| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- We currently enable DIPM (device initiated power management) in the
device (using a SET FEATURES call to the device), regardless if the
HBA supports any LPM states or not. It seems counter intuitive, and
potentially dangerous to enable a device side feature, when the HBA
does not have the corresponding support. Thus, make sure that we do
not enable DIPM if the HBA does not support any LPM states.
* tag 'ata-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Do not enable LPM if no LPM states are supported by the HBA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Three fixes for the pwm-stm32 driver.
The first patch prevents an integer wrap-around for small periods. In
the second patch the calculation of the prescaler is fixed which
resulted in values for the ARR register that don't fit into the
corresponding register bit field. The last commit improves an error
message that was wrongly copied from another error path"
* tag 'pwm/for-6.10-rc5-fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix error message to not describe the previous error path
pwm: stm32: Fix calculation of prescaler
pwm: stm32: Refuse too small period requests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are seven oneline patches that each address a distinct problem
on the NXP i.MX platform, mostly the popular i.MX8M variant.
The only other two fixes are for error handling on the psci firmware
driver and SD card support on the milkv duo riscv board"
* tag 'arm-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: psci: Fix return value from psci_system_suspend()
riscv: dts: sophgo: disable write-protection for milkv duo
arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmc
arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pin
arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' property
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIO
arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting node
arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoM
arm64: dts: freescale: imx8mm-verdin: Fix GPU speed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some hw breakpoint fixes, an objtool build warnging fix, and a trivial
cleanup"
* tag 'loongarch-fixes-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Remove an unneeded semicolon
LoongArch: Fix multiple hardware watchpoint issues
LoongArch: Trigger user-space watchpoints correctly
LoongArch: Fix watchpoint setting error
LoongArch: Only allow OBJTOOL & ORC unwinder if toolchain supports -mthin-add-sub
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix dangling references to a redistributor region if the vgic was
prematurely destroyed.
- Properly mark FFA buffers as released, ensuring that both parties
can make forward progress.
x86:
- Allow getting/setting MSRs for SEV-ES guests, if they're using the
pre-6.9 KVM_SEV_ES_INIT API.
- Always sync pending posted interrupts to the IRR prior to IOAPIC
route updates, so that EOIs are intercepted properly if the old
routing table requested that.
Generic:
- Avoid __fls(0)
- Fix reference leak on hwpoisoned page
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are
atomic.
- Fix bug in __kvm_handle_hva_range() where KVM calls a function
pointer that was intended to be a marker only (nothing bad happens
but kind of a mine and also technically undefined behavior)
- Do not bother accounting allocations that are small and freed
before getting back to userspace.
Selftests:
- Fix compilation for RISC-V.
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using
GuestMaxPhyAddr from KVM's supported CPUID (if it's available)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SEV-ES: Fix svm_get_msr()/svm_set_msr() for KVM_SEV_ES_INIT guests
KVM: Discard zero mask with function kvm_dirty_ring_reset
virt: guest_memfd: fix reference leak on hwpoisoned page
kvm: do not account temporary allocations to kmem
MAINTAINERS: Drop Wanpeng Li as a Reviewer for KVM Paravirt support
KVM: x86: Always sync PIR to IRR prior to scanning I/O APIC routes
KVM: Stop processing *all* memslots when "null" mmu_notifier handler is found
KVM: arm64: FFA: Release hyp rx buffer
KVM: selftests: Fix RISC-V compilation
KVM: arm64: Disassociate vcpus from redistributor region on teardown
KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin()
KVM: selftests: x86: Prioritize getting max_gfn from GuestPhysBits
KVM: selftests: Fix shift of 32 bit unsigned int more than 32 bits
|
|
"Failed to lock the clock" is an appropriate error message for
clk_rate_exclusive_get() failing, but not for the clock running too
fast for the driver's calculations.
Adapt the error message accordingly.
Fixes: d44d635635a7 ("pwm: stm32: Fix for settings using period > UINT32_MAX")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/285182163211203fc823a65b180761f46e828dcb.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
A small prescaler is beneficial, as this improves the resolution of the
duty_cycle configuration. However if the prescaler is too small, the
maximal possible period becomes considerably smaller than the requested
value.
One situation where this goes wrong is the following: With a parent
clock rate of 208877930 Hz and max_arr = 0xffff = 65535, a request for
period = 941243 ns currently results in PSC = 1. The value for ARR is
then calculated to
ARR = 941243 * 208877930 / (1000000000 * 2) - 1 = 98301
This value is bigger than 65535 however and so doesn't fit into the
respective register field. In this particular case the PWM was
configured for a period of 313733.4806027616 ns (with ARR = 98301 &
0xffff). Even if ARR was configured to its maximal value, only period =
627495.6861167669 ns would be achievable.
