summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-11drm/i915/display: fix comment on skl strapsLucas De Marchi
We are not checking for specific SKUs and feedback from HW team is that it may not work since it was supposed to be fixed by the same time straps stopped to be used. So, just update comment. v2: Instead of removing the check, just update the comment since feedback from HW team was that it actually may not work Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200625001120.22810-3-lucas.demarchi@intel.com
2021-02-11drm/i915/gen9_bc: Introduce TGP PCH DDC pin mappingsLyude Paul
With the introduction of gen9_bc, where Intel combines Cometlake CPUs with a Tigerpoint PCH, we'll need to introduce new DDC pin mappings for this platform in order to make all of the display connectors work. So, let's do that. Changes since v4: * Split this into it's own patch - vsyrjala Changes since v5: * Rename gen9bc_port_to_ddc_pin() to gen9bc_tgp_port_to_ddc_pin() Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> [originally from Tejas's work] Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-3-lyude@redhat.com
2021-02-11drm/i915/gen9_bc: Recognize TGP PCH + CML combosLyude Paul
Since Intel has introduced the gen9_bc platform, a combination of Tigerpoint PCHs and CML CPUs, let's recognize such platforms as valid and avoid WARNing on them. Changes since v4: * Split this into it's own patch - vsyrjala Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> [originally from Tejas's work] Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-2-lyude@redhat.com
2021-02-11drm/i915/display: Handle lane polarity for DDI portUma Shankar
Lane Reversal is required for some of the DDI ports. This information is populated in VBT and driver should read the same and set the polarity while enabling the port. This patch handles the same. It helps fix a display blankout issue on DP ports on certain platforms. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210211114209.23866-1-uma.shankar@intel.com
2021-02-10drm/i915/display: Add DDR5 and LPDDR5 BW buddy page entriesJosé Roberto de Souza
Set the right BW buddy page mask for new memory types. BSpec: 49218 Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209174238.153278-1-jose.souza@intel.com
2021-02-10drm/i915: Warn when releasing a frontbuffer while in useVille Syrjälä
Let's scream if we are about to release a frontbuffer which is still in use. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2021-02-10drm/i915: Fix overlay frontbuffer trackingVille Syrjälä
We don't have a persistent fb holding a reference to the frontbuffer object, so every time we do the get+put we throw the frontbuffer object immediately away. And so the next time around we get a pristine frontbuffer object with bits==0 even for the old vma. This confuses the frontbuffer tracking code which understandably expects the old frontbuffer to have the overlay's bit set. Fix this by hanging on to the frontbuffer reference until the next flip. And just to make this a bit more clear let's track the frontbuffer explicitly instead of just grabbing it via the old vma. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1136 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-2-ville.syrjala@linux.intel.com Fixes: 8e7cb1799b4f ("drm/i915: Extract intel_frontbuffer active tracking") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2021-02-10drm/i915: Disallow plane x+w>stride on ilk+ with X-tilingVille Syrjälä
ilk+ planes get notably unhappy when the plane x+w exceeds the stride. This wasn't a problem previously because we always aligned SURF to the closest tile boundary so the x offset never got particularly large. But now with async flips we have to align to 256KiB instead and thus this becomes a real issue. On ilk/snb/ivb it looks like the accesses just wrap early to the next tile row when scanout goes past the SURF+n*stride boundary, hsw/bdw suffer more heavily and start to underrun constantly. i965/g4x appear to be immune. vlv/chv I've not yet checked. Let's borrow another trick from the skl+ code and search backwards for a better SURF offset in the hopes of getting the x offset below the limit. IIRC when I ran into a similar issue on skl years ago it was causing the hardware to fall over pretty hard as well. And let's be consistent and include i965/g4x in the check as well, just in case I just got super lucky somehow when I wasn't able to reproduce the issue. Not that it really matters since we still use 4k SURF alignment for i965/g4x anyway. Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv") Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb") Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2021-02-09drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing itImre Deak
