| Age | Commit message (Collapse) | Author |
|---|
|
While there is no good explanation what this value does, vendor driver
uses value 31 for it. Align driver with it.
Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
According to user manual, reset line should be deasserted before clocks
are enabled. Also fix power down sequence to be reverse of that.
Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Currently coefficients are applied only once, since they don't change.
However, this is done before enable bit is set and thus it doesn't get
applied properly.
Fix that by applying coefficients after enable bit is set. While this
means that it will be done evey time, it doesn't bring much time
penalty.
Fixes: a4260ea49547 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
bit_size field holds size of slice, not slice + header. Because of HW
quirks, driver can't program in just slice, but also preceding header.
But that means that currently used bit_size is wrong (too small).
Instead, just use size of whole buffer. There is no harm in doing this.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:569:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:583:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:599:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:613:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:633:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:647:2-3: Unneeded semicolon
./drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c:683:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7632
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0145 Rev.1.45) we need to supply all
the clocks and then release the CRU resets. Currently we are releasing
the resets and then supplying the clocks. So, fix the start reception
procedure.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240213181233.242316-6-biju.das.jz@bp.renesas.com
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0145 Rev.1.45) we need to disable the
vclk before enabling the LINK reception and enable the vclk after enabling
the link Reception. So restructure vclk handling as per the HW manual.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240213181233.242316-5-biju.das.jz@bp.renesas.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0140 Rev.1.40) it is mentioned that
initialize the AXI master first and then initialize the image processing.
Fix the start procedure as per the hardware manual.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-4-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As per section 35.3.1 Starting Reception for the MIPI CSI-2 Input on the
latest hardware manual (R01UH0914EJ0140 Rev.1.40) it is mentioned that
after DPHY reset, we need to wait for 1 msec or more before start
receiving data from the sensor. So add a delay after pre_streamon().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-3-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Replace the old SET_RUNTIME_PM_OPS() helpers with its modern alternative
RUNTIME_PM_OPS(). The usage of pm_ptr and RUNTIME_PM_OPS() allows the
compiler to see where it's used but still drop the dead code. After this
we can get rid of the unnecessary '__maybe_unused' annotations on PM
functions.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240213181233.242316-2-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed
in several error-handling paths. However, *pdvbdev is not set to NULL
after dvbdev's deallocation, causing use-after-frees in many places,
for example, in the following call chain:
budget_register
|-> dvb_dmxdev_init
|-> dvb_register_device
|-> dvb_dmxdev_release
|-> dvb_unregister_device
|-> dvb_remove_device
|-> dvb_device_put
|-> kref_put
When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in
dvb_register_device) could point to memory that had been freed in
dvb_register_device. Thereafter, this pointer is transferred to
kref_put and triggering a use-after-free.
Link: https://lore.kernel.org/linux-media/20240203134046.3120099-1-alexious@zju.edu.cn
Fixes: b61901024776 ("V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations struct")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the new index file and links to it.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-2-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the function calls defined in
video.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-7-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the data types defined in
video.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-6-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the function calls defined in
audio.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-5-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the data types defined in
audio.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-4-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of osd.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-3-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The variable ret is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so ret can be
removed. Also add spaces after , to clean up checkpatch warnings.
Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the
enclosing expression, the value is never actually read from
'ret' [deadcode.DeadStores]
Link: https://lore.kernel.org/linux-media/20240116115002.2265367-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Link: https://lore.kernel.org/linux-media/920639b9e05775eea56ecb9cd5ed38ad292a96a8.1705008803.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix the following errors reported by checkpatch:
ERROR: "foo* bar" should be "foo *bar"
ERROR: spaces required around that '=' (ctx:VxV)
ERROR: space required after that ',' (ctx:VxV)
Link: https://lore.kernel.org/linux-media/20240111105856.14655-1-chenxb_99091@126.com
Signed-off-by: XueBing Chen <chenxb_99091@126.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
At several positions in dvb_frontend.c, memdup_user() is utilized to
copy userspace arrays. This is done without overflow checks.
Use the new wrapper memdup_array_user() to copy the arrays more safely.
Link: https://lore.kernel.org/linux-media/20231102191633.52592-2-pstanner@redhat.com
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Because video duration involves calculating the streaming time, and i2c
communication incurs too many XTALK register settings every 4 bytes with
i2c START and STOP.
So we have opted switch to the i2c burst method.
This method involves writing the XTALK registers in the order of
the register block.
The start streaming time can be reduced from around 400ms to 150ms
[Sakari Ailus: Drop unneeded dev_dbg().]
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This reverts commit feb8831be9d468ee961289c6a275536a1ee0011c.
Commit feb8831be9d468ee961289c6a275536a1ee0011c contained unintentional
changes to Documentation/devicetree/bindings/media/video-interfaces.yaml
and arch/arm/boot/dts/ti/omap/omap3-n9.dts. Revert the entire patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
gcc-11 seems to believe that the coeffs variable can be used
uninitialized. Refactor the code and remove the cscen variable to
convince gcc that we are doing a good job.
drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:218:20: warning: 'coeffs' may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240128-gcc-11-warnings-v1-1-52bbdf492049@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
All the sink pads of the crossbar switch require an active link if
they're part of the pipeline. Mark them with the
MEDIA_PAD_FL_MUST_CONNECT flag to fail pipeline validation if they're
not connected. This allows removing a manual check when translating
streams.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The MEDIA_PAD_FL_MUST_CONNECT flag indicates that the pad requires an
enabled link to stream, but only if it has any link at all. This makes
little sense, as if a pad is part of a pipeline, there are very few use
cases for an active link to be mandatory only if links exist at all. A
review of in-tree drivers confirms they all need an enabled link for
pads marked with the MEDIA_PAD_FL_MUST_CONNECT flag.
