| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
Currently, the clk manager matches SocVoltage with voltage from
fused settings (dfPstate clock table). And then corresponding clocks
are selected.
However in certain situations, this leads to clk manager not
including at least one entry with highest supported clock setting.
[How]
Update the clk manager to include at least one entry with highest
supported clock setting.
Reviewed-by: Pavle Kotarac <pavle.kotarac@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support EccInfoTable which includes umc ras error count and
error address.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't need to query error count and error address on harvest umc nodes.
v2: Fix code bug, use active_mask instead of harvsest_config
and remove unnecessary argument in LOOP macro.
v3: Leave adev->gmc.num_umc unchanged.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is useful to understand the bpc defaults and
support of a driver.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The EDID of an HDR display defines EOTFs that are supported
by the display and can be set in the HDR metadata infoframe.
Userspace is expected to read the EDID and set an appropriate
HDR_OUTPUT_METADATA.
In drm_parse_hdr_metadata_block the kernel reads the supported
EOTFs from the EDID and stores them in the
drm_connector->hdr_sink_metadata. While doing so it also
filters the EOTFs to the EOTFs the kernel knows about.
When an HDR_OUTPUT_METADATA is set it then checks to
make sure the EOTF is a supported EOTF. In cases where
the kernel doesn't know about a new EOTF this check will
fail, even if the EDID advertises support.
Since it is expected that userspace reads the EDID to understand
what the display supports it doesn't make sense for DRM to block
an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't
understand.
This comes with the added benefit of future-proofing metadata
support. If the spec defines a new EOTF there is no need to
update DRM and an compositor can immediately make use of it.
Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609
v2: Distinguish EOTFs defind in kernel and ones defined
in EDID in the commit description (Pekka)
v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved
to drm_hdmi_helper.c
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-2-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Chris pointed out that some bonehead, *cough* me *cough*, added two
mutex_locks() to the SiFive errata patching. The second was meant to
have been a mutex_unlock().
This results in errors such as
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted
6.2.0-rc1-starlight-00079-g9493e6f3ce02 #229
Hardware name: BeagleV Starlight Beta (DT)
epc : __schedule+0x42/0x500
ra : schedule+0x46/0xce
epc : ffffffff8065957c ra : ffffffff80659a80 sp : ffffffff81203c80
gp : ffffffff812d50a0 tp : ffffffff8120db40 t0 : ffffffff81203d68
t1 : 0000000000000001 t2 : 4c45203a76637369 s0 : ffffffff81203cf0
s1 : ffffffff8120db40 a0 : 0000000000000000 a1 : ffffffff81213958
a2 : ffffffff81213958 a3 : 0000000000000000 a4 : 0000000000000000
a5 : ffffffff80a1bd00 a6 : 0000000000000000 a7 : 0000000052464e43
s2 : ffffffff8120db41 s3 : ffffffff80a1ad00 s4 : 0000000000000000
s5 : 0000000000000002 s6 : ffffffff81213938 s7 : 0000000000000000
s8 : 0000000000000000 s9 : 0000000000000001 s10: ffffffff812d7204
s11: ffffffff80d3c920 t3 : 0000000000000001 t4 : ffffffff812e6dd7
t5 : ffffffff812e6dd8 t6 : ffffffff81203bb8
status: 0000000200000100 badaddr: 0000000000000030 cause: 000000000000000d
[<ffffffff80659a80>] schedule+0x46/0xce
[<ffffffff80659dce>] schedule_preempt_disabled+0x16/0x28
[<ffffffff8065ae0c>] __mutex_lock.constprop.0+0x3fe/0x652
[<ffffffff8065b138>] __mutex_lock_slowpath+0xe/0x16
[<ffffffff8065b182>] mutex_lock+0x42/0x4c
[<ffffffff8000ad94>] sifive_errata_patch_func+0xf6/0x18c
[<ffffffff80002b92>] _apply_alternatives+0x74/0x76
[<ffffffff80802ee8>] apply_boot_alternatives+0x3c/0xfa
[<ffffffff80803cb0>] setup_arch+0x60c/0x640
[<ffffffff80800926>] start_kernel+0x8e/0x99c
---[ end trace 0000000000000000 ]---
Reported-by: Chris Hofstaedtler <zeha@debian.org>
Fixes: 9493e6f3ce02 ("RISC-V: take text_mutex during alternative patching")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230302174154.970746-1-conor@kernel.org
[Palmer: pick up Geert's bug report from the thread]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask
optimizations") changed cpumask_setall() to use "bitmap_set()" instead
of "bitmap_fill()", because bitmap_fill() would explicitly set all the
bits of a constant sized small bitmap, and that's exactly what we don't
want: we want to only set bits up to 'nr_cpu_ids', which is what
"bitmap_set()" does.
