| Age | Commit message (Collapse) | Author |
|---|
|
The remainder of vma_modify() relies upon the vmg state remaining pristine
after a merge attempt.
Usually this is the case, however in the one edge case scenario of a merge
attempt failing not due to the specified range being unmergeable, but
rather due to an out of memory error arising when attempting to commit the
merge, this assumption becomes untrue.
This results in vmg->start, end being modified, and thus the proceeding
attempts to split the VMA will be done with invalid start/end values.
Thankfully, it is likely practically impossible for us to hit this in
reality, as it would require a maple tree node pre-allocation failure that
would likely never happen due to it being 'too small to fail', i.e. the
kernel would simply keep retrying reclaim until it succeeded.
However, this scenario remains theoretically possible, and what we are
doing here is wrong so we must correct it.
The safest option is, when this scenario occurs, to simply give up the
operation. If we cannot allocate memory to merge, then we cannot allocate
memory to split either (perhaps moreso!).
Any scenario where this would be happening would be under very extreme
(likely fatal) memory pressure, so it's best we give up early.
So there is no doubt it is appropriate to simply bail out in this
scenario.
However, in general we must if at all possible never assume VMG state is
stable after a merge attempt, since merge operations update VMG fields.
As a result, additionally also make this clear by storing start, end in
local variables.
The issue was reported originally by syzkaller, and by Brad Spengler (via
an off-list discussion), and in both instances it manifested as a
triggering of the assert:
VM_WARN_ON_VMG(start >= end, vmg);
In vma_merge_existing_range().
It seems at least one scenario in which this is occurring is one in which
the merge being attempted is due to an madvise() across multiple VMAs
which looks like this:
start end
|<------>|
|----------|------|
| vma | next |
|----------|------|
When madvise_walk_vmas() is invoked, we first find vma in the above
(determining prev to be equal to vma as we are offset into vma), and then
enter the loop.
We determine the end of vma that forms part of the range we are
madvise()'ing by setting 'tmp' to this value:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
We then invoke the madvise() operation via visit(), letting prev get
updated to point to vma as part of the operation:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where the visit() function pointer in this instance is
madvise_vma_behavior().
As observed in syzkaller reports, it is ultimately madvise_update_vma()
that is invoked, calling vma_modify_flags_name() and vma_modify() in turn.
Then, in vma_modify(), we attempt the merge:
merged = vma_merge_existing_range(vmg);
if (merged)
return merged;
We invoke this with vmg->start, end set to start, tmp as such:
start tmp
|<--->|
|----------|------|
| vma | next |
|----------|------|
We find ourselves in the merge right scenario, but the one in which we
cannot remove the middle (we are offset into vma).
Here we have a special case where vmg->start, end get set to perhaps
unintuitive values - we intended to shrink the middle VMA and expand the
next.
This means vmg->start, end are set to... vma->vm_start, start.
Now the commit_merge() fails, and vmg->start, end are left like this.
This means we return to the rest of vma_modify() with vmg->start, end
(here denoted as start', end') set as:
start' end'
|<-->|
|----------|------|
| vma | next |
|----------|------|
So we now erroneously try to split accordingly. This is where the
unfortunate stuff begins.
We start with:
/* Split any preceding portion of the VMA. */
if (vma->vm_start < vmg->start) {
...
}
This doesn't trigger as we are no longer offset into vma at the start.
But then we invoke:
/* Split any trailing portion of the VMA. */
if (vma->vm_end > vmg->end) {
...
}
Which does get invoked. This leaves us with:
start' end'
|<-->|
|----|-----|------|
| vma| new | next |
|----|-----|------|
We then return ultimately to madvise_walk_vmas(). Here 'new' is unknown,
and putting back the values known in this function we are faced with:
start tmp end
| | |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
Then:
start = tmp;
So:
start end
| |
|----|-----|------|
| vma| new | next |
|----|-----|------|
prev
The following code does not cause anything to happen:
if (prev && start < prev->vm_end)
start = prev->vm_end;
if (start >= end)
break;
And then we invoke:
if (prev)
vma = find_vma(mm, prev->vm_end);
Which is where a problem occurs - we don't know about 'new' so we
essentially look for the vma after prev, which is new, whereas we actually
intended to discover next!
