summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-08-12ALSA: hda/realtek: Add support for new HP G12 laptopsSimon Trimmer
Some of these laptop models have quirk IDs that are identical but have different amplifier parts fitted, this difference is described in the ACPI information. The solution introduced for this product family can derive the required component binding information from ACPI instead of hardcoding it, supports the new variants of the CS35L56 being used and has generalized naming that makes it applicable to other ALC+amp combinations. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20240802152215.20831-4-rf@opensource.cirrus.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-12Merge tag 'spi-acpi-lookup-dummy' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into topic/cirrus-hp-g12 spi: Add empty versions of ACPI lookup functions A patch from Richard Fitzgerald adding dummy versions of the ACPI lookup functions for SPI: Provide empty versions of acpi_spi_count_resources(), acpi_spi_device_alloc() and acpi_spi_find_controller_by_adev() if the real functions are not being built. This commit fixes two problems with the original definitions: 1) There wasn't an empty version of these functions 2) The #if only depended on CONFIG_ACPI. But the functions are implemented in the core spi.c so CONFIG_SPI_MASTER must also be enabled for the real functions to exist.
2024-08-11Linux 6.11-rc3v6.11-rc3Linus Torvalds
2024-08-11Merge tag 'x86-urgent-2024-08-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Fix 32-bit PTI for real. pti_clone_entry_text() is called twice, once before initcalls so that initcalls can use the user-mode helper and then again after text is set read only. Setting read only on 32-bit might break up the PMD mapping, which makes the second invocation of pti_clone_entry_text() find the mappings out of sync and failing. Allow the second call to split the existing PMDs in the user mapping and synchronize with the kernel mapping. - Don't make acpi_mp_wake_mailbox read-only after init as the mail box must be writable in the case that CPU hotplug operations happen after boot. Otherwise the attempt to start a CPU crashes with a write to read only memory. - Add a missing sanity check in mtrr_save_state() to ensure that the fixed MTRR MSRs are supported. Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but the WARN_ON() can bring systems down when panic on warn is set. * tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mtrr: Check if fixed MTRRs exist before saving them x86/paravirt: Fix incorrect virt spinlock setting on bare metal x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox x86/mm: Fix PTI for i386 some more
2024-08-11Merge tag 'timers-urgent-2024-08-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull time keeping fixes from Thomas Gleixner: - Fix a couple of issues in the NTP code where user supplied values are neither sanity checked nor clamped to the operating range. This results in integer overflows and eventualy NTP getting out of sync. According to the history the sanity checks had been removed in favor of clamping the values, but the clamping never worked correctly under all circumstances. The NTP people asked to not bring the sanity checks back as it might break existing applications. Make the clamping work correctly and add it where it's missing - If adjtimex() sets the clock it has to trigger the hrtimer subsystem so it can adjust and if the clock was set into the future expire timers if needed. The caller should provide a bitmask to tell hrtimers which clocks have been adjusted. adjtimex() uses not the proper constant and uses CLOCK_REALTIME instead, which is 0. So hrtimers adjusts only the clocks, but does not check for expired timers, which might make them expire really late. Use the proper bitmask constant instead. * tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex() ntp: Safeguard against time_constant overflow ntp: Clamp maxerror and esterror to operating range
2024-08-11Merge tag 'irq-urgent-2024-08-11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three small fixes for interrupt core and drivers: - The interrupt core fails to honor caller supplied affinity hints for non-managed interrupts and uses the system default affinity on startup instead. Set the missing flag in the descriptor to tell the core to use the provided affinity. - Fix a shift out of bounds error in the Xilinx driver - Handle switching to level trigger correctly in the RISCV APLIC driver. It failed to retrigger the interrupt which causes it to become stale" * tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration irqchip/xilinx: Fix shift out of bounds genirq/irqdesc: Honor caller provided affinity in alloc_desc()
