summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-13arm64: dts: renesas: rzg2: Add interrupt properties to watchdog nodesWolfram Sang
Driver doesn't use it yet, but let's describe the HW properly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220322095512.4707-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13arm64: dts: renesas: rcar-gen3: Add interrupt properties to watchdog nodesWolfram Sang
Driver doesn't use it yet, but let's describe the HW properly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220322095512.4707-4-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13ARM: dts: rzg1: Add interrupt properties to watchdog nodesWolfram Sang
Driver doesn't use it yet, but let's describe the HW properly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220322095512.4707-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13ARM: dts: rcar-gen2: Add interrupt properties to watchdog nodesWolfram Sang
Driver doesn't use it yet, but let's describe the HW properly. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220322095512.4707-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13dt-bindings: clock: Add R9A07G043 CPG Clock and Reset DefinitionsBiju Das
Define RZ/G2UL (R9A07G043U) Clock Pulse Generator Core Clock and module clock outputs, as listed in Table 7.1.4.2 ("Clock List r0.51") and also add Reset definitions referring to registers CPG_RST_* in Section 7.2.3 ("Register configuration") of the RZ/G2UL Hardware User's Manual (Rev. 0.51, Nov. 2021). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220402073037.23947-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-13dt-bindings: arm: renesas: Document Renesas RZ/G2UL SMARC EVKBiju Das
Document the Renesas SMARC EVK board which is based on the Renesas RZ/G2UL Type-1 (R9A07G043U11) SoC. The SMARC EVK consists of an RZ/G2UL Type-1 SoM module and a SMARC carrier board. The SoM module sits on top of the carrier board. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220402073234.24625-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-11ARM: dts: Drop custom clkctrl compatible and update omap5 l4perTony Lindgren
We can now use the clock-output-names and don't need custom compatible values for each clkctrl instance. And we can use a generic name also for the clock manager instance. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-5-tony@atomide.com>
2022-04-11ARM: dts: Add clock-output-names for omap5Tony Lindgren
To stop using the non-standard node name based clock naming, let's first add the clock-output-names property. This allows us to stop using the internal legacy clock naming and unify the naming for the TI SoCs in the following patches. Note that we must wait on fixing the node naming issues until after the internal clock names have been updated to avoid adding name translation unnecessarily. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-4-tony@atomide.com>
2022-04-11ARM: dts: Drop custom clkctrl compatible and update omap4 l4perTony Lindgren
We can now use the clock-output-names and don't need custom compatible values for each clkctrl instance. And we can use a generic name also for the clock manager instance. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-3-tony@atomide.com>
2022-04-11ARM: dts: Add clock-output-names for omap4Tony Lindgren
To stop using the non-standard node name based clock naming, let's first add the clock-output-names property. This allows us to stop using the internal legacy clock naming and unify the naming for the TI SoCs in the following patches. Note that we must wait on fixing the node naming issues until after the internal clock names have been updated to avoid adding name translation unnecessarily. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204084339.12341-2-tony@atomide.com>
2022-04-11ARM: dts: Use clock-output-names for am4Tony Lindgren
With the TI clocks supporting the use of clock-output-names devicetree property, we no longer need to use non-standard node names for clocks. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204081529.57694-1-tony@atomide.com>
2022-04-11ARM: dts: Use clock-output-names for dra7Tony Lindgren
With the TI clocks supporting the use of clock-output-names devicetree property, we no longer need to use non-standard node names for clocks. Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl") Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section") Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204080842.40673-1-tony@atomide.com>
2022-04-11ARM: dts: Use clock-output-names for am3Tony Lindgren
With the TI clocks supporting the use of clock-output-names devicetree property, we no longer need to use non-standard node names for clocks. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-5-tony@atomide.com>