So we end up with:
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
And we have successfully bypassed all of the checks madvise_walk_vmas()
has to ensure early exit should we end up moving out of range.
We loop around, and hit:
/* Here vma->vm_start <= start < (end|vma->vm_end) */
tmp = vma->vm_end;
Oh dear. Now we have:
tmp
start end
| |
|----|-----|------|
|prev| vma | next |
|----|-----|------|
We then invoke:
/* Here vma->vm_start <= start < tmp <= (end|vma->vm_end). */
error = visit(vma, &prev, start, tmp, arg);
Where start == tmp. That is, a zero range. This is not good.
We invoke visit() which is madvise_vma_behavior() which does not check the
range (for good reason, it assumes all checks have been done before it was
called), which in turn finally calls madvise_update_vma().
The madvise_update_vma() function calls vma_modify_flags_name() in turn,
which ultimately invokes vma_modify() with... start == end.
vma_modify() calls vma_merge_existing_range() and finally we hit:
VM_WARN_ON_VMG(start >= end, vmg);
Which triggers, as start == end.
While it might be useful to add some CONFIG_DEBUG_VM asserts in these
instances to catch this kind of error, since we have just eliminated any
possibility of that happening, we will add such asserts separately as to
reduce churn and aid backporting.
Link: https://lkml.kernel.org/r/20250222161952.41957-1-lorenzo.stoakes@oracle.com
Fixes: 2f1c6611b0a8 ("mm: introduce vma_merge_struct and abstract vma_merge(),vma_modify()")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: Brad Spengler <brad.spengler@opensrcsec.com>
Reported-by: syzbot+46423ed8fa1f1148c6e4@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/6774c98f.050a0220.25abdd.0991.GAE@google.com/
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the introduction of commit c77c0a8ac4c52 ("mm/hugetlb: defer freeing
of huge pages if in non-task context"), which supports deferring the
freeing of hugetlb pages, the allocation of contiguous memory through
cma_alloc() may fail probabilistically.
In the CMA allocation process, if it is found that the CMA area is
occupied by in-use hugetlb folios, these in-use hugetlb folios need to be
migrated to another location. When there are no available hugetlb folios
in the free hugetlb pool during the migration of in-use hugetlb folios,
new folios are allocated from the buddy system. A temporary state is set
on the newly allocated folio. Upon completion of the hugetlb folio
migration, the temporary state is transferred from the new folios to the
old folios. Normally, when the old folios with the temporary state are
freed, it is directly released back to the buddy system. However, due to
the deferred freeing of hugetlb pages, the PageBuddy() check fails,
ultimately leading to the failure of cma_alloc().
Here is a simplified call trace illustrating the process:
cma_alloc()
->__alloc_contig_migrate_range() // Migrate in-use hugetlb folios
->unmap_and_move_huge_page()
->folio_putback_hugetlb() // Free old folios
->test_pages_isolated()
->__test_page_isolated_in_pageblock()
->PageBuddy(page) // Check if the page is in buddy
To resolve this issue, we have implemented a function named
wait_for_freed_hugetlb_folios(). This function ensures that the hugetlb
folios are properly released back to the buddy system after their
migration is completed. By invoking wait_for_freed_hugetlb_folios()
before calling PageBuddy(), we ensure that PageBuddy() will succeed.
Link: https://lkml.kernel.org/r/1739936804-18199-1-git-send-email-yangge1116@126.com
Fixes: c77c0a8ac4c5 ("mm/hugetlb: defer freeing of huge pages if in non-task context")
Signed-off-by: Ge Yang <yangge1116@126.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a NULL check on the return value of swp_swap_info in __swap_duplicate
to prevent crashes caused by NULL pointer dereference.
