| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.13, part #2
- Fix confusion with implicitly-shifted MDCR_EL2 masks breaking
SPE/TRBE initialization
- Align nested page table walker with the intended memory attribute
combining rules of the architecture
- Prevent userspace from constraining the advertised ASID width,
avoiding horrors of guest TLBIs not matching the intended context in
hardware
- Don't leak references on LPIs when insertion into the translation
cache fails
|
|
Signed-off-by: Stephen Gordon <gordoste@iinet.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241207122257.165096-1-gordoste@iinet.net.au
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With the current implementation, when ACP driver fails to read
ACPI _WOV entry then the DMI overrides code won't invoke,
may cause regressions for some BIOS versions.
Add a condition check to jump to check the DMI entries incase of
ACP driver fail to read ACPI _WOV method.
Fixes: 4095cf872084 (ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry)
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241210091026.996860-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Align all line continuations and (sub)section headers in a consistent
way.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Since commit 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in
text output section"), the exception table in arch/openrisc/kernel/head.S
is no longer positioned at the very beginning of the kernel image, which
causes a boot failure.
Currently, the exception table resides in the regular .text section.
Previously, it was placed at the head by relying on the linker receiving
arch/openrisc/kernel/head.o as the first object. However, this behavior
has changed because sections like .text.{asan,unknown,unlikely,hot} now
precede the regular .text section.
The .head.text section is intended for entry points requiring special
placement. However, in OpenRISC, this section has been misused: instead
of the entry points, it contains boot code meant to be discarded after
booting. This feature is typically handled by the .init.text section.
This commit addresses the issue by replacing the current __HEAD marker
with __INIT and re-annotating the entry points with __HEAD. Additionally,
it adds __REF to entry.S to suppress the following modpost warning:
WARNING: modpost: vmlinux: section mismatch in reference: _tng_kernel_start+0x70 (section: .text) -> _start (section: .init.text)
Fixes: 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in text output section")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/5e032233-5b65-4ad5-ac50-d2eb6c00171c@roeck-us.net/#t
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rong Xu <xur@google.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Using WARN() for showing the error of symlink creations don't give
more information than telling that something goes wrong, since the
usual code path is a lregister callback from each control element
creation. More badly, the use of WARN() rather confuses fuzzer as if
it were serious issues.
This patch downgrades the warning messages to use the normal dev_err()
instead of WARN(). For making it clearer, add the function name to
the prefix, too.
Fixes: a135dfb5de15 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Reported-by: syzbot+4e7919b09c67ffd198ae@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/675664c7.050a0220.a30f1.018c.GAE@google.com
Link: https://patch.msgid.link/20241209095614.4273-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
DEFAULT_SYMBOL_NAMESPACE must already be defined when <linux/export.h>
is included. So move the define above the include block.
Fixes: b9b1fc1ae119 ("gpio: idio-16: Introduce the ACCES IDIO-16 GPIO library module")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: William Breathitt Gray <wbg@kernel.org>
Link: https://lore.kernel.org/r/20241203172631.1647792-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Linux 6.13-rc2
|
|
Koichiro Den says:
====================
virtio_net: correct netdev_tx_reset_queue() invocation points
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
scenarios for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
This patch series resolves the issue and also addresses similar existing
problems:
(a). Drop netdev_tx_reset_queue() from open/close path. This eliminates the
BQL crashes due to the problematic open/close path.
(b). As a result of (a), netdev_tx_reset_queue() is now explicitly required
in freeze/restore path. Add netdev_tx_reset_queue() immediately after
free_unused_bufs() invocation.
(c). Fix missing resetting in virtnet_tx_resize().
virtnet_tx_resize() has lacked proper resetting since commit
c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits").
(d). Fix missing resetting in the XDP_SETUP_XSK_POOL path.
Similar to (c), this path lacked proper resetting. Call
netdev_tx_reset_queue() when virtqueue_reset() has actually recycled
unused buffers.
This patch series consists of six commits:
[1/6]: Resolves (a) and (b). # also -stable 6.11.y
[2/6]: Minor fix to make [4/6] streamlined.
[3/6]: Prerequisite for (c). # also -stable 6.11.y
[4/6]: Resolves (c) (incl. Prerequisite for (d)) # also -stable 6.11.y
[5/6]: Preresuisite for (d).