2022-04-11ARM: dts: Add clksel node for am3 clkoutTony Lindgren
Let's add a clksel node for the component clocks to avoid devicetree unique_unit_address warnings. The component clocks can now get IO address from the parent clksel node. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-4-tony@atomide.com>
2022-04-11ARM: dts: Add clksel node for am3 gfxTony Lindgren
Let's add a clksel node for the component clocks to avoid devicetree unique_unit_address warnings. The component clocks can now get IO address from the parent clksel node. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-3-tony@atomide.com>
2022-04-11ARM: dts: Add clksel node for am3 ehrpwmTony Lindgren
Let's add a clksel node for the component clocks to avoid devicetree unique_unit_address warnings. The component clocks can now get IO address from the parent clksel node. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Message-Id: <20220204073333.18175-2-tony@atomide.com>
2022-04-11dt-bindings: clock: ti: Add clock-output-names for TI composite clocksTony Lindgren
For the TI composite clocks, we currently have only the divider clock list clock-output-names as an optional devicetree property. Let's add clock-output-names for all the TI composite clock bindings. This allows us to use clock-output-names for the clockctrl instance name instead of relying on a custom compatible or non-standard node names. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Message-Id: <20220203112337.19821-3-tony@atomide.com>
2022-04-11dt-bindings: clock: ti: Add clock-output-names for clockctrlTony Lindgren
This allows us to use clock-output-names for the clockctrl instance name instead of relying on a custom compatible or non-standard node names. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Message-Id: <20220203112337.19821-2-tony@atomide.com>
2022-04-11dt-bindings: omap: Add clock-output-names and #clock-cellsTony Lindgren
This allows us to use clock-output-names for the clock manager instance name instead of relying on non-standard node names. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <robh@kernel.org> Message-Id: <20220203112337.19821-1-tony@atomide.com>
2022-04-11arm64: dts: meson: alpa sort the board MakefileChristian Hewitt
Let's alpha-sort the board Makefile to keep things organised. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220409064257.24453-1-christianshewitt@gmail.com
2022-04-11arm64: dts: renesas: spider: Add Ethernet sub-boardGeert Uytterhoeven
Add a DTS file for the Spider Ether TSN sub-board (RTP8A779F0ASKB0ST0S), and include it from the main r8a779f0-spider.dts. For now its contents are limited to the Board ID EEPROM. Extracted from a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/5aa58816182b34d9e5795bc1e22784f4e4879d13.1643898884.git.geert+renesas@glider.be
2022-04-11arm64: dts: renesas: spider-cpu: Add I2C4 and EEPROMsGeert Uytterhoeven
Enable the I2C4 bus on the Falcon CPU board, and describe the I2C EEPROMs present on the Spider CPU and BreakOut boards. Extracted from a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/6d8917e49f83b6a932970ca169100eb086d11f16.1643898884.git.geert+renesas@glider.be
2022-04-11arm64: dts: renesas: r8a779f0: Add I2C nodesGeert Uytterhoeven
Add device nodes for the I2C Bus Interfaces on the Renesas R-Car S4-8 (R8A779F0) SoC. Based on a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e1c7fb17801bc82a74aa5364212d02ba51535dd2.1643898884.git.geert+renesas@glider.be
2022-04-09ARM: dts: s5pv210: align DMA channels with dtschemaKrzysztof Kozlowski
dtschema expects DMA channels in specific order (tx, rx and tx-sec). The order actually should not matter because dma-names is used however let's make it aligned with dtschema to suppress warnings like: i2s@eee30000: dma-names: ['rx', 'tx', 'tx-sec'] is not valid under any of the given schemas Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Co-developed-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/CY4PR04MB056779A9C50DC95987C5272ACB1C9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-09ARM: dts: s5pv210: Adjust DMA node names to match specJonathan Bakker
DMA node names should be dma-controller according to the DT spec, so rename them from pdma/mdma. Prevents warnings when running make dtbs_check Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/CY4PR04MB0567F52ABAE0A3CCD3C7CE59CB1C9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-09ARM: dts: s5pv210: Adjust memory reg entries to match specJonathan Bakker
The reg property of memory nodes should have pairs of offset, size; not all memory banks lumped in as one. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/CY4PR04MB05677849A13F41BF603906DFCB1C9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-09ARM: dts: s5pv210: Correct interrupt name for bluetooth in AriesJonathan Bakker