The TypeC FIA can be powered down if the TC-COLD power state is allowed, so block the TC-COLD state when initializing the FIA. Note that this isn't needed on ICL where the FIA is never modular and which has no generic way to block TC-COLD (except for platforms with a legacy TypeC port and on those too only via these legacy ports, not via a DP-alt/TBT port). Cc: <stable@vger.kernel.org> # v5.10+ Cc: José Roberto de Souza <jose.souza@intel.com> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3027 Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208154303.6839-1-imre.deak@intel.com Reviewed-by: Jos� Roberto de Souza <jose.souza@intel.com>
2021-02-09i915/perf: Add additional OA formats for gen12Umesh Nerlige Ramappa
Gen12 supports additional OA formats as compared to what was added earlier. Include the additional OA formats. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-3-umesh.nerlige.ramappa@intel.com
2021-02-09i915/perf: Move OA formats to single arrayUmesh Nerlige Ramappa
Variations in OA formats in the different gens has led to creation of several sparse arrays to store the formats. Move oa formats into a single array and format_mask to check for platform specific oa formats. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-2-umesh.nerlige.ramappa@intel.com
2021-02-09i915/perf: Store a mask of valid OA formats for a platformUmesh Nerlige Ramappa
Validity of an OA format is checked by using a sparse array of formats per gen. Instead maintain a mask of supported formats for a platform in the perf object. v2: Use set_bit and test_bit style for the format_mask (Chris) Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208174029.45621-1-umesh.nerlige.ramappa@intel.com
2021-02-08drm/i915/rkl: Remove require_force_probe protectionTejas Upadhyay
Removing force probe protection from RKL platform. Did not observe warnings, errors, flickering or any visual defects while doing ordinary tasks like browsing and editing documents in a two monitor setup. Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130124855.319226-1-tejaskumarx.surendrakumar.upadhyay@intel.com
2021-02-08drm/i915: Fix HAS_LSPCON macro for platforms between GEN9 and GEN10Ankit Nautiyal
Legacy LSPCON chip from MCA and Parade is only used for platforms between GEN9 and GEN10. Fixing the HAS_LSPCON macro to reflect the same. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210208055554.24357-1-ankit.k.nautiyal@intel.com
2021-02-08drm/i915: refactor skylake scaler code into new file.Dave Airlie
This moves the code from various places and consolidates it into one new file. v2: - rename skl_program_plane -> skl_program_plane_scaler (Ville) - also move skl_pfit_enable, and consequently make some skl_scaler_* functions static to skl_scaler.c (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: migrate i9xx plane get configDave Airlie
Migrate this code out like the skylake code. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c003bd458a6bcc703e9e2fb05731fb7124012e8c.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: migrate pll enable/disable code to intel_dpll.[ch]Dave Airlie
This moves the older i9xx/vlv/chv enable/disable to dpll file. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7fa8c76b0f07f3ede9efd7c1f989f33fbc8c53a3.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: move is_ccs_modifier to an inlineDave Airlie
There is no need for this to be out of line. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bb73a151b7b780f927edeb7e121449446592805d.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: split fb scalable checks into g4x and skl versionsDave Airlie
This just cleans these up a bit. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c91d924e93965515d2017dbf3c89c245ff6d52ea.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: move pipe update code into crtc. (v2)Dave Airlie
Daniel suggested this should move here. v2: move vrr code. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/738c7aaeb63c7d2357ddd932f18787ec8a3cefeb.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: migrate skl planes code new file (v5)Dave Airlie
Rework the plane init calls to do the gen test one level higher. Rework some of the plane helpers so they can live in new file, there is still some scope to clean up the plane/fb interactions later. v2: drop atomic code back, rename file to Ville suggestions, add header file. v3: move scaler bits back v4: drop wrong new includes (Ville) v5: integrate the ccs gen12 changes v6: fix unrelated code movement (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> [Jani: fixed up sparse warnings.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4e88a5c6b9ab3b93cc2b6c7d78c26ae86f6abbd0.1612536383.git.jani.nikula@intel.com