[6/6]: Resolves (d).
Changes for v4:
- move netdev_tx_reset_queue() out of free_unused_bufs()
- submit to net, not net-next
Changes for v3:
- replace 'flushed' argument with 'recycle_done'
Changes for v2:
- add tx queue resetting for (b) to (d) above
v3: https://lore.kernel.org/all/20241204050724.307544-1-koichiro.den@canonical.com/
v2: https://lore.kernel.org/all/20241203073025.67065-1-koichiro.den@canonical.com/
v1: https://lore.kernel.org/all/20241130181744.3772632-1-koichiro.den@canonical.com/
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicast+0x23e/0x390
? netlink_sendmsg+0x21e/0x490
? ____sys_sendmsg+0x31b/0x350
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? __nla_validate_parse+0x5f/0xee0
? __pfx___probestub_irq_enable+0x3/0x10
? __create_object+0x5e/0x90
? security_capable+0x3b/0x7[I0
rtnl_newlink+0x784/0xaf0
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? stack_depot_save_flags+0x24/0x6d0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x34f/0x3f0
? do_syscall_64+0x6c/0x180
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x23e/0x390
netlink_sendmsg+0x21e/0x490
____sys_sendmsg+0x31b/0x350
? copy_msghdr_from_user+0x6d/0xa0
___sys_sendmsg+0x86/0xd0
? __pte_offset_map+0x17/0x160
? preempt_count_add+0x69/0xa0
? __call_rcu_common.constprop.0+0x147/0x610
? preempt_count_add+0x69/0xa0
? preempt_count_add+0x69/0xa0
? _raw_spin_trylock+0x13/0x60
? trace_hardirqs_on+0x1d/0x80
__sys_sendmsg+0x66/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f41defe5b34
Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00
f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55
RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34
RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003
RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001
R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003
R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000
</TASK>
[...]
====================
Link: https://patch.msgid.link/20241206011047.923923-1-koichiro.den@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
virtnet_sq_bind_xsk_pool() flushes tx skbs and then resets tx queue, so
DQL counters need to be reset when flushing has actually occurred, Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_resize()
to handle this.
Fixes: 21a4e3ce6dc7 ("virtio_net: xsk: bind/unbind xsk for tx")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_reset() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when it really occurs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
virtnet_tx_resize() flushes remaining tx skbs, requiring DQL counters to
be reset when flushing has actually occurred. Add
virtnet_sq_free_unused_buf_done() as a callback for virtqueue_reset() to
handle this.
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtqueue_resize() has actually recycled all unused buffers,
additional work may be required in some cases. Relying solely on its
return status is fragile, so introduce a new function argument
'recycle_done', which is invoked when the recycle really occurs.
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While not harmful, using vq2rxq where it's always sq appears odd.
Replace it with the more appropriate vq2txq for clarity and correctness.
Fixes: 89f86675cb03 ("virtio_net: xsk: tx: support xmit xsk buffer")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
cases for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
netdev_tx_reset_queue() can actually be dropped from virtnet_open path;
the device is not stopped in any case. For BQL core part, it's just like
traffic nearly ceases to exist for some period. For stall detector added
to BQL, even if virtnet_close could somehow lead to some TX completions
delayed for long, followed by virtnet_open, we can just take it as stall
as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector
based on BQL"). Note also that users can still reset stall_max via sysfs.
So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This
eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now
explicitly required in freeze/restore path. This patch adds it to
immediately after free_unused_bufs(), following the rule of thumb:
netdev_tx_reset_queue() should follow any SKB freeing not followed by
netdev_tx_completed_queue(). This seems the most consistent and
streamlined approach, and now netdev_tx_reset_queue() runs whenever
free_unused_bufs() is done.