Expand the scope of the flag by rejecting pads that have no links at
all. This requires modifying the pipeline build code to add those pads
to the pipeline.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The pad local variable in the media_pipeline_explore_next_link()
function is used to store the pad through which the entity has been
reached. Rename it to origin to reflect that and make the code easier to
read. This will be even more important in subsequent commits when
expanding the function with additional logic.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Maintain a counter of the links connected to a pad in the media_pad
structure. This helps checking if a pad is connected to anything, which
will be used in the pipeline building code.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When translating source to sink streams in the crossbar subdev, the
driver tries to locate the remote subdev connected to the sink pad. The
remote pad may be NULL, if userspace tries to enable a stream that ends
at an unconnected crossbar sink. When that occurs, the driver
dereferences the NULL pad, leading to a crash.
Prevent the crash by checking if the pad is NULL before using it, and
return an error if it is.
Cc: stable@vger.kernel.org # 6.1
Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20231201150614.63300-1-marex@denx.de
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The media_create_pad_link() function doesn't correctly clear reject link
type flags, nor does it set the DATA_LINK flag. It only works because
the MEDIA_LNK_FL_DATA_LINK flag's value is 0.
Fix it by returning an error if any link type flag is set. This doesn't
introduce any regression, as nobody calls the media_create_pad_link()
function with link type flags (easily checked by grepping for the flag
in the source code, there are very few hits).
Set the MEDIA_LNK_FL_DATA_LINK explicitly, which is a no-op that the
compiler will optimize out, but is still useful to make the code more
explicit and easier to understand.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When building pipelines by following links, the
media_pipeline_explore_next_link() function only traverses enabled
links. The remote pad of a disabled link is not added to the pipeline,
and neither is the local pad. While the former is correct as disabled
links should not be followed, not adding the local pad breaks processing
of the MEDIA_PAD_FL_MUST_CONNECT flag.
The MEDIA_PAD_FL_MUST_CONNECT flag is checked in the
__media_pipeline_start() function that iterates over all pads after
populating the pipeline. If the pad is not present, the check gets
skipped, rendering it useless.
Fix this by adding the local pad of all links regardless of their state,
only skipping the remote pad for disabled links.
Cc: stable@vger.kernel.org # 6.1
Fixes: ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()")
Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Closes: https://lore.kernel.org/linux-media/7658a15a-80c5-219f-2477-2a94ba6c6ba1@kontron.de
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the media_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the cec_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Correct the default value of node_type vivid parameter to 0xe1d3d.
Signed-off-by: Dorcas Anono Litunya <anonolitunya@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The port@0 node doesn't define any extra properties in the port or endpoint
nodes, so the $ref should be to "/properties/port" instead as it restricts
extra properties.
Fixes: 0f82ffa9a295 ("media: dt-bindings: media: i2c: Add bindings for TW9900")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Check the size of another pointer instead of NULL. This fixes this
smatch warning:
drivers/staging/media/atomisp/pci/sh_css.c:3609 ia_css_pipe_enqueue_buffer() warn: sizeof(NUMBER)?
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This fixes a sparse warning:
drivers/staging/media/atomisp/pci/atomisp_drvfs.c:40:14: warning: symbol 'dbgopt' was not declared. Should it be static?
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Building the kerneldoc resulted in two errors:
Documentation/media/driver-api/v4l2-common:6: ./include/media/v4l2-common.h:566: ERROR: Unexpected indentation.
Documentation/media/driver-api/v4l2-common:6: ./include/media/v4l2-common.h:567: WARNING: Block quote ends without a blank line; unexpected unindent.
Format v4l2_link_freq_to_bitmap according to the kerneldoc standard.
The v4l2_fill_pixfmt_mp function also had incorrect return value
formatting, although that didn't report an error/warning, but it looked
ugly in the generated documentation. So fix that one as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: a68e88e2cf9e ("media: v4l: Add a helper for setting up link-frequencies control")
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity
but isn't freed in its following error-handling paths. This patch
adds such deallocation to prevent memleak of entity->name.
Fixes: be2fff656322 ("media: add helpers for memory-to-memory media controller")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In tpg_alloc, resources should be deallocated in each and every
error-handling paths, since they are allocated in for statements.
Otherwise there would be memleaks because tpg_free is called only when
tpg_alloc return 0.
Fixes: 63881df94d3e ("[media] vivid: add the Test Pattern Generator")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add device tree schema entry for Samsung MFC.
Signed-off-by: Aakarsh Jain <aakarsh.jain@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove documentation from missing field.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove kerneldoc from missing fields.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove doc from missing fields.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove doc from missing fields.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove doc for missing field.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The field is not part of the structure. Remove the doc.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Those fields have been removed. They do not need to be documented.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The field is gone, remove the documentation for it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The field is gone, remove the documentation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