Fix the calculation accordingly and adapt the comment to match the new
algorithm.
With the calculation fixed the above case results in PSC = 2 and so an
actual period of 941229.1667195285 ns.
Fixes: 8002fbeef1e4 ("pwm: stm32: Calculate prescaler with a division instead of a loop")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b4d96b79917617434a540df45f20cb5de4142f88.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
pairs
This not only includes rewording, but also where to put which emphasis
on terms in this document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Because Linux can be a target as well, add terminology to differentiate
between Linux being the target and Linux accessing targets.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
We now have the updated I2C specs and our own Code of Conduct, so we
have all we need to switch over to the inclusive terminology. Define
them here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Fastest I2C mode is 5 MHz. Update the docs and reword the paragraph
slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Luckily, the specs are directly downloadable again, so update the link.
Also update its title to the original name "I²C".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Change the first paragraphs to contain only one space after the end of
the previous sentence like in the rest of the document.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: one in the ufs driver fixing an obvious memory leak and the
other (with a core flag based update) trying to prevent USB crashes by
stopping the core from issuing a request for the I/O Hints mode page"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: usb: uas: Do not query the IO Advice Hints Grouping mode page for USB/UAS devices
scsi: core: Introduce the BLIST_SKIP_IO_HINTS flag
scsi: ufs: core: Free memory allocated for model before reinit
|
|
Pull drm fixes from Dave Airlie:
"Still pretty quiet, two weeks worth of amdgpu fixes, with one i915 and
one xe. I didn't get the drm-misc-fixes tree PR this week, but there
was only one fix queued and I think it can wait another week, so seems
pretty normal.
xe:
- Fix for invalid register access
i915:
- Fix conditions for joiner usage, it's not possible with eDP MSO
amdgpu:
- Fix display idle optimization race
- Fix GPUVM TLB flush locking scope
- IPS fix
- GFX 9.4.3 harvesting fix
- Runtime pm fix for shared buffers
- DCN 3.5.x fixes
- USB4 fix
- RISC-V clang fix
- Silence UBSAN warnings
- MES11 fix
- PSP 14.0.x fix"
* tag 'drm-fixes-2024-06-22' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/vf: Don't touch GuC irq registers if using memory irqs
drm/amdgpu: init TA fw for psp v14
drm/amdgpu: cleanup MES11 command submission
drm/amdgpu: fix UBSAN warning in kv_dpm.c
drm/radeon: fix UBSAN warning in kv_dpm.c
drm/amd/display: Disable CONFIG_DRM_AMD_DC_FP for RISC-V with clang
drm/amd/display: Attempt to avoid empty TUs when endpoint is DPIA
drm/amd/display: change dram_clock_latency to 34us for dcn35
drm/amd/display: Change dram_clock_latency to 34us for dcn351
drm/amdgpu: revert "take runtime pm reference when we attach a buffer" v2
drm/amdgpu: Indicate CU havest info to CP
drm/amd/display: prevent register access while in IPS
drm/amdgpu: fix locking scope when flushing tlb
drm/amd/display: Remove redundant idle optimization check
drm/i915/mso: using joiner is not possible with eDP MSO
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, one originating in this cycle and one from 6.6"
* tag 'ovl-fixes-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix encoding fid for lower only root
ovl: fix copy-up in tmpfile
|
|
Pull io_uring fix from Jens Axboe:
"Just a single cleanup for the fixed buffer iov_iter import.