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicast+0x23e/0x390
? netlink_sendmsg+0x21e/0x490
? ____sys_sendmsg+0x31b/0x350
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? __nla_validate_parse+0x5f/0xee0
? __pfx___probestub_irq_enable+0x3/0x10
? __create_object+0x5e/0x90
? security_capable+0x3b/0x70
rtnl_newlink+0x784/0xaf0
? avc_has_perm_noaudit+0x67/0xf0
? cred_has_capability.isra.0+0x75/0x110
? stack_depot_save_flags+0x24/0x6d0
? __pfx_rtnl_newlink+0x10/0x10
rtnetlink_rcv_msg+0x34f/0x3f0
? do_syscall_64+0x6c/0x180
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
netlink_unicast+0x23e/0x390
netlink_sendmsg+0x21e/0x490
____sys_sendmsg+0x31b/0x350
? copy_msghdr_from_user+0x6d/0xa0
___sys_sendmsg+0x86/0xd0
? __pte_offset_map+0x17/0x160
? preempt_count_add+0x69/0xa0
? __call_rcu_common.constprop.0+0x147/0x610
? preempt_count_add+0x69/0xa0
? preempt_count_add+0x69/0xa0
? _raw_spin_trylock+0x13/0x60
? trace_hardirqs_on+0x1d/0x80
__sys_sendmsg+0x66/0xc0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f41defe5b34
Code: 15 e1 12 0f 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00
f3 0f 1e fa 80 3d 35 95 0f 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55
RSP: 002b:00007ffe5336ecc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f41defe5b34
RDX: 0000000000000000 RSI: 00007ffe5336ed30 RDI: 0000000000000003
RBP: 00007ffe5336eda0 R08: 0000000000000010 R09: 0000000000000001
R10: 00007ffe5336f6f9 R11: 0000000000000202 R12: 0000000000000003
R13: 0000000067452259 R14: 0000556ccc28b040 R15: 0000000000000000
</TASK>
[...]
Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits")
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
[ pabeni: trimmed possibly troublesome separator ]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Interrupt status (GPI_IS) register is cleared by writing 1 to it, not 0.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-8-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
GPIO line can only be used as interrupt if its INTSEL register is
programmed by the BIOS.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-7-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add check of HOSTSW_MODE bit to determine if GPIO pad can be used by the
driver.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-6-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Correct RX Level/Edge Configuration register (RXEVCFG) bitmask.
Cc: stable@vger.kernel.org
Signed-off-by: Shankar Bandal <shankar.bandal@intel.com>
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-5-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Update GPI Interrupt Status register offset to correct value.
Cc: stable@vger.kernel.org
Signed-off-by: Shankar Bandal <shankar.bandal@intel.com>
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-4-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Base Address of vGPIO MMIO register is provided directly by the BIOS
instead of using offsets. Update address assignment to reflect this
change in driver.
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-3-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Move setting irq_chip.name from probe() function to the initialization
of "irq_chip" struct in order to fix vGPIO driver crash during bootup.
Crash was caused by unauthorized modification of irq_chip.name field
where irq_chip struct was initialized as const.
This behavior is a consequence of suboptimal implementation of
gpio_irq_chip_set_chip(), which should be changed to avoid
casting away const qualifier.
Crash log:
BUG: unable to handle page fault for address: ffffffffc0ba81c0
/#PF: supervisor write access in kernel mode
/#PF: error_code(0x0003) - permissions violation
CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1
Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024
RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids]
Cc: stable@vger.kernel.org
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241204070415.1034449-2-mika.westerberg@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add an assertion to all the iteration points that don't obviously
have the lock held already. These all take the locker higher in their
call chains.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/2-v1-3b9edcf8067d+3975-amd_dev_list_locking_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The list domain->dev_list is protected by the domain->lock spinlock.
Any iteration, addition or removal must be under the lock.
Move the list_del() up into the critical section. pdom_is_sva_capable(),
and destroy_gcr3_table() do not interact with the list element.
Wrap the list_add() in a lock, it would make more sense if this was under
the same critical section as adjusting the refcounts earlier, but that
requires more complications.
Fixes: d6b47dec3684 ("iommu/amd: Reduce domain lock scope in attach device path")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/1-v1-3b9edcf8067d+3975-amd_dev_list_locking_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Due to target variable is being reassigned in npc_install_flow()
function, PF multicast rules are not getting installed.
This patch addresses the issue by fixing the "IF" condition
checks when rules are installed by AF.
Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241205113435.10601-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Large kmalloc directly allocates from the page allocator and then use
lruvec_stat_mod_folio() to increment the unreclaimable slab stats for
global and memcg. However when post memcg charging of slab objects was
added in commit 9028cdeb38e1 ("memcg: add charging of already allocated
slab objects"), it missed to correctly handle the unreclaimable slab
stats for memcg.