The reason why swp_swap_info() returns NULL is unclear; it may be due
to CPU cache issues or DDR bit flips. The probability of this issue is
very small - it has been observed to occur approximately 1 in 500,000
times per week. The stack info we encountered is as follows:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000058
[RB/E]rb_sreason_str_set: sreason_str set null_pointer
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=00000008a80e5000
[0000000000000058] pgd=0000000000000000, p4d=0000000000000000,
pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Skip md ftrace buffer dump for: 0x1609e0
...
pc : swap_duplicate+0x44/0x164
lr : copy_page_range+0x508/0x1e78
sp : ffffffc0f2a699e0
x29: ffffffc0f2a699e0 x28: ffffff8a5b28d388 x27: ffffff8b06603388
x26: ffffffdf7291fe70 x25: 0000000000000006 x24: 0000000000100073
x23: 00000000002d2d2f x22: 0000000000000008 x21: 0000000000000000
x20: 00000000002d2d2f x19: 18000000002d2d2f x18: ffffffdf726faec0
x17: 0000000000000000 x16: 0010000000000001 x15: 0040000000000001
x14: 0400000000000001 x13: ff7ffffffffffb7f x12: ffeffffffffffbff
x11: ffffff8a5c7e1898 x10: 0000000000000018 x9 : 0000000000000006
x8 : 1800000000000000 x7 : 0000000000000000 x6 : ffffff8057c01f10
x5 : 000000000000a318 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000006daf200000 x1 : 0000000000000001 x0 : 18000000002d2d2f
Call trace:
swap_duplicate+0x44/0x164
copy_page_range+0x508/0x1e78
copy_process+0x1278/0x21cc
kernel_clone+0x90/0x438
__arm64_sys_clone+0x5c/0x8c
invoke_syscall+0x58/0x110
do_el0_svc+0x8c/0xe0
el0_svc+0x38/0x9c
el0t_64_sync_handler+0x44/0xec
el0t_64_sync+0x1a8/0x1ac
Code: 9139c35a 71006f3f 54000568 f8797b55 (f9402ea8)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
The patch seems to only provide a workaround, but there are no more
effective software solutions to handle the bit flips problem. This path
will change the issue from a system crash to a process exception, thereby
reducing the impact on the entire machine.
akpm: this is probably a kernel bug, but this patch keeps the system
running and doesn't reduce that bug's debuggability.
Link: https://lkml.kernel.org/r/e223b0e6ba2f4924984b1917cc717bd5@honor.com
Signed-off-by: gao xu <gaoxu2@honor.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmsan_handle_dma() is used by virtio_ring() which can be built as a
module. kmsan_handle_dma() needs to be exported otherwise building the
virtio_ring fails.
Export kmsan_handle_dma for modules.
Link: https://lkml.kernel.org/r/20250218091411.MMS3wBN9@linutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502150634.qjxwSeJR-lkp@intel.com/
Fixes: 7ade4f10779c ("dma: kmsan: unpoison DMA mappings")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Macro Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix incorrect reference to fault-injection docs
Link: https://lkml.kernel.org/r/20250215105106.734-1-ujwal.kundur@gmail.com
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to
be offlined) add page poison checks in do_migrate_range in order to make
offline hwpoisoned page possible by introducing isolate_lru_page and
try_to_unmap for hwpoisoned page. However folio lock must be held before
calling try_to_unmap. Add it to fix this problem.
Warning will be produced if folio is not locked during unmap:
------------[ cut here ]------------
kernel BUG at ./include/linux/swapops.h:400!
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 UID: 0 PID: 411 Comm: bash Tainted: G W 6.13.0-rc1-00016-g3c434c7ee82a-dirty #41
Tainted: [W]=WARN
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : try_to_unmap_one+0xb08/0xd3c
lr : try_to_unmap_one+0x3dc/0xd3c
Call trace:
try_to_unmap_one+0xb08/0xd3c (P)
try_to_unmap_one+0x3dc/0xd3c (L)
rmap_walk_anon+0xdc/0x1f8
rmap_walk+0x3c/0x58
try_to_unmap+0x88/0x90
unmap_poisoned_folio+0x30/0xa8
do_migrate_range+0x4a0/0x568
offline_pages+0x5a4/0x670
memory_block_action+0x17c/0x374
memory_subsys_offline+0x3c/0x78
device_offline+0xa4/0xd0
state_store+0x8c/0xf0
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x44/0x54
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x3a8/0x4bc
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
Code: f9407be0 b5fff320 d4210000 17ffff97 (d4210000)
---[ end trace 0000000000000000 ]---
Link: https://lkml.kernel.org/r/20250217014329.3610326-4-mawupeng1@huawei.com
Fixes: b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined")
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a folio has an increased reference count, folio_try_get() will acquire
it, perform necessary operations, and then release it. In the case of a
poisoned folio without an elevated reference count (which is unlikely for
memory-failure), folio_try_get() will simply bypass it.