More cosmetic than anything else, but let's get it cleaned up as it's
confusing"
* tag 'io_uring-6.10-20240621' of git://git.kernel.dk/linux:
io_uring/rsrc: fix incorrect assignment of iter->nr_segs in io_import_fixed
|
|
Pull rdma fixes from Jason Gunthorpe:
"Small bug fixes:
- Prevent a crash in bnxt if the en and rdma drivers disagree on the
MSI vectors
- Have rxe memcpy inline data from the correct address
- Fix rxe's validation of UD packets
- Several mlx5 mr cache issues: bad lock balancing on error, missing
propagation of the ATS property to the HW, wrong bucketing of freed
mrs in some cases
- Incorrect goto error unwind in mlx5 driver probe
- Missed userspace input validation in mlx5 SRQ create
- Incorrect uABI in MANA rejecting valid optional MR creation flags"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mana_ib: Ignore optional access flags for MRs
RDMA/mlx5: Add check for srq max_sge attribute
RDMA/mlx5: Fix unwind flow as part of mlx5_ib_stage_init_init
RDMA/mlx5: Ensure created mkeys always have a populated rb_key
RDMA/mlx5: Follow rb_key.ats when creating new mkeys
RDMA/mlx5: Remove extra unlock on error path
RDMA/rxe: Fix responder length checking for UD request packets
RDMA/rxe: Fix data copy for IB_SEND_INLINE
RDMA/bnxt_re: Fix the max msix vectors macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound fixes from Takashi Iwai:
"A follow-up fix for a random build issue, as well as another trivial
HD-audio quirk"
* tag 'sound-6.10-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: Use imply for suggesting CONFIG_SERIAL_MULTI_INSTANTIATE
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14AHP9
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These address a possible NULL pointer dereference in the ACPICA code
and quirk camera enumeration on multiple platforms where incorrect
data are present in the platform firmware.
Specifics:
- Undo an ACPICA code change that attempted to keep operation regions
within a page boundary, but allowed accesses to unmapped memory to
occur (Raju Rangoju)
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and
Raptor Lake models as that information is reported to be invalid on
the platforms in question (Hans de Goede)
- Use new Intel CPU model matching macros in the MIPI DisCo for
Imaging part of ACPI device enumeration (Hans de Goede)"
* tag 'acpi-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine."
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the Mediatek lvts_thermal driver, the Intel int340x driver,
and the thermal core (two issues related to system suspend).
Specifics:
- Remove the filtered mode for mt8188 from lvts_thermal as it is not
supported on this platform and fail the lvts_thermal initialization
when the golden temperature is zero as that means the efuse data is
not correctly set (Julien Panis)
- Update the processor_thermal part of the Intel int340x driver to
support shared interrupts as the processor thermal device interrupt
may in fact be shared with PCI devices (Srinivas Pandruvada)
- Synchronize the suspend-prepare and post-suspend actions of the
thermal PM notifier to avoid a destructive race condition and
change the priority of that notifier to the minimum to avoid
interference between the work items spawned by it and the other
PM notifiers during system resume (Rafael Wysocki)"
* tag 'thermal-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: processor_thermal: Support shared interrupts
thermal: core: Change PM notifier priority to the minimum
thermal: core: Synchronize suspend-prepare and post-suspend actions
thermal/drivers/mediatek/lvts_thermal: Return error in case of invalid efuse data
thermal/drivers/mediatek/lvts_thermal: Remove filtered mode for mt8188
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- kmemleak, error path handling and missing kmem_cache_destroy() fixes
for ioatdma driver
- use after free fix for idxd driver
- data synchronisation fix for xdma isr handling
- fsl driver channel constraints and linking two fsl module fixes
* tag 'dmaengine-fix-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ioatdma: Fix missing kmem_cache_destroy()
dt-bindings: dma: fsl-edma: fix dma-channels constraints
dmaengine: fsl-edma: avoid linking both modules
dmaengine: ioatdma: Fix kmemleak in ioat_pci_probe()
dmaengine: ioatdma: Fix error path in ioat3_dma_probe()
dmaengine: ioatdma: Fix leaking on version mismatch
dmaengine: ti: k3-udma-glue: Fix of_k3_udma_glue_parse_chn_by_id()
dmaengine: idxd: Fix possible Use-After-Free in irq_process_work_list
dmaengine: xilinx: xdma: Fix data synchronisation in xdma_channel_isr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for missing register offsets and correct N4
offsets for registers
* tag 'phy-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom: qmp-combo: Switch from V6 to V6 N4 register offsets
phy: qcom-qmp: pcs: Add missing v6 N4 register offsets
phy: qcom-qmp: qserdes-txrx: Add missing registers offsets
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Single fix for calling fwnode_handle_put() on the
returned fwnode pointer
* tag 'soundwire-6.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: fix usages of device_get_named_child_node()
|
|
into HEAD
KVM/riscv fixes for 6.10, take #2
- Fix compilation for KVM selftests
|
|
If period_ns is small, prd might well become 0. Catch that case because
otherwise with
regmap_write(priv->regmap, TIM_ARR, prd - 1);
a few lines down quite a big period is configured.
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Cc: stable@vger.kernel.org
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b86f62f099983646f97eeb6bfc0117bb2d0c340d.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
`inode->ei_flags` setting and cleaning should be done after initialization,
otherwise the operation is invalid.