2024-08-11Merge tag 'usb-6.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for reported issues for 6.11-rc3. Included in here are: - usb serial driver MODULE_DESCRIPTION() updates - usb serial driver fixes - typec driver fixes - usb-ip driver fix - gadget driver fixes - dt binding update All of these have been in linux-next with no reported issues" * tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common() usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt() usb: gadget: f_fs: restore ffs_func_disable() functionality USB: serial: debug: do not echo input by default usb: typec: tipd: Delete extra semi-colon usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch() usb: gadget: u_serial: Set start_delayed during suspend usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap() usb: typec: fsa4480: Check if the chip is really there usb: gadget: core: Check for unset descriptor usb: vhci-hcd: Do not drop references before new references are gained usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed. usb: gadget: midi2: Fix the response for FB info with block 0xff dt-bindings: usb: microchip,usb2514: Add USB2517 compatible USB: serial: garmin_gps: use struct_size() to allocate pkt USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by USB: serial: add missing MODULE_DESCRIPTION() macros USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
2024-08-11Merge tag 'tty-6.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for reported problems for 6.11-rc3. Included in here are: - sc16is7xx serial driver fixes - uartclk bugfix for a divide by zero issue - conmakehash userspace build issue fix All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: vt: conmakehash: cope with abs_srctree no longer in env serial: sc16is7xx: fix invalid FIFO access with special register set serial: sc16is7xx: fix TX fifo corruption serial: core: check uartclk for zero to avoid divide by zero
2024-08-11Merge tag 'driver-core-6.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / documentation fixes from Greg KH: "Here are some small fixes, and some documentation updates for 6.11-rc3. Included in here are: - embargoed hardware documenation updates based on a lot of review by legal-types in lots of companies to try to make the process a _bit_ easier for us to manage over time. - rust firmware documentation fix - driver detach race fix for the fix that went into 6.11-rc1 All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Fix uevent_show() vs driver detach race Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes rust: firmware: fix invalid rustdoc link
2024-08-11Merge tag 'char-misc-6.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small char/misc/other driver fixes for 6.11-rc3 for reported issues. Included in here are: - binder driver fixes - fsi MODULE_DESCRIPTION() additions (people seem to love them...) - eeprom driver fix - Kconfig dependency fix to resolve build issues - spmi driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: spmi: pmic-arb: add missing newline in dev_err format strings spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree binder_alloc: Fix sleeping function called from invalid context binder: fix descriptor lookup for context manager char: add missing NetWinder MODULE_DESCRIPTION() macros misc: mrvl-cn10k-dpi: add PCI_IOV dependency eeprom: ee1004: Fix locking issues in ee1004_probe() fsi: add missing MODULE_DESCRIPTION() macros
2024-08-11Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two core fixes: one to prevent discard type changes (seen on iSCSI) during intermittent errors and the other is fixing a lockdep problem caused by the queue limits change. And one driver fix in ufs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Keep the discard mode stable scsi: sd: Move sd_read_cpr() out of the q->limits_lock region scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
2024-08-11ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7Parsa Poorshikhian
Fix noise from speakers connected to AUX port when no sound is playing. The problem occurs because the `alc_shutup_pins` function includes a 0x10ec0257 vendor ID, which causes noise on Lenovo IdeaPad 3 15IAU7 with Realtek ALC257 codec when no sound is playing. Removing this vendor ID from the function fixes the bug. Fixes: 70794b9563fe ("ALSA: hda/realtek: Add more codec ID to no shutup pins list") Signed-off-by: Parsa Poorshikhian <parsa.poorsh@gmail.com> Link: https://patch.msgid.link/20240810150939.330693-1-parsa.poorsh@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-11Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-qDavid S. Miller
ueue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-07 (igc) This series contains updates to igc driver only. Faizal adjusts the size of the MAC internal buffer on i226 devices to resolve an errata for leaking packet transmits. He also corrects a condition in which qbv_config_change_errors are incorrectly counted. Lastly, he adjusts the conditions for resetting the adapter when changing TSN Tx mode and corrects the conditions in which gtxoffset register is set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-11net: ethernet: use ip_hdrlen() instead of bit shiftMoon Yeounsu
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)` Therefore, we should use a well-defined function not a bit shift to find the header length. It also compresses two lines to a single line. Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com> Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-10gpio: mlxbf3: Support shutdown() functionAsmaa Mnebhi