However, Yury correctly points out that while "bitmap_set()" does indeed
only set bits up to the required bitmap size, it doesn't _clear_ bits
above that size, so the upper bits would still not have well-defined
values.
Now, none of this should really matter, since any bits set past
'nr_cpu_ids' should always be ignored in the first place. Yes, the bit
scanning functions might return them as a result, but since users should
always consider the ">= nr_cpu_ids" condition to mean "no more bits",
that shouldn't have any actual effect (see previous commit 8ca09d5fa354
"cpumask: fix incorrect cpumask scanning result checks").
But let's just do it right, the way the code was _intended_ to work. We
have had enough lazy code that works but bites us in the *rse later
(again, see previous commit) that there's no reason to not just do this
properly.
It turns out that "bitmap_fill()" gets this all right for the complex
case, and really only fails for the inlined optimized case that just
fills the whole word. And while we could just fix bitmap_fill() to use
the proper last word mask, there's two issues with that:
- the cpumask case wants to do the _optimization_ based on "NR_CPUS is
a small constant", but then wants to do the actual bit _fill_ based
on "nr_cpu_ids" that isn't necessarily that same constant
- we have lots of non-cpumask users of bitmap_fill(), and while they
hopefully don't care, and probably would want the proper semantics
anyway ("only set bits up to the limit"), I do not want the cpumask
changes to impact other parts
So this ends up just doing the single-word optimization by hand in the
cpumask code. If our cpumask is fundamentally limited to a single word,
just do the proper "fill in that word" exactly. And if it's the more
complex multi-word case, then the generic bitmap_fill() will DTRT.
This is all an example of how our bitmap function optimizations really
are somewhat broken. They conflate the "this is size of the bitmap"
optimizations with the actual bit(s) we want to set.
In many cases we really want to have the two be separate things:
sometimes we base our optimizations on the size of the whole bitmap ("I
know this whole bitmap fits in a single word, so I'll just use
single-word accesses"), and sometimes we base them on the bit we are
looking at ("this is just acting on bits that are in the first word, so
I'll use single-word accesses").
Notice how the end result of the two optimizations are the same, but the
way we get to them are quite different.
And all our cpumask optimization games are really about that fundamental
distinction, and we'd often really want to pass in both the "this is the
bit I'm working on" (which _can_ be a small constant but might be
variable), and "I know it's in this range even if it's variable" (based
on CONFIG_NR_CPUS).
So this cpumask_setall() implementation just makes that explicit. It
checks the "I statically know the size is small" using the known static
size of the cpumask (which is what that 'small_cpumask_bits' is all
about), but then sets the actual bits using the exact number of cpus we
have (ie 'nr_cpumask_bits')
Of course, in a perfect world, the compiler would have done all the
range analysis (possibly with help from us just telling it that
"this value is always in this range"), and would do all of this for us.
But that is not the world we live in.
While we dream of that perfect world, this does that manual logic to
make it all work out. And this was a very long explanation for a small
code change that shouldn't even matter.
Reported-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Flole observes this WARNING on occasion:
[1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0
Reported-by: <flole@flole.de>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123
Fixes: 73da852e3831 ("nfsd: use vfs_iter_read/write")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add the following Telit FE990 composition:
0x1080: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306120528.198842-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990
0x1081 composition in order to avoid bind error.
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Link: https://lore.kernel.org/r/20230306115933.198259-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Restore ctnetlink zero mark in events and dump, from Ivan Delalande.
2) Fix deadlock due to missing disabled bh in tproxy, from Florian Westphal.
3) Safer maximum chain load in conntrack, from Eric Dumazet.
* 'main' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: adopt safer max chain length
netfilter: tproxy: fix deadlock due to missing BH disable
netfilter: ctnetlink: revert to dumping mark regardless of event type
====================
Link: https://lore.kernel.org/r/20230307100424.2037-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Initialize shift variable in mlxplat_mlxcpld_verify_bus_topology()
to 0 to avoid the following compile error:
drivers/platform/x86/mlx-platform.c:6013
mlxplat_mlxcpld_verify_bus_topology() error: uninitialized symbol 'shift'.