2021-02-05drm/i915: Use intel_hdmi_port_clock() moreVille Syrjälä
Replace the hand rolled intel_hdmi_port_clock() stuff with the real thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204020846.2094-2-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-02-05drm/i915: Index min_{cdclk,voltage_level}[] with pipeVille Syrjälä
min_cdclk[] and min_voltage_level[] are supposed to be indexed with the pipe. Fix up a few cases where we index via the crtc index (via the atomic iterators) instead. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204020846.2094-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-02-05drm/i915: migrate hsw fdi code to new file.Dave Airlie
Daniel asked for this, but it's a bit messy and I'm not sure how best to clean it up yet. Signed-off-by: Dave Airlie <airlied@redhat.com> [Jani: also moved fdi buf trans to intel_fdi.c.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/44491f2465549ea5c2e48cde5437fa232f77ab96.1612467466.git.jani.nikula@intel.com
2021-02-05drm/i915: refactor ddi translations into a separate file (v2)Dave Airlie
Ville suggested this, these tables are probably better being standalone. This fixes up the cnl/bxt interfaces to be like the others, the intel one I left alone since it has a few extra entrypoints. v2: add back missing rocketlake bits. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> [Jani: made some functions static] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/def9eed2581d71863ccdf35f323b525facc2482c.1612467466.git.jani.nikula@intel.com
2021-02-05drm/i915: Make psr_safest_params and enable_psr2_sel_fetch parameters read onlyJosé Roberto de Souza
By mistake those 2 parameters were defined as read and write in the .h file while in the .c file it is read only. The intention here was to be read only to avoid the need of additional handling. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Petri Latvala <petri.latvala@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204153357.39681-1-jose.souza@intel.com
2021-02-05drm/i915/display: Remove PSR2 on JSL and EHLEdmund Dea
While JSL and EHL eDP transcoder supports PSR2, the phy of this platforms only supports eDP 1.3, so removing PSR2 support as this feature was added in eDP 1.4. Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204175830.97857-1-jose.souza@intel.com
2021-02-05drm/i915/display: Support Multiple Transcoders' PSR status on debugfsGwan-gyeong Mun
In order to support the PSR state of each transcoder, it adds i915_psr_status to sub-directory of each transcoder. v2: Change using of Symbolic permissions 'S_IRUGO' to using of octal permissions '0444' v5: Addressed JJani Nikula's review comments - Remove checking of Gen12 for i915_psr_status. - Add check of HAS_PSR() - Remove meaningless check routine. Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-2-gwan-gyeong.mun@intel.com
2021-02-05drm/i915/display: Support PSR Multiple InstancesGwan-gyeong Mun
It is a preliminary work for supporting multiple EDP PSR and DP PanelReplay. And it refactors singleton PSR to Multi Transcoder supportable PSR. And this moves and renames the i915_psr structure of drm_i915_private's to intel_dp's intel_psr structure. It also causes changes in PSR interrupt handling routine for supporting multiple transcoders. But it does not change the scenario and timing of enabling and disabling PSR. And it not support multiple pipes with a single transcoder PSR case yet. v2: Fix indentation and add comments v3: Remove Blank line v4: Rebased v5: Rebased and Addressed Anshuman's review comment. - Move calling of intel_psr_init() to intel_dp_init_connector() v6: Address Anshuman's review comments - Remove wrong comments and add comments for a limit of supporting of a single pipe PSR v7: Update intel_psr_compute_config() for supporting multiple transcoder PSR on BDW+ v8: Address Anshuman's review comments - Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn() v9: Fix commit message v10: Rebased v11: Address Jose's review comment. - Reorder calling order of intel_psr2_program_trans_man_trk_ctl(). - In order to reduce changes keep the old name for drm_i915_private. - Change restrictions of multiple instances of PSR. v12: Address Jose's review comment. - Change the calling of intel_psr2_program_trans_man_trk_ctl() into commit_pipe_config(). - Change a checking order of CAN_PSR() and connector_status to original on i915_psr_sink_status_show(). - Drop unneeded intel_dp_update_pipe() function. - In order to wait a specific