During Linux graceful reboot, the GPIO interrupts are not disabled. Since the drivers are not removed during graceful reboot, the logic to call mlxbf3_gpio_irq_disable() is not triggered. Interrupts that remain enabled can cause issues on subsequent boots. For example, the mlxbf-gige driver contains PHY logic to bring up the link. If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver will use a GPIO interrupt to bring up the link. Otherwise, it will use polling. The next time Linux boots and loads the drivers in this order, we encounter the issue: - mlxbf-gige loads first and uses polling while the GPIO10 interrupt is still enabled from the previous boot. So if the interrupt triggers, there is nothing to clear it. - gpio-mlxbf3 loads. - i2c-mlxbf loads. The interrupt doesn't trigger for I2C because it is shared with the GPIO interrupt line which was not cleared. The solution is to add a shutdown function to the GPIO driver to clear and disable all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable(). Fixes: 38a700efc510 ("gpio: mlxbf3: Add gpio driver support") Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@nvidia.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-08-10Merge tag 'nfsd-6.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Two minor fixes for recent changes * tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets sunrpc: avoid -Wformat-security warning
2024-08-10Merge tag 'i2c-for-6.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - Two fixes for SMBusAlert handling in the I2C core: one to avoid an endless loop when scanning for handlers and one to make sure handlers are always called even if HW has broken behaviour - I2C header build fix for when ACPI is enabled but I2C isn't - The testunit gets a rename in the code to match the documentation - Two fixes for the Qualcomm GENI I2C controller are cleaning up the error exit patch in the runtime_resume() function. The first is disabling the clock, the second disables the icc on the way out * tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: testunit: match HostNotify test name with docs i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume i2c: Fix conditional for substituting empty ACPI functions i2c: smbus: Send alert notifications to all devices if source not found i2c: smbus: Improve handling of stuck alerts
2024-08-10Merge tag 'dma-mapping-6.11-2024-08-10' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: - avoid a deadlock with dma-debug and netconsole (Rik van Riel) * tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: avoid deadlock between dma debug vs printk and netconsole
2024-08-10Merge tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull more bcachefs fixes from Kent Overstreet: "A couple last minute fixes for the new disk accounting - fix a bug that was causing ACLs to seemingly "disappear" - new on disk format version, bcachefs_metadata_version_disk_accounting_v3 bcachefs_metadata_version_disk_accounting_v2 accidentally included padding in disk_accounting_key; fortunately, 6.11 isn't out yet so we can fix this with another version bump" * tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs: bcachefs: bcachefs_metadata_version_disk_accounting_v3 bcachefs: improve bch2_dev_usage_to_text() bcachefs: bch2_accounting_invalid() bcachefs: Switch to .get_inode_acl()
2024-08-10wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletionJanne Grunau
wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Cc: stable@vger.kernel.org # 6.4.x Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Neal Gompa <neal@gompa.dev> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240803-brcmfmac_pmksa_del_ssid-v1-1-4e85f19135e1@jannau.net
2024-08-10ALSA: timer: Relax start tick time check for slave timer elementsTakashi Iwai
The recent addition of a sanity check for a too low start tick time seems breaking some applications that uses aloop with a certain slave timer setup. They may have the initial resolution 0, hence it's treated as if it were a too low value. Relax and skip the check for the slave timer instance for addressing the regression. Fixes: 4a63bd179fa8 ("ALSA: timer: Set lower bound of start tick time") Cc: <stable@vger.kernel.org> Link: https://github.com/raspberrypi/linux/issues/6294 Link: https://patch.msgid.link/20240810084833.10939-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-10irqchip/riscv-aplic: Retrigger MSI interrupt on source configurationYong-Xuan Wang
The section 4.5.2 of the RISC-V AIA specification says that "any write to a sourcecfg register of an APLIC might (or might not) cause the corresponding interrupt-pending bit to be set to one if the rectified input value is high (= 1) under the new source mode." When the interrupt type is changed in the sourcecfg register, the APLIC device might not set the corresponding pending bit, so the interrupt might never become pending. To handle sourcecfg register changes for level-triggered interrupts in MSI mode, manually set the pending bit for retriggering interrupt so it gets retriggered if it was already asserted. Fixes: ca8df97fe679 ("irqchip/riscv-aplic: Add support for MSI-mode") Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com