Fixes: 9ca4853b98af ("bcachefs: Fix quota support for snapshots")
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
write_super() may reallocate the superblock buffer - but
bch_sb_field_ext was referencing it; don't use it after the write_super
call.
Reported-by: syzbot+8992fc10a192067b8d8a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
printk strings get truncated to 1024 bytes; if we have a long error
message (journal debug info) we need to use a helper.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
discard_new_inode() is the correct interface for tearing down an indoe
that was fully created but not made visible to other threads, but it
expects I_NEW to be set, which we don't use.
Reported-by: https://github.com/koverstreet/bcachefs/issues/690
Fixes: bcachefs: Fix race path in bch2_inode_insert()
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Incorrect bucket state transition in the discard path; when incrementing
a bucket's generation number that had already been discarded, we were
forgetting to check if it should be need_gc_gens, not free.
This was caught by the .invalid checks in the transaction commit path,
causing us to go emergency read only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a BUG_ON() can be hit in the wild, it shouldn't be a BUG_ON()
For reference, this has popped up once in the CI, and we'll need more
info to debug it:
03240 ------------[ cut here ]------------
03240 kernel BUG at lib/closure.c:21!
03240 kernel BUG at lib/closure.c:21!
03240 Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
03240 Modules linked in:
03240 CPU: 15 PID: 40534 Comm: kworker/u80:1 Not tainted 6.10.0-rc4-ktest-ga56da69799bd #25570
03240 Hardware name: linux,dummy-virt (DT)
03240 Workqueue: btree_update btree_interior_update_work
03240 pstate: 00001005 (nzcv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
03240 pc : closure_put+0x224/0x2a0
03240 lr : closure_put+0x24/0x2a0
03240 sp : ffff0000d12071c0
03240 x29: ffff0000d12071c0 x28: dfff800000000000 x27: ffff0000d1207360
03240 x26: 0000000000000040 x25: 0000000000000040 x24: 0000000000000040
03240 x23: ffff0000c1f20180 x22: 0000000000000000 x21: ffff0000c1f20168
03240 x20: 0000000040000000 x19: ffff0000c1f20140 x18: 0000000000000001
03240 x17: 0000000000003aa0 x16: 0000000000003ad0 x15: 1fffe0001c326974
03240 x14: 0000000000000a1e x13: 0000000000000000 x12: 1fffe000183e402d
03240 x11: ffff6000183e402d x10: dfff800000000000 x9 : ffff6000183e402e
03240 x8 : 0000000000000001 x7 : 00009fffe7c1bfd3 x6 : ffff0000c1f2016b
03240 x5 : ffff0000c1f20168 x4 : ffff6000183e402e x3 : ffff800081391954
03240 x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000a8000000
03240 Call trace:
03240 closure_put+0x224/0x2a0
03240 bch2_check_for_deadlock+0x910/0x1028
03240 bch2_six_check_for_deadlock+0x1c/0x30
03240 six_lock_slowpath.isra.0+0x29c/0xed0
03240 six_lock_ip_waiter+0xa8/0xf8
03240 __bch2_btree_node_lock_write+0x14c/0x298
03240 bch2_trans_lock_write+0x6d4/0xb10
03240 __bch2_trans_commit+0x135c/0x5520
03240 btree_interior_update_work+0x1248/0x1c10
03240 process_scheduled_works+0x53c/0xd90
03240 worker_thread+0x370/0x8c8
03240 kthread+0x258/0x2e8
03240 ret_from_fork+0x10/0x20
03240 Code: aa1303e0 d63f0020 a94363f7 17ffff8c (d4210000)
03240 ---[ end trace 0000000000000000 ]---
03240 Kernel panic - not syncing: Oops - BUG: Fatal exception
03240 SMP: stopping secondary CPUs
03241 SMP: failed to stop secondary CPUs 13,15
03241 Kernel Offset: disabled
03241 CPU features: 0x00,00000003,80000008,4240500b
03241 Memory Limit: none
03241 ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception ]---
03246 ========= FAILED TIMEOUT copygc_torture_no_checksum in 7200s
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Ignore optional ib_access_flags when an MR is created.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1717575368-14879-1-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
max_sge attribute is passed by the user, and is inserted and used
unchecked, so verify that the value doesn't exceed maximum allowed value
before using it.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/277ccc29e8d57bfd53ddeb2ac633f2760cf8cdd0.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix unwind flow as part of mlx5_ib_stage_init_init to use the correct
goto upon an error.