Fixes: 50b823fdd357 ("platform: mellanox: mlx-platform: Move bus shift assignment out of the loop")
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230307105842.286118-1-hdegoede@redhat.com
|
|
Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230302102611.314341-1-dan.scally@ideasonboard.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix warning displayed for "make W=1" for kernel documentation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230211063257.311746-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: ef0f62264b2a ("platform/x86: mlx-platform: Add physical bus number auto detection")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vadim Pasternak <vadimp@mellanox.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-7-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
For NVSW_SN2201, select REGMAP_I2C instead of depending on it.
Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: 5ec4a8ace06c ("platform/mellanox: Introduce support for Mellanox register access driver")
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Shych <michaelsh@nvidia.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Vadim Pasternak <vadimp@nvidia.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-6-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix warning:
drivers/platform/x86/intel/tpmi.c:253 tpmi_create_device()
warn: 'feature_vsec_dev' was already freed.
If there is some error, feature_vsec_dev memory is freed as part
of resource managed call intel_vsec_add_aux(). So, additional
kfree() call is not required.
Reordered res allocation and feature_vsec_dev, so that on error
only res is freed.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/platform-driver-x86/Y%2FxYR7WGiPayZu%2FR@kili/T/#u
Fixes: 47731fd2865f ("platform/x86/intel: Intel TPMI enumeration driver")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230227140614.2913474-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
A new command CONFIG_TDP_GET_RATIO_INFO is added, with sub command type
of 0x0C. The previous range of valid sub commands was from 0x00 to 0x0B.
Change the valid range from 0x00 to 0x0C.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230227053504.2734214-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
After using the built-in UEFI hardware diagnostics to compare
the measured battery temperature, i noticed that the temperature
is actually expressed in tenth degree kelvin, similar to the
SBS-Data standard. For example, a value of 2992 is displayed as
26 degrees celsius.
Fix the scaling so that the correct values are being displayed.
Tested on a Dell Inspiron 3505.
Fixes: a77272c16041 ("platform/x86: dell: Add new dell-wmi-ddv driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230218115318.20662-2-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
If one or both sensor buffers could not be initialized, either
due to missing hardware support or due to some error during probing,
the resume handler will encounter undefined behaviour when
attempting to lock buffers then protected by an uninitialized or
destroyed mutex.
Fix this by introducing a "active" flag which is set during probe,
and only invalidate buffers which where flaged as "active".
Tested on a Dell Inspiron 3505.
Fixes: 3b7eeff93d29 ("platform/x86: dell-ddv: Add hwmon support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230218115318.20662-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The amd_pmc_write_stb() function was previously hidden in an
ifdef to avoid a warning when CONFIG_SUSPEND is disabled, but
now there is an additional caller:
drivers/platform/x86/amd/pmc.c: In function 'amd_pmc_stb_debugfs_open_v2':
drivers/platform/x86/amd/pmc.c:256:8: error: implicit declaration of function 'amd_pmc_write_stb'; did you mean 'amd_pmc_read_stb'? [-Werror=implicit-function-declaration]
256 | ret = amd_pmc_write_stb(dev, AMD_PMC_STB_DUMMY_PC);
| ^~~~~~~~~~~~~~~~~
| amd_pmc_read_stb
There is now an easier way to handle this using DEFINE_SIMPLE_DEV_PM_OPS()
to replace all the #ifdefs, letting gcc drop any of the unused functions
silently.
Fixes: b0d4bb973539 ("platform/x86/amd: pmc: Write dummy postcode into the STB DRAM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230214152512.806188-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Customers using GKE 1.25 and 1.26 are facing conntrack issues
root caused to commit c9c3b6811f74 ("netfilter: conntrack: make
max chain length random").
Even if we assume Uniform Hashing, a bucket often reachs 8 chained
items while the load factor of the hash table is smaller than 0.5
With a limit of 16, we reach load factors of 3.
With a limit of 32, we reach load factors of 11.
With a limit of 40, we reach load factors of 15.
With a limit of 50, we reach load factors of 24.
This patch changes MIN_CHAINLEN to 50, to minimize risks.
Ideally, we could in the future add a cushion based on expected
load factor (2 * nf_conntrack_max / nf_conntrack_buckets),
because some setups might expect unusual values.
Fixes: c9c3b6811f74 ("netfilter: conntrack: make max chain length random")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-06
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 9 files changed, 64 insertions(+), 18 deletions(-).