2024-08-10irqchip/xilinx: Fix shift out of boundsRadhey Shyam Pandey
The device tree property 'xlnx,kind-of-intr' is sanity checked that the bitmask contains only set bits which are in the range of the number of interrupts supported by the controller. The check is done by shifting the mask right by the number of supported interrupts and checking the result for zero. The data type of the mask is u32 and the number of supported interrupts is up to 32. In case of 32 interrupts the shift is out of bounds, resulting in a mismatch warning. The out of bounds condition is also reported by UBSAN: UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22 shift exponent 32 is too large for 32-bit type 'unsigned int' Fix it by promoting the mask to u64 for the test. Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
2024-08-09Merge branch 'mlx5-misc-fixes-2024-08-08'Jakub Kicinski
Tariq Toukan says: ==================== mlx5 misc fixes 2024-08-08 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20240808144107.2095424-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09net/mlx5e: Fix queue stats access to non-existing channels splatGal Pressman
The queue stats API queries the queues according to the real_num_[tr]x_queues, in case the device is down and channels were not yet created, don't try to query their statistics. To trigger the panic, run this command before the interface is brought up: ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml --dump qstats-get --json '{"ifindex": 4}' BUG: kernel NULL pointer dereference, address: 0000000000000c00 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 977 Comm: python3 Not tainted 6.10.0+ #40 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08 RSP: 0018:ffff888116be37d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004 RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004 R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000 R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000 FS: 00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x14e/0x3d0 ? exc_page_fault+0x73/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] netdev_nl_stats_by_netdev+0x2a6/0x4c0 ? __rmqueue_pcplist+0x351/0x6f0 netdev_nl_qstats_get_dumpit+0xc4/0x1b0 genl_dumpit+0x2d/0x80 netlink_dump+0x199/0x410 __netlink_dump_start+0x1aa/0x2c0 genl_family_rcv_msg_dumpit+0x94/0xf0 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 genl_rcv_msg+0x116/0x2b0 ? __pfx_netdev_nl_qstats_get_dumpit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x21a/0x340 netlink_sendmsg+0x1f4/0x440 __sys_sendto+0x1b6/0x1c0 ? do_sock_setsockopt+0xc3/0x180 ? __sys_setsockopt+0x60/0xb0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f43757132b0 Code: c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 1d 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 68 c3 0f 1f 80 00 00 00 00 41 54 48 83 ec 20 RSP: 002b:00007ffd258da048 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffd258da0f8 RCX: 00007f43757132b0 RDX: 000000000000001c RSI: 00007f437464b850 RDI: 0000000000000003 RBP: 00007f4375085de0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f43751a6147 </TASK> Modules linked in: netconsole xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse [last unloaded: netconsole] CR2: 0000000000000c00 ---[ end trace 0000000000000000 ]--- RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08 RSP: 0018:ffff888116be37d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004 RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004 R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000 R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000 FS: 00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 7b66ae536a78 ("net/mlx5e: Add per queue netdev-genl stats") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240808144107.2095424-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09net/mlx5e: Correctly report errors for ethtool rx flowsCosmin Ratiu
Previously, an ethtool rx flow with no attrs would not be added to the NIC as it has no rules to configure the hw with, but it would be reported as successful to the caller (return code 0). This is confusing for the user as ethtool then reports "Added rule $num", but no rule was actually added. This change corrects that by instead reporting these wrong rules as -EINVAL. Fixes: b29c61dac3a2 ("net/mlx5e: Ethtool steering flow validation refactoring") Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240808144107.2095424-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09net/mlx5e: Take state lock during tx timeout reporterDragos Tatulea
mlx5e_safe_reopen_channels() requires the state lock taken. The referenced changed in the Fixes tag removed the lock to fix another issue. This patch adds it back but at a later point (when calling mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the Fixes tag. Fixes: eab0da38912e ("net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_work") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Link: https://lore.kernel.org/all/ZplpKq8FKi3vwfxv@gmail.com/T/ Reviewed-by: Breno Leitao <leitao@debian.org> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240808144107.2095424-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09net/mlx5e: SHAMPO, Increase timeout to improve latencyDragos Tatulea