Therefore, relocate the folio_try_get() function, responsible for checking
and acquiring this reference count at first.
Link: https://lkml.kernel.org/r/20250217014329.3610326-3-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: memory_failure: unmap poisoned folio during migrate
properly", v3.
Fix two bugs during folio migration if the folio is poisoned.
This patch (of 3):
Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to
TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in
order to stop send SIGBUS signal when accessing an error page after a
memory error on a clean folio. However during page migration, anon folio
must be set with TTU_HWPOISON during unmap_*(). For pagecache we need
some policy just like the one in hwpoison_user_mappings to set this flag.
So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to
handle this warning properly.
Warning will be produced during unamp poison folio with the following log:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c
Modules linked in:
CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42
Tainted: [W]=WARN
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : try_to_unmap_one+0x8fc/0xd3c
lr : try_to_unmap_one+0x3dc/0xd3c
Call trace:
try_to_unmap_one+0x8fc/0xd3c (P)
try_to_unmap_one+0x3dc/0xd3c (L)
rmap_walk_anon+0xdc/0x1f8
rmap_walk+0x3c/0x58
try_to_unmap+0x88/0x90
unmap_poisoned_folio+0x30/0xa8
do_migrate_range+0x4a0/0x568
offline_pages+0x5a4/0x670
memory_block_action+0x17c/0x374
memory_subsys_offline+0x3c/0x78
device_offline+0xa4/0xd0
state_store+0x8c/0xf0
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x44/0x54
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x3a8/0x4bc
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
[mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe]
Link: https://lkml.kernel.org/r/20250219060653.3849083-1-mawupeng1@huawei.com
Link: https://lkml.kernel.org/r/20250217014329.3610326-1-mawupeng1@huawei.com
Link: https://lkml.kernel.org/r/20250217014329.3610326-2-mawupeng1@huawei.com
Fixes: 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON")
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ma Wupeng <mawupeng1@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When update_mmu_cache_range() is called by update_mmu_cache(), the vmf
parameter is NULL, which will cause a NULL pointer dereference issue in
adjust_pte():
Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read
Hardware name: Atmel AT91SAM9
PC is at update_mmu_cache_range+0x1e0/0x278
LR is at pte_offset_map_rw_nolock+0x18/0x2c
Call trace:
update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec
remove_migration_pte from rmap_walk_file+0xcc/0x130
rmap_walk_file from remove_migration_ptes+0x90/0xa4
remove_migration_ptes from migrate_pages_batch+0x6d4/0x858
migrate_pages_batch from migrate_pages+0x188/0x488
migrate_pages from compact_zone+0x56c/0x954
compact_zone from compact_node+0x90/0xf0
compact_node from kcompactd+0x1d4/0x204
kcompactd from kthread+0x120/0x12c
kthread from ret_from_fork+0x14/0x38
Exception stack(0xc0d8bfb0 to 0xc0d8bff8)
To fix it, do not rely on whether 'ptl' is equal to decide whether to hold
the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is
enabled. In addition, if two vmas map to the same PTE page, there is no
need to hold the pte lock again, otherwise a deadlock will occur. Just
add the need_lock parameter to let adjust_pte() know this information.
Link: https://lkml.kernel.org/r/20250217024924.57996-1-zhengqi.arch@bytedance.com
Fixes: fc9c45b71f43 ("arm: adjust_pte() use pte_offset_map_rw_nolock()")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Closes: https://lore.kernel.org/lkml/CAM1KZSmZ2T_riHvay+7cKEFxoPgeVpHkVFTzVVEQ1BO0cLkHEQ@mail.gmail.com/
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Russel King <linux@armlinux.org.uk>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add check for the return value of __pgd_alloc() in pgd_alloc() to prevent
null pointer dereference.
Link: https://lkml.kernel.org/r/20250217160017.2375536-1-haoxiang_li2024@163.com
Fixes: a9b3c355c2e6 ("asm-generic: pgalloc: provide generic __pgd_{alloc,free}")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Sam Creasey <sammy@sammy.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
further reduced
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes: f1c07c0a1662 ("selftests/damon: add a test for DAMOS quota goal")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171423.b28a918d-lkp@intel.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [6.10.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit a5c6bc590094a1a73cf6fa3f505e1945d2bf2461.
