| Age | Commit message (Collapse) | Author |
|---|
|
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.4
A collection of fixes for v6.4, mostly driver specific but there's also
one fix for DPCM to avoid incorrectly repeated calls to prepare() which
can trigger issues on some systems.
|
|
Jiri Pirko says:
====================
devlink: small port_new/del() cleanup
This patchset cleans up couple of leftovers after recent devlink locking
changes. Previously, both port_new/dev() commands were called without
holding instance lock. Currently all devlink commands are called with
instance lock held.
The first patch just removes redundant port notification.
The second one removes couple of outdated comments.
The last patch changes port_dev() to have devlink_port pointer as an arg
instead of port_index, which makes it similar to the rest of port
related ops.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Historically there was a reason why port_dev() along with for example
port_split() did get port_index instead of the devlink_port pointer.
With the locking changes that were done which ensured devlink instance
mutex is hold for every command, the port ops could get devlink_port
pointer directly. Change the forgotten port_dev() op to be as others
and pass devlink_port pointer instead of port_index.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All commands are called holding instance lock. Remove the outdated
comment that says otherwise.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The notification about created port is send from devl_port_register()
function called from ops->port_new(). No need to send it again here,
so remove the call and the helper function.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Donald Hunter says:
====================
tools: ynl: Add byte-order support for struct members
This patchset adds support to ynl for handling byte-order in struct
members. The first patch is a refactor to use predefined Struct() objects
instead of generating byte-order specific formats on the fly. The second
patch adds byte-order handling for struct members.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for byte-order in struct members in the genetlink-legacy
spec.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a dict of predefined Struct() objects to decode scalar types in native,
big or little endian format. This removes the repetitive code for the
scalar variants and ensures all the signed variants are supported.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
optlen is fetched without checking whether there is more than one byte to parse.
It can lead to out-of-bounds access.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: c61a40432509 ("[IPV6]: Find option offset by type.")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2023-05-22
This series provides bug fixes for the mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When taking a network interface down (or removing a SFP module) after
the PHY has encountered an error, phy_stop() complains incorrectly
that it was called from HALTED state.
The reason this is incorrect is that the network driver will have
called phy_start() when the interface was brought up, and the fact
that the PHY has a problem bears no relationship to the administrative
state of the interface. Taking the interface administratively down
(which calls phy_stop()) is always the right thing to do after a
successful phy_start() call, whether or not the PHY has encountered
an error.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Guillaume Nault says:
====================
ipv4: Remove RTO_ONLINK from udp, ping and raw sockets.
udp_sendmsg(), ping_v4_sendmsg() and raw_sendmsg() use similar patterns
for restricting their route lookup to on-link hosts. Although they use
slightly different code, they all use RTO_ONLINK to override the least
significant bit of their tos value.
RTO_ONLINK is used to restrict the route scope even when the scope is
set to RT_SCOPE_UNIVERSE. Therefore it isn't necessary: we can properly
set the scope to RT_SCOPE_LINK instead.
Removing RTO_ONLINK will allow to convert .flowi4_tos to dscp_t in the
future, thus allowing to properly separate the DSCP from the ECN bits
in the networking stack.
This patch series defines a common helper to figure out what's the
scope of the route lookup. This unifies the way udp, ping and raw
sockets get their routing scope and removes their dependency on
RTO_ONLINK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use ip_sendmsg_scope() to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag. The objective is to eventually remove RTO_ONLINK, which will
allow converting .flowi4_tos to dscp_t.
Now that the scope is determined by ip_sendmsg_scope(), we need to
check its result to set the 'connected' variable.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use ip_sendmsg_scope() to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag. The objective is to eventually remove RTO_ONLINK, which will
allow converting .flowi4_tos to dscp_t.
The MSG_DONTROUTE and SOCK_LOCALROUTE cases were already handled by
raw_sendmsg() (SOCK_LOCALROUTE was handled by the RT_CONN_FLAGS*()
macros called by get_rtconn_flags()). However, opt.is_strictroute
wasn't taken into account. Therefore, a side effect of this patch is to
now honour opt.is_strictroute, and thus align raw_sendmsg() with
ping_v4_sendmsg() and udp_sendmsg().
Since raw_sendmsg() was the only user of get_rtconn_flags(), we can now
remove this function.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define a new helper to figure out the correct route scope to use on TX,
depending on socket configuration, ancillary data and send flags.