One user visisble effect of that bug is that the node level
unreclaimable slab stat will work correctly but the memcg level stat can
underflow as kernel correctly handles the free path but the charge path
missed to increment the memcg level unreclaimable slab stat. Let's fix
by correctly handle in the post charge code path.
Fixes: 9028cdeb38e1 ("memcg: add charging of already allocated slab objects")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Offset based on (id * size) is wrong for sqc and cqc.
(*sqc/*cqc + 1) can already offset sizeof(struct(Xqc)) length.
Fixes: 15f112f9cef5 ("crypto: hisilicon/debugfs - mask the unnecessary info from the dump")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As virtual addresses in general may not be suitable for DMA, always
perform a copy before using them in an SG list.
Fixes: 1e562deacecc ("crypto: rsassa-pkcs1 - Migrate to sig_alg backend")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
lrbp->compl_time_stamp_local_clock is set to zero after sending a sqe
but it is not updated after completing a cqe. Thus the printed
information in ufshcd_print_tr() will always be zero.
Update lrbp->cmpl_time_stamp_local_clock after completing a cqe.
Log sample:
ufshcd-qcom 1d84000.ufshc: UPIU[8] - issue time 8750227249 us
ufshcd-qcom 1d84000.ufshc: UPIU[8] - complete time 0 us
Fixes: c30d8d010b5e ("scsi: ufs: core: Prepare for completion in MCQ")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: liuderong <liuderong@oppo.com>
Link: https://lore.kernel.org/r/1733470182-220841-1-git-send-email-liuderong@oppo.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Stefan Wahren says:
====================
qca_spi: Fix SPI specific issues
This small series address two annoying SPI specific issues of
the qca_spi driver.
====================
Link: https://patch.msgid.link/20241206184643.123399-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The module parameter qcaspi_pluggable controls if QCA7000 signature
should be checked at driver probe (current default) or not. Unfortunately
this could fail in case the chip is temporary in reset, which isn't under
total control by the Linux host. So disable this check per default
in order to avoid unexpected probe failures.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Storing the maximum clock speed in module parameter qcaspi_clkspeed
has the unintended side effect that the first probed instance
defines the value for all other instances. Fix this issue by storing
it in max_speed_hz of the relevant SPI device.
This fix keeps the priority of the speed parameter (module parameter,
device tree property, driver default). Btw this uses the opportunity
to get the rid of the unused member clkspeed.
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241206184643.123399-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t4_set_vf_mac_acl() uses pf to set mac addr, but t4vf_get_vf_mac_acl()
uses port number to get mac addr, this leads to error when an attempt
to set MAC address on VF's of PF2 and PF3.
This patch fixes the issue by using port number to set mac address.
Fixes: e0cdac65ba26 ("cxgb4vf: configure ports accessible by the VF")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241206062014.49414-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each `bindgen` release may upgrade the list of Rust targets. For instance,
currently, in their master branch [1], the latest ones are:
Nightly => {
vectorcall_abi: #124485,
ptr_metadata: #81513,
layout_for_ptr: #69835,
},
Stable_1_77(77) => { offset_of: #106655 },
Stable_1_73(73) => { thiscall_abi: #42202 },
Stable_1_71(71) => { c_unwind_abi: #106075 },
Stable_1_68(68) => { abi_efiapi: #105795 },
By default, the highest stable release in their list is used, and users
are expected to set one if they need to support older Rust versions
(e.g. see [2]).
Thus, over time, new Rust features are used by default, and at some
point, it is likely that `bindgen` will emit Rust code that requires a
Rust version higher than our minimum (or perhaps enabling an unstable
feature). Currently, there is no problem because the maximum they have,
as seen above, is Rust 1.77.0, and our current minimum is Rust 1.78.0.
Therefore, set a Rust target explicitly now to prevent going forward in
time too much and thus getting potential build failures at some point.