The general approach described in commit e076eaca5906 ("selftests: break
the dependency upon local header files") was taken one step too far here:
it should not have been extended to include the syscall numbers. This is
because doing so would require per-arch support in tools/include/uapi, and
no such support exists.
This revert fixes two separate reports of test failures, from Dave
Hansen[1], and Li Wang[2]. An excerpt of Dave's report:
Before this commit (a5c6bc590094a1a73cf6fa3f505e1945d2bf2461) things are
fine. But after, I get:
running PKEY tests for unsupported CPU/OS
An excerpt of Li's report:
I just found that mlock2_() return a wrong value in mlock2-test
[1] https://lore.kernel.org/dc585017-6740-4cab-a536-b12b37a7582d@intel.com
[2] https://lore.kernel.org/CAEemH2eW=UMu9+turT2jRie7+6ewUazXmA6kL+VBo3cGDGU6RA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250214033850.235171-1-jhubbard@nvidia.com
Fixes: a5c6bc590094 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Li Wang <liwang@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After blamed commit rtm_to_fib_config() now calls
lwtunnel_valid_encap_type{_attr}() without RTNL held,
triggering an unlock balance in __rtnl_unlock,
as reported by syzbot [1]
IPv6 and rtm_to_nh_config() are not yet converted.
Add a temporary @rtnl_is_held parameter to lwtunnel_valid_encap_type()
and lwtunnel_valid_encap_type_attr().
While we are at it replace the two rcu_dereference()
in lwtunnel_valid_encap_type() with more appropriate
rcu_access_pointer().
[1]
syz-executor245/5836 is trying to release lock (rtnl_mutex) at:
[<ffffffff89d0e38c>] __rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor245/5836.
stack backtrace:
CPU: 0 UID: 0 PID: 5836 Comm: syz-executor245 Not tainted 6.14.0-rc4-syzkaller-00873-g3424291dd242 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_unlock_imbalance_bug+0x25b/0x2d0 kernel/locking/lockdep.c:5289
__lock_release kernel/locking/lockdep.c:5518 [inline]
lock_release+0x47e/0xa30 kernel/locking/lockdep.c:5872
__mutex_unlock_slowpath+0xec/0x800 kernel/locking/mutex.c:891
__rtnl_unlock+0x6c/0xf0 net/core/rtnetlink.c:142
lwtunnel_valid_encap_type+0x38a/0x5f0 net/core/lwtunnel.c:169
lwtunnel_valid_encap_type_attr+0x113/0x270 net/core/lwtunnel.c:209
rtm_to_fib_config+0x949/0x14e0 net/ipv4/fib_frontend.c:808
inet_rtm_newroute+0xf6/0x2a0 net/ipv4/fib_frontend.c:917
rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6919
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:709 [inline]
Fixes: 1dd2af7963e9 ("ipv4: fib: Convert RTM_NEWROUTE and RTM_DELROUTE to per-netns RTNL.")
Reported-by: syzbot+3f18ef0f7df107a3f6a0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67c6f87a.050a0220.38b91b.0147.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250304125918.2763514-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On MMIO devices (e.g. MT7988 or EN7581) unicast traffic received on lanX
port is flooded on all other user ports if the DSA switch is configured
without VLAN support since PORT_MATRIX in PCR regs contains all user
ports. Similar to MDIO devices (e.g. MT7530 and MT7531) fix the issue
defining default VLAN-ID 0 for MT7530 MMIO devices.
Fixes: 110c18bfed414 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/20250304-mt7988-flooding-fix-v1-1-905523ae83e9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiner Kallweit says:
====================
net: phy: move PHY package code to its own source file
This series contributes to cleaning up phylib by moving PHY package
related code to its own source file.
====================
Link: https://patch.msgid.link/5c5e60b3-0378-4960-8cf0-07ce0e219c68@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move definition of struct phy_package_shared to phy_package.c, and
move remaining PHY package related declarations from phy.h to
phylib.h, thus making them accessible for PHY drivers only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/211e14b6-e2f8-43d7-b533-3628ec548456@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move PHY package related inline functions from phy.h to phy_package.c.