Correct the name of the bluetooth interrupt from host-wake to host-wakeup. Fixes: 1c65b6184441b ("ARM: dts: s5pv210: Correct BCM4329 bluetooth node") Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/CY4PR04MB0567495CFCBDC8D408D44199CB1C9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-09ARM: dts: s5pv210: Remove spi-cs-high on panel in AriesJonathan Bakker
Since commit 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors"), the panel has been blank due to an inverted CS GPIO. In order to correct this, drop the spi-cs-high from the panel SPI device. Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/CY4PR04MB05670C771062570E911AF3B4CB1C9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-04-08arm64: dts: synaptics: remove unused DTSI for AS370Krzysztof Kozlowski
The as370.dtsi for Synaptics AS370 SoC does not have a user (DTS board file), is uncompilable and untestable. It was added back in 2018. No user appeared since that time, so assume it won't be added. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08iommu/omap: Fix regression in probe for NULL pointer dereferenceTony Lindgren
Commit 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") started triggering a NULL pointer dereference for some omap variants: __iommu_probe_device from probe_iommu_group+0x2c/0x38 probe_iommu_group from bus_for_each_dev+0x74/0xbc bus_for_each_dev from bus_iommu_probe+0x34/0x2e8 bus_iommu_probe from bus_set_iommu+0x80/0xc8 bus_set_iommu from omap_iommu_init+0x88/0xcc omap_iommu_init from do_one_initcall+0x44/0x24 This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV) as noted by Jason Gunthorpe <jgg@ziepe.ca>. Looks like the regression already happened with an earlier commit 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") that changed the function return type and missed converting one place. Cc: Drew Fustini <dfustini@baylibre.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Suman Anna <s-anna@ti.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Fixes: 6785eb9105e3 ("iommu/omap: Convert to probe/release_device() call-backs") Fixes: 3f6634d997db ("iommu: Use right way to retrieve iommu_ops") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Drew Fustini <dfustini@baylibre.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-04-08ARM: dts: meson: align SPI NOR node name with dtschemaKrzysztof Kozlowski
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220407142159.293836-1-krzysztof.kozlowski@linaro.org
2022-04-08arm64: dts: meson: align SPI NOR node name with dtschemaKrzysztof Kozlowski
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220407142159.293836-2-krzysztof.kozlowski@linaro.org
2022-04-07ARM: dts: socfpga: align interrupt controller node name with dtschemaKrzysztof Kozlowski
Fixes dtbs_check warnings like: $nodename:0: 'intc@fffed000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220317115705.450427-2-krzysztof.kozlowski@canonical.com
2022-04-07ARM: dts: ox820: align interrupt controller node name with dtschemaKrzysztof Kozlowski
Fixes dtbs_check warnings like: gic@1000: $nodename:0: 'gic@1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220317115705.450427-1-krzysztof.kozlowski@canonical.com
2022-04-07ARM: dts: nspire: use lower case hex addresses in node unit addressesKrzysztof Kozlowski
Convert all hex addresses in node unit addresses to lower case to fix dt_binding_check and dtc W=1 warnings. Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/nspire* $ sed -e 's/<0x\([a-zA-Z0-9_-]*\) /<0x\L\1 /g' -i arch/arm/boot/dts/nspire* Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220317115542.450032-2-krzysztof.kozlowski@canonical.com
2022-04-06ARM: dts: ux500: Add GPS to Skomer device treeLinus Walleij
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-06ARM: dts: ux500: Add GPS to Janice device treeLinus Walleij
This adds the CSR GSD4t GPS to the Janice device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ux500: Add line impedance to fuel gaugeLinus Walleij
The line impedance is used to improve battery capacity estimation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ux500: Register Amstaos proximity sensorLinus Walleij
The proximity sensor on the Codina is actually an Amstaos TMD2672, not Mouser, so alter the DTS to reflect this. Tested successfully with the IIO driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ux500: Add Codina TMO device treeLinus Walleij
This adds a device tree for "Codina TMO" also known as Samsung Galaxy Exhibit or Samsung SGH-T599. It is quite different from the vanilla Codina despite sharing the same board file in the vendor tree. Fix up some comments in the Codina DTS while we're at it. Cc: phone-devel@vger.kernel.org Cc: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220222233313.1774416-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04dt-bindings: arm: ux500: Document Codina-TMOLinus Walleij