Use this new helper to properly initialise the scope in
flowi4_init_output(), instead of overriding tos with the RTO_ONLINK
flag.
The objective is to eventually remove RTO_ONLINK, which will allow
converting .flowi4_tos to dscp_t.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx
offload, only use DSA untagging") makes VLAN RX offloading to be only used
on the SoCs without the MTK_NETSYS_V2 ability (which are not just MT7621
and MT7622). The commit disables the proper handling of special tagged
(DSA) frames, added with commit 87e3df4961f4 ("net-next: ethernet:
mediatek: add CDM able to recognize the tag for DSA"), for non
MTK_NETSYS_V2 SoCs when it finds a MAC that does not use DSA. So if the
other MAC uses DSA, the CDMQ component transmits DSA tagged frames to the
CPU improperly. This issue can be observed on frames with TCP, for example,
a TCP speed test using iperf3 won't work.
The commit disables the proper handling of special tagged (DSA) frames
because it assumes that these SoCs don't use more than one MAC, which is
wrong. Although I made Frank address this false assumption on the patch log
when they sent the patch on behalf of Felix, the code still made changes
with this assumption.
Therefore, the proper handling of special tagged (DSA) frames must be kept
enabled in all circumstances as it doesn't affect non DSA tagged frames.
Hardware DSA untagging, introduced with the commit 2d7605a72906 ("net:
ethernet: mtk_eth_soc: enable hardware DSA untagging"), and VLAN RX
offloading are operations on the two CDM components of the frame engine,
CDMP and CDMQ, which connect to Packet DMA (PDMA) and QoS DMA (QDMA) and
are between the MACs and the CPU. These operations apply to all MACs of the
SoC so if one MAC uses DSA and the other doesn't, the hardware DSA
untagging operation will cause the CDMP component to transmit non DSA
tagged frames to the CPU improperly.
Since the VLAN RX offloading feature configuration was dropped, VLAN RX
offloading can only be used along with hardware DSA untagging. So, for the
case above, we need to disable both features and leave it to the CPU,
therefore software, to untag the DSA and VLAN tags.
So the correct way to handle this is:
For all SoCs:
Enable the proper handling of special tagged (DSA) frames
(MTK_CDMQ_IG_CTRL).
For non MTK_NETSYS_V2 SoCs:
Enable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Enable VLAN RX offloading (MTK_CDMP_EG_CTRL).
When a non MTK_NETSYS_V2 SoC MAC does not use DSA:
Disable hardware DSA untagging (MTK_CDMP_IG_CTRL).
Disable VLAN RX offloading (MTK_CDMP_EG_CTRL).
Fixes: c6d96df9fa2c ("net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untagging")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We had a good run, but after 4 weeks of use we heard someone
asking about pw-bot commands. Let's explain its existence
in the docs. It's not a complete documentation but hopefully
it's enough for the casual contributor. The project and scope
are in flux so the details would likely become out of date,
if we were to document more in depth.
Link: https://lore.kernel.org/all/20230522140057.GB18381@nucnuc.mle/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522230903.1853151-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for using IPv6 Big TCP on DQ which can handle large TSO/GRO
packets. See https://lwn.net/Articles/895398/. This can improve the
throughput and CPU usage.
Perf test result:
ip -d link show $DEV
gso_max_size 185000 gso_max_segs 65535 tso_max_size 262143 tso_max_segs 65535 gro_max_size 185000
For performance, tested with neper using 9k MTU on hardware that supports 200Gb/s line rate.
In single streams when line rate is not saturated, we expect throughput improvements.
When the networking is performing at line rate, we expect cpu usage improvements.
Tcp_stream (unidirectional stream test, T=thread, F=flow):
skb=180kb, T=1, F=1, no zerocopy: throughput average=64576.88 Mb/s, sender stime=8.3, receiver stime=10.68
skb=64kb, T=1, F=1, no zerocopy: throughput average=64862.54 Mb/s, sender stime=9.96, receiver stime=12.67
skb=180kb, T=1, F=1, yes zerocopy: throughput average=146604.97 Mb/s, sender stime=10.61, receiver stime=5.52
skb=64kb, T=1, F=1, yes zerocopy: throughput average=131357.78 Mb/s, sender stime=12.11, receiver stime=12.25
skb=180kb, T=20, F=100, no zerocopy: throughput average=182411.37 Mb/s, sender stime=41.62, receiver stime=79.4
skb=64kb, T=20, F=100, no zerocopy: throughput average=182892.02 Mb/s, sender stime=57.39, receiver stime=72.69
skb=180kb, T=20, F=100, yes zerocopy: throughput average=182337.65 Mb/s, sender stime=27.94, receiver stime=39.7
skb=64kb, T=20, F=100, yes zerocopy: throughput average=182144.20 Mb/s, sender stime=47.06, receiver stime=39.01
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230522201552.3585421-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with
TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with
zerocopy skbs. But it ended up adding a leak of its own. When
skb_orphan_frags_rx() fails, the function just returns, leaking the skb
it just cloned. Free it before returning.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Fixes: 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.")