Since we also support a minimum `bindgen` version, and since `bindgen`
does not support passing unknown Rust target versions, we need to use
the list of our minimum `bindgen` version, rather than the latest. So,
since `bindgen` 0.65.1 had this list [3], we need to use Rust 1.68.0:
/// Rust stable 1.64
/// * `core_ffi_c` ([Tracking issue](https://github.com/rust-lang/rust/issues/94501))
=> Stable_1_64 => 1.64;
/// Rust stable 1.68
/// * `abi_efiapi` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/65815))
=> Stable_1_68 => 1.68;
/// Nightly rust
/// * `thiscall` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/42202))
/// * `vectorcall` calling convention (no tracking issue)
/// * `c_unwind` calling convention ([Tracking issue](https://github.com/rust-lang/rust/issues/74990))
=> Nightly => nightly;
...
/// Latest stable release of Rust
pub const LATEST_STABLE_RUST: RustTarget = RustTarget::Stable_1_68;
Thus add the `--rust-target 1.68` parameter. Add a comment as well
explaining this.
An alternative would be to use the currently running (i.e. actual) `rustc`
and `bindgen` versions to pick a "better" Rust target version. However,
that would introduce more moving parts depending on the user setup and
is also more complex to implement.
Starting with `bindgen` 0.71.0 [4], we will be able to set any future
Rust version instead, i.e. we will be able to set here our minimum
supported Rust version. Christian implemented it [5] after seeing this
patch. Thanks!
Cc: Christian Poveda <git@pvdrz.com>
Cc: Emilio Cobos Álvarez <emilio@crisal.io>
Cc: stable@vger.kernel.org # needed for 6.12.y; unneeded for 6.6.y; do not apply to 6.1.y
Fixes: c844fa64a2d4 ("rust: start supporting several `bindgen` versions")
Link: https://github.com/rust-lang/rust-bindgen/blob/21c60f473f4e824d4aa9b2b508056320d474b110/bindgen/features.rs#L97-L105 [1]
Link: https://github.com/rust-lang/rust-bindgen/issues/2960 [2]
Link: https://github.com/rust-lang/rust-bindgen/blob/7d243056d335fdc4537f7bca73c06d01aae24ddc/bindgen/features.rs#L131-L150 [3]
Link: https://github.com/rust-lang/rust-bindgen/blob/main/CHANGELOG.md#0710-2024-12-06 [4]
Link: https://github.com/rust-lang/rust-bindgen/pull/2993 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180323.255997-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
During boot some of the calls to tegra241_cmdqv_get_cmdq() will happen
in preemptible context. As this function calls smp_processor_id(), if
CONFIG_DEBUG_PREEMPT is enabled, these calls will trigger a series of
"BUG: using smp_processor_id() in preemptible" backtraces.
As tegra241_cmdqv_get_cmdq() only calls smp_processor_id() to use the
CPU number as a factor to balance out traffic on cmdq usage, it is safe
to use raw_smp_processor_id() here.
Cc: <stable@vger.kernel.org>
Fixes: 918eb5c856f6 ("iommu/arm-smmu-v3: Add in-kernel support for NVIDIA Tegra241 (Grace) CMDQV")
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/Z1L1mja3nXzsJ0Pk@uudg.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Clippy in the upcoming Rust 1.83.0 spots a spurious empty line since the
`clippy::empty_line_after_doc_comments` warning is now enabled by default
given it is part of the `suspicious` group [1]:
error: empty line after doc comment
--> drivers/gpu/drm/drm_panic_qr.rs:931:1
|
931 | / /// They must remain valid for the duration of the function call.
932 | |
| |_
933 | #[no_mangle]
934 | / pub unsafe extern "C" fn drm_panic_qr_generate(
935 | | url: *const i8,
936 | | data: *mut u8,
937 | | data_len: usize,
... |
940 | | tmp_size: usize,
941 | | ) -> u8 {
| |_______- the comment documents this function
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#empty_line_after_doc_comments
= note: `-D clippy::empty-line-after-doc-comments` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::empty_line_after_doc_comments)]`
= help: if the empty line is unintentional remove it
Thus remove the empty line.