This is a U8500-based phone named Samsung Galaxy Exhibit or Samsung SGH-T599, codenamed "Codina TMO" as it was made for T-Mobile. Cc: phone-devel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220222233313.1774416-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: ste-dbx: Update spi clock-names propertyKuldeep Singh
Now that spi pl022 binding only accept "sspclk" as clock name, ST ericsson platform with "SSPCLK" clock name start raising dtbs_check warnings. Make necessary changes to update this property in order to make it compliant with binding. clock-names:0: 'sspclk' was expected Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Link: https://lore.kernel.org/r/20220312113853.63446-5-singh.kuldeep87k@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-04ARM: dts: s5pv210: Use standard arrays of generic PHYs for EHCI/OHCI deviceKrzysztof Kozlowski
Move USB PHYs to a standard arrays for S5PV210 EHCI/OHCI devices. This resolves the conflict between S5PV210 EHCI/OHCI sub-nodes and generic USB device bindings. Suggested-by: Måns Rullgård <mans@mansr.com> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220314181948.246434-3-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: s5pv210: align EHCI/OHCI nodes with dtschemaKrzysztof Kozlowski
The node names should be generic and USB DT schema expects "usb" names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220314181948.246434-2-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: exynos: align EHCI/OHCI nodes with dtschema on Exynos4Krzysztof Kozlowski
The node names should be generic and USB DT schema expects "usb" names. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220314181948.246434-1-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: exynos: drop deprecated SFR region from MIPI phyKrzysztof Kozlowski
Commit e4b3d38088df ("phy: exynos-video-mipi: Fix regression by adding support for PMU regmap") deprecated the usage of unit address in MIPI phy node, in favor of a syscon phandle. Deprecating was a correct approach because that unit address was actually coming from Power Management Unit SFR range so its usage here caused overlapped memory mapping. In 2016 commit 26dbadba495f ("phy: exynos-mipi-video: Drop support for direct access to PMU") fully removed support for parsing that MIPI phy unit address (SFR range) but the address stayed in Exynos5250 DTSI for compatibility reasons. Remove that deprecated unit address from Exynos5250 MIPI phy, because it has been almost 6 years since it was deprecated and it causes now DT schema validation warnings: video-phy@10040710: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Any out-of-tree users of Exynos5250 DTSI, should update their code to use newer syscon property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar<alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220314184113.251013-1-krzysztof.kozlowski@canonical.com
2022-04-04arm64: dts: tesla: add a specific compatible to MCT on FSDKrzysztof Kozlowski
One compatible is used for the Multi-Core Timer on Tesla FSD SoC, which is correct but not specific enough. The MCT blocks have different number of interrupts, so add a second specific compatible to Tesla FSD. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220304122424.307885-5-krzysztof.kozlowski@canonical.com
2022-04-04arm64: dts: exynos: add a specific compatible to MCTKrzysztof Kozlowski
One compatible is used for the Multi-Core Timer on most of the Samsung Exynos SoCs, which is correct but not specific enough. These MCT blocks have different number of interrupts, so add a second specific compatible to Exynos5433 and Exynos850. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220304122424.307885-4-krzysztof.kozlowski@canonical.com
2022-04-04ARM: dts: exynos: add a specific compatible to MCTKrzysztof Kozlowski
One compatible is used for the Multi-Core Timer on most of the Samsung Exynos SoCs, which is correct but not specific enough. These MCT blocks have different number of interrupts, so add a second specific compatible to Exynos3250 and all Exynos5 SoCs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220304122424.307885-3-krzysztof.kozlowski@canonical.com
2022-04-04arm64: dts: exynos: move aliases to board in Exynos850Krzysztof Kozlowski
The aliases for typical blocks which are disabled by default in DTSI (like I2C, UART and MMC) should be defined in the board DTS. The board should add aliases only for enabled blocks according to its specific order. On Exynos850, move aliases of enabled blocks to E850-96 board and remove unused ones. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220221075219.10827-1-krzysztof.kozlowski@canonical.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 00:49:02 +0000