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230522153020.32422-1-ptyadav@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Howells says:
====================
splice, net: Replace sendpage with sendmsg(MSG_SPLICE_PAGES), part 1
Here's the first tranche of patches towards providing a MSG_SPLICE_PAGES
internal sendmsg flag that is intended to replace the ->sendpage() op with
calls to sendmsg(). MSG_SPLICE_PAGES is a hint that tells the protocol
that it should splice the pages supplied if it can and copy them if not.
This will allow splice to pass multiple pages in a single call and allow
certain parts of higher protocols (e.g. sunrpc, iwarp) to pass an entire
message in one go rather than having to send them piecemeal. This should
also make it easier to handle the splicing of multipage folios.
A helper, skb_splice_from_iter() is provided to do the work of splicing or
copying data from an iterator. If a page is determined to be unspliceable
(such as being in the slab), then the helper will give an error.
Note that this facility is not made available to userspace and does not
provide any sort of callback.
This set consists of the following parts:
(1) Define the MSG_SPLICE_PAGES flag and prevent sys_sendmsg() from being
able to set it.
(2) Add an extra argument to skb_append_pagefrags() so that something
other than MAX_SKB_FRAGS can be used (sysctl_max_skb_frags for
example).
(3) Add the skb_splice_from_iter() helper to handle splicing pages into
skbuffs for MSG_SPLICE_PAGES that can be shared by TCP, IP/UDP and
AF_UNIX.
(4) Implement MSG_SPLICE_PAGES support in TCP.
(5) Make do_tcp_sendpages() just wrap sendmsg() and then fold it in to its
various callers.
(6) Implement MSG_SPLICE_PAGES support in IP and make udp_sendpage() just
a wrapper around sendmsg().
(7) Implement MSG_SPLICE_PAGES support in IP6/UDP6.
(8) Implement MSG_SPLICE_PAGES support in AF_UNIX.
(9) Make AF_UNIX copy unspliceable pages.
Link: https://lore.kernel.org/r/20230316152618.711970-1-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20230329141354.516864-1-dhowells@redhat.com/ # v2
Link: https://lore.kernel.org/r/20230331160914.1608208-1-dhowells@redhat.com/ # v3
Link: https://lore.kernel.org/r/20230405165339.3468808-1-dhowells@redhat.com/ # v4
Link: https://lore.kernel.org/r/20230406094245.3633290-1-dhowells@redhat.com/ # v5
Link: https://lore.kernel.org/r/20230411160902.4134381-1-dhowells@redhat.com/ # v6
Link: https://lore.kernel.org/r/20230515093345.396978-1-dhowells@redhat.com/ # v7
Link: https://lore.kernel.org/r/20230518113453.1350757-1-dhowells@redhat.com/ # v8
====================
Link: https://lore.kernel.org/r/20230522121125.2595254-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert unix_stream_sendpage() to use sendmsg() with MSG_SPLICE_PAGES
rather than directly splicing in the pages itself.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kuniyuki Iwashima <kuniyu@amazon.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make AF_UNIX sendmsg() support MSG_SPLICE_PAGES, splicing in pages from the
source iterator if possible and copying the data in otherwise.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kuniyuki Iwashima <kuniyu@amazon.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ip_append_page() is no longer used with the removal of udp_sendpage(), so
remove it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert udp_sendpage() to use sendmsg() with MSG_SPLICE_PAGES rather than
directly splicing in the pages itself.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make IP6/UDP6 sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator if possible, copying the data if not.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make IP/UDP sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced from the source iterator.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fold do_tcp_sendpages() into its last remaining caller,
tcp_sendpage_locked().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it, allowing do_tcp_sendpages() to be removed. This is part of
replacing ->sendpage() with a call to sendmsg() with MSG_SPLICE_PAGES set.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
cc: Jason Gunthorpe <jgg@ziepe.ca>
cc: Leon Romanovsky <leon@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it, allowing do_tcp_sendpages() to be removed. This is part of
replacing ->sendpage() with a call to sendmsg() with MSG_SPLICE_PAGES set.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Boris Pismenny <borisp@nvidia.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it, allowing do_tcp_sendpages() to be removed. This is part of