The main changes are:
1) Fix BTF resolver for DATASEC sections when a VAR points at a modifier,
that is, keep resolving such instances instead of bailing out,
from Lorenz Bauer.
2) Fix BPF test framework with regards to xdp_frame info misplacement
in the "live packet" code, from Alexander Lobakin.
3) Fix an infinite loop in BPF sockmap code for TCP/UDP/AF_UNIX,
from Liu Jian.
4) Fix a build error for riscv BPF JIT under PERF_EVENTS=n,
from Randy Dunlap.
5) Several BPF doc fixes with either broken links or external instead
of internal doc links, from Bagas Sanjaya.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: check that modifier resolves after pointer
btf: fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR
bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES
bpf, doc: Link to submitting-patches.rst for general patch submission info
bpf, doc: Do not link to docs.kernel.org for kselftest link
bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
riscv, bpf: Fix patch_text implicit declaration
bpf, docs: Fix link to BTF doc
====================
Link: https://lore.kernel.org/r/20230306215944.11981-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RISC-V ELF attributes don't contain any useful information. New
toolchains ignore them, but they frequently trip up various older/mixed
toolchains. So just turn them off.
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230223224605.6995-1-palmer@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Adrien reports that incorrect data is transmitted when a single
page straddles multiple records. We would transmit the same
data in all iterations of the loop.
Reported-by: Adrien Moulin <amoulin@corp.free.fr>
Link: https://lore.kernel.org/all/61481278.42813558.1677845235112.JavaMail.zimbra@corp.free.fr
Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()")
Tested-by: Adrien Moulin <amoulin@corp.free.fr>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/r/20230304192610.3818098-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix data corruption issue with SerDes connected PHYs operating at 1.25
Gbps speed where we could previously observe about 30% packet loss while
the bad packet counter was increasing.
As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531
switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using
rate-adaptation to 2500Base-X mode, this issue only got exposed now when
we started trying to use SFP modules operating with 1.25 Gbps with the
BananaPi R3 board.
The fix is to set bit 12 which disables the RX FIFO clear function when
setting up MAC MCR, MediaTek SDK did the same change stating:
"If without this patch, kernel might receive invalid packets that are
corrupted by GMAC."[1]
[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63
Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently link up can't be detected in forced mode if polling
isn't used. Only link up interrupt source we have is aneg
complete which isn't applicable in forced mode. Therefore we
have to use energy-on as link up indicator.
Fixes: 7365494550f6 ("net: phy: smsc: skip ENERGYON interrupt if disabled")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adrian is the main author of the Intel PT codebase and has been
reviewing perf tooling patches consistently for a long time, so lets
reflect that in the MAINTAINERS file so that contributors add him to the
CC list in patch submissions.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/ZAYosCjlzO9plAYO@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
09519ec3b19e4144 ("perf: Add perf_event_attr::config3")
The patches for the tooling side will come later.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/ZAZLYmDjWjSItWOq@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It turns out that commit 596ff4a09b89 ("cpumask: re-introduce
constant-sized cpumask optimizations") exposed a number of cases of
drivers not checking the result of "cpumask_next()" and friends
correctly.
The documented correct check for "no more cpus in the cpumask" is to
check for the result being equal or larger than the number of possible
CPU ids, exactly _because_ we've always done those constant-sized
cpumask scans using a widened type before. So the return value of a
cpumask scan should be checked with
if (cpu >= nr_cpu_ids)
...
because the cpumask scan did not necessarily stop exactly *at* that
maximum CPU id.
But a few cases ended up instead using checks like
if (cpu == nr_cpumask_bits)
...
which used that internal "widened" number of bits. And that used to
work pretty much by accident (ok, in this case "by accident" is simply
because it matched the historical internal implementation of the cpumask
scanning, so it was more of a "intentionally using implementation
details rather than an accident").
But the extended constant-sized optimizations then did that internal
implementation differently, and now that code that did things wrong but
matched the old implementation no longer worked at all.
Which then causes subsequent odd problems due to using what ends up
being an invalid CPU ID.
Most of these cases require either unusual hardware or special uses to
hit, but the random.c one triggers quite easily.
All you really need is to have a sufficiently small CONFIG_NR_CPUS value
for the bit scanning optimization to be triggered, but not enough CPUs
to then actually fill that widened cpumask. At that point, the cpumask
scanning will return the NR_CPUS constant, which is _not_ the same as
nr_cpumask_bits.
This just does the mindless fix with
sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/'
to fix the incorrect uses.