Fixes: 758ce14aee82 ("RDMA/mlx5: Implement MACsec gid addition and deletion")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/aa40615116eda14ec9eca21d52017d632ea89188.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
cachable and mmkey.rb_key together are used by mlx5_revoke_mr() to put the
MR/mkey back into the cache. In all cases they should be set correctly.
alloc_cacheable_mr() was setting cachable but not filling rb_key,
resulting in cache_ent_find_and_store() bucketing them all into a 0 length
entry.
implicit_get_child_mr()/mlx5_ib_alloc_implicit_mr() failed to set cachable
or rb_key at all, so the cache was not working at all for implicit ODP.
Cc: stable@vger.kernel.org
Fixes: 8c1185fef68c ("RDMA/mlx5: Change check for cacheable mkeys")
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7778c02dfa0999a30d6746c79a23dd7140a9c729.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When a cache ent already exists but doesn't have any mkeys in it the cache
will automatically create a new one based on the specification in the
ent->rb_key.
ent->ats was missed when creating the new key and so ma_translation_mode
was not being set even though the ent requires it.
Cc: stable@vger.kernel.org
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7c5613458ecb89fbe5606b7aa4c8d990bdea5b9a.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The below commit lifted the locking out of this function but left this
error path unlock behind resulting in unbalanced locking. Remove the
missed unlock too.
Cc: stable@vger.kernel.org
Fixes: 627122280c87 ("RDMA/mlx5: Add work to remove temporary entries from the cache")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/78090c210c750f47219b95248f9f782f34548bb1.1716900410.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
KVM fixes for 6.10
- Fix a "shift too big" goof in the KVM_SEV_INIT2 selftest.
- Compute the max mappable gfn for KVM selftests on x86 using GuestMaxPhyAddr
from KVM's supported CPUID (if it's available).
- Fix a race in kvm_vcpu_on_spin() by ensuring loads and stores are atomic.
- Fix technically benign bug in __kvm_handle_hva_range() where KVM consumes
the return from a void-returning function as if it were a boolean.
|
|
Add nop variants of i2c_find_device_by_fwnode(),
i2c_find_adapter_by_fwnode() and i2c_get_adapter_by_fwnode() for use
without CONFIG_I2C.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
With commit 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA
encryption"), older VMMs like QEMU 9.0 and older will fail when booting
SEV-ES guests with something like the following error:
qemu-system-x86_64: error: failed to get MSR 0x174
qemu-system-x86_64: ../qemu.git/target/i386/kvm/kvm.c:3950: kvm_get_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
This is because older VMMs that might still call
svm_get_msr()/svm_set_msr() for SEV-ES guests after guest boot even if
those interfaces were essentially just noops because of the vCPU state
being encrypted and stored separately in the VMSA. Now those VMMs will
get an -EINVAL and generally crash.
Newer VMMs that are aware of KVM_SEV_INIT2 however are already aware of
the stricter limitations of what vCPU state can be sync'd during
guest run-time, so newer QEMU for instance will work both for legacy
KVM_SEV_ES_INIT interface as well as KVM_SEV_INIT2.
So when using KVM_SEV_INIT2 it's okay to assume userspace can deal with
-EINVAL, whereas for legacy KVM_SEV_ES_INIT the kernel might be dealing
with either an older VMM and so it needs to assume that returning
-EINVAL might break the VMM.
Address this by only returning -EINVAL if the guest was started with
KVM_SEV_INIT2. Otherwise, just silently return.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Closes: https://lore.kernel.org/lkml/37usuu4yu4ok7be2hqexhmcyopluuiqj3k266z4gajc2rcj4yo@eujb23qc3zcm/
Fixes: 27bd5fdc24c0 ("KVM: SEV-ES: Prevent MSR access post VMSA encryption")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-ID: <20240604233510.764949-1-michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge ACPI device enumeration fixes for 6.10-rc5:
- Ignore MIPI camera graph port nodes created with the help of the
information from the ACPI tables on all Dell Tiger, Alder and Raptor
Lake models as that information is reported to be invalid on the
systems in question (Hans de Goede).
- Use new Intel CPU model matching macros in the MIPI DisCo for Imaging
part of ACPI device enumeration (Hans de Goede).
* acpi-scan:
ACPI: mipi-disco-img: Switch to new Intel CPU model defines
ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models
|
|
The recent fix introduced a reverse selection of
CONFIG_SERIAL_MULTI_INSTANTIATE, but its condition isn't always met.