While doing so remove locked versions phy_package_read() and
phy_package_write() which have no user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/a4518379-7a5d-45f3-831c-b7fde6512c65@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new getters for members of struct phy_package_shared.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/61ee43ec-be20-4be1-bfad-d18d2a4fae2b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new getters for members of struct phy_package_shared.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/356a257f-68d0-47bc-a474-4dafaeaa149f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new getters for members of struct phy_package_shared.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/18e5d29e-fb96-4771-92e4-689e0c992177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the new getters for members of struct phy_package_shared.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/b6402789-45d2-49d6-835f-ed584bce5b2f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add getters for public members, this prepares for making struct
phy_package_shared private to phylib. Declare the getters in a new header
file phylib.h, which will be used by PHY drivers only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c6da0b27-4479-4717-9e16-643821b76bd8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is the first step in moving the PHY package related code
to its own source file. No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/57df5c19-fbcd-45a7-9afd-cd4f74d7fa76@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'enable-sgmii-and-2500basex-interface-mode-switching-for-intel-platforms'
Choong Yong Liang says:
====================
Enable SGMII and 2500BASEX interface mode switching for Intel platforms
During the interface mode change, the 'phylink_major_config' function will
be triggered in phylink. The modification of the following functions will
support the switching between SGMII and 2500BASE-X interface modes for
the Intel platform:
- xpcs_switch_interface_mode: Re-initiates clause 37 auto-negotiation for
the SGMII interface mode to perform auto-negotiation.
- mac_finish: Configures the SerDes according to the interface mode.
With the above changes, the code will work as follows during the interface
mode change. The PCS will reconfigure according to the pcs_neg_mode and the
selected interface mode. Then, the MAC driver will perform SerDes
configuration in 'mac_finish' based on the selected interface mode. During
the SerDes configuration, the selected interface mode will identify TSN
lane registers from FIA and then send IPC commands to the Power Management
Controller (PMC) through the PMC driver/API. The PMC will act as a proxy to
program the PLL registers.
====================
Link: https://patch.msgid.link/20250227121522.1802832-1-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The intel_config_serdes function was provided to handle interface mode
changes for the ADL-N platform.
The Modphy register lane was provided to configure the serdes when
changing interface modes.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-7-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Intel platform will configure the SerDes through PMC API based on the
provided interface mode.
This patch adds several new functions below:-
- intel_tsn_lane_is_available(): This new function reads FIA lane
ownership registers and common lane registers through IPC commands
to know which lane the mGbE port is assigned to.
- intel_mac_finish(): To configure the SerDes based on the assigned
lane and latest interface mode, it sends IPC command to the PMC through
PMC driver/API. The PMC acts as a proxy for R/W on behalf of the driver.
- intel_set_reg_access(): Set the register access to the available TSN
interface.
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-6-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SerDes will configure according to the provided interface mode after
finish a major reconfiguration of the interface mode.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-5-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Exports intel_pmc_ipc() for host access to the PMC IPC mailbox
- Enables the host to access specific SoC registers through the PMC
firmware using IPC commands. This access method is necessary for
registers that are not available through direct Memory-Mapped I/O (MMIO),
which is used for other accessible parts of the PMC.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Chao Qin <chao.qin@intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-4-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The xpcs_switch_interface_mode function was introduced to handle
interface switching.
According to the XPCS datasheet, a soft reset is required to initiate
Clause 37 auto-negotiation when the XPCS switches interface modes.
When the interface mode switches from 2500BASE-X to SGMII,
re-initiating Clause 37 auto-negotiation is required for the SGMII
interface mode to function properly.
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-3-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The phylink_expects_phy() function allows MAC drivers to check if they are
expecting a PHY to attach. The checking condition in phylink_expects_phy()
aims to achieve the same result as the checking condition in
phylink_attach_phy().
However, the checking condition in phylink_expects_phy() uses
pl->link_config.interface, while phylink_attach_phy() uses
pl->link_interface.
Initially, both pl->link_interface and pl->link_config.interface are set
to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND.
When the interface switches from SGMII to 2500BASE-X,
pl->link_config.interface is updated by phylink_major_config().