The ones in the SCSI lpfc driver in particular could probably be fixed
more cleanly by just removing that repeated pattern entirely, but I am
not emptionally invested enough in that driver to care.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/481b19b5-83a0-4793-b4fd-194ad7b978c3@roeck-us.net/
Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/
Reported-by: Vernon Yang <vernon2gm@gmail.com>
Link: https://lore.kernel.org/lkml/20230306160651.2016767-1-vernon2gm@gmail.com/
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Lorenz Bauer says:
====================
See the first patch for a detailed explanation.
v2:
- Move RESOLVE_TBD assignment out of the loop (Martin)
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-3-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
btf_datasec_resolve contains a bug that causes the following BTF
to fail loading:
[1] DATASEC a size=2 vlen=2
type_id=4 offset=0 size=1
type_id=7 offset=1 size=1
[2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[3] PTR (anon) type_id=2
[4] VAR a type_id=3 linkage=0
[5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[6] TYPEDEF td type_id=5
[7] VAR b type_id=6 linkage=0
This error message is printed during btf_check_all_types:
[1] DATASEC a size=2 vlen=2
type_id=7 offset=1 size=1 Invalid type
By tracing btf_*_resolve we can pinpoint the problem:
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0
btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22
The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.
if (!env_type_is_resolve_sink(env, var_type) &&
!env_type_is_resolved(env, var_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, var_type, var_type_id);
}
env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:
(btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved()
Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.
if (!btf_type_id_size(btf, &type_id, &type_size)) {
btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
return -EINVAL;
}
Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.
To summarise, the following conditions are necessary:
- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
TYPE_TAG
The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.
Fixes: 1dc92851849c ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for nouveau preventing the system shutdown and one for a build
warning, and NULL pointer dereference fix for cirrus.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223083839.5gtmu6i42bnj7pfh@houat
|
|
&xdp_buff and &xdp_frame are bound in a way that
xdp_buff->data_hard_start == xdp_frame
It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:
for (u32 i = 0; i < 0xdead; i++) {
xdpf = xdp_convert_buff_to_frame(&xdp);
xdp_convert_frame_to_buff(xdpf, &xdp);
}
shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.
Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.
Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.
(was found while testing XDP traffic generator on ice, which calls
xdp_convert_frame_to_buff() for each XDP frame)
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230224163607.2994755-1-aleksander.lobakin@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The never used nr_cpumask_size is just a typo, hence use existing
redefinition that's called nr_cpumask_bits.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
range
At btrfs_drop_extent_map_range() we are clearing the EXTENT_FLAG_LOGGING
bit on a 'flags' variable that was not initialized. This makes static
checkers complain about it, so initialize the 'flags' variable before
clearing the bit.
In practice this has no consequences, because EXTENT_FLAG_LOGGING should
not be set when btrfs_drop_extent_map_range() is called, as an fsync locks
the inode in exclusive mode, locks the inode's mmap semaphore in exclusive
mode too and it always flushes all delalloc.
Also add a comment about why we clear EXTENT_FLAG_LOGGING on a copy of the
flags of the split extent map.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/Y%2FyipSVozUDEZKow@kili/
Fixes: db21370bffbc ("btrfs: drop extent map range more efficiently")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a report, that the info message for block-group reclaim is
crossing the 100% used mark.
This is happening as we were truncating the divisor for the division
(the block_group->length) to a 32bit value.
Fix this by using div64_u64() to not truncate the divisor.
In the worst case, it can lead to a div by zero error and should be
possible to trigger on 4 disks RAID0, and each device is large enough:
$ mkfs.btrfs -f /dev/test/scratch[1234] -m raid1 -d raid0
btrfs-progs v6.1
[...]
Filesystem size: 40.00GiB
Block group profiles:
Data: RAID0 4.00GiB <<<
Metadata: RAID1 256.00MiB
System: RAID1 8.00MiB
Reported-by: Forza <forza@tnonline.net>
Link: https://lore.kernel.org/linux-btrfs/e99483.c11a58d.1863591ca52@tnonline.net/
Fixes: 5f93e776c673 ("btrfs: zoned: print unusable percentage when reclaiming block groups")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add Qu's note ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Current btrfs_log_dev_io_error() increases the read error count even if the
erroneous IO is a WRITE request. This is because it forget to use "else
if", and all the error WRITE requests counts as READ error as there is (of
course) no REQ_RAHEAD bit set.