Use a weak reverse selection to suggest the config for avoiding such
inconsistencies, instead.
Fixes: 9b1effff19cd ("ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406210732.ozgk8IMK-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406211244.oLhoF3My-lkp@intel.com/
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240621073915.19576-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Target register of mftc0 should be __res instead of $1, this is
a leftover from old .insn code.
Fixes: dd6d29a61489 ("MIPS: Implement microMIPS MT ASE helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Lenovo Yoga Pro 7 14AHP9 (PCI SSID 17aa:3891) seems requiring a similar workaround like Yoga 9 model and Yoga 7 Pro 14APH8 for the bass speaker.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20231207182035.30248-1-tiwai@suse.de/
Signed-off-by: Pablo Caño <pablocpascual@gmail.com>
Link: https://patch.msgid.link/20240620152533.76712-1-pablocpascual@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove an unneeded semicolon to avoid build warnings:
./arch/loongarch/kvm/exit.c:764:2-3: Unneeded semicolon
Cc: stable@vger.kernel.org
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9343
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the current code, if multiple hardware breakpoints/watchpoints in
a user-space thread, some of them will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
printf("start test\n");
a = 1;
printf("a = %d\n", a);
printf("end test\n");
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
...
The first hardware watchpoint is not triggered, the root causes are:
1. In hw_breakpoint_control(), The FWPnCFG1.2.4/MWPnCFG1.2.4 register
settings are not distinguished. They should be set based on hardware
watchpoint functions (fetch or load/store operations).
2. In breakpoint_handler() and watchpoint_handler(), it doesn't identify
which watchpoint is triggered. So, all watchpoint-related perf_event
callbacks are called and siginfo is sent to the user space. This will
cause user-space unable to determine which watchpoint is triggered.
The kernel need to identity which watchpoint is triggered via MWPS/
FWPS registers, and then call the corresponding perf event callbacks
to report siginfo to the user-space.
Modify the relevant code to solve above issues.
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) start
...
Temporary breakpoint 1, main () at test.c:5
5 printf("start test\n");
(gdb) watch a
Hardware watchpoint 2: a
(gdb) hbreak 8
Hardware assisted breakpoint 3 at 0x1200006ec: file test.c, line 8.
(gdb) c
Continuing.
start test
Hardware watchpoint 2: a
Old value = 0
New value = 1
main () at test.c:7
7 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
Breakpoint 3, main () at test.c:8
8 printf("end test\n");
(gdb) c
Continuing.
end test
[Inferior 1 (process 778) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the current code, gdb can set the watchpoint successfully through
ptrace interface, but watchpoint will not be triggered.
When debugging the following code using gdb.
lihui@bogon:~$ cat test.c
#include <stdio.h>
int a = 0;
int main()
{
a = 1;
printf("a = %d\n", a);
return 0;
}
lihui@bogon:~$ gcc -g test.c -o test
lihui@bogon:~$ gdb test
...
(gdb) watch a
...
(gdb) r
...
a = 1
[Inferior 1 (process 4650) exited normally]
No watchpoints were triggered, the root causes are:
1. Kernel uses perf_event and hw_breakpoint framework to control
watchpoint, but the perf_event corresponding to watchpoint is
not enabled. So it needs to be enabled according to MWPnCFG3
or FWPnCFG3 PLV bit field in ptrace_hbp_set_ctrl(), and privilege
is set according to the monitored addr in hw_breakpoint_control().
Furthermore, add a judgment in ptrace_hbp_set_addr() to ensure
kernel-space addr cannot be monitored in user mode.
2. The global enable control for all watchpoints is the WE bit of
CSR.CRMD, and hardware sets the value to 0 when an exception is
triggered. When the ERTN instruction is executed to return, the
hardware restores the value of the PWE field of CSR.PRMD here.
So, before a thread containing watchpoints be scheduled, the PWE
field of CSR.PRMD needs to be set to 1. Add this modification in
hw_breakpoint_control().
All changes according to the LoongArch Reference Manual:
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#basic-control-and-status-registers
With this patch:
lihui@bogon:~$ gdb test
...
(gdb) watch a
Hardware watchpoint 1: a
(gdb) r
...
Hardware watchpoint 1: a
Old value = 0
New value = 1
main () at test.c:6
6 printf("a = %d\n", a);
(gdb) c
Continuing.
a = 1
[Inferior 1 (process 775) exited normally]
Cc: stable@vger.kernel.org
Signed-off-by: Hui Li <lihui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