Cc: stable@vger.kernel.org
Fixes: cb5164ac43d0 ("drm/panic: Add a QR code panic screen")
Link: https://github.com/rust-lang/rust-clippy/pull/13091 [1]
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20241125233332.697497-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The temp directory is made and a known fake hwmon PMU created within
it. Prior to this fix the events were being incorrectly written to the
temp directory rather than the fake PMU directory. This didn't impact
the test as the directory fd matched the wrong location, but it
doesn't mirror what a hwmon PMU would actually look like.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The hwmon PMU test will make a temp directory, open the directory with
O_DIRECTORY then fill it with contents. As the open is before the
filling the contents the later fdopendir may reflect the initial empty
state, meaning no events are seen. Change to re-open the directory,
rather than dup the fd, so the latest contents are seen.
Minor tweaks/additions to debug messages.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20241206042306.1055913-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The comparison function cmp_profile_data() violates the C standard's
requirements for qsort() comparison functions, which mandate symmetry
and transitivity:
* Symmetry: If x < y, then y > x.
* Transitivity: If x < y and y < z, then x < z.
When v1 and v2 are equal, the function incorrectly returns 1, breaking
symmetry and transitivity. This causes undefined behavior, which can
lead to memory corruption in certain versions of glibc [1].
Fix the issue by returning 0 when v1 and v2 are equal, ensuring
compliance with the C standard and preventing undefined behavior.
Link: https://www.qualys.com/2024/01/30/qsort.txt [1]
Fixes: 0f223813edd0 ("perf ftrace: Add 'profile' command")
Fixes: 74ae366c37b7 ("perf ftrace profile: Add -s/--sort option")
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: jserv@ccns.ncku.edu.tw
Cc: chuang@cs.nycu.edu.tw
Link: https://lore.kernel.org/r/20241209134226.1939163-1-visitorckw@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
utf8s_to_utf16s() specifies pwcs as a wchar_t pointer (whether big endian
or little endian is passed in as an additional parm), so to remove a
distracting compile warning it needs to be cast as (wchar_t *) in
parse_reparse_wsl_symlink() as done by other callers.
Fixes: 06a7adf318a3 ("cifs: Add support for parsing WSL-style symlinks")
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In acpi_decode_space() addr->info.mem.caching is checked on main level
for any resource type but addr->info.mem is part of union and thus
valid only if the resource type is memory range.
Move the check inside the preceeding switch/case to only execute it
when the union is of correct type.
Fixes: fcb29bbcd540 ("ACPI: Add prefetch decoding to the address space parser")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20241202100614.20731-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Remove if_not_guard() as it is generating incorrect code
- Fix the initialization of the fake lockdep_map for the first locked
ww_mutex
* tag 'locking_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
headers/cleanup.h: Remove the if_not_guard() facility
locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is drained before reconfiguring the
hardware
- Add Arrow Lake U support
* tag 'perf_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Unconditionally drain PEBS DS when changing PEBS_DATA_CFG
perf/x86/intel: Add Arrow Lake U support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove wrong enqueueing of a task for a later wakeup when a task
blocks on a RT mutex
- Do not setup a new deadline entity on a boosted task as that has
happened already
- Update preempt= kernel command line param
- Prevent needless softirqd wakeups in the idle task's context
- Detect the case where the idle load balancer CPU becomes busy and
avoid unnecessary load balancing invocation
- Remove an unnecessary load balancing need_resched() call in
nohz_csd_func()
- Allow for raising of SCHED_SOFTIRQ softirq type on RT but retain the
warning to catch any other cases
- Remove a wrong warning when a cpuset update makes the task affinity
no longer a subset of the cpuset
* tag 'sched_urgent_for_v6.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: rtmutex: Fix wake_q logic in task_blocks_on_rt_mutex
sched/deadline: Fix warning in migrate_enable for boosted tasks
sched/core: Update kernel boot parameters for LAZY preempt.
sched/core: Prevent wakeup of ksoftirqd during idle load balance
sched/fair: Check idle_cpu() before need_resched() to detect ilb CPU turning busy
sched/core: Remove the unnecessary need_resched() check in nohz_csd_func()
softirq: Allow raising SCHED_SOFTIRQ from SMP-call-function on RT kernel
sched: fix warning in sched_setaffinity
sched/deadline: Fix replenish_dl_new_period dl_server condition
|
|
Build 6.13-rc12 for x86_64 with gcc 14.2.1 fails with the error:
ld: vmlinux.o: in function `virtual_mapped':
linux/arch/x86/kernel/relocate_kernel_64.S:249:(.text+0x5915b): undefined reference to `saved_context_gdt_desc'
when CONFIG_KEXEC_JUMP is enabled.