At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and
pl->link_config.interface is set to 2500BASE-X.
Subsequently, when the STMMAC interface is taken down
administratively and brought back up, it is blocked by
phylink_expects_phy().
Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the
same result, phylink_expects_phy() should check pl->link_interface,
which never changes, instead of pl->link_config.interface, which is
updated by phylink_major_config().
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-2-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
around
nf_conncount is supposed to skip garbage collection if it has already
run garbage collection in the same jiffy. Unfortunately, this is broken
when jiffies wrap around which this patch fixes.
The problem is that last_gc in the nf_conncount_list struct is an u32,
but jiffies is an unsigned long which is 8 bytes on my systems. When
those two are compared it only works until last_gc wraps around.
See bug report: https://bugzilla.netfilter.org/show_bug.cgi?id=1778
for more details.
Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC")
Signed-off-by: Nicklas Bo Jensen <njensen@akamai.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The IOPOLL path posts CQEs when the io_kiocb is marked as completed,
so it cannot rely on the usual retry that non-IOPOLL requests do for
read/write requests.
If -EAGAIN is received and the request should be retried, go through
the normal completion path and let the normal flush logic catch it and
reissue it, like what is done for !IOPOLL reads or writes.
Fixes: d803d123948f ("io_uring/rw: handle -EAGAIN retry at IO completion time")
Reported-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/io-uring/2b43ccfa-644d-4a09-8f8f-39ad71810f41@oracle.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If userptr pages are freed after a call to the xe mmu notifier,
the device will not be blocked out from theoretically accessing
these pages unless they are also unmapped from the iommu, and
this violates some aspects of the iommu-imposed security.
Ensure that userptrs are unmapped in the mmu notifier to
mitigate this. A naive attempt would try to free the sg table, but
the sg table itself may be accessed by a concurrent bind
operation, so settle for only unmapping.
v3:
- Update lockdep asserts.
- Fix a typo (Matthew Auld)
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit ba767b9d01a2c552d76cf6f46b125d50ec4147a6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The pnfs that we obtain from hmm_range_fault() point to pages that
we don't have a reference on, and the guarantee that they are still
in the cpu page-tables is that the notifier lock must be held and the
notifier seqno is still valid.
So while building the sg table and marking the pages accesses / dirty
we need to hold this lock with a validated seqno.
However, the lock is reclaim tainted which makes
sg_alloc_table_from_pages_segment() unusable, since it internally
allocates memory.
Instead build the sg-table manually. For the non-iommu case
this might lead to fewer coalesces, but if that's a problem it can
be fixed up later in the resource cursor code. For the iommu case,
the whole sg-table may still be coalesced to a single contigous
device va region.
This avoids marking pages that we don't own dirty and accessed, and
it also avoid dereferencing struct pages that we don't own.
v2:
- Use assert to check whether hmm pfns are valid (Matthew Auld)
- Take into account that large pages may cross range boundaries
(Matthew Auld)
v3:
- Don't unnecessarily check for a non-freed sg-table. (Matthew Auld)
- Add a missing up_read() in an error path. (Matthew Auld)
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add proper #ifndef around the xe_hmm.h header, proper spacing
and since the documentation mostly follows kerneldoc format,
make it kerneldoc. Also prepare for upcoming -stable fixes.
Fixes: 81e058a3e7fd ("drm/xe: Introduce helper to populate userptr")
Cc: Oak Zeng <oak.zeng@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250304173342.22009-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit bbe2b06b55bc061c8fcec034ed26e88287f39143)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Concurrent VM bind staging and zapping of PTEs from a userptr notifier
do not work because the view of PTEs is not stable. VM binds cannot
acquire the notifier lock during staging, as memory allocations are
required. To resolve this race condition, use a staging tree for VM
binds that is committed only under the userptr notifier lock during the
final step of the bind. This ensures a consistent view of the PTEs in
the userptr notifier.
A follow up may only use staging for VM in fault mode as this is the
only mode in which the above race exists.
v3:
- Drop zap PTE change (Thomas)
- s/xe_pt_entry/xe_pt_entry_staging (Thomas)
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org>
Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job")
Fixes: a708f6501c69 ("drm/xe: Update PT layer with better error handling")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit 6f39b0c5ef0385eae586760d10b9767168037aa5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix fault mode invalidation racing with unbind leading to the
PTE zapping potentially traversing an invalid page-table tree.
