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: make tx_queues_per_channel variable at runtimeEdward Cree
Siena needs four TX queues (csum * highpri), EF10 needs two (csum), and EF100 only needs one (as checksumming is controlled entirely by the transmit descriptor). Rather than having various bits of ad-hoc code to decide which queues to set up etc., put the knowledge of how many TXQs a channel has in one place. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: move modparam 'rss_cpus' out of common channel codeEdward Cree
Instead of exposing this old module parameter on the new driver (thus having to keep it forever after for compatibility), let's confine it to the old one; if we find later that we need the feature, we ought to support it properly, with ethtool set-channels. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: move modparam 'interrupt_mode' out of common channel codeEdward Cree
EF100 only supports MSI-X, so there's no need for the new driver to expose this old module parameter. Since it's now visible to the linker, we have to rename it internally to efx_interrupt_mode to avoid symbol collisions in non-modular builds. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: remove max_interrupt_modeEdward Cree
All NICs supported by this driver are capable of MSI-X interrupts (only Falcon A1 wasn't, and that's now hived off into its own driver), so no need for a nic-type parameter. Besides, the code that checked it was buggy anyway (the following assignment that checked min_interrupt_mode overrode it). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02sfc: support setting MTU even if not privileged to configure MAC fullyEdward Cree
Unprivileged functions (such as VFs) may set their MTU by use of the 'control' field of MC_CMD_SET_MAC_EXT, as used in efx_mcdi_set_mtu(). If calling efx_ef10_mac_reconfigure() from efx_change_mtu(), and the NIC supports the above (SET_MAC_ENHANCED capability), use it rather than efx_mcdi_set_mac(). Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02xen-netfront: remove redundant assignment to variable 'act'Colin Ian King
The variable act is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02Merge branch 'net-ipa-simplify-endpoint-programming'David S. Miller
Alex Elder says: ==================== net: ipa: simplify endpoint programming Add tests to functions so they don't update undefined endpoint registers, rather than requiring the caller to avoid calling them. Move the call to a workaround function required when suspending inside the function that puts an endpoint into suspend mode. This requires moving a few functions (which are otherwise unchanged). Then simplify ipa_endpoint_program() to call essentially all endpoint register update functions unconditionally. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: ipa: simplify ipa_endpoint_program()Alex Elder
Have functions that write endpoint configuration registers return immediately if they are not valid for the direction of transfer for the endpoint. This allows most of the calls in ipa_endpoint_program() to be made unconditionally. Reorder the register writes to match the order of their definition (based on offset). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: ipa: move version test inside ipa_endpoint_program_suspend()Alex Elder
IPA version 4.0+ does not support endpoint suspend. Put a test at the top of ipa_endpoint_program_suspend() that returns immediately if suspend is not supported rather than making that check in the caller. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: ipa: always handle suspend workaroundAlex Elder
IPA version 3.5.1 has a hardware quirk that requires special handling if an RX endpoint is suspended while aggregation is active. This handling is implemented by ipa_endpoint_suspend_aggr(). Have ipa_endpoint_program_suspend() be responsible for calling ipa_endpoint_suspend_aggr() if suspend mode is being enabled on an endpoint. If the endpoint does not support aggregation, or if aggregation isn't active, this call will continue to have no effect. Move the definition of ipa_endpoint_suspend_aggr() up in the file so its definition precedes the new earlier reference to it. This requires ipa_endpoint_aggr_active() and ipa_endpoint_force_close() to be moved as well. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: ipa: move version test inside ipa_endpoint_program_delay()Alex Elder
IPA version 4.2 has a hardware quirk that affects endpoint delay mode, so it isn't used there. Isolate the test that avoids using delay mode for that version inside ipa_endpoint_program_delay(), rather than making that check in the caller. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02mlx4: Mark PM functions as __maybe_unusedWei Yongjun