During latency tests (netperf TCP_RR) a 30% degradation of HW GRO vs SW GRO was observed. This is due to SHAMPO triggering timeout filler CQEs instead of delivering the CQE for the packet. Having a short timeout for SHAMPO doesn't bring any benefits as it is the driver that does the merging, not the hardware. On the contrary, it can have a negative impact: additional filler CQEs are generated due to the timeout. As there is no way to disable this timeout, this change sets it to the maximum value. Instead of using the packet_merge.timeout parameter which is also used for LRO, set the value directly when filling in the rest of the SHAMPO parameters in mlx5e_build_rq_param(). Fixes: 99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240808144107.2095424-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09net/mlx5: SD, Do not query MPIR register if no sd_groupTariq Toukan
Unconditionally calling the MPIR query on BF separate mode yields the FW syndrome below [1]. Do not call it unless admin clearly specified the SD group, i.e. expressing the intention of using the multi-PF netdev feature. This fix covers cases not covered in commit fca3b4791850 ("net/mlx5: Do not query MPIR on embedded CPU function"). [1] mlx5_cmd_out_err:808:(pid 8267): ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5) Fixes: 678eb448055a ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20240808144107.2095424-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09Merge branch ↵Jakub Kicinski
'don-t-take-hw-uso-path-when-packets-can-t-be-checksummed-by-device' Jakub Sitnicki says: ==================== Don't take HW USO path when packets can't be checksummed by device This series addresses a recent regression report from syzbot [1]. After enabling UDP_SEGMENT for egress devices which don't support checksum offload [2], we need to tighten down the checks which let packets take the HW USO path. The fix consists of two parts: 1. don't let devices offer USO without checksum offload, and 2. force software USO fallback in presence of IPv6 extension headers. [1] https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10154dbded6d6a2fecaebdfda206609de0f121a9 v3: https://lore.kernel.org/r/20240807-udp-gso-egress-from-tunnel-v3-0-8828d93c5b45@cloudflare.com v2: https://lore.kernel.org/r/20240801-udp-gso-egress-from-tunnel-v2-0-9a2af2f15d8d@cloudflare.com v1: https://lore.kernel.org/r/20240725-udp-gso-egress-from-tunnel-v1-0-5e5530ead524@cloudflare.com ==================== Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-0-f5c5b4149ab9@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09selftests/net: Add coverage for UDP GSO with IPv6 extension headersJakub Sitnicki
After enabling UDP GSO for devices not offering checksum offload, we have hit a regression where a bad offload warning can be triggered when sending a datagram with IPv6 extension headers. Extend the UDP GSO IPv6 tests to cover this scenario. Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09udp: Fall back to software USO if IPv6 extension headers are presentJakub Sitnicki
In commit 10154dbded6d ("udp: Allow GSO transmit from devices with no checksum offload") we have intentionally allowed UDP GSO packets marked CHECKSUM_NONE to pass to the GSO stack, so that they can be segmented and checksummed by a software fallback when the egress device lacks these features. What was not taken into consideration is that a CHECKSUM_NONE skb can be handed over to the GSO stack also when the egress device advertises the tx-udp-segmentation / NETIF_F_GSO_UDP_L4 feature. This will happen when there are IPv6 extension headers present, which we check for in __ip6_append_data(). Syzbot has discovered this scenario, producing a warning as below: ip6tnl0: caps=(0x00000006401d7869, 0x00000006401d7869) WARNING: CPU: 0 PID: 5112 at net/core/dev.c:3293 skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291 Modules linked in: CPU: 0 PID: 5112 Comm: syz-executor391 Not tainted 6.10.0-rc7-syzkaller-01603-g80ab5445da62 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 RIP: 0010:skb_warn_bad_offload+0x166/0x1a0 net/core/dev.c:3291 [...] Call Trace: <TASK> __skb_gso_segment+0x3be/0x4c0 net/core/gso.c:127 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x585/0x1120 net/core/dev.c:3661 __dev_queue_xmit+0x17a4/0x3e90 net/core/dev.c:4415 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0xffa/0x1680 net/ipv6/ip6_output.c:137 ip6_finish_output+0x41e/0x810 net/ipv6/ip6_output.c:222 ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1958 udp_v6_send_skb+0xbf5/0x1870 net/ipv6/udp.c:1292 udpv6_sendmsg+0x23b3/0x3270 net/ipv6/udp.c:1588 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xef/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585 ___sys_sendmsg net/socket.c:2639 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2725 __do_sys_sendmmsg net/socket.c:2754 [inline] __se_sys_sendmmsg net/socket.c:2751 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2751 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] </TASK> We