Do this by holding the notifier lock across PTE zapping. This
might transfer any contention waiting on the notifier seqlock
read side to the notifier lock read side, but that shouldn't be
a major problem.
At the same time get rid of the open-coded invalidation in the bind
code by relying on the notifier even when the vma bind is not
yet committed.
Finally let userptr invalidation call a dedicated xe_vm function
performing a full invalidation.
Fixes: e8babb280b5e ("drm/xe: Convert multiple bind ops into single job")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 100a5b8dadfca50d91d9a4c9fc01431b42a25cab)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix a (harmless) misplaced #endif leading to declarations
appearing multiple times.
Fixes: 0eb2a18a8fad ("drm/xe: Implement VM snapshot support for BO's and userptr")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit fcc20a4c752214b3e25632021c57d7d1d71ee1dd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If a userptr vma subject to prefetching was already invalidated
or invalidated during the prefetch operation, the operation would
repeatedly return -EAGAIN which would typically cause an infinite
loop.
Validate the userptr to ensure this doesn't happen.
v2:
- Don't fallthrough from UNMAP to PREFETCH (Matthew Brost)
Fixes: 5bd24e78829a ("drm/xe/vm: Subclass userptr vmas")
Fixes: 617eebb9c480 ("drm/xe: Fix array of binds")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228073058.59510-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 03c346d4d0d85d210d549d43c8cfb3dfb7f20e0a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
CS35L41 HDA
Laptop uses 2 CS35L41 Amps with HDA, using External boost with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-8-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS B5605CCA and B5405CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-7-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS B3405CCA / P3405CCA, B3605CCA / P3605CCA,
B3405CCA, B3605CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-6-sbinding@opensource.cirrus.com
|
|
Add support for ASUS B3405CVA, B5405CVA, B5605CVA, B3605CVA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-5-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G614PH/PM/PP and G614FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-4-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS GA603KP, GA603KM and GA603KH.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-3-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G814PH/PM/PP and G814FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-2-sbinding@opensource.cirrus.com
|
|
The kernel_recvmsg() function returns an int which could be either
negative error codes or the number of bytes received. The problem is
that the condition:
if (ret < sizeof(*icresp)) {
is type promoted to type unsigned long and negative values are treated
as high positive values which is success, when they should be treated as
failure. Handle invalid positive returns separately from negative
error codes to avoid this problem.
Fixes: 578539e09690 ("nvme-tcp: fix connect failure on receiving partial ICResp PDU")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- power management fix in intel-thc-hid (Even Xu)
- nintendo gencon mapping fix (Ryan McClelland)
- fix for UAF on device diconnect path in hid-steam (Vicki Pfau)
- two fixes for UAF on device disconnect path in intel-ish-hid (Zhang
Lixu)
- fix for potential NULL dereference in hid-appleir (Daniil Dulov)
- few other small cosmetic fixes (e.g. typos)
* tag 'hid-for-linus-2025030501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Intel-thc-hid: Intel-quickspi: Correct device state after S4
HID: intel-thc-hid: Fix spelling mistake "intput" -> "input"
HID: hid-steam: Fix use-after-free when detaching device
HID: debug: Fix spelling mistake "Messanger" -> "Messenger"
HID: appleir: Fix potential NULL dereference at raw event handle
HID: apple: disable Fn key handling on the Omoton KB066
HID: i2c-hid: improve i2c_hid_get_report error message
HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove()
HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove()
HID: google: fix unused variable warning under !CONFIG_ACPI
HID: nintendo: fix gencon button events map
HID: corsair-void: Update power supply values with a unified work handler
|
|
While looking for incorrect users of the pipe head/tail fields (see
commit c27c66afc449: "fs/pipe: Fix pipe_occupancy() with 16-bit
indexes"), I found a bug in pipe_discard_from() that looked entirely
broken.
However, the fix is trivial: this buggy function isn't actually called
by anything, so let's just remove it ASAP.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
always allow ih interrupt from fw on smu v14 based on
the interface requirement
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3199eba46c54324193607d9114a1e321292d7a1)
Cc: stable@vger.kernel.org # 6.12.x
|