replacing ->sendpage() with a call to sendmsg() with MSG_SPLICE_PAGES set.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steffen Klassert <steffen.klassert@secunet.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
do_tcp_sendpages() is now just a small wrapper around tcp_sendmsg_locked(),
so inline it. This is part of replacing ->sendpage() with a call to
sendmsg() with MSG_SPLICE_PAGES set.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: John Fastabend <john.fastabend@gmail.com>
cc: Jakub Sitnicki <jakub@cloudflare.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert do_tcp_sendpages() to use sendmsg() with MSG_SPLICE_PAGES rather
than directly splicing in the pages itself. do_tcp_sendpages() can then be
inlined in subsequent patches into its callers.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make TCP's sendmsg() support MSG_SPLICE_PAGES. This causes pages to be
spliced or copied (if it cannot be spliced) from the source iterator.
This allows ->sendpage() to be replaced by something that can handle
multiple multipage folios in a single transaction.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function to handle MSG_SPLICE_PAGES being passed internally to
sendmsg(). Pages are spliced into the given socket buffer if possible and
copied in if not (e.g. they're slab pages or have a zero refcount).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the maximum number of fragments into skb_append_pagefrags() rather
than using MAX_SKB_FRAGS so that it can be used from code that wants to
specify sysctl_max_skb_frags.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Ahern <dsahern@kernel.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Declare MSG_SPLICE_PAGES, an internal sendmsg() flag, that hints to a
network protocol that it should splice pages from the source iterator
rather than copying the data if it can. This flag is added to a list that
is cleared by sendmsg syscalls on entry.
This is intended as a replacement for the ->sendpage() op, allowing a way
to splice in several multipage folios in one go.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver's interrupt service routine is requested with the
IRQF_NO_THREAD if MSI is available. This means that the routine is
invoked in hardirq context even on PREEMPT_RT. The routine itself is
relatively short and schedules a worker, performs register access and
schedules NAPI. On PREEMPT_RT, scheduling NAPI from hardirq results in
waking ksoftirqd for further processing so using NAPI threads with this
driver is highly recommended since it NULL routes the threaded-IRQ
efforts.
Adding rtl_hw_aspm_clkreq_enable() to the ISR is problematic on
PREEMPT_RT because the function uses spinlock_t locks which become
sleeping locks on PREEMPT_RT. The locks are only used to protect
register access and don't nest into other functions or locks. They are
also not used for unbounded period of time. Therefore it looks okay to
convert them to raw_spinlock_t.
Convert the three locks which are used from the interrupt service
routine to raw_spinlock_t.
Fixes: e1ed3e4d9111 ("r8169: disable ASPM during NAPI poll")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230522134121.uxjax0F5@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add layer 4 RSS hashing on UDP traffic to allow for the
utilization of multiple queues for multiple connections on
the same IP address.
Previously, since the introduction of the driver, RSS hashing
was only performed on the source and destination IP addresses
of UDP packets thereby limiting UDP traffic to a single queue
for multiple connections on the same IP address. The transport
layer is now included in RSS hashing for UDP traffic, which
was not previously the case. The reason behind the previous
limitation is unclear - either a historic limitation of the
NFP device, or an oversight.
Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Link: https://lore.kernel.org/r/20230522141335.22536-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Walsun offers commercial ("C") and industrial ("I") variants of
multi-rate copper SFP+ modules.
Add quirk for HXSX-ATRI-1 using same parameters as the already supported
commercial variant HXSX-ATRC-1.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230522145242.30192-2-josua@solid-run.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_ring_[un]lock() use in_softirq() to decide which
spin lock variant to use, and when they are called in the
context with in_softirq() being false, spin_lock_bh() is
called in page_pool_ring_lock() while spin_unlock() is
called in page_pool_ring_unlock(), because spin_lock_bh()
has disabled the softirq in page_pool_ring_lock(), which
causes inconsistency for spin lock pair calling.