encoder which belong to crtc_state on intel_psr_wait_for_idle(), add checking of encoder. - Add an whitespace to comments. v13: Rebased and Address Jose's review comment. - Add and use for_each_intel_psr_enabled_encoder() macro. - In order to use correct frontbuffer_bit for each pipe, fix intel_psr_invalidate() and intel_psr_flush(). - Remove redundant or unneeded codes. - Update comments. v14: Address Jose's review comment - Add and use for_each_intel_encoder_can_psr() macro and for_each_intel_encoder_mask_can_psr() macro. - Add source_support member variable into intel_psr structure. - Update CAN_PSR() macro that checks source_support. - Move encoder's PSR availity check to psr_init() from psr_compute_config(). - Remove redundant or unneeded codes. v15: Remove wrong mutex lock/unlock of PSR from intel_psr2_program_trans_man_trk_ctl() Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com
2021-02-05drm/i915/display: support ddr5 mem typesClint Taylor
Add DDR5 and LPDDR5 return values from punit fw. BSPEC: 54023 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204200458.21875-1-clinton.a.taylor@intel.com
2021-02-05drm/i915: Reject 446-480MHz HDMI clock on GLKVille Syrjälä
The BXT/GLK DPLL can't generate certain frequencies. We already reject the 233-240MHz range on both. But on GLK the DPLL max frequency was bumped from 300MHz to 594MHz, so now we get to also worry about the 446-480MHz range (double the original problem range). Reject any frequency within the higher problematic range as well. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3000 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210203093044.30532-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-02-04drm/i915: Disable runtime power management during shutdownImre Deak
At least on some TGL platforms PUNIT wants to access some display HW registers, but it doesn't handle display power management (disabling DC states as required) and so this register access will lead to a hang. To prevent this disable runtime power management for poweroff and reboot. v2: - Add code comment clarifying the requirement of display power states. (Ville) Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127181909.128094-1-imre.deak@intel.com
2021-02-04drm/i915/display: fix spelling mistake "Couldnt" -> "Couldn't"Colin Ian King
There is a spelling mistake in a drm_dbg message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210203110803.17894-1-colin.king@canonical.com
2021-02-02Merge tag 'topic/drm-device-pdev-2021-02-02' of ↵Jani Nikula
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - drm/i915: Remove references to struct drm_device.pdev Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y2g6fxxv.fsf@intel.com
2021-02-02drm/i915/gvt: Remove references to struct drm_device.pdevThomas Zimmermann
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-4-tzimmermann@suse.de
2021-02-02drm/i915/gt: Remove references to struct drm_device.pdevThomas Zimmermann
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-3-tzimmermann@suse.de
2021-02-02drm/i915: Remove references to struct drm_device.pdevThomas Zimmermann
Using struct drm_device.pdev is deprecated. Convert i915 to struct drm_device.dev. No functional changes. v6: * also remove assignment in selftests/ in a later patch (Chris) v5: * remove assignment in later patch (Chris) v3: * rebased v2: * move gt/ and gvt/ changes into separate patches Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128133127.2311-2-tzimmermann@suse.de
2021-02-02Merge tag 'topic/adl-s-enabling-2021-02-01-1' of ↵Jani Nikula
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - Add basic support for Alder Lake S, to be shared between drm-intel-next and drm-intel-gt-next Signed-off-by: Jani Nikula <jani.nikula@intel.com> # Conflicts: # drivers/gpu/drm/i915/i915_drv.h From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210202025620.2212559-1-lucas.demarchi@intel.com
2021-02-01drm/i915/adl_s: Add GT and CTX WAs for ADL-SAditya Swarup
- Extend Wa_1606931601 and Wa_1409804808 to ADL-S. - Extend Wa_14010919138 and Wa_14010229206 to ADL-S (Madhumitha) - Extend Wa_22010271021 to ADLS (cyokoyam) v2: - Extend Wa_1409804808 and remove unnecessary branching/redundant adls workaround placeholder functions. - Split WAs properly based on previous platforms and applicable ADLS WA. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-9-aditya.swarup@intel.com
2021-02-01drm/i915/adl_s: Add display WAs for ADL-SAditya Swarup
- Extend permanent driver WA Wa_1409767108, Wa_14010685332 and Wa_14011294188 to adl-s. - Extend permanent driver WA Wa_1606054188 to adl-s. - Add Wa_14011765242 for adl-s A0 stepping. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-8-aditya.swarup@intel.com