Fixes: c3a62baf21ad ("btrfs: use chained bios when cloning")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Even if the slot is already read out, we may still need to re-balance
the tree, thus it can cause error in that btrfs_del_item() call and we
need to handle it properly.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: void0red <void0red@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently user space utilizes dev info ioctl to grab the info of a
certain devid, this includes its device uuid. But the returned info is
not enough to determine if a device is a seed.
Commit a26d60dedf9a ("btrfs: sysfs: add devinfo/fsid to retrieve actual
fsid from the device") exports the same value in sysfs so this is for
parity with ioctl. Add a new member, fsid, into
btrfs_ioctl_dev_info_args, and populate the member with fsid value.
This should not cause any compatibility problem, following the
combinations:
- Old user space, old kernel
- Old user space, new kernel
User space tool won't even check the new member.
- New user space, old kernel
The kernel won't touch the new member, and user space tool should
zero out its argument, thus the new member is all zero.
User space tool can then know the kernel doesn't support this fsid
reporting, and falls back to whatever they can.
- New user space, new kernel
Go as planned.
Would find the fsid member is no longer zero, and trust its value.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As reported by Filipe, there's a potential deadlock caused by
using btrfs_search_forward on commit_root. The locking there is
unconditional, even if ->skip_locking and ->search_commit_root is set.
It's not meant to be used for commit roots, so it always needs to do
locking.
So if another task is COWing a child node of the same root node and
then needs to wait for block group caching to complete when trying to
allocate a metadata extent, it deadlocks.
For example:
[539604.239315] sysrq: Show Blocked State
[539604.240133] task:kworker/u16:6 state:D stack:0 pid:2119594 ppid:2 flags:0x00004000
[539604.241613] Workqueue: btrfs-cache btrfs_work_helper [btrfs]
[539604.242673] Call Trace:
[539604.243129] <TASK>
[539604.243925] __schedule+0x41d/0xee0
[539604.244797] ? rcu_read_lock_sched_held+0x12/0x70
[539604.245399] ? rwsem_down_read_slowpath+0x185/0x490
[539604.246111] schedule+0x5d/0xf0
[539604.246593] rwsem_down_read_slowpath+0x2da/0x490
[539604.247290] ? rcu_barrier_tasks_trace+0x10/0x20
[539604.248090] __down_read_common+0x3d/0x150
[539604.248702] down_read_nested+0xc3/0x140
[539604.249280] __btrfs_tree_read_lock+0x24/0x100 [btrfs]
[539604.250097] btrfs_read_lock_root_node+0x48/0x60 [btrfs]
[539604.250915] btrfs_search_forward+0x59/0x460 [btrfs]
[539604.251781] ? btrfs_global_root+0x50/0x70 [btrfs]
[539604.252476] caching_thread+0x1be/0x920 [btrfs]
[539604.253167] btrfs_work_helper+0xf6/0x400 [btrfs]
[539604.253848] process_one_work+0x24f/0x5a0
[539604.254476] worker_thread+0x52/0x3b0
[539604.255166] ? __pfx_worker_thread+0x10/0x10
[539604.256047] kthread+0xf0/0x120
[539604.256591] ? __pfx_kthread+0x10/0x10
[539604.257212] ret_from_fork+0x29/0x50
[539604.257822] </TASK>
[539604.258233] task:btrfs-transacti state:D stack:0 pid:2236474 ppid:2 flags:0x00004000
[539604.259802] Call Trace:
[539604.260243] <TASK>
[539604.260615] __schedule+0x41d/0xee0
[539604.261205] ? rcu_read_lock_sched_held+0x12/0x70
[539604.262000] ? rwsem_down_read_slowpath+0x185/0x490
[539604.262822] schedule+0x5d/0xf0
[539604.263374] rwsem_down_read_slowpath+0x2da/0x490
[539604.266228] ? lock_acquire+0x160/0x310
[539604.266917] ? rcu_read_lock_sched_held+0x12/0x70
[539604.267996] ? lock_contended+0x19e/0x500