are hitting the bad offload warning because when an egress device is capable of handling segmentation offload requested by skb_shinfo(skb)->gso_type, the chain of gso_segment callbacks won't produce any segment skbs and return NULL. See the skb_gso_ok() branch in {__udp,tcp,sctp}_gso_segment helpers. To fix it, force a fallback to software USO when processing a packet with IPv6 extension headers, since we don't know if these can checksummed by all devices which offer USO. Fixes: 10154dbded6d ("udp: Allow GSO transmit from devices with no checksum offload") Reported-by: syzbot+e15b7e15b8a751a91d9a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/ Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-2-f5c5b4149ab9@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09net: Make USO depend on CSUM offloadJakub Sitnicki
UDP segmentation offload inherently depends on checksum offload. It should not be possible to disable checksum offload while leaving USO enabled. Enforce this dependency in code. There is a single tx-udp-segmentation feature flag to indicate support for both IPv4/6, hence the devices wishing to support USO must offer checksum offload for both IP versions. Fixes: 10154dbded6d ("udp: Allow GSO transmit from devices with no checksum offload") Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-1-f5c5b4149ab9@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09gtp: pull network headers in gtp_dev_xmit()Eric Dumazet
syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Fixes: 999cb275c807 ("gtp: add IPv6 support") Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Harald Welte <laforge@gnumonks.org> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240808132455.3413916-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-09Merge tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: - DFS fix - fix for security flags for requiring encryption - minor cleanup * tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath Fix spelling errors in Server Message Block smb3: fix setting SecurityFlags when encryption is required
2024-08-09Merge tag 'spi-fix-v6.11-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi drivers and a missing registration of a device ID for spidev (which had only been updated for DT cases, causing warnings)" * tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-fsl-lpspi: Fix scldiv calculation spi: spidev: Add missing spi_device_id for bh2228fv spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware spi: hisi-kunpeng: Add validation for the minimum value of speed_hz
2024-08-09binfmt_flat: Fix corruption when not offsetting data startKees Cook
Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it. Fixes: 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") Co-developed-by: Stefan O'Rear <sorear@fastmail.com> Signed-off-by: Stefan O'Rear <sorear@fastmail.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Acked-by: Greg Ungerer <gerg@linux-m68k.org> Link: https://lore.kernel.org/r/20240807195119.it.782-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org>
2024-08-09perf daemon: Fix the build on 32-bit architecturesArnaldo Carvalho de Melo
Noticed with: 1 6.22 debian:experimental-x-mipsel : FAIL gcc version 13.2.0 (Debian 13.2.0-25) builtin-daemon.c: In function 'cmd_session_list': builtin-daemon.c:691:35: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'time_t' {aka 'long long int'} [-Werror=format=] Use inttypes.h's PRIu64 to deal with that. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/ZplvH21aQ8pzmza_@x1 Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-08-09bcachefs: bcachefs_metadata_version_disk_accounting_v3Kent Overstreet
bcachefs_metadata_version_disk_accounting_v2 erroneously had padding bytes in disk_accounting_key, which is a problem because we have to guarantee that all unused bytes in disk_accounting_key are zeroed. Fortunately 6.11 isn't out yet, so it's cheap to fix this by spinning a new version. Reported-by: Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-10rust: x86: remove `-3dnow{,a}` from target featuresMiguel Ojeda
LLVM 19 is dropping support for 3DNow! in commit f0eb5587ceeb ("Remove support for 3DNow!, both intrinsics and builtins. (#96246)"): Remove support for 3DNow!, both intrinsics and builtins. (#96246) This set of instructions was only supported by AMD chips starting in the K6-2 (introduced 1998), and before the "Bulldozer" family (2011). They were never much used, as they were effectively superseded by the more-widely-implemented SSE (first implemented on the AMD side in Athlon XP in 2001). This is being done as a predecessor towards general removal of MMX register usage. Since there is almost no usage of the 3DNow! intrinsics, and no modern hardware even implements them, simple removal seems like the best option. Thus we should avoid passing these to the backend, since otherwise we get a diagnostic about it: '-3dnow' is not a recognized feature for this target (ignoring feature) '-3dnowa' is not a recognized feature for this target (ignoring feature) We could try to disable them only up to LLVM 19 (not the C side one, but the one used by `rustc`, which may be built with a range of LLVMs). However, to avoid more complexity, we can likely just remove them altogether. According to Nikita [2]: > I don't think it's needed because LLVM should not generate 3dnow > instructions unless specifically asked to, using intrinsics that > Rust does not provide in the first place. Thus do so, like Rust did for one of their builtin targets [3]. For those curious: Clang will warn only about trying to enable them (`-m3dnow{,a}`), but not about disabling them (`-mno-3dnow{,a}`), so there is no change needed there. Cc: Nikita Popov <github@npopov.