This was introduced by commit 07fa619f2a40 ("x86/kexec: Restore GDT on
return from ::preserve_context kexec") which introduced a use of
saved_context_gdt_desc without a declaration for it.
Fix that by including asm/asm-offsets.h where saved_context_gdt_desc
is defined (indirectly in include/generated/asm-offsets.h which
asm/asm-offsets.h includes).
Fixes: 07fa619f2a40 ("x86/kexec: Restore GDT on return from ::preserve_context kexec")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Closes: https://lore.kernel.org/oe-kbuild-all/202411270006.ZyyzpYf8-lkp@intel.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The powerpc user access code is special, and unlike other architectures
distinguishes between user access for reading and writing.
And commit 43a43faf5376 ("futex: improve user space accesses") messed
that up. It went undetected elsewhere, but caused ppc32 to fail early
during boot, because the user access had been started with
user_read_access_begin(), but then finished off with just a plain
"user_access_end()".
Note that the address-masking user access helpers don't even have that
read-vs-write distinction, so if powerpc ever wants to do address
masking tricks, we'll have to do some extra work for it.
[ Make sure to also do it for the EFAULT case, as pointed out by
Christophe Leroy ]
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/87bjxl6b0i.fsf@igel.home/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Daniel Machon says:
====================
net: sparx5: misc fixes for sparx5 and lan969x
This series fixes various issues in the Sparx5 and lan969x drivers. Most
of the fixes are for new issues introduced by the recent series adding
lan969x switch support in the Sparx5 driver.
Most notable is patch 1/5 that moves the lan969x dir into the sparx5
dir, in order to address a cyclic dependency issue reported by depmod,
when installing modules. Details are in the commit descriptions.
To: Andrew Lunn <andrew+netdev@lunn.ch>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Lars Povlsen <lars.povlsen@microchip.com>
To: Steen Hegelund <Steen.Hegelund@microchip.com>
To: UNGLinuxDriver@microchip.com
To: Richard Cochran <richardcochran@gmail.com>
To: Bjarni Jonasson <bjarni.jonasson@microchip.com>
To: jensemil.schulzostergaard@microchip.com
To: horatiu.vultur@microchip.com
To: arnd@arndb.de
To: jacob.e.keller@intel.com
To: Parthiban.Veerasooran@microchip.com
Cc: Calvin Owens <calvin@wbinvd.org>
Cc: Muhammad Usama Anjum <Usama.Anjum@collabora.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
====================
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On port initialization, we configure the maximum frame length accepted
by the receive module associated with the port. This value is currently
written to the MAX_LEN field of the DEV10G_MAC_ENA_CFG register, when in
fact, it should be written to the DEV10G_MAC_MAXLEN_CFG register. Fix
this.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing port mirroring, the physical port to send the frame to, is
written to the FRMC_PORT_VAL field of the QFWD_FRAME_COPY_CFG register.
This field is 7 bits wide on sparx5 and 6 bits wide on lan969x, and has
a default value of 65 and 30, respectively (the number of front ports).
On mirror deletion, we set the default value of the monitor port to
65 for this field, in case no more ports exists for the mirror. Needless
to say, this will not fit the 6 bits on lan969x.
Fix this by correctly using the n_ports constant instead.
Fixes: 3f9e46347a46 ("net: sparx5: use SPX5_CONST for constants which already have a symbol")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The FDMA handler is responsible for scheduling a NAPI poll, which will
eventually fetch RX packets from the FDMA queue. Currently, the FDMA
handler is run in a threaded context. For some reason, this kills
performance. Admittedly, I did not do a thorough investigation to see
exactly what causes the issue, however, I noticed that in the other
driver utilizing the same FDMA engine, we run the FDMA handler in hard
IRQ context.
Fix this performance issue, by running the FDMA handler in hard IRQ
context, not deferring any work to a thread.
Prior to this change, the RX UDP performance was:
Interval Transfer Bitrate Jitter
0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms
After this change, the rx UDP performance is:
Interval Transfer Bitrate Jitter
0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms
Fixes: 10615907e9b5 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