In certain configurations without power management support, the following warnings happen: drivers/net/ethernet/mellanox/mlx4/main.c:4388:12: warning: 'mlx4_resume' defined but not used [-Wunused-function] 4388 | static int mlx4_resume(struct device *dev_d) | ^~~~~~~~~~~ drivers/net/ethernet/mellanox/mlx4/main.c:4373:12: warning: 'mlx4_suspend' defined but not used [-Wunused-function] 4373 | static int mlx4_suspend(struct device *dev_d) | ^~~~~~~~~~~~ Mark these functions as __maybe_unused to make it clear to the compiler that this is going to happen based on the configuration, which is the standard for these types of functions. Fixes: 0e3e206a3e12 ("mlx4: use generic power management") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02ksz884x: mark pcidev_suspend() as __maybe_unusedWei Yongjun
In certain configurations without power management support, gcc report the following warning: drivers/net/ethernet/micrel/ksz884x.c:7182:12: warning: 'pcidev_suspend' defined but not used [-Wunused-function] 7182 | static int pcidev_suspend(struct device *dev_d) | ^~~~~~~~~~~~~~ Mark pcidev_suspend() as __maybe_unused to make it clear. Fixes: 64120615d140 ("ksz884x: use generic power management") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02Merge branch 'net-macb-few-code-cleanups'David S. Miller
Claudiu Beznea says: ==================== net: macb: few code cleanups Patches in this series cleanup a bit macb code. Changes in v2: - in patch 2/4 use hweight32() instead of hweight_long() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: macb: remove is_udp variableClaudiu Beznea
Remove is_udp variable that is used in only one place and use ip_hdr(skb)->protocol == IPPROTO_UDP check instead. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: macb: do not initialize queue variableClaudiu Beznea
Do not initialize queue variable. It is already initialized in for loops. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: macb: use hweight32() to count set bits in queue_maskClaudiu Beznea
Use hweight32() to count set bits in queue_mask. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02net: macb: do not set again bit 0 of queue_maskClaudiu Beznea
Bit 0 of queue_mask is set at the beginning of macb_probe_queues() function. Do not set it again after reading DGFG6 but instead use "|=" operator. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02Merge branch 'bridge-mrp-Add-support-for-getting-the-status'David S. Miller
Horatiu Vultur says: ==================== bridge: mrp: Add support for getting the status This patch series extends the MRP netlink interface to allow the userspace daemon to get the status of the MRP instances in the kernel. v3: - remove misleading comment - fix to use correctly the RCU v2: - fix sparse warnings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02bridge: Extend br_fill_ifinfo to return MPR statusHoratiu Vultur
This patch extends the function br_fill_ifinfo to return also the MRP status for each instance on a bridge. It also adds a new filter RTEXT_FILTER_MRP to return the MRP status only when this is set, not to interfer with the vlans. The MRP status is return only on the bridge interfaces. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02bridge: mrp: Add br_mrp_fill_infoHoratiu Vultur
Add the function br_mrp_fill_info which populates the MRP attributes regarding the status of each MRP instance. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02bridge: uapi: mrp: Extend MRP attributes to get the statusHoratiu Vultur
Add MRP attribute IFLA_BRIDGE_MRP_INFO to allow the userspace to get the current state of the MRP instances. This is a nested attribute that contains other attributes like, ring id, index of primary and secondary port, priority, ring state, ring role. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-02bpf: selftests: Restore netns after each testMartin KaFai Lau