[539604.268720] __down_read_common+0x3d/0x150
[539604.269400] down_read_nested+0xc3/0x140
[539604.270057] __btrfs_tree_read_lock+0x24/0x100 [btrfs]
[539604.271129] btrfs_read_lock_root_node+0x48/0x60 [btrfs]
[539604.272372] btrfs_search_slot+0x143/0xf70 [btrfs]
[539604.273295] update_block_group_item+0x9e/0x190 [btrfs]
[539604.274282] btrfs_start_dirty_block_groups+0x1c4/0x4f0 [btrfs]
[539604.275381] ? __mutex_unlock_slowpath+0x45/0x280
[539604.276390] btrfs_commit_transaction+0xee/0xed0 [btrfs]
[539604.277391] ? lock_acquire+0x1a4/0x310
[539604.278080] ? start_transaction+0xcb/0x6c0 [btrfs]
[539604.279099] transaction_kthread+0x142/0x1c0 [btrfs]
[539604.279996] ? __pfx_transaction_kthread+0x10/0x10 [btrfs]
[539604.280673] kthread+0xf0/0x120
[539604.281050] ? __pfx_kthread+0x10/0x10
[539604.281496] ret_from_fork+0x29/0x50
[539604.281966] </TASK>
[539604.282255] task:fsstress state:D stack:0 pid:2236483 ppid:1 flags:0x00004006
[539604.283897] Call Trace:
[539604.284700] <TASK>
[539604.285088] __schedule+0x41d/0xee0
[539604.285660] schedule+0x5d/0xf0
[539604.286175] btrfs_wait_block_group_cache_progress+0xf2/0x170 [btrfs]
[539604.287342] ? __pfx_autoremove_wake_function+0x10/0x10
[539604.288450] find_free_extent+0xd93/0x1750 [btrfs]
[539604.289256] ? _raw_spin_unlock+0x29/0x50
[539604.289911] ? btrfs_get_alloc_profile+0x127/0x2a0 [btrfs]
[539604.290843] btrfs_reserve_extent+0x147/0x290 [btrfs]
[539604.291943] btrfs_alloc_tree_block+0xcb/0x3e0 [btrfs]
[539604.292903] __btrfs_cow_block+0x138/0x580 [btrfs]
[539604.293773] btrfs_cow_block+0x10e/0x240 [btrfs]
[539604.294595] btrfs_search_slot+0x7f3/0xf70 [btrfs]
[539604.295585] btrfs_update_device+0x71/0x1b0 [btrfs]
[539604.296459] btrfs_chunk_alloc_add_chunk_item+0xe0/0x340 [btrfs]
[539604.297489] btrfs_chunk_alloc+0x1bf/0x490 [btrfs]
[539604.298335] find_free_extent+0x6fa/0x1750 [btrfs]
[539604.299174] ? _raw_spin_unlock+0x29/0x50
[539604.299950] ? btrfs_get_alloc_profile+0x127/0x2a0 [btrfs]
[539604.300918] btrfs_reserve_extent+0x147/0x290 [btrfs]
[539604.301797] btrfs_alloc_tree_block+0xcb/0x3e0 [btrfs]
[539604.303017] ? lock_release+0x224/0x4a0
[539604.303855] __btrfs_cow_block+0x138/0x580 [btrfs]
[539604.304789] btrfs_cow_block+0x10e/0x240 [btrfs]
[539604.305611] btrfs_search_slot+0x7f3/0xf70 [btrfs]
[539604.306682] ? btrfs_global_root+0x50/0x70 [btrfs]
[539604.308198] lookup_inline_extent_backref+0x17b/0x7a0 [btrfs]
[539604.309254] lookup_extent_backref+0x43/0xd0 [btrfs]
[539604.310122] __btrfs_free_extent+0xf8/0x810 [btrfs]
[539604.310874] ? lock_release+0x224/0x4a0
[539604.311724] ? btrfs_merge_delayed_refs+0x17b/0x1d0 [btrfs]
[539604.313023] __btrfs_run_delayed_refs+0x2ba/0x1260 [btrfs]
[539604.314271] btrfs_run_delayed_refs+0x8f/0x1c0 [btrfs]
[539604.315445] ? rcu_read_lock_sched_held+0x12/0x70
[539604.316706] btrfs_commit_transaction+0xa2/0xed0 [btrfs]
[539604.317855] ? do_raw_spin_unlock+0x4b/0xa0
[539604.318544] ? _raw_spin_unlock+0x29/0x50
[539604.319240] create_subvol+0x53d/0x6e0 [btrfs]
[539604.320283] btrfs_mksubvol+0x4f5/0x590 [btrfs]
[539604.321220] __btrfs_ioctl_snap_create+0x11b/0x180 [btrfs]
[539604.322307] btrfs_ioctl_snap_create_v2+0xc6/0x150 [btrfs]
[539604.323295] btrfs_ioctl+0x9f7/0x33e0 [btrfs]
[539604.324331] ? rcu_read_lock_sched_held+0x12/0x70
[539604.325137] ? lock_release+0x224/0x4a0
[539604.325808] ? __x64_sys_ioctl+0x87/0xc0
[539604.326467] __x64_sys_ioctl+0x87/0xc0
[539604.327109] do_syscall_64+0x38/0x90
[539604.327875] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[539604.328792] RIP: 0033:0x7f05a7babaeb
This needs to use regular btrfs_search_slot() with some skip and stop
logic.