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: x86@kernel.org Link: https://github.com/llvm/llvm-project/commit/f0eb5587ceeb641445b64cb264c822b4751de04a [1] Link: https://github.com/rust-lang/rust/pull/127864#issuecomment-2235898760 [2] Link: https://github.com/rust-lang/rust/pull/127864 [3] Closes: https://github.com/Rust-for-Linux/linux/issues/1094 Tested-by: Benno Lossin <benno.lossin@proton.me> Tested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240806144558.114461-1-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-08-10kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursiveMiguel Ojeda
When calling the `rust_is_available.sh` script, we need to make the jobserver available to it, as commit ecab4115c44c ("kbuild: mark `rustc` (and others) invocations as recursive") explains and did for the others. Otherwise, we get a warning from `rustc` when calling `make rust-analyzer` with parallel jobs, e.g. `-j8`. Using several jobs for that target does not really matter, but developers may call `make` with jobs enabled in all cases. Thus fix it. Fixes: 6dc9d9ca9a72 ("kbuild: rust-analyzer: better error handling") Reviewed-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20240806233559.246705-1-ojeda@kernel.org [ Reworded to add a couple more details mentioned in the list. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-08-10rust: add intrinsics to fix `-Os` buildsMiguel Ojeda
Alice reported [1] that an arm64 build failed with: ld.lld: error: undefined symbol: __extendsfdf2 >>> referenced by core.a6f5fc5794e7b7b3-cgu.0 >>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a >>> referenced by core.a6f5fc5794e7b7b3-cgu.0 >>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a ld.lld: error: undefined symbol: __truncdfsf2 >>> referenced by core.a6f5fc5794e7b7b3-cgu.0 >>> rust/core.o:(<f32>::midpoint) in archive vmlinux.a Rust 1.80.0 or later together with `CONFIG_CC_OPTIMIZE_FOR_SIZE=y` is what triggers it. In addition, x86_64 builds also fail the same way. Similarly, compiling with Rust 1.82.0 (currently in nightly) makes another one appear, possibly due to the LLVM 19 upgrade there: ld.lld: error: undefined symbol: __eqdf2 >>> referenced by core.20495ea57a9f069d-cgu.0 >>> rust/core.o:(<f64>::next_up) in archive vmlinux.a >>> referenced by core.20495ea57a9f069d-cgu.0 >>> rust/core.o:(<f64>::next_down) in archive vmlinux.a Gary adds [1]: > Usually the fix on rustc side is to mark those functions as `#[inline]` > > All of {midpoint,next_up,next_down} are indeed unstable functions not > marked as inline... Fix all those by adding those intrinsics to our usual workaround. [ Trevor quickly submitted a fix to upstream Rust [2] that has already been merged, to be released in Rust 1.82.0 (2024-10-17). - Miguel ] Cc: Gary Guo <gary@garyguo.net> Reported-by: Alice Ryhl <aliceryhl@google.com> Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/455637364 [1] Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Alice Ryhl <aliceryhl@google.com> Tested-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://github.com/rust-lang/rust/pull/128749 [2] Link: https://lore.kernel.org/r/20240806150619.192882-1-ojeda@kernel.org [ Shortened Zulip link. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-08-10kbuild: rust: skip -fmin-function-alignment in bindgen flagsZehui Xu
GCC 14 recently added -fmin-function-alignment option and the root Makefile uses it to replace -falign-functions when available. However, this flag can cause issues when passed to the Rust Makefile and affect the bindgen process. Bindgen relies on libclang to parse C code, and currently does not support the -fmin-function-alignment flag, leading to compilation failures when GCC 14 is used. This patch addresses the issue by adding -fmin-function-alignment to the bindgen_skip_c_flags in rust/Makefile. This prevents the flag from causing compilation issues. [ Matthew and Gary confirm function alignment should not change the ABI in a way that bindgen would care about, thus we did not need the extra logic for bindgen from v2. - Miguel ] Link: https://lore.kernel.org/linux-kbuild/20240222133500.16991-1-petr.pavlu@suse.com/ Signed-off-by: Zehui Xu <zehuixu@whu.edu.cn> Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240731134346.10630-1-zehuixu@whu.edu.cn [ Reworded title. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-08-09Merge tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Weekly regular fixes, mostly amdgpu with i915/xe having a few each, and then some misc bits across the board, seems about right for rc3 time. client: - fix null ptr deref bridge: - connector: fix double free atomic: - fix async flip update panel: - document panel omap: - add config dependency tests: - fix gem shmem test drm buddy: - Add start address to trim function amdgpu: - DMCUB fix - Fix DET programming on some DCNs - DCC fixes - DCN 4.0.1 fixes - SMU 14.0.x update - MMHUB fix - DCN 3.1.4 fix - GC 12.0 fixes - Fix soft recovery error propogation - SDMA 7.0 fixes - DSC fix xe: - Fix off-by-one when processing RTP rules - Use dma_fence_chain_free in chain fence unused as a sync - Fix PL1 disable flow in xe_hwmon_power_max_write - Take ref to VM in delayed dump snapshot i915: - correct dual pps handling for MTL_PCH+ [display] - Adjust vma offset for framebuffer mmap offset [gem] - Fix Virtual Memory mapping boundaries calculation [gem] - Allow evicting to use the requested placement - Attempt to get pages without eviction first" * tag 'drm-fixes-2024-08-10' of https://gitlab.freedesktop.org/drm/kernel: (31 commits) drm/xe: Take ref to VM in delayed snapshot drm/xe/hwmon: Fix PL1 disable flow in xe_hwmon_power_max_write drm/xe: Use dma_fence_chain_free in chain fence unused as a sync drm/xe/rtp: Fix off-by-one when processing rules drm/amdgpu: Add DCC GFX12 flag to enable address alignment drm/amdgpu: correct sdma7 max dw drm/amdgpu: Add address alignment support to DCC buffers drm/amd/display: Skip Recompute DSC Params if no Stream on Link drm/amdgpu: change non-dcc buffer copy configuration drm/amdgpu: Forward soft recovery errors to userspace drm/amdgpu: add golden setting for gc v12 drm/buddy: Add start address support to trim function drm/amd/display: Add missing program DET segment call to pipe init drm/amd/display: Add missing DCN314 to the DML Makefile drm/amdgpu: force to use legacy inv in mmhub drm/amd/pm: update powerplay structure on smu v14.0.2/3 drm/amd/display: Add missing mcache registers drm/amd/display: Add dcc propagation value drm/amd/display: Add missing DET segments programming drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd ...
2024-08-09nvdimm/pmem: Set dax flag for all 'PFN_MAP' casesZhihao Cheng
The dax is only supported on pfn type pmem devices since commit f467fee48da4 ("block: move the dax flag to queue_limits"). Trying to mount DAX filesystem fails with this error: mount: : wrong fs type, bad option, bad superblock on /dev/pmem7, missing codepage or helper program, or other error. dmesg(1) may have more information after failed mount system call. dmesg: EXT4-fs (pmem7): DAX unsupported by block device. Fix the problem by adding dax flag setting for the missed case. Fixes: f467fee48da4 ("block: move the dax flag to queue_limits") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Link: https://patch.msgid.link/20240809031155.2837271-1-chengzhihao1@huawei.com Signed-off-by: Ira Weiny <ira.weiny@intel.com>
2024-08-09bcachefs: improve bch2_dev_usage_to_text()Kent Overstreet
Add a line for capacity Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-09bcachefs: bch2_accounting_invalid()Kent Overstreet
Implement bch2_accounting_invalid(); check for junk at the end, and replicas accounting entries in particular need to be checked or we'll pop asserts later. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-08-09Merge tag 'bitmap-6.11-rc' of https://github.com/norov/linuxLinus Torvalds
Pull cpumask fix from Yury Norov: "Fix for cpumask merge" [ Mea culpa, this was my mismerge due to too much cut-and-paste - Linus ] * tag 'bitmap-6.11-rc' of https://github.com/norov/linux: cpumask: Fix crash on updating CPU enabled mask
2024-08-09Merge tag 'pm-6.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Change the default EPP (energy-performence preference) value for the Emerald Rapids processor in the intel_pstate driver. Thisshould improve both the performance and energy efficiency (Pedro Henrique Kopper)" * tag 'pm-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Update Balance performance EPP for Emerald Rapids
2024-08-09Merge tag 'asm-generic-fixes-6.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "There are two more changes to the syscall.tbl conversion: the '__NR_newfstat' in the previous bugfix was a mistake and gets reverted now, after triple-checking that the contents are now back to what they were on all architectures. The __NR_nfsservctl definition is not really needed but came up in the same discussion as it had previously been defined in uapi/asm-generic/unistd.h and tested for in user space. There are a few more symbols that used to be defined in the old unistd.h file, but that are never defined on any other architecture using syscall.tbl format. These used to be needed inside of the kernel: __NR_syscalls __NR_arch_specific_syscall __NR3264_* Searching for these on https://codesearch.debian.net/ shows a few packages (rustc, golang, clamav, libseccomp, librsvg, strace) that duplicate all the macros from asm/unistd.h, but nothing that actually uses the macros, so I concluded that they are fine to omit after all" * tag 'asm-generic-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: add back legacy __NR_nfsservctl macro syscalls: fix fstat() entry again
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:32:47 +0000