It is common for networking tests creating its netns and making its own setting under this new netns (e.g. changing tcp sysctl). If the test forgot to restore to the original netns, it would affect the result of other tests. This patch saves the original netns at the beginning and then restores it after every test. Since the restore "setns()" is not expensive, it does it on all tests without tracking if a test has created a new netns or not. The new restore_netns() could also be done in test__end_subtest() such that each subtest will get an automatic netns reset. However, the individual test would lose flexibility to have total control on netns for its own subtests. In some cases, forcing a test to do unnecessary netns re-configure for each subtest is time consuming. e.g. In my vm, forcing netns re-configure on each subtest in sk_assign.c increased the runtime from 1s to 8s. On top of that, test_progs.c is also doing per-test (instead of per-subtest) cleanup for cgroup. Thus, this patch also does per-test restore_netns(). The only existing per-subtest cleanup is reset_affinity() and no test is depending on this. Thus, it is removed from test__end_subtest() to give a consistent expectation to the individual tests. test_progs.c only ensures any affinity/netns/cgroup change made by an earlier test does not affect the following tests. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200702004858.2103728-1-kafai@fb.com
2020-07-02bpf: selftests: A few improvements to network_helpers.cMartin KaFai Lau
This patch makes a few changes to the network_helpers.c 1) Enforce SO_RCVTIMEO and SO_SNDTIMEO This patch enforces timeout to the network fds through setsockopt SO_RCVTIMEO and SO_SNDTIMEO. It will remove the need for SOCK_NONBLOCK that requires a more demanding timeout logic with epoll/select, e.g. epoll_create, epoll_ctrl, and then epoll_wait for timeout. That removes the need for connect_wait() from the cgroup_skb_sk_lookup.c. The needed change is made in cgroup_skb_sk_lookup.c. 2) start_server(): Add optional addr_str and port to start_server(). That removes the need of the start_server_with_port(). The caller can pass addr_str==NULL and/or port==0. I have a future tcp-hdr-opt test that will pass a non-NULL addr_str and it is in general useful for other future tests. "int timeout_ms" is also added to control the timeout on the "accept(listen_fd)". 3) connect_to_fd(): Fully use the server_fd. The server sock address has already been obtained from getsockname(server_fd). The sockaddr includes the family, so the "int family" arg is redundant. Since the server address is obtained from server_fd, there is little reason not to get the server's socket type from the server_fd also. getsockopt(server_fd) can be used to do that, so "int type" arg is also removed. "int timeout_ms" is added. 4) connect_fd_to_fd(): "int timeout_ms" is added. Some code is also refactored to connect_fd_to_addr() which is shared with connect_to_fd(). 5) Preserve errno: Some callers need to check errno, e.g. cgroup_skb_sk_lookup.c. Make changes to do it more consistently in save_errno_close() and log_err(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20200702004852.2103003-1-kafai@fb.com
2020-07-01Merge branch 'mptcp-add-receive-buffer-auto-tuning'David S. Miller
Florian Westphal says: ==================== mptcp: add receive buffer auto-tuning First patch extends the test script to allow for reproducible results. Second patch adds receive auto-tuning. Its based on what TCP is doing, only difference is that we use the largest RTT of any of the subflows and that we will update all subflows with the new value. Else, we get spurious packet drops because the mptcp work queue might not be able to move packets from subflow socket to master socket fast enough. Without the adjustment, TCP may drop the packets because the subflow socket is over its rcvbuffer limit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01mptcp: add receive buffer auto-tuningFlorian Westphal
When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01selftests: mptcp: add option to specify size of file to transferFlorian Westphal
The script generates two random files that are then sent via tcp and mptcp connections. In order to compare throughput over consecutive runs add an option to provide the file size on the command line: "-f 128000". Also add an option, -t, to enable tcp tests. This is useful to compare throughput of mptcp connections and tcp connections. Example: run tests with a 4mb file size, 300ms delay 0.01% loss, default gso/tso/gro settings and with large write/blocking io: mptcp_connect.sh -t -f $((4 * 1024 * 1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01net: sched: Allow changing default qdisc to FQ-PIEDanny Lin
Similar to fq_codel and the other qdiscs that can set as default, fq_pie is also suitable for general use without explicit configuration, which makes it a valid choice for this. This is useful in situations where a painless out-of-the-box solution for reducing bufferbloat is desired but fq_codel is not necessarily the best choice. For example, fq_pie can be better for DASH streaming, but there could be more cases where it's the better choice of the two simple AQMs available in the kernel. Signed-off-by: Danny Lin <danny@kdrag0n.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 03:01:56 +0000