2021-02-01drm/i915/adl_s: Update memory bandwidth parametersTejas Upadhyay
Just like RKL, the ADL_S platform also has different memory characteristics from past platforms. Update the values used by our memory bandwidth calculations accordingly. v2: Fix minor nitpick for shifting ADLS case above RKL(based on platform order).(mdroper) Bspec: 64631 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-7-aditya.swarup@intel.com
2021-02-01drm/i915/adl_s: Load DMCAnusha Srivatsa
Load DMC on ADL_S v2.01. This is the first offcial release of DMC for ADL_S. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-6-aditya.swarup@intel.com
2021-02-01drm/i915/display: Add HAS_D12_PLANE_MINIMIZATIONJosé Roberto de Souza
- As RKL and ADL-S only have 5 planes, primary and 4 sprites and the cursor plane, let's group the handling together under HAS_D12_PLANE_MINIMIZATION. - Also use macro to select pipe irq fault error mask. BSpec: 49251 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-5-aditya.swarup@intel.com
2021-02-01drm/i915/adl_s: Re-use TGL GuC/HuC firmwareMatt Roper
ADL-S, like RKL, uses the same internal device ID for the GuC and HuC as TGL did, making them all firmware-compatible. Let's re-use TGL's firmware for ADL-S. Bspec: 50668 Cc: John Harrison <John.C.Harrison@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-4-aditya.swarup@intel.com
2021-02-01drm/i915/adl_s: Add power wellsLucas De Marchi
TGL power wells can be re-used for ADL-S with the exception of the fake power well for TC_COLD, just like DG-1. BSpec: 53597 Bspec: 49231 Cc: Imre Deak <imre.deak@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-3-aditya.swarup@intel.com
2021-02-01drm/i915/adl_s: Update PHY_MISC programmingMatt Roper
ADL-S switches up which PHYs are considered a master to other PHYs; PHY-C is no longer a master, but PHY-D is now. Bspec: 49291 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Aditya Swarup <aditya.swarup@intel.com> Reviewed-by: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129182945.217078-2-aditya.swarup@intel.com
2021-02-01drm/i915/bios: tidy up child device debug loggingJani Nikula
Make the child device details easier to read by turning this: [drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] VBT HDMI level shift for port B: 8 [drm:parse_ddi_port [i915]] VBT DP max link rate for port B: 810000 [drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] VBT HDMI level shift for port C: 8 [drm:parse_ddi_port [i915]] VBT (e)DP boost level for port C: 3 [drm:parse_ddi_port [i915]] VBT HDMI boost level for port C: 1 [drm:parse_ddi_port [i915]] VBT DP max link rate for port C: 810000 into this: [drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] Port B VBT HDMI level shift: 8 [drm:parse_ddi_port [i915]] Port B VBT DP max link rate: 810000 [drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 [drm:parse_ddi_port [i915]] Port C VBT HDMI level shift: 8 [drm:parse_ddi_port [i915]] Port C VBT (e)DP boost level: 3 [drm:parse_ddi_port [i915]] Port C VBT HDMI boost level: 1 [drm:parse_ddi_port [i915]] Port C VBT DP max link rate: 810000 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127084534.24406-1-jani.nikula@intel.com
2021-02-01drm/i915/hdcp: disable the QSES check for HDCP2.2 over MSTJuston Li
Like the patch to disable QSES for HDCP 1.4 over MST https://patchwork.freedesktop.org/patch/415297/ the HDCP2.2 spec doesn't require QSES as well and we've seen QSES not supported on a couple HDCP2.2 docks so far (Dell WD19 and Lenovo LDC-G2) Remove it for now until we get a better idea of how widely supported QSES is and how to support it optionally. Signed-off-by: Juston Li <juston.li@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210127065034.2501119-4-juston.li@intel.com
2021-01-30drm/i915: Don't check tc_mode unless dealing with a TC PHYVille Syrjälä
We shouldn't really trust tc_mode on non-TC PHYs since we never initialize it explicitly. So let's check for the PHY type first. Fortunately TC_PORT_TBT_ALT happens to be zero so I don't think there's an actual bug here, just a possibility for a future one if someone rearranges the enum values. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-5-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2021-01-30drm/i915: Move HDMI vswing programming to the right placeVille Syrjälä
The documented programming sequence indicates the correct point for the vswing programming is just before we enable the DDI. Make it so. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210128155948.13678-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 05:24:28 +0000