Since we only consider five samples (five search slots), don't bother
with the complexity of looking for commit_root_sem contention. If
necessary, it can be added to the load function in between samples.
Reported-by: Filipe Manana <fdmanana@kernel.org>
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H7eKMD44Z1+=Kb-1RFMMeZpAm2fwyO59yeBwCcSOU80Pg@mail.gmail.com/
Fixes: c7eec3d9aa95 ("btrfs: load block group size class when caching")
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To pick the changes from:
8415a74852d7c247 ("x86/cpu, kvm: Add support for CPUID_80000021_EAX")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZAYlS2XTJ5hRtss7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The link for patch submission information in general refers to index
page for "Working with the kernel development community" section of
kernel docs, whereas the link should have been
Documentation/process/submitting-patches.rst instead.
Fix it by replacing the index target with the appropriate doc.
Fixes: 542228384888f5 ("bpf, doc: convert bpf_devel_QA.rst to use RST formatting")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230228074523.11493-3-bagasdotme@gmail.com
|
|
The question on how to run BPF selftests have a reference link to kernel
selftest documentation (Documentation/dev-tools/kselftest.rst). However,
it uses external link to the documentation at kernel.org/docs (aka
docs.kernel.org) instead, which requires Internet access.
Fix this and replace the link with internal linking, by using :doc: directive
while keeping the anchor text.
Fixes: b7a27c3aafa252 ("bpf, doc: howto use/run the BPF selftests")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230228074523.11493-2-bagasdotme@gmail.com
|
|
Now that address space operations are merge dfor in-ICB and normal
files, it is more likely some code mistakenly tries to map blocks for
in-ICB files. WARN and return error instead of silently returning
garbage.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
After merging address space operations of normal and in-ICB files,
readahead could get called for in-ICB files which resulted in
udf_get_block() being called for these files. udf_get_block() is not
prepared to be called for in-ICB files and ends up returning garbage
results as it interprets file data as extent list. Fix the problem by
skipping readahead for in-ICB files.
Fixes: 37a8a39f7ad3 ("udf: Switch to single address_space_operations")
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The patch converting udf_adinicb_writepage() to avoid manually kmapping
the page used memcpy_to_page() however that copies in the wrong
direction (effectively overwriting file data with the old contents).
What we should be using is memcpy_from_page() to copy data from the page
into the inode and then mark inode dirty to store the data.
Fixes: 5cfc45321a6d ("udf: Convert udf_adinicb_writepage() to memcpy_to_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon.
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Link: https://lore.kernel.org/r/alpine.LNX.2.21.1904091023540.25@nippy.intranet
Link: https://lore.kernel.org/r/63130691-1984-c423-c1f2-73bfd8d3dcd3@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230301021107.26307-1-schmitzmic@gmail.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
When booting with an initial ramdisk on platforms where physical memory
does not start at address zero (e.g. on Amiga):
initrd: 0ef0602c - 0f800000
Zone ranges:
DMA [mem 0x0000000008000000-0x000000f7ffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000008000000-0x000000000f7fffff]
Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff]
Unable to handle kernel access at virtual address (ptrval)
Oops: 00000000
Modules linked in:
PC: [<00201d3c>] memcmp+0x28/0x56
As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must
not be called before paging_init(). Hence postpone the phys_to_virt
handling for the initial ramdisk until after calling paging_init().
While at it, reduce #ifdef clutter by using IS_ENABLED() instead.
Fixes: 376e3fdecb0dcae2 ("m68k: Enable memtest functionality")
Reported-by: Stephen Walsh <vk3heg@vk3heg.net>
Link: https://lists.debian.org/debian-68k/2022/09/msg00007.html
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/4f45f05f377bf3f5baf88dbd5c3c8aeac59d94f0.camel@physik.fu-berlin.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/dff216da09ab7a60217c3fc2147e671ae07d636f.1677528627.git.geert@linux-m68k.org
|