This patch fixes it by returning in_softirq state from
page_pool_producer_lock(), and use it to decide which
spin lock variant to use in page_pool_producer_unlock().
As pool->ring has both producer and consumer lock, so
rename it to page_pool_producer_[un]lock() to reflect
the actual usage. Also move them to page_pool.c as they
are only used there, and remove the 'inline' as the
compiler may have better idea to do inlining or not.
Fixes: 7886244736a4 ("net: page_pool: Add bulk support for ptr_ring")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20230522031714.5089-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fix from Jarkko Sakkinen:
"A fix to add a new entry to the deny for list for tpm_tis interrupts"
* tag 'tpmdd-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: Disable interrupts for AEON UPX-i11
|
|
Interrupts got recently enabled for tpm_tis.
The interrupts initially works on the device but they will stop arriving
after circa ~200 interrupts. On system reboot/shutdown this will cause a
long wait (120000 jiffies).
[jarkko@kernel.org: fix a merge conflict and adjust the commit message]
Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Pull Xtensa fixes from Max Filippov:
- fix signal delivery to FDPIC process
- add __bswap{si,di}2 helpers
* tag 'xtensa-20230523' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add __bswap{si,di}2 helpers
xtensa: fix signal delivery to FDPIC process
|
|
Add a selftest demonstrating using detach-mounted BPF FS using new mount
APIs, and pinning and getting BPF map using such mount. This
demonstrates how something like container manager could setup BPF FS,
pin and adjust all the necessary objects in it, all before exposing BPF
FS to a particular mount namespace.
Also add a few subtests validating all meaningful combinations of
path_fd and pathname. We use mounted /sys/fs/bpf location for these.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-5-andrii@kernel.org
|
|
Add path_fd support for bpf_obj_pin() and bpf_obj_get() operations
(through their opts-based variants). This allows to take advantage of
new kernel-side support for O_PATH-based pin/get location specification.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
|
|
Current UAPI of BPF_OBJ_PIN and BPF_OBJ_GET commands of bpf() syscall
forces users to specify pinning location as a string-based absolute or
relative (to current working directory) path. This has various
implications related to security (e.g., symlink-based attacks), forces
BPF FS to be exposed in the file system, which can cause races with
other applications.
One of the feedbacks we got from folks working with containers heavily
was that inability to use purely FD-based location specification was an
unfortunate limitation and hindrance for BPF_OBJ_PIN and BPF_OBJ_GET
commands. This patch closes this oversight, adding path_fd field to
BPF_OBJ_PIN and BPF_OBJ_GET UAPI, following conventions established by
*at() syscalls for dirfd + pathname combinations.
This now allows interesting possibilities like working with detached BPF
FS mount (e.g., to perform multiple pinnings without running a risk of
someone interfering with them), and generally making pinning/getting
more secure and not prone to any races and/or security attacks.
This is demonstrated by a selftest added in subsequent patch that takes
advantage of new mount APIs (fsopen, fsconfig, fsmount) to demonstrate
creating detached BPF FS mount, pinning, and then getting BPF map out of
it, all while never exposing this private instance of BPF FS to outside
worlds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
|
|
When using DMA mode we are facing with Oops:
[ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c
[ 396.469374] Oops [#1]
[ 396.471839] Modules linked in:
[ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68
[ 396.483619] Hardware name: YMP ELCT FPGA (DT)
[ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342
[ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342
[ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0
[ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000
[ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990
[ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8
[ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000
[ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038
[ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8
[ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5
[ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254
[ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577
[ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8
[ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d
[ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68
[ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502
[ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e
[ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e
[ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212
[ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60
[ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a
[ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218
[ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6
[ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26
[ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96
[ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6
[ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e
[ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c
[ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2
[ 396.674964] ---[ end trace 0000000000000000 ]---
It happens because of play_dma_data/capture_dma_data pointers are NULL.
Current implementation assigns these pointers at snd_soc_dai_driver
startup() callback and reset them back to NULL at shutdown(). But
soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open()
before snd_soc_dai_driver startup().
Most generic DMA capable I2S drivers use snd_soc_dai_driver probe()
callback to init DMA pointers only once at probe. So move DMA init
to dw_i2s_dai_probe and drop shutdown() and startup() callbacks.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bump libbpf.map to v1.3.0 to start a new libbpf version cycle.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-3-andrii@kernel.org
|
|
Several values do not match the defaults of CS35L41, fix them.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230414152